Search Results

Search found 5109 results on 205 pages for 'playing cards'.

Page 129/205 | < Previous Page | 125 126 127 128 129 130 131 132 133 134 135 136  | Next Page >

• X won't start, root filesystem mounted read only

  - by TK Kocheran

  I just experienced a very strange and puzzling problem on my machine that I can't seem to get sorted out. I was running Windows on a second partition, and everything was working great. I then went to restart into Linux, and noticed that X wouldn't start. Everything was displayed in super-low resolution, so I tried reinstalling my NVIDIA driver. I started seeing all of these I/O error problems, so I figured that my SSD was bad. After a bit more playing around, I ran fsck on the drive when mounted from a startup disk as well as badsectors and everything looked great. The SMART drive tests all passed and again, everything was looking good, so I rebooted again and still, no joy. I started then getting some weird USB errors, so I followed someone's advice and unplugged my computer's power supply, then started back up again and my graphics looked a lot better in the BIOS and in the boot logo, but X still wouldn't start. I then found out that my main boot drive was being mounted read-only for some reason. What's going wrong? I've done some pretty extensive tests on the SSD from a startup disk such as writing massive files, reading big files, running filesystem checks on the entire disk, and everything is looking great, until I try to boot. Whenever I try installing the drivers with apt-get, I get a ton of ata error messages looking like this: How can I diagnose what's going wrong and fix it so I can get back to work?

  Read the article

• Any danger in using the Wine workaround in 12.04?

  - by TrailRider

  To run certain Windows programs in WINE you need to this workaround: echo 0|sudo tee /proc/sys/kernel/yama/ptrace_scope According to the support websites, this is due to a bug in the Ubuntu kernel that prevents ptrace and WINE playing well together. Using the above command you set the ptrace to 0 which according the research I've done(don't ask me which websites, I have seem a lot of them), ptrace has to do with the interactions between programs. The 0 setting is more permissive than the 1. I have to assume that there was a good reason Ubuntu wanted the ptrace=1 so this leads me back to the short form of the question. Are there any risks involved in setting ptrace=0. Lower security? problems debugging? any others that I haven't thought of??? P.S. for anybody reading this that wonders what the bug causes, the Windows programs will fail to open at all, in the System Monitor you will see many instances of the program trying to open and then they will eventually all quit and if you run the progam for the terminal you will get an error that tells you that the maximum number of program instances has been reached.

  Read the article

• Kindle App for WP7 arrives

  - by dotgeek

  If you had asked me if I was interested in owning a Kindle device, then my response a couple months back would have been a flat out no back then. So what has changed between now on then you might be asking me then? I would have to say watching my wife enjoy the many books in digital form has peeked my interest to start with now. Was that enough for me to buy a Kindle though? Not just yet, but that is where the Windows Phone 7 comes in for me once again. It’s no secret that I’ve wanted this device and yes it does have a number of Apps that I think I’ll really enjoy. The latest must have App for me, will most certainly be the Kindle App for Windows Phone 7, released from Amazon today. I’ve already started playing around with the PC version of Kindle software and I’m looking at purchasing any future books in digital form now. So it’s a given once I have a Windows Phone 7 device, that I’ll be enjoying some of my favorite books, while I’m on the go I think and via this App. Tonight I actually had a chance to check out the WP7 Kindle App on a friends device and I was really pleased with how it looked and performed. Now if the planets could only manage to lineup for me and allow Verizon and Microsoft to come to terms on the releasing of WP7 CDMA devices, I just might be able to really enjoy some of this on my own. Do I rule out ever having an actual Kindle device? Not at all, but I do plan on having the WP7 device well before that day ever comes though.

  Read the article

• I just recursively chmod'd everything under / to 750. Any tips?

  - by Ouairz

  I won't be the first and I won't be the last, I suppose. While playing around with the find command, I made a whoops and it would appear that instead of changing the permissions of the ~/web directory to 750, it changed the permissions of the entire filesystem (/) to 750, however I'm not certain, but any attempt to investigate is thwarted by Permission denied messages. For everything. This was the offending command: sudo find ~/web . type d -exec chmod 750 {} If I'm not mistaken, the Ubuntu team disabled root logins as a safety precaution so I'm out of ideas. I'm (obviously) a total newbie when it comes to file permissions so I was wondering if anyone had some good or even some bad advice to share. I've mentally prepped myself to losing everything on the computer which is only of mild consequence, since I have backups, but I did do a bit of work on this box over the week and it would be a shame to lose it all due to a boneheaded mistake. If you are reading this message, ask yourself, have you backed up any of your work recently? Thanks in advance for any insights. Feel free to scold me for using sudo carelessly

  Read the article

• What is the value of workflow tools?

  - by user16549

  I'm new to Workflow developement, and I don't think I'm really getting the "big picture". Or perhaps to put it differently, these tools don't currently "click" in my head. So it seems that companies like to create business drawings to describe processes, and at some point someone decided that they could use a state machine like program to actually control processes from a line and boxes like diagram. Ten years later, these tools are huge, extremely complicated (my company is currently playing around with WebSphere, and I've attended some of the training, its a monster, even the so called "minimalist" versions of these workflow tools like Activiti are huge and complicated although not nearly as complicated as the beast that is WebSphere afaict). What is the great benefit in doing it this way? I can kind of understand the simple lines and boxes diagrams being useful, but these things, as far as I can tell, are visual programming languages at this point, complete with conditionals and loops. Programmers here appear to be doing a significant amount of work in the lines and boxes layer, which to me just looks like a really crappy, really basic visual programming language. If you're going to go that far, why not just use some sort of scripting language? Have people thrown the baby out with the bathwater on this? Has the lines and boxes thing been taken to an absurd level, or am I just not understanding the value in all this? I'd really like to see arguments in defense of this by people that have worked with this technology and understand why its useful. I don't see the value in it, but I recognize that I'm new to this as well and may not quite get it yet.

  Read the article

• Acer S3 SSD and HD Deleted partitions?

  - by user207784

  I'm new to Linux and Ubuntu, and I think I have a problem. I have an Acer Aspire S3 with 20GB SSD and 320GB HD. I installed Ubuntu 12.04 64bit on it today, and when it asked about partitions, without knowing better, I erased the partitions. There is some information at https://help.ubuntu.com/community/AspireS3 about using the SSD and HD efficiently, but since I deleted the partitions, I don't know what to do. How can I recreate the partitions mentioned in the above link so that I can take advantage of having SSD and HD? I installed GParted, but I don't know what I should do now, and I don't want to screw things up further. I greatly appreciate any help that can be offered me. EDIT: I was playing with GParted, and I just realized that I can see dev/sda and dev/sdb, so perhaps I didn't do something horrible to my partitions. I am also sorry for asking such (dumb?) questions. At this point, is there a way to tell whether I have actually screwed up my partitions? Thanks, Joe

  Read the article

• M-Audio Delta starts up at wrong sample rate

  - by steevc

  When the PC starts my M-Audio Delta 66 is using 48000kHz sampling rate when it is set for 44100 in Envy24. This causes audio to play slower than it should. This is in Kubuntu 14.04 on my new PC using an AMD A8 6500 with 8GB. When I first installed it seemed okay, but at some point it went wrong and has been doing this consistently since then. Kernel is 3.13.0-24-generic #47-Ubuntu SMP Fri May 2 23:31:42 UTC 2014 i686 athlon i686 GNU/Linux steve@slarti:~$ cat /proc/asound/card2/pcm0p/sub0/hw_params access: MMAP_INTERLEAVED format: S32_LE subformat: STD channels: 10 rate: 48000 (48000/1) period_size: 441 buffer_size: 3528 I can get it to switch to 44100 if I disable/enable the Delta in Pulseaudio volume control, but I have to do this every day and the sound still seems distorted. I can't see any issues in any of the config or log files I can find. If I boot the PC with a Mint Live USB it starts at 44100 and sound fine. Originally reported on Youtube is playing at the wrong speed - maybe soundcard related, but I'll close that and have this more relevant question instead.

  Read the article

• Weekend Project: Build a Fireball Launcher

  - by Jason Fitzpatrick

  What’s more fun than playing with fire? Shooting it from your hands. Put on your robe and wizard hat, make a stop at the hardware store, and spend the weekend trying to convince your friends you’ve acquired supernatural powers. Over at MAKE Magazine, Joel Johnson explains the impetus for his project: A stalwart of close-quarter magicians for years, the electronic flash gun is a simple device: a battery-powered, hand-held ignitor that uses a “glo-plug” to light a bit of flash paper and cotton, shooting a fireball a few feet into the air. You can buy one from most magic shops for around $50, but if you build one on your own, you’ll not only save a few bucks, you’ll also learn how easy it is to add fire effects to almost any electronics project. (And what gadget couldn’t stand a little more spurting flame?) The parts list is minimal but the end effect is pretty fantastic. Hit up the link below for the full build guide, plenty of warnings, and a weekend project that’s sure to impress. How to Own Your Own Website (Even If You Can’t Build One) Pt 3 How to Sync Your Media Across Your Entire House with XBMC How to Own Your Own Website (Even If You Can’t Build One) Pt 2

  Read the article

• Is it possible to generate Events and Hooks in Lua for any game without built-in support?

  - by pr0tocol

  Does a game have to have built-in functions to accept and run lua scripts, or can I design Events and Hooks using Lua on any game I please, akin to the days where C code could be used to hook into the WinAPI using dlls? The reason I ask is, I am trying to create a background application that will perform events and hooks on a particular game that does not currently support lua in-game. Brief examples: Events: - An action executed by the PLAYER is detected. For instance, hitting the Q key will normally make my character use an ability, but with my Lua script running in the background, will cause a sound to play on my computer (or something). Hooks: - An action within the GAME is detected. For instance, the game spawns an enemy every minute. When an enemy spawns, the script will detect this and perform an action, for instance playing a sound locally on the computer. I would like to do both, but I know for games like Garry's Mod, the game already has built-in support for running lua scripts. Is there a way to do either events OR hooks using lua similarly to how C/C++ can connect to a game using WinAPI dlls?

  Read the article

• AMD E-450 APU with HD-6320 graphics produces jerky videos

  - by user80424

  I try to make videos smooth playing on a Lenovo E325 laptop equipped with AMD E-450 APU. This processor have Ati HD-6320 GPU integrated. I installed ATI proprietary driver (Catalyst 12.04) as described here. Everything went fine and got no errors. However I can not play smooth HD videos. Almost every second frame has been dropped in VLC with hardware acceleration enabled. vainfo shows: libva: VA-API version 0.32.0 Xlib: extension "XFree86-DRI" missing on display ":0". libva: va_getDriverName() returns 0 libva: Trying to open /usr/lib/x86_64-linux-gnu/dri/fglrx_drv_video.so libva: va_openDriver() returns 0 vainfo: VA-API version: 0.32 (libva 1.0.15) vainfo: Driver version: Splitted-Desktop Systems XvBA backend for VA-API - 0.7.8 vainfo: Supported profile and entrypoints VAProfileH264High : VAEntrypointVLD VAProfileVC1Advanced : VAEntrypointVLD fglrxinfo says: display: :0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: AMD Radeon HD 6320 Graphics OpenGL version string: 4.2.11631 Compatibility Profile Context and fgl_glxgears produces ~250fps. Why are HD video frames dropped? CPU doesn't goes above 50% during playback.

  Read the article

• Video freezes when larger than a certain size

  - by Poyan

  I have a weird problem playing video files. I have a fairly new (a few years old) graphic card that should and has played up to 1080p video files without much a lot of trouble. I seem to be having a weird issue where the video plays back fine if the window is below a certain size, but as soon as the windowsize increases, the picture freezes. The audio still plays. Usually this is mitigated by killing som applications. Especially GTK (?) apps seem to cause this lag, like having a Nautilus window open usually triggers this error for me. With hardware rendering I get the error regardless of application. I have tried enabling software rendering in VLC and that eliminates the problem (but I get other problems using software rendering, so I've avoided it). I know this is pretty fuzzy, but I'm not sure how to approach this problem. Do you have any idea? EDIT: Some more information. I have the correct and latest drivers installed. My graphics card is a Nvidia 7600 GT.

  Read the article

• Are Windows partitions gone?

  - by Gigili

  I had Windows 7 on my laptop (factory setting), because of some performance issues, I decided to use recovery options to restore it to its factory condition but I don't know what has happened or what I have done that the whole operating system was gone after playing around with recovery options from the boot menu. I couldn't find Windows, so I installed Ubuntu 11.04 on my laptop. Last time I had Ubuntu on it, it was not really compatible with laptop's configuration and I had a bit of problems trying to do normal tasks I used to do on Windows. Now I want to make sure that Windows and its drivers are gone so that I can try to install a newer version of Ubuntu or Windows. I tried the command sudo fdisk -l And the result shown was: myaccount@myaccount-VPCS116FG:~$ sudo fdisk -l [sudo] password for myaccount: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00025b5f Device Boot Start End Blocks Id System /dev/sda1 * 1 38409 308515840 83 Linux /dev/sda2 38409 38914 4052993 5 Extended /dev/sda5 38409 38914 4052992 82 Linux swap / Solaris Disk /dev/dm-0: 4150 MB, 4150263808 bytes 255 heads, 63 sectors/track, 504 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xa668cfe8 Disk /dev/dm-0 doesn't contain a valid partition table Is it gone? If not, what command should I try to have access to Windows partitions? Thank you.

  Read the article

• Disabling monitor reconfiguration when closing lid

  - by Tomas

  I often need to move my laptop from one working place to another. When I do this, there are two events Ubuntu responds to by changing the monitor set up: Removing/attaching the VGA cable Closing/opening the lid of the laptop While removing the VGA cable gives me what I need (single screen, highest native resolution on the external screen if connected; otherwise highest resolution on the laptop), the laptop close/open lid response is not as good. Every time I close or open the lid, Ubuntu reconfigures the monitor set up. When I close the lid now... the screen goes black for a few seconds and it switches to clone, with my laptop screen disabled. Reopening results in... briefly a black screen, then the external monitor being used as desktop extension. Ubuntu thinks too much. My first and foremost question: Is there any way to let Ubuntu ignore lid close events? Ideally (or when there's no way to solve above question) I'd want to change how it deals with the screen reconfiguration. Why does Ubuntu toggle the screen configuration between external, clone and single display? Can't I just configure it to always use the external monitor, when present, in single screen mode? Note that similar questions have been asked before (most notably this one), but these have been closed perhaps wrongly. Any ideas are very welcome, I don't mind playing around a bit to see if something works.

  Read the article

• Ubuntu 12.04 resolution stuck on 640x480

  - by user212483

  I am new to Ubuntu and I was trying to get my HDMI enabled TV to work with my Ubuntu 12.04 computer and I installed a Nvidia driver using the "additional drivers" program. After that didn't work, I started playing around with the dual booted windows 7 on my computer. Now, I've never used that windows since I installed it so I was stripped down to bare minimum so I tried to adjust the resolution(as it was on lowest resolution) and tried to connect the HDMI, which didn't work. After that I came back to my Ubuntu installation only to find out that it is now stuck on 640x480 resolution. I tried to remove the driver that I installed again using the "additional drivers" program but that didn't help at all. The error that showed up was - Could not apply the stored configuration for monitors none of the selected modes were compatible with the possible modes: Trying modes for CRTC 63 CRTC 63: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 0) CRTC 63: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 1) Trying modes for CRTC 64 CRTC 64: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 0) CRTC 64: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 1) Any help would be appreciated as this is very annoying. Thanks

  Read the article

• How can I get my first-person character in Unity to move to a ledge with an animation?

  - by BallzOfSteel

  I'm trying to get this to happen: The character walks up to a large crate, the player presses a button, and an animation starts playing where the character climbs up on to the crate. (all in first person view). So far I tried this with normal "First Person Controller" Prefab in Unity. My code so far: function OnTriggerStay(other : Collider){ if(other.tag == "GrabZone"){ if(Input.GetKeyDown("e")){ animation.Play("JumpToLedge"); } } } However when i use this on The FPC it will always play from the position the animation is created on. I also tried to create an empty game object, placing the FPC in there. Gives same effect. I also tried just animating the graphics of the FPC alone. This seems to work but since the Character Controller itself is not animated that stays onthe ground. So the whole FPC wont work anymore. Is there anyway i could let this animation play on the local position the player is on at that time? Or can you think of any other logical solution for a grab and climb?

