Search Results

Search found 5679 results on 228 pages for 'kill processes'.

Page 133/228 | < Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >

• How can I automatically synchronize a directory tree on multiple machines?

  - by Blacklight Shining

  I have two Mac laptops and a Debian server, each with a directory that I would like to keep in sync between the three. The solution should meet the following criteria (in rough order of importance): It must not use any third-party service (e.g. Dropbox, SugarSync, Google whatever). This does not include installing additional software (as long as it's free). It must not require me to use specific directories or change my way of storing things. (Dropbox does this IIRC) It must work in all directions (changes made on /any/ machine should be pushed to the others) All data sent must be encrypted (I have ssh keypairs set up already) It must work even when not all machines are available (changes should be pushed to a machine when it comes back online) It must work even when the /directories/ on some machines are not available (they may be stored on disk images which will not always be mounted) This can be solved for Macs by using launchd to automatically launch and kill (or in some way change the behavior of) whatever daemon is used for syncing when the images are mounted and unmounted. It must be immediate (using an event-based system, not a periodic one like cron) It must be flexible (if more machines are added, I should be able to incorporate them easily) I also have some preferences that I would like to be fulfilled, but do not have to be: It should notify me somehow if there are conflicts or other errors. It should recognize symbolic and hard links and create corresponding ones. It should allow me to create a list of exceptions (subdirectories which will not be synced at all). It should not require me to set up port forwarding or otherwise reconfigure a network. This can be solved by using an ssh tunnel with reverse port forwarding. If you have a solution that meets some, but not all of the criteria, please contribute it in the comments as it might be useful in some way, and it might be possible to meet some of the criteria separately. What I tried, and why it didn't work: rsync and lsyncd do not support bidirectional synchronization csync2 is designed for server clusters and does not appear to work with machines with dynamic IPs DRBD (suggested by amotzg) involves installing a kernel module and does not appear to work on systems running OS X

  Read the article

• Managing rolling deployments in the cloud

  - by Josh Nankin

  Recently I've been experimenting with various cloud management tools like RightScale, Scalr, custom scripts for managing a variety of servers, each hosting several roles (app, db, load balancer, job queues, etc). The one thing I find lacking in most solutions is a way to do rolling deployments, i.e. running deployments sequentially across a number of servers with the same role. For instance, I dont want to build all of my webservers at the same time, as that will almost definitely result in some down time or 500s for my customers. I'd rather have one or two servers build at a time, while other servers are still available to handle requests. The other alternative is obviously to launch new servers that automatically update themselves on boot, but this isn't as cost effective, and most likely requires more time for the build to complete (it's faster to build on an existing server than to launch a new server and kill old ones). We've all heard of the big companies having the famous "push to build" button (companies like Twilio, Etsy, etc.) but it seems that they all have custom implementations of this. I'm not talking about a simple ssh-loop, clusterssh, or even an mcollective - I preferably want something with a nice simple interface that allows me to specify something like a RightScript or a Scalr script to run on a set of servers with a specific role, and it builds them sequentially. Does any one know of easy ways to get this done, or is this a candidate for a new open source project?

  Read the article

• SQL Server backup and restore process

  - by Nai

  Just wondering what backup processes you guys have. I am currently operating a weekly full database backup with daily differential backups. My understanding is that with such a set up, the difference between Full recovery mode and Simple recovery mode is that with Full recovery mode, I will be able to use the transaction logs to rollback my DB to a specific point in time having applied the latest differential backup. Assuming that in my scenario, the last differential backup serves as my last and ultimate 'save point', I don't see a need to rollback my DB even further back using the logs. This brings me to my question: Is there any additional benefits to be had using a Full recovery mode for my current backup process?

  Read the article

• How to run django on localhost with nginx and uwsgi?

