Search Results

Search found 6887 results on 276 pages for 'internal'.

Page 133/276 | < Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >

• Firewalling gateways and IDS's

  - by Scott Davies

  Hi, For IDS, I plan to have a Win 2008 server running on the gateway with the majority of roles disabled. I plan to firewall the Internet connection, but I'd also like to install Snort to work as an IDS. However, I am guessing that regardless of the Snort install of the promiscuous Winpcap driver, I won't be able to monitor ports that the firewall blocks. My thinking is that chain of flow is: Internet-Firewall on Win 2008-Winpcap-Snort-internal network Is there a way to still monitor services that the firewall will block (i.e. TCP 445 SMB) ? Perhaps run the data through Snort and then through the firewall ? Thanks

  Read the article

• Strange port forwarding problem

  - by rAyt

  I've got a strange port forwarding problem. The port forwarding to my internal webserver (10.0.0.10 on Port 80) works without a problem but the port forwarding to a windows server (10.0.0.15) on port 3389 doesn't work. The port 3389 is open. Any ideas? thanks! #!/bin/sh IPTABLES="/sbin/iptables" $IPTABLES --flush $IPTABLES --table nat --flush $IPTABLES --delete-chain $IPTABLES --table nat --append POSTROUTING --out-interface eth0 -j MASQUERADE $IPTABLES -t nat -A PREROUTING -p tcp -i eth0 -d 188.40.XXX.XXX --dport 3389 -j DNAT --to 10.0.0.15:3389 $IPTABLES -t nat -A PREROUTING -p tcp -i eth0 -d 188.40.XXX.XXX --dport 80 -j DNAT --to 10.0.0.10:80 $IPTABLES -t nat -A PREROUTING -p tcp -i eth0 -d 188.40.XXX.XXX --dport 222 -j DNAT --to 10.0.0.10:22 $IPTABLES --append FORWARD --in-interface eth1 -j ACCEPT

  Read the article

• Understanding DHCP setting for DNS Server Options and Scope Options

  - by Saariko

  I have installed 2 DC's on my network (W2K8 R2) both serve as a replicate DC on my domain. On one of them (DC1) there is also a DHCP server running. On both I have a DNS server running. I am trying to understand the difference in the settings within the DHCP of Server Options and Scope Options. As I understand it: On the server options, I should put an external DNS for system (lets say 8.8.8.8 - google) And on the scope options, I should put both my internal dc1 and dc2 IP's as the server. - which are than distributed to my domain clients. Is that correct? Is there a better way? Do I need to add loopback address as well?

  Read the article

• Setting up dante socks server

  - by skerit

  I want to tunnel all my internet traffic through my vps, so I'm trying to install a proxy server. However: I can't seem to browse the internet through Dante. I get the ERR_EMPTY_RESPONSE error. This is my config: logoutput: stderr /home/user/dantelog internal: eth1 port=1080 external: eth1 method: username pam user.privileged: proxy user.notprivileged: nobody user.libwrap: nobody client pass { from: 10.0.0.0/8 port 1-65535 to: 0.0.0.0/0 } Do I really have to run 2 proxy servers: one for http and one for socks? or is there something else I can do?

  Read the article

• Boot linux off hard drive and then switch to run from usb flash disk

  - by Jesse

  I have an older laptop that I want to use as a simple media server on my home network. I would like to avoid using the internal hard drive except for booting (BIOS does NOT support booting from USB). My thought was to mirror the hard drive (currently has current install of Arch Linux) onto the flash drive and then after booting switch over to run everything from the flash drive. I read the following article about using a RAM disk (HOW-TO: Boot OS into RAM for speed and silence) but ran into problem because the USB subsystem does not seem to be initialized soon enough (I create root and home paritions on the flash disk and modified fstab to pick those - didn't work). Any thoughts?

  Read the article

• Open-source training class/room/instructor resource management software?

  - by Kyle Eli

  We're looking to replace an internal system used for managing training classes with something a bit more robust. Needs to be open-source or have a license level that grants access to source, and needs to be ASP.net (C# preferred, but could live with VB.net) Ultimately, we'll need to be able to assign facilities and instructors, manage attendees, send notifications, and build calendar views. We'll also be integrating with our website to allow on-line sign-up and other things for attendees to manage on their own. We do expect to implement quite a bit of it in-house, but we'd like as broad of a base to start from as we can get. Still, just a really good web-based meeting-room reservation system might make a good enough starting point. In list form: Meeting/training resource management softwareASP.net (C# or VB.net)Source availableWe're expecting to have to modify the software to meet all of our requirements

