Search Results

Search found 38783 results on 1552 pages for 'graphical screen issue'.

Page 129/1552 | < Previous Page | 125 126 127 128 129 130 131 132 133 134 135 136 | Next Page >

Cisco 3560+ipservices -- IGMP snooping issue with TTL=1

- by Jander

I've got a C3560 with Enhanced (IPSERVICES) image, routing multicast between its VLANs with no external multicast router. It's serving a test environment where developers may generate multicast traffic on arbitrary addresses. Everything is working fine except when someone sends out multicast traffic with TTL=1, in which case the multicast packet suppression fails and the traffic is broadcast to all members of the VLAN. It looks to me like because the TTL is 1, the multicast routing subsystem doesn't see the packets, so it doesn't create a mroute table entry. If I send out packets with TTL=2 briefly, then switch to TTL=1 packets, they are filtered correctly until the mroute entry expires. My question: is there some trick to getting the switch to filter the TTL=1 packets, or am I out of luck? Below are the relevant parts of the config, with a representative VLAN interface. I can provide more info as needed. #show run ... ip routing ip multicast-routing distributed no ip igmp snooping report-suppression ! interface Vlan44 ip address 172.23.44.1 255.255.255.0 no ip proxy-arp ip pim passive ... #show ip igmp snooping vlan 44 Global IGMP Snooping configuration: ------------------------------------------- IGMP snooping : Enabled IGMPv3 snooping (minimal) : Enabled Report suppression : Disabled TCN solicit query : Disabled TCN flood query count : 2 Robustness variable : 2 Last member query count : 2 Last member query interval : 1000 Vlan 44: -------- IGMP snooping : Enabled IGMPv2 immediate leave : Disabled Multicast router learning mode : pim-dvmrp CGMP interoperability mode : IGMP_ONLY Robustness variable : 2 Last member query count : 2 Last member query interval : 1000

Read the article
IIS permissions issue pointing docroot to Samba share

- by lalalalalalalambda

I have an IIS project which is stored on a Samba shared, network mounted with the following line: X: \\my-samba-server\dev /user:freddie Connectivity is fine, can read/write files from X:. In IIS, I'm trying to set it as the Physical path via \\my-samba-server\dev\folder\to\my\files, which results in the following 500.19 error: Config Error | Cannot read configuration file due to insufficient permissions It is by default trying to use the Pass-through authentication. If I try to set this to connect as the specific user freddie, I receive: The specified user does not exist What is the correct way to connect to a path which has been setup as described above? *Samba man pages indicate version 3.6 is on the Debian host

Read the article
Apache on Mac Mavericks issue

- by Michael

Trying to run Apache so that I can create a testing server on my mac.When I start apache it starts, but it doesn't run (no connection to local host. Ill upload the unix,you'll see that after starting there is no processes, and I did a check to show you what was running on my port 80... I don't entirely know that means. Michaels-MacBook-Pro-3:~ michaelramos$ sudo apachectl start Michaels-MacBook-Pro-3:~ michaelramos$ ps aux | grep httpd michaelramos 348 0.0 0.0 2442000 624 s000 S+ 8:51AM 0:00.00 grep httpd Michaels-MacBook-Pro-3:~ michaelramos$ sudo apachectl start org.apache.httpd: Already loaded Michaels-MacBook-Pro-3:~ michaelramos$ sudo lsof -i ':80' COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME ocspd 96 root 18u IPv4 0x8402f926599c58df 0t0 TCP dhcp-92-67.radford.edu:49267->108.162.232.196:http (ESTABLISHED) ocspd 96 root 20u IPv4 0x8402f926599c58df 0t0 TCP dhcp-92-67.radford.edu:49267->108.162.232.196:http (ESTABLISHED) ocspd 96 root 21u IPv4 0x8402f926599c50f7 0t0 TCP dhcp-92-67.radford.edu:49268->108.162.232.206:http (ESTABLISHED) ocspd 96 root 23u IPv4 0x8402f926599c50f7 0t0 TCP dhcp-92-67.radford.edu:49268->108.162.232.206:http (ESTABLISHED)

Read the article
Apache Configuration Issue - website without www going to default site

- by Brian

I have included a copy of my virtual host file for apache below. (However I have hidden the ip address and domain name for now) My problem is that the following work: www.mydomainnamehere.org www.mydomainnamehere.com mydomainnamehere.com This one doesn't work: mydomainnamehere.org - instead of going to the document root listed below, it goes to the document root of the default site. What could be causing this? <VirtualHost [ipaddresshidden]:80> ServerAdmin [email protected] ServerName mydomainnamehere.org ServerAlias www.mydomainnamehere.org ServerAlias mydomainnamehere.com ServerAlias www.mydomainnamehere.com DocumentRoot /home/www/mydomainnamehere.org/html/ ErrorLog /home/www/mydomainnamehere.org/logs/error.log CustomLog /home/www/mydomainnamehere.org/logs/access.log combined </VirtualHost>

Read the article
Outlook 2007 to 2010 upgrade - Invisible folders issue

- by Mahesh

Hi, I upgraded my outlook 2007 to 2010. Everything was smooth, but realised later that, some of the archeive folders are missing. But, When I did a search on my archeive for a mail(exists in missing folder), it is able to show the mail in the search results. It is also showing the missing folder name in the search results. Please let me know why this is happening and a possible resolution. Thanks a lot. Mahesh

Read the article
OpenSuse 11.2 USB issue

- by sameerinfodb

hi, I just installed the openSuse 11.2 , but i insert my pen drive to usb port it is not getting recognised and mounted, I used following the command to prob the OS lsusb = no results lshal |grep usb = not result

Read the article
Cannot access client pc remotely due to time/date issue xp win2k3 environment

- by Flotsam N. Jetsam

When I run psexec to the user desktop (xp pro) I get "There is a time and/or date difference between the client and the server." I also get "access denied" when I run the at \clientname time /interactive "net time \server /set /y" command. I cannot access the machine from my win2k3 server's AD Users and Computers utilities. Is going to the machine the only way to remedy? Clarify: Going to the machine and doing the net time command works, but I want a remote solution please.

Read the article
SubDomain creation issue.Ubuntu 12.04 Apache 2.22 Webmin

- by anarchos78

I have a technical question concerning subdomains. My installation is UBUNTU 12.04 and WEBMIN for administration (using Apache web server). I am trying to create a subdomain to one IP (the domain is www.ithemis.gr and I want to create test.ithemis.gr and/or test1.ithemis.gr) with no success. I think I've tried the right way to set subdomains. The address does not resolving (I have already created DNS records via BIND). Do you have any suggestions? I am very new in server administration. Any help will be greatly appreciated! Apache configuration: In /etc/apache2/sites-available: Conf file:www.ithemis.gr.conf (main website) <VirtualHost 184.171.255.110:80> DocumentRoot /home/ithemis.gr ServerName www.ithemis.gr <Directory "/home/ithemis.gr"> allow from all #Options +Indexes Options +Includes -Indexes </Directory> </VirtualHost> Conf file:www.test.ithemis.gr.conf (subdomain website): <VirtualHost *:80> DocumentRoot /home/test.ithemis.gr ServerName test.ithemis.gr <Directory "/home/test.ithemis.gr"> allow from all Options +Indexes </Directory> </VirtualHost> My DNS records: Master Zone: ithemis.gr Name Type TTL Values ithemis.gr. NS Default ns1.themis.gr. ithemis.gr. A Default 184.171.255.110 ns1.ithemis.gr. A Default 184.171.255.110 ns2.ithemis.gr. A Default 184.171.255.110 mail.ithemis.gr. A Default 184.171.255.110 www.ithemis.gr. CNAME Default ithemis.gr. ithemis.gr. MX Default 5 mail.ithemis.gr. www.test.ithemis.gr. CNAME Default ithemis.gr. test.ithemis.gr. CNAME Default ithemis.gr.

Read the article
Ping, firewall or DNS issue on Win Server 2008 R2

- by Fred Kaiser

I've installed windows server 2008 as a VM for the developers here to work on. Installed SQL Server 2008 as well as IIS7. I am not quite sure why, I can remote into that machine using the name I gave to it (winserverdev) but the guys that are supposed to use the bloody thing can't. One very interesting thing is that I can connect but I can't ping... not the name nor the IP address. Is there anything that I should be looking in order to make it work? Any ideas are welcome. Thanks heaps in advance, I really appreciate it.

Read the article
Weird Windows 2003 MSDTC and SQL 2005 issue

- by seagull surfer

scenario: Windows 2003 sp2 x64 enterprise edition. SQL 2005 sp2 cu9 x64 Enterprise edition After restarting the resource groups on two node active-active cluster, 3 SQL 2005 instances start up fine. The 4th one starts up but starts throwing the following error. "Enlist operation failed: 0x8004d00e(XACT E NOTRANSACTION). SQL Server could not register with Microsoft Distributed Transaction Coordinator (MS DTC) as a resource manager for this transaction. The transaction may have been stopped by the client or the resource manager." MSDTC is fine since the other 3 function normally. The only way to "fix" it is to take the 4th instance offline and bring it online again. Is there any way to fix this enlistment without restarting?

Read the article
Ubuntu SSH issue

- by palani

Hi, I have the ubntun machine... under my /home/user/.ssh i have my id_rsa.pub key... i carefully copied that key and paste my key to respository Git account. After that i try to connect from locat system to my git respository i got the following error warning: Authentication failed. Disconnected; no more authentication methods available (No further authentication methods available.). . I removed SSH in system and re-enable and did agin.. but no luck.... I have no idea what's happening with my SSH key ....can any one please tell me on this... Note : i noticed in my home /home/user/.ssh && /home/user/.ssh2

Read the article
Ubuntu SSH issue

- by palani

0 Hi, I have the ubntun machine... under my /home/user/.ssh i have my id_rsa.pub key... i carefully copied that key and paste my key to respository Git account. After that i try to connect from locat system to my git respository i got the following error warning: Authentication failed. Disconnected; no more authentication methods available (No further authentication methods available.). . I removed SSH in system and re-enable and did agin.. but no luck.... I have no idea what's happening with my SSH key ....can any one please tell me on this... Note : i noticed in my home /home/user/.ssh && /home/user/.ssh2

Read the article
Mongo daemon restarts after replica set issue

- by Matt Beckman

We had a recent election in our replica set (2 read nodes; 1 write node) that changed the primary node. Curious as to why this occurred, I started looking through the logs to find out what happened. It appears that mongoNode2 could not communicate with mongoNode3. When both nodes could not communicate, it appears that this caused the services on mongoNode2 and mongoNode3 to restart, eventually resulting in a new primary after the services had been started again. Thu Jun 23 08:27:28 [ReplSetHealthPollTask] DBClientCursor::init call() failed Thu Jun 23 08:27:28 [ReplSetHealthPollTask] replSet info mongoNode3:27017 is down (or \ slow to respond): DBClientBase::findOne: transport error: mongoNode3:27017 query: { \ replSetHeartbeat: "myReplSet", v: 3, pv: 1, checkEmpty: false, from: \ "mongoNode2:27017" } Thu Jun 23 08:27:29 got kill or ctrl c or hup signal 15 (Terminated), will \ terminate after current cmd ends Thu Jun 23 08:27:29 [interruptThread] now exiting Thu Jun 23 08:27:29 dbexit: Is there any reason that the mongo service would restart due to a DBClientCursor::init call() failure? Is this a known bug? It should be noted that mongoNode2 and mongoNode3 are VMs on the same VMware host. MongoNode1 is not on the same host, and it did not have any issues with the service. However, I did not have any other reports of issues with other VMs on the VMware host.

Read the article
Issue Connecting two home networks

- by Alex

Hi, I have a home networking question. I have two DLINK wireless/wired routers in my house, connected to the Internet ISP. There are a 2 computers on each of the two networks. Network1: has 192.168.0.0 (gateway) Valid IP'S range - 192.168.0.1 - 192.168.0.10, with COMP1 having a fixed IP of 162.168.0.1 Network2: has 192.168.0.100 (gateway) Valid IP'S range - 192.168.0.101 - 192.168.0.110 with COMP2 having a static IP of 162.168.0.101, a WIRELESS printer on 192.168.0.102 Both routers have a netmask of 255.255.255.0 My need is to connect the two routers, so that I can Remote desktop for COMP1 to COMP2 and viceversa, and COMP1 to connect to the wireless printer on Network2. can anyone help to set this up so that the both networks can talk to each other. Any help is appreciated. -Alex

Read the article
DNS Replication issue

- by BillN

We host the DNS for our domain. Two weeks ago, the developer requested that we setup a new zone 'dev.ourdomain.com' and place two host records in it my.dev.ourdomain.com and admin.dev.ourdomain.com. We added the zone to our DNS and added A records for the host. Now a week later, some DNS servers like google (8.8.8.8) and gtei (4.2.2.2) will resolve the hosts, but others like OpenDNS (208.67.222.222 ) and ATT Uverse (68.94.156.1) cannot resolve it. Any Ideas?

Read the article
wild card redirects issue giving error this webpage has a redirect loop

- by david

In my website I changed or better word modified the directory name ""vehicles-cars"" to ""vehicles-cars-for-sale"" when i tried to redirect using wild card redirect my old directory name to new directory name in my web hosting cpanel account. every time when i open pages from that directory i am getting error code. This web-page has a redirect loop. The website is php. The problem is that that my lots of pages from old directory are indexed in googles and they are getting duplicate contents. If I redirect single page it works perfect but there are lots of pages so I need wild card redirect to redirect whole directory . I really need some advice what to do with this problem. Here is .htaccess file code for redirect thanks RewriteEngine on RewriteCond %{HTTP_HOST} ^example\.com$ [OR] RewriteCond %{HTTP_HOST} ^www\.example\.com$ RewriteRule ^vehicles\-cars\/?(.*)$ "http\:\/\/example\.com\/vehicles\-cars\-for\-sale\/$1" [R=301,L] i have other wilcard redirect of whole directory with same code and its working perfect here is the code in .htaccss file which is same as above and working perfect for this directory RewriteCond %{HTTP_HOST} ^adsbuz\.com$ [OR] RewriteCond %{HTTP_HOST} ^www\.adsbuz\.com$ RewriteRule ^autos\/?(.*)$ "http\:\/\/adsbuz\.com\/vehicles\-cars\-for\-sale\/$1" [R=301,L] so i dont understand whats wrong with the above code please i really need some expert advice thanks again

Read the article
Nginx reverse proxy IP issue

- by Tiffany Walker

For some reason Apache is still seeing my SERVERS ip. Is this an nginx problem? /etc/nginx.conf user nobody; # no need for more workers in the proxy mode worker_processes 4; error_log /var/log/nginx/error.log info; worker_rlimit_nofile 20480; events { worker_connections 5120; # increase for busier servers use epoll; # you should use epoll here for Linux kernels 2.6.x } http { server_name_in_redirect off; server_names_hash_max_size 10240; server_names_hash_bucket_size 1024; include mime.types; default_type application/octet-stream; server_tokens off; disable_symlinks if_not_owner; sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 5; gzip on; gzip_vary on; gzip_disable "MSIE [1-6]\."; gzip_proxied any; gzip_http_version 1.1; gzip_min_length 1000; gzip_comp_level 6; gzip_buffers 16 8k; # You can remove image/png image/x-icon image/gif image/jpeg if you have slow CPU gzip_types text/plain text/xml text/css application/x-javascript application/xml image/png image/x-icon image/gif image/jpeg application/xml+rss text/javascript application/atom+xml; ignore_invalid_headers on; client_header_timeout 3m; client_body_timeout 3m; send_timeout 3m; reset_timedout_connection on; connection_pool_size 256; client_header_buffer_size 256k; large_client_header_buffers 4 256k; client_max_body_size 200M; client_body_buffer_size 128k; request_pool_size 32k; output_buffers 4 32k; postpone_output 1460; proxy_temp_path /tmp/nginx_proxy/; client_body_in_file_only on; log_format bytes_log "$msec $bytes_sent ."; include "/etc/nginx/vhosts/*"; } proxy.inc proxy_connect_timeout 59s; proxy_send_timeout 600; proxy_read_timeout 600; proxy_buffer_size 64k; proxy_buffers 16 32k; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; proxy_pass_header Set-Cookie; proxy_redirect off; proxy_hide_header Vary; proxy_set_header Accept-Encoding ''; proxy_ignore_headers Cache-Control Expires; proxy_set_header Referer $http_referer; proxy_set_header Host $host; proxy_set_header Cookie $http_cookie; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-Host $host; proxy_set_header X-Forwarded-Server $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; vhost file: server { error_log /var/log/nginx/vhost-error_log warn; listen 63.6.1.12:80; server_name photo-rolldomain.com www.domain.com; access_log /usr/local/apache/domlogs/domain.com-bytes_log bytes_log; access_log /usr/local/apache/domlogs/domain.com combined; root /home/mtech/public_html; location / { location ~.*\.(3gp|gif|jpg|jpeg|png|ico|wmv|avi|asf|asx|mpg|mpeg|mp4|pls|mp3|mid|wav|swf|flv|html|htm|txt|js|css|exe|zip|tar|rar|gz|tgz|bz2|uha|7z|doc|docx|xls|xlsx|pdf|iso)$ { expires 7d; try_files $uri @backend; } error_page 405 = @backend; add_header X-Cache "HIT from Backend"; proxy_pass http://63.6.1.12:8081; include proxy.inc; } location @backend { internal; proxy_pass http://63.6.1.12:8081; include proxy.inc; } location ~ .*\.(php|jsp|cgi|pl|py)?$ { proxy_pass http://63.6.1.12:8081; include proxy.inc; } location ~ /\.ht { deny all; } }

Read the article
Blue screen MEMORY_MANAGEMENT on Windows 7 Enterprise

- by Lucas Kauffman

I'm running a machine (MSI GT 70) with 32 GB ram as a mobile server. It seems that at random points in time it will BSOD with as message MEMORY_MANAGEMENT. So the first thing I did was do several memtests, but they did not give away any defective modules. I'm a bit clueless at the moment as it just seems to happen at random points in time giving me little or no indication of what might be wrong. I opened up the dumps with BSODviewer, they just seem to point to the windows kernel. I tried reinstalling Windows but the behavior remains the same.

Read the article
linux routing issue

- by Duc To

Hi! I have 2 linksys routers which has linux running on it and using tomato firmware.. both has internet lines plugged on but only 1 acts as DHCP server (router 1) What I am having to achieve is that all packets goes to router 1 from internal IPs want to access internet will go out to that internet line but from 1 specific port, if router 1 detects packets from a specific source port (for ex: http port: 80), it will redirect that packet to router 2 and goes out to the internet from there.. I have found some documents which give solution that I will need a linux servers with 2 ethernet cards and then we plug both internet lines on that server and routing base on it but I do not want to do that because my boss does not want to have an extra work mantaining that server, besides, he says that the router itself already a linux one so why.. I tend to agree his points.. Can it be done or a seperate linux server acting as a router is a must? Thank you all in advance and really look forward in your replies.. I am newbie to linux network and it seems to be something out of my capacity to solve :( Your sincerely! Duc To

Read the article
Production Instance : CLOSE_WAIT Connection Issue

- by rajnikant

I am using 10EC2 Instances behind 1 ELB. And ELB configured 80 to 8080 and 443 to 8080 port. And all 10EC2 instances having installed with Apache Tomcat, total request on ELB around 8000 to 10000 in 1 minute. I am facing problem for CLOSE_WAIT connection on 10 EC2 Instance, having Apache Tomcat. EC2 Instance Type : m1.xlarge When we restart the Apache Tomcat, all CLOSE_WAIT connections are lost, but its not proper way to work on Production Instances. Please help me out.

Read the article
ssl_error_log apache issue

- by lakshmipathi

https://localhost works but https://ipaddress didn't cat logs/ssl_error_log [Mon Aug 02 19:04:11 2010] [error] [client 192.168.1.158] (13)Permission denied: access to /ajaxterm denied [root@space httpd]# cat logs/ssl_access_log 192.168.1.158 - - [02/Aug/2010:19:04:11 +0530] "GET /ajaxterm HTTP/1.1" 403 290 [root@space httpd]# cat logs/ssl_request_log [02/Aug/2010:19:04:11 +0530] 192.168.1.158 SSLv3 DHE-RSA-CAMELLIA256-SHA "GET /ajaxterm HTTP/1.1" 290 httpd.conf file NameVirtualHost *:443 <VirtualHost *:443> ServerName localhost SSLEngine on SSLCertificateFile /etc/pki/tls/certs/ca.crt SSLCertificateKeyFile /etc/pki/tls/private/ca.key <Directory /usr/share/ajaxterm > Options FollowSymLinks AllowOverride None Order deny,allow Allow from All </Directory> DocumentRoot /usr/share/ajaxterm DirectoryIndex ajaxterm.html ProxyRequests Off <Proxy *> # Order deny,allow Allow from all </Proxy> ProxyPass /ajaxterm/ http://localhost:8022/ ProxyPassReverse /ajaxterm/ http://localhost:8022/ ErrorLog error_log.log TransferLog access_log.log </VirtualHost> How to fix this ?

Read the article
rewrite redirect issue in debian squeeze

- by hd01

My server os is debian squeeze. I have these lines to redirect non-www to www in htaccess file of my website: RewriteCond %{HTTP_HOST} !^www\.example\.com$ [NC] RewriteRule ^(.*)$ http://www.example.com/$1 [L,R=301] but it cause this error in firefox: The page isn't redirecting properly Firefox has detected that the server is redirecting the request for this address in a way that will never complete. This problem can sometimes be caused by disabling or refusing to accept cookies. when I comment those lines in htaccess mysite appears but in non-www format. I'm sure it works well before on the Ubuntu . but I don't know why it doesn't work now. would you help me?

Read the article
Virtual PC 2007 Full Screen Resolution

- by Swami

I have a laptop (1440 x 900) and an external monitor (1920 x 1200), and I'm running Virtual PC 2007. Initially, my VPC could not switch to fullscreen mode on my external monitor because the max resolution for VPC was only 1600 x 1200. I installed a hotfix (http://support.microsoft.com/kb/958162) and after the hotfix, I was able to view VPC in fullscreen mode on my external monitor, but now I'm unable to view fullscreen on my laptop. It says "please check that the resolution of the guest is not higher than that of the host". I even tried to decrease the resolution of my Virtual PC to less than than of my laptop, but it always resets it back up. So now after the hotfix, I can view fullscreen mode only when my external monitor is plugged in. Any way I can resolve this?

Read the article
Third-party Information Screen Opening Blank

- by Jacob

I'm working with a client who is trying to use our software, which accesses information (sends & receives) from a third-party website. When this client tries to access these pages, a window opens, as expected, but is completely blank and no error message is received. This is the first time I've seen this with many other clients successfully using this product, which leads me to believe that it has something to do with the settings on the computer somewhere, but cannot figure out what might be happening. Windows Server 2003 R2, Standard Edition, Service Pack 2. Firewall is already off. Tried AVG on & temporarily disabled.

Read the article
Issue with https:// url going to an unknown location

- by Brandon

We have a website (ASP.NET/Plesk 9.5.5) that can be accessed just fine through the regular URL (http://example.com). However when accessing the site through https://example.com the site displays the invalid security certificate warning, which is fine since we don't have an SSL certificate. If I add an exception, I'm sent to a completely separate site that is apparently hosting a malware script (I'm still on https://example.com though). Because of this Google has flagged the site as dangerous. I can't find anything in the Plesk panel that would help fix this, and as far as I can tell those files don't exist on our server. How do I tell where the https:// link is sending me? I'm not that familiar with DNS, but is that what is causing this behavior?

Read the article

< Previous Page | 125 126 127 128 129 130 131 132 133 134 135 136 | Next Page >