  - by user2426362

  How to run django on localhost with nginx and uwsgi? This im my config but not works. nginx: server { listen 80; server_name localhost; access_log /var/log/nginx/localhost_access.log; error_log /var/log/nginx/localhost_error.log; location / { uwsgi_pass unix:///tmp/localhost.sock; include uwsgi_params; } location /media/ { alias /home/user/projects/zt/myproject/myproject/media/; } location /static/ { alias /home/user/projects/zt/myproject/myproject/static/; } } uwsgi: [uwsgi] vhost = true plugins = python socket = /tmp/localhost.sock master = true enable-threads = true processes = 2 wsgi-file = /home/user/projects/zt/myproject/myproject/wsgi.py virtualenv = /home/user/projects/zt chdir = /home/user/projects/zt/myproject touch-reload = /home/user/projects/zt/myproject/reload This config work on my ubuntu server with normal domain (not localhost) but on localhost not working. If I run localhost in web browser I have Welcome to nginx!

  Read the article

• How to create a new background process in a KSH "while read" loop?

  - by yael

  The following test script has a problem. When I add the line (sleep 5 ) & in the script then the "while read" loop does not read all lines from the file, but only prints the first line. But when I remove the ( sleep 5 ) & from the script, then the script prints all lines as defined in the file. Why the ( sleep 5 ) & causes this? And how to solve the problem? I want to create a new process (for which the sleep is just an example) in the while loop: $ more test #!/bin/ksh while read -r line ; do echo Read a line: echo $line ( sleep 5 )& RESULT=$! echo Started background sleep with process id $RESULT sleep 1 echo Slept for a second kill $RESULT echo Killed background sleep with process id $RESULT done < file echo Completed On my Linux, when using the following contents of file: $ more file 123 aaa 234 bbb 556 ccc ...running ./test just gives me: Read a line: 123 aaa Started background sleep with process id 4181 Slept for a second Killed background sleep with process id 4181 Completed

  Read the article

• linux migration/N high cpu consumption

  - by Alexander

  on my linux appliance based on 3.0.0-14 kernel I got: RPN:/tmp# ps axuf | grep migration root 6 92.9 0.0 0 0 ? S Apr23 2788:33 \_ [migration/0] root 7 99.7 0.0 0 0 ? S Apr23 2993:20 \_ [migration/1] my top is RPN:/tmp# top -b -n1 top - 12:03:41 up 2 days, 2:18, 5 users, load average: 25.76, 25.26, 24.73 Tasks: 171 total, 1 running, 168 sleeping, 0 stopped, 2 zombie Cpu(s): 14.0%us, 12.6%sy, 0.8%ni, 72.0%id, 0.3%wa, 0.0%hi, 0.3%si, 0.0%st Mem: 1543032k total, 1264728k used, 278304k free, 25308k buffers Swap: 0k total, 0k used, 0k free, 183168k cached My question: why processes "migration/N" take so much CPU?

  Read the article

• Firefox, Thunderbird, Safari - hangs up on start

  - by takeshin

  I have a strange problem on Windows Vista (Automatic updates). Long time ago I had installed Firefox, Thunderbird, Safari and Opera and they all worked well. Once upon a time, after Windows restart, Firefox, Thunderbird and Safari won't start. [Opera (USB) works fine]. When I start the browser, program name is listed on the processes list, but it is not activated, doesn't show any window. I tried crating new profiles with -ProfileManager, restarting Windows, reinstalling the browsers. I scanned the system for suspected programs and it looks clean. There is 45GB of free HDD space. WTF?

  Read the article

• Memory limit on PHP + Apache + Windows 32 bit?

  - by thkala

  I am considering using Apache 32-bit for a Moodle installation on a Windows 2008 R2 64-bit/16GB server. Since the available memory affects the number of concurrent of users that can be served, I was wondering how the 2GB memory limit on 32-bit Windows processes affects Apache+PHP. Is it a collective limit for the whole server, or is it applied separately for each Apache child process/thread? If it is separate, how many of those children are launched on Windows? One per request? One per processor core? Something in the middle? Is this somehow configurable?

  Read the article

• How do you set max execution time of PHP's CLI component?