  Read the article

• AD LDS High availability

  - by user792974

  We are currently using CAS for multiple directory authentication. AD for internal users, AD LDS for external users. I've read that NLB is a possible solution, but wondering if this is possible with SRV records, and how about you would correctly configure that. With our AD directory, I can bind with olddomain.local, and hit any of the DCs in the domain. We don't want to hardcode servernames into CAS, so the end goal is to bind with LDSdomain.gov. nslookup -type=srv _ldap._tcp.LDSdomain.gov returns _ldap._tcp.LDSdomain.gov SRV service location: priority = 0 weight = 100 port = 1025 svr hostname = server01 _ldap._tcp.LDSdomain.gov SRV service location: priority = 0 weight = 200 port = 1025 svr hostname = server02

  Read the article

• Import LDIF file to external server

  - by colemanm

  As a follow-up to my previous question, which I've resolved part of, what we're trying to do now is take an exported .ldif file of the "Users" container on our OS X Server and import it into a separate OpenLDAP server on an EC2 instance. This we'll use for LDAP user authentication of other apps without having to open our internal network to LDAP traffic. The exported .ldif file thinks the DN of the "Users" container is cn=users,dc=server,dc=domain,dc=com. Is it easiest to configure the EC2 OpenLDAP server to think that it's domain is the same so the container is imported to the proper place? Or should we edit the text of the .ldif file to change the DN to match the external naming? Hopefully that makes sense... but I'm confused as to the best way to accomplish this.

  Read the article

• router propogation usng OSPF

  - by liv2hak

  I am using Juniper J-series routers to emulate a small telco and VPN customer.I need to use OSPF so that the path to each internal subnet is propogated to all PE nodes.The network topology is given below. To achieve this I am planning to run the following commands in UOW-TAU and UOW-HAM. set protocols ospf area 0.0.0.0 interface ge-0/0/0 set protocols ospf area 0.0.0.0 interface lo0.0 Do I need to do any additional configuration in TAU-PE1 and HAM-PE1 routers for it to receive the OSPF paths.? I am a beginner at the routing.Any help is appreciated.

  Read the article

• How does Amarok rip Audio CDs (in Ubuntu Lucid)?

  - by Hanno Fietz

  I'm in the process of moving my CD collection into my Amarok library. Mostly, it works great. Sometimes however, the process just hangs forever. The problem seems to occur at random (i. e. often, but not always at the same disk/track) and the consequences range from none (successful after cancel/retry) to Amarok's internal db becoming completely messed up. I would like to investigate and file a proper bug report or find a fix / workaround, but I don't understand how Amarok does the ripping. When all is working, there's a lame process encoding to a temporary file, which appears in my collection once it's finished. When the process hangs, that lame command is still there, but waiting forever for data on stdin, which seems to come from a third process. That seems to be kio_audiocd, but I don't know whether that's correct and what it's supposed to do. What's going on?

  Read the article

• SBS 2008 DNS issues in BPA

  - by evesirim

  I'm gettng constant Critical Issue events in the Small Business Server Best Practices Analyser & resulting SBS Console reports that begin "The DNS client is not configured to point only to the internal IP address of the server.". When I check the DNS Manager, there are two separate IPs listed, one ***.***.***.2 and the other ***.***.***.28. I have checked online after an ipconfig /all and have found the reason for this to be that the second IP is created by DHCP for RAS & VPN purposes. It seems to cause no conflicts of any detrimental result apart from constantly sending me error messages and alerted reports. Does anyone know of a way that I can change settings somewhere so that Windows accepts this second IP, or at least stops alerting me of its prescence? Perhaps a registry hack of some kind...? Many thanks in advance

  Read the article

• Apache vs Lighttpd: Weird behavior in reverse proxy mode.

  - by northox

  Context: I have an Apache server running in reverse proxy mode in front of a Tomcat java server. It handle HTTP and HTTPS and send those request back and forth to the Tomcat server on an internal HTTP port. Goal: I'm trying to replace the reverse proxy with Lighttpd. Problem: while asking for the same HTTPS url, while using Apache as the reverse proxy, the Tomcat server redirect (302) to an HTTPS page but with Lighttpd it redirect to the same page in HTTP (not HTTPS). Question: What does Lighttpd could do different in order to have a different result from the backend server? In theory, using Apache or Lighttpd server as a reverse proxy should not change anything... but it does. Any idea? I'll try to find something by sniffing the traffic on the backend tomcat server.

