Search Results

Search found 4879 results on 196 pages for 'sarah proper'.

Page 136/196 | < Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >

• Forward all tracif from one IP to another Ip on OS X

  - by Josh

  This is related to this question I just asked... I have two IP address on my iMac I want to "bridge". I'm not sure what the proper terminology is... here's the situation. My iMac has a firewire connection to my laptop and an ethernet connection to the rest of my office. My laptop has an ip of 192.168.100.2 (on the firewire interface). My iMac has an IP of 192.168.100.1 on the firewire interface, and two IPs, 10.1.0.6 and 10.1.0.7, on it's ethernet interface. If I wanted to forward all traffic coming in from 192.168.100.2 on my OS X machine to go out on IP 10.1.0.7, and vice-versa, can this be done? I assume I would use the ipfw command. Essentially I want to "bridge" the firewire network to the ethernet network so my laptop can see all the machines on the 10.1 network, and all those machines can see my laptop at 10.1.0.7. Is this possible?

  Read the article

• backupexec 12.5 not following symlinks on linux agent

  - by Peter Carrero

  Ok, we are at a loss here trying to backup a linux box to a backupexec server... we got a backupexec 12.5 server and a "backupexec for windows servers linux agent" (sigh) running on one of our linux boxes. When a backup runs, we get exceptions reported for our symbolic links. it says something like: BACKUP- \\<servername>\[ROOT] File \\<servername>\[ROOT]/<foldername>/<symlink> is in the backup selection list but was not found. Looking at the selection list, the symlink shows as a 1k file on BUE. Tools-Options-Backup has Backup files and directories by following symbolic links/junction points selected. These same checkboxes are selected on the Job Setup-Job Properties-Edit Template-Advanced Additionally, all the checkboxes are checkeced on Tools-Options-Linux, Unix, and Macintosh and on the Job Set-Job Properties-Edit Template-Linux, Unix, and Macintosh. These checkboxes read: "Preserve change time", "Follow local mount points", "Follow remote mount points", "Backup contents of soft-linked directories" and "Lock remote files", but apparently changing those options produce the same result. Any help on how to get BUE to make a proper backup would be greatly appreciated. Thanks.

  Read the article

• How to configure Apache to let PHP handle OPTIONS HTTP requests?

  - by Robin Berjon

  In order to set up a proper test suite for CORS (cross-domain requests) I need to be able to handle the HTTP OPTIONS method directly from script. I therefore have a simple PHP script that detects the OPTIONS method, and reacts accordingly by outputting some specific headers. The PHP side is not a problem. If I use curl to issue GET/POST/HEAD/PUT/etc. requests they all go to the script and it clearly handles them fine. If I issue an OPTIONS request however, it never reaches the script: Apache immediately replies listing a set of methods that it believes to be appropriate for this resource. I can tell that the script isn't run (no logging, none of its output makes it to the response, etc.). I've been going through the Apache configuration, have made sure no applicable .htaccess is in the way, I've tweaked a bunch of things such as Limit/LimitExcept directives, but I can't get it to change its behaviour. I've also tried to find information on a technique from my youth that could have helped here: NPH (non-parsed headers) scripts; but apparently that has now disappeared (at least, I can't find any recent information about it that works). So the question is: how do I tweak Apache's configuration so that it will let my script handle OPTIONS?

  Read the article

• Outlook and IMAP - Outlook doesn't allow the Drafts and Trash folders to sync with the respective IMAP folders

  - by Matt

  I'm using Outlook 2007 and Outlook 2010 against an IMAP server (the problem exists across many, like Gmail, you name it). Outlook lets you set your Outlook "Sent" folder to map to the IMAP server's Sent folder (the other choice is to map your Outlook Sent to your Personal Folders Sent) - this is good. When you send a message from Outlook and then look in the sent folder of the IMAP server (e.g. from a different client or from a browser), the messages are there. This is the behavior I want. Outlook does NOT support the same behavior for Drafts and Trash. In both cases, items deleted (or Drafts saved) in Outlook go in to Outlook's local folders and do NOT show on the IMAP server's Trash or Drafts folders. Same problem in reverse. Thunderbird on the other hand does support the proper mapping of Drafts, Sent and Trash. I expected this to be IMAP-specific but it appears to be client specific. What does Outlook implement it this way and is there a workaround?

  Read the article

• Domain authentication over OPEN wireless pre-logon (Windows 7 Pro) - No logon servers avail

  - by Shadow00Caster

  I have a plethora of laptops that are joined to an AD domain. I have an enterprise wireless system setup, the users of these laptops will be using an OPEN unsecured SSID which will ultimately have a captive portal that uses Radius-AD auth and firewall rules to allow access pre-captive portal auth to the proper ip's/ports of DC's etc for auth etc. I already have other laptops/users connecting to another SSID with 802.11x and SSO, all works perfectly pre-logon etc. My problem is with this open network, for some reason I cannot get the machines to auth to AD. The laptops connect to the wireless network, I confirm this on the controller and can ping the laptop at startup. I sharked the wires on the 2 DC's that these machines auth to, I can see a DNS SOA update from a laptop im testing with and can ping that test laptop from both DC's. When I try to logon, "There are currently no logon servers available to service the logon request." The shark shows no incoming connections to either DC even though the laptop is connected and pingable. Any help is greatly appreciated.

  Read the article

• Rsyslog stops sending data to remote server after log rotation

  - by Vincent B.

  In my configuration, I have rsyslog who is in charge of following changes of /home/user/my_app/shared/log/unicorn.stderr.log using imfile. The content is sent to another remote logging server using TCP. When the log file rotates, rsyslog stops sending data to the remote server. I tried reloading rsyslog, sending a HUP signal and restarting it altogether, but nothing worked. The only ways I could find that actually worked were dirty: stop the service, delete the rsyslog stat files and start rsyslog again. All that in a postrotate hook in my logrotate file. kill -9 rsyslog and start it over. Is there a proper way for me to do this without touching rsyslog internals? Rsyslog file $ModLoad immark $ModLoad imudp $ModLoad imtcp $ModLoad imuxsock $ModLoad imklog $ModLoad imfile $template WithoutTimeFormat,"[environment] [%syslogtag%] -- %msg%" $WorkDirectory /var/spool/rsyslog $InputFileName /home/user/my_app/shared/log/unicorn.stderr.log $InputFileTag unicorn-stderr $InputFileStateFile stat-unicorn-stderr $InputFileSeverity info $InputFileFacility local8 $InputFilePollInterval 1 $InputFilePersistStateInterval 1 $InputRunFileMonitor # Forward to remote server if $syslogtag contains 'apache-' then @@my_server:5000;WithoutTimeFormat :syslogtag, contains, "apache-" ~ *.* @@my_server:5000;SyslFormat Logrotate file /home/user/shared/log/*.log { daily missingok dateext rotate 30 compress notifempty extension gz copytruncate create 640 user user sharedscripts post-rotate (stop rsyslog && rm /var/spool/rsyslog/stat-* && start rsyslog 2&1) || true endscript } FYI, the file is readable for the rsyslog user, my server is reachable and other log files which do not rotate on the same cycle continue to be tracked properly. I'm running Ubuntu 12.04.

  Read the article

• 'txn-current-lock': Permission denied [500, #13] - Subversion + Apache Configuration Issue

  - by wfoster

  Current Setup Fedora 13 32bit Apache 2.2.16 Subversion repositories setup under /var/www/svn I have two different repositories under this directory so my /etc/httpd/conf.d/subversion.conf setup in this way; LoadModule dav_svn_module modules/mod_dav_svn.so LoadModule authz_svn_module modules/mod_authz_svn.so <Location /svn> DAV svn SVNListParentPath on SVNParentPath /var/www/svn <LimitExcept GET PROPFIND OPTIONS REPORT> AuthType Basic AuthName "Subversion Repository" AuthUserFile /etc/httpd/.htpasswd Require valid-user </LimitExcept> </Location> After copying over my repos and using; chmod 755 -R /var/www/svn chcon -R -t httpd_sys_content_t /var/www/svn chown apache:apache -R /var/www/svn I can browse my repos fine through the browser, and I can update all my working copies, however when I try to check in from anywhere I get the same error Can't open file '/var/www/svn/repo/db/txn-current-lock':Permission denied I have been working on this issue for a while now and cant seem to find a solution to my issues. It might be of some use to know that the repo existed on a different server before this, it has been now moved to this new server. Everything I have read seems to indicate that the permissions for apache are incorrect, however apache is set to run as User apache and Group apache. So as far as I can tell my setup is correct. The behavior is not though. Any Ideas? Solution The only way I was able to get this to work is to disable SELinux, it could also be done by setting the proper booleans with SELinux via setsetbool and getsebool since this is just a home server, I decided to disable SELinux and am reaping the benefits now.

  Read the article

• SQL Server Instance login issue

  - by reallyJim

  I've just brought up a new installation of SQL Server 2008. I installed the default instance as well as one named instance. I'm having a problem connecting to the named instance from anywhere besides the server itself with any user besides 'sa'. I am running in mixed mode. I have a login/user that has a known username. Using that user/login, I can properly connect when directly on the server. When I attempt to login from anywhere else, I recieve a "Login failed for user ''", with Error 18456. In the log file in the server, I see a reason that doesn't seem to help: "Reason: Could not find a login matching the name provided.". However, that user/login DOES exist, as I can use it locally. There are no further details about the error. Where can I start to find something to help me with this? I've tried deleting and recreating the user, as well as just creating a new one from scratch--same result, locally fine, remotely an error. EDIT: Partially Resolved. I'm now passed the base issue--the clients were trying to connect via the default instance. I don't know why. So, once proper ports were opened in the firewall, and a static port assigned to the named instance, I can now connect--BUT ONLY if I specify the connection as Server,Port. SQLBrowser is apparently not helping/working in this case. I've verified it IS running, and done a stop/restart after my config changes, but no difference yet.

  Read the article

• Test whether svn REPO changes are reflected in Working Copy

  - by user492160

  Requirement Changes will be made to the REPO directory and this should get updated to wc(working copy) as opposed to the normal way of WC REPO. Senario: My svn repo- /var/www/svn/drupal My checkout-dir/working-copy- /var/www/html/drupalsite So I've done: edited post-commit hook to contain: "/usr/bin/svn update /var/www/html/drupalsite" I won't make any change to svn WC. I'll make changes to svn REPO- /var/www/svn/drupal. After changes are made to svn repo, run "svn commit /var/www/html/drupalsite". This will trigger the post-commit hook. This inturn will run "svn update /var/www/svn/drupal" and thus my WC will get updated with the changes of REPO. Query a. Would the above steps 1-3 help achieve my 'Requirement'? b. I'd need advise on how to test if the above setup works successfully or not. I'm at loss about the success of steps 1-3 the reason why query(a) is present. This is a bit more of a concern for me. NB: I'm new to subversion. Whatever I've configured till now have been done by reading articles online. Reason for query (b) is because I'm not into development. It seems to be a php drupal website and I happen to be setting it up. So I'm not aware as to how to make a "PROPER" change in REPO so that it gets reflected in WC. If reflected, my configs are right and the team can start on development. I manually put a random file/folder into REPO dir for seeing a change in WC and ran steps 1-3 but was of no avail and later on learned that it was NOT the way to make a change to a REPO. Pleas advise. Thanks

  Read the article

• Setting up HTTPS across multiple servers

  - by JohnyD

  I'm looking to offer our online services over https and I'm having a couple of problems understanding how to accomplish this. To access our services you must pass through our ISA firewall to a Win2000 server running IIS6. About half our services are located here and the other half take you to a Win2003 server also running IIS6. So, in order to achieve this must each server have the proper certificate installed? ISA, IIS6_1 and IIS6_2? Is there a separate configuration that must be made to our ISA firewall? The other problem is with the CA and knowing how many certificates I need. It's important to note that the domain name for our services on IIS6_1 is www.domainname.com but the domain name on IIS6_2 is services.domainname.com. I believe that this will require me to purchase more than one certificate. It looks as though we will be going with Thawte's SSL123 as it's a good name and it's fast to get. Will I need to purchase 2 certificates (one for www that will be installed on our ISA firewall as well as IIS6_1, and one for services.domainname.com on IIS6_2)? Or will I need to purchase 3, the extra one being used on our firewall server? Another side question is about SAN's (subject alternative names). Is this basically adding sub-domains to your cert? So I could purchase one cert with 1 SAN for my www and services.? Thanks a lot for your help! Please let me know if I can provide any further information.

  Read the article

• IIS 7 URL Rewrite to GeoServer running on Apache

  - by Maxim Zaslavsky

  I'm building a mapping application based on OpenLayers that uses GeoServer to serve up mapping data. The problem I'm having is that besides the map images I'm requesting through WMS, I'm using jQuery AJAX to get information from GeoServer. As GeoServer is running on a different port, my requests are being blocked due to cross-site scripting security policies in JavaScript. As a Java application, GeoServer runs on Apache on port 8080, while my IIS instance is running on port 80. Instead of building a proxy, I've decided to use URL Rewriting in IIS7 to fix this problem. I'm following this guide, but it's still not working. Here are my URL Rewrite rule settings: Matches URL: (.*) Condition: {HTTP_URL} matching /geoserver Action: rewrite to http://localhost:8080/{R:1}, appending query string When I request http://localhost/geoserver/wms?QUERY_LAYERS=SanDiego:FWSA_sandiego&LAYERS=SanDiego:FWSA_sandiego&SERVICE=WMS&VERSION=1.1.1&FEATURE_COUNT=20&REQUEST=GetFeatureInfo&EXCEPTIONS=application/vnd.ogc.se_xml&BBOX=-13009123.590156,3862057.2905992,-13006066.109025,3865114.7717302&INFO_FORMAT=text/html&x=20&y=20&width=40&height=40&srs=EPSG:900913, however, all I get is a 404, although the same request on port 8080 returns the proper result. What am I doing wrong? Thanks in advance.

  Read the article

• FreeNAS AFP Doesn't Authenticate

  - by Timothy R. Butler

  I just set up a FreeNAS 8.0.3 server and am trying to use its AFP (Netatalk) service to access it via a Mac OS X Lion system. I created the ZFS volume, set its permissions to include my user in its owner group (and set group write permissions), created an AFP share with AFP3 and told that share to "allow" @uninet (my group). I have a user on the server named tbutler, matching the user on my Mac. I can see the server, "Beatrice," in Finder. When I try to login in Finder using "Connect As...," the user "tbutler" and the proper password, I am returned to the main Finder window with the black bar now saying "Connection Failed." Here's the most recent data from /var/messages on the server, which shows me trying to login both as a "Registered User" and a "Guest": Jul 30 00:29:07 freenas afpd[8972]: AFP3.3 Login by nobody Jul 30 00:29:08 freenas afpd[8972]: AFP logout by nobody Jul 30 00:29:08 freenas afpd[8972]: dsi_stream_read: len:0, unexpected EOF Jul 30 00:29:08 freenas afpd[8972]: afp_over_dsi: client logged out, terminating DSI session Jul 30 00:29:08 freenas afpd[8972]: AFP statistics: 0.14 KB read, 0.12 KB written Jul 30 00:29:14 freenas afpd[8975]: AFP3.3 Login by tbutler Jul 30 00:29:14 freenas afpd[8975]: AFP logout by tbutler Jul 30 00:29:14 freenas afpd[8975]: dsi_stream_read: len:0, unexpected EOF Jul 30 00:29:14 freenas afpd[8975]: afp_over_dsi: client logged out, terminating DSI session Jul 30 00:29:14 freenas afpd[8975]: AFP statistics: 0.62 KB read, 0.48 KB written Jul 30 00:29:20 freenas afpd[8978]: AFP3.3 Login by tbutler Jul 30 00:29:20 freenas afpd[8978]: AFP logout by tbutler Jul 30 00:29:20 freenas afpd[8978]: dsi_stream_read: len:0, unexpected EOF Jul 30 00:29:20 freenas afpd[8978]: afp_over_dsi: client logged out, terminating DSI session Jul 30 00:29:20 freenas afpd[8978]: AFP statistics: 0.62 KB read, 0.48 KB written Jul 30 00:29:27 freenas afpd[8983]: AFP3.3 Login by nobody (My clock is clearly not properly set, but be that as it may...) Any suggestions? UPDATE: Apparently this problem occurs if one gives the AFP share a password in the AFP share settings box. When I removed the password and tried to login using a user account again, it worked just fine.

  Read the article

• Overriding routes on Openvpn client, iproute, iptables2

  - by sarvavijJana

  I am looking for some way to route packets based on its destination ports switching regular internet connection and established openvpn tunnel. This is my configuration OpenVPN server ( I have no control over it ) OpenVPN client running ubuntu wlan0 192.168.1.111 - internet connected if Several routes applied on connection to openvpn from server: /sbin/route add -net 207.126.92.3 netmask 255.255.255.255 gw 192.168.1.1 /sbin/route add -net 0.0.0.0 netmask 128.0.0.0 gw 5.5.0.1 /sbin/route add -net 128.0.0.0 netmask 128.0.0.0 gw 5.5.0.1 And I need to route packets regarding it's destination ports for ex: 80,443 into vpn everything else directly to isp connection 192.168.1.1 What i have used during my attempts: iptables -A OUTPUT -t mangle -p tcp -m multiport ! --dports 80,443 -j MARK --set-xmark 0x1/0xffffffff ip rule add fwmark 0x1 table 100 ip route add default via 192.168.1.1 table 100 I was trying to apply this settings using up/down options of openvpn client configuration All my attempts reduced to successful packet delivery and response only via vpn tunnel. Packets routed bypassing vpn i have used some SNAT to gain proper src address iptables -A POSTROUTING -t nat -o $IF -p tcp -m multiport --dports 80,443 -j SNAT --to $IF_IP failed in SYN-ACK like 0 0,1 0,1: "70","192.168.1.111","X.X.X.X","TCP","34314 > 81 [SYN] Seq=0 Win=5840 Len=0 MSS=1460 TSV=18664016 TSER=0 WS=7" "71","X.X.X.X","192.168.1.111","TCP","81 > 34314 [SYN, ACK] Seq=0 Ack=1 Win=5792 Len=0 MSS=1428 TSV=531584430 TSER=18654692 WS=5" "72","X.X.X.X","192.168.1.111","TCP","81 > 34314 [SYN, ACK] Seq=0 Ack=1 Win=5792 Len=0 MSS=1428 TSV=531584779 TSER=18654692 WS=5" "73","192.168.1.111","X.X.X.X","TCP","34343 > 81 [SYN] Seq=0 Win=5840 Len=0 MSS=1460 TSV=18673732 TSER=0 WS=7" I hope someone has already overcome such a situation or probably knows better approach to fulfill requirements. Please kindly give me a good advice or working solution.

  Read the article

• Wordpress Directory Permission to allow uploads, plugin folders, etc

  - by user1015958

  I have a wordpress pre-made site which were developed on my localmachine, and i uploaded it too a vps running on debian6, using nginx, mysql, php. Following this guide: 1) Create an unprivilaged user, this could be say 'karl' or whatever, and make them belong to the www-data group. So that if I were to login as karl and create a web root in say /home/karl/www/ , all the files will be owned by karl:www-data 2) Set up nginx as the user www-data in nginx.conf 3) Set up PHP-FPM to run as www-data 4) Place your files in /home/karl/www/[domain name maybe]/public_html/, upload as 'karl' so you don't have to chown everything again. when i type ls -l inside public_html/ it shows that all the files inside are owned by karl:karl. But the public_html directory is owned by karl:www-data. I chmod 0755 the folder wp-content but i still get the error: ERROR: Path ../wp-content/connection_images does not seem to be writeable. I know i shouldn't set it too 777 due to security reason, how should i set it too proper permission? and what should i set also to allow my users to upload,write posts,edit articles? Sorry for my english by the way.

  Read the article

• Can I disable chrome's auto translate function for visitors to a given page on my site?

  - by Drew Noakes

  I know how to disable this feature for pages that I visit, but what I'm looking for is a way to tell other user's Chrome browsers not to offer translation a particular page on my site. Is there some kind of meta tag I can use? Alternatively, can I indicate that a particular element on the page should not be translated? Reason: The controls which slide down from the top of the page cause my page to resize, which changes the content, which makes the control slide up, which resizes the page, which changes the content, which causes the controls to slide back in. Rinse and repeat. The page dances. The page itself is a map, and the content it wants to translate are all proper names and shouldn't be translated anyway. If alternate names exist in other languages, I provide them myself. Generally I'm against taking away features from the browser that users might like, but in this case it really makes sense. So please don't answer saying that I shouldn't be doing this. I've weighed up the options.

  Read the article

• "The directory name is invalid" when trying to install drivers in Windows 7 via Device Manager

  - by Luke

  First off, this computer is not mine, it's a customer's system. Having said that... The hard drive was moved to a new motherboard, CPU, RAM combo, and booted up fine. Customer puts in driver CD, drivers won't load. He brings it into me. Under Device Manager for Windows 7 x64, I see lots of PCI to PCI bridge, one SMBus Controller, and about 20 Unknown Devices. Greeeeeat... So I start with the SMBus driver directly from the Asus website for the motherboard (P8H77-M Pro). If I install from the setup program, it tells me to reboot, then it starts the install. It gets half way through the setup, then fails (An unknown error occurred. Setup will exit). When I try to point to the folder from Device Manager, it starts copying files for the driver, even presents me with the proper name of the device, but says that an error has occurred there as well: The directory name is invalid. Doing some Googling, I saw that many people had this issue with Vista. K, Vista and 7 are similar, maybe the solutions are the same... But they aren't. I tried: Copying the entire driver folder and setup utility to the Program Files folder and running it / selecting it in DM Downloading another set of drivers in case this one is corrupt Disabling UAC Deleting and recreating the %WINDIR%\TEMP folder Removing all references to previous hardware that I could find, even in Device Manager's hidden mode So far, nothing has worked. A wipe and reload will be out of the question

  Read the article

• Upgrading memory on an IBM Power 710 Express (8231-E2B)

  - by cairnz

  We have a Power 710 Express server that was loaded with 4x4 GB memory on a single riser card. I have replaced the 4 chips with 4x8GB and put in another riser card and loaded it with 4x8GB more for a total of 64GB memory. The firmware is AL730_078. When i power it on, the service processor boots up and i can access the ASMi. From here I can look at "Memory Serial Presence Data" and see that the system in some way detects 8x8 GB. However when i look at Hardware Deconfiguration and specifically Memory Deconfiguration, it is still listed with old values, 16384MB, and claims there are 4x4 chips in the C17 riser. How do i proceed to make the server recognize properly the amount of memory installed? I get a FSPSP04 and B181B50F progress code on booting because (i think) it hasn't been told the memory has changed. It then does not proceed to booting the operating system (VIOS) when turned on. Are there any steps I have overlooked here? Can I do some commands, either on the service processor, or otherwise, to tell the system to configure with the proper amount of memory? PS: This is a stand alone server, not configured with HMC or SDMC.

  Read the article

• Configure an Azure VM for Dynamic DNS for Cloud Services

  - by Adam

  I am trying to setup an azure VM with proper DNS to allow multiple cloud services to communicate across cloud service boundaries. As I understand it, I need to provide my own DNS server. I do not have any on-premise infrastructure, so I am trying to configure an Azure VM to act as my DNS. This SO question (http://stackoverflow.com/questions/21858926/azure-how-to-connect-one-cloud-service-with-other-in-one-virtual-network) is very similar to my setup. This article (http://msdn.microsoft.com/en-us/library/windowsazure/jj156088.aspx) describes my particular case: Name resolution between virtual machines and role instances located in the same virtual network, but different cloud services Here is what I have done: Created Azure Virtual Network and declared subnets for each of my cloud services. Created an Azure VM (Windows 2012 R2) with DNS enabled RDP to the VM and enabled the DNS role and installed features Added the appropriate NetworkConfiguration xml section to each of my cloud services .csfg files Re-deployed my cloud services I have verified that I setup the virtual network and networkconfiguration properly because my cloud service hosts are able to communicate with each other if I use the internal ips. However, name resolution doesn't appear to be working, and it doesn't appear that my cloud service roles can communicate with my DNS server. How do I configure my VM so that my different cloud services roles register themselves with my DNS server? EDIT: I think I am 1 step closer to getting this to work. The cloud services that I was using are in an old affinity group which is not supported by VMs, so I was unable to add my VM into my virtual network. I created a new VNET in a new affinity group with my VM added into it. However, I still don't know how to configure the azure VM's DNS server so that the cloud services register themselves for name resolution. Also, an added bonus guaranteed to get a +1 would be to explain if it is possible to register a DNS entry for the VIP for an internal endpoint of my cloud services so we can get load balancing. Thanks!

  Read the article

• Windows 7 Multi-NIC woes

  - by Eric

  I have Comcast business Internet here. It gives me 5 static IPs. Most of the machines in my house connect to a router like every other household. It has a 192.168.117.x subnet, DHCP Server, etc. and all is well. However, I have a second machine on MY desk that has a life Internet IP. Up until yesterday, this machine was running XP Pro. The primary NIC was manually set to 192.168.117.241 with no gateway, and the secondary NIC was manually set to 173.x.x.171 with a gateway of 173.x.x.174. This worked just fine for years. Yesterday I replaced that XP machine with a brand new Windows 7 x64 box. Again, I configured it the same way. The onboard NIC was given a static 192.168.117.x address with no gateway, and the secondary NIC was given a live Internet IP address with the proper router, etc. 2 Problems. First is that the internal network (192.168.117.x) is listed as a public network because there's no gateway, so that means no homegroup, no file sharing, none of that. And I can't change it from what I'm reading... The second is that the machine reports the "router" ip address as it's address, and not the address that it's supposed to. I'm ready to tear my hair out over this. Any ideas?

  Read the article

• Moving symlinks into a folder based on id3 tags.

  - by Reti

  I'm trying to get my music folder into something sensible. Right now, I have all my music stored in /home/foo so I have all of the albums soft linked to ~/music. I want the structure to be ~/music/<artist>/<album> I've got all of the symlinks into ~/music right now so I just need to get the symlinks into the proper structure. I'm trying to do this by delving into the symlinked album, getting the artist name with id3info. I can do this, but I can't seem to get it to work correctly. for i in $( find -L $i -name "*.mp3" -printf "%h\n") do echo "$i" #testing purposes #find its artist #the stuff after read file just cuts up id3info to get just the artist name #$artist = find -L $i -name "*.mp3" | read file; id3info $file | grep TPE | sed "s|.*: \(.*\)|\1|"|head -n1 #move it to correct artist folder #mv "$i" "$artist" done Now, it does find the correct folder, but every time there is a space in the dir name it makes it a newline. Here's a sample of what I'm trying to do $ ls DJ Exortius/ The Trance Mix 3 Wanderlust - DJ Exortius [TRANCE DEEP VOCAL TECH]@ I'm trying to mv The Trance Mix 3 Wanderlust - DJ Exortius [TRANCE DEEP VOCAL TECH]@ into the real directory DJ Exortius. DJ Exortius already exists, so it's just a matter of moving it into the correct directory that's based on the id3 tag of the mp3 inside. Thanks! PS: I've tried easytag, but when I restructure the album, it moves it from /home/foo which is not what I want.

  Read the article

• 16TB Volumes and SNMP On Windows

  - by John K

  As volumes larger than 16TB became more common, it was recognized that the 32 bit value used to report disk size and usage within the standard "HOST-RESOURCES" MIB in SNMP was not large enough to report the proper disk size. Net-SNMP seems to have addressed this issue by simply manipulating the value of "AllocationUnits" to maintain a 32 bit value for disk utilization (since total disk size/usage is equal to the 32 bit space value times the allocation unit), to allow for the calculation of a volume larger than 8/16TB. Presuming you don't have any reporting interest in the allocation unit, this seems like a fine solution. https://bugzilla.redhat.com/show_bug.cgi?id=654384 Window's built in SNMP service, however, seems to continue to suffer from this error, simply reporting the modulo of the used/assigned disk space, resulting in inaccurate disk size reporting. Is there a way to enable Windows to correctly report disk usage for volumes over 16TB? We attempted to simply install Net-SNMP 5.5 x64 and disable Windows SNMP service entirely, however this unfortunately did not fix our issue. I've seen people in the Cacti community mention simply scripting out a solution. Unfortunately, we're using Observium for quick and basic systems monitoring. If the issue can't be correct on the Window's side, can Observium be made to report custom MIBs?

  Read the article

• .NET 3.5 installation comes up with Error 0x800F0906, then 0x800F0081F using dism

  - by Austin Meadows

  I've recently tried installing .NET 3.5 for an application on Windows 8.1. I used the OS's popup thing to download/install .NET 3.5 and always get error code 0x800F0906. Upon further research, I found I would have to pop in my Windows 8 CD and install it with this command, where "E:\" is where my CD is mounted: Dism /online /enable-feature /featurename:NetFx3 /All /Source:E:\sources\sxs /LimitAccess This and any derivative of it (e.g., removing /LimitAccess) has not worked for me and has either given me the same error code (0x800F0906) or a different one, 0x800F0081F. I've even copied the sxs folder to my hard drive, just in case something was going on with the CD Drive, only to have the same results. In that case, I used this command line: Dism /online /enable-feature /featurename:NetFx3 /All /Source:C:\dotnet35 /LimitAccess I find this surreal because in both cases, the files are indeed there but the program thinks it's not. Here's the CBS.log file. Any ideas on how to fix this? Any help is very appreciated :) EDIT: I now have a proper dism.log file, I'm not sure what happened to the last one or why it did that. Here's the link to the new log file. It's interesting to note that it doesn't recognize some of the commands in the script such as "featurename" or "source".

  Read the article

• Understanding mail failure notices, 554

  - by goran

  I'd like to confirm the meaining of a mail failure notice. Here's the message Hi. This is the qmail-send program at mydomain.com I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. <[email protected]>: 1.2.3.4 does not like recipient. Remote host said: 554 <[email protected]>: Relay access denied Giving up on 1.2.3.4 The way I understand this is, that 1.2.3.4 is not setup to receive mail for this domain. dig domain.com MX shows ;; ANSWER SECTION: domain.com. 6245 IN MX 10 mail.domain.com. domain.com. 6245 IN MX 20 mx.anotherdomain.com. (1.2.3.4 is mx.anotherdomain.com.). The puzzling part is that I have reports that messages sent from gmail get delivered to this address. P.S. Is this a proper question for serverfault?

  Read the article

• How do I find funny pictures?

  - by Hanno Fietz

  No, not lolcats. And I'm not really looking for a specific site, either. I have often wished that I had some funny picture to illustrate a presentation, a website, a post, an email, or something else. Google image search and stock photo services have hardly ever helped me, although that may be because I'm doing something wrong. Jeff Atwood seems to have no problem to find funny pictures for his codinghorror and stackoverflow blogs, as well as for the error messages on the trilogy sites. One of my favourites was this elephant. Other bloggers also seem to be quite good at it. I'm wondering if I simply lack the creativity or if there's sources or methods I don't know about. I could think of the following ways to get pictures, but I'm not sure whether this is really "how they do it". keep a collection of pictures that you stumbled upon and liked (takes quite some time to build up to a proper library), when you need a picture, there's one in there maybe have pictures on paper, too, like from magazines or ads. when you are looking for a picture, search online (Flickr, Google, stock photos). This has never really worked for me, I don't know why. produce the pictures yourself, i. e. have a good library of source material or find some online and apply some creativity and suitable software. I could imagine that this could work well once you have the practice.

  Read the article

• List symlinks in specific relative directories

  - by Clinton Blackmore

  I have a server that shares out user home folders over the network. Each user has a Cache folder. Sometimes a symlink is used to redirect this folder to the hard drive of whichever machine they are using (and sometimes that doesn't work and they have a broken symlink [which is a matter for another day].) I'm trying to find out which users have symlinks and which don't. Within the shared folder, to get to the Cache folder you would substitute folders like so: $GRADE/$USERNAME/Library/Caches Right now I'm searching to see which users have symlinks and which do not. I've come up with: cd /path/to/shared/home/folders sudo find . -name "Caches" -exec ls -ld {} \; and get results like this: lrwxr-xr-x@ 1 name0 ES_Students 27 Jan 18 11:05 ./CES_Grade_03/name0/Library/Caches -> /tmp/name0/Library/Caches drwx------ 11 name1 ES_Students 374 Dec 8 15:44 ./CES_Grade_03/name1/Library/Caches lrwxr-xr-x@ 1 name2 ES_Students 27 Feb 23 14:27 ./CES_Grade_03/name2/Library/Caches -> /tmp/name2/Library/Caches drwx------ 17 name3 ES_Students 578 Jan 25 11:13 ./CES_Grade_03/name3/Library/Caches drwx------ 12 name4 ES_Students 408 Mar 22 13:09 ./CES_Grade_03/name4/Library/Caches but it nags at me that there must be a better way. Yes, it is good enough, and a one-off task, but I want to know how to do it right! Surely, I should be able to do something like: cd /path/to/shared/home/folders sudo ls -ld **/**/Library/Caches I'm afraid that I don't know the proper syntax or if there is a recursive folder-replacing wildcard format in bash, and my google-fu failed me. So, how do I properly formulate the search?

  Read the article

< Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >