Search Results

Search found 49320 results on 1973 pages for 'system architecture'.

Page 1337/1973 | < Previous Page | 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344  | Next Page >

• Why has my Mac been running fsck_hfs for two days now?

  - by Nate

  I first noticed that fsck_hfs was running, taking up 50-75% of a CPU, yesterday. It continues to run today. ps shows that it is doing /sbin/fsck_hfs -f -n -x -E /dev/disk3. Only problem: I don’t think I have a /dev/disk3. Why is it running? Will it ever finish? Can I kill it? What is /dev/disk3? Could it be my Time Machine volume, which is not mounted at the moment? System Info: MacBook Pro (2008). It has two disks installed—the internal disk (/dev/disk1) and a PC Card SSD (/dev/disk0, surprisingly). It connects to a remote Time Machine volume attached to an Airport Extreme base station.

  Read the article

• How to recover Windows Vista product key?

  - by empi

  Two years ago I've bought asus laptop with Windows Vista preinstalled. I also received recovery dvd with it. Now, I want to reinstall Windows and fully format the hard drive. However, the sticker with Windows product key under the laptop is unreadable. I tried recovering the key with ProduKey and similar software but they show another product key - it is different than the one from the sticker (I checked on another asus laptop and on my dell laptop). Do you know if I it is possible to reinstall the operating system with the product key obtained from ProduKey? If not, how can I retrieve the product key? It seems stupid that it was only placed on the sticker that is destroyed after some time if you frequently hold the laptop on your lap. I've tried ProduKey and Recover Keys and they show the same key. However, it's not the one from the sticker. Thanks in advance for help.

  Read the article

• My Portable Hard Drive with USB3 didn't work when connected to My Laptop, but it working with USB2 properly

  - by Mohammad Hasan Esfahanian

  I have Western Digital My Passport Essential Portable Hard Drive with USB3 and Model:WDBACY5000ABK-EESN. Until about two or three months ago when I connected that to My Laptop USB3 port, that worked very well. But now when I'm connecting that to My device, The system does not detect any Hard Drives. When plug in the USB2 port is working properly. I connected that to another Laptop whit USB3 port but I had the same problem. I tested My Laptop port with a Flash Memory by USB3 and ports were healthy and I'm sure they are working. For this issue, I changed the windows, but it still did not work. What can I do? Thanks in advance.

  Read the article

• Multiple Graphics Cards on Fedora 15 (Gnome 3)

  - by Michael

  I have the (delightful) misfortune of having 3 graphics cards. They are XFX Radeon 5750s. Each drives 2 monitors via dvi. I am having a really hard time getting these running on fedora 15 (gnome 3). So my setup is 3 columns of 2 monitors (the upper monitor is mounted upside down in each column to reduce the bezel between monitors). When the (graphical) login screen comes up all 6 have the blue stripey background that must be the default, but then when I login, things get interesting. In the xorg.conf below, you will see only 2 of the screens in the serverlayout while the other 4 are commented out. Logging in with only 2 of the screens active works well (and it even remembers that the top one is upside down, and should be considered above the lower, i am not sure where it stores this info, but i set it using the graphical "Displays" settings) However, as soon as I uncomment a third screen, or more, it gives me an error message when I login. It's one of those friendly, less helpful messages (Oh no! Something has gone wrong. A problem has occurred and the system can't recover. Please log out and try again). If i do not use an xorg.conf, then the "Displays" prefs pane shows only the two monitors on one of my graphics cards Thanks to anyone who can help me get going! (xorg.conf and then lspci below, and xorg log) xorg.conf Section "ServerLayout" Identifier "X.org Configured" Screen "Screen0" 0 0 Screen "Screen1" Below "Screen0" # Screen "Screen2" RightOf "Screen0" # Screen "Screen3" RightOf "Screen1" # Screen "Screen4" RightOf "Screen3" # Screen "Screen5" RightOf "Screen4" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "catalogue:/etc/X11/fontpath.d" FontPath "built-ins" EndSection Section "Module" Load "record" Load "dri" Load "dbe" Load "extmod" Load "dri2" Load "glx" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor2" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor3" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor4" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor5" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" Identifier "Card0" Driver "radeon" BusID "PCI:4:0:0" EndSection Section "Device" Identifier "Card1" Driver "radeon" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Card2" Driver "radeon" BusID "PCI:6:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Card0" Monitor "Monitor1" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Card1" Monitor "Monitor2" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen3" Device "Card1" Monitor "Monitor3" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen4" Device "Card2" Monitor "Monitor4" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen5" Device "Card2" Monitor "Monitor5" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection lspci output follows [tgm@tgm ~]$ lspci 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 3 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 02:00.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 03:00.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 03:02.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 04:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 04:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 05:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 05:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 06:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 06:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) xorg log (posted to fpaste due to how long it is. thanks to marcusw for the request) http://www.fpaste.org/r5ww/ xorg log with all 6 monitors enabled in xorg.conf (they all turn on and have blue, but then one gets the aforementioned user-friendly error message). http://www.fpaste.org/X63H/

