Search Results

Search found 46178 results on 1848 pages for 'java home'.

Page 1216/1848 | < Previous Page | 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223  | Next Page >

  • Most effective way to do daily standup meeting when a few people are remote

    - by Burhan Ali
    I am a software developer in a small team of seven. We are not an Agile (with a big 'A') team but are experimenting with some aspects of agile. One of these is the daily "standup" meeting. The difficulty here is that for two days of the week we have at least one person working from home so the full team isn't available in the same room. What is the best way to carry out a daily standup in this situation? Some facts that may be relevant: We all work in a single open plan room. We use Skype in our company. We don't have any video conferencing capability. We all work the same hours so there are no timezone complexities involved. The development manager is one of the people who works from home one day a week. Things we have tried: Conference call using Skype: This is tricky for those in the office because you can hear people speak in the room and then a split second later through the headset. This can e very distracting. Conference phone: Awful experience. Hard to get them to work and poor quality audio. Text-based updates using Skype. This is not as engaging and is no different than just firing off a status email in the morning. I have seen other questions about remote collaboration but they are mainly about completely remote teams and/or teams that span multiple time zones. We are not affected by either of these problems. What can we do to make our standup meetings better in these circumstances?

    Read the article

  • Open Source Software Development Center at University of Belgrade

    - by Tori Wieldt
    A new Open Source Software Development Center is open at University of Belgrade, Serbia. It centers around using Java & NetBeans as open source projects to learn from and contribute to. Assistant Professor Zoran Sevarac says that not only does the center allow him to teach software development using open source projects, but also "we are improving our University courses based on the experience we get from working on open source code."  Some of the projects underway are a NetBeans UML plugin; Neuroph (a Java neural network framework, with a NetBeans Platform-based UI); a NetBeans DOAP Plugin; WorkieTalkie (NetBeans chat plugin); and 2D and 3D visualization plugins for NetBeans. University of Belgrade also has an official university course about open source development, where students learn to use development tools, work in teams, participate in open source projects and learn from real world software development projects. Students, teachers, and researchers at the University of Belgrade, and any member of the open source community are welcome to come to learn software development from successful open source projects. For more information, you can contact Zoran Sevarac (@neuroph on Twitter).

    Read the article

  • Ubuntu: One or more of the mounts listed in fstab cannot ye be mounted

    - by Phuong Nguyen
    I was enjoying a Movie when my Ubuntu suddenly hung. At the next reboot, here is the message: One or more of the mounts listed in /etc/fstab cannot yet be mounted: /home: waiting for /dev/disk/by-uuid/.... Press ESC to enter a recovery shell. Problems: When I enter recovery shell, I don't know that to do. If I press Ctrl+D, then the message above will reappear. What should I do? I checked with Ubuntu Live CD and my partition looks OK. I have 2 separate partitions for / and /home

    Read the article

  • Difficulty Mounting Volumes on a Partitioned External HD

    - by Todd
    I'm having a great deal of difficulty with an external hard drive. I'm currently running a dual boot system (XP Service Pack 3 and Ubuntu 11.04 Natty Narwahl) on a Dell Inspiron B120. I'm trying to set up a new 80 GB Hitachi external HD. Using GParted, I formatted the drive and set up the partitions. The partitioning scheme is as follows 10GB NTFS Primary, 2GB Linux-Swap Primary, 50GB FAT32 Primary, 12GB Unallocated. After applying those changes, I went into Disk Utility and the HD appears along with the correct partitions. When I try to mount the volumes for partitions 1 and 3, I get a pop-up stating: Error Mounting Volume An error occurred while performing an operation on "Home" (Partition 3 of HTS548080m9AT00): The daemon is being inhibited. When I try to to check the filesystem I get a pop-up stating: Error Checking filesystem on volume An error occurred while performing an operation on "Home" (Partition 3 of HTS548080m9AT00): The daemon is being inhibited. Throughout the time that I'm attempting to troubleshoot the problem, the external drive light is on and blinking. With my frustration hitting a boiling point, I try to shut down the drive and remove it so that I can plug in a different external HD that works PERFECTLY. However, when I try to shut down and safely remove the drive, I get a pop-up stating: Error Detaching Drive An error occurred while performing an operation on "80GB Hard Disk" (HTS548080m9AT00): The daemon is being inhibited. Can anyone tell me what I'm doing wrong? I'm a newbie and not that skilled with terminal commands, so please dumb it down for me if you request specific command output.

    Read the article

  • rsync - How to exclude one .htaccess but not all of them

    - by Cory Gagliardi
    I have an rsync command for copying my files from dev to production. I don't want to copy the .htaccess file that's in the root of the HTML directory but, I do want to copy the few .htaccess files that are in its sub directories. I'm using the argument --exclude .htaccess which is stopping all of the files from getting copied. The other arguments I'm including are -a --recursive --times --perms. Is it possible to configure rsync to do this? Edit: Here is my full command: rsync -a --recursive --times --perms \ --exclude prop_images --exclude tracking --exclude vtours \ --exclude .htaccess --exclude .htaccess_backup --exclude "*~" \ /home/user/dev_html/* /home/user/public_html/

    Read the article

  • Eclipse and Oracle Fusion Development - Free Virtual Event, July 10th

    - by Carlos Chang
      Below is one of many sessions covering Oracle Fusion Development.  It's a free virtual event on July 10. Live chats with Oracle's technical staff.  Check it out! Oracle Enterprise Pack for Eclipse - ADF Development Oracle ADF Development has never been easier in Eclipse. During this session we will explore best practices to use standard Java EE technologies like EJBs and JPA to build rich ADF applications based on ADF Data Controls, Task Flows, and ADF Faces components all within Oracle Enterprise Pack for Eclipse (OEPE) 12c. We will also look at how OEPE’s AppXRay technology enables developers to understand and visualize dependency relationships between ADF components, xml descriptors, and Java objects in order to drive validation, content assist, and refactoring. Free Virtual Developer Day - Fusion Middleware Development Join a free online developer day where you can learn about the various components that make up the Oracle Fusion Development platform including ADF, ADF Mobile, Oracle WebCenter Portal, Business Intelligence and more. Online seminars and hands-on labs available directly from your browser. Join us on July 10!  Register here. 

    Read the article

  • Oracle Launches Mobile Applications User Experience Design Patterns

    - by ultan o'broin
    OK, you heard Joe Huang (@JoeHuang_Oracle) Product Manager for Oracle Application Development Framework (ADF) Mobile. If you're an ADF developer, or a Java (yeah, Java in iOS) developer, well now you're a mobile developer as well. And, using the newly launched Applications User Experience (UX) team's Mobile UX Design Patterns, you're a UX developer rockstar too, offering users so much more than just cool functionality. Mobile Design Pattern for Inline Actions Mobile design requires a different way of thinking. Use Oracle’s mobile design patterns to design iPhone, Android, or browser-based smartphone apps. Oracle's sharing these cutting edge mobile design patterns and their baked-in, scientifically proven usability to enable Oracle customers and partners to build mobile apps quickly. The design patterns are common solutions that developers can easily apply across all application suites. Crafted by the UX team's insight into Oracle Fusion Middleware, the patterns are designed to work with the mobile technology provided by the Oracle Application Development Framework. Other great UX-related information on using ADF Mobile to design task flows and the development experience on offer are on the ADF EMG podcast series. Check out FXAer Brian 'Bex' Huff (@bex of Bezzotech talking about ADF Mobile in podcast number 6 and also number 8 which has great tips about getting going with Android and iOS mobile app development too.

    Read the article

  • How to organize a larger project with several sub-projects and their dependencies?

    - by RoToRa
    As a software developer until now, I've mostly worked on projects that were quite "monolithic" with hardly any dependencies on other projects, without building automation (no Make, Ant, Maven, etc.) and kept on a simple version control system (mostly Subversion) with just a few easily managed version branches. Now together with some friends I'm planning a project that is intended to run on multiple platforms (mostly mobile: Android, iOS, Kindle, Windows, etc.), thus written in several languages and on different development platforms. This will lead to many dependencies: All projects sharing the same resources (e.g. images) or projects dependent on each other (e.g. a core Java library project used by the Android and other Java based implementations). So what I need is some basic information on how to answer questions such as: How would the VCS be structured? Would a client-base or a decentralized VCS be better? How to decide building automation system(s) to use? Since this quite an open question I guess for now it would be great if you could point me to any books or web resources that you can recommend for this topic.

