design problem - Page 1315

I can't update my system properly, "no package header" error

- by joel

Every time I try to run sudo apt-get update or try running updates from the GUI interface I run into the following problem or something similar: Reading package lists... Error! E: Encountered a section with no Package: header E: Problem with MergeList /var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_precise_restricted_binary-i386_Packages E: The package lists or status file could not be parsed or opened. I've tried purging using sudo rm -rf <filename> where <filename> is the listed file above, and then running sudo apt-get update to fix it (as listed elsewhere in this forum) and no luck, just keep getting this message. I'm running Ubuntu 12.04 and this is getting really frustrating... I just want a system that runs smoothly and doesn't require it's hand to be held when it comes to updates. Tried the solutions posted below and am still receiving the same errors, sample output: W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise_main_binary-amd64_Packages Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise_main_binary-i386_Packages Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise_restricted_binary-i386_Packages Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise_universe_binary-i386_Packages Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise_multiverse_binary-i386_Packages Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise-updates_universe_source_Sources Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise-updates_restricted_binary-i386_Packages Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise-updates_universe_binary-i386_Packages Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise-updates_multiverse_binary-i386_Packages Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise-backports_universe_binary-i386_Packages Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise-security_main_source_Sources Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise-security_universe_binary-amd64_Packages Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise-security_main_binary-i386_Packages Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise-security_universe_binary-i386_Packages Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise_main_i18n_Translation-en%5fCA Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise-updates_main_i18n_Translation-en%5fCA Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise-updates_main_i18n_Translation-en Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise-updates_multiverse_i18n_Translation-en%5fCA Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise-updates_universe_i18n_Translation-en%5fCA Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise-backports_main_i18n_Translation-en%5fCA Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise-backports_multiverse_i18n_Translation-en%5fCA Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise-backports_universe_i18n_Translation-en%5fCA Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise-security_main_i18n_Translation-en%5fCA Encountered a section with no Package: header W: Failed to fetch gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise-security_multiverse_i18n_Translation-en%5fCA Encountered a section with no Package: header E: Some index files failed to download. They have been ignored, or old ones used instead.

Read the article

MySQL Connect 8 Days Away - Replication Sessions

- by Mat Keep

Following on from my post about MySQL Cluster sessions at the forthcoming Connect conference, its now the turn of MySQL Replication - another technology at the heart of scaling and high availability for MySQL. Unless you've only just returned from a 6-month alien abduction, you will know that MySQL 5.6 includes the largest set of replication enhancements ever packaged into a single new release: - Global Transaction IDs + HA utilities for self-healing cluster..(yes both automatic failover and manual switchover available!) - Crash-safe slaves and binlog - Binlog Group Commit and Multi-Threaded Slaves for high performance - Replication Event Checksums and Time-Delayed replication - and many more There are a number of sessions dedicated to learn more about these important new enhancements, delivered by the same engineers who developed them. Here is a summary Saturday 29th, 13.00 Replication Tips and Tricks, Mats Kindahl In this session, the developers of MySQL Replication present a bag of useful tips and tricks related to the MySQL 5.5 GA and MySQL 5.6 development milestone releases, including multisource replication, using logs for auditing, handling filtering, examining the binary log, using relay slaves, splitting the replication stream, and handling failover. Saturday 29th, 17.30 Enabling the New Generation of Web and Cloud Services with MySQL 5.6 Replication, Lars Thalmann This session showcases the new replication features, including • High performance (group commit, multithreaded slave) • High availability (crash-safe slaves, failover utilities) • Flexibility and usability (global transaction identifiers, annotated row-based replication [RBR]) • Data integrity (event checksums) Saturday 29th, 1900 MySQL Replication Birds of a Feather In this session, the MySQL Replication engineers discuss all the goodies, including global transaction identifiers (GTIDs) with autofailover; multithreaded, crash-safe slaves; checksums; and more. The team discusses the design behind these enhancements and how to get started with them. You will get the opportunity to present your feedback on how these can be further enhanced and can share any additional replication requirements you have to further scale your critical MySQL-based workloads. Sunday 30th, 10.15 Hands-On Lab, MySQL Replication, Luis Soares and Sven Sandberg But how do you get started, how does it work, and what are the best practices and tools? During this hands-on lab, you will learn how to get started with replication, how it works, architecture, replication prerequisites, setting up a simple topology, and advanced replication configurations. The session also covers some of the new features in the MySQL 5.6 development milestone releases. Sunday 30th, 13.15 Hands-On Lab, MySQL Utilities, Chuck Bell Would you like to learn how to more effectively manage a host of MySQL servers and manage high-availability features such as replication? This hands-on lab addresses these areas and more. Participants will get familiar with all of the MySQL utilities, using each of them with a variety of options to configure and manage MySQL servers. Sunday 30th, 14.45 Eliminating Downtime with MySQL Replication, Luis Soares The presentation takes a deep dive into new replication features such as global transaction identifiers and crash-safe slaves. It also showcases a range of Python utilities that, combined with the Release 5.6 feature set, results in a self-healing data infrastructure. By the end of the session, attendees will be familiar with the new high-availability features in the whole MySQL 5.6 release and how to make use of them to protect and grow their business. Sunday 30th, 17.45 Scaling for the Web and the Cloud with MySQL Replication, Luis Soares In a Replication topology, high performance directly translates into improving read consistency from slaves and reducing the risk of data loss if a master fails. MySQL 5.6 introduces several new replication features to enhance performance. In this session, you will learn about these new features, how they work, and how you can leverage them in your applications. In addition, you will learn about some other best practices that can be used to improve performance. So how can you make sure you don't miss out - the good news is that registration is still open ;-) And just to whet your appetite, listen to the On-Demand webinar that presents an overview of MySQL 5.6 Replication.

Read the article

OBIEE 11.1.1 - Introduction to OBIEE 11g Full Sample App

- by user809526

Isn't it nice to discover OBIEE 11g around a nice "How To" catalog of features? to observe OBI and Essbase relationships at work? to discover TimesTen? The OBIEE 11g Full Sample App (FSA) is a comprehensive collection of examples designed to demonstrate the latest Oracle BIEE 11g capabilities and design best practices: Enhanced visualizations as Geo-spacial maps and interactive dashboards, Action Framework, BI Publisher, Scorecard and Strategy Management, Mobile style sheets, Semantic layer modeling, Multi-source federation, Integration with products such as Essbase, Oracle OLAP, ODM, TimesTen, ODI and more The FSA is intended to be comprehensive, it is big (see CAVEAT below). The FSA is not an Oracle product, it is a good will free deployment of OBIEE/Essbase designed to exemplify OBIEE features, infrastructure and security around the Fusion Middleware components. Its contents and code are distributed free for demonstrative purposes only. It is neither maintained nor supported by Oracle as a licensed product. The OBIEE Full Sample App is independent of the default Sample App that comes with the OBIEE product. BENEFITS The FSA helps as a demonstrator of OBIEE 11g best practices, a tutorial, an environment "Test & Scrap", a SR bench (regression, conflicts), a tuning bench, a quick ready made POC seed for projects, a security options environment, ... The FSA - Is organized around a catalog of functional features - Has been deployed over 1000 times, it should be stable RELEASE The Full Sample App (V107) is bound to OBIEE 11.1.1.5 and Essbase 11.1.2.1 (November 2011). The FSA release dates are independent of the Product GA date (OBIEE). In early December 2011, a new functional Patch (V110) is released. It is easily applied (in less than 15 mins) on top of OBIEE SampleApp 11.1.1.5 (V107). The patch (V110) includes additional functional examples: 1. Web Catalog Statistics Application: Provides detailed insight into your web catalog content, dormant catalog objects, webcat impact analysis for metadata changes and more 2. Data inflation Scripts: A set of simple SQL procedures to quickly inflate SampleApp Fact and Dimension data to millions of records in a few minutes 3. Public Content Extensions Framework: A patching framework for public examples and contributions leveraging SampleApp 4. Additional report examples (including bridge report, external chart integrations) and bug fixes DISTRIBUTION as VBox image (November 2011) The ready made VBox image is designed to run on Virtual Box. It can be converted to VMware (see another BLOG). 1/ http://www.oracle.com/technetwork/middleware/bi-foundation/obiee-samples-167534.html VBox Image Deployment Guide Sampleapp_v107_GA.ovf - VBox image key file The above http URL provides the user:password for the ftp URLs below. 2/ ftp://user:[email protected]/static/SampleAppV107/ 12 "7-zip" files Sampleapp_v107_GA_7_20.7z.001 -> .012 We recommend 7-zip file manager for unzipping (http://www.7-zip.org/). Select Unzip here option, it will create the contents under a directory named "SampleApp_10722". On Windows, it is important to download and save zip file under the root directory (e.g. C:\ or D:\) because of possible long pathnames. 3/ ftp://user:[email protected]/static/SampleAppV107/Unzipped_Version/ 4 files Sampleapp_v107_GA-disk[1234].vmdk Important note: Check the provided checksums (md5sum). Please do it! DISTRIBUTION as Installation files for existing OBI 11.1.1.5 (November 2011) http://www.oracle.com/technetwork/middleware/bi-foundation/obiee-samples-167534.html Install files Deployment Guide SampleApp_10722_1.zip - 198 MB CAVEAT Many computers have RAM chips problems that keep often silent ... until you manipulate big files. It is strongly advised you run some memory check program eg MEMTEST in GRUB boot manager. Running md5sum repeatedly onto the very same big file must be consistent [same result], else a hardware memory problem is suspected. For Virtual Box, you should most likely enable VT-X (Vanderpool) hardware virtualization in BIOS. A free disk space of 80 GB is required to perform safely the VBox image installation. A Virtual Machine of minimum 6 to 7 GB memory fits the needs of combining OBIEE and Essbase execution.

Read the article

ASP.NET Server-side comments

- by nmarun

I believe a good number of you know about Server-side commenting. This blog is just like a revival to refresh your memories. When you write comments in your .aspx/.ascx files, people usually write them as: 1:  To show that it actually makes a difference for using the server-side commenting technique, I’ve started a web application project and my default.aspx page looks like this: 1: <%@ Page Title="Home Page" Language="C#" MasterPageFile="~/Site.master" AutoEventWireup="true" CodeBehind="Default.aspx.cs" Inherits="ServerSideComment._Default" %> 2: <asp:Content ID="HeaderContent" runat="server" ContentPlaceHolderID="HeadContent"> 3: </asp:Content> 4: <asp:Content ID="BodyContent" runat="server" ContentPlaceHolderID="MainContent"> 5: <h2> 6:  7: Welcome to ASP.NET! 8: </h2> 9: <p> 10: To learn more about ASP.NET visit <a href="http://www.asp.net" title="ASP.NET Website">www.asp.net</a>. 11: </p> 12: <p> 13: You can also find <a href="http://go.microsoft.com/fwlink/?LinkID=152368&clcid=0x409" 14: title="MSDN ASP.NET Docs">documentation on ASP.NET at MSDN</a>. 15: </p> 16: </asp:Content> See the comment in line 6 and when I run the app, I can do a view source on the browser which shows up as: 1: <h2> 2:  3: Welcome to ASP.NET! 4: </h2> Using Fiddler shows the page size as: Let’s change the comment style and use server-side commenting technique. 1: <h2> 2: <%-- This is a comment --%> 3: Welcome to ASP.NET! 4: </h2> Upon rendering, the view source looks like: 1: <h2> 2: 3: Welcome to ASP.NET! 4: </h2> Fiddler now shows the page size as: The difference is that client-side comments are ignored by the browser, but they are still sent down the pipe. With server-side comments, the compiler ignores everything inside this block. Visual Studio’s Text Editor toolbar also puts comments as server-side ones. If you want to give it a shot, go to your design page and press Ctrl+K, Ctrl+C on some selected text and you’ll see it commented in the server-side commenting style.

Read the article

JustMock and Moles – A short overview for TDD alpha geeks

- by RoyOsherove

People have been lurking near my house, asking me to write something about Moles and JustMock, so I’ll try to be as objective as possible, taking in the fact that I work at Typemock. If I were NOT working at Typemock I’d write: JustMock JustMock tries to be Typemock at so many levels it’s not even funny. Technically they work the same and the API almost looks like it’s a search and replace work based on the Isolator API (awesome compliment!), but JustMock still has too many growing pains and bugs to be usable. Also, JustMock is missing alot of the legacy abilities such as Non public faking, faking all types and various other things that are really needed in real legacy code. Biggest thing (in terms of isolation integration) is that it does not integrate with other profilers such as coverage, NCover etc.) When JustMock comes out of beta, I feel that it should cost about half as Isolator costs, as it currently provides about half the abilities. Moles Moles is an addon of Pex and was originally only intended to work within the Pex environment. It started as a research project and now it’s a power-tool for VS (so it’s a separate install) Now it’s it’s own little stubbing framework. It’s not really an Isolation framework in the classic sense, because it does not provide any kind of API built in to verify object interactions. You have to use manual flags all on your own to do that. It generates two types of classes per assembly: Manual Stubs(just like you’d hand code them) and Mole classes. Each Mole class is a special API to change and break the behavior that the corresponding type. so MDateTime is how you change behavior for DateTime. In that sense the API is al over the place, and it can become highly unreadable and unmentionable over time in your test. Also, the Moles API isn’t really designed to deal with real Legacy code. It only deals with public types and methods. anything internal or private is ignored and you can’t change its behavior. You also can’t control static constructors. That takes about 95% of legacy scenarios out of the picture if that’s what you’re trying to use it for. Personally, I found it hard to get used to the idea of two parallel APIs for different abilities, and when to choose which. and I know this stuff. I would expect more usability from the API to make it more widely used. I don’t think that Moles in planning to go that route. Publishing it as an Isolation framework is really an afterthought of a tool that was design with a specific task in mind, and generic Isolation isn’t it. it’s only hope is DEQ – a simple code example that shows a simple Isolation API built on the Moles generic engine. Moles can and should be used for very simple cases of detouring functionality such a simple static methods or interfaces and virtual functions (like rhinomock and MOQ do). Oh, Wait. Ah, good thing I work at Typemock. I won’t write all that. I’ll just write: JustMock and Moles are great tools that enlarge the market space for isolation related technologies, and they prove that the idea of productivity and unit testing can go hand in hand and get people hooked. I look forward to compete with them at this growing market.

Read the article

gnome3 and unity bug in 11.10

- by LinuxNoob

Yes I am new to Linux but am learning stuff daily as I finally migrated my work systems to Ubuntu 11.10 and they works pretty decent given the fact that some of the application I have to use to do my job are not supported by Linux ... yet. Anyways, I was working with Unity, not even knowing there was a Gnome3 environment until I ran across a post while searching for a fix on another unrelated issue. Lo and behold, I was able after much searching to log in Gnome 3 after installing the required packages. I don't know how many articles I had to read for someone to tell me how to log into Gnome3 or into Unity by selecting the little wheel on the login screen to get the drop down for the different environments ...(I know... I'm such a Noob but I'm sure we all were at one time or another). Again, after using Unity, I was hooked on Linux and decided if I can get it to work with all the Apps I need at work and play a little WOW every now and again, I'm good to go. But again to the point. I logged into Gnome3. No icons but just a cool experience to see what the heck this thing does. I eventually figured out how to use it and I love Gnome 3 but it is as buggy as the C++ programs I first learned to write in college. I don't know if it's because i installed the packages after I was up and running in Unity or what. The issues I have are that it locks the desktop up randomly..just locks it up. Usually when i have a lot of screens opened. Never fails that it does it when i put the mouse up in the top/left corner to swap Apps. Then I can't get to the windows in the back to shut them down. A few times i just have to turn the power off on my PC ( sigh, what a POS I say to myself every time I decide "oh it was an isolated incidence"...try it again..it's so cool and designed the way I would design a desktop .. intuitive...just cool man cool) but it fails me again and again. If I had to guess I would say it's a memory problem..i do have 2gigs but nevertheless it just stops working. The mouse doesn't respond ...eventually the keyboard doesn't respond. Just the Power Off button is the only way out. Never had an issue like this in Unity. Using the same Apps in the same way and I bet the system will crash in 45 minutes to an hour. Usually, I have 7-10 windows opened. I wish I knew enough to get the correct logs, I'm sure it's a bug. I'm not doing anything fancy..just running email, word docs, jave apps, vpn, pidgin, maybe some SQL stuff or communication Apps, etc. Anyways I've decided to wait for another major release to try it again... until then I'm sticking with Unity which is also very cool.

Read the article

How to remove the Mint stuff from my system after installing MATE desktop using MINT repository

- by tinuz

I installed the MATE desktop using this manual http://www.unixmen.com/linux-tutorials/linux-distributions/linux-distributions4-ubuntu/1975-install-linuxmint12-extensions-mate-a-mgse-in-ubuntu-1110- but now i can't open my Ubuntu Software Center and can't open the settings from the update manager. I removed mate desktop but it doesn't fix the problem, i also reinstalled the software center, software-properties-gtk and software-properties-common using: sudo apt-get update; sudo apt-get --purge --reinstall install software-center software-properties-common software-properties-gtk. But when using this line i get the following error: Reading package lists... Done Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 3 reinstalled, 0 to remove and 0 not upgraded. Need to get 0 B/735 kB of archives. After this operation, 0 B of additional disk space will be used. (Reading database ... 304824 files and directories currently installed.) Preparing to replace software-center 5.0.2 (using .../software-center_5.0.2_all.deb) ... Unpacking replacement software-center ... Preparing to replace software-properties-common 0.81.13.1 (using .../software-properties-common_0.81.13.1_all.deb) ... Unpacking replacement software-properties-common ... Preparing to replace software-properties-gtk 0.81.13.1 (using .../software-properties-gtk_0.81.13.1_all.deb) ... Unpacking replacement software-properties-gtk ... Processing triggers for desktop-file-utils ... Processing triggers for gnome-menus ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for hicolor-icon-theme ... Processing triggers for man-db ... Processing triggers for shared-mime-info ... Unknown media type in type 'all/all' Unknown media type in type 'all/allfiles' Unknown media type in type 'uri/mms' Unknown media type in type 'uri/mmst' Unknown media type in type 'uri/mmsu' Unknown media type in type 'uri/pnm' Unknown media type in type 'uri/rtspt' Unknown media type in type 'uri/rtspu' Unknown media type in type 'interface/x-winamp-skin' Setting up software-center (5.0.2) ... Traceback (most recent call last): File "/usr/sbin/update-software-center", line 38, in <module> from softwarecenter.db.update import rebuild_database File "/usr/share/software-center/softwarecenter/db/update.py", line 59, in <module> from softwarecenter.db.database import parse_axi_values_file File "/usr/share/software-center/softwarecenter/db/database.py", line 26, in <module> from softwarecenter.db.application import Application File "/usr/share/software-center/softwarecenter/db/application.py", line 25, in <module> from softwarecenter.backend.channel import is_channel_available File "/usr/share/software-center/softwarecenter/backend/channel.py", line 25, in <module> from softwarecenter.distro import get_distro File "/usr/share/software-center/softwarecenter/distro/__init__.py", line 165, in <module> distro_instance=_get_distro() File "/usr/share/software-center/softwarecenter/distro/__init__.py", line 148, in _get_distro module = __import__(distro_id, globals(), locals(), [], -1) ImportError: No module named LinuxMint Setting up software-properties-common (0.81.13.1) ... Setting up software-properties-gtk (0.81.13.1) ... $ Is there a way to fix this problem without having to reinstall Ubuntu 11.10?? thanks in advance tinuz

Read the article

Agile Database Techniques: Effective Strategies for the Agile Software Developer – book review

- by DigiMortal

Agile development expects mind shift and developers are not the only ones who must be agile. Every chain is as strong as it’s weakest link and same goes also for development teams. Agile Database Techniques: Effective Strategies for the Agile Software Developer by Scott W. Ambler is book that calls also data professionals to be part of agile development. Often are DBA-s in situation where they are not part of application development and later they have to survive large set of applications that all use databases different way. Of course, only some of these applications are not problematic when looking what database server has to do to serve them. I have seen many applications that rape database servers because developers have no clue what is going on in database (~3K queries to database per web application request – have you seen something like this? I have…) Agile Database Techniques covers some object and database design technologies and gives suggestions to development teams about topics they need help or assistance by DBA-s. The book is also good reading for DBA-s who usually are not very strong in object technologies. You can take this book as bridge between these two worlds. I think teams that build object applications that use databases should buy this book and try at least one or two projects out with Ambler’s suggestions. Table of contents Foreword by Jon Kern. Foreword by Douglas K. Barry. Acknowledgments. Introduction. About the Author. Part One: Setting the Foundation. Chapter 1: The Agile Data Method. Chapter 2: From Use Cases to Databases — Real-World UML. Chapter 3: Data Modeling 101. Chapter 4: Data Normalization. Chapter 5: Class Normalization. Chapter 6: Relational Database Technology, Like It or Not. Chapter 7: The Object-Relational Impedance Mismatch. Chapter 8: Legacy Databases — Everything You Need to Know But Are Afraid to Deal With. Part Two: Evolutionary Database Development. Chapter 9: Vive L’ Évolution. Chapter 10: Agile Model-Driven Development (AMDD). Chapter 11: Test-Driven Development (TDD). Chapter 12: Database Refactoring. Chapter 13: Database Encapsulation Strategies. Chapter 14: Mapping Objects to Relational Databases. Chapter 15: Performance Tuning. Chapter 16: Tools for Evolutionary Database Development. Part Three: Practical Data-Oriented Development Techniques. Chapter 17: Implementing Concurrency Control. Chapter 18: Finding Objects in Relational Databases. Chapter 19: Implementing Referential Integrity and Shared Business Logic. Chapter 20: Implementing Security Access Control. Chapter 21: Implementing Reports. Chapter 22: Realistic XML. Part Four: Adopting Agile Database Techniques. Chapter 23: How You Can Become Agile. Chapter 24: Bringing Agility into Your Organization. Appendix: Database Refactoring Catalog. References and Suggested Reading. Index.

Read the article

Easily Add Facebook Chat to Pidgin

- by Matthew Guay

Want to keep in touch with your Facebook friends throughout the day? Here we’ll show you how to easily add Facebook chat to the popular multi-protocol chat client Pidgin. Facebook has recently added support for XMPP chat, which means you can easily add it to popular chat clients such as Pidgin. Previously you could only add Facebook chat to Pidgin through a plug-in that didn’t always work correctly. Here we’ll walk you through setting up your Facebook account in Pidgin. Getting Started First, make sure you have a username for your Facebook account (link below). This is a relatively new feature for Facebook, so if you’ve had your account for a while you may need to choose one. If you already have one, you should see it listed instead. Now, open Pidgin, and click Manage Accounts. Click Add… Then select XMPP from the Protocol list. Now, enter your Facebook username without the facebook.com part (e.g your.facebook.username, not http://www.facebook.com/your.user.name). Then, enter chat.facebook.com for the Domain, and enter your standard Facebook password. You can check the “Remember password” box if you’d like Pidgin to automatically sign in to Facebook chat. Now, click on the Advanced tab, and uncheck the “Require SSL/TLS” box. Also, make sure the Connect port is 5222. Click Add, and your Facebook account is added to Pidgin. Now Facebook will show up in your list of accounts, with the username [email protected]. Your Facebook friends will show up directly in your Buddy list, complete with their full name and Facebook profile picture. Any users that are not in a group will show under your standard list, while ones in a Facebook group will be shown in a separate group. You can move which groups your Facebook friends show up in, just like you can with other chat contacts. And no matter if your friend is logged in on the standard Facebook website or through another chat application, it will work the same as always. This is a great way to keep in touch with your Facebook friends throughout the day. If you like Facebook chat and already use Pidgin, now you can keep from switching between programs and just chat with all your friends from a central location. Links: Download Pidgin Set your Facebook username Similar Articles Productive Geek Tips The How-To Geek is No Longer on FacebookWin a Free iPod Touch in the How-To Geek Facebook Giveaway!Block Those Irritating Facebook Quiz & Application MessagesPut Your Pidgin Buddy List into the Windows Vista SidebarHow to Lock Down Your Facebook Account TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet How to Find Your Mac Address Use My TextTools to Edit and Organize Text

Read the article

Collation errors in business

- by Rob Farley

At the PASS Summit last month, I did a set (Lightning Talk) about collation, and in particular, the difference between the “English” spoken by people from the US, Australia and the UK. One of the examples I gave was that in the US drivers might stop for gas, whereas in Australia, they just open the window a little. This is what’s known as a paraprosdokian, where you suddenly realise you misunderstood the first part of the sentence, based on what was said in the second. My current favourite is Emo Phillip’s line “I like to play chess with old men in the park, but it can be hard to find thirty-two of them.” Essentially, this a collation error, one that good comedians can get mileage from. Unfortunately, collation is at its worst when we have a computer comparing two things in different collations. They might look the same, and sound the same, but if one of the things is in SQL English, and the other one is in Windows English, the poor database server (with no sense of humour) will get suspicious of developers (who all have senses of humour, obviously), and declare a collation error, worried that it might not realise some nuance of the language. One example is the common scenario of a case-sensitive collation and a case-insensitive one. One may think that “Rob” and “rob” are the same, but the other might not. Clearly one of them is my name, and the other is a verb which means to steal (people called “Nick” have the same problem, of course), but I have no idea whether “Rob” and “rob” should be considered the same or not – it depends on the collation. I told a lie before – collation isn’t at its worst in the computer world, because the computer has the sense to complain about the collation issue. People don’t. People will say something, with their own understanding of what they mean. Other people will listen, and apply their own collation to it. I remember when someone was asking me about a situation which had annoyed me. They asked if I was ‘pissed’, and I said yes. I meant that I was annoyed, but they were asking if I’d been drinking. It took a moment for us to realise the misunderstanding. In business, the problem is escalated. A business user may explain something in a particular way, using terminology that they understand, but using words that mean something else to a technical person. I remember a situation with a checkbox on a form (back in VB6 days from memory). It was used to indicate that something was approved, and indicated whether a particular database field should store True or False – nothing more. However, the client understood it to mean that an entire workflow system would be implemented, with different users have permission to approve items and more. The project manager I’d just taken over from clearly hadn’t appreciated that, and I faced a situation of explaining the misunderstanding to the client. Lots of fun... Collation errors aren’t just a database setting that you can ignore. You need to remember that Americans speak a different type of English to Aussies and Poms, and techies speak a different language to their clients.

Read the article

Silverlight Cream for March 25, 2010 -- #820

- by Dave Campbell

In this Issue: René Schulte, Jeremy Likness, Hassan, Victor Gaudioso, SilverLaw, Mike Taulty, Phani Raj, Tim Heuer, Christian Schormann, Brad Abrams, David Anson, Diptimaya Patra, and Daniel Vaughan. Shoutouts: Last week, Koen Zwikstra announced Silverlight Spy at MIX10 Anand Iyer announced this for students on the Windows Team Blog: Be a Windows Phone 7 “Rockstar” Justin Angel blogged that Silverlight Isn't Fully Cross-Platform ... let him know if you think it's a yawn or important. On behalf of SilverlightShow, Cigdem Patlak posted MIX10: Laurent Bugnion on Silverlight adoption, WP7 and the EcoContest From SilverlightCream.com: Coding4Fun - Silverlight Real Time Face Detection René Schulte has a Coding 4 Fun article posted on facial recognition. Who better to be manipulating graphics like this than René? Sequential Asynchronous Workflows Part 2: Simplified Jeremy Likness follows up his previous post with another one that is 'simplified'. Remember his previous post began with a post on the Silverlight.net forum and Rob Eisenburg's MVVM presentation from MIX10 Windows Phone 7 Video Tutorial Hassan has a new video up on his AfricanGeek site, and that's a continuation of his previous WP7 video tutorial, adding a listbox and databinding it to the selected index of another listbox. The Los Angeles Silverlight Usergorup will be Streaming its March Meeting LIVE in Silverlight – Tonight! Victor Gaudioso used his Live Streaming knowledge to stream his User Group meeting last night from LA where Michael Washington presented on MVVM followed by Victor himself. That was last night. Today he has a couple of the videos up to view. Shining 3D Font Design - Silverlight 3 SilverLaw has a "Shining 3D Font" tutorial up, and a video on it here: New Video: How to create a 3D effect on a Silverlight 3 Textblock ... this is also available in the Expression Gallery. Silverlight 4 RC – Signing trusted apps with home made certificates Mike Taulty has a post up about building a hand-rolled cert to test out the XAP signing features, and then gives a nod to John Papa with a link to the Silverlight White Paper I've posted about before, because this info is in there as well. Developing a Windows Phone 7 Application that consumes OData Phani Raj has a tutorial up on consuming the NetFlix OData catalog on the WP7 emulator ... now *that* is cool! Make your Silverlight applications Speak to you with Microsoft Translator Tim Heuer used Silverlight to demonstrate Microsoft Translator as a speech synthesis tool using the Speak API included ... pretty cool, Tim ... lots of external links and code. Blend 4: About Path Layout, Sidebar – More About ListBox Than You Ever Wanted To Know Christian Schormann has another outstanding tutorial up on the ListBox and PathLayout in Expression Blend ... just check out the screen shots and you'll wanna read it! Silverlight 4 + RIA Services: Ready for Business: Updating Data in the Client This is the continuation of Brad Abrams' series on WCF RIA Services and is a tutorial on setting up to deal with updating the data. Tip: The CLR wrapper for a DependencyProperty should do its job and nothing more David Anson is posting some "Development Tips", and this is the first ... discussing making sure your DependencyProperty CLR wrapper stays on point... Create and Apply Theme Silverlight Application Diptimaya Patra has a tutorial up on creating and using themes. He states that "Themes are nothing but some predefined styles" ... check it out and see if it's really that easy :) Building a Windows Phone 7 Puzzle Game Daniel Vaughan has a great post up starting with installing all the tools and ending with a maze game for WP7 using XNA for sound... this is the first I've seen that integrates XNA (I think). Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Read the article

Friday Fun: The Search For Wondla

- by Asian Angel

The best day of the week is finally here again, so it is time to have some fun while waiting to go home for the weekend. The game we have for you today takes you far into humanity’s future where you journey with Eva Nine in her quest to find other humans. Note: Today’s game comes with a double bonus! First, there is a sequel game that you can move on to once you have completed the first one. Second, there are three wallpapers available in multiple sizes for those who enjoy the characters and artwork presented in the game (see below). The Search For Wondla The object of the game is to find the differences between two similar looking images based on artwork from The Search For Wondla by Tony DiTerlizzi. Are you ready to join Eva Nine in her quest to find other humans in the future? Note: There is a version available for those who would like to play The Search For Wondla on their iPads! The first game has 28 levels of difference finding goodness for you to work through. Each level will list the minimum number of differences that you need to find to progress to the next level. If you need a hint along the way just click on the Shake or Reveal options at the bottom of the game play window. Get a level completed quickly enough and you get bonus points! There will also be differences in the images for individual levels each time you play the game, so have fun! Note: The second game has 12 levels to complete. To give you a good feel for the game we have covered the first six levels here and provided seven clues for each level (you are only required to find a minimum of five). Eva Nine viewing the holographic outdoor projections in the main hub of her living quarters… Eva Nine is in a grumpy mood as Muthr visits her at bedtime… Eva Nine in her secret hideaway visiting old “childhood friends” as she contemplates her recent survival test failure. Eva Nine viewing the entire set of floor plans for the underground sanctuary where she was born and has been growing up. Eva Nine’s escape to the surface as the underground sanctuary is attacked by the bounty hunter creature Besteel. Eva Nine on the surface for the first time in her young life. Will she be successful in her quest? There is only one way to find out! Play The Search For Wondla Part 1 Play The Search For Wondla Part 2 Bonus Content If you have enjoyed this game you can learn more about the book and download the three wallpapers shown here by visiting the link below! Note: The wallpapers come in the following sizes: 1024*768, 1280*800, 1280*1024, 1440*900, iPhone, iPhone4, and iPad (click on the Extras link at the bottom of the page). Visit the Search For Wondla Homepage Do you enjoy playing difference finding games? Then you will definitely want to have a look at another wonderful game that we have covered here: Friday Fun: Isis Latest Features How-To Geek ETC The How-To Geek Guide to Learning Photoshop, Part 8: Filters Get the Complete Android Guide eBook for Only 99 Cents [Update: Expired] Improve Digital Photography by Calibrating Your Monitor The How-To Geek Guide to Learning Photoshop, Part 7: Design and Typography How to Choose What to Back Up on Your Linux Home Server How To Harmonize Your Dual-Boot Setup for Windows and Ubuntu Hang in There Scrat! – Ice Age Wallpaper How Do You Know When You’ve Passed Geek and Headed to Nerd? On The Tip – A Lamborghini Theme for Chrome and Iron What if Wile E. Coyote and the Road Runner were Human? [Video] Peaceful Winter Cabin Wallpaper Store Tabs for Later Viewing in Opera with Tab Vault

Read the article

Throttling in OSB

- by Knut Vatsendvik

Technorati Tags: soa,integration,osb,throttling,overload protection A common problem with integration is the risk of overloading a particular web service. When the capacity of a web service is reached and it continues to accept connections, it will most likely start to deteriorate. Fortunately there are 2 techniques, with Oracle Service Bus, that you can apply for protecting this from happening. You can either limit the concurrent number of requests for a Business Service (outbound requests) or you can limit the number of threads processing the requests for a Proxy Service (inbound requests). Limiting the Concurrent Number of Requests Limiting the concurrent requests for a Business Service cannot be set at design time so you have to use the built-in Oracle Service Bus Administration Console to do it (/sbconsole). Follow these steps to enable it: In Change Center, click Create to start a new Session Select Project Explorer, and navigate to the Business Service you want to limit Select the Operational Settings tab of the View a Business Service page In this tab, under Throttling, select the Enable check box. By enabling throttling you Specify a value for Maximum Concurrency Specify a positive integer value for Throttling Queue to backlog messages that has exceeded the message concurrency limit Specify the maximum time in milliseconds for Message Expiration a message can spend in Throttling Queue Click Update Click Active in Change Center to active the new settings If you re-publish the service, it will not overwrite the settings. Only if the resource is renamed or moved, it will. Please note that a throttling queue is an in-memory queue. Messages that are placed in this queue are not recoverable when a server fails or when you restart a server. Limiting the Number of Threads A better approach, in my opinion, is to limit the number of threads that can work with request. Follow these steps to do it: Open the WebLogic Server Console (/console) In Change Center, click Create to start a new Session In the left pane expand Environment and select Work Managers In the Global Work Managers page, click New Click the Work Manager radio button, then click Next Enter a Name for the new Work Manager, and click Next In the Available Targets list, select server instances or clusters on which you will deploy applications that reference the Work Manager Click Finish. The new Work Manager now appears in the Global Work Managers page. Select the new Work Manager Right next to the Maximum Threads Constraint drop-down box, click New Click the Maximum Threads Constraint radio button, then click Next Enter a Name and a thread Count to be the maximum size to allocate for requests. Click Next In the Available Targets list, select server instances or clusters on which you will deploy applications that reference the Work Manager Click Finish Click Save Click Active in Change Center to active your changes. A restart may be necessary. Puh! Almost there. Start a new session. Go to the Service Bus Console (/sbconsole) and find your consuming Proxy Service. Click the Edit button of the Transport Configuration tab. Click Next Set the Dispatch Policy to the new Work Manager Click Last Click Save Click Active in Change Center to active your changes.

Read the article

HTML Presence Controls for Communications Server 14 CodePlex Project

Showing Presence on the Web If youre running Office Communicator Server 2007 R2, you know that your only out-of-the-box option for showing presence on the web is to use the NameControl ActiveX control that ships as part of Office. Being an ActiveX control, this obviously means that youre limited to Internet Explorer. Also, nobody likes ActiveX controls What if you want to show the presence of users in a pure ASP.NET or HTML application and cant assume that the user has Communicator installed you need anASP.NET or HTML presence control. HTML Presence Controls for Microsoft Communications Server 14 We recently worked with the UC team at Microsoft on a keynote demo for TechEd 2010 in New Orleans. The demo was for a fictitious airline Fabrikam Airlines that wanted to show the presence of customer service and reservations agents on its website. Customers could also start an instant message conversation with the agents using a Silverlight web chat window that used WCF to communicate with the backend UCMA application. We built HTML Presence Controls that use AJAX to poll a REST-based WCF service running in IIS and hosting a UCMA 3.0 presence subscription application. Microsoft has graciously allowed us to publish these on CodePlex so that the development community can benefit from them: http://htmlpresencecontrols.codeplex.com/ We will be maintaining the CodePlex project as new builds of UCMA 3.0 become available. Check out the project home page on CodePlex for some more in-depth details on how the controls are implemented. ASP.NET Server Control Implementation Were providing an ASP.NET Server Control implementation that you can use stand-alone or in a GridView or Repeater (or other layout control). The control has properties that allow you to control its appearance, e.g. you can choose whether or not to show the contacts name or availability text. You can also use the server control in a layout control such as a GridView by putting it in a TemplateColumn and binding to the Sip Uri in the data source. Disclaimer Once we started working on these, we realized why Microsoft hasnt shipped such controls as part of the product. There are some tradeoffs you have to be aware of when using these controls, heres the high level. Privacy The backend UCMA 3.0 application that subscribes to presence of contacts runs as a trusted application and can thus retrieve the presence of any user in the organization. Theres currently no good way in UCMA to apply any privacy rules to ensure that the consumer of the presence controls has permission to see the presence of the contacts that the controls are bound to. Just to be absolutely crystal clear These controls provide a way to query the presence of any user in the organization, regardless of the privacy relationship between the person consuming the controls and the contacts whose presence is being displayed. Were exploring options for a design pattern that would allow you to inject some privacy controls. Keep in mind though that you would most likely be responsible for implementing this logic, as there is currently no functionality in UCMA that allows you to do that. Polling the WCF REST Service The controls poll the backend WCF service to retrieve the presence of contacts - you can control the refresh interval so that they poll less often. We implemented a caching layer so that the WCF service is always communicating with a presence cache it never communicates directly with Communications Server. For example, if your web page is showing the presence of sip:[email protected] and 500 people have the page open, the presence cache only contains one instance of the subscription Communications Server is not being polled 500 times for the presence of that contact. Once the presence of a contact changes, it is updated in the cache. There are some server-based push mechanisms that would work nicely here, such as the one that Outlook Web Access 2010 uses. Unfortunately we didnt have time to explore these options. Community Contribution Take a look at the project Issue Tracker, there are a couple of things we can use some help with. Shoot me a note if youre interested in contributing to the project. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

Software development stack 2012

A couple of months ago, I posted on Google+ about my evaluation period for a new software development stack in general. "Analysing existing 'jungle' of multiple applications and tools in various languages for clarification and future design decisions. Great fun and lots of headaches... #DevelopersLife" Surprisingly, there was response... ;-) - And this series of articles is initiated by this post. Thanks Olaf. The past few years... Well, after all my first choice of software development in the past was Microsoft Visual FoxPro 6.0 - 9.0 in combination with Microsoft SQL Server 2000 - 2008 and Crystal Reports 9.x - XI. Honestly, it is my main working environment due to exisiting maintenance and support plans with my customers, but also for new project requests. And... hands on, it is still my first choice for data manipulation and migration options. But the earth is spinning, and as a software craftsman one has to be flexible with the choice of tools. In parallel to my knowledge and expertise in the above mentioned tools, I already started very early to get my hands dirty with the Microsoft .NET Framework. If I remember correctly, I started back in 2002/2003 with the first version ever. But this was more out of curiousity. During the years this kind of development got more serious and demanding, and I focused myself on interop and integrational libraries and applications. Mainly, to expose exisitng features of the .NET Framework to Visual FoxPro - I even had a session about that at the German Developer's Conference in Frankfurt. Observation of recent developments With the recent hype on Javascript and HTML5, especially for Windows 8 and Windows Phone 8 development, I had several 'Deja vu' events... Back in early 2006 (roughly) I had a conversation on the future of Web and Desktop development with my former colleagues Golo Roden and Thomas Wilting about the underestimation of Javascript and its root as a prototype-based, dynamic, full-featured programming language. During this talk with them I took the Mozilla applications, namely Firefox and Thunderbird, as a reference which are mainly based on XML, CSS, Javascript and images - besides the core rendering engine. And that it is very simple to write your own extensions for the Gecko rendering engine. Looking at the Windows Vista Sidebar widgets, just underlines this kind of usage. So, yes the 'Modern UI' of Windows 8 based on HTML5, CSS3 and Javascript didn't come as any surprise to me. Just allow me to ask why did it take so long for Microsoft to come up with this step? A new set of tools Ok, coming from web development in HTML 4, CSS and Javascript prior to Visual FoxPro, I am partly going back to that combination of technologies. What is the other part of the software development stack here at IOS Indian Ocean Software Ltd? Frankly, it is easy and straight forward to describe: Microsoft Visual FoxPro 9.0 SP 2 - still going strong! Visual Studio 2012 (C# on latest .NET Framework) MonoDevelop Telerik DevCraft Suite WPF ASP.NET MVC Windows 8 Kendo UI OpenAccess ORM Reporting JustCode CODE Framework by EPS Software MonoTouch and Mono for Android Subversion and additional tools for the daily routine: Notepad++, JustCode, SQL Compare, DiffMerge, VMware, etc. Following the principles of Clean Code Developer and the Agile Manifesto Actually, nothing special about this combination but rather a solid fundament to work with and create line of business applications for customers.Honestly, I am really interested in your choice of 'weapons' for software development, and hopefully there might be some nice conversations in the comment section. Over the next coming days/weeks I'm going to describe a little bit more in detail about the reasons for my decision. Articles will be added bit by bit here as reference, too. Please bear with me... Regards, JoKi

Read the article

Systems Solutions at COLLABORATE12

- by ferhat

Want to connect with fellow Oracle users and learn more about how to maximize your Oracle software environments with Oracle Systems? Pack your bags for Las Vegas! COLLABORATE 12 is right around the corner! COLLABORATE 12 Conference will be held at the Mandalay Bay in Las Vegas, NV 22-26 April, 2012. This is an event designed and delivered by users just like you with sessions, interactive panel discussions and hands-on learning opportunities packed with first-hand experiences, case studies and practical “how-to” content.. This year’s event includes a number of educational sessions and demos for users interested in learning from the experts how to use Oracle Optimized Solutions to get the most out of their Oracle Technology and Application software. Oracle Optimized Solutions are proven blueprints that eliminate integration guesswork by combing best in class hardware and software components to deliver complete system architectures that are fully tested, and include documented best practices that reduce integration risks and deliver better application performance. And because they are highly flexible by design, Oracle Optimized Solutions can be implemented as an end-to-end solution or easily adapted into existing environments. Follow Oracle Infrared at Twitter, Facebook, Google+, and LinkedIn to catch the latest news, developments, announcements, and inside views from Oracle Optimized Solutions. Please come by our Exhibition Booth #1273 to see the demos and meet 1-1 with the experts behind a number of Oracle Optimized Solutions including those for JD Edwards EnterpriseOne, E-Business Suite, PeopleSoft HCM, Oracle WebCenter, and Oracle Database. Exhibitor Showcase Booth #1273 DAY TIME TITLE Monday April 23 6:00 pm - 8:00 pm Welcome Reception in the Exhibitor Showcase Tuesday April 24 10:15 am - 4:00 pm Exhibitor Showcase Open 1:00 pm - 2:00 pm Dedicated Exhibitor Showcase Time 5:30 pm - 7:00 pm Exhibitor Showcase Happy Hour Wednesday April 25 10:30 am - 3:00 pm Exhibitor Showcase Open 2:15 pm -3:00 pm Afternoon Break in Exhibitor Showcase There are also a number of deep dive, educational sessions covering deployment best practices using Oracle’s engineered systems and best-in-class hardware, operating system and virtualization technologies. Education Sessions DAY TIME TITLE LOCATION Monday April 23 9:45 am - 10:45 am Architecting and Implementing Backup and Recovery Solutions Surf E Tuesday April 24 2:00 pm – 3:00 pm Oracle's High Performance Systems for JD Edwards EnterpriseOne Mandalay Bay GH 4:30 pm - 5:30 pm Virtualization Boot Camp: What's New with Oracle VM Server for x86 Mandalay Bay C 9:30 am - 10:30 am Oracle on Oracle VM - Expert Panel Mandalay Bay L Wednesday April 25 9:30 am - 10:30 am Cloud Computing Directions: Part II Understanding Oracle's Cloud Directions South Seas E And don’t forget the keynotes and software roadmap sessions! Keynotes and Roadmap Sessions DAY TIME TITLE LOCATION Sunday April 22 3:20 pm – 4:20 pm Oracle’s Cloud Computing Strategy Breakers B Monday April 23 11:00 am – 12:00 pm JD Edwards - Vision, Promises and Execution: IT'S THE WAY WE ROLL and Why it Matters! Mandalay Bay A 11:00 am – 12:00 pm PeopleSoft Executive Update and Roadmap Mandalay Bay J 1:15 pm - 2:15 pm Oracle Database - Engineered for Innovation Mandalay Bay L 2:30 pm - 3:30 pm Oracle E-Business Suite Applications Strategy and General Manager Update Mandalay Bay D Tuesday April 24 9:15 am - 10:15 am IT at Oracle: The Art of IT Transformation to Enable Business Growth Mandalay Bay Ballroom H

Read the article

What's new in ASP.Net 4.5 and VS 2012 - part 2

- by nikolaosk

This is the second post in a series of posts titled "What's new in ASP.Net 4.5 and VS 2012".You can have a look at the first post in this series, here. Please find all my posts regarding VS 2012, here. In this post I will be looking into the various new features available in ASP.Net 4.5 and VS 2012.I will be looking into the enhancements in the HTML Editor,CSS Editor and Javascript Editor.In order to follow along this post you must have Visual Studio 2012 and .Net Framework 4.5 installed in your machine.Download and install VS 2012 using this link.My machine runs on Windows 8 and Visual Studio 2012 works just fine.I will work fine in Windows 7 as well so do not worry if you do not have the latest Microsoft operating system.1) Launch VS 2012 and create a new Web Forms application by going to File - >New Web Site - > ASP.Net Web Forms Site.2) Choose an appropriate name for your web site.3) I would like to point out the new enhancements in the CSS editor in VS 2012. In the Solution Explorer in the Content folder and open the Site.cssThen when I try to change the background-color property of the html element, I get a brand new handy color-picker. Have a look at the picture below Please note that the color-picker shows all the colors that have been used in this website. Then you can expand the color-picker by clicking on the arrows. Opacity is also supported. Have a look at the picture below4) There are also mobile styles in the Site.css .These are based on media queries.Please have a look at another post of mine on CSS3 media queries. Have a look at the picture below In this case when the maximum width of the screen is less than 850px there will be a new layout that will be dictated by these new rules. Also CSS snippets are supported. Have a look at the picture below I am writing a new CSS rule for an image element. I write the property transform and hit tab and then I have cross-browser CSS handling all of the major vendors.Then I simply add the value rotate and it is applied to all the cross browser options.Have a look at the picture below. I am sure you realise how productive you can become with all these CSS snippets. 5) Now let's have a look at the new HTML editor enhancements in VS 2012You can drag and drop a GridView web server control from the Toolbox in the Site.master file.You will see a smart tag (that was only available in the Design View) that you can expand and add fields, format the web server control.Have a look at the picture below 6) We also have available code snippets. I type <video and then press tab twice.By doing that I have the rest of the HTML 5 markup completed.Have a look at the picture below 7) I have new support for the input tag including all the HTML 5 types and all the new accessibility features.Have a look at the picture below 8) Another interesting feature is the new Intellisense capabilities. When I change the DocType to 4.01 and the type <audio>,<video> HTML 5 tags, Intellisense does not recognise them and add squiggly lines.Have a look at the picture below All these features support ASP.Net Web forms, ASP.Net MVC applications and Web Pages. 9) Finally I would like to show you the enhanced support that we have for Javascript in VS 2012. I have full Intellisense support and code snippets support.I create a sample javascript file. I type If and press tab. I type while and press tab.I type for and press tab.In all three cases code snippet support kicks in and completes the code stack. Have a look at the picture below We also have full Intellisense support.Have a look at the picture below I am creating a simple function and then type some sort of XML like comments for the input parameters. Have a look at the picture below. Then when I call this function, Intellisense has picked up the XML comments and shows the variables data types.Have a look at the picture below Hope it helps!!!

Read the article

OWB 11gR2 – OLAP and Simba

- by David Allan

Oracle Warehouse Builder was the first ETL product to provide a single integrated and complete environment for managing enterprise data warehouse solutions that also incorporate multi-dimensional schemas. The OWB 11gR2 release provides Oracle OLAP 11g deployment for multi-dimensional models (in addition to support for prior releases of OLAP). This means users can easily utilize Simba's MDX Provider for Oracle OLAP (see here for details and cost) which allows you to use the powerful and popular ad hoc query and analysis capabilities of Microsoft Excel PivotTables® and PivotCharts® with your Oracle OLAP business intelligence data. The extensions to the dimensional modeling capabilities have been built on established relational concepts, with the option to seamlessly move from a relational deployment model to a multi-dimensional model at the click of a button. This now means that ETL designers can logically model a complete data warehouse solution using one single tool and control the physical implementation of a logical model at deployment time. As a result data warehouse projects that need to provide a multi-dimensional model as part of the overall solution can be designed and implemented faster and more efficiently. Wizards for dimensions and cubes let you quickly build dimensional models and realize either relationally or as an Oracle database OLAP implementation, both 10g and 11g formats are supported based on a configuration option. The wizard provides a good first cut definition and the objects can be further refined in the editor. Both wizards let you choose the implementation, to deploy to OLAP in the database select MOLAP: multidimensional storage. You will then be asked what levels and attributes are to be defined, by default the wizard creates a level bases hierarchy, parent child hierarchies can be defined in the editor. Once the dimension or cube has been designed there are special mapping operators that make it easy to load data into the objects, below we load a constant value for the total level and the other levels from a source table. Again when the cube is defined using the wizard we can edit the cube and define a number of analytic calculations by using the 'generate calculated measures' option on the measures panel. This lets you very easily add a lot of rich analytic measures to your cube. For example one of the measures is the percentage difference from a year ago which we can see in detail below. You can also add your own custom calculations to leverage the capabilities of the Oracle OLAP option, either by selecting existing template types such as moving averages to defining true custom expressions. The 11g OLAP option now supports percentage based summarization (the amount of data to precompute and store), this is available from the option 'cost based aggregation' in the cube's configuration. Ensure all measure-dimensions level based aggregation is switched off (on the cube-dimension panel) - previously level based aggregation was the only option. The 11g generated code now uses the new unified API as you see below, to generate the code, OWB needs a valid connection to a real schema, this was not needed before 11gR2 and is a new requirement since the OLAP API which OWB uses is not an offline one. Once all of the objects are deployed and the maps executed then we get to the fun stuff! How can we analyze the data? One option which is powerful and at many users' fingertips is using Microsoft Excel PivotTables® and PivotCharts®, which can be used with your Oracle OLAP business intelligence data by utilizing Simba's MDX Provider for Oracle OLAP (see Simba site for details of cost). I'll leave the exotic reporting illustrations to the experts (see Bud's demonstration here), but with Simba's MDX Provider for Oracle OLAP its very simple to easily access the analytics stored in the database (all built and loaded via the OWB 11gR2 release) and get the regular features of Excel at your fingertips such as using the conditional formatting features for example. That's a very quick run through of the OWB 11gR2 with respect to Oracle 11g OLAP integration and the reporting using Simba's MDX Provider for Oracle OLAP. Not a deep-dive in any way but a quick overview to illustrate the design capabilities and integrations possible.

Read the article

So No TECH job so far.

- by Ratman21

O I found some temp work for the US Census and I have managed to keep the house (so far) but, it looks like I/we are going to have to do a short sale and the temp job will be ending soon. On top of that it looks like the unemployment fund for me is drying up. I will have about one month left after the Census job is done. I am now down to Appling for work at the KFC. This is type a work I started with, before I was a tech geek and really I didn’t think I would be doing this kind of work in my later years but, I have a wife and kid. So I got to suck it up and do it. Oh and here is my new resume…go ahead I know you want to tare it up. I really don’t care any more. Scott L. Newman 45219 Dutton Way, Callahan, FL32011 H: (904)879-4880 C: (352)356-0945 E: [email protected] Web: http://beingscottnewman.webs.com/ ______ OBJECTIVE To obtain a Network or Technical support position KEYWORD SUMMARY CompTIA A+, Network+, and Security+ Certified., Network Operation, Technical Support, Client/Vendor Relations, Networking/Administration, Cisco Routers/Switches, Helpdesk, Microsoft Office Suite, Website Design/Dev./Management, Frame Relay, ISDN, Windows NT/98/XP, Visio, Inventory Management, CICS, Programming, COBOL IV, Assembler, RPG QUALIFICATIONS SUMMARY Twenty years’ experience in computer operations, technical support, and technical writing. Also have two and half years’ experience in internet / intranet operations. PROFESSIONAL EXPERIENCE October 2009 – Present* Volunteer Web site and PC technician – Part time True Faith Christian Fellowship Church – Callahan, FL, Project: Create and maintain web site for Church to give it a worldwide exposure Aug 2008 – September 2009:* Volunteer Church sound and video technician – Part time Thomas Creek Baptist Church – Callahan, FL *Note Jobs were for the learning and/or keeping updated on skills, while looking for a tech job and training for new skills. February 2005 to October 2008: Client Server Dev/Analyst I, Fidelity National Information Services, Jacksonville, FL (FNIS acquired Certegy in 2005 and out of 20 personal, was one of three kept on.) August 2003 to February 2005: Senior NetOps Operator, Certegy, St.Pete, Fl. (August 2003, Certegy terminated contract with EDS and out of 40 personal, was one of six kept on.) Projects: Creation and update of listing and placement for all raised floor equipment at St.Pete site. Listing was made up of, floor plan of the raised floor and equipment racks diagrams showing the placement of all devices using Visio. This was cross-referenced with an inventory excel document showing what dept was responsible for each device. Sole creator of Network operation and Server Operation procedures guide (NetOps Guide). Expertise: Resolving circuit and/or router issues or assist circuit carrier in resolving issue from the company Network Operation Center (NOC). As well as resolving application problems or assist application support in resolution of it. July 1999 to August 2003: Senior NetOps Operator,EDS (Certegy Account), St.Pete, FL Same expertise and on going projects as listed above for FNIS/Certegy. (Equifax outsourced the NetOps dept. to EDS in 1999) January 1991 to July 1999: NetOps/Tandem Operator, Equifax, St.Pete & Tampa, FL Same as all of the above for FNIS/Certegy/EDS except for circuit and router issues EDUCATION ? New Horizons Computer Learning Center, Jacksonville, Florida - CompTIA A+, Security+, and Network+ Certified. Currently working on CCNA Certification 07/30/10 ? Mott Community College, Flint, Michigan – Associates Degree - Data Processing and General Education ? Currently studying Japanese

Read the article

Oracle Enterprise Manager 11g is Here!

- by chung.wu

We hope that you enjoyed the launch event. If you missed it, you may still watch it via our on demand webcast, which is being produced and will be posted very shortly. 11gR1 is a major release of Oracle Enterprise Manager, and as one would expect from a big release, there are many new capabilities that appeal to a broad set of audience. Before going into the laundry list of new features, let's talk about the key themes for this release to put things in perspective. First, this release is about Business Driven Application Management. The traditional paradigm of component centric systems management simply cannot satisfy the management needs of modern distributed applications, as they do not provide adequate visibility of whether these applications are truly meeting the service level expectations of the business users. Business Driven Application Management helps IT manage applications according to the needs of the business users so that valuable IT resources can be better focused to help deliver better business results. To support Business Driven Application Management, 11gR1 builds on the work that we started in 10g to provide better support for user experience management. This capability helps IT better understand how users use applications and the experience that the applications provide so that IT can take actions to help end users get their work done more effectively. In addition, this release also delivers improved business transaction management capabilities to make it faster and easier to understand and troubleshoot transaction problems that impact end user experience. Second, this release includes strengthened Integrated Application-to-Disk Management. Every component of an application environment, from the application logic to the application server, to database, host machines and storage devices, etc... can affect end user experience. After user experience improvement needs are identified, IT needs tools that can be used do deep dive diagnostics for each of the application environment component, analyze configurations and deploy changes. Enterprise Manager 11gR1 extends coverage of key application environment components to include full support for Oracle Database 11gR2, Exadata V2, and Fusion Middleware 11g. For composite and Java application management, two key pieces of technologies, JVM Diagnostic and Composite Application Monitoring and Modeler, are now fully integrated into Enterprise Manager so there is no need to install and maintain separate tools. In addition, we have delivered the first set of integration between Enterprise Manager Grid Control and Enterprise Manager Ops Center so that hardware level events can be centrally monitored via Grid Control. Finally, this release delivers Integrated Systems Management and Support for customers of Oracle technologies. Traditionally, systems management tools and tech support were separate silos. When problems occur, administrators used internally deployed tools to try to solve the problems themselves. If they couldn't fix the problems, then they would use some sort of support website to get help from the vendor's support staff. Oracle Enterprise Manager 11g integrates problem diagnostic and remediation workflow. Administrators can use Oracle Enterprise Manager's various diagnostic tools to begin the troubleshooting process. They can also use the integrated access to My Oracle Support to look up solutions and download software patches. If further help is needed, administrators can open service requests from right within Oracle Enterprise Manager and track status update. Oracle's support staff, using Enterprise Manager's configuration management capabilities, can collect important configuration information about customer environments in order to expedite problem resolution. This tight integration between Oracle Enterprise Manager and My Oracle Support helps Oracle customers achieve a Superior Ownership Experience for their Oracle products. So there you have it. This is a brief 50,000 feet overview of Oracle Enterprise Manager 11g. We know you are hungry for the details. We are going to write about it in the coming days and weeks. For those of you that absolutely can't wait to find out more, you may download our software to try it out today. In fact, for the first time ever, the initial release of Oracle Enterprise Manager is available for both 32 and 64 bit Linux. Additional O/S ports will arrive in the coming weeks. Please stay tuned on the Oracle Enterprise Manager blog for additional updates.

Read the article

Fünf Jahre Bonn-to-Code.Net – das muss gefeiert werden!

- by WeigeltRo

Als ich am 1. Januar 2006 die .NET User Group “Bonn-to-Code.Net” gründete (den genialen Namen ließ sich mein Kollege Jens Schaller in Anlehnung an das Motto meines Blogs einfallen), ahnte ich nicht, wie schnell sich alles entwickeln würde. So konnte, nach ein wenig Werbung über diverse Kanäle, bereits am 14. Februar 2006 das erste Treffen stattfinden und wenige Tage später wurde Bonn-to-Code.Net offiziell in den Kreis der INETA User Groups aufgenommen. Das ist nun etwas über fünf Jahre her und soll am 22. März 2011 um 19:00 (Einlass ab 18:30) gebührend gefeiert werden, und zwar im Rahmen unseres März-Treffens. Der Abend bietet Vorträge zu “Flow Design und seine Umsetzung mit Event Based Components” sowie “WCF Services mal anders” (ausführlichere Infos zu den Vortragsinhalten gibt es hier). Anschließend gibt es bei einer großen Verlosung neben Büchern auch hochkarätige Software-Preise zu gewinnen. Zusätzlich zu Lizenzen für JetBrains ReSharper und Telerik Ultimate Collection warten dieses Mal (mit freundlicher Unterstützung durch Microsoft Deutschland) je ein Windows 7 Ultimate und ein Office 2010 Professional Plus auf ihre glücklichen Gewinner. Und wer nicht zu spät kommt, kann auch ganz ohne Losglück eines von vielen kleinen Goodies abgreifen. Eine Anmeldung ist nicht erforderlich, eine Anfahrtsbeschreibung gibt es auf der Bonn-to-Code.Net Website. Es freut mich dabei besonders, dass wir zu diesem Termin u.a. einen Sprecher an Bord haben, der bereits beim Gründungstreffen dabei war: Stefan Lieser. Mittlerweile z.B. durch die Clean Code Developer Initiative bekannt, ist Stefan nur ein Beispiel für eine ganze Reihe von Sprechern auf den diversen Entwicklerkonferenzen, die ihre ersten Erfahrungen u.a. bei Bonn-to-Code.Net gemacht haben. …und was ist in den fünf Jahren so passiert? Einiges! Ein Community Launch Event in 2007, zwei Microsoft TechTalks (2007,2008), Gastsprecher aus ganz Deutschland und dem Ausland (JP Boodhoo, Harry Pierson). Doch nichts hat die fünf Jahre so geprägt wie die Zusammenarbeit mit “den Nachbarn aus Köln”. Zum Zeitpunkt der Gründung von Bonn-to-Code.Net gab es im gesamten Köln/Bonner Raum keine .NET User Group. Und so war es nicht ungewöhnlich, dass der erste Interessent, der sich auf meinen Blog-Eintrag vom 4. Januar 2006 hin meldete, aus Köln stammte: Albert Weinert. Kurze Zeit nach der Bonner Gruppe wurde dann – initiiert durch Angelika Wöpking und Stefan Lange – schließlich die .NET User Group Köln gegründet. Wobei Stefan wiederum vor dem Kölner Gründungstreffen Ende April bereits Bonner Treffen besucht hatte; insgesamt also eine Menge personeller Überlapp zwischen Köln und Bonn. Als nach einem etwas holprigen Start der Kölner Gruppe schließlich Albert und Stefan die Leitung übernahmen, war klar dass Köln und Bonn in vielerlei Hinsicht eng zusammenarbeiten würden. Sei es durch die Koordination von Themen und Terminen oder auch durch Werbung für die Treffen der jeweils anderen Gruppe. Der nächste Schritt kam dann mit der Beteiligung der Kölner und Bonner Gruppen an der Organisation des “AfterLaunch” im April 2008. Der große Erfolg dieser Veranstaltung war der Ansporn, in Bezug auf die Zusammenarbeit ein neues Kapitel aufzuschlagen. Anfang 2009 wurde zunächst der dotnet Köln/Bonn e.V. gegründet, um für eigene Großveranstaltungen ein solides Fundament zu schaffen. Im Mai 2009 folgte dann die erste “dotnet Cologne” – ein voller Erfolg. Und mit der “dotnet Cologne 2010” etablierte sich diese Konferenz als das große .NET Community Event in Deutschland. Am 6. Mai 2011 findet nun die “dotnet Cologne 2011” statt; hinter den Kulissen laufen die Vorbereitungen dazu bereits seit Monaten auf Hochtouren. Alles in allem sehr aufregende fünf Jahre, in denen viel passiert ist. Mal schauen, wie die nächsten fünf Jahre werden…

Read the article

Getting Started with Chart control in ASP.Net 4.0

- by sreejukg

In this article I am going to demonstrate the Chart control available in ASP.Net 4 and Visual Studio 2010. Most of the web applications need to generate reports for business users. The business users are happy to view the results in a graphical format more that seeing it in numbers. For the purpose of this demonstration, I have created a sales table. I am going to create charts from this sale data. The sale table looks as follows I have created an ASP.Net web application project in Visual Studio 2010. I have a default.aspx page that I am going to use for the demonstration. First I am going to add a chart control to the page. Visual Studio 2010 has a chart control. The Chart Control comes under the Data Tab in the toolbox. Drag and drop the Chart control to the default.aspx page. Visual Studio adds the below markup to the page. <asp:Chart ID="Chart1" runat="server"></asp:Chart> In the designer view, the Chart controls gives the following output. As you can see this is exactly similar to other server controls in ASP.Net, and similar to other controls under the data tab, Chart control is also a data bound control. So I am going to bind this with my sales data. From the design view, right click the chart control and select “show smart tag” Here you need so choose the Data source property and the chart type. From the choose data source drop down, select new data source. In the data source configuration wizard, select the SQL data base and write the query to retrieve the data. At first I am going to show the chart for amount of sales done by each sales person. I am going to use the following query inside sqldatasource select command. “SELECT SUM(SaleAmount) AS Expr1, salesperson FROM SalesData GROUP BY SalesPerson” This query will give me the amount of sales achieved by each sales person. The mark up of SQLDataSource is as follows. <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:SampleConnectionString %>" SelectCommand="SELECT SUM(SaleAmount) as amount, SalesPerson FROM SalesData GROUP BY SalesPerson"></asp:SqlDataSource> Once you selected the data source for the chart control, you need to select the X and Y values for the columns. I have entered salesperson in the X Value member and amount in the Y value member. After modifications, the Chart control looks as follows Click F5 to run the application. The output of the page is as follows. Using ASP.Net it is much easier to represent your data in graphical format. To show this chart, I didn’t even write any single line of code. The chart control is a great tool that helps the developer to show the business intelligence in their applications without using third party products. I will write another blog that explore further possibilities that shows more reports by using the same sales data. If you want to get the Project in zipped format, post your email below.

Read the article

NServiceBus Generic Host and mqsvc.exe high CPU

- by Michael Stephenson

We have been doing some work with NServiceBus recently and observed some unusual behaviour which was caused by our mistake and seemed worthy of a small post. The Scenario In our solution we were doing some standard NServiceBus stuff by pushing a message to a queue using NServiceBus. We had a direct send/receive scenario rather than a publish/subscribe one. The background process which was meant to collect the message and then process it was a normal NServiceBus message handler. We would run the NServiceBus.Host.exe which would find the handler and then do the usual NServiceBus magic. The Problem In this solution we were creating some automated tests around this module of the integration process to ensure that it would work well. We had two tests. Test 1 This test would start NServiceBus.Host.exe using the Process object, then seed a message to the queue via our web service façade sitting above the queue which wrapped NServiceBus. The background process would then process the message and the test would check the message had been processed fine. If all was well then the NServiceBus.Host.exe process was stopped. Test 2 In test 2 we would do a very similar thing except that instead of starting the process the test would install NServiceBus.Host.exe as a windows service and then start the service before the test and once the test was executed it would stop the test. The Results of the Tests Test 1 worked really well, however in test 2 we found that it didn’t really work at all, instead of doing the background process we were finding that between mqsvc.exe and NServiceBus.Host.exe the CPU on the machine was maxed and nothing was really happening. The Solution After trying a few things we found it was the permissions on the queue were not set correctly. Once this was resolved it all worked fine and CPU was not excessive and ran just like the console application. I think the couple of take aways from this are: Make sure you set the windows service for NserviceBus Generic Host to the right credentials When you install the generic host as a windows service then by default it will use the default windows credentials. For any production like scenario you should be using a domain account to run the process as via the windows service. Make sure you have the queue set with the right permissions For the credentials you have used to configure the generic host as a windows service you should ensure that this user has the appropriate permissions for any queues it will interact with. Make sure you turn on the right logging configuration in NServiceBus When this wasnt working correctly we didnt know there was an issue, we were just experiencing the high CPU condition. I am a little surprised that there wasnt something logged and that the process didnt crash. I guess this could be by design bearing in mind that the process could be monitoring many queues. In this point Im just saying that originally we didnt have all of the log4net logging which is available from NServiceBus turned on. Its probably a good idea to have this turned on and configured until you are happy your solution is working fine. Thanks to Ahmed Hashmi on my team who got this working in the end.

Read the article

Redirect all access requests to a domain and subdomain(s) except from specific IP address? [closed]

- by Christopher

This is a self-answered question... After much wrangling I found the magic combination of mod_rewrite rules so I'm posting here. My scenario is that I have two domains - domain1.com and domain2.com - both of which are currently serving identical content (by way of a global 301 redirect from domain1 to domain2). Domain1 was then chosen to be repurposed to be a 'portal' domain - with a corporate CMS-based site leading off from the front page, and the existing 'retail' domain (domain2) left to serve the main web site. In addition, a staging subdomain was created on domain1 in order to prepare the new corporate site without impinging on the root domain's existing operation. I contemplated just rewriting all requests to domain2 and setting up the new corporate site 'behind the scenes' without using a staging domain, but I usually use subdomains when setting up new sites. Finally, I required access to the 'actual' contents of the domains and subdomains - i.e., to not be redirected like all other visitors - in order that I can develop the new site and test it in the staging environment on the live server, as I'm not using a separate development webserver in this case. I also have another test subdomain on domain1 which needed to be preserved. The way I eventually set it up was as follows: (10.2.2.1 would be my home WAN IP) .htaccess in root of domain1 RewriteEngine On RewriteCond %{REMOTE_ADDR} !^10\.2\.2\.1 RewriteCond %{HTTP_HOST} !^staging.domain1.com$ [NC] RewriteCond %{HTTP_HOST} !^staging2.domain1.com$ [NC] RewriteRule ^(.*)$ http://domain2.com/$1 [R=301] .htaccess in staging subdomain on domain1: RewriteEngine On RewriteCond %{REMOTE_ADDR} !^10\.2\.2\.1 RewriteCond %{HTTP_HOST} ^staging.revolver.coop$ [NC] RewriteRule ^(.*)$ http://domain2.com/$1 [R=301,L] The multiple .htaccess files and multiple rulesets require more processing overhead and longer iteration as the visitor is potentially redirected twice, however I find it to be a more granular method of control as I can selectively allow more than one IP address access to individual staging subdomain(s) without automatically granting them access to everything else. It also keeps the rulesets fairly simple and easy to read. (or re-interpret, because I'm always forgetting how I put rules together!) If anybody can suggest a more efficient way of merging all these rules and conditions into just one main ruleset in the root of domain1, please post! I'm always keen to learn, this post is more my attempt to preserve this information for those who are looking to redirect entire domains for all visitors except themselves (for design/testing purposes) and not just denying specific file access for maintenance mode (there are many good examples of simple mod_rewrite rules for 'maintenance mode' style operation easily findable via Google). You can also extend the IP address detection - firstly by using wildcards ^10\.2\.2\..*: the last octet's \..* denotes the usual "." and then "zero or more arbitrary characters", signified by the .* - so you can specify specific ranges of IPs in a subnet or entire subnets if you wish. You can also use square brackets: ^10\.2\.[1-255]\.[120-140]; ^10\.2\.[1-9]?[0-9]\.; ^10\.2\.1[0-1][0-9]\. etc. The third way, if you wish to specify multiple discrete IP addresses, is to bracket them in the style of ^(1.1.1.1|2.2.2.2|3.3.3.3)$, and you can of course use square brackets to substitute octets or single digits again. NB: if you're using individual RewriteCond lines to specify multiple IPs / ranges, make sure to put [OR] at the end of each one otherwise mod_rewrite will interpret as "if IP address matches 1.1.1.1 AND if IP address matches 2.2.2.2... which is of course impossible! However as far as I'm aware this isn't necessary if you're using the ! negator to specify "and is not...". Kudos also to SE: this older question also came in useful when I was verifying my own knowledge prior to my futzing around with code. This page was helpful, as were the various other links posted below (can't hyperlink them all due to spam protection... other regex checkers are available). The AddedBytes cheat sheet's useful to pin up on your wall. Other referenced URLs: internetofficer.com/seo-tool/regex-tester/ fantomaster.com/faarticles/rewritingurls.txt internetofficer.com/seo-tool/regex-tester/ addedbytes.com/cheat-sheets/mod_rewrite-cheat-sheet/

Read the article

Code Contracts: Unit testing contracted code

- by DigiMortal

Code contracts and unit tests are not replacements for each other. They both have different purpose and different nature. It does not matter if you are using code contracts or not – you still have to write tests for your code. In this posting I will show you how to unit test code with contracts. In my previous posting about code contracts I showed how to avoid ContractExceptions that are defined in code contracts runtime and that are not accessible for us in design time. This was one step further to make my randomizer testable. In this posting I will complete the mission. Problems with current code This is my current code. public class Randomizer { public static int GetRandomFromRangeContracted(int min, int max) { Contract.Requires<ArgumentOutOfRangeException>( min < max, "Min must be less than max" ); Contract.Ensures( Contract.Result<int>() >= min && Contract.Result<int>() <= max, "Return value is out of range" ); var rnd = new Random(); return rnd.Next(min, max); } } As you can see this code has some problems: randomizer class is static and cannot be instantiated. We cannot move this class between components if we need to, GetRandomFromRangeContracted() is not fully testable because we cannot currently affect random number generator output and therefore we cannot test post-contract. Now let’s solve these problems. Making randomizer testable As a first thing I made Randomizer to be class that must be instantiated. This is simple thing to do. Now let’s solve the problem with Random class. To make Randomizer testable I define IRandomGenerator interface and RandomGenerator class. The public constructor of Randomizer accepts IRandomGenerator as argument. public interface IRandomGenerator { int Next(int min, int max); } public class RandomGenerator : IRandomGenerator { private Random _random = new Random(); public int Next(int min, int max) { return _random.Next(min, max); } } And here is our Randomizer after total make-over. public class Randomizer { private IRandomGenerator _generator; private Randomizer() { _generator = new RandomGenerator(); } public Randomizer(IRandomGenerator generator) { _generator = generator; } public int GetRandomFromRangeContracted(int min, int max) { Contract.Requires<ArgumentOutOfRangeException>( min < max, "Min must be less than max" ); Contract.Ensures( Contract.Result<int>() >= min && Contract.Result<int>() <= max, "Return value is out of range" ); return _generator.Next(min, max); } } It seems to be inconvenient to instantiate Randomizer now but you can always use DI/IoC containers and break compiled dependencies between the components of your system. Writing tests for randomizer IRandomGenerator solved problem with testing post-condition. Now it is time to write tests for Randomizer class. Writing tests for contracted code is not easy. The main problem is still ContractException that we are not able to access. Still it is the main exception we get as soon as contracts fail. Although pre-conditions are able to throw exceptions with type we want we cannot do much when post-conditions will fail. We have to use Contract.ContractFailed event and this event is called for every contract failure. This way we find ourselves in situation where supporting well input interface makes it impossible to support output interface well and vice versa. ContractFailed is nasty hack and it works pretty weird way. Although documentation sais that ContractFailed is good choice for testing contracts it is still pretty painful. As a last chance I got tests working almost normally when I wrapped them up. Can you remember similar solution from the times of Visual Studio 2008 unit tests? Cannot understand how Microsoft was able to mess up testing again. [TestClass] public class RandomizerTest { private Mock<IRandomGenerator> _randomMock; private Randomizer _randomizer; private string _lastContractError; public TestContext TestContext { get; set; } public RandomizerTest() { Contract.ContractFailed += (sender, e) => { e.SetHandled(); e.SetUnwind(); throw new Exception(e.FailureKind + ": " + e.Message); }; } [TestInitialize()] public void RandomizerTestInitialize() { _randomMock = new Mock<IRandomGenerator>(); _randomizer = new Randomizer(_randomMock.Object); _lastContractError = string.Empty; } #region InputInterfaceTests [TestMethod] [ExpectedException(typeof(Exception))] public void GetRandomFromRangeContracted_should_throw_exception_when_min_is_not_less_than_max() { try { _randomizer.GetRandomFromRangeContracted(100, 10); } catch (Exception ex) { throw new Exception(string.Empty, ex); } } [TestMethod] [ExpectedException(typeof(Exception))] public void GetRandomFromRangeContracted_should_throw_exception_when_min_is_equal_to_max() { try { _randomizer.GetRandomFromRangeContracted(10, 10); } catch (Exception ex) { throw new Exception(string.Empty, ex); } } [TestMethod] public void GetRandomFromRangeContracted_should_work_when_min_is_less_than_max() { int minValue = 10; int maxValue = 100; int returnValue = 50; _randomMock.Setup(r => r.Next(minValue, maxValue)) .Returns(returnValue) .Verifiable(); var result = _randomizer.GetRandomFromRangeContracted(minValue, maxValue); _randomMock.Verify(); Assert.AreEqual<int>(returnValue, result); } #endregion #region OutputInterfaceTests [TestMethod] [ExpectedException(typeof(Exception))] public void GetRandomFromRangeContracted_should_throw_exception_when_return_value_is_less_than_min() { int minValue = 10; int maxValue = 100; int returnValue = 7; _randomMock.Setup(r => r.Next(10, 100)) .Returns(returnValue) .Verifiable(); try { _randomizer.GetRandomFromRangeContracted(minValue, maxValue); } catch (Exception ex) { throw new Exception(string.Empty, ex); } _randomMock.Verify(); } [TestMethod] [ExpectedException(typeof(Exception))] public void GetRandomFromRangeContracted_should_throw_exception_when_return_value_is_more_than_max() { int minValue = 10; int maxValue = 100; int returnValue = 102; _randomMock.Setup(r => r.Next(10, 100)) .Returns(returnValue) .Verifiable(); try { _randomizer.GetRandomFromRangeContracted(minValue, maxValue); } catch (Exception ex) { throw new Exception(string.Empty, ex); } _randomMock.Verify(); } #endregion } Although these tests are pretty awful and contain hacks we are at least able now to make sure that our code works as expected. Here is the test list after running these tests. Conclusion Code contracts are very new stuff in Visual Studio world and as young technology it has some problems – like all other new bits and bytes in the world. As you saw then making our contracted code testable is easy only to the point when pre-conditions are considered. When we start dealing with post-conditions we will end up with hacked tests. I hope that future versions of code contracts will solve error handling issues the way that testing of contracted code will be easier than it is right now.

Search Results

Search found 79791 results on 3192 pages for 'design problem'.

Page 1315/3192 | < Previous Page | 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 | Next Page >

- by joel

- by Mat Keep

- by user809526

- by nmarun

- by RoyOsherove

- by LinuxNoob

- by tinuz

- by DigiMortal

- by Matthew Guay

- by Rob Farley

- by Dave Campbell

- by Asian Angel

- by Knut Vatsendvik

- by ferhat

- by nikolaosk

- by David Allan

- by Ratman21

- by chung.wu

- by WeigeltRo

- by sreejukg

- by Michael Stephenson

- by Christopher

- by DigiMortal

< Previous Page | 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 | Next Page >