Search Results

Search found 16987 results on 680 pages for 'second'.

Page 120/680 | < Previous Page | 116 117 118 119 120 121 122 123 124 125 126 127  | Next Page >

• Windows 7 boot problem on a Lenovo Thinkpad Z61m 9450HAG

  - by Matt Taylor

  I recently did a full upgrade of Windows 7 on my Thinkpad. Everything worked fine after up until the second reboot (the first reboot after some updates installed worked OK). At second reboot time the system would just black screen before the Windows logo appears. Disk/wireless/power/battery lights are all lit and the disk light is active (flickering). However, if I remove my battery and boot with just power it boots fine and quickly, and everything is OK. Any help on why this won't boot with battery plugged in is greatly appreciated. I need to take this battery out on the road/trains, etc. A little more detail on this story. The battery I had inserted when doing the (failed) boot was a long life battery. I have not tried inserting this battery when Windows is logged in. I have another (normal life) battery that I have charged up within Windows. It has just got to 100% and I am about to reboot with it in. I am using the Lenovo power manager to diagnose the battery - all seems OK. I will report back shortly as to the outcome. OK, so I chose the reboot option from within Windows, the machine seemed to shutdown okay, but then stalled. It didn't turn off completely and didn't reboot, but just sat, with the fan humming, somewhere in between! I had to hold the power button in for a few seconds until the fan stopped and then hit the power button again to boot the machine from fresh. One good thing, with this battery (the normal one) it booted into Windows 7 the first time with a battery! So, now I have rebooting issues. I have 3 errors in the event log: A timeout was reached (30000 milliseconds) while waiting for the lxdxCATSCustConnectService service to connect. The lxdxCATSCustConnectService service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion. The following boot-start or system-start driver(s) failed to load: cdrom Any thoughts?

  Read the article

• Wireless router that supports Bonjour between wire- and wireless- connected machines

  - by cefstat

  At home I have an ADSL modem that I use also as router. For the record, it is a DavoLink DV-2020 provided by Tele2 in the Netherlands. It turns out that if a computer is connected with a cable to the router and another computer is connected wirelessly, then they cannot see each other's services that are advertised through Bonjour (Apple's service discovery protocol, an implementation of Zeroconf). The combinations wired/wired and wireless/wireless work fine. This means that somehow wire- and wireless- connected machines are on different physical networks although their IPs are in the same range (192.168.1.*). The modem in question doesn't provide many options that I could play with. So, I was thinking of buying a second router to connect to the modem, and then connect all my machines to this second router. The problem is that I am afraid that I will have again the same problem. I am looking for suggestions on routers that offer the functionality I want (Bonjour between wired and wireless connections). I suppose that one solution would be Apple's Airport Extreme Base Station but at 160€ it is ridiculously expensive. Any other options out there? And why is it so difficult to find in the technical characteristics if wired and wireless connections are on the same physical network?

  Read the article

• Ram question in VMware Server 2

  - by ToreTrygg

  Hi, I understand from the VMware Server 2 documentation that VMware Server 2 is capable of running a 64-bit guest OS underneath a 32-bit host OS, as long as the hardware running the box is 64-bit capable. Here's my situation. We currently have an underutilized XEON X3220 Quad Core 64bit Server, running Server 2003, 32-bit and 2gb of RAM (the motherboard is capable of 8gb ram). The server is currently used mainly for file and print services. It is also running Active Directory, Novell eDirectory and Groupwise 6.5. We are planning a micration to Microsoft Exchange, so the Novell eDirectory and Groupwise services will eventually be purged from this box, leaving only Active Directory, File and Print services. Being that this server is underutilized we are hoping to save hardware costs and virtualize our new Exchange investment. My question is this. Will VMware allow access to the "invisible" extra memory that Windows 32-bit won't see. Meaning, if we increase the full amount of system ram to 8gb (yes, I know the 32-bit host OS will only see a maximum of 4gb), will I be able to assign maybe 5gb to the new Server 2008 64-bit OS running Exchange and leave 3gb for the Guest OS (or maybe even a 6, 2 split). The second part of that would be, would it be better to just convert the main OS currently running to an image, convert the machine itself to ESXi and run both OSes as images under ESXi. Downtime for this box is critical, so my preference is most definitly with the first option because it presents very minimal downtime. Doing the second would make downtime quite a few hours to image the machine and then convert the image to a VMware Image.

  Read the article

• AWS VPC ELB vs. Custom Load Balancing

  - by CP510

  So I'm wondering if this is a good idea. I have a Amazon AWS VPC setup with a public and private subnets. So I all ready get the Internet Gateway and NAT. I was going to setup all my web servers (Apache2 isntances) and DB servers in the private subnet and use a Load Balancer/Reverse Proxy to pick up requests and send them into the private subnets cluster of servers. My question then, is Amazons ELB's a good use for these, or is it better to setup my own custom instance to handle the public requests and run them through the NAT using nginx or pound? I like the second option just for the sake of having a instance I can log into and check. As well as taking advantage of caching and fail2ban ddos prevention, as well as possibly using fail safes to redirect traffic. But I have no experience with their ELB's, so I thought I'd ask your opinions. Also, if you guys have an opinion on this as well, would using the second option allow me to only have 1 public IP address and be able to route SSH connections through port numbers to respective instances? Thanks in advance!

  Read the article

• How to convert an MKV to AVI with minimal loss

  - by Linux Jedi

  To convert an MKV to AVI, I do two things. The first thing I do is this: ffmpeg -i filename.mkv -vcodec copy -acodec copy output.avi This converts the MKV to an AVI, but the problem is that the video does not play smoothly for some reason. That's fine, because if I do one more thing it gets fixed: ffmpeg -i output.avi -vcodec mpeg4 -b 4000k -acodec mp2 -ab 320k converted.avi After I do this then the file plays without problem. I had success doing it this way for one file, but then I tried it on another file, and there is a slight, but noticeable loss in video quality. This is the output I get when doing the second step: FFmpeg version 0.6.1, Copyright (c) 2000-2010 the FFmpeg developers built on Dec 29 2010 18:02:10 with gcc 4.2.1 (Apple Inc. build 5664) configuration: libavutil 50.15. 1 / 50.15. 1 libavcodec 52.72. 2 / 52.72. 2 libavformat 52.64. 2 / 52.64. 2 libavdevice 52. 2. 0 / 52. 2. 0 libswscale 0.11. 0 / 0.11. 0 Seems stream 0 codec frame rate differs from container frame rate: 359.00 (359/1) -> 29.92 (359/12) Input #0, avi, from 'output.avi': Metadata: ISFT : Lavf52.64.2 Duration: 00:04:17.21, start: 0.000000, bitrate: 3074 kb/s Stream #0.0: Video: mpeg4, yuv420p, 704x480 [PAR 229:189 DAR 5038:2835], 29.92 fps, 29.92 tbr, 29.92 tbn, 359 tbc Stream #0.1: Audio: vorbis, 48000 Hz, stereo, s16 Output #0, avi, to 'nidome_no_kanojo.avi': Metadata: ISFT : Lavf52.64.2 Stream #0.0: Video: mpeg4, yuv420p, 704x480 [PAR 229:189 DAR 5038:2835], q=2-31, 4000 kb/s, 29.92 tbn, 29.92 tbc Stream #0.1: Audio: mp2, 48000 Hz, stereo, s16, 320 kb/s Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 I just used arbitrarily large settings on the second step and it worked nicely before but not in this case. What settings should I use?

  Read the article

• How to interpret iozone values

  - by Henno

  I ran a test to measure my I/O IOPS on Linux: iozone -s 4g -r 2k -r 4k -r 8k -r 16k -r 32k -O -b /tmp/results.xls iozone claims that output is in operations per second yet the numbers are too big for that to be plausible. I'm observing some 320 CMDs/s maximum on vmware esx console (esxtop, then v). File size set to 4194304 KB Record Size 2 KB Record Size 4 KB Record Size 8 KB Record Size 16 KB Record Size 32 KB OPS Mode. Output is in operations per second. Command line used: iozone -s 4g -r 2k -r 4k -r 8k -r 16k -r 32k -O -b tmpresults.xls Time Resolution = 0.000001 seconds. Processor cache size set to 1024 Kbytes. Processor cache line size set to 32 bytes. File stride size set to 17 * record size. random random bkwd record stride KB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 4194304 2 19025 5580 27581 29848 284 198 415 1103217 1498 18541 4340 24245 25618 4194304 4 15650 21942 18962 21068 252 1198 193 976164 1677 22802 23093 21089 21232 4194304 8 11121 11638 10273 10165 247 1196 202 625020^C The test ran for 15 hours before I pressed ^C. Is that ordinary expectation for such command line (dedicated 4 drive RAID10 LUN, 10k RPM SAS drives in EMC CX300)?

