Search Results

Search found 41582 results on 1664 pages for 'fault tolerance'.

Page 125/1664 | < Previous Page | 121 122 123 124 125 126 127 128 129 130 131 132  | Next Page >

  • Nginx and client certificates from hierarchical OpenSSL-based certification authorities

    - by Fmy Oen
    I'm trying to set up root certification authority, subordinate certification authority and to generate the client certificates signed by any of this CA that nginx 0.7.67 on Debian Squeeze will accept. My problem is that root CA signed client certificate works fine while subordinate CA signed one results in "400 Bad Request. The SSL certificate error". Step 1: nginx virtual host configuration: server { server_name test.local; access_log /var/log/nginx/test.access.log; listen 443 default ssl; keepalive_timeout 70; ssl_protocols SSLv3 TLSv1; ssl_ciphers AES128-SHA:AES256-SHA:RC4-SHA:DES-CBC3-SHA:RC4-MD5; ssl_certificate /etc/nginx/ssl/server.crt; ssl_certificate_key /etc/nginx/ssl/server.key; ssl_client_certificate /etc/nginx/ssl/client.pem; ssl_verify_client on; ssl_session_cache shared:SSL:10m; ssl_session_timeout 5m; location / { proxy_pass http://testsite.local/; } } Step 2: PKI infrastructure organization for both root and subordinate CA (based on this article): # mkdir ~/pki && cd ~/pki # mkdir rootCA subCA # cp -v /etc/ssl/openssl.cnf rootCA/ # cd rootCA/ # mkdir certs private crl newcerts; touch serial; echo 01 > serial; touch index.txt; touch crlnumber; echo 01 > crlnumber # cp -Rvp * ../subCA/ Almost no changes was made to rootCA/openssl.cnf: [ CA_default ] dir = . # Where everything is kept ... certificate = $dir/certs/rootca.crt # The CA certificate ... private_key = $dir/private/rootca.key # The private key and to subCA/openssl.cnf: [ CA_default ] dir = . # Where everything is kept ... certificate = $dir/certs/subca.crt # The CA certificate ... private_key = $dir/private/subca.key # The private key Step 3: Self-signed root CA certificate generation: # openssl genrsa -out ./private/rootca.key -des3 2048 # openssl req -x509 -new -key ./private/rootca.key -out certs/rootca.crt -config openssl.cnf Enter pass phrase for ./private/rootca.key: You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank For some fields there will be a default value, If you enter '.', the field will be left blank. ----- Country Name (2 letter code) [AU]: State or Province Name (full name) [Some-State]: Locality Name (eg, city) []: Organization Name (eg, company) [Internet Widgits Pty Ltd]: Organizational Unit Name (eg, section) []: Common Name (eg, YOUR name) []:rootca Email Address []: Step 4: Subordinate CA certificate generation: # cd ../subCA # openssl genrsa -out ./private/subca.key -des3 2048 # openssl req -new -key ./private/subca.key -out subca.csr -config openssl.cnf Enter pass phrase for ./private/subca.key: You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank For some fields there will be a default value, If you enter '.', the field will be left blank. ----- Country Name (2 letter code) [AU]: State or Province Name (full name) [Some-State]: Locality Name (eg, city) []: Organization Name (eg, company) [Internet Widgits Pty Ltd]: Organizational Unit Name (eg, section) []: Common Name (eg, YOUR name) []:subca Email Address []: Please enter the following 'extra' attributes to be sent with your certificate request A challenge password []: An optional company name []: Step 5: Subordinate CA certificate signing by root CA certificate: # cd ../rootCA/ # openssl ca -in ../subCA/subca.csr -extensions v3_ca -config openssl.cnf Using configuration from openssl.cnf Enter pass phrase for ./private/rootca.key: Check that the request matches the signature Signature ok Certificate Details: Serial Number: 1 (0x1) Validity Not Before: Feb 4 10:49:43 2013 GMT Not After : Feb 4 10:49:43 2014 GMT Subject: countryName = AU stateOrProvinceName = Some-State organizationName = Internet Widgits Pty Ltd commonName = subca X509v3 extensions: X509v3 Subject Key Identifier: C9:E2:AC:31:53:81:86:3F:CD:F8:3D:47:10:FC:E5:8E:C2:DA:A9:20 X509v3 Authority Key Identifier: keyid:E9:50:E6:BF:57:03:EA:6E:8F:21:23:86:BB:44:3D:9F:8F:4A:8B:F2 DirName:/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca serial:9F:FB:56:66:8D:D3:8F:11 X509v3 Basic Constraints: CA:TRUE Certificate is to be certified until Feb 4 10:49:43 2014 GMT (365 days) Sign the certificate? [y/n]:y 1 out of 1 certificate requests certified, commit? [y/n]y ... # cd ../subCA/ # cp -v ../rootCA/newcerts/01.pem certs/subca.crt Step 6: Server certificate generation and signing by root CA (for nginx virtual host): # cd ../rootCA # openssl genrsa -out ./private/server.key -des3 2048 # openssl req -new -key ./private/server.key -out server.csr -config openssl.cnf Enter pass phrase for ./private/server.key: You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank For some fields there will be a default value, If you enter '.', the field will be left blank. ----- Country Name (2 letter code) [AU]: State or Province Name (full name) [Some-State]: Locality Name (eg, city) []: Organization Name (eg, company) [Internet Widgits Pty Ltd]: Organizational Unit Name (eg, section) []: Common Name (eg, YOUR name) []:test.local Email Address []: Please enter the following 'extra' attributes to be sent with your certificate request A challenge password []: An optional company name []: # openssl ca -in server.csr -out certs/server.crt -config openssl.cnf Step 7: Client #1 certificate generation and signing by root CA: # openssl genrsa -out ./private/client1.key -des3 2048 # openssl req -new -key ./private/client1.key -out client1.csr -config openssl.cnf Enter pass phrase for ./private/client1.key: You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank For some fields there will be a default value, If you enter '.', the field will be left blank. ----- Country Name (2 letter code) [AU]: State or Province Name (full name) [Some-State]: Locality Name (eg, city) []: Organization Name (eg, company) [Internet Widgits Pty Ltd]: Organizational Unit Name (eg, section) []: Common Name (eg, YOUR name) []:Client #1 Email Address []: Please enter the following 'extra' attributes to be sent with your certificate request A challenge password []: An optional company name []: # openssl ca -in client1.csr -out certs/client1.crt -config openssl.cnf Step 8: Client #1 certificate converting to PKCS12 format: # openssl pkcs12 -export -out certs/client1.p12 -inkey private/client1.key -in certs/client1.crt -certfile certs/rootca.crt Step 9: Client #2 certificate generation and signing by subordinate CA: # cd ../subCA/ # openssl genrsa -out ./private/client2.key -des3 2048 # openssl req -new -key ./private/client2.key -out client2.csr -config openssl.cnf Enter pass phrase for ./private/client2.key: You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank For some fields there will be a default value, If you enter '.', the field will be left blank. ----- Country Name (2 letter code) [AU]: State or Province Name (full name) [Some-State]: Locality Name (eg, city) []: Organization Name (eg, company) [Internet Widgits Pty Ltd]: Organizational Unit Name (eg, section) []: Common Name (eg, YOUR name) []:Client #2 Email Address []: Please enter the following 'extra' attributes to be sent with your certificate request A challenge password []: An optional company name []: # openssl ca -in client2.csr -out certs/client2.crt -config openssl.cnf Step 10: Client #2 certificate converting to PKCS12 format: # openssl pkcs12 -export -out certs/client2.p12 -inkey private/client2.key -in certs/client2.crt -certfile certs/subca.crt Step 11: Passing server certificate and private key to nginx (performed with OS superuser privileges): # cd ../rootCA/ # cp -v certs/server.crt /etc/nginx/ssl/ # cp -v private/server.key /etc/nginx/ssl/ Step 12: Passing root and subordinate CA certificates to nginx (performed with OS superuser privileges): # cat certs/rootca.crt > /etc/nginx/ssl/client.pem # cat ../subCA/certs/subca.crt >> /etc/nginx/ssl/client.pem client.pem file look like this: # cat /etc/nginx/ssl/client.pem -----BEGIN CERTIFICATE----- MIID6TCCAtGgAwIBAgIJAJ/7VmaN048RMA0GCSqGSIb3DQEBBQUAMFYxCzAJBgNV BAYTAkFVMRMwEQYDVQQIEwpTb21lLVN0YXRlMSEwHwYDVQQKExhJbnRlcm5ldCBX aWRnaXRzIFB0eSBMdGQxDzANBgNVBAMTBnJvb3RjYTAeFw0xMzAyMDQxMDM1NTda ... -----END CERTIFICATE----- Certificate: Data: Version: 3 (0x2) Serial Number: 1 (0x1) ... -----BEGIN CERTIFICATE----- MIID4DCCAsigAwIBAgIBATANBgkqhkiG9w0BAQUFADBWMQswCQYDVQQGEwJBVTET MBEGA1UECBMKU29tZS1TdGF0ZTEhMB8GA1UEChMYSW50ZXJuZXQgV2lkZ2l0cyBQ dHkgTHRkMQ8wDQYDVQQDEwZyb290Y2EwHhcNMTMwMjA0MTA0OTQzWhcNMTQwMjA0 ... -----END CERTIFICATE----- It looks like everything is working fine: # service nginx reload # Reloading nginx configuration: Enter PEM pass phrase: # nginx. # Step 13: Installing *.p12 certificates in browser (Firefox in my case) gives the problem I've mentioned above. Client #1 = 200 OK, Client #2 = 400 Bad request/The SSL certificate error. Any ideas what should I do? Update 1: Results of SSL connection test attempts: # openssl s_client -connect test.local:443 -CAfile ~/pki/rootCA/certs/rootca.crt -cert ~/pki/rootCA/certs/client1.crt -key ~/pki/rootCA/private/client1.key -showcerts Enter pass phrase for tmp/testcert/client1.key: CONNECTED(00000003) depth=1 C = AU, ST = Some-State, O = Internet Widgits Pty Ltd, CN = rootca verify return:1 depth=0 C = AU, ST = Some-State, O = Internet Widgits Pty Ltd, CN = test.local verify return:1 --- Certificate chain 0 s:/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=test.local i:/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca -----BEGIN CERTIFICATE----- MIIDpjCCAo6gAwIBAgIBAjANBgkqhkiG9w0BAQUFADBWMQswCQYDVQQGEwJBVTET MBEGA1UECBMKU29tZS1TdGF0ZTEhMB8GA1UEChMYSW50ZXJuZXQgV2lkZ2l0cyBQ dHkgTHRkMQ8wDQYDVQQDEwZyb290Y2EwHhcNMTMwMjA0MTEwNjAzWhcNMTQwMjA0 ... -----END CERTIFICATE----- 1 s:/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca i:/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca -----BEGIN CERTIFICATE----- MIID6TCCAtGgAwIBAgIJAJ/7VmaN048RMA0GCSqGSIb3DQEBBQUAMFYxCzAJBgNV BAYTAkFVMRMwEQYDVQQIEwpTb21lLVN0YXRlMSEwHwYDVQQKExhJbnRlcm5ldCBX aWRnaXRzIFB0eSBMdGQxDzANBgNVBAMTBnJvb3RjYTAeFw0xMzAyMDQxMDM1NTda ... -----END CERTIFICATE----- --- Server certificate subject=/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=test.local issuer=/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca --- Acceptable client certificate CA names /C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca /C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=subca --- SSL handshake has read 3395 bytes and written 2779 bytes --- New, TLSv1/SSLv3, Cipher is AES256-SHA Server public key is 2048 bit Secure Renegotiation IS supported Compression: zlib compression Expansion: zlib compression SSL-Session: Protocol : TLSv1 Cipher : AES256-SHA Session-ID: 15BFC2029691262542FAE95A48078305E76EEE7D586400F8C4F7C516B0F9D967 Session-ID-ctx: Master-Key: 23246CF166E8F3900793F0A2561879E5DB07291F32E99591BA1CF53E6229491FEAE6858BFC9AACAF271D9C3706F139C7 Key-Arg : None PSK identity: None PSK identity hint: None SRP username: None TLS session ticket: 0000 - c2 5e 1d d2 b5 6d 40 23-b2 40 89 e4 35 75 70 07 .^...m@#[email protected]. 0010 - 1b bb 2b e6 e0 b5 ab 10-10 bf 46 6e aa 67 7f 58 ..+.......Fn.g.X 0020 - cf 0e 65 a4 67 5a 15 ba-aa 93 4e dd 3d 6e 73 4c ..e.gZ....N.=nsL 0030 - c5 56 f6 06 24 0f 48 e6-38 36 de f1 b5 31 c5 86 .V..$.H.86...1.. ... 0440 - 4c 53 39 e3 92 84 d2 d0-e5 e2 f5 8a 6a a8 86 b1 LS9.........j... Compression: 1 (zlib compression) Start Time: 1359989684 Timeout : 300 (sec) Verify return code: 0 (ok) --- Everything seems fine with Client #2 and root CA certificate but request returns 400 Bad Request error: # openssl s_client -connect test.local:443 -CAfile ~/pki/rootCA/certs/rootca.crt -cert ~/pki/subCA/certs/client2.crt -key ~/pki/subCA/private/client2.key -showcerts Enter pass phrase for tmp/testcert/client2.key: CONNECTED(00000003) depth=1 C = AU, ST = Some-State, O = Internet Widgits Pty Ltd, CN = rootca verify return:1 depth=0 C = AU, ST = Some-State, O = Internet Widgits Pty Ltd, CN = test.local verify return:1 ... Compression: 1 (zlib compression) Start Time: 1359989989 Timeout : 300 (sec) Verify return code: 0 (ok) --- GET / HTTP/1.0 HTTP/1.1 400 Bad Request Server: nginx/0.7.67 Date: Mon, 04 Feb 2013 15:00:43 GMT Content-Type: text/html Content-Length: 231 Connection: close <html> <head><title>400 The SSL certificate error</title></head> <body bgcolor="white"> <center><h1>400 Bad Request</h1></center> <center>The SSL certificate error</center> <hr><center>nginx/0.7.67</center> </body> </html> closed Verification fails with Client #2 certificate and subordinate CA certificate: # openssl s_client -connect test.local:443 -CAfile ~/pki/subCA/certs/subca.crt -cert ~/pki/subCA/certs/client2.crt -key ~/pki/subCA/private/client2.key -showcerts Enter pass phrase for tmp/testcert/client2.key: CONNECTED(00000003) depth=1 C = AU, ST = Some-State, O = Internet Widgits Pty Ltd, CN = rootca verify error:num=19:self signed certificate in certificate chain verify return:0 ... Compression: 1 (zlib compression) Start Time: 1359990354 Timeout : 300 (sec) Verify return code: 19 (self signed certificate in certificate chain) --- GET / HTTP/1.0 HTTP/1.1 400 Bad Request ... Still getting 400 Bad Request error with concatenated CA certificates and Client #2 (but still everything ok with Client #1): # cat certs/rootca.crt ../subCA/certs/subca.crt > certs/concatenatedca.crt # openssl s_client -connect test.local:443 -CAfile ~/pki/rootCA/certs/concatenatedca.crt -cert ~/pki/subCA/certs/client2.crt -key ~/pki/subCA/private/client2.key -showcerts Enter pass phrase for tmp/testcert/client2.key: CONNECTED(00000003) depth=1 C = AU, ST = Some-State, O = Internet Widgits Pty Ltd, CN = rootca verify return:1 depth=0 C = AU, ST = Some-State, O = Internet Widgits Pty Ltd, CN = test.local verify return:1 --- ... Compression: 1 (zlib compression) Start Time: 1359990772 Timeout : 300 (sec) Verify return code: 0 (ok) --- GET / HTTP/1.0 HTTP/1.1 400 Bad Request ... Update 2: I've managed to recompile nginx with enabled debug. Here is the part of successfull conection by Client #1 track: 2013/02/05 14:08:23 [debug] 38701#0: *119 accept: <MY IP ADDRESS> fd:3 2013/02/05 14:08:23 [debug] 38701#0: *119 event timer add: 3: 60000:2856497512 2013/02/05 14:08:23 [debug] 38701#0: *119 kevent set event: 3: ft:-1 fl:0025 2013/02/05 14:08:23 [debug] 38701#0: *119 malloc: 28805200:660 2013/02/05 14:08:23 [debug] 38701#0: *119 malloc: 28834400:1024 2013/02/05 14:08:23 [debug] 38701#0: *119 posix_memalign: 28860000:4096 @16 2013/02/05 14:08:23 [debug] 38701#0: *119 http check ssl handshake 2013/02/05 14:08:23 [debug] 38701#0: *119 https ssl handshake: 0x16 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL server name: "test.local" 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL_do_handshake: -1 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL_get_error: 2 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL handshake handler: 0 2013/02/05 14:08:23 [debug] 38701#0: *119 verify:1, error:0, depth:1, subject:"/C=AU /ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca",issuer: "/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca" 2013/02/05 14:08:23 [debug] 38701#0: *119 verify:1, error:0, depth:0, subject:"/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=Client #1",issuer: "/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca" 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL_do_handshake: 1 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL: TLSv1, cipher: "AES256-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1" 2013/02/05 14:08:23 [debug] 38701#0: *119 http process request line 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL_read: -1 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL_get_error: 2 2013/02/05 14:08:23 [debug] 38701#0: *119 http process request line 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL_read: 1 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL_read: 524 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL_read: -1 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL_get_error: 2 2013/02/05 14:08:23 [debug] 38701#0: *119 http request line: "GET / HTTP/1.1" And here is the part of unsuccessfull conection by Client #2 track: 2013/02/05 13:51:34 [debug] 38701#0: *112 accept: <MY_IP_ADDRESS> fd:3 2013/02/05 13:51:34 [debug] 38701#0: *112 event timer add: 3: 60000:2855488975 2013/02/05 13:51:34 [debug] 38701#0: *112 kevent set event: 3: ft:-1 fl:0025 2013/02/05 13:51:34 [debug] 38701#0: *112 malloc: 28805200:660 2013/02/05 13:51:34 [debug] 38701#0: *112 malloc: 28834400:1024 2013/02/05 13:51:34 [debug] 38701#0: *112 posix_memalign: 28860000:4096 @16 2013/02/05 13:51:34 [debug] 38701#0: *112 http check ssl handshake 2013/02/05 13:51:34 [debug] 38701#0: *112 https ssl handshake: 0x16 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL server name: "test.local" 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL_do_handshake: -1 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL_get_error: 2 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL handshake handler: 0 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL_do_handshake: -1 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL_get_error: 2 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL handshake handler: 0 2013/02/05 13:51:34 [debug] 38701#0: *112 verify:0, error:20, depth:1, subject:"/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=subca",issuer: "/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca" 2013/02/05 13:51:34 [debug] 38701#0: *112 verify:0, error:27, depth:1, subject:"/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=subca",issuer: "/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca" 2013/02/05 13:51:34 [debug] 38701#0: *112 verify:1, error:27, depth:0, subject:"/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=Client #2",issuer: "/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=subca" 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL_do_handshake: 1 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL: TLSv1, cipher: "AES256-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1" 2013/02/05 13:51:34 [debug] 38701#0: *112 http process request line 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL_read: 1 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL_read: 524 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL_read: -1 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL_get_error: 2 2013/02/05 13:51:34 [debug] 38701#0: *112 http request line: "GET / HTTP/1.1" So I'm getting OpenSSL error #20 and then #27. According to verify documentation: 20 X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT_LOCALLY: unable to get local issuer certificate the issuer certificate could not be found: this occurs if the issuer certificate of an untrusted certificate cannot be found. 27 X509_V_ERR_CERT_UNTRUSTED: certificate not trusted the root CA is not marked as trusted for the specified purpose.

    Read the article

  • Clamav. WARNING: No clamd server appears to be available

    - by Jevgeni Smirnov
    I have clamav.log full of these messages, what might be the problem and how to fix this? I have Debian clamav-0.97.6+dfsg-1~squeeze1 spamassassin-3.3.1-1 dovecot-pop3d-1.2.15-7 postfix-2.7.1-1+squeeze1 and also there is somewhere near milter. LocalSocket setting is ok Tue Jun 4 07:43:34 2013 -> WARNING: No clamd server appears to be available Tue Jun 4 07:44:34 2013 -> WARNING: No clamd server appears to be available Tue Jun 4 07:45:34 2013 -> WARNING: No clamd server appears to be available Tue Jun 4 07:46:34 2013 -> WARNING: No clamd server appears to be available Tue Jun 4 07:47:34 2013 -> WARNING: No clamd server appears to be available Tue Jun 4 07:47:58 2013 -> ERROR: Failed to initiate streaming/fdpassing Tue Jun 4 07:47:58 2013 -> WARNING: No clamd server appears to be available Tue Jun 4 07:48:58 2013 -> WARNING: No clamd server appears to be available Tue Jun 4 07:49:33 2013 -> ERROR: Failed to initiate streaming/fdpassing Tue Jun 4 07:49:33 2013 -> WARNING: No clamd server appears to be available

    Read the article

  • Multiple authoritative DNS server on same IPv4 address

    - by Adrien Clerc
    I'd like to maintain a DNS tunnel on my self-hosted server at example.com. I also have a DNS server on it, which serves everything for example.com. I'm currently using dns2tcp for DNS tunneling, on the domain tunnel.example.com. NSD3 is used for serving authoritative zones, because it is both simple and secure. However, I have only one public IPv4 address, which means that NSD and dns2tcp can't listen on the same IP/port. So I'm currently using PowerDNS Recursor using the forward-zones parameter like this: forward-zones-recurse=tunnel.example.com=1.2.3.4:5354 forward-zones=example.com=1.2.3.4:5353 This enables request for authoritative zone to be asked to the correct server, as well as for tunnel requests. NSD is listening on port 5353 and dns2tcp on port 5354. However, this is bad, because the recursor needs to be open. And it actually answers to any recursive query. Do you have any solution for that? I really prefer a solution that doesn't involve setting up BIND, but if you are in the mood to convince me, don't hesitate to do so ;) EDIT: I change the title to be clearer.

    Read the article

  • Windows Server 2008 Services won't start after patch

    - by Antitribu
    After installing the run of the mill patches today on a Windows Server 2008 (Running as an AD controller and Exchange 2007 Server) the machine came back up with "configuring updates stage 3 of 3 0% complete". The machine had been kept reasonably up to date so this likely was caused by a very recent patch. At the leaste the following patches were installed: KB973037 KB969947 KB973565 Restarting the server into safe mode and then subsequently rebooting (with no changes made) allowed the computer to restart and I can now log in normally. However none of the critical services start; including but not limited to Exchange, DNS and Terminal Services (Obviously if DNS doesn't start other things will break). I am unable to run Internet Explorer but Chrome will work. There are no meaningful errors in the event logs as to why services won't start. Under KDC I have The Key Distribution Center (KDC) cannot find a suitable certificate to use for smart card logons, or the KDC certificate could not be verified. Smart card logon may not function correctly if this problem is not resolved. To correct this problem, either verify the existing KDC certificate using certutil.exe or enroll for a new KDC certificate. This is going to be an evil one to debug and I'm kinda hoping someone has encountered it and knows the answer off hand. Thanks all.

    Read the article

  • Configuring RAID1 on HP Proliant Microserver N54L / Ubuntu 14.04.1 LTS [duplicate]

    - by Chris Beach
    This question already has an answer here: Cant find my harddrives in ubuntu installation? 2 answers I've bought a N54L and fitted two 3GB drives. Keen to get set up with RAID1. BIOS: SATA controller mode set to "RAID" RAID Option ROM utility: both physical drives set up as one logical drive When I came to install Ubuntu (14.04.1), both drives appeared during the setup process. I was only expecting to see the logical drive, although I'm a complete novice with RAID. I've read that the HP Proliant Microservers don't have "proper" RAID support, and require some kind of driver to be installed. I've tried a few HP utilities from the following apt repo: deb http://downloads.linux.hp.com/SDR/repo/mcp wheezy/current non-free On installation, most say "server not supported" Would appreciate your advice.

    Read the article

  • Open source tomcat log viewer

    - by Ari
    I'm managing several tomcat instances (aprox 30-35) and looking for some console to centralize the logs. I tried php-syslog-ng before (no with tomcat), and found it useful. I would like that these software would have some of these features: -Syntax highlight according to the severity of the exceptions. -Tree view for stack traces and nested exceptions. Bonus point: -Alarm when certain pattern is matched.

    Read the article

  • Why are UDP messages from outside the network received but not delivered?

    - by Warren Pena
    I have an Ubuntu Server 10.04 application I've developed that receives messages over a UDP port. The ultimate purpose of this application is to receive messages sent from workers' 3G modems out in the field. If use netcat on either another ubuntu Server or my Vista laptop (both on the same LAN as my test machine) to send a message, the message arrives correctly and appears in my application. However, if I go out to my car and use its 3G modem to send a message from the same Vista laptop, it doesn't work. If I run tcpdump -A, I see the message arrive correctly, but it's never delivered to my application. Clearly, the OS is the one making the choice not to deliver the messages (else they wouldn't appear in tcpdump nor would my app receive them when coming from local machines). I have not installed any firewall software on this machine, nor am I aware of anything installed by default that would block the traffic. sudo iptables --list returns Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination I'm not too familiar with iptables, but it looks to me like that's telling it to not do anything. What could be going on that's preventing my messages from being delivered?

    Read the article

  • Switching glassfish 2.x to 3.1.1

    - by Alexandre Abreu
    So I am managing a old java project that is using glassfish 2.x. Seems like netbeans does not support 2.x versions any more, so I want to change it to 3.1.1. How to properly make that change? I have JDK 1.6 installed. When I try to select the 3.1.1 does not fix the error "Unable to find Application Server J2EE" Thanks in advance. Sorry if this question is in the wrong place, this is really not my area.

    Read the article

  • Configure Postfix to send emails "via" a server [migrated]

    - by Zach Russell
    This is a question related to postfix and WordPress (but is more of a postfix question). To give some background, on a professional WordPress host (like WP Engine) when I receive WordPress Mail Notifications (comments, form submissions, new users, etc...) it will say in gmail sent from "predefined wordpress admin email" via email.wpengine.com. This is not blocked by Google's spam filters or anything. I have a cloud server set up and a WordPress site installed on it. When I send email from [email protected] it gets sent to spam and when I send email as [email protected] (me) it fails to send completely. This does, however send fine on WordPress. This goal of this it so send all emails via mail.wptemple.com and have them not get caught by spam filters. How can I accomplish this?

    Read the article

  • AIX: iscsi volumes disappear after reboot

    - by Dan
    We have an IBM P505 AIX box, with two internal disks and a defined iSCSI volume. The iSCSI volume is defined in it's own volume group, and is connected to an IBM iSCSI DS3300 disk array via the secondary onboard ethernet port (ie, we're not using a dedicated HBA, we're using the second onboard ethernet port for iSCSI exclusively.) When we reboot the AIX box, the iSCSI volume doesn't get mounted (which is fine; I've figured out that it fails to mount because AIX tries mounting it's volumes before starting the networking stack.) The problem is, after the server has booted it fails to redetect the iSCSI target as a physical disk. This means the volume group (iscsivg) can't go online. if I run cfgmgr -v to redetect the iscsi volume it successfully detects the iscsi target volume and creates a physical volume reference, but allocates it a different volume ID to what was defined before. eg - rootvg contains hdisk 0 and 1 iscsivg was originally defined with hdisk2 as the physical iSCSI volume. after reboot and running cfgmgr -v, AIX detects physical volumes hdisk0, hdisk11 and hdisk3. As there's no hdisk2, I can't varyon the iscsivg volume group. I can't seem any existing hdisk2 definition in the ODM. I can't easily add or change the definition of the physcial disk in the iscsivg volume group as it won't "varyon". Exporting the volume group deletes it completely, recreating the volume group by "importing" it from the reallocated disk makes it available again, but surely there's a better way? Can I force a specific hdisk drive designation for an iscsi target? How do you bring online iSCSI volumes after a reboot? I assume this "just works" with a dedicated HBA instead of a generic ethernet adapter? By the way, the iSCSI volume works fine once it's mounted; we only have problems getting it working - and only with AIX. The iSCSI array works fine with our Linux and Windows servers; ie the volumes get detected and remounted after boot time without any problems, using generic ethernet adapters. Here's some of the config from the AIX box: defined disks / devices: # lsdev hdisk0 Available 06-08-01-5,0 16 Bit LVD SCSI Disk Drive hdisk1 Available 06-08-01-8,0 16 Bit LVD SCSI Disk Drive hdisk3 Available Other iSCSI Disk Drive iscsi0 Available iSCSI Protocol Device scsi0 Available 06-08-00 PCI-X Dual Channel Ultra320 SCSI Adapter bus scsi1 Available 06-08-01 PCI-X Dual Channel Ultra320 SCSI Adapter bus ses0 Available 06-08-01-15,0 SCSI Enclosure Services Device sisscsia0 Available 06-08 PCI-X Dual Channel Ultra320 SCSI Adapter iscsi target definition in /etc/iscsi/targets: # IBM DS3300 disk array # port 1 on second controller 10.10.xx.xxx 3260 iqn.1992-01.com.lsi:1535.600a0b80005b0a7fxxxxxxxxxxxx physical volumes (after reimporting the volume group) # lspv hdisk0 0003b08a0d4936b6 rootvg active hdisk1 0003b08aaa5cb366 rootvg active hdisk3 0003b08a032d04bb iscsivg active

    Read the article

  • Route specific HTTP requests through pfSense OpenVPN

    - by DennisQ
    Hi, to start, I have very little knowledge on routes, iptables, etc. That said, here's what I'm trying to accomplish and where I think I'm stumped: Problem: We have an external website which we recently firewalled so it only accepts traffic from our office IP addresses. This works well at the office, but doesn't work for remote access through VPN as we don't route all traffic through OpenVPN. I would rather avoid forcing everyone to route all traffic through just to accommodate this one site. Environment: Main router box is running pfSense. Em0 is internal IP, Em1 is external. Internal net is 10.23.x and VPN is 10.0.8.0/24 I believe what I need to do is add a route to the VPN server config to send all traffic to that IP over the VPN tunnel. I think that part's working, but I don't get a response back, so I'm assuming that I need some NAT config on the VPN server to route the response back over the tunnel? What I've found so far is to try the following, but since this is a pfSense box on FreeBSD, I can't run iptables, etc. Make sure ip forwarding is enabled: echo 1 /proc/sys/net/ipv4/ip_forward Setup NAT back out: iptables -t nat -A POSTROUTING -s 10.0.8.0/24 -o em0 -j MASQUERADE Am I on the right path, and if so how do I accomplish this through pfSense UI or FreeBSD CLI? Thanks!

    Read the article

  • Experience with MooseFS?

    - by brown.2179
    Anyone have any experience using MooseFS? I want an easy distributed storage platform to store static data archive of about 10 TB and serve it to 20-40 nodes. Also I want to be able to add storage as the archive grows without having to rebuild the filesystem. I don't care if it's a bit slow. I just want it to be simple and stable. Basically from what I can see for OS X it's between MooseFS and Gluster. Any other suggestions?