    Read the article

  • Windows 7 Default Gateway problem

    - by Matt
    I have a strange problem (or at least seems strange to me) the below are IP configurations for two laptops on my home network which consists of a main router 192.168.11.1 and a connected wireless router (i know this can cause problems but has always worked until I got the win7 machine) at 192.168.11.2 with DHCP disabled. Laptop 1 - Win XP IP: Dynamically assigned by main router default gateway: 192.168.11.1 (main router) This machine gets perfect connectivity. Laptop 2 - Win7 IP: dynamically assigned by main router Default Gateway: 192.168.11.2 THIS IS THE PROBLEM... I cannot seem to get this machine to default to the main router for the gateway UNLESS I go to a static configuration which I would rather not do since I regularly go between my home and public networks. Why is my Win7 machine not finding the main gateway the same way that the other laptop is? I believe that the rest of my setup is fine as it has always worked and it works perfectly when set as static ip and gateway. Please help! Thanks

    Read the article

  • Unable to connect to network

    - by user33750
    Hey guys, I have a question. I have been having problems connecting a new netbook to my network at home. I have an Asus Eeepc 100HAB. I have tried to run a repair on the connection, uninstalled and re-installed the network card, made sure all of the drivers are up-to-date as well. Two caveats: I have a laptop that I recently switched to a wired connection because it wasn't connecting to the network as well, and the netbook connects to an unsecured network i found just fine, only having a problem getting into my home network. Passwords are correct, and the computer where the connection originates from is working fine as well. Any ideas?

    Read the article

  • Vacation sends autoreply message to the recipient as well

    - by elitalon
    Hi, I have configured my Postfix server with vacation for a domain. Sending a message to [email protected] causes two events: The message is delivered to the recipient ([email protected]) An auto-reply message is sent to the sender, alerting that [email protected] should be used instead. Everything works well except for one particular drawback: the auto-reply is also sent to the recipient, so it receives two messages in the end. What can I do to avoid that? I'm only using the $TO variable in the custom vacation.msg message. And here is Postfix's master.cf vacation line: autoreply unix - n n - - pipe flags=Rhu user=vacation argv=/usr/bin/vacation -j -m /home/vacation/.vacation.msg -f /home/vacation/.vacation.db vacation I know using the -j is a little bit risky according to man page, but I'm kind of testing here.

    Read the article

  • How to setup an iTunes library to use between two Macs?

    - by stead1984
    As you can tell this is no where near work related. I have an iMac G5 where my itunes is currently hosted, I have also just got a new MacBook Pro. What I want to be able to do is sync my itunes library from my iMac to my MacBook Pro, that way it can be accessible away from my home network, then if I make any changes to the itunes library (like change a track name) it will sync these changes back once I connect back to the home network. My current itunes contains music, videos, podcasts, playlists and iPhone apps, I would also like iTunes to track play counts collectively between the iMac and the MacBook Pro.

    Read the article

  • GNOME session not starting after filesystem corruption

    - by user3215
    I'm running Ubuntu 9.10 desktop edition. Suddenly today /home became corrupted and I was prompted to run fsck manually. I ran fsck -y /home and rebooted the system. The system booted but I got no GUI interface (GNOME session) but a black screen with a user prompt instead. Any tricks here to start my system normally? Any help is greatly appreciated. EDIT:1 The error were similar to the the following(may be with some mistakes as I had to type it manually): machine1 login: root password: at login Sun Jan 16 15:30:46 IST 2011 on tty1 EXT3-fs error (devie sda1): ext3_lookup :deleted inode referenced aborting journal on device sda1 Remounting filesystem read-only root@machine1:~# startx ktemp: failed to create file via template `/tmp/serverauth.xxxxxxxxxxx: Read-only file /usr/bin/startx: line 157: cannot create temp file for here-document: Read-only file xauth: error in locking authority file /root/.Xauthority /usr/bin/startx: line 173: cannnot create temp file for here-document: Read-only file xauth: error in locking authority file /root/.Xauthority /usr/bin/startx: line 173: cannnot create temp file for here-document: Read-only file X: cannot stat /tmp/.x11-unix (No such file or directory), aborting giving up. xinit: No such file or directory (errno 2): unable to connect to xserver xinit: No such process (errno 3): Server error xauth: error in locking authority file /root/.Xauthority

    Read the article

  • Encrypt SSD or not?

    - by JamesBradbury
    My desktop machine is running Ubuntu 12.04 (and will probably stay with it until the next LTS). I've got a new 120GB SSD on the way as my existing 420GB spinning disk. If it makes any difference I'll be dual-booting with Windows 7 across both disks too. I've read some helpful answers here about /home setup and enabling TRIM, which I intend to follow. So most of my /home will be on the SSD, with only photos, videos and music on the spinning disk. The question is, when I reinstall Ubuntu from CD or USB, whether I should encrypt the SSD? Specifically: I'm reading that drive wear isn't much of an issue with modern SSDs as they last decades even if you spam them. Is this true? How big a performance reduction will encrypting cause (I have an i7 Sandybridge, so I guess it can cope)? Is it more important from a security point of view to encrypt an SSD? I think I read somewhere that it may be hard to reliably wipe data. By all means answer even if you only know about one of those things.

    Read the article

  • Prevent Windows 7 from installing a "critical" updates that crashes the system

    - by Sylverdrag
    I am running Windows 7 home premium. Up until yesterday, everything was going just beautifully, until I received a "critical update". As soon as the critical update was installed, the system became extremely unstable and froze up every few minutes requiring me to restart the system several times, with the same results. I used system restore to roll back the * update, and everything went back to normal... except that I keep getting a message telling me to restart the computer so that it can install this "critical update". There is no "don't install that crap on my machine" option. Disabling the updates doesn't change anything, turning off the windows update service doesn't change anything either, and being on Home premium, I have no access to the group policies. Any ideas of what can be done to prevent Windows from installing this update the next time I reboot?

    Read the article

  • GPO: Disable WiFi when computer is connected to LAN with wire

    - by r0ca
    Hi all! Is anyone of you know how to disable, thru a GPO, the Wireless connection as soon as the computer is connected to the LAN with a wire. By example, a user is at home with his laptop, connected to his home wifi connection. He leaves and comes to the office but the Wifi is still enabled. He plugs the ethernet cable in the computer and then, both wifi and wire connection are enable. I would like to apply a GPO that does this... Thanks a bunch!

    Read the article

  • OpenJDK6 At a Glance

    - by user9158633
    OpenJDK6 Quick Links Project:       Home Page  |  How to Contribute to OpenJdk |  Java SE 6 Spec Code:          Source Bundle Download  |  Mercurial Repositories: [.] , corba, hotspot, jaxp, jaxws, jdk, langtools Mailing List: jdk6-dev@openjdk.java.net  |  Mail Archive  |  How to Subscribe Bloggers:     Joe Darcy (the founder and the first Release Manager)  |   Kelly O'Hair (current Release Manager) Blog Posts:  All Joe's OpenJDK 6 Posts  | Joe's FOSDEM Presentation Related Projects: IcedTea6  | OpenJDK 7 Important Notice: • Security fixes from Oracle will continue  through EOL of OpenJDK 6 train • EOL of OpenJDK 6 train will occur no sooner than July 2012 (one year after JDK 7 ships) OpenJDK 6 Releases Releases:  Release Process  |  Release Tools/Scripts Build Numbers  Release Engineer  Release Notes  Test Results  Change List  B01 - B22 Joe Darcy B22 Blog, src bundles B22 B22  B23 Kelly O'Hair B23 Blog, src bundles B23 B23  B24, and later Lana Steuck B24 Blog, src bundles B24 B24

    Read the article

  • Set global handling for PHP scripts in NGINX + PHP-FPM

    - by Radio
    I have to define fastcgi_pass for every virtual host. How do I define it global-wise? server { listen 80; server_name www.domain.tld; location / { root /home/user/www.domain.tld; index index.html index.php; } location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /home/user/domain.tld$fastcgi_script_name; include fastcgi_params; } }

    Read the article

  • Where to put business logic in MVC design?

    - by BriskLabs Pakistan
    I have created a simple MVC java application that adds records through data forms to a database. my app collects data, it also validates it and stores it. This is because the data is being sourced online from different users. the data is mostly numeric in nature. now on the numeric data being stored into database (SQL server) , i wish that my app should be able to perform computations... and display it. the user is not interested in how computations are done so they must be encapsulated. the user must only be able to view the simple computed data which for example A column data - B Column data / C column data etc... and just display it to the user... i know how to write stored procedures for same but i want a 3 tier app I want the data, that I put into the database as a record, worked upon by performing calculations on it. However, the original data should remain unaffected, while the new data, post-calculations, must be stored as a new entity record into the database. Where should I write the code for this background calculation? As it is the rules and business logic... in a new java beans files ?

    Read the article

  • Configure ubuntu 12.10 to share internet through second NIC with subnetwork

    - by Dan Smith
    I have an Ubuntu 12.10 box with 2 NICs. eth0 is connected to my 192.168.1.X network, which is connected to my home router and out to the internet. I want the other interface, eth1,to support 10.0.0.x and allow devices on that network to access the internet through my ubuntu box. I do not need dhcp on the 10.0.0.x network. Here's a schematic: Internet --- home router ---- ubuntu[eth0:192.168.1.x, eth1:10.0.0.x] --- [10.0.0.x device] How do I configure the ubuntu box to share the internet with devices on that subnetwork? Thanks!

    Read the article

  • How to install Ubuntu 12.04.1 in EFI mode with Encrypted LVM?

    - by g0lem
    I'm trying to properly install Ubuntu 12.04.1 LTS 64-bit PC (AMD64) with the alternate install CD ".iso" on a lenovo Thinkpad X220. Default Hard Disk (with a pre-installed version of Windows 7) has been replaced with a brand new SSD. The UEFI BIOS of the lenovo Thinkpad X220 is set to "UEFI Boot only" & "USB UEFI BIOS Support" is enabled (I'm using an external USB DVD reader to perform Ubuntu installation). The BIOS is a Phoenix SecureCore Tiano, BIOS version is 8DET56WW (1.26). The attempts below are made with the UEFI BIOS settings described above. Here's what I've tried so far: Boot on a live GParted CD Create a GPT partition table Create a FAT32 partition for UEFI System, set the partition to "EF00" type ("boot" flag) Leave remaining space unformated Boot on Ubuntu 12.04.1 LTS 64-bit PC (AMD64) with alternate CD: Perform the install with network updates enabled Use manual partitioning FAT32 partition created with GParted is used as "EFI System partition" Remaining space is set to be used as "Physical volume for LVM" Then "Configure encrypted volumes" using the previous "Physical volume for LVM" as the encrypted container, passphrase is setup. "Configure the Logical Volume Manager" creating a volume Group using the encrypted container /dev/mapper/sda2_crypt Creation of the Logical Volumes "Create logical volume", choosing the previously created volume Group Assign a mount point and file system to the Logical volumes : LV-root for / LV-var for /var LV-usr for /usr LV-usr-local for /usr/local LV-swap for swap LV-home for /home NOTE: /tmp would be in RAM only using TMPFS Bootloader step: neither my ESP partition (/dev/sda1, /dev/sda or MBR) seems to be the right place for GRUB, I get the following message (X suffix is for demonstration only): unable to install grub in /dev/sdaX Executing 'grub-install /dev/sdaX' failed This is a fatal error. Finish installation without the Bootloader & Reboot The system doesn't start, there's no EFI/GRUB menu at startup. What are the steps to perform a clean and working installation of Ubuntu 12.04.1 Precise Pangolin, 64bit version in U(EFI) mode using the encrypted LUKS + LVM scheme described above?

    Read the article

  • Launcher icons are invisible after upgrade from 11.10 to 12.04

    - by Clo Knibbe
    I am re-purposing an old laptop. I installed 11.10 on it and then immediately upgraded to 12.04. (I could not directly install 12.04 as my system does not support PAE.) When my system was (briefly) 11.10, the desktop appeared as expected. However, after the upgrade to 12.04, the icons in the launcher area are invisible. If I hover over the spot where the icon should be the little popup window showing the tool's name appears, and I can click to invoke the tool. I just cannot see the icons. ![invisible icons in launcher][1] The icons do appear as expected in other contexts, for example in the Home folder and in Dash Home. My theme is "Ambiance (default)" I do not have a ~/.icons folder. This is the top level contents of /usr/share/icons: default DMZ-Black DMZ-White gnome handhelds hicolor HighContrast HighContrastInverse Humanity Humanity-Dark locolor LoginIcons LowContrast redglass ubuntu-mono-dark ubuntu-mono-light unity-icon-theme whiteglass (Sorry for the poor formatting, can't get it to show in list.) I suspect that the launcher isn't looking for the icons in the right place, but I don't know how to confirm that, or how to correct. This is my first foray into Linux, although I used to use Unix a few decades ago. This doesn't look much like my old Sun workstation, though! Does anyone have any suggestions or insights for me? Thanks.

    Read the article

  • accessing live usb files from new hd ubuntu install

    - by Robin Bailey
    After my live USB (ubuntu 12.04 lts) refused to boot, I proceeded to install the same Ubuntu version on the laptop hard drive (a dual boot next to Win xp). This all went well without a hitch. Previous to this, I spent several weeks enjoying and exploring ubuntu from the usb pendrive. During this time I changed lots of settings and customized Firefox and more. Now, I'd like to import the home folder from the usb drive into the new install home folder on the hard disk, which is the purported folder that holds all those special settings to my knowledge. Unfortunately and only being familiar with Windows file systems, the view of the usb file system from the new hdd install is totally perplexing. I can't find anything that looks anywhere close to the original file system. More, I can't find any of the files I had created and stored there, like the LibreOfficeCalc file that has all my passwords (this one is really discouraging) that was stored on the ubuntu desktop. Help me find this file alone and I'll bow down with full apologies to any and all computer gods. Being able to import all those customizing settings into the new install would be a major bonus also, but hey, I'm not greedy. I'll take the passwords file and be happy! And humble! I would be very grateful for some clear, understandable help on this. Thanks

    Read the article

  • User accounts in FTP

    - by Brad
    I have an FTP server(proftpd on debian) that I'm going to allow a couple friends access to, and I want some safety nets in place, just in case. These are some of the things I'd like to do: Jail the accounts to their home directories and impose a cap on the amount of data they can upload Allow them access to a shared folder(via symlink or something) where they have full access(Also with a storage cap, but larger) Allow my own account full access to the system(Using groups I guess) Not allow anonymous access, or allow it with its own folder, separate from the shared user folder Currently, I've got the accounts set up and jailed, but it seems like the symlink that I put in is not allowing them to visit the shared folder. I suppose this has to do with them not having read permissions anywhere but their own home directories, or maybe it's something else, I'll continue to look into it and provide any information that is requested. Is what I'm trying to do possible? Any tips or resources that you can share are appreciated. Thanks.

    Read the article

  • Suspected network performance issue on VirtualBox Ubuntu guest on Win7 host

    - by Adam
    I set up Ubuntu 12.04 in VirtualBox on the Win7 machine I was allocated on my new project. I am running Java, Eclipse, Tomcat to develop a large data-intensive application and I noticed that this application runs at half the speed of my colleague's identical machine, where he runs it all under Windows. I think I have narrowed down the performance issue to the network, after comparing and equalising all the Java VM settings with my colleague. Is there a ping test I can do or some other network diagnostic test to flag up any problems? To give some background, the network performance is confusing. Running a network speed test to my colleague's machine with iperf shows speeds of 6 Mb/s from my Ubuntu guest, and 90 Mb/s from the win7 host. Large downloads, e.g. the Java SDK, come down at about 1.2 MB/s on both the guest and the host. Pings are sub-1ms on the host, but 1.5ms on the guest. I also did a broadband speed test, and got 10Mb/s download speed on both, but the host has an upload speed of 10Mb/s but the guest only uploads at 3Mb/s. I've been trying to diagnose any MTU problems with ping -M do to identify any kind of packet fragmentation problem but it's progressing very slow because I don't have much experience in this area. From what I read on other people's networking issues with VB and Linux guests on Win7 hosts, I should be able to get the speed on the guest up to the same level as the host. I installed a fresh VM with Ubuntu again to see if I'd foobar'd it somehow, but I'm getting the same readings with iperf on the virgin installation. My setup is: Adapter 1: Intel PRO/1000 MT Desktop (NAT) Adapter 2: ditto (host-only adapter) eth0 Link encap:Ethernet HWaddr 08:00:27:0b:76:bf inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fe0b:76bf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:86236 errors:0 dropped:0 overruns:0 frame:0 TX packets:49369 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:69163946 (69.1 MB) TX bytes:3530535 (3.5 MB) eth2 Link encap:Ethernet HWaddr 08:00:27:a3:26:b8 inet addr:192.168.56.101 Bcast:192.168.56.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fea3:26b8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:59 errors:0 dropped:0 overruns:0 frame:0 TX packets:57 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:9148 (9.1 KB) TX bytes:7648 (7.6 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:701 errors:0 dropped:0 overruns:0 frame:0 TX packets:701 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:66321 (66.3 KB) TX bytes:66321 (66.3 KB)

    Read the article

< Previous Page | 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223  | Next Page >