  Read the article

• Copy past speed very slow for a large number of tiny files on Windows but not on linux

  - by Arno2501

  I've got this folder which contains 15'000 of tiny images (around 400 bytes each). If I copy past this folder on my laptop (Windows 7, i7 latest gen, superfast ssd) it takes about 30 seconds (yes for 7 megs !!!) the average transfer rate is 400 KBytes / second which is so slow. I mean my usual transfer rate is more like hundreds of MBytes per second !!! I get the same problem on my servers (Windows 2003, 2008 /r2) and on every Windows box that I could get my hands on. On the other hand if I do the same on a linux box (debian base, Ext3 FS) (which runs on the same SAN than all the windows servers I've tested) It's nearly instantaneous !!! I'm pretty sure the size / number of the files may stress such filesystem more than another but such differences !? Why is that ? Why is it so slow on the windows boxes (more that 30 sec for 7 MB) and so fast on the linux ones (one sec or so) (I mean this was not a hardlink that I've created it was a true copy). Is it a normal behaviour or something unusual ?

  Read the article

• Server 2003 PDC DNS not working..Failover server is...

  - by Seth

  In the midst of trying to utilize proc power, i create a fault tolerant DNS server a while ago. Since, Ive been trying to add another controller for exchange. So I thought I would revert back to a single primary DNS for the meantime and now Im balancing on a thread. The server i thought I uninstalled DNS, is still acting as DNS. And now the PDC does not resolve. Can anybody walk me through, Im overwhelmed and cant think straight... Im afraid if anyone restarts their machine they wont have internet. Update Ok so from the beginning. I was configuring Exchange on a new server 2008. How it happened I dont know, but it started to not resolve DNS. (exclamation mark on NIC) even though everything was static. So ultimately I decided to remove the server from the problem, because I noticed DNS was in disarray if I used the DNS IP of the first server. This is when I tested with nslookup on each DNS server. I had uninstalled DNS from the second server, but nslookup was still resolving with that IPaddress, which has me all wound up cause I dont understand. So, since the first DNS server isn't resolving, Im assuming if the second one isnt configured right I'll loose internet. Im just confused and dont know where to start troubleshooting...

  Read the article

• Possible boot conflict?

  - by Evan Kroske

  I was installing Ubuntu on a computer on which Windows XP was already installed. The computer has multiple hard drive bays, so I decided to remove the XP HDD and install Ubuntu on a blank HDD when it was the only HDD in the system. Unfortunately, if I now try to boot Ubuntu with the Windows XP drive in the second slot, nothing will boot. However, if Windows XP is in the first slot, it will boot fine. Can anybody explain why this happens? When I was checking out the BIOS to see if something was messed up, I discovered that when Ubuntu is in the first slot, the BIOS doesn't recognize any HDDs. However, if XP is in the first slot, the BIOS recognizes both drives. Any hypotheses about why this happens? Edit: Here's the setup. I have an old server with seven SCSI HDD slots. I have five identical 68 Gb SCSI drives, but I can keep only two plugged in. XP is still installed on the first drive, but I reinstalled Ubuntu on the second drive and had Grub overwrite the XP bootloader on the first drive. Now, the setup works fine, and I can use Grub to load either XP or Ubuntu. However, if I plug in another identical blank HDD in the third slot, the computer recognizes only the XP drive and doesn't boot. Grub starts to load, then gives me a "disk not found" error. Running ls from the grub rescue prompt only shows one drive with two partitions. I guess this is a BIOS problem, but I'd still like to know what triggers it. What about a blank drive could cause the BIOS to freak out?

  Read the article

• lvm mirroring space unavailable.