    Read the article

  • New Dell PE R710 - Storage Question

    - by rihatum
    Hi All, Dell PE R710, received from Dell in the following state : Windows Disk 0 1800GB ( Volume C & D ) Windows Disk 1 526 GB (Volume E ) Perc6i Integrated Raid Controller 6 x 500GB Nearline SAS 7200RPM HDDs Raid 5 Configuration with two Virtual Disks I have installed Dell open Manage and it shows the following : Virtual Disk 0 - State : Background Initialization ( 7% ) Virtual Disk 1 - State : Background Initialization ( 25% ) Now when I click on Virtual Disk 0 it shows me all 6 Disks and the same happens when I click on Virtual Disk 1 it displays all 6 disks. But when I click on Storage Perc6i Connector 0 I get 4 Physical disks with the following numbers : Physical Disk 0:0:0 Physical Disk 0:0:1 Physical Disk 0:0:2 Physical Disk 0:0:3 When I click on Storage Perc6i Connector 1 I get 2 Physical Disks Listed in the following way : Physical Disk 1:0:4 Physical Disk 1:0:5 I am a little confused in this description, does this 1:0:4 interprets to Controller1, Disk4. Does this integrated raid card have two controllers coming out of it ? Also, When I first switched on the machine, the boot partition was showing 1GB Available out of 40GB, now its showing 38GB available out of 40GB. Is this because the Virtual Disks are still Initializing ? Any recommendations or suggestions ? Also, this server have 6 x 500GB NearLine SAS Hard drives, what would be a good raid config ? We are planning to use it for Hyper-V with quite a few (7 or 8) virtual servers, your suggestions would be helpful. Also, while the virtual disks are in a initialization state, can I destroy and re-create the raid configuration ? I would have to do it at the BIOS CTRL-M ? Thanks and Regards

    Read the article

  • Hyper-V Boot failure on VHD made with Acronis?

    - by gary
    hoping someone can advise on my problem, I am running Hyper-V core and trying to create my first VM for testing purposes. Using Acronis True Image echo server with UR I converted a Seerver 2000 tib to VHD. I then copied this across to the Hyper-V local drive and created a new VM pointing the hard drive to the vhd image. When I boot this up all I get is "Boot failure. Reboot and Select proper Boot device or Insert Boot media in selected Boot device". The original server had SCSI disks, the Hyper-V server doesn't, but I have ensured that it boots from an IDE disk and that it is in fact booting from that not the CD. I can only imagine this is caused by the SCSI disks on VHD but cannot for the life of me work out how to fix, I have several of these I need to do so starting to worry now! I can confirm that when I did this from tib to vmdk it worked first time using VMware on a laptop. Any help very much appreciated. Gary

    Read the article

  • APC + FPM memory fragmentation without a reason

    - by palmic
    My setup @ debian 6-testing is: nginx 1.1.8 + php 5.3.8 + php-fpm + APC 3.1.9 Because i use automatic deployment with apc_clear_cache() after deploy, my target is to set up APC to cache all my project (up to 612 php files smaller than 1MB) without files changes checking. My confs: FPM: pm.max_children = 25 pm.start_servers = 4 pm.min_spare_servers = 2 pm.max_spare_servers = 10 pm.max_requests = 500 APC: pc.enabled="1" apc.shm_segments = 1 apc.shm_size="64M" apc.num_files_hint = 640 apc.user_entries_hint = 0 apc.ttl="7200" apc.user_ttl="7200" apc.gc_ttl="600" apc.cache_by_default="1" apc.filters = "apc\.php$,apc_clear.php$" apc.canonicalize="0" apc.slam_defense="1" apc.localcache="1" apc.localcache.size="512M" apc.mmap_file_mask="/tmp/apc-php5.XXXXXX" apc.enable_cli="0" apc.max_file_size = 2M apc.write_lock="1" apc.localcache = 1 apc.localcache.size = 512 apc.report_autofilter="0" apc.include_once_override="0" apc.coredump_unmap="0" apc.stat="0" apc.stat_ctime="0" The problem is i have my APC memory fragmented into 5 pieces at 14,5MB loaded into memory which capacity is 64M. My system memory is 640MB, used about 270MB at most. The http responses lasts about 300ms - 5s. When i switch on apc.stat="1", the responses are about 50ms - 80ms which is quite good, but i cannot understand why is apc.stat="0" so much whorse. The APC diagnostic tool shows "1 Segment(s) with 64.0 MBytes (mmap memory, pthread mutex Locks locking)" in general cache information window so i hope i am right that it's mmap setup which allows tweaking APC shm onto upper values than shows system limit in /proc/sys/kernel/shmmax (my shows 33MB).

    Read the article

  • Authentication on Exchange using EWS managed API

    - by Jacob Proffitt
    I'm having a weird issue with the Exchange Web Services. The operation I'm attempting is pretty simple—pull a user's calendar items for the current week on our internal website. When testing locally, the ews managed API pulls the calendar information just fine. When deployed to the web server (using integrated windows authentication), it chokes. My trace is telling me that access is denied in the Exchange call. Initially, I thought this was a double-hop NTLM permissions issue, but it turns out that the service actually works for some internal users, but not for most. The only thing I can find that the functioning users have in common is that they are blackberry users and I surmise that their exchange permissions are setup differently. Or are their active directory accounts setup differently? I don't know and it's driving me crazy. I surmise that the blackberry app runs some scripts when a user is added to the application, but I'm completely unfamiliar with what may be going on behind the scenes there. So. Is there a way to duplicate the permissions those users enjoy (either AD or Exchange permissions)? And/or how exactly does one fix the double-hop credentials situation?

    Read the article

  • Setting write permissions for folders while creating a package with MSDeploy

    - by bala_88
    I'm using MSDeploy to create an artefact as a build step in NAnt. This particular build step is called on successful compilation. The artefact is then used to for deployment. Here is the step specified in my build file. <target name="BuildMsDeployPackage" depends="StageForMsDeployPackaging"> <exec program="${msdeploy.exe}" workingdir="${buildDirectory}" verbose="true" commandline="-verb:sync -source:iisapp=${packagingDirectory} -dest:package=${publishDirectory}\${webapp.artifact.zip}"/> The source here is my my web project. I want to be able to set specify write access to a couple of folders in the package that is created. Is this possible? I know that there is a setAcl provider for this specific purpose, but can this be used while creating a package?

    Read the article

  • IOError: [Errno 32] Broken pipe

    - by khati
    I got "IOError: [Errno 32] Broken pipe" while writing files in linux. I am using python to read each line a of csv file and then write into a database table. My code is f = open(path,'r') command = command to connect to database p = Popen(command, shell=True, stdin=PIPE, stdout=PIPE, stderr=PIPE, env=env) query = " COPY myTable( id, name, address) FROM STDIN WITH DELIMITER ';' CSV QUOTE '"'; " p.stdin.write(query.encode('ascii')) *-->(Here exactly I got the error, p.stdin.write(query.encode('ascii')) IOError: [Errno 32] Broken pipe )* So when I run this program in linux, I got error "IOError: [Errno 32] Broken pipe" . However this works fine when I run in windows7. Do I need to do some configuration in Linux sever? Any suggestions will be appreciated. Thank you.

    Read the article

  • Heroku SSL "certificate is only valid for the following names: *.herokuapp.com, herokuapp.com"

    - by benedict_w
    I'm trying to setup a Geotrust SSL certificate for my Heroku app using the SSL Endpoint addon and the instructions at https://devcenter.heroku.com/articles/ssl-endpoint. I generated my public key from my private key using: openssl rsa -in server.orig.key -out server.key and added to the heroku certs: heroku certs:add server.crt server.key Everything seemed to be fine. heroku certs listed the corrected information only with Trusted = false for my certificate. If I go to https://tokyo-2121.herokussl.com the browser says: You attempted to reach tokyo-2121.herokussl.com, but instead you actually reached a server identifying itself as www.mydomain.com. As expected with the certificate apparently identifying the correct domain, but When I set up the CNAME to the given tokyo-2121.herokussl.com and visit my subdomain the browser says: www.mydomain.com uses an invalid security certificate. The certificate is only valid for the following names: *.herokuapp.com , herokuapp.com If I run curl -kv https://www.mydomain.com I get: subjectAltName does not match www.mydomain.com

    Read the article

  • Loadbalancing outbound traffic while using openbgpd on freebsd

    - by Rajkumar S
    Hi, I am using openbgpd in freeBSD with 2 ISP connections. I have my own AS number and a /22 network. Currently I am advertising entire /22 to both networks. Inbound traffic comes in But my outbound traffic goes via a single link. I would like to either distribute my outbound traffic via both links so that outbound traffic is also load balanced. How to configure this using openbgpd in freebsd? My current openbgpd config is attached for reference. AS 00my-as listen on xx.xx.xx.x router-id xx.xx.xx.x network aa.aa.aa.0/22 group "ISP1" { remote-as 11remoteas-1 neighbor bb.bb.bb.1 { descr "ISP1" announce all } } group "ISP2" { remote-as 22remoteas-2 neighbor cc.cc.cc.37 { descr "ISP2" announce all } } deny from any deny to any allow from bb.bb.bb.1 allow to bb.bb.bb.1 allow from cc.cc.cc.37 allow to cc.cc.cc.37

    Read the article

  • Unix LVM: how to resize root lvm

    - by Hussein Sabbagh
    I took over a virtual server at work after a co-worker left. He, however, setup the server incorrectly at multiple stages and im cleaning them up as I run into them... Currently I realized that the file system is broken in half onto 2 logical volumes both at 50gb. One is mounted as the root directory and the other as the /home directory. Saddly, the server has taken up 46gb of the root lv and i need to expand it. I have already shrunk and remounted the home lv. I resized the root lv, but I can't figure out how to unmount the root directory while the computer is on. Obviously this needs to be done before I can finalize the expansion, but I don't know how. I'd appreciate any help or pointing in the right direction. Thanks in advance. PS this is on a CentOS server.

    Read the article

  • Apache Redirect to Jboss SSL

    - by Rick
    I'm trying to have an SSL Connection to an Apache server on port 443 which I want to use to proxy connections to a JBoss server on a different port. The SSL certificates sit on the Jboss server not on the Apache server. Is it possible to redirect HTTPS traffic from Apache to the Jboss Server and have the JBoss server do the SSL handshake? The Apache server must be able to redirect HTTPS traffic for two different URLS. One for a secure site. The other for access to web services. By the way I'm using it mutual authentication, if that makes any difference. What does the Apache config file need to contain? or are there any good example of this out there? Thanks

    Read the article

  • Is anyone using KVM in production?

    - by Andy Shellam
    I've been trying to set up a pair of servers utilising KVM on Ubuntu 9.10 to host 8 virtual machines between them and ended up with various issues from the VMs freezing, to not powering on. I had one virtual server set up and running and was setting up a second, when any operation involving OpenSSL would cause the VM to lock up in a weird way - all network traffic would cease, it wouldn't process logins on the console, but it wasn't taking any CPU time off the host. The first virtual server was identical and worked perfectly. Another VM I tried to setup had installed Ubuntu fine then refused to reboot, throwing kernel exceptions to do with XFS. I've now installed Citrix XenServer 5.5 on both hosts, and am now setting up my third VM with absolutely no issues. I also had the same experience when I tried VMware, but I preferred Xen as it appears to give more features on the free license. My question is am I just unlucky with KVM, or is KVM as unstable as it appears? Are you using, or planning on using, KVM in production, and how successful have you been?

    Read the article

< Previous Page | 121 122 123 124 125 126 127 128 129 130 131 132  | Next Page >