  Read the article

• Is an Intel Atom D525 suitable to run MythTV

  - by Martin Thompson

  I have an oldish netbook with an Atom N450 (1.6GHz, 512KB cache) - I've been using it to experiment with MythTV, but it seems really slow, even just to work through the menus! Seconds, sometimes 10 or 20s, to load a new menu. Admittedly from a remote backend, but my older Core1 based laptop seems to be fine with the same setup. I was hoping to use one of the so-called "nettop" devices which currently seem to be D525-based (1.8GHz, 1MB cache) - is double the cache really going to make that much difference? Or has the internal architecture of the Atom moved on leaps and bounds in between? Given that I design non-Intel embedded computers for a living I was hoping to get lots of hardcore architecture detail from the Intel website, so I could see for myself, but I can't find it! So: will a D525 be fast enough to run a MythTV backend/frontend combined box?

  Read the article

• IIS 7 + ASP.NET 4

  - by user26712

  Hello, I have an ASP.NET application that I am trying to convert to an ASP.NET 4 application. The application is fairly simple. I have created a new web application in IIS 7.5 pointing to the directory that the ASP.NET application exists in. When I attempt to execute the application, but entering http://localhost%3A%5Bport%5D into my browser, I receive the following error: Error Summary HTTP Error 500.21 - Internal Server Error Handler "PageHandlerFactory-Integrated" has a bad module "ManagedPipelineHandler" in its module list Most likely causes: * Managed handler is used; however, ASP.NET is not installed or is not installed completely. * There is a typographical error in the configuration for the handler module list.

  Read the article

• I need a server or service that reroutes DNS requests

  - by Relentim

  We have two external servers, Dev and Prod. We are a software house and in the code we have a subdomain metrics.company.com that points to Prod. Development is continuous and our internal and external developers and testers will need to switch from Dev to Prod and back again. It is not an option to have a different sub domain in the code during development and change this for production. The way we wish to switch between Dev and Prod is to use DNS. We need a public DNS server that behaves normally apart from routing metrics.company.com to Dev. The users will be able to swap their DNS back and forward to hit the different servers. What is the easiest way to do this? Is there a company that hosts this service or am I going to have to rent a server and set it up myself? Any help would be much appreciated.

  Read the article

• Plesk directory structure problems

  - by johnnietheblack

  I have an entire website with the following directory structure: /example.com /html (public) /css /js index.php /lib session.php other_lib_files.php /views index.php /models /controllers As illustrated, the html is public, and anything above it is private. My site now needs to upgrade servers, and the new server (Linux w/ Plesk) has the following structure (reduced to the problematic parts below): /myplesksite.com /httpdocs /css /js index.php /private /lib /models /views What I would THINK is that I should be able to put my /lib, /views, /models, etc in the directory directly above /httpdocs, the same way I had it in my previous server. Is that possible? Or do I have to put it in private? I would really love not to have to adjust my internal paths throughout the site if not necessary...

  Read the article

• PKI Issuing CA on Domain Controllers

  - by dunxd

  I am setting up a PKI which will initially be used internally. As we may grow our use of this I have opted for a three tier hierarchy - Offline Root and Policy CAs (one Policy CA at the moment for internal use), and online issuing CAs. We had initially discussed using our Domain Controllers as the Issuing CAs rather than setting up dedicated ones. I am now starting to have doubts about whether it is a good idea to have our DCs do certificate issuing. We have less than 1000 users, so our DCs aren't hugely taxed. Does anyone have any suggestions for or against doing this? We are currently running Windows 2003 Active Directory, but will be upgrading to Windows 2008 in the coming year. I'm setting up Windows 2008 PKI.

  Read the article

• How to configure citrix presentation server 4.5 login config

  - by Cory

  Hello, I am a little confused as to something my Citrix Server has been doing. When I login to the web login, (username, password, domain); everything logs in ok and I see all the available application. The problem that I was trying to fix is that when I try to start an application, it asks me to login again to the server that is hosting the citrix server. So, is there anyway to have the initial login credentials pass-through to the server login or skip the server login completely? Side note - I do have pass-through authentication enabled on both my internal and external Citrix site. Thanks for the help! Cory

  Read the article

• GNS3 Cannot ping/resolve DNS record

  - by Eldad Cohen

  I set up an internet lab with GNS3, which has 3 routers, in each node there is a computer directly connected. One of the hosts is a DNS server, Windows 2003 Server. The other one is a Windows XP machine. Ping is good between routers and machines but no ability to ping domain.com record on DNS server 2003. I set a static nat on the router to route all traffic from gateway to the DNS server internal ip address, still no answer for the dns request. Any ideas or thoughts will be most welcome.

  Read the article

• Can't make updates with LDAP from Linux box to Windows AD

  - by amburnside

  I have a webapp (built using Zend Framework - PHP) that runs on a Linux environment which needs to authenticate against Active Directory on a Windows server. So far my webapp can authenticate with LDAPS, but cannot perform any kind of write operation (add/update/delete). It can only read. I have configured my server as follows: I have exported the CA Certificate from my Windows AD server to /etc/opendldap/certs I have created a pem file based on this certificate using openssl I have update /etc/openldap/ldap.conf so that it knows where to look for the pem certificate: TLS_CACERT /etc/openldap/certs/xyz.internal.pem When I run my script, I get the following error: 0x35 (Server is unwilling to perform; 0000209A: SvcErr: DSID-031A1021, problem 5003 (WILL_NOT_PERFORM), data 0 ): Have I missed something with my configuration, which is causing the server to reject making updates to AD?

  Read the article

• RewriteCond in .htaccess file gives me bad flag delimiters

  - by Steven

  I'm upgrading a website and I use this .htaccess file to show maintenance page: #MAINTENANCE-PAGE REDIRECT RewriteEngine on RewriteCond %{REMOTE_ADDR} !^127\.0\.0\.0 # Bogus IP address for posting here RewriteCond %{REMOTE_ADDR} !^127\.0\.0\.0 # Bogus IP address for posting here RewriteCond %{REQUEST_URI} !^/maintenance\.html$ RewriteRule ^(.*)$ http://www.mysite.no/maintenance.html [R=307,L] This opens the maintenance page for all users except the two IP addresses I've added. They get an Internal Server Error. I've used thesame script on another site, and that worked fine. Looking at the error log, I see the following: /var/www/vhosts/mysite.no/httpdocs/.htaccess: RewriteCond: bad flag delimiters If I remove my .htaccess file, I can work with my site just fine. My site is hosted on a VPN using CentOS 5. How can I fix this problem?

  Read the article

• Installing Sql Server 2005 SP2 - Getting error on analysis services component

  - by Greg_the_Ant

  At first many of the components didn't install and I followed this workaround (fixing user/SID mappings in registry.) After that everything installed successfully except for analysis services. I am getting the exact same error message as before on analysis services. (Are there other users installed by sql server I'm not aware of perhaps?) Do you guys have any ideas? All of my searches seem to just point to that workaround above that I already did. Error message from log: Product : Analysis Services (MSSQLSERVER) Product Version (Previous): 1399 Product Version (Final) : Status : Failure Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\OLAP9_Hotfix_KB921896_sqlrun_as.msp.log Error Number : 29528 Error Description : MSP Error: 29528 The setup has encountered an unexpected error while Setting Internal Properties. The error is: Fatal error during installation.

  Read the article

• Apache can't connect to LDAP server

  - by jldugger

  I'm tying SVN to LDAPS by way of Apache. I've run openssl s_client --host $host --port 636 and received an SSL certificate, so it doesn't appear to be a firewall problem. I get the following warning: [Fri Apr 02 07:38:15 2010] [warn] [client <ip withheld>] [590] auth_ldap authenticate: user jldugger authentication failed; URI /internal-svn [LDAP: ldap_simple_bind_s() failed][Can't contact LDAP server] "Can't contact LDAP server" is somewhere between vague and wrong. I'm at a loss on how to continue debugging this. Ideas?

  Read the article

• Running Python scripts in a browser

  - by sunwukung

  I want to start learning Python - and I'm having trouble getting scripts to load up in a browser (using Wamp). So far I've tried the following: 1: add the following lines to httpd.conf: AddHandler cgi-script .py Options ExecCGI I navigate to localhost/path/to/script/myscript.py but get an Internal Server error. 2: downloaded mod_wsgi-win32-ap22py26-3.0.so - renamed to mod_wsgi (running Wamp with Apache 2.2) added the following lines to httpd.conf AddHandler mod_wsgi .py WSGIScriptAlias /wsgi/ "path/to/my/pythonscripts/folder/" but when I navigate to the script - it renders the script in it's entirety i.e. #!c:/Python26/python.exe -u print "hello world" I managed to get CherryPy working, but ideally I want to learn the language in a relatively raw context before digging into a framework. Can anyone give me some pointers?

  Read the article

• Apache2 proxypass

  - by gatsby

  i'm trying to figure out why my apache2 reverse proxy doesn't work... hope someone can clarify. i'm using an apache server as a gateway with proxy pass: 10.184.1.2 is the IP. these are PP instructions i inserted in the 000-default config file. ProxyPass / http://192.168.102.31/ ProxyPassReverse / http://192.168.102.31/ the host 192.168.102.31 is an internal IP of a subnet wich is not reachable directly by clients, but only by the apache gateway. when i try to access such a address: http://apache_gateway_name/dir i see the client trying to reach 192.168.102.31 address and of course timeout occurs. can someone help? Best regards

  Read the article

< Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >