Search Results

Search found 35121 results on 1405 pages for 'sql stored procedure'.

Page 1366/1405 | < Previous Page | 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373  | Next Page >

  • Setup Custom Portal & Content Enabled Domain

    - by Stefan Krantz
    When overlooking the past year we have seen a large increase in deployments where only some parts of the WebCenter Suite infrastructure has been used. The most common from my personal perspective is a domain topology that includes: WebCenter Custom Portal, WebCenter Content and Oracle HTTP ServicesToday its very common to see installation where the whole suite is installed when the use case only requires the custom portal and some sub component like WebCenter Content. This post will go into detail on how to minimize the deployment time and effort by only laying down the necessary managed servers needed, by following this proposed method you will minimize the configuration steps and only install the required components and schema's, configure only the necessary components and minimize the impact of architectural changes through reduced dependencies. Assumptions: Oracle 11g Database installed SYS or equivalent access to Database to setup schema's via RCU Running Operating System supporting JDK 7 Update 2 (Check support matrix here) Good understanding of WebLogic Architecture Binaries: Oracle JDK 7 Update 2 (1.7.0_02) (Download) Oracle WebLogic 10.3.6 (Download) Oracle WebCenter Binaries (11.1.1.6) (Download) Oracle WebCenter Content Binaries (11.1.1.6) (Download 1) (Download 2) Oracle HTTP Services (11.1.1.6) (Download) Oracle Repository Creation Utility (11.1.1.6) (Download Linux or Windows) Schema's: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} MDS - Meta Data Services (WebCenter and OWSM) WebCenter (WebCenter Schema) OCS (Oracle WebCenter Content) Activities (WebCenter Activities) OPSS (Policy Store for WebCenter) Installation Structure: - [Installation Home]/Middleware    - Oracle_WC1 (WebCenter Installation)    - Oracle_WT1 (Oracle WebTier)    - Oracle_ECM (WebCenter Content)    - wlserver_10.3 (Weblogic installation)- [Installation Home]/domains    - webcenter (WebCenter Domain)    - instances (OHS/OPMN instance)- [Installation Home]/applications- [Installation Home]/JDK1.7.0_02 Installation and Configuration Steps: Install Java and configure Java Home Extract the Java Installable (jdk-7u2-linux-x64) to [Installation Home]/JDK1.7.0_02 Add JAVA_HOME to Environment Settings (JAVA_HOME=[Installation Home]/JDK1.7.0_02) Update PATH in Environment Settings (PATH=$JAVA_HOME/bin:$PATH) Install WebLogic Server (Middleware Home) Run the installer / execute jar file (java - jar wls1036_generic.jar) Create the Middleware Home under [Installation Home]/Middleware Install WebCenter Portal (Extend Middleware Home) Extract the compressed file (ofm_wc_generic_11.1.1.6.0_disk1_1of1.zip) to a temp folder Execute runInstaller under folder (DISK1/) with following command (runInstaller -jreLoc $JAVA_HOME) Make sure to install in following structure ([Installation Home]/Middleware/Oracle_WC1) Install WebCenter Content (Extend Middleware Home) Extract the compressed files (ofm_wcc_generic_11.1.1.6.0_disk1_1of2.zip & ofm_wcc_generic_11.1.1.6.0_disk1_2of2.zip) to the same temp folder Execute runInstaller under folder (DISK1/) with following command (runInstaller -jreLoc $JAVA_HOME) Make sure to install in following structure ([Installation Home]/Middleware/Oracle_ECM) Configure Initial Domain (Domain name webcenter) Execute configuration tool - [Installation Home]/Middleware/wlserver_10.3/common/bin/config Select "Create a New Weblogic Domain" Select following template (Basic Weblogic Server Domain, Oracle Enterprise Manager, Oracle WSM Policy Manager, Oracle JRF) Create new domain with name webcenter under following location ([Installation Home]/domains) for applications ([Installation Home]/applications) Select Production Mode Finish Configuration wizard Setup username for startup scripts - Add a new file called boot.properties to ([Installation Home]/domains/webcenter/servers/AdminServer/security)Add following lines to boot.propertiesusername=weblogicpassword=[password clear text, it will be encrypted during first start] Start AdminServer in the background ([Installation Home]/domains/webcenter/bin/startWeblogic) Install and Configure Oracle WebTier (OHS Server) Extract compressed file (ofm_webtier_linux_11.1.1.6.0_64_disk1_1of1.zip) to a temp folder Execute runInstaller under folder (DISK1/) with following command (runInstaller) Select Install & Configure option Deselect Oracle WebCache Auto Configure Ports Configure Schema's with RCU (Repository Creation Utility) Extract compressed file (ofm_rcu_linux_11.1.1.6.0_disk1_1of1.zip) to a temp folder Execute rcu with following command ([temp]/rcuHome/rcu) Make sure database meets RCU requirements, particular (PROCESSES is 200 or more) Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Using SQLPLUS and sys user tou can update this configuration in the database with following procedure:ALTER SYSTEM SET PROCESSES=200 SCOPE=SPFILE shutdown immediate startup Create and Configure following schemas:MDS - Meta Data Services (WebCenter and OWSM)WebCenter (WebCenter Schema)OCS (Oracle WebCenter Content)Activities (WebCenter Activities)OPSS (Policy Store for WebCenter) Remember selected schema prefix and password (will be used later) Configure WebCenter Portal instance (WC_CustomPortal) Execute following command to start configuration wizard ([Installation Home]/Middleware/Oracle_WC1/common/bin/config) Select Extend an Existing WebLogic domain Select the existing webcenter domain ([Installation Home]/domains/webcenter) Select Extend my domain using existing extension templateBrowse to ([Installation Home]/Middleware/Oracle_WC1/common/templates/applications)Select oracle.wc_custom_portal_template_11.1.1.jar Select to configure (Managed Servers/Clusters/Machines) On the Managed Server Screen you can now configure 1 or more WC_CustomPortal managed servers (name them WC_CustomPortal[n] (skip numbering if not clustered)) In case of two WC_CustomPortal Servers then create a Cluster (any name) and make sure the managed servers join the new cluster Create a new machine with same name as the current machine Make sure the AdminServer and WC_CustomPortal[n] managed servers joins the machine Finish the configuration wizard Stop AdminServer ([Installation Home]/domains/webcenter/bin/stopWeblogic) Start AdminServer in the background ([Installation Home]/domains/webcenter/bin/startWeblogic) Start WC_CustomPortal in the foreground (([Installation Home]/domains/webcenter/bin/startManagedServer WC_CustomPortal))- repeat for each WC_CustomPortal instance on the host Give credentials for weblogic user on start up Copy folder security including file boot.properties - from ([Installation Home]/domains/webcenter/servers/AdminServer/) to ([Installation Home]/domains/webcenter/servers/WC_CustomPortal/) Result should be ([Installation Home]/domains/webcenter/servers/WC_CustomPortal/security/boot.properties) Configure WebCenter Content instance (UCM_server1) Execute following command to start configuration wizard ([Installation Home]/Middleware/Oracle_ECM/common/bin/config) Select Extend an Existing WebLogic domain Select Oracle Universal Content Management - Content Server Select to configure (Managed Servers/Clusters/Machines) On Managed Server Screen create only one managed server instance (UCM_server1 on port 16200 (you can select any other available port)) Make sure the UCM_server1 managed server joins the machine Finish the configuration wizard Stop AdminServer ([Installation Home]/domains/webcenter/bin/stopWeblogic) Start AdminServer in the background ([Installation Home]/domains/webcenter/bin/startWeblogic) Start UCM_server1 in the foreground ([Installation Home]/domains/webcenter/bin/startManagedServer UCM_server1)Give credentials for weblogic user on start up Copy folder security including file boot.properties - from ([Installation Home]/domains/webcenter/servers/AdminServer/) to ([Installation Home]/domains/webcenter/servers/UCM_server1/ Result should be ([Installation Home]/domains/webcenter/servers/UCM_server1/security/boot.properties) Post Configure WebCenter Content instance for WebCenter Portal Open a browser where you have support for Java applets - navigate to http://host:port/cs WARNING: The page that you are presented with after authentication will only appear once for each instance WARNING: Make sure you set correct storage options - also remember to consider file sharing options if you like to cluster your Content Server instance over multiple hosts Set an appropriate Auto number prefix Update the Server Socket Port: Commonly set to (4444)  used for RIDC communication (a requirement for WebCenter Portal) Update the IP Address Filter to include the IP that is planned to access the server over RIDC - at the minimum add the ip address of the current host (this option can be updated later via EM) Stop UCM_server1 ([Installation Home]/domains/webcenter/bin/stopManagedServer UCM_server1) Start UCM_server1 in the background([Installation Home]/domains/webcenter/bin/startManagedServer UCM_server1) Open a browser where you have support for Java applets - navigate to http://host:port/cs Navigate to Administration/Admin Server Go to General ConfigurationCheck Enable AccountsIn Additional Configuration Variables (Add on two lines) Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} AllowUpdateForGenwww=1CollectionUseCache=1 Save the changes and go to Component Manager Click on the link advanced component manager Enable following components Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Folders_g, WebCenterConfigure, SiteStudio, SiteStudioExternalApplications, DBSearchContainsOpSupport WARNING: Make sure that following component is disabled: FrameworkFolders Stop UCM_server1 ([Installation Home]/domains/webcenter/bin/stopManagedServer UCM_server1) Start UCM_server1 in the background([Installation Home]/domains/webcenter/bin/startManagedServer UCM_server1) Open a browser where you have support for Java applets - navigate to http://host:port/cs Navigate to Administration/Site Studio Administration and update - Do not forget to save and submit each page Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Set Default ProjectSet Default WebAssets Post Configure Oracle WebTier (OHS) to include Content Server and WebCenter Portal application context Update following file - [Installation Home]/domains/instances/instance1/config/OHS/ohs1/mod_wl_ohs.conf For single add lines from following example: Link For clustered environment add lines from following template (note the clustering in example on applies to WC_CustomPortal): Link For more information on this: http://docs.oracle.com/cd/E23943_01/core.1111/e12037/contentsvr.htm#WCEDG318 Optional - Configure JOC Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Follow instructions: http://docs.oracle.com/cd/E23943_01/core.1111/e12037/extend_wc.htm#WCEDG264 Optional (Recommended) - Configure Node Manager Follow instructions: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} http://docs.oracle.com/cd/E23943_01/core.1111/e12037/node_manager.htm#WCEDG277 Optional (Mandatory for clustered environments) - Re-Associate Policy Store to Database or OID Follow instructions: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} http://docs.oracle.com/cd/E23943_01/webcenter.1111/e12405/wcadm_security_credstore.htm#CFHDEDJH Optional - Configure Coherence for Content Presenter Follow instructions in Blog Post (This post is for PS4): https://blogs.oracle.com/ATEAM_WEBCENTER/entry/enabling_coherence_for_content_presenter Other Recommended Post Cloning WebCenter Custom Portal - https://blogs.oracle.com/ATEAM_WEBCENTER/entry/cloning_a_webcenter_portal_managedImproving WebCenter Performance through caching - https://blogs.oracle.com/ATEAM_WEBCENTER/entry/improving_webcenter_performance

    Read the article

  • Tools to Help Post Content On Your WordPress Blog

    - by Matthew Guay
    Now that you’ve got a nice blog, you want to do more with it and start posting content.  Here we look at some tools that will allow you to post directly to your WordPress blog. Writing a new blog post is easy with WordPress as we saw in our previous post about Starting your own WordPress blog.  The web editor gives you a lot of features and even lets you edit your post’s source code if you enjoy hacking HTML.  There are other tools that will allow you to post content, here we look at how you can post with dedicated apps, browser plugins, and even by email. Windows Live Writer Windows Live Writer (part of the Windows Live Essentials Suite) is a great app for posting content to your blog.  This free program for Microsoft lets you post content to a variety of blogging services, including Blogger, Typepad, LiveJournal, and of course WordPress.  You can write blog posts directly from its Word-like editor, complete with pictures and advanced formatting.  Even if you’re offline, you can still write posts and save them for when you’re online again. For more information about installing Live writer, check out our article on how to Install Windows Live Essentials In Windows 7. Once Live Writer is installed, open it to add your blog.  If you already had Live Writer installed and configured for a blog, you can add your new blog, too.  Just click your blog’s name in the top right corner, and select “Add blog account”. Select “Other blog service” to add your WordPress blog to Writer, and click Next.   Enter your blog’s web address, and your username and password.  Check Remember my password so you don’t have to enter it every time you write something. Writer will analyze your blog and setup your account. During the setup process it may ask to post a temporary post.  This will let you preview blog posts using your blog’s real theme, which is helpful, so click Yes. Finally, add your Blog’s name, and click Finish. You can now use the rich editor to write and add content to a new blog post.   Select the Preview tab to see how your post will look on your blog… Or, if you’re a HTML geek, select the Source tab to edit the code of your blog post. From the bottom of the window, you can choose categories, insert tags, and even schedule the post to publish on a different day.  Live Writer is fully integrated with WordPress; you’re not missing anything by using the desktop editor. If you want to edit a post you’ve already published, click the Open button and select the post.  You can chose and edit any post, including ones you published via the web interface or other editors. Add Multimedia Content to your Posts with Live Writer Back in the Edit tab, you can add pictures, videos and more from the sidebar.  Select what you want to insert. Pictures If you insert a picture, you can add many nice borders and designs to it. Or, you can even add artistic effects from the Effects tab in the sidebar. Photo Gallery If you want to post several pictures, say some of your vacation shots, then inserting a picture gallery may be the best option.  Select Insert Photo Gallery in the sidebar, and then choose the pictures you want in the gallery. Once the gallery is inserted, you can choose from several styles to showcase your pictures. When you post the blog, you will be asked to sign in with your Windows Live ID as the gallery pictures will be stored in the free Skydrive storage service. Your blog readers can see the preview of your pictures directly on your blog, and then can view each individual picture, download them, or see a slideshow online via the link. Video If you want to add a video to your blog post, select Video from the sidebar as above.  You can select a video that’s already online, or you can choose a new video from file and upload it via YouTube directly from Windows Live Writer.   Note that you will have to sign in with your YouTube account to upload videos to YouTube, so if you’re not logged in you’ll be prompted to do so when you click Insert. Geek Tip:  If you ever want to copy your Live Writer settings to another computer, check out our article on how to Backup Your Windows Live Writer Settings. Microsoft Office Word Word 2007 and 2010 also let you post content directly to your blog.  This is especially nice if you’ve already typed up a document and think it would be good on your Blog as well.  Check out our in-depth tutorial on posting blog posts via Word 2007 using Word 2007 as a blogging tool. This works in Word 2010 too, except the Office Orb has been replaced by the new Backstage view.  So, in Word 2010, to start a new blog post, click File \ New then select Blog post.  Proceed as you would in Word 2007 to add your blog settings and post the content you want. Or, if you’ve already written a document and want to post it, select File \ Share (or Save and Send in the final version of Word 2010), and then click Publish as Blog Post.  If you haven’t setup your blog account yet, set it up as shown in the Word 2007 article. Post Via Email Most of us use email daily, and already have our favorite email app or service.  Whether on your desktop or mobile phone, it’s easy to create rich emails and add content.  WordPress lets you generate a unique email address that you can use to easily post content and email to your blog.  Just compose your email with the subject as the title of your post, and send it to this unique address.  Your new post will be up in minutes. To active this feature, click the My Account button in the top menu bar in your WordPress.com account, and select My Blogs. Click the Enable button under Post by Email beside your blog’s name.   Now you’ll have a private email you can use to post to your blog.  Anything you send to this email will be posted as a new post.  If you think your email may be compromised, click Regenerate to get a new publishing email address. Any email program or webapp now is a blog post editor.  Feel free to use rich formatting or insert pictures; it all comes through great.  This is also a great way to post to your blog from your mobile device.  Whether you’re using webmail or a dedicated email client on your phone, you can now blog from anywhere.   Mobile Applications WordPress also offer dedicated applications for blogging directly from your mobile device.  You can write new posts, edit existing ones, and manage comments all from your Smartphone.  Currently they offer apps for iPhone, Android, and Blackberry.  Check them out at the link below. Conclusion Whether you want to write from your browser or email a post to your blog, WordPress is flexible enough to work right along with your preferences.  However you post, you can be sure that it will look professional and be easily accessible with your WordPress blog. Download Windows Live Writer Download WordPress apps for your mobile device Similar Articles Productive Geek Tips Quick Tip: Set a Future Date for a Post in WordPressAdd Social Bookmarking (Digg This!) Links to your Wordpress BlogFuture Date a Post in Windows Live WriterHow To Start Your Own Professional Blog with WordPressUsing Word 2007 as a Blogging Tool TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Fun with 47 charts and graphs Tomorrow is Mother’s Day Check the Average Speed of YouTube Videos You’ve Watched OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott

    Read the article

  • Convert a DVD Movie Directly to AVI with FairUse Wizard 2.9

    - by DigitalGeekery
    Are you looking for a way to backup your DVD movie collection to AVI?  Today we’ll show you how to rip a DVD movie directly to AVI with FairUse Wizard. About FairUse Wizard FairUse Wizard 2.9 uses the DivX, Xvid, or h.264 codec to convert DVD to an AVI file. It comes in both a free version and commercial version. The free, or “Light” version, can create files up 700MB while the commercial version can output a 1400MB file. This will allow you to back up your movies to CD, or even multiple movies on a single DVD. FairUse Wizard states that it does not work on copy protected discs, but we’ve seen it work on all but some of the most recent copy protection. For this tutorial we’re using the free Light Edition to convert a DVD to AVI. They also offer a commercial version that you can get for $29.99 and it offers even more encoding possibilities for converting video to you portable digital devices. Installation and Configuration Download and install FairUse Wizard. (Download link below). Once the install is complete, open FairUse Wizard by going to Start > All Programs >  FairUse Wizard 2 >  FairUse Wizard 2.   FairUse Wizard will open on the new project screen. Select “Create a new project” and type a project name into the text box. This will be used as the file output name.  Ex: A project name of Simpsons Movie will give you an output file of Simpsons Movie.avi.   Next, browse for a destination folder for the output file and temp files. Note that you will need a minimum of 6 GB of free disk space for the conversion process. Note: Much of that 6 GB will be used for temporary files that we will delete after the conversion process.   Click on the Options button at the bottom.   Under Preferences, choose your preferred video codec and file output size. XviD and x264 are installed by default. If you prefer to use DivX, you will have to install it separately. Also note the “Two pass” option. Checking the “Two pass” box will encode your video twice for higher quality, but will take more time. Un-checking the box will speed up the conversion process.   Under Audio track, note that English subtitles are enabled by default, so to remove the subtitles, you will need to change the dropdown list so it shows only a dash (-). You can also select “Use TV Mode” if your primary playback will be on a 4:3 TV screen. Click “Next.” Full Auto Mode vs. Manual Mode You should now be back to the initial screen. Next, we’ll need to determine whether or not we can use “Full Auto Mode” to convert the movie. The difference is that “Full Auto Mode” will automatically perform a few steps that you will otherwise have to do manually. If you choose the “Full Auto Mode” option, FairUse Wizard will look for the video on the DVD with the longest duration and assume it is the chain that it should convert to AVI. It’s possible, however, your disc may contain a few chains of similar size, such as a theatrical cut and director’s cut, and the longest chain may not be the one you wish to convert. Make sure that “Full auto mode” is not checked yet, and click “Next.”   FairUse Wizard will parse the IFO files and display all video chains longer than 60  seconds. In most cases, you will only find that the largest chain is the one closely matching the duration of the movie. In these instances, you can use “Full Auto Mode.” If you find more than one chain that are close in duration to the length of the movie, consult the literature on the DVD case, or search online, to find the actual running time of the movie. If the proper file chain is not the longest chain, you won’t be able to use “Full Auto Mode.”   Full Auto Mode To use “Full Auto Mode,” simply click the “Back” button to return to the initial screen Now, place a check in the “Full auto mode” check box. Click “Next.” You will then be prompted to chose your DVD drive, then click “OK.” FairUse Wizard will parse the IFO files… … and then prompt you to Select your drive that contains the DVD one more time before beginning the conversion process. Click “OK.”   Manual Mode If you cannot (or don’t wish to) use Full Auto Mode, choose the appropriate video chain and click “Next.” FairUse Wizard will first go through the process of indexing the video. Note: If you get a runtime error during this portion of the process, it likely means that FairUse Wizard cannot handle the copy protection, and thus cannot convert the DVD. FairUse Wizard will automatically detect a cropping region. If necessary, you can edit the cropping region by adjusting the cropping region settings to the left. Click “Next.” Next, click “Auto Detect” to choose the proper field combination. Click “OK” on the pop up window that displays your Field Mode. Then click “Next.” This next screen is mainly comprised of settings from the Options screen. You can make changes at this point such as codec or output size. Click “Next” when ready.   Video Conversion Now the video conversion process will begin. This may take a few hours depending on your system’s hardware. Note: There is a check box to “Shutdown computer when done” if you choose to run the conversion overnight or before leaving for work. The first phase will be video encoding… Then the audio… If you chose the “Two Pass” option, your video video will be encoded again on 2nd pass. Then you’re finished. Unfortunately, FairUse Wizard doesn’t clean up after itself very well. After the process is complete, you’ll want to browse to your output directory and delete all the temporary files as they take up a considerable amount of hard drive space. Now you’re ready to enjoy your movie. Conclusion FairUse Wizard is a nice way to backup your DVD movies to good quality .avi files. You can store them on your hard drive, watch them on a media PC, or burn them to disc. Many DVD players even allow for playback of DivX or XviD encoded video from a CD or DVD. For those of you with children, you can burn that AVI file to CD for your kids, and keep your original DVDs stored safely out of harms way. Download Download FairUse Wizard 2.9 LE Similar Articles Productive Geek Tips Kantaris is a Unique Media Player Based on VLCHow to Make/Edit a movie with Windows Movie Maker in Windows VistaAutomatically Mount and View ISO files in Windows 7 Media CenterTune Your ClearType Font Settings in Windows VistaAdd Images and Metadata to Windows 7 Media Center Movie Library TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet How to Find Your Mac Address Use My TextTools to Edit and Organize Text

    Read the article

  • Turn A Flash Drive Into a Portable Web Server

    - by Matthew Guay
    Portable applications are very useful for getting work done on the go, but how about portable servers?  Here’s how you can turn your flash drive into a portable web server. Getting Started To put a full web server on our flash drive, we’re going to use XAMPP Lite.  This lightweight, preconfigured server includes recent versions of Apache, MySQL, and PHP so you can run most websites and webapps directly from it.  You could use the full XAMPP, which includes more features such as a FileZilla FTP server and OpenSSL, but for most purposes, the light version is plenty for a portable server. Download the latest version of XAMPP Lite (link below).  In this tutorial, we used the self-extracting EXE version; you could choose the ZIP file and extract the files yourself, but we found it easier to use the executable. Run the installer, and click Browse choose where to install your server. Select your flash drive, or a folder in it, and click Ok.  Make sure your flash drive has at least 250MB of available storage space.  XAMPP will create an xampplite folder and store all the files in it during the installation.   Click Install, and all of the files will be extracted to your flash drive.  This may take a few moments depending on your flash drive’s speed. When the extraction process is finished, a Command Prompt window will open to finish the installation.  The first prompt will ask if you want to add shortcuts to the start menu and desktop; enter “n” since we don’t want to create start menu links to our portable server. Now enter “y” to configure XAMPP’s directories automatically. Finally, enter “y” to make XAMPP fully portable.  It will set up the servers to run without specific drive letters so your server will run from any computer. XAMPP will finalize your changes; press Enter when everything is completed. Setup will automatically launch the command line version of XAMPP.  On first run, confirm that your time zone is correct. And that’s it!  You can now run XAMPP’s control panel by entering 1, or you can exit and run XAMPP from any other computer with your flash drive. To complete your portable webserver kit, you may want to install Portable Firefox or Iron Browser on your flash drive so you always have your favorite browser ready to use. Running your portable server Using your portable server is very simple.  Open the xampplite folder on your flash drive and launch xampp-control.exe. Click Start beside Apache and MySql to get your webserver running. Please note: Do not check the Svc box, as this will run the server as a Windows service.  To keep XAMPP portable, you do not want it running as a service! Windows Firewall may prompt you that it blocked the server; click Allow access to let your server run. Once they’re running, you can click Admin to open the default XAMPP admin page running from your local webserver.  Or, you can view it by browsing to http://localhost/ or http://127.0.0.1/ in your browser. If everything is working correctly, you should see this page in your browser.  Choose your default language… And then you’ll see the default XAMPP admin page.   Click the Status link on the left sidebar to make sure everything is running correctly. If you click the Admin button for MySql in the XAMPP Control Panel, it will open phpMyAdmin in your default browser.  Alternately, you can open the MySql admin page by entering http://localhost/phpmyadmin/ or http://127.0.0.1/phpmyadmin/ in your favorite browser. Now you can add your own webpages to your webserver.  Save all of your web files in the \xampplight\htdocs\ folder on your flash drive. Install WordPress in your portable server Since XAMPP Lite includes MySql and PHP, you can even run webapps such as WordPress, the popular CMS and blogging platform.  Download WordPress (link below), and extract the files to the \xampplite\htdocs folder on your flash drive. Now all of the WordPress files are stored in \xampplite\htdocs\wordpress on your flash drive. We still need to setup WordPress on our portable server.  Open your MySql admin page http://localhost/phpmyadmin/ to create a new database for WordPress.  Enter a name for your database in the “Create new database” box, and click Create. Click the Privileges tab on the top, and the select “Add a new User”.   Enter a username and password for the database, and then click the Go button on the bottom of the page. Using WordPress Now, in your browser, enter http://localhost/wordpress/wp-admin/install.php.  Click Create a Configuration File to continue. Make sure you have your Database name, username, and password we created previously, and click “Let’s Go!” Enter your WordPress database name, username, and password, leave the other two entries as default, and click Submit. You should now have the database all ready to go.  Click “Run the install” to finish installing WordPress. Enter a title, username, and password for your test blog, as well as your email address, and then click “Install WordPress”. You now have a portable install of WordPress.  Click “Log In” to  access your WordPress admin page. Enter your username and password, and click Log In. Here you can add pages, posts, themes, extensions, and anything else just like you would on a normal WordPress site.  This is a great way to experiment with WordPress without messing up your real website. You can view your portable WordPress site by entering http://localhost/wordpress/ in your address bar. Closing your server When you’re done running your test server, click the Stop button on each of the services and then click the Exit button in the XAMPP control panel.  If you press the exit button on the top of the window, it will just minimize the control panel to the tray.   Alternately, you can shutdown your server by running xampp_stop.exe from your xampplite folder. Conclusion XAMPP Lite gives you a great way to run a full webserver directly from your flash drive.  Now, anywhere you go, you can test and tweak your webpages and webapps from any Windows computer.  Links Download XAMPP Lite Download WordPress Similar Articles Productive Geek Tips BitLocker To Go Encrypts Portable Flash Drives in Windows 7How To Use BitLocker on Drives without TPMSpeed up Your Windows Vista Computer with ReadyBoostView and Manage Flash Cookies the Easy WayInstall and Run Applications from Your iPod, Flash Drive or Mp3 Player TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error

    Read the article

  • On automating a split-mirror ASM backup with EMC TimeFinder ...

    - by [email protected]
    Normal 0 21 false false false MicrosoftInternetExplorer4 st1\:*{behavior:url(#ieooui) } /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} Hi clerks,   Offloading the backup operation to another host using disk cloning could really improve the performance on highly busy databases ( 24x7, zero downtime and all this stuff ...) There are well know white papers on this subject, ASM included, but today Im showing you a nice way to automate the procedure using shell scripting with EMC TimeFinder technologies:   Assumptions: *********** ASM diskgroups name:   +data_${db_name} : asm data diskgroup +fra_${db_name} :  asm fra  diskgroup   EMC Time Finder sync groups name:   rac_${DB_NAME}_data_tf : data group rac_${DB_NAME}_fra_tf:   fra group     There are two scripts, one located on the production box ( bck_database.sh ) and the other one on the backup server node ( bck_database_mirror.sh ) The second one is remotly executed from the production host There are a bunch of variables along the code with selfexplanatory names I guess, anyway let me know if you want some help     #!/bin/ksh ### ###  Copyright (c) 1988, 2010, Oracle Corporation.  All Rights Reserved. ### ###    NAME ###     bck_database.sh ### ###    DESCRIPTION ###     Database backup on third mirror ### ###    RETURNS ### ###    NOTES ### ###    MODIFIED                                 (DD/MM/YY) ###    Oracle            28/01/10             - Creacion ###   V_DATE=`/bin/date +%Y%m%d_%H%M%S` V_FICH_LOG=`dirname $0`/trace_dir_location/`basename $0`.${V_DATE}.log exec 4>&1 tee ${V_FICH_LOG} >&4 |& exec 1>&p 2>&1     ADMIN_DIR=`dirname $0` . ${ADMIN_DIR}/setenv_instance.sh -- This script should set the instance vars like Oracle Home, Sid, db_name ... if [ $? -ne 0 ] then   echo "Error when setting the environment."   exit 1 fi   echo "${V_DATE} ####################################################" echo "Executing database backup: ${DB_NAME}" echo "####################################################################"   V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Sync asm data diskgroups ..." echo "####################################################################" sudo symmir -g rac_${DB_NAME}_data_tf establish -noprompt if [ $? -ne 0 ] then   echo "Error when sync asm data diskgroups"   exit 2 fi V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Verifying asm data disks ..." echo "####################################################################" sudo symmir -g rac_${DB_NAME}_data_tf -i 30 verify if [ $? -ne 0 ] then   echo "Error when verifying asm data diskgroups"   exit 3 fi     V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Sync asm fra diskgroups ..." echo "####################################################################" sudo symmir -g rac_${DB_NAME}_fra_tf establish -noprompt if [ $? -ne 0 ] then   echo "Error when sync asm fra diskgroups"   exit 4 fi V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Verifying asm fra disks ..." echo "####################################################################" sudo symmir -g rac_${DB_NAME}_fra_tf -i 30 verify if [ $? -ne 0 ] then   echo "Error when verifying asm fra diskgroups"   exit 5 fi   V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "ASM sync sucessfully completed!" echo "####################################################################"     V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Updating status ${DB_NAME} to BEGIN BACKUP ..." echo "####################################################################" sqlplus -s /nolog <<-!   whenever sqlerror exit 1   connect / as sysdba   whenever sqlerror exit   alter system archive log current;   alter database ${DB_NAME} begin backup; ! if [ $? -ne 0 ] then   echo "Error when updating database status to BEGIN backup"   exit 6 fi   V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Splitting asm data disks....." echo "####################################################################" sudo symmir -g rac_${DB_NAME}_data_tf split -noprompt if [ $? -ne 0 ] then   echo "Error when splitting asm data disks"   exit 7 fi   V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Updating status ${DB_NAME} to END BACKUP ..." echo "####################################################################" sqlplus -s /nolog <<-!   whenever sqlerror exit 1   connect / as sysdba   whenever sqlerror exit   alter database ${DB_NAME} end backup;   alter system archive log current; ! if [ $? -ne 0 ] then   echo "Error when updating database status to END backup"   exit 8 fi   V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Generating controlfile copies...." echo "####################################################################" rman<<-! connect target / run { allocate channel ch1 type DISK; copy current controlfile to '+FRA_${DB_NAME}/${DB_NAME}/CONTROLFILE/control_mount.ctl'; copy current controlfile to '+FRA_${DB_NAME}/${DB_NAME}/CONTROLFILE/control_backup.ctl'; } ! if [ $? -ne 0 ] then   echo "Error generating controlfile copies"   exit 9 fi V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Resync RMAN catalog ....." echo "####################################################################" rman<<-! connect target / connect catalog ${V_RMAN_USR}/${V_RMAN_PWD}@${V_DB_CATALOG} resync catalog; ! if [ $? -ne 0 ] then   echo "Error when resyncing RMAN catalog"   exit 10 fi   V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Splitting asm fra disks....." echo "####################################################################" sudo symmir -g rac_${DB_NAME}_fra_tf split -noprompt if [ $? -ne 0 ] then   echo "Error when splitting asm fra disks"   exit 11 fi     echo "WARNING!: Calling bck_database_mirror.sh host ${NODE_BCK_SERVER}..." ssh ${NODO_BCK_SERVER} ${ADMIN_DIR_BCK}/bck_database_mirror.sh if [ $? -ne 0 ] then   echo "Error, when remote executing the backup "   exit 12 fi V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Cleaning the archived redo logs already copied to tape ..." echo "####################################################################" rman<<-! connect target / connect catalog ${V_RMAN_USR}/${V_RMAN_PWD}@${V_DB_CATALOG} run { resync catalog; delete noprompt archivelog all backed up 1 times to device type sbt; } ! if [ $? -ne 0 ] then   echo "Error when cleaning the archived redo logs"   exit 13 fi echo "${V_DATE} ####################################################" echo "Backup sucessfully executed!!" echo "####################################################################" exit 0   ------------------------------------------------------------------------------ ------------------------** BACKUP SERVER NODE ** ----------------------------- ------------------------------------------------------------------------------   #!/bin/ksh ### ###  Copyright (c) 1988, 2010, Oracle Corporation.  All Rights Reserved. ### ###    ###    NAME ###     bck_database_mirror.sh ### ###    DESCRIPTION ###      Backup @ backup server ### ###    RETURNS ### ###    NOTES ### ###    MODIFIED                                 (DD/MM/YY) ###      Oracle                    28/01/10     - Creacion         V_DATE=`/bin/date +%Y%m%d_%H%M%S`   echo "${V_DATE} ####################################################"   echo "Starting ASM instance ..."   echo "####################################################################"   ${V_ADMIN_DIR}/start_asm.sh -- This script is supposed to start the ASM instance in the backup server   if [ $? -ne 0 ]   then     echo "Error when tying to start ASM instance."     exit 1   fi       . ${V_ADMIN_DIR}/setenv_asm.sh -- This script is supposed to set the env. variables of the ASM instance   if [ $? -ne 0 ]   then     echo "Error when setting the ASM environment"     exit 1   fi       V_DATE=`/bin/date +%Y%m%d_%H%M%S`   echo "${V_DATE} ####################################################"   echo "The asm diskgroups/disks dettected are the following ..."   echo "####################################################################"     sqlplus /nolog <<-!     whenever sqlerror exit 1     connect / as sysdba     whenever sqlerror exit     SET LINES 200     COL PATH FORMAT A25     SELECT DISK.MOUNT_STATUS, DISK.PATH, DISK.NAME, DISK_GROUP.NAME, DISK_GROUP.TOTAL_MB FROM V\$ASM_DISK DISK, V\$ASM_DISKGROUP DISK_GROUP WHERE DISK.GROUP_NUMBER=DISK_GROUP.GROUP_NUMBER; !       V_ADMIN_DIR=`dirname $0`   . ${V_ADMIN_DIR}/setenv_instance.sh -- This script is supposed to set the env. variables of the database instance   if [ $? -ne 0 ]   then     echo "Error when setting the database instance environment"     exit 1   fi     V_DATE=`/bin/date +%Y%m%d_%H%M%S`   echo "${V_DATE} ####################################################"   echo "Starting ${DB_NAME} in MOUNT mode..."   echo "####################################################################"   ${V_ADMIN_DIR}/start_instance_mount.sh -- This script is supposed to do a startup mount   if [ $? -ne 0 ]   then     echo "Error starting  ${DB_NAME} in MOUNT mode"     exit 1   fi   V_DATE=`/bin/date +%Y%m%d_%H%M%S`   echo "${V_DATE} ####################################################"   echo "Executing RMAN backup..."   echo "####################################################################"   rman<<-!   connect target /   connect catalog ${V_RMAN_USR}/${V_RMAN_PWD}@${V_DB_CATALOG}   run {   allocate channel ch1 type 'SBT_TAPE' parms'ENV=(TDPO_OPTFILE=/opt/tivoli/tsm/client/oracle/bin64/tdpo.opt)'; -- TDPO Media Library   crosscheck archivelog all;   backup tag BCK_CONTROLFILE_ST_${DB_NAME}   format 'ctl_%d_%s__%p_%t'   controlfilecopy '+FRA_${DB_NAME}/${DB_NAME}/CONTROLFILE/control_backup.ctl';   backup tag BCK_DATAFILE_ST_${DB_NAME} full   format 'db_%d_%s_%p_%t'database;   backup tag BCK_ARCHLOG_ST_${DB_NAME} format 'al_%d_%s_%p_%t' archivelog all;   release channel ch1;   } !   if [ $? -ne 0 ]   then     echo "Error executing the RMAN backup"     exit 1   fi     ${V_ADMIN_DIR}/stop_instance_immediate.sh -- This script is supposed to do a shutdown immediate of the database instance   ${ADMIN_DIR}/stop_asm_immediate.sh -- This script is supposed to do a shutdown immediate of the ASM instance   exit 0     fi   Hope it helps someone! --L

    Read the article

  • Surface development: it&rsquo;s just like software development

    - by Dennis Vroegop
    Surface is magic. Everyone using it seems to think that way. And I have to be honest, after working for almost 2 years with the platform I still get that special feeling the moment I turn on the unit to do some more work. The whole user experience, the rich environment of the SDK, the touch, even the look and feel of the Surface environment is so much different from the stuff I’ve been working on all my career that I am still bewildered by it. But… and this is a big but.. in the end we’re still talking about a computer and that needs software to become useful. Deep down the magic of the Surface unit there is a PC somewhere, running Windows Vista and the .net framework 3.5. When you write that magic software that makes the platform come alive you’re still working with .net, WPF/XNA, C#, VB.Net and all those other tools and technologies you know so well. Sure, the whole user experience is different from what you’ve known. And the way of thinking about users, their interaction and the positioning of screen elements requires a whole new paradigm. And that takes time. It took me about half a year before I had the feeling I got it nailed down. But when that moment came (about 18 months ago…) I realized that everything I had learned so far on software development still is true when it comes to Surface. The last 6 months I have been working with some people with a different background to start a new company. The idea was that the new company would be focussing on Surface and Surface only. These people come from a marketing background and had some good ideas for some applications. And I have to admit: their ideas were good. Very good. Where it all fell down of course is that these ideas need to be implemented in a piece of software. And creating great software takes skilled developers and a lot of time and money. That’s where things went wrong: the marketing guys didn’t realize and didn’t want to realize that software development is a job that takes skill. You can’t just hire a bunch of developers and expect them to deliver the best sort of software, especially not when it comes to Surface. I tried to explain that yes, their User Interface in Photoshop looked great, but no: I couldn’t develop an application like that in a weeks time. Even worse: the while backend of the software (WCF for communications, SQL Server for the database, etc) would take a lot more time than the frontend. They didn’t understand. It took them a couple of days to drawn the UI in Photoshop so in Blend I should be able to build the software in about the same amount of time. Well, you and I know that it doesn’t work that way. Software is hard to write, and even harder to write well, and it takes skill and dedication. It’s not something you can do as fast as you can draw a mock up for a Surface application in Photohop. The same holds true for web applications of course. A lot of designers there fail to appreciate the hard work that goes into writing the plumbing for a good web app that can handle thousands of users. Although the UI is very important, it’s not all there is to it. And in Surface development this is the same. The UI should create the feeling of magic, but the software behind it is what makes it come alive. And that takes time. A lot of time. So brush of you skills and don’t throw them away if you start developing for Surface. Because projects (and colaborations) can fail there as hard as they can in any other area of software development. On a side note: we decided to stop the colaboration (something the other parties involved didn’t appreciate and were very angry about) and decided to hire a designer for the Surface projects. The focus is back where it belongs: on the software development we know so well and have been doing very well for 13 years. UI is just a part of the whole project and not the end product. So my company Detrio is still going strong when it comes to develivering Surface solutions but once again from a technological background, not a marketing background.

    Read the article

  • Does IntelliJ-Idea support Groovy 2.x?

    - by Freewind
    I just tried IntelliJ-Idea 11.x and 12.x (EPA), but when I use Groovy 2.0.1 or 2.0.5, the code can't be run and there are some errors out there. The Groovy plugin of idea has little information about which version of Groovy has been supported. Does idea support Groovy 2.x? I want to try the new @TypeChecked annotation of Groovy 2. UPDATE My groovy code: class X { def hello() { println("hello, groovy") } def static main(String[] args) { new X().hello() } } It uses groovy 2.0.5: And the error thrown: E:\java\jdk1.6.0_29_x64\bin\java -Didea.launcher.port=7532 "-Didea.launcher.bin.path=E:\java\IntelliJ IDEA 11.1.4\bin" -Dfile.encoding=UTF-8 -classpath "E:\java\jdk1.6.0_29_x64\jre\lib\charsets.jar;E:\java\jdk1.6.0_29_x64\jre\lib\deploy.jar;E:\java\jdk1.6.0_29_x64\jre\lib\javaws.jar;E:\java\jdk1.6.0_29_x64\jre\lib\jce.jar;E:\java\jdk1.6.0_29_x64\jre\lib\jsse.jar;E:\java\jdk1.6.0_29_x64\jre\lib\management-agent.jar;E:\java\jdk1.6.0_29_x64\jre\lib\plugin.jar;E:\java\jdk1.6.0_29_x64\jre\lib\resources.jar;E:\java\jdk1.6.0_29_x64\jre\lib\rt.jar;E:\java\jdk1.6.0_29_x64\jre\lib\ext\dcevm.jar;E:\java\jdk1.6.0_29_x64\jre\lib\ext\dnsns.jar;E:\java\jdk1.6.0_29_x64\jre\lib\ext\localedata.jar;E:\java\jdk1.6.0_29_x64\jre\lib\ext\sunjce_provider.jar;E:\WORKSPACE\TestGroovy2\out\production\TestGroovy2;E:\java\groovy-2.0.5\lib\ant-1.8.4.jar;E:\java\groovy-2.0.5\lib\ant-antlr-1.8.4.jar;E:\java\groovy-2.0.5\lib\ant-junit-1.8.4.jar;E:\java\groovy-2.0.5\lib\ant-launcher-1.8.4.jar;E:\java\groovy-2.0.5\lib\antlr-2.7.7.jar;E:\java\groovy-2.0.5\lib\asm-4.0.jar;E:\java\groovy-2.0.5\lib\asm-analysis-4.0.jar;E:\java\groovy-2.0.5\lib\asm-commons-4.0.jar;E:\java\groovy-2.0.5\lib\asm-tree-4.0.jar;E:\java\groovy-2.0.5\lib\asm-util-4.0.jar;E:\java\groovy-2.0.5\lib\bsf-2.4.0.jar;E:\java\groovy-2.0.5\lib\commons-cli-1.2.jar;E:\java\groovy-2.0.5\lib\commons-logging-1.1.1.jar;E:\java\groovy-2.0.5\lib\gpars-1.0-beta-3.jar;E:\java\groovy-2.0.5\lib\groovy-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-ant-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-bsf-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-console-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-docgenerator-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-groovydoc-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-groovysh-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-jmx-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-json-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-jsr223-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-servlet-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-sql-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-swing-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-templates-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-test-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-testng-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-xml-2.0.5.jar;E:\java\groovy-2.0.5\lib\hamcrest-core-1.1.jar;E:\java\groovy-2.0.5\lib\ivy-2.2.0.jar;E:\java\groovy-2.0.5\lib\jansi-1.6.jar;E:\java\groovy-2.0.5\lib\jcommander-1.12.jar;E:\java\groovy-2.0.5\lib\jline-1.0.jar;E:\java\groovy-2.0.5\lib\jsp-api-2.0.jar;E:\java\groovy-2.0.5\lib\jsr166y-1.7.0.jar;E:\java\groovy-2.0.5\lib\junit-4.10.jar;E:\java\groovy-2.0.5\lib\qdox-1.12.jar;E:\java\groovy-2.0.5\lib\servlet-api-2.4.jar;E:\java\groovy-2.0.5\lib\testng-6.5.2.jar;E:\java\groovy-2.0.5\lib\xmlpull-1.1.3.1.jar;E:\java\groovy-2.0.5\lib\xstream-1.4.2.jar;E:\java\IntelliJ IDEA 11.1.4\lib\idea_rt.jar" com.intellij.rt.execution.application.AppMain X Exception in thread "main" java.lang.IncompatibleClassChangeError: Found interface org.objectweb.asm.MethodVisitor, but class was expected at org.codehaus.groovy.runtime.callsite.CallSiteGenerator.genConstructor(CallSiteGenerator.java:141) at org.codehaus.groovy.runtime.callsite.CallSiteGenerator.genPogoMetaMethodSite(CallSiteGenerator.java:162) at org.codehaus.groovy.runtime.callsite.CallSiteGenerator.compilePogoMethod(CallSiteGenerator.java:215) at org.codehaus.groovy.reflection.CachedMethod.createPogoMetaMethodSite(CachedMethod.java:228) at org.codehaus.groovy.runtime.callsite.PogoMetaMethodSite.createCachedMethodSite(PogoMetaMethodSite.java:212) at org.codehaus.groovy.runtime.callsite.PogoMetaMethodSite.createPogoMetaMethodSite(PogoMetaMethodSite.java:188) at groovy.lang.MetaClassImpl.createPogoCallSite(MetaClassImpl.java:3035) at org.codehaus.groovy.runtime.callsite.CallSiteArray.createPogoSite(CallSiteArray.java:147) at org.codehaus.groovy.runtime.callsite.CallSiteArray.createCallSite(CallSiteArray.java:161) at org.codehaus.groovy.runtime.callsite.CallSiteArray.defaultCall(CallSiteArray.java:45) at org.codehaus.groovy.runtime.callsite.AbstractCallSite.call(AbstractCallSite.java:108) at org.codehaus.groovy.runtime.callsite.AbstractCallSite.call(AbstractCallSite.java:112) at X.main(sta.groovy:6) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.intellij.rt.execution.application.AppMain.main(AppMain.java:120) Process finished with exit code 1

    Read the article

  • Last week I was presented with a Microsoft MVP award in Virtual Machines – time to thank all who hel

    - by Liam Westley
    MVP in Virtual Machines Last week, on 1st April, I received an e-mail from Microsoft letting me know that I had been presented with a 2010 Microsoft® MVP Award for outstanding contributions in Virtual Machine technical communities during the past year.   It was an honour to be nominated, and is a great reflection on the vibrancy of the UK user group community which made this possible. Virtualisation for developers, not just IT Pros I consider it a special honour as my expertise in virtualisation is as a software developer utilising virtual machines to aid my software development, rather than an IT Pro who manages data centre and network infrastructure.  I’ve been on a minor mission over the past few years to enthuse developers in a topic usually seen as only for network admins, but which can make their life a whole lot easier once understood properly. Continuous learning is fun In 1676, the scientist Isaac Newton, in a letter to Robert Hooke used the phrase (http://www.phrases.org.uk/meanings/268025.html) ‘If I have seen a little further it is by standing on the shoulders of Giants’ I’m a nuclear physicist by education, so I am more than comfortable that any knowledge I have is based on the work of others.  Although far from a science, software development and IT is equally built upon the work of others. It’s one of the reasons I despise software patents. So in that sense this MVP award is a result of all the great minds that have provided virtualisation solutions for me to talk about.  I hope that I have always acknowledged those whose work I have used when blogging or giving presentations, and that I have executed my responsibility to share any knowledge gained as widely as possible. Thanks to all those who helped – a big thanks to the UK user group community I reckon this journey started in 2003 when I started attending a user group called the London .Net Users Group (http://www.dnug.org.uk) started by a nice chap called Ian Cooper. The great thing about Ian was that he always encouraged non professional speakers to take the stage at the user group, and my first ever presentation was on 30th September 2003; SQL Server CE 2.0 and the.NET Compact Framework. In 2005 Ian Cooper was on the committee for the first DeveloperDeveloperDeveloper! day, the free community conference held at Microsoft’s UK HQ in Thames Valley park in Reading.  He encouraged me to take part and so on 14th May 2005 I presented a talk previously given to the London .Net User Group on Simplifying access to multiple DB providers in .NET.  From that point on I definitely had the bug; presenting at DDD2, DDD3, groking at DDD4 and SQLBits I and after a break, DDD7, DDD Scotland and DDD8.  What definitely made me keen was the encouragement and infectious enthusiasm of some of the other DDD organisers; Craig Murphy, Barry Dorrans, Phil Winstanley and Colin Mackay. During the first few DDD events I met the Dave McMahon and Richard Costall from NxtGenUG who made it easy to start presenting at their user groups.  Along the way I’ve met a load of great user group organisers; Guy Smith-Ferrier of the .Net Developer Network, Jimmy Skowronski of GL.Net and the double act of Ray Booysen and Gavin Osborn behind what was Vista Squad and is now Edge UG. Final thanks to those who suggested virtualisation as a topic ... Final thanks have to go the people who inspired me to create my Virtualisation for Developers talk.  Toby Henderson (@holytshirt) ensured I took notice of Sun’s VirtualBox, Peter Ibbotson for being a fine sounding board at the Kew Railway over quite a few Adnam’s Broadside and to Guy Smith-Ferrier for allowing his user group to be the guinea pigs for the talk before it was seen at DDD7.  Thanks to all of you I now know much more about virtualisation than I would have thought possible and it continues to be great fun. Conclusion If this was an academy award acceptance speech I would have been cut off after the first few paragraphs, so well done if you made it this far.  I’ll be doing my best to do justice to the MVP award and the UK community.  I’m fortunate in having a new employer who considers presenting at user groups as a good thing, so don’t expect me to stop any time soon. If you’ve never seen me in action, then you can view the original DDD7 Virtualisation for Developers presentation (filmed by the Microsoft Channel 9 team) as part of the full DDD7 video list here, http://www.craigmurphy.com/blog/?p=1591.  Also thanks to Craig Murphy’s fine video work you can also view my latest DDD8 presentation on Commercial Software Development, here, http://vimeo.com/9216563 P.S. If I’ve missed anyone out, do feel free to lambast me in comments, it’s your duty.

    Read the article

  • dasBlog

    - by Daniel Moth
    Some people like blogging on a site that is completely managed by someone else (e.g. http://wordpress.com/) and others, like me, prefer hosting their own blog at their own domain. In the latter case you need to decide what blog engine to install on your web space to power your blog. There are many free blog engines to choose from (e.g. the one from http://wordpress.org/). If, like me, you want to use a blog engine that is based on the .NET platform you have many choices including BlogEngine.NET, Subtext and the one I picked: dasBlog. In this post I'll describe the steps I took to get going with the open source dasBlog (home page, source page). A. Installing First I installed dasBlog on my local Windows 7 machine where I have IIS7 installed. To install dasBlog, I started by clicking the "Install" button on its web gallery page. After that I went through configuration, theming and adding content as described below. Once I was happy that everything was working correctly on the local machine, I set this up on a hosting service. I went for a Windows IIS7 shared hosting 3 month Economy plan from GoDaddy. The dasBlog site lists a bunch of other hosts. You can read the installation instructions for dasBlog, and with GoDaddy I just had to click one button since it is available as part of their quick-install apps. With GoDaddy I had a previewdns option that allowed me to play around and preview my site before going live. B. Configuring After