  - by cwd

  How do you set max execution time of PHP's CLI component? I have a CLI script that has gone into a infinite loop and I'm not sure how to kill it without restarting. I used quicksilver to launch it, so I can't press control+c at the command line. I tried running ps -A (show all processes) but php is not showing up in that list, so perhaps it has timed out on it's own - but how do you manually set the time limit? I tried to find information about where I should set the max_execution_time setting, I'm used to setting this for the version of PHP that runs with apache, but I have no idea where to set it for the version of PHP that lives in /usr/bin. I did see the follow quote, which does seem to be accurate (see screenshot below), but having an unlimited execution time doesn't seem like a good idea. Keep in mind that for CLI SAPI max_execution_time is hardcoded to 0. So it seems to be changed by ini_set or set_time_limit but it isn't, actually. The only references I've found to this strange decision are deep in bugtracker (http://bugs.php.net/37306) and in php.ini (comments for 'max_execution_time' directive). (via http://php.net/manual/en/function.set-time-limit.php) ini_set('max_execution_time') has no effect. I also tried the same thing and go the same result with set_time_limit(7).

  Read the article

• All FireFTP passwords gone after auto-update

  - by GitaarLAB

  For the last six months (since the Firefox madness started and they keep on taking control of my PC) I'm terrified to touch Firefox. Problem is however, I've been using it in my business (since once upon a time it was a trustworthy application with useful extensions like FireFTP) and that installation (and plugins) holds four years of information. So Firefox continually deletes my important data (by) messing up (or blocking/or worse: auto-updating) my plug-ins, even crashing my computer as a result. Today Firefox killed FireFTP by (again) autoupdating FireFTP without my permission, and I did my best to disable that nonsense in about:config). Result: none of the (over 100) FireFTP accounts can be logged on to, they suddenly all ask for a password. I do not have the time to to find all of the passwords and reconfigure FireFTP again. How can I undo the mess Firefox created once again? That is, where are the passwords, how do I downgrade? As a side-question, how can I make Firefox behave again? I'm the boss of my computer, not them! How can I once and for-all take back control and completely kill every kind of auto-update feature?

  Read the article

• MySQL will Stop working after being Started

  - by user115343

  i am new to a webserver thing. I use Centmin mod to install nginx + mariaDB to setup small wordpress blog,the first day it is ok,there are nice "hello world" on my box's IP,but today i have checked that mysql is stop working so i immediately start it again but it is stoped again after some minutes! i use this tutorial but still,it will stop after some period here is my log [root@rylai ~]# tail -f /var/log/mysqld.log 120326 16:19:05 [Note] Plugin 'PBXT_STATISTICS' is disabled. 120326 16:19:05 [Note] Plugin 'InnoDB' is disabled. 120326 16:19:06 [Note] Event Scheduler: Loaded 0 events 120326 16:19:06 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.2.10-MariaDB-mariadb107' socket: '/var/lib/mysql/mysql.sock' port: 3306 (MariaDB - http://mariadb.com/) 120326 16:20:36 mysqld_safe Number of processes running now: 0 120326 16:20:36 mysqld_safe mysqld restarted 120326 16:20:39 [Note] Plugin 'ARCHIVE' is disabled. 120326 16:20:39 [Note] Plugin 'FEDERATED' is disabled. 120326 16:20:40 mysqld_safe mysqld from pid file /var/lib/mysql/rylai.pid ended I only access mysql on CLI,didnt install any panel yet

  Read the article

• Site hanging in iis7 - how do I troubleshoot?

  - by Chris Foot

  I am currently having a problem with a windows 2008 server running IIS 7. The server runs several sites but only seems to have the issue with one particular site. Every so often, the whole server slows to a crawl with nearly all requests timing out! Invariably, when we log in to take a look there is always an IIS process using up around 90% cpu. Looking into the worker processes in IIS there are usually one or two requests that have been running for a long time. They are always in the ExecuteRequestHandler state with ManagedPipeline as the module name and the current ones i'm looking at have been running for 7686248 (what units is this in, it doesn't say?). It is also not always the same page, in fact we have seen at least 3 different pages listed under url when this has happened. It seems that the only way to bring the server back to life is to kill the 90% process! The site is running under .Net 4.0 and the code on it is very similar to other sites on the server which do not have the problem! How do I start troubleshooting this?

  Read the article

• Windows XP Loading Problem

  - by Sadeq Dousti

  Sometimes, my Windows XP does not load correctly. It shows the login screen, and when I click my username, it load the desktop background, but the Explorer does not show up. So, I cannot see the icons on the desktop, the start menu, etc. If I press Ctrl+Alt+Del to show Task Manager, I can run programs (like media player or browser) from File--New Task (Run...). Also, in the Task Manager, I see Explorer.exe running. I tried to kill and re-run it, but nothing happens. I used Sysinternals Process Explorer to see if there were any odd process or odd behavior, but nothing was fishy. After several restarts, the system finally worked as expected. But this is not permanent: Sometimes, when I restart the system, it works just as described above (Explorer does not show up). But sometimes it works normally. I used Kaspersky to search for viruses, but nothing showed up. I think the info presented above is not enough to pinpoint the problem. Yet you might be able to tell me about a tool or something, which I can use to give you more info, or even solve the problem. PS: I can easily use the Safe Mode. It does not seem to suffer from this problem. Hence, I suspect there's some process (service) for which Explorer is waiting, but that process runs into trouble (say a race ondition, or an infinite loop) and so Explorer stalls as well.

  Read the article

• monitor just what's going on -on a firewall

  - by bbutle01

  I have this little snapgear firewall. It's a little purpose built box running a custom linux, SH4 processor @240 Mhz, 64MB of ram. Basically how close we are to capacity is a mystery to me. I know I can run top and see the status of all the processes, but how can I see just how much of the processor is going to passing data... and how to estimate when I'm going to need to upgrade, and by tweaking iptables rules, how does that help/hurt the processor. suggestions?

  Read the article

• Automatically cycle numerous or large files to the trash

  - by minameismud

  I've been tasked with fixing a vendor's program that, under certain conditions, dumps gigs of junk files into a log directory. It ends up filling users' machines. My task is to figure out how to make it stop without any source code or additional running processes, and without making the program kasplode. In other words, I'm looking to use a feature of the file system to control the growth. One idea I had was to make a hard link from that folder to NUL, as you might with /dev/null in the linux world. However, my attempts to use the mklink program to create a junction result in a message that says Local volumes are required to complete the operation. Any ideas on how to complete the junction, or other ideas to solve the problem?

  Read the article

• Mac OS X Terminal.app Ubuntu 9.10 SSHD and incorrect keyboard mapping

  - by Jesse

  Does anyone have any Idea how to handle this? I can't stand connecting to certain Ubuntu boxes via Mac OS X because of issues with keyboard layout etc. I have set TERM=vt100 and TERM=xterm-color in Ubuntu .bashrc and also in the Terminal.app advanced preferences and nothing seems to fix this issue. Trying to use arrow keys on slim silver keyboard results in ^[[A etc. From Answer OS X 10.6.4 When I try to run /lib/terminfo/x/xterm-color I get permission denied? Maybe this is the issue?! Regular bash login shell. If I sudo often it works. Which leads me to believe the above permissions problem is the cause. Output from stty -a: $ stty -a speed 9600 baud; rows 47; columns 181; line = 0; intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = M-^?; eol2 = M-^?; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; flush = ^O; min = 1; time = 0; -parenb -parodd cs8 -hupcl -cstopb cread -clocal -crtscts -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon -ixoff -iuclc ixany imaxbel -iutf8 opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 isig icanon iexten echo echoe -echok -echonl -noflsh -xcase -tostop -echoprt echoctl echoke

  Read the article

• Are there any tests I can run on a network to simulate 100 heavy network users?

  - by marc.gayle

  I will be hosting a Ruby on Rails workshop at a small hotel in the near future, and while they have 'Wifi' everywhere on the property, and the property normally hosts 150 - 300 people, I am not 100% confident that they have hosted 150 tech people that tend to have heavy web surfing habits/needs. Their tech department is also 1 or 2 guys. Are there any automated tests I can download and run from my laptop, on the network, that would simulate 100 'heavy users' on the network at the same time? Their broadband pipe is a 15mbps cable connection. Would that suffice for the general surfing needs of 100 - 150 techies? I know all it takes is 1 or 2 bit torrenters to kill the entire network, but assuming we can at the very least block those ports or encourage the attendees not to file share on the network, would that speed suffice for general surfing needs? What are good resources online that would allow me to quickly get up to speed on the IT related issues, so that I can ask their sysadmins the right questions? Edit: Note that I am fairly technical, so assume I can get up to speed quickly even with technical manuals, etc.

  Read the article

• How to let users change linux password from web browser?

  - by wag2639

  I'm not sure if this is a stackoverflow question or serverfault but here goes: I have an Ubuntu 10.04 file server (Samba/FTP/HTTP) and I would like to have the ability to give users the ability to change their password to the server using their web browser. I've written a similar script before using PHP and a mess of exec but I believe that isn't secure because it can be listened to by someone looking at the list of processes on the server. Is there some kind of plugin (PHP or Python or other) that can do this easily? I rather not use something like webmin as it's overkill for this.

  Read the article

• Mongo daemon restarts after replica set issue

  - by Matt Beckman

  We had a recent election in our replica set (2 read nodes; 1 write node) that changed the primary node. Curious as to why this occurred, I started looking through the logs to find out what happened. It appears that mongoNode2 could not communicate with mongoNode3. When both nodes could not communicate, it appears that this caused the services on mongoNode2 and mongoNode3 to restart, eventually resulting in a new primary after the services had been started again. Thu Jun 23 08:27:28 [ReplSetHealthPollTask] DBClientCursor::init call() failed Thu Jun 23 08:27:28 [ReplSetHealthPollTask] replSet info mongoNode3:27017 is down (or \ slow to respond): DBClientBase::findOne: transport error: mongoNode3:27017 query: { \ replSetHeartbeat: "myReplSet", v: 3, pv: 1, checkEmpty: false, from: \ "mongoNode2:27017" } Thu Jun 23 08:27:29 got kill or ctrl c or hup signal 15 (Terminated), will \ terminate after current cmd ends Thu Jun 23 08:27:29 [interruptThread] now exiting Thu Jun 23 08:27:29 dbexit: Is there any reason that the mongo service would restart due to a DBClientCursor::init call() failure? Is this a known bug? It should be noted that mongoNode2 and mongoNode3 are VMs on the same VMware host. MongoNode1 is not on the same host, and it did not have any issues with the service. However, I did not have any other reports of issues with other VMs on the VMware host.

  Read the article

• Windows 7 Blank Screen on Boot / Login

  - by Greg

  I have a new system that's having a few problems... sometimes (seems to be when the PC is cold, i.e. has been switched off for a while, though that could be my imagination) I get a blank blue screen when I boot up. The system boots normally and auto-logs-in. The desktop loads and I'm even able to launch applications, but then everything disappears and the screen goes to the default windows desktop blue colour (not the desktop image, just a plain blue with no mouse cursor). At this point the machine completely locks up - I'm unable to even toggle Num Lock and have to hold in the power button for 5 seconds to kill it. Interestingly if I manage to launch some applications before it goes blank, they will usually crash... sometimes explorer.exe will crash too. When I reboot, the system is fine and stable. I've installed the latest graphics drivers and run memtest86+ for 6 passes (and counting) with no errors. The system specs are: CPU: Intel I7 2.66 @ 3.4GHz RAM: 6GB (3 * 2GB DDR3) HDD: 128GB Crucial M225 SSD Motherboard: Gigabyte EX58-UD3R Gfx: ATI Radeon Sapphire 5870 1GB Note: There are a few similar questions but I haven't found one that matches my symptoms