  Read the article

• Establish connection with an IP camera behind a modem-router assigned with a private IP by Internet Service Provider?

  - by silvernightstar

  Most solutions out there require the modem-router to have been assigned a public IP by the ISP. After which, one can access the IP camera via a portforward setting on the router. However, my ISP only provides private IPs internal to their system (they probably have a limited pool of public IPs). So I am unable to view my IP cameras in the way described. I'm wondering if there's a way to work around this problem without having to need a public IP. Since, after all, two users on Yahoo Messenger or Facebook Chat are able to find one another and exchange data despite both sides being within the internal networks of their respective ISPs. Given that I only plan to view my IP cameras via iOS or Android running on a smartphone or tablet, any ready-to-use solutions out there?

  Read the article

• PDAnet on Android IP on PC is not public IP. Where does the NAT take place, PDAnet or Verizon?

  - by lcbrevard

  When using PDAnet on a PC (Win7 ultimate) to USB tether a Motorola Droid on Verizon 3G the IP address of the PC appears to be public - 64.245.171.115 (64-245-171-115.pools.spcsdns.net) - but connections show as coming from another public IP - 97.14.69.212 (212-sub-97.14.69.myvzw.com). Someone is performing Network Address Translation - either PDAnet or within the Verizon 3G network. Can someone tell me who is doing the NAT? Is it PDAnet or is it at Verizon? Is there any possibility of setting up port forwarding, such that connections to the public IP 97.14.69.212 (212-sub-97.14.69.myvzw.com) are forward to the PC? We are testing a network protocol that requires either a true public IP or forwarding a range of ports from the public Internet to the system on which the software runs (actually Linux hosted by VMware Player or Workstation on a PC running Windows).

  Read the article

• Win Server 2008: Task Scheduler runs programs twice or late

  - by SomeName

  Hi, I need to restart a service every day. I have logon hours restricted at 3:00 am, and the server will logout existing TS connections. I have two tasks scheduled: "Daily At 3:20 am every day" "start a program" "c:\windows\system32\sc.exe stop myservice" "Daily At 3:22 am every day" "start a program" "c:\windows\system32\sc.exe start myservice" I came in today to notice that the service wasn't running. I've been digging in logs, and found these entries: For stop task, history: a) 3:29:35 am: Action Completed (sc result code 0) b) 3:20:00 am: Action Completed (sc result code 0) For start task, history: a) 3:29:35 am: Action Completed (sc result code ERROR_SERVICE_ALREADY_RUNNING 1056 (0x420)) b) 3:22:01 am: Action Completed (sc result code 0) Checking event logs shows me: a) 3:29:35 am, Application log, Source myservice, "The service was stopped" b) 3:29:25 am, System log, Source Service Control Manager, "The myservice service entered the stopped state" So, What would have caused both tasks to run at 3:29 am? Why don't I see a message from the SCM saying that the service entered the running state? Is this the preferred way to do this? Thanks!

  Read the article

• Is there a way to rsync in batches?