  Read the article

• Seperation of drawing and logic in games

  - by BFree

  I'm a developer that's just now starting to mess around with game development. I'm a .Net guy, so I've messed with XNA and am now playing around with Cocos2d for the iPhone. My question really is more general though. Let's say I'm building a simple Pong game. I'd have a Ball class and a Paddle class. Coming from the business world development, my first instinct is to not have any drawing or input handling code in either of these classes. //pseudo code class Ball { Vector2D position; Vector2D velocity; Color color; void Move(){} } Nothing in the ball class handles input, or deals with drawing. I'd then have another class, my Game class, or my Scene.m (in Cocos2D) which would new up the Ball, and during the game loop, it would manipulate the ball as needed. The thing is though, in many tutorials for both XNA and Cocos2D, I see a pattern like this: //pseudo code class Ball : SomeUpdatableComponent { Vector2D position; Vector2D velocity; Color color; void Update(){} void Draw(){} void HandleInput(){} } My question is, is this right? Is this the pattern that people use in game development? It somehow goes against everything I'm used to, to have my Ball class do everything. Furthermore, in this second example, where my Ball knows how to move around, how would I handle collision detection with the Paddle? Would the Ball need to have knowledge of the Paddle? In my first example, the Game class would have references to both the Ball and the Paddle, and then ship both of those off to some CollisionDetection manager or something, but how do I deal with the complexity of various components, if each individual component does everything themselves? (I hope I'm making sense.....)

  Read the article

• send music to upnp device from PC

  - by markrich

  I have a new Arcam AirDAC (http://www.arcam.co.uk/products,rSer...ACs,airDAC.htm) attached to my stereo which has upnp support. I would like to send audio from my 14.04 PC to the box itself and to this end installed Rygel upon my system to help but it hasn't. I have created a new sound device in PulseAudioPreferences and selected it from inidcator-sound-switcher but here I become stuck. The sound is heading to the new sound device as the volume can be seen to go up and down from PulseAudioVolumeControl but no sound comes from the stereo downstairs. The problem, as I see it, is the new device has no idea where to send the music as the Arcam hasn't been chosen from any program. So - I installed BubbleUPNP and Plex. My music has been imported into the later and the former can see both the Arcam as a Renderer and the Plex as the Media Server. Installing the BubbleUPNP program on my Android tablet allowed me to send music and all seemed good UNTIL I started playing AIFF and ALAC music and it all stopped. No suitable decoding device. So that scuppered that route. So here I am and stuck. How can I tell Ubuntu to use the Arcam as a renderer to play music through when the albums are played from Rhytmnbox, Tomahawk, Clementine or other? Clementine would be my preferred client as there is a usable remote control program for the tablet. Can anyone help me fix this or advice another way to do what I would like?

  Read the article

• How do I simplify a 2D game grid for level management while keeping its by-pixel features?

  - by Eric Thoma

  (I cross-posted this from StackOverflow as this seems to be a more appropriate forum. I've looked around a little here and I did not find an answer, so I hope this is not a recurring question.) This is a question dealing with 2D world design. I am playing around by creating a 2D bird's eye view shooter game, and I am looking to make the game sleek and advanced. I hope to be able to write physics so projectiles have momentum and knock-down properties. I am immediately running into the problem of world design. I need a way to have level files that store everything there is about a game. This is easiest by just having a grid of objects. But there are thin-walls and other objects that don't seem to fit into a traditional cell of a grid. I want to be able to fit all these together so I can streamline level design; so I don't have to put in the exact pixel-specific start and end of a wall. There doesn't seem to be an obvious translation from level file to game without forcing myself into a pacman-life scenario, meaning a scenario where the game feels boxy and discrete. There is a contrast between the smoothly (relatively) moving characters and finite jumps in a grid. I would appreciate an answer that would describe implementation options or point me to resources that do. I would also appreciate references to sites that teach game design. The language I am using is Java (although I would love to use C or C++, but I can never find convenient resources in those languages). Thank you for any answers. Please leave any questions in the space below; I will be able to answer them later tonight (28th Nov).

  Read the article

• Finding the best practice for a game simulating tool

  - by Tougheart

  I'm studying Java right now, and I'm thinking of this tool as my practice project. The game is "League of Legends" in case anyone knows it, I'm not actually simulating the game as in simulating game play, I'm just trying to create a tool that can compare different champions to each other based on their own abilities and items bought inside the game. The game basics are: Every player has a champion in a team of 5 players playing against another team. Each champion has a different set of abilities (usually 4) that s/he uses to do damage to opposing champions. Each champion gets stronger by buying different items, increasing the attack it deals or decreasing the damage received. What I want to do is to create a tool to be used outside the game enabling players to try out different builds for their champions and compare the figures against other champions they usually fight against. The goal is to enable players get a deeper understanding of the different item combinations (builds) that can be used during the games, instead of trying them out in real games which can be somehow very time consuming. What I'm stuck at is the best practice I should follow to make this possible using Java, I can't figure out which classes should inherit from which, should I make champions and items specs in the code or extracted from other files, specially that I'm talking about hundreds of items and champions to use in that tool. I'm self studying Java, and I don't have much practice at it, so I would really appreciate any broad guidelines regarding this, and sorry if my question doesn't fit here, I tried to follow the rules. English isn't my native language, so I'm really sorry if I wasn't clear enough, I would be more than happy to explain anything that's not understood.

  Read the article

• Is there any kind of established architecture for browser based MMO games?

  - by black_puppydog

  I am beginning the development of a broser based game in which players take certain actions at any point in time. Big parts of gameplay will be happening in real life and just have to be entered into the system. I believe a good kind of comparison might be a platform for managing fantasy football, although I have virtually no experience playing that, so please correct me if I am mistaken here. The point is that some events happen in the program (i.e. on the server, out of reach for the players) like pulling new results from some datasource, starting of a new round by a game master and such. Other events happen in real life (two players closing a deal on the transfer of some team member or whatnot - again: have never played fantasy football) and have to be entered into the system. The first part is pretty easy since the game masters will be "staff" and thus can be trusted to a certain degree to not mess with the system. But the second part bothers me quite a lot, especially since the actions may involve multiple steps and interactions with different players, like registering a deal with the system that then has to be approved by the other party or denied and passed on to a game master to decide. I would of course like to separate the game logic as far as possible from the presentation and basic form validation but am unsure how to do this in a clean fashion. Of course I could (and will) put some effort into making my own architectural decisions and prototype different ideas. But I am bound to make some stupid mistakes at some point, so I would like to avoid some of that by getting a little "book smart" beforehand. So the question is: Is there any kind of architectural works that I can read up on? Papers, blogs, maybe design documents or even source code? Writing this down this seems more like a business application with business rules, workflows and such... Any good entry points for that?

  Read the article

• not being able to access any sudo function on my pc

  - by explorex

  Hi, I am not being to access any functions in my desktop and I don't have an OS besides Ubuntu 10.04 Lucid Linux and I am new to ubuntu. I think I rebooted my computer thinking that Google Chrome crashed. I opened Google Chrome but it showed opening message but never opened so I restarted my computer. and when my system was loading ('i was playing with keyboard dont know what I typed') and when by ubutnu loaded, I was unable to access anything some of characteristics are listed below I cannot hear any sound I cannot access wired ethernet connection on the right corner where I usually enable to access interne and I have no internet. There is no local apache server either. when ever I try to start apacer I get setuid must be root or something. When I type sudo then I get message setuid must be root. I cannot access orther external storage devices like pendrive and portable hard drive and cannot mount my other drives with FAT32 filesystem. When I try to start my apache webserver with out typing sudo then I get message cannnot open socket or something like it. EDIT:: i remember also doing command chown -R www-data / earlier and got error message EDIT:: and i cannot shutdown my computer, it only logs off

  Read the article

• How to debug a fatal system crash - [graphical loop DOTA2]?

  - by Huw

  Whilst playing DOTA2, I occasionally and apparently randomly seem to be experiencing a fatal crash where the display freezes fixed and the audio loops over approx the last .5 of a second. Now, I'm interested in resolving this - but my trouble is I don't know where to start. The error appears non-reproducible (I've tried returning to games and deploying the same combination of events in hopes of pinning to to a certain shader etc), and I don't know which part of 'the stack' it might be coming from. Variables that occur to me: I custom build this system, did I do something wrong - is my PSU not providing enough power to the graphics card? I am running Steam and DOTA under Linux, could this new software have a bug Might it be something to do with my ATI Catalyst graphics drivers Is some other background process interfering I'm usually mid game when this occurs, so i quickly kill the power and reboot (when i'm lucky i can get back in with only 1-2 mins lost!). So my question here relates to logs. Where should I start to look or how might I set up logs to help me pin down a fatal crash of this kind by recording moments up to / before a crash and is this likely to be something I should push Steam to do, or is there something at a system level? Then perhaps I can return with a more specific question and perhaps even a bug report :) Many thanks in advance.

  Read the article

• Dealing with numerous, simultaneous sounds in unity

  - by luxchar

  I've written a custom class that creates a fixed number of audio sources. When a new sound is played, it goes through the class, which creates a queue of sounds that will be played during that frame. The sounds that are closer to the camera are given preference. If new sounds arrive in the next frame, I have a complex set of rules that determines how to replace the old ones. Ideally, "big" or "important" sounds should not be replaced by small ones. Sound replacement is necessary since the game can be fast-paced at times, and should try to play new sounds by replacing old ones. Otherwise, there can be "silent" moments when an old sound is about to stop playing and isn't replaced right away by a new sound. The drawback of replacing old sounds right away is that there is a harsh transition from the old sound clip to the new one. But I wonder if I could just remove that management logic altogether, and create audio sources on the fly for new sounds. I could give "important" sounds more priority (closer to 0 in the corresponding property) as opposed to less important ones, and let Unity take care of culling out sound effects that exceed the channel limit. The only drawback is that it requires many heap allocations. I wonder what strategy people use here?

  Read the article

• Ubuntu 12.10 won't display properly after kernel upgrade

  - by Daniel

  After updating a system today, Ubuntu's doesn't display correctly. The desktop now looks like this. It was working properly before. I had to use the terminal to run synaptic package manager, so I could view the update history; which is as follows: Commit Log for Wed Nov 7 11:50:36 2012 Upgraded the following packages: linux-image-generic (3.5.0.17.19) to 3.5.0.18.21 Installed the following packages: linux-image-3.5.0-18-generic (3.5.0-18.29) linux-image-extra-3.5.0-18-generic (3.5.0-18.29) Prior to this issue, the last active driver was nvidia-current-updates, version 304.51. I tried using the nvidia-current driver, version 304.51.really.304.43 instead, but the problem persists. I tried running nvidia-settings from terminal, so I could try configuring something, but the application informs that the Nvidia driver is not being used. As the x-swat repository has nothing for Quantal, I desperately used the unstable x-edgers repository & upgraded, but to no avail; so I purged it. The display should normally be full HD, but the only available resolutions now are 1024x768(4:3) and 800x600(4:3). The system is Dell XPS-L702X, with NVIDIA GeForce GT 555M, and 17" screen. How can I fix this problem? Update: I tried using the Nouveau third-party driver & this fixes the issue. However, if you have any idea how to get the Nvidia drivers working properly with the latest kernel, please share; as I've noticed some videos playing very slowly on the system, though I'm not sure exactly why.

  Read the article

• Dynamic quadrees

  - by paul424

  recently I come out writing Quadtree for creatures culling in Opendungeons game. Thing is those are moving points and bounding hierarchy will quickly get lost if the quadtree is not rebuild very often. I have several variants, first is to upgrade the leaf position , every time creature move is requested. ( note if I would need collision detection anyway, so this might be necessery anyway). Second would be making leafs enough large , that the creature would sure stay inside it's bounding box ( due to its speed limit). The partition of a plane in quadtree is always fixed ( modulo the hierarchical unions of some parts) . For creatures close to the center of the plane , there would be no way of keeping it but inside one big leaf, besides this brokes the invariant that each point can be put into any small area as desired. So on the second thought could I use several quadrees ? Each would have its "coordinate axis XY" somwhere shifted ? Before I start playing with this maybe some other space diving structure would suit me better, unfortunetly wiki does not compare it's execution time : http://en.wikipedia.org/wiki/Grid_%28spatial_index%29#See_also

  Read the article

< Previous Page | 125 126 127 128 129 130 131 132 133 134 135 136  | Next Page >