  Read the article

• TCP Keepalive and firewall killing idle sessions

  - by Carlos A. Ibarra

  In a customer site, the network team added a firewall between the client and the server. This is causing idle connections to get disconnected after about 40 minutes of idle time. The network people say that the firewall doesn't have any idle connection timeout, but the fact is that the idle connections get broken. In order to get around this, we first configured the server (a Linux machine) with TCP keepalives turned on with tcp_keepalive_time=300, tcp_keepalive_intvl=300, and tcp_keepalive_probes=30000. This works, and the connections stay viable for days or more. However, we would also like the server to detect dead clients and kill the connection, so we changed the settings to time=300,intvl=180,probes=10, thinking that if the client was indeed alive, the server would probe every 300s (5 minutes) and the client would respond with an ACK and that would keep the firewall from seeing this as an idle connection and killing it. If the client was dead, after 10 probes, the server would abort the connection. To our surprise, the idle but alive connections get killed after about 40 minutes as before. Wireshark running on the client side shows no keepalives at all between the server and client, even when keepalives are enabled on the server. What could be happening here? If the keepalive settings on the server are time=300,intvl=180,probes=10, I would expect that if the client is alive but idle, the server would send keepalive probes every 300 seconds and leave the connection alone, and if the client is dead, it would send one after 300 seconds, then 9 more probes every 180 seconds before killing the connection. Am I right? One possibility is that the firewall is somehow intercepting the keepalive probes from the server and failing to pass them on to the client, and the fact that it got a probe makes it think that the connection is active. Is this common behavior for a firewall? We don't know what kind of firewall is involved. The server is a Teradata node and the connection is from a Teradata client utility to the database server, port 1025 on the server side, but we have seen the same problem with an SSH connection so we think it affects all TCP connections.

  Read the article

• High memory utilization by sqlservr.exe process

  - by abdul samad

  Sub:High memory utilization by sqlservr.exe process. When I look into task manager --processes or by using perfmon memory counters(Sqlserver:memory manager:Target server memory and Total server memory) I am getting high memory utilization by sqlservr.exe process nearly 8 GB (Target server memory counter) and 7.95 GB (Total server memory). and when I restart the MSSQLSERVER service it again shoots up to the same size. I am getting this issue quite frequently. Please help me out in identifying why sql server is using so much memory and how to find out what query , stored procedure etc is making sql server use that much memory. * I am not using any triggers or cursors in my code. Thanks

  Read the article

• How do I lower idle cpu usage in ubuntu linux? Gnome or KDE Variants

  - by Jasen

  My question comes from a kde desktop currently, but it also happens with the gnome instance. When just sitting there, with only the cpu monitor widget running. no open windows, no background processes other than the desktop, my cpu is at ~20%. I wanna know how to fix this, and possibly get better performance out of it. When running my windows side, the cpu will sit at zero, and i generally load new programs about 400ms faster. With windows 7 being as slow as it is, this is not acceptable. and the widget is only set to check every 500ms, so im almost completely sure its not the widget. My system is a Gateway nv 53 amd 2.0 ghz turion with 4 gb of installed ram, and 500 gb hd. both linux and windows are 64 bit. average ram use on either system is about 1.4 gb for just the os

  Read the article

• Apache - mod_pagespeed freezes my website

  - by Jonathan Rioux

  I have installed the mod_pagepseed module for Apache. I am using Debian so I downloaded the .deb file, and installed it successfully. I then configured some filters, and it worked like a charm for some minutes. Then after something like 10 minutes, my website no longer responded to the requests. When I was requesting for my website, it said "Waiting for www.blablabla.com" and I never got the page back from the server. I checked the processes running on my Debian box with top -d 0.5, and nothing eats up the CPU. To make my website responding to requests again, I must do a /etc/init.d/apache2 restart. And then it works again with mod_modspeed applying it's filters for a couple of minutes, and no more response again. How can I diagnose this issue? Is there some other configurations in the mod_pagespeed.conf file that I must set?

  Read the article

• My server appears to have been hacked+ scanssh run by zabbix is it normal?

  - by Niro

  I'm running a few EC2/Scalr instances with zabbix monitoring. I received complaints about one of my servers port scanning other servers. the logs show it is accessing port 22 on consecutive IP addresses. I looked at the processes list and saw scanssh is running under the user Zabbix. My question is- Is scanssh part of zabbix? Is it suppesd to run? I have active autodiscovery on zabbix but it is looking at another IP addresses and definately not port 20. Is it possible that something in the config of zabbix agent is controlling it and not the settings on zabbix server? What can I do to find out if zabbix is somehow misbehaving or it is a hacker? Any advice is highly appreciated.

  Read the article

< Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >