Search Results

Search found 6240 results on 250 pages for 'removable media'.

Page 134/250 | < Previous Page | 130 131 132 133 134 135 136 137 138 139 140 141  | Next Page >

  • mount old ATA disk to USB adapter

    - by 213441265152351
    I am trying to recover data from an old Linux that was installed in a computer on an ATA hard drive. I found a ScanLogic USB-IDE, an ATA adapter to USB 1.0 similar to the one in the picture: and after switching it on, I plugged it into a laptop with Ubuntu 12.04. I am used to the drives being automatically mounted, but this one doesn't show up in /media. After doing a dmesg, all I got is this: [215298.671924] usb 2-1.1: new full-speed USB device number 5 using ehci_hcd [215298.767330] scsi19 : usb-storage 2-1.1:1.0 [215299.841701] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.017258] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.197050] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.372730] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd I tried plugging in the adapter to the three different USB ports in my laptop (one of them USB 3.0), but got no luck with any of them. Any ideas?

    Read the article

  • How do I prevent useless content load on the page in responsive design?

    - by Ícaro Leandro
    In responsive design, elements are hidden in the page with @media queries and display: none in CSS. Ok. In my design however browsers that have less than 800px in width should avoid loading some content at all. When accessed with on a device with more than 800px of screen, the page loads fully. In mobile devices or even on desktop with less than 800px of width some content is hidden. I want to make the page load faster for low-resolution devices and avoid loading chunks of content that the user will never see. How can I go about this?

    Read the article

  • Sleepyti.me Calculates an Ideal Bedtime Based On Your Morning Schedule

    - by Jason Fitzpatrick
    Sleepyti.me is a web-based sleep calculator that uses average sleep cycle lengths to calculate what time you should go to bed in order to rise at a predetermined well rested and alert. Plug in the time you need to wake up and hit Calculator. Sleepyti.me charts out the 90 minute sleep cycles that will occur over your sleep period and, working backwards, suggests time you should fall asleep in order to wake up in between those cycles in order to increase alertness and have an easier time peeling yourself out of bed. For example, let’s say you need to get up at 7:00 AM. It will suggest you fall asleep at 10:00 PM/11:30 PM/1:00 AM/2:30 AM in order to align your sleep cycles with your proposed rising time. Hit up the link below to take it for a spin. Sleepyti.me How to Own Your Own Website (Even If You Can’t Build One) Pt 3 How to Sync Your Media Across Your Entire House with XBMC How to Own Your Own Website (Even If You Can’t Build One) Pt 2

    Read the article

  • Unable to locate package lightread

    - by TENG PENG
    I have changed my source to local server. I'm using Ubuntu 12.10. When I type apt-cache search in terminal, it shows nothing. When I install lightread it shows Unable to locate package lightread. When I install lightread manually by python. It shows python '/home/peng/Downloads/quickly_trunk/setup.py' Traceback (most recent call last): File "/home/peng/Downloads/quickly_trunk/setup.py", line 93, in <module> data_files=[('share/icons/hicolor/128x128/apps', ['data/media/lightread.png'])] File "/usr/lib/python2.7/dist-packages/DistUtilsExtra/auto.py", line 71, in setup src_mark(src, 'setup.py') File "/usr/lib/python2.7/dist-packages/DistUtilsExtra/auto.py", line 527, in src_mark src.remove(path) KeyError: 'setup.py' How to solve the problem?

    Read the article

  • Triggering an action when a specific volume is connected

    - by ereOn
    I have a USB key that contains my keepass2 password database and I'd like to perform some actions when it is plugged into my computer, namely: Auto-mount it to some specific location When the mounting is done properly, launching keepass2 on the password database file Simple tasks I guess, but I can't find how to do that. I'm using Ubuntu 12.10, and it auto-mounts the device as a "media usb-key" and tries to open the images on it (even though there are none). What is the best way to do that and to disable the ubuntu auto-mounting (so it doesn't conflict) ?

    Read the article

  • Printing with Lacie Lightscribe requires root privileges

    - by James
    I have installed Lacie Lightscribe software on Ubuntu 12.04. Everything seems to be fine, the drive is detected, the proper media is detected, but when I click print I get the message "Printing Requires Root Privileges". I am the main (administrator) account on this computer, part of the sudo group and I cannot seem to find an answer to this dilemna in plain english. I've seen some apparently relevant posts which say things like "check whether the files /usr/4L/4L-gui and /usr/4L/4L-cli have any setuid-bits set. If so, remove them" but I need more detailed step-by-step instructions than that, please. Is there anyone who knows how to solve this?

    Read the article

  • Silverlight 4 Twitter Client - Part 2

    - by Max
    We will create a few classes now to help us with storing and retrieving user credentials, so that we don't ask for it every time we want to speak with Twitter for getting some information. Now the class to sorting out the credentials. We will have this class as a static so as to ensure one instance of the same. This class is mainly going to include a getter setter for username and password, a method to check if the user if logged in and another one to log out the user. You can get the code here. Now let us create another class to facilitate easy retrieval from twitter xml format results for any queries we make. This basically involves just creating a getter setter for all the values that you would like to retrieve from the xml document returned. You can get the format of the xml document from here. Here is what I've in my Status.cs data structure class. using System; using System.Net; using System.Windows; using System.Windows.Controls; using System.Windows.Documents; using System.Windows.Ink; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Animation; using System.Windows.Shapes;  namespace MaxTwitter.Classes { public class Status { public Status() {} public string ID { get; set; } public string Text { get; set; } public string Source { get; set; } public string UserID { get; set; } public string UserName { get; set; } } }  Now let us looking into implementing the Login.xaml.cs, first thing here is if the user is already logged in, we need to redirect the user to the homepage, this we can accomplish using the event OnNavigatedTo, which is fired when the user navigates to this particular Login page. Here you utilize the navigate to method of NavigationService to goto a different page if the user is already logged in. if (GlobalVariable.isLoggedin())         this.NavigationService.Navigate(new Uri("/Home", UriKind.Relative));  On the submit button click event, add the new event handler, which would save the perform the WebClient request and download the results as xml string. WebRequest.RegisterPrefix("https://", System.Net.Browser.WebRequestCreator.ClientHttp);  The following line allows us to create a web client to create a web request to a url and get back the string response. Something that came as a great news with SL 4 for many SL developers.   WebClient myService = new WebClient(); myService.AllowReadStreamBuffering = true; myService.UseDefaultCredentials = false; myService.Credentials = new NetworkCredential(TwitterUsername.Text, TwitterPassword.Password);  Here in the following line, we add an event that has to be fired once the xml string has been downloaded. Here you can do all your XLINQ stuff.   myService.DownloadStringCompleted += new DownloadStringCompletedEventHandler(TimelineRequestCompleted);   myService.DownloadStringAsync(new Uri("https://twitter.com/statuses/friends_timeline.xml"));  Now let us look at implementing the TimelineRequestCompleted event. Here we are not actually using the string response we get from twitter, I just use it to ensure the user is authenticated successfully and then save the credentials and redirect to home page. public void TimelineRequestCompleted(object sender, System.Net.DownloadStringCompletedEventArgs e) { if (e.Error != null) { MessageBox.Show("This application must be installed first"); }  If there is no error, we can save the credentials to reuse it later.   else { GlobalVariable.saveCredentials(TwitterUsername.Text, TwitterPassword.Password); this.NavigationService.Navigate(new System.Uri("/Home", UriKind.Relative)); } } Ok so now login page is done. Now the main thing – running this application. This credentials stuff would only work, if the application is run out of the browser. So we need fiddle with a few Silverlioght project settings to enable this. Here is how:    Right click on Silverlight > properties then check the "Enable running application out of browser".    Then click on Out-Of-Browser settings and check "Require elevated trust…" option. That's it, all done to run. Now press F5 to run the application, fix the errors if any. Then once the application opens up in browser with the login page, right click and choose install.  Once you install, it would automatically run and you can login and can see that you are redirected to the Home page. Here are the files that are related to this posts. We will look at implementing the Home page, etc… in the next post. Please post your comments and feedbacks; it would greatly help me in improving my posts!  Thanks for your time, catch you soon.

    Read the article

  • Advertising Opportunity – Profit Magazine For Oracle OpenWorld

    - by tfryer
    With Oracle OpenWorld fast approaching, Profit Magazine is offering Oracle Specialized partners the opportunity to extend their brand to executive-level Oracle customers and top prospects in the Profit Magazine: Specialized Partner Edition. The printed magazine will be distributed to Oracle attendees at Oracle OpenWorld San Francisco, and the digital copy will be distribution to over 500,000 customers in the Profit readers circle. In addition, the magazine will be promoted via social media such as Facebook, LinkedIn, and Twitter. For a very affordable advertising opportunity, please contact Tom Cometa at [email protected] or +1.510.339.2403. Reserve before July 27th. Hurry! An early bird discount of 15% applies if booked before July 18th.

    Read the article

  • slow speed transfering files to a local network device

    - by F. Ariel Jung
    I'm having troubles copying files from my pc(ubuntu 13.04 64 bits) to a Media Center(WDTV Live: with an SATA2 HDD attached) through the local network. the speed is to slow, it's up to 2.0 MB/s image: http://s11.postimg.org/g1nuai92b/Captura_de_pantalla_de_2013_06_24_07_46_55.png (I don't use image tag because it is a big image) my PC has a wifi network card Tp Link TL-WN951N and it is connected to a TP Link TL-WDR3500 router via wifi, and the WDTV Live is connected via LAN here is a iwconfig: eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"TL-WDR3500" Mode:Managed Frequency:2.462 GHz Access Point: A0:F3:C1:6C:3B:F1 Bit Rate=39 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=62/70 Signal level=-48 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:33521 Invalid misc:2245290 Missed beacon:0 if more data is required I'll post it as needed. I can't figure this out, needed help. please

    Read the article

  • Mark Hurd on the Customer Revolution: Oracle's Top 10 Insights

    - by Richard Lefebvre
    Reprint of an article from Forbes Businesses that fail to focus on customer experience will hear a giant sucking sound from their vanishing profitability. Because in today’s dynamic global marketplace, consumers now hold the power in the buyer-seller equation, and sellers need to revamp their strategy for this new world order. The ability to relentlessly deliver connected, personalized and rewarding customer experiences is rapidly becoming one of the primary sources of competitive advantage in today’s dynamic global marketplace. And the inability or unwillingness to realize that the customer is a company’s most important asset will lead, inevitably, to decline and failure. Welcome to the lifecycle of customer experience, in which consumers explore, engage, shop, buy, ask, compare, complain, socialize, exchange, and more across multiple channels with the unconditional expectation that each of those interactions will be completed in an efficient and personalized manner however, wherever, and whenever the customer wants. While many niche companies are offering point solutions within that sprawling and complex spectrum of needs and requirements, businesses looking to deliver superb customer experiences are still left having to do multiple product evaluations, multiple contract negotiations, multiple test projects, multiple deployments, and–perhaps most annoying of all–multiple and never-ending integration projects to string together all those niche products from all those niche vendors. With its new suite of customer-experience solutions, Oracle believes it can help companies unravel these challenges and move at the speed of their customers, anticipating their needs and desires and creating enduring and profitable relationships. Those solutions span the full range of marketing, selling, commerce, service, listening/insights, and social and collaboration tools for employees. When Oracle launched its suite of Customer Experience solutions at a recent event in New York City, president Mark Hurd analyzed the customer experience revolution taking place and presented Oracle’s strategy for empowering companies to capitalize on this important market shift. From Hurd’s presentation and related materials, I’ve extracted a list of Hurd’s Top 10 Insights into the Customer Revolution. 1. Please Don’t Feed the Competitor’s Pipeline!After enduring a poor experience, 89% of consumers say they would immediately take their business to your competitor. (Except where noted, the source for these findings is the 2011 Customer Experience Impact (CEI) Report including a survey commissioned by RightNow (acquired by Oracle in March 2012) and conducted by Harris Interactive.) 2. The Addressable Market Is Massive. Only 1% of consumers say their expectations were always met by their actual experiences. 3. They’re Willing to Pay More! In return for a great experience, 86% of consumers say they’ll pay up to 25% more. 4. The Social Media Microphone Is Always Live. After suffering through a poor experience, more than 25% of consumers said they posted a negative comment on Twitter or Facebook or other social media sites. Conversely, of those consumers who got a response after complaining, 22% posted positive comments about the company. 5.  The New Deal Is Never Done: Embrace the Entire Customer Lifecycle. An appropriately active and engaged relationship, says Hurd, extends across every step of the entire processs: need, research, select, purchase, receive, use, maintain, and recommend. 6. The 360-Degree Commitment. Customers want to do business with companies that actively and openly demonstrate the desire to establish strong and seamless connections across employees, the company, and the customer, says research firm Temkin Group in its report called “The CX Competencies.” 7. Understand the Emotional Drivers Behind Brand Love. What makes consumers fall in love with a brand? Among the top factors are friendly employees and customer reps (73%), easy access to information and support (55%), and personalized experiences, such as when companies know precisely what products or services customers have purchased in the past and what issues those customers have raised (36%). 8.  The Importance of Immediate Action. You’ve got one week to respond–and then the opportunity’s lost. If your company needs more than a week to answer a prospect’s question or request, most of those prospects will terminate the relationship. 9.  Want More Revenue, Less Churn, and More Referrals? Then improve the overall customer experience: Forrester’s research says that approach put an extra $900 million in the pockets of wireless service providers, $800 million for hotels, and $400 million for airlines. 10. The Formula for CX Success.  Hurd says it includes three elegantly interlaced factors: Connected Engagement, to personalize the experience; Actionable Insight, to maximize the engagement; and Optimized Execution, to deliver on the promise of value. RECOMMENDED READING: The Top 10 Strategic CIO Issues For 2013 Wal-Mart, Amazon, eBay: Who’s the Speed King of Retail? Career Suicide and the CIO: 4 Deadly New Threats Memo to Marc Benioff: Social Is a Tool, Not an App

    Read the article

  • Guide to particulars in customizing Ubuntu Installer

    - by Oxwivi
    I've tried reading through guides for preseeding and customization, but I did not understand how and where to modify which options. I can only comfortably learn through practical examples, for which I ask this question. I am looking into preseeding and customizing solution to just do a few specific tasks: Completely rewrite the packages installed by default, much like minimal installs and with the --no-install-recommends flag of apt-get. Add a few proprietary applications to the default install list Automatically install and mount proprietary drivers on install and live session Edit the default configuration files for applications installed by default Specify partitions along with permission Modify the package pool in the installer media (CD/DVD/USB), preferably using command line tools similar to apt-get and aptitude. Can anyone please tell me how to configure preseed option to only do the above? NB I do not understand the GPG part after adding/removing packages in the pool. PS The third point is of particular importance.

    Read the article

  • Week in Geek: Botnet Epidemic Fueled by Malware Toolkits Edition

    - by Asian Angel
    This week we learned how to stream media files from any PC to a PlayStation, enable user-specific wireless networks in Windows 7, monitor the bandwidth consumption of individual applications, configure the Linux Grub2 Boot Menu the easy way, “add Dropbox to the Start Menu, understand symbolic links, & rip TV Series DVDs into episode files”, and more Latest Features How-To Geek ETC How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware Comix is an Awesome Comics Archive Viewer for Linux Get the MakeUseOf eBook Guide to Speeding Up Windows for Free Need Tech Support? Call the Star Wars Help Desk! [Video Classic] Reclaim Vertical UI Space by Adding a Toolbar to the Left or Right Side of Firefox Androidify Turns You into an Android-style Avatar Reader for Android Updates; Now with Feed Widgets and More

    Read the article

  • Is there a good example of the difference between practice and theory?

    - by a_person
    There has been a lot of posters advising that the best way to retain knowledge is to apply it practically. After ignoring said advice for several years in a futile attempt to accumulate enough theoretical knowledge to be prepared for every possible case scenario, the process which lead me to assembling a library that's easily worth ~6K, I finally get it. I would like to share my story in the hopes that others will avoid taking the same route that was taken by me. I've selected graphical format (photos with caption to be exact) as my media. Help me with your ideas, maybe a fragment of code, or other imagery that would convey a message of the inherent difference between practice and theory.

    Read the article

  • A Short History of the GIF [Video]

    - by Jason Fitzpatrick
    From the earliest blinking “Under Construction” signs on web sites to joke images still passed around, the humble little GIF has been with us a long time. Check out this video to learn more about it. Courtesy of LEGS Media, we’re treated to a cute claymation-style look at the birth, revision, and long life of the ubiquitous little GIF. [via Geeks Are Sexy] Secure Yourself by Using Two-Step Verification on These 16 Web Services How to Fix a Stuck Pixel on an LCD Monitor How to Factory Reset Your Android Phone or Tablet When It Won’t Boot

    Read the article

  • toshiba c800 Fn keys not working

    - by Nirjon Nj
    i am a new born baby in Ubuntu family. And i am really loving it. but i am having few issues which are rally annoying.Please help me to remain in this family. my Toshiba C800 laptop(12.04lts desktop) has special Fn keys as followed Fn+ F2-BRIGHTNESS DOWN F3-BRIGHTNESS UP F4-DISPLAY SELECT F5-TOUCH PAD on/off F6-PREVIOUS F7-PLAY/PAUSE F8-NEXT F9-VOLUME DOWN F10-VOLUME F11-MUTE F12-WiFi on/off now the problem is keys are working fine from F6 to F11(media player keys, i may say) but the keys from F2 to F5 and F12(setting change keys) are not working. please help me. i really liked ubuntu!!

    Read the article

  • How do I configure my 2 RAID drives so I can use it as /home?

    - by Kenn
    I've installed Ubuntu 11 64-bit to a 2 TB drive. it is on /dev/sda - port 1 of SATA Host Adaptor. This contains /dev/sda1 (1 MB boot), /dev/sda2 (2TB EXT4), /dev/sda3 8.6GB SWAP. I also have: /dev/sdb 2TB RAID COMPONENT /dev/sdc 2TB RAID COMPONENT which also show as /dev/dm-0 not partitioned /dev/dm-2 not partitioned which is mounted as /media/RAID_HOME I'm completely stumped as to how to use this version of Ubuntu to make these drives seem as just one raid mirrored drive and then how to transfer /home onto it.

    Read the article

  • WWW.yoursite.com or HTTP://yoursite.com which one is futureproof?

    - by Sam
    http://yoursite.com www.yoursite.com http://www.yoursite.com yoursite.com Which of these would you choose as your favourite to work with, if you were to make a site for 2011 and beyond, which domainname would you provide to clients, websites linking to you, your letterhead, contact cards. Why one OR other? Which to avoid? Thinking of the following aspects: validity, correctly loading URL audience, most geeks know http://, most seniors/clients don't easiest to remember / URL as a brand misspellings by user input (in mobile phone or desktop browser) browsers not understanding protocol-less links total length of chars for easy user input method of peferance by major search engines/social media sites consistency sothat links dont fragment but all point to the same

    Read the article

  • LG LW20 Express won't boot after hdd replace

    - by Mika
    My old laptop (LG LW20 Express) got a hdd failure and I replaced the hdd. Now the laptop won't boot from cd or usb. I'm trying to install ubuntu on it. When I turn the laptop on it shows me the startup screen but when it should be the time to load operating system it just gives a black screen and starts over. This loop continues until I shut down the laptop. I created the usb boot drive following this guide https://help.ubuntu.com/community/Installation/FromUSBStick/ I used my boot cd to install ubuntu on this machine I'm using right now. So at least the cd should work. From the BIOS I can see that my newly installed hdd is recognized and put as a secondary master. Also the cd and removable media are in the boot list before hdd. The laptop runs pretty hot. The fan is at full speed pretty soon after the laptop is turned on. Earlier I suspected that it would have been the almost broken hdd that would have produced that heat but there obviously is something else also. Any ideas what to check?

    Read the article

  • Trying to configure samba share with office server

    - by tomphelps
    Hi, i'm trying to set up fstab to automatically connect to my office shared server. I'm undoubtedly doing something silly here as the username and password and server name work fine in the first code snippet below, just not the second - any help would be appreciated! The following command works as expected... tom@tom-desktop: sudo /usr/bin/smbclient -L Server.local -Uguest Enter guest's password: Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.10] Sharename Type Comment --------- ---- ------- Lacie Disk Disk macosx Server Disk macosx IPC$ IPC IPC Service (Server) ADMIN$ IPC IPC Service (Server) Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.10] Server Comment --------- ------- ACER-9D60040D10 SERVER Server Workgroup Master --------- ------- WORKGROUP ACER-9D60040D10 But when i add the following line to /etc/fstab, i get this error: cifs_mount failed w/return code = -22 //Server.local/Server /media/maguires cifs username=guest,password=password 0 0

    Read the article

  • packhard bell dot s netbook ubuntu 12.10

    - by Kermit
    sorry im absolutly linux beginner.... i bought a packhard bell netbook dots with Limpus.did not get along with limpus so wanted to install ubuntu. netbook: 2 GB RAM intel Atom N2600, intel graphics Media Accelerator 3600 I over installled ubuntu 12.10 (desktop version) like in the instruction (isofile over USB). Installation went fine. No problems. when starting after installation alot of text is coming.....starting xyz....with alot of okays at the end of line but nothing happends: ends with #Starting CPU interrups balancing daemon, stopping anachronics cron and blinking cursor... was reading in this forum, tried to do some things like #recoverymode# and nomodeset... but did not work or where do i get this graphic drivers from. Packard bell just offers windows drivers.and how do i install them? maybe its a completely diffrent cause for this? Thanks alot

    Read the article

  • Download the Original Fallout For Free Today [4/6]

    - by Jason Fitzpatrick
    Fallout, the first game in the popular post-apocalyptic RPG series, is available for free today. Grab the game along with a detailed manual, game bible, soundtrack, and more. Courtesty of gaming site GOG, you can score a free Fallout bundle that includes the original game from 1997, a detailed manual, a 200+ page game bible filled with the history of the Fallout games and timeline, wallpaper, artwork, and even the game soundtrack. Not a bad haul for a single free download that weighs in at 506MB. Check out the video of the in-game introduction above and then hit up the link below to grab a copy. Fallout [GOG via Boing Boing] How to Own Your Own Website (Even If You Can’t Build One) Pt 3 How to Sync Your Media Across Your Entire House with XBMC How to Own Your Own Website (Even If You Can’t Build One) Pt 2

    Read the article

  • Ogre3D : seeking advices about game files management

    - by Tibor
    I'm working on a new game, and its related level editor, based on Ogre3D. I was thinking about how i could manage the game files, knowing that Ogre use .mesh files for models, .material for materials/texture information etc... . At first i thought about a common .zip folder decompressed at runtime (the same way Torchlight and Ogre samples do). But this way the game assets become a monolithic archive, loading takes time, and could be difficult to eventually patch them. So, let's say i have a game object named "Cube" i want to load in my program. Going for modularity, what if i create a compressed file (using zlib compression routines) named Cube.extname, containing its sub-files Cube.mesh, Cube.material and so on ? Are there any alternatives or should i stick with compressed objects? PS: Just to clear things, the answer is unrelated to my program code, at the moment i'm using "resources.cfg" pointing to the OgreSDK media directory.

    Read the article

  • How To Send eBooks & Other Documents To Your Kindle

    - by Chris Hoffman
    Send to Kindle for PC makes it easy to put content on your Kindle, whether it’s a free ebook or a Word document. You can also email files to @Kindle.com or transfer them over USB, the old-fashioned way. Any documents you transfer over are stored in your Kindle Personal Documents online. When you buy a new Kindle, they’ll be automatically restored. You can also access your personal documents from Kindle apps on other platforms. The Best Free Portable Apps for Your Flash Drive Toolkit How to Own Your Own Website (Even If You Can’t Build One) Pt 3 How to Sync Your Media Across Your Entire House with XBMC

    Read the article

  • cannot add movie file to pitivi

    - by niku
    when i try adding this movie file to pitivie i get the error as follows (i can play the file in mplayer just fine tho): Problem: An internal error occurred while analyzing this file: Could not find GStreamer caps mapping for FFmpeg codec 'h264', and you are using an external libavcodec. This is most likely due to a packaging problem and/or libavcodec having been upgraded to a version that is not compatible with this version of gstreamer-ffmpeg. Make sure your gstreamer-ffmpeg and libavcodec packages come from the same source/repository. Extra information: gstffmpegdec.c(1336): gst_ffmpegdec_negotiate (): /GstPipeline:Discoverer-file:///media/Data/pitivi/taw2.mkv/GstDecodeBin2:dbin/ffdec_h264:ffdec_h2645 Also, my system language is English, but regional format is set to German. mplayer installed in German, I want it in English tho... Thanks a lot for your help :) I know I'm a noob .

    Read the article

  • Video player with good subtitle rendering

    - by Oxwivi
    Is there any way to improve the subtitle rendering capabilities of Totem? The subtitles positioning seems to be hard-coded in it and even though the style is user-customizable, it does not confirm to the formatting in subtitle data. In some scenes where writings appear, the subtitles are supposed to appear next to those along with what is being said at that moment. However, on those scenes the translations of text onscreen appears on the default subtitle area with nothing about the things being said. The correct rendering are according to the open-source Windows video player, Media Player Classic - Home Cinema. There are no Linux port as far as I'm aware. If VLC's subtitle support is the same as in Windows, it won't work for me, period. Please suggest anyway to improve subtitle rendering in Totem, other video players, or a way to port MPC-HC.

    Read the article

< Previous Page | 130 131 132 133 134 135 136 137 138 139 140 141  | Next Page >