  - by Chris

  I have a huge chunk of data (11G) in a subversion repository that I'm using rsync to migrate to Alfresco, which lucene indexes new files as they hit the file system. I'm using a dav mount as a proxy to allow me to rsync. The issue I'm having is the indexing post-rsync is quite an expensive operation for such a huge chunk of data, so I was wondering whether there's a way I could logically separate the rsync into identically-sized batches (say 500MB each) so I could schedule them in cron. At the moment, I'm traversing the top level folders and taking the smallest ones across first, but once I'm done with those, the much larger sub-directories are going to be quite troublesome. Please let me know if you need any further info. Thanks in advance.

  Read the article

• Making audio CDs en mass - Linux based solutions?

  - by The Journeyman geek

  My mom's sings and gives away cds to people. Invariably it falls to me to have to burn cds for her, and burning 50-100 cds on a single drive is a pain. I DO have a handful of cd burners and a slightly geriatric old PIII 450. This is what i want to be able to do - either point an application at a folder of WAV or MP3s, say how many copies i need on CLI (since then i can SSH into the system and use it headless) feed 2 or more CD burners cds until its done, OR pop in a single CD into a master drive and have its contents duplicated to 2 or more burners. I'd rather have it running on linux, be command line based, and be as little work as possible - almost automatic short of telling it how many copies i want would be ideal. I'm sure i'll have people wondering about legality - My mom sings her own music, and its classical, and older than copyright law, so, that's a non issue. I just want a way to make this chore a little easier, short of telling my mom to do it herself.

  Read the article

• Not enough storage is available to process this command

  - by Mohit

  I am getting this error on almost all of the operations on a Windows 7 pro 32 bit machine. By operations I mean anything I do. Update a repo from subversion. Access a local IIS Site. Copy a big folder. Run an installer.and sometime if I try again. It get solved. I think there is something wrong wit windows7 . I searched around and found posts suggesting to increase IRPStackSize value in registry I did that no Luck. I am using Microsoft Security Essentials Version: 1.0.1961.0 as my antivirus package Once this errors starts popping up. I have to restart and then in after some random time. It starts showing up again. Any help is appreciated. I am losing lot of my time in restarting my system or retrying again and again.

  Read the article

• [Linux] Bind/map Character to alt+[some key]?

  - by Paul

  OS: Ubuntu In programming and various terminal programs (Screen, Vim) the [, ], { and } tends to be used a lot. I'm using a Norwegian keyboard where these are placed such that I have to stretch my fingers a bit too long for whats comfortable. To make it easier I though I'd try to make alt+[some key] be one of these characters. Is there a way that I can bind, say alt+æ (Norwegian letter) to '{' system wide? Btw, is such thing called binding, mapping or something else? I'm getting a bit confused by the terms... :)

  Read the article

• Two keyboards - one qwerty one dvorak. Can windows use both simultaneously?

  - by Alain

  Similar to this question: Is it possible to use multi keyboards with multi keyboard layouts simultaneously? - I have two keyboards plugged in simultaneously. Both are querty keyboards, but I've rearranged the keys on one to be a dvorak layout. I'd like to find some way to configure windows (XP) such that while both keyboards are plugged in, typing on each results in it's respective layout. I'd prefer if there was someway to have the system automatically use the desired layout based on which USB keyboard it is receiving input from. If no such solution is possible, I would settle for a fast way of switching between US English and US English Dvorak languages so that in a pinch I can easily go from one to the other. Thanks.

  Read the article

• Why does my iTunes use so much CPU time?

  - by bikesandcode

  I have a roughly 2 year old Macbook (10.5). I have iTunes 10. When iTunes is playing MP3s, I see CPU usage of the iTunes process in the system monitor ranging from 65%-75%. When I pause the music, I see CPU usage of about 65%-75%. I do not have any visualisations going, to my knowledge I have not turned on any CPU destroying features, my music library isn't tiny, but it's hardly huge (3GB). This is mildly annoying when I'm plugged into the wall as I only have slightly longer compile times, but if I am out and about, this is a major drain on the battery. Using VLC I see CPU loads of ~= 10% at the most when listening to music and generally lower. What the heck is iTunes doing?