  - by Bryan Ward

  I am trying to migrate my data on lvm to two new disks, and setup mirroring between the two. I have successfully migrated all of the data to the first of the two disks, leaving the second one completely available as a mirror. I verified this using pvdisplay -m /dev/sd{g,h}1 --- Physical volume --- PV Name /dev/sdg1 VG Name vg PV Size 931.51 GiB / not usable 3.19 MiB Allocatable yes PE Size 4.00 MiB Total PE 238466 Free PE 82866 Allocated PE 155600 PV UUID v2nc3j-EFBR-QpuG-xgro-Rm59-fmu6-IB3QcR --- Physical Segments --- Physical extent 0 to 49999: Logical volume /dev/vg/videos Logical extents 0 to 49999 Physical extent 50000 to 99999: Logical volume /dev/vg/home Logical extents 0 to 49999 Physical extent 100000 to 129999: Logical volume /dev/vg/music Logical extents 0 to 29999 Physical extent 130000 to 155599: Logical volume /dev/vg/videos Logical extents 50000 to 75599 Physical extent 155600 to 238465: FREE --- Physical volume --- PV Name /dev/sdh1 VG Name vg PV Size 931.51 GiB / not usable 3.19 MiB Allocatable yes PE Size 4.00 MiB Total PE 238466 Free PE 238466 Allocated PE 0 PV UUID LuTrem-WcsZ-qw7l-2CDS-lLKI-wdq0-QEXhLf --- Physical Segments --- Physical extent 0 to 238465: FREE Then when I try to mirror the home logical volume for example, it says that I do not have sufficient space. I used lvconvert -m1 vg/home and the output was: Insufficient suitable allocatable extents for logical volume : 50000 more required Unable to allocate extents for mirror(s). This puzzling to me because it appears as if there is plenty of space on the second disk to mirror. Is there something I have done wrong here? Or is there a way to explicitly tell LVM where to put each leg of the mirror? I'm using lvm2.

  Read the article

• Missing BootMgr in Vista

  - by Selase

  Am in really deep trouble here and would use every advice available from everyone out there.. Am message just pooped on my screen and i had to restart my laptop. upon restarting the BootMgr got corrupted. Am running Windows Vista 32 bit by the way.. i got onto Google with a friend's PC and found two basic ways of fixing it. the first one that requires windows to automatically fix it using Startup repair ends up with the error message : "Startup REpair cannot repair this computer automatically" the second option that requires me to rebuild the BCD scans my system and finds the operating system on drive D:\Windows which i believe should be C:. if i hit Y(yes) for the rebuild process to take place i get the message "The required system device cannot be found" i then try the second option which requires me to recreate the BCD Store ends up with an error message that says "The store export operation has failed. The requested system device cannot be found". proceeding from there is meaningless since the system device cannot be found. I somehow believe the device cannot be found because its identifying the windows installation on D: instead of C: but how to change that i have no idea... I dot know how it happens to identify an O/S on D: when there's none there... How do i go about fixing the BootMgr? I have very important files on my system and cant afford to reinstall windows... i really need to fix this..Please help...

  Read the article

• Can two mocha for After Effects X-Spline Layers be merged ?

  - by George Profenza

  Hello, I'm new to mocha for After Effects, but like the auto tracking feature. There are a few markers I'm adding, but there's one which is giving me a bit of a headache. I'm tracking a circle that moves around a larger object, so it moves in front of it initially, then behind, being occluded by the larger object, then in front again. I tried to track the circle in the first part(when it's in front, before being occluded) and in the second part(when it's in front again, coming out on the other side of the large object) using a single X-Spline. The problem is the second part starts in a different location and I don't know how to 'move' the X-Spline to the new position and track from there, without affecting the previous keyframes. As a workaround I use two X-Spline Layers, export the data to .txt files, then manually merge the two files into a new one containing keyframes from both X-Spline Layers. Is there an easier way to do this (either merging two X-Spline Layer, or using a single X-Spline Layer that can move to a new location without affecting previous keyframes) ? Any suggestion would help.

  Read the article

• Why does clicking on Windows 7 Printer Properties Result In Driver Not Installed?

  - by octopusgrabbus

  The question I need to ask is has anyone heard of getting a "driver not installed" error when clicking on a printer's properties on Windows 7, and is there a workaround? Here are the details of the problem. One of our users has a Windows 7 desktop, and an HP LaserJet 4050 T connected to via a parallel-to-usb converter. The PLC5 universal driver was installed for series 4050 printers. I needed to install the PLC 6 driver, which completed successfully. The user is an administrator of the system, and I was prompted to and accepted running as Administrator to install the driver. After the install, I went to see the 4050's properties and was prompted that the PLC6 driver was not installed. I believe the PLC6 driver was installed, because the PLC5 driver resulted in receiving an official HP error page indicating the printer was "not set up for collating" as the second page of printing two copies of a one page email. This problem did not occur with the PLC 6 driver. Oddly enough, setting back to PLC5 produced the same error about the PLC5 driver not being installed. I ignored/dismissed the error box (did not re-install the driver), and reproduced the error, with the second page being the HP not set up for collating error page. Any thoughts on what is causing this and how to clear it would be appreciated. The closest fix I could find was on a Microsoft tech page, and they had me clear winsock out of a Administrator run command line, followed by a reboot. That did not fix the problem. I have also found this http://social.technet.microsoft.com/Forums/windowsserver/en-US/5101195b-3aca-4699-9a06-db4578614e2d/changing-driver-results-in-printer-driver-is-not-installed-error-on-server-2008?forum=winserverprint and will look into trying some of these suggestions, which appear to me to be a "shotgun" approach to fixing the problem.

  Read the article

• Apache2 VirtualHosts 403 Oddity

  - by Carson C.

  I'm sure this is something I should already understand, but I'm finding myself confused. The configs in play add up to this: NameVirtualHost *:80 Listen 80 <VirtualHost *:80> <Directory /> Options FollowSymLinks AllowOverride None Order deny,allow Deny from all </Directory> </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] ServerName domain.tld ServerAlias *.domain.tld DocumentRoot /var/www/domain.tld <Directory /var/www/domain.tld> Options -Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> DNS is working correctly. The issue is, every variant of http://*.domain.tld/ (including http://domain.tld/) works correctly, except http://www.domain.tld/ which throws a 403. The logs state: client denied by server configuration: /etc/apache2/htdocs If I remove the first VirtualHost block from play, everything works as expected including http://www.domain.tld. This leads me to believe that for some reason, Apache is not considering www.domain.tld to match the second VirtualHost block, and is thereby falling back to deny all. This seems wrong. Shouldn't the second block match www.domain.tld? I've been able to resolve this, but I still don't understand why. In my original configs, I was using the real ip address of the server instead of *. Switching all instances to * as shown above made everything work as expected. Does this have something to do with the way browsers request resources?

  Read the article

• Why does my exchange message filtering rule not work?

  - by Jon Cage

  I have two rules set up to sort incoming bug reports. The first is specific to a single device: Apply this rule after the message arrives sent to SMS Distribution and with <source_device_number>: in the body move it to the BugReports\<source_device_number> folder ..and the second is a catch-all for everything else: Apply this rule after the message arrives sent to SMS Distribution move it to the BugReports folder For some reason though, the first rule never seems to act even though it's higher in the list. So for some reason an email like the following doesn't seem to get caught by the first rule: From: <SourceDeviceUID> To: SMS Distributor Subject: Message from <SourceDeviceUID> Message: <source_device_number>: Device encountered a problem. Details below... ...where <source_device_number> is an integer. The second rule works fine. But for some high-priority devices, I want them automatically sorted. Why might that first rule fail?

  Read the article

• Recover data from a Thecus N4100 NAS jbod partition

  - by TimothyP

  I have a Thecus N4100 NAS wich had a 2TB drive in it configured as jbod partition. Later I tried adding a second drive to expand the available space. I added it to the jbod configuration but I did not get any extra space. Then I tried removing the second drive but then the NAS system indicated the jbod configuration was damaged. After a reboot it told me there is no configuration and I need to create a new RAID/jbod configuration and that I would lose all data on the drive. Of course I did not do this, I took the 2TB drive and checked with Linux if the partition was still there and it is... completely intact. I found that linux recognizes it as a /dev/mdX device and that I should be able to mount it but I don't know the file system type. Anyway.... is there a way to recover the data? Since everything has always been on a single drive it should all be there right? I can connect the drive to Windows , Linux or MacOS so whatever gets the job done.

  Read the article

• AWS elastic load balancer basic issues

  - by Jones

  I have an array of EC2 t1.micro instances behind a load balancer and each node can manage ~100 concurrent users before it starts to get wonky. i would THINK if i have 2 such instances it would allow my network to manage 200 concurrent users... apparently not. When i really slam the server (blitz.io) with a full 275 concurrents, it behaves the same as if there is just one node. it goes from 400ms response time to 1.6 seconds (which for a single t1.micro is expected, but not 6). So the question is, am i simply not doing something right or is ELB effectively worthless? Anyone have some wisdom on this? AB logs: Loadbalancer (3x m1.medium) Document Path: /ping/index.html Document Length: 185 bytes Concurrency Level: 100 Time taken for tests: 11.668 seconds Complete requests: 50000 Failed requests: 0 Write errors: 0 Non-2xx responses: 50001 Total transferred: 19850397 bytes HTML transferred: 9250185 bytes Requests per second: 4285.10 [#/sec] (mean) Time per request: 23.337 [ms] (mean) Time per request: 0.233 [ms] (mean, across all concurrent requests) Transfer rate: 1661.35 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 1 2 4.3 2 63 Processing: 2 21 15.1 19 302 Waiting: 2 21 15.0 19 261 Total: 3 23 15.7 21 304 Single instance (1x m1.medium direct connection) Document Path: /ping/index.html Document Length: 185 bytes Concurrency Level: 100 Time taken for tests: 9.597 seconds Complete requests: 50000 Failed requests: 0 Write errors: 0 Non-2xx responses: 50001 Total transferred: 19850397 bytes HTML transferred: 9250185 bytes Requests per second: 5210.19 [#/sec] (mean) Time per request: 19.193 [ms] (mean) Time per request: 0.192 [ms] (mean, across all concurrent requests) Transfer rate: 2020.01 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 1 9 128.9 3 3010 Processing: 1 10 8.7 9 141 Waiting: 1 9 8.7 8 140 Total: 2 19 129.0 12 3020

  Read the article

• centos 6.3 kvm external ip forwarding to guests

  - by user1111702

  I have a centos 6.3 server with kvm installed. The server has 4 external ips and one NIC. 176.9.xxx.xx1 176.9.xxx.xx2 176.9.xxx.xx3 176.9.xxx.xx4 I use the following configuration ifcfg-eth0 as slave to ifcfg-br0 the configuration in ifcfg-eth0 is DEVICE=eth0 ONBOOT=yes BRIDGE=br0 HWADDR=14:da:e9:b3:8b:99 and in the ifcfg-br0 DEVICE=br0 TYPE=Bridge BOOTPROTO=static BROADCAST=176.9.xxx.xxx IPADDR=176.9.xxx.xx1 NETMASK=255.255.255.0 SCOPE="peer 176.9.xxx.xxx" and I have 3 more aliases for br0 , br0:1 to get the trafic from the second external ip DEVICE=br0:1 IPADDR=176.9.xxx.xx2 NETMASK=255.255.255.248 ONBOOT=yes br0:2 to get the trafic from the third external ip DEVICE=br0:1 IPADDR=176.9.xxx.xx3 NETMASK=255.255.255.248 ONBOOT=yes br0:3 to get the trafic from the second external ip DEVICE=br0:1 IPADDR=176.9.xxx.xx4 NETMASK=255.255.255.248 ONBOOT=yes The above settings work fine and I recieve the trafic from all the external ips. My problem is that I want to pass the trafic from external ip to specific virtual guest on my server. ie trafic that comes from 176.9.xxx.xxx2 must pass to virtual machine 1 176.9.xxx.xxx3 must pass to virtual machine 2 176.9.xxx.xxx4 must pass to virtual machine 3 Can you please help me how to achieve this ? What are the settings on the host and what should I do to the guests. Thank you in advance

  Read the article

• Running multiple copies of openssh-server (sshd) on Ubuntu

  - by cecilkorik

  I may be attacking this problem the wrong way, if so let me know. I have a server which is available through SSH from both the public internet and the local LAN. I would like to have two very different security policies for each, by running two copies of sshd with two different sshd_config files each on a different port. Some of the things I'd like to change is to allow password or public-key authentication on the LAN, but public-key only from the internet. All (real) users could login from the LAN side, but only certain authorized users would be individually whitelisted to login through the internet. As far as I can tell this requires having two different SSH daemons running on different ports with different sshd_configs. I am fine with the different ports part, I can easily forward port 22 to any port I want through my firewall. So my question is what is the best way to actually START the second sshd under Ubuntu 10.04 LTS. Is there a recommended way to do something like this? Surely I am not the first person with this sort of need. I have a bit of experience with upstart, and I can manually hack the second sshd into /etc/init/ssh.conf I suppose but I'm not sure if that will get overwritten by the package. However I do it, It's important to ensure both sshd processes always get restarted after any automatic or manual upgrade of the openssh-server package. Thanks in advance.

  Read the article

• MySQL is killing the server IO.

  - by OneOfOne

  I manage a fairly large/busy vBulletin forums (running on gigenet cloud), the database is ~ 10 GB (~9 milion posts, ~60 queries per second), lately MySQL have been grinding the disk like there's no tomorrow according to iotop and slowing the site. The last idea I can think of is using replication, but I'm not sure how much that would help and worried about database sync. I'm out of ideas, any tips on how to improve the situation would be highly appreciated. Specs : Debian Lenny 64bit ~12Ghz (6 cores) CPU, 7520gb RAM, 160gb disk. Kernel : 2.6.32-4-amd64 mysqld Ver 5.1.54-0.dotdeb.0 for debian-linux-gnu on x86_64 ((Debian)) Other software: vBulletin 3.8.4 memcached 1.2.2 PHP 5.3.5-0.dotdeb.0 (fpm-fcgi) (built: Jan 7 2011 00:07:27) lighttpd/1.4.28 (ssl) - a light and fast webserver PHP and vBulletin are configured to use memcached. MySQL Settings : [mysqld] key_buffer = 128M max_allowed_packet = 16M thread_cache_size = 8 myisam-recover = BACKUP max_connections = 1024 query_cache_limit = 2M query_cache_size = 128M expire_logs_days = 10 max_binlog_size = 100M key_buffer_size = 128M join_buffer_size = 8M tmp_table_size = 16M max_heap_table_size = 16M table_cache = 96 Other : > vmstat procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 9 0 73140 36336 8968 1859160 0 0 42 15 3 2 6 1 89 5 > /etc/init.d/mysql status Threads: 49 Questions: 252139 Slow queries: 164 Opens: 53573 Flush tables: 1 Open tables: 337 Queries per second avg: 61.302. Edit Additional info.

  Read the article

• Ubuntu purple splash screen with blinking pixels?

  - by joxnas

  I had ubuntu 9.10 I upgraded to 10.04 after solving some problems (freeze at boot). Since then, I don't have the ubuntu's logo showing up when I boot, but a purple screen with some blinking pixels. I didn't care much about it... but today my computer took too long at that screen (normally it was just 1/4 second, but today it was like a minute..). And it happened like 4 or 5 times in a row (Only at the 5th time I realised that it was not freezing up, but it simply would took more time) After a reboot, it is again 1/4 second of purple screen but I don't want this problem to return.. so I want to get rid of the purple screen (I think it is an indicator of the problem) Well, I already installed the graphic drivers (going to system admnistration hardware drivers). But it didn't solve anything. (I don't know if it is even related) I searched in google, found something old (2006) and I think it maybe has some relation with my problems .. http://ubuntuforums.org/archive/index.php/t-294692.html But couldn't understand the conversation (i'm a linux novice) Sorry for my horrible english.. I would appreciate any help! My hardware: ATI Mobility Radeon 4650 HD P7450 2.13Ghz Core 2 Duo

  Read the article

• NFS confusion - writing many small files

  - by Antonis Christofides

  I have a Debian squeeze amd64 which is at the same time a NFS4 server and client (it mounts itself through NFS4). The local directory that leads directly to disk is /nfs4exports/mydir, whereas /nfs4mounts/mydir is the same thing mounted through NFS, using the machine's external IP address. Here is the line from fstab: 176.9.116.102:/mydir /nfs4mounts/mydir nfs4 soft 0 0 I have an application that writes many small files. If I write directly to /nfs4exports/mydir, it writes thousands of files per second; but if I write to /nfs4mounts/mydir, it writes 4 files per second or so. I can greatly increase speed if I add async to /etc/exports. (Writing a single large file to the NFS directory goes at more than 100 MB/s.) I am confused by the description of async in NFS. If my application accesses the local directory, system calls like write and close return even if caches have not been flushed to permanent storage. Apparently this is not true with NFS sync behaviour. However, with NFS async behaviour, even calls like fsync are ignored. Isn't it possible to work like local files, i.e. generally work asynchronously, but honour fsync and O_SYNC?

  Read the article

• Using URL rewrite module for http to https redirect

  - by johnnyb10

  Following ruslany's suggestion on the URL Rewrite Tips page here, I'm trying to use URL Rewrite to redirect http:// requests for my site to https://. I've written and tested the rule using a test site I set up, and so now the final piece is to create a second site (http) to redirect to my https site. (I need to use a second site because I don't want to uncheck the "Require SSL encryption" checkbox on my existing site.) I'm an IIS newbie so my question is: how do I do this? Should I create a site with the same name and host header, only it will be bound to http? Will IIS let me create a site with the same name? I don't want to screw anything up with my existing site (which is a SharePoint site, currently used by external users). That site currently has http and https bound to it. So my assumption is that, using ISS (not SharePoint), I will create a new site (http only) with the same name and host header as my existing site, and add the URL Rewrite rule to the http site. And then I guess I should remove the http binding from my existing site? Does that seem correct? Any advice, gotchas, etc., would be appreciated. Thanks.

  Read the article

• Scaling databases with cheap SSD hard drives

  - by Dennis Kashkin

  Hey guys! I hope that many of you are working with high traffic database-driven websites, and chances are that your main scalability issues are in the database. I noticed a couple of things lately: Most large databases require a team of DBAs in order to scale. They constantly struggle with limitations of hard drives and end up with very expensive solutions (SANs or large RAIDs, frequent maintenance windows for defragging and repartitioning, etc.) The actual annual cost of maintaining such databases is in $100K-$1M range which is too steep for me :) Finally, we got several companies like Intel, Samsung, FusionIO, etc. that just started selling extremely fast yet affordable SSD hard drives based on SLC Flash technology. These drives are 100 times faster in random read/writes than the best spinning hard drives on the market (up to 50,000 random writes per second). Their seek time is pretty much zero, so the cost of random I/O is the same as sequential I/O, which is awesome for databases. These SSD drives cost around $10-$20 per gigabyte, and they are relatively small (64GB). So, there seems to be an opportunity to avoid the HUGE costs of scaling databases the traditional way by simply building a big enough RAID 5 array of SSD drives (which would cost only a few thousand dollars). Then we don't care if the database file is fragmented, and we can afford 100 times more disk writes per second without having to spread the database across 100 spindles. . Is anybody else interested in this? I've been testing a few SSD drives and can share my results. If anybody on this site has already solved their I/O bottleneck with SSDs, I would love to hear your war stories! PS. I know that there are plenty of expensive solutions out there that help with scalability, for example the time proven RAM-based SANs. I want to be clear that even $50K is too expensive for my project. I have to find a solution that costs no more than $10K and does not take much time to implement.

  Read the article

• Using URL rewrite module for http to https redirect

  - by johnnyb10

  Following ruslany's suggestion on the URL Rewrite Tips page here, I'm trying to use URL Rewrite to redirect http:// requests for my site to https://. I've written and tested the rule using a test site I set up, and so now the final piece is to create a second site (http) to redirect to my https site. (I need to use a second site because I don't want to uncheck the "Require SSL encryption" checkbox on my existing site.) I'm an IIS newbie so my question is: how do I do this? Should I create a site with the same name and host header, only it will be bound to http? Will IIS let me create a site with the same name? I don't want to screw anything up with my existing site (which is a SharePoint site, currently used by external users). That site currently has http and https bound to it. So my assumption is that, using ISS (not SharePoint), I will create a new site (http only) with the same name and host header as my existing site, and add the URL Rewrite rule to the http site. And then I guess I should remove the http binding from my existing site? Does that seem correct? Any advice, gotchas, etc., would be appreciated. Thanks.

  Read the article

< Previous Page | 116 117 118 119 120 121 122 123 124 125 126 127  | Next Page >