  Read the article

• Manual TRIM Windows 7 on OCZ VERTEX 2 SATA II 2.5" SSD

  - by INTPnerd

  I have an OCZ VERTEX 2 SATA II 2.5" SSD with Windows 7 Professional installed on it. I am pretty sure TRIM is not working because my motherboard is the Asus M2N-SLI (not the Deluxe model) which does not support AHCI mode for the drive. Is there a utility that is compatible with this drive that I could possibly run once a day that would do something similar to a manual TRIM in order to keep the drive performance up? I could not find one specifically for this drive on the OCZ website. I did find a User-Initiated Garbage Collection wiper tool, but it is for a Vertex drive not Vertex 2. I tried to run it, but it said that wiper could not be run for all the drives on this system.

  Read the article

• mac & windows backup solutions - Offsite Backups

  - by Kristiaan

  Im looking for some advice on a system Im looking to impliment within our company, but so far I have not found an adequate solution too. I need to provide my users with a way to backup there laptops whilst in the office and if possible offsite as well, we have a mixture of Windows & Mac laptops so software should ideally be multi platform. This is the first time i am attempting to-do something like this as we normally charge the users with responsibility for their backups. I have ruled out most of the services like dropbox, sugarsync (unless one exists that does this) as whilst they does exactly what I want it does not give me any control over restoring / recovering data in the event of the user being unavailable, as it requires their account password to access data.

  Read the article

• Cannot add Windows 7 client to SBS 2008

  - by Sandokan

  I have just installed SBS 2008 R2 Standard on VMware Workstation 9 along with Windows 7 Pro N. Both are activated and running fine. I have followed the steps to configure SBS 2008 and am now at the point where I'm to add a computer to the domain. Here is where the problem begins. I have gone through the steps of using the webinterface. On the client I downloaded Launcher.exe. I then run it and get the error "Check computer requirements - Failed" (translated from swedish): "This computer doesn't reach the requirements for connecting to the network." "The computer doesn't reach the maximum requirements for the operating system with regards to connect to the network" The provided link for More information only leads to a general supportpage and doesn't handle this specific error. I have also checked the time settings and they are correct. Any clue as to what this problem could be?

  Read the article

• Verifying Time Machine backups

  - by jtimberman

  I'm preparing my system for a Snow Leopard upgrade, and I prepare for the worst case scenario: full reinstall and restore. I would like to verify that my Time Machine backups are valid, and will restore correctly. My Time Machine backups go to a Linux server running Netatalk, and the backups complete successfully. How do I do a test restore to an alternative location, or otherwise verify my data without overwriting any existing files? Do I need to save anything in particular externally to make sure I can access the backups if I have to reinstall from scratch?

  Read the article

• DISK BOOT FAILURE after upgrading power supply

  - by Phenom

  After upgrading my power supply, I get the following error message when trying to boot into Windows 7. DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER My Windows 7 installation is on a SATA hard drive. I'm able to fix this problem if I hook up my IDE hard drive, then it boots the SATA hard drive fine. I don't like this solution though because then that means my IDE hard drive is drawing power even though it isn't being used. Why would a newer power supply need the IDE hard drive hooked up just to boot into the SATA hard drive? There are no boot files on the IDE hard drive; it is completely empty. My old power supply did not need it hooked up in order to boot the SATA hard drive.

  Read the article

• Certain selected files are not deleting when I use Disk Cleanup

  - by Stephanie Malouff

  I am using Windows 7 and have been trying to retrieve disk space, but when I run Disk Cleanup the Temporary Internet files (18.1KB) and System archived Windows Error Report (267KB) will not delete. It goes through the process as if they are being deleted, but my disk space remains the same; I then go back to Disk Cleanup to see if they have been removed and they are still there. I have tried removing them individually as well, but the outcome is still the same. Can someone please tell me why this is happening and what I can do to get them to delete properly?

  Read the article

• How to copy protected files when an Administrator in Vista (easily)

  - by earlz

  Hello, I have a harddrive I need to backup. In the harddrive is of course things like Documents and Settings which is set to not allow other people to see inside someone's personal folders. I am an administrator though and I can not figure out how to mark these files so that I am permitted to access them and copy them. IWhen I double click on My Documents then it pops up saying You must have permission to access this and gives me an option like ok or cancel. I click ok and then it says you do not have permission to access these files I'm an administrator on the system so I don't understand why Vista is locking me out. How can I setup vista so that it will let me copy every file, even ones I don't have permission to?

  Read the article

• SQL server environment

  - by Olegas D

  Hello I'm considering a bit of changes in current sales environment. And trying to check all cons and pros. Current situation. SQL server (quite decent HP server - server1) + backup server (smaller Dell server - server2). all sql files and sql server itself are on the server1. If something goes wrong with server1 I will have to manually move to server2. Connecting to the sql server: 1 HQ (where server located) + 4 sites through VPN. Now I'm considering 2 scenarios: Buy some storage system + update existing servers (add ram, upgrade processors) and go for VMWare ESXI. Rent a server at a datacenter + rent virtual server in case real server goes down. Also rent some space at data storage to keep SQL files there. Have anyone considered these things and maybe found some good pros/cons list? ;) Thanks

  Read the article

• My NTFS Partition keeps becoming "unusable" on Ubuntu, Any Ideas?

  - by gopherman

  I just purchased a new 2TB Drive External Seagate, My main system uses both Windows and Ubuntu So I am pretty much stuck with keeping my drive as NTFS. I have done this without any problems before but since I got this new drive I have been having issues. When I first load up Ubuntu the drive mounts and runs fine, after an unspecified amount of time i start getting Input/Output errors when accessing the drive. When I goto the Disk Utility I get a message stating the drive is "Unknown or Unused", If I disconnect and reconnect the drive or reboot everything is fine again. There's no errors coming up with S.M.A.R.T and it seems to work fine while under windows. Any thoughts?

  Read the article

• Is ext4 more expensive than ntfs?

  - by ???

  I have just converted an NTFS partition to ext4, however the total space seems reduced from 421G to 415G. Where did the 6G go? And, the reserved space is grown to 199M in ext4, much larger compared to 78M in NTFS, why? The partition is mainly used for movies/musics, so most files are very large (10M each). I want to use ext4 file system, is there any suggestion? mkfs.ntfs: /dev/sdb4 421G 78M 421G 1% /mnt/mmedia mkfs.ext4: /dev/sdb4 415G 199M 393G 1% /mnt/mmedia It's also weired that the remaining size of ext4 is 393G, shouldn't it be 415G or 414G? What happened to the disappeared 22G? Compared to NTFS, ext4 seems eaten 28G in total.

  Read the article

• Tuning MySQL to consume less memory

  - by Alex

  I have a VM which has 2GB Ram, (full specs) And I am setting up a site which has one table in particular with over a million records. There's little or no usage of this particular database (perhaps once or twice a day) but simply running mysql grinds the whole server to a halt. I've looked through the top results but nothing is really denting the CPU however the memory seems to be the issue. The site isnt even live of taking requests yet. the memory situation looks like this: # free -m total used free shared buffers cached Mem: 2006 1880 126 0 3 53 -/+ buffers/cache: 1823 183 Swap: 2047 345 1702 Are there any good pointers to tune mysql to stop hogging the system memory? Thanks very much EDIT: (requested by 8bit): http://tny.cz/b41a0b12

  Read the article

• Which modules can be disabled in apache2.4 on windows

  - by j0h

  I have an Apache 2.4 webserver running on Windows. I am looking into system hardening and the config file httpd.conf. There are numerous load modules and I am wondering which modules I can safely disable for performance and / or security improvements. Some examples of things I would think I can disable are: LoadModule cgi_module others like LoadModule rewrite_module LoadModule version_module LoadModule proxy_module LoadModule setenvif_module I am not so sure they can be disabled. I am running php5 as a scripting engine, with no databases, and that is it. My loaded modules are: core mod_win32 mpm_winnt http_core mod_so mod_access_compat mod_actions mod_alias mod_allowmethods mod_asis mod_auth_basic mod_authn_core mod_authn_file mod_authz_core mod_authz_groupfile mod_authz_host mod_authz_user mod_autoindex mod_dav_lock mod_dir mod_env mod_headers mod_include mod_info mod_isapi mod_log_config mod_cache_disk mod_mime mod_negotiation mod_proxy mod_proxy_ajp mod_rewrite mod_setenvif mod_socache_shmcb mod_ssl mod_status mod_version mod_php5

  Read the article

< Previous Page | 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344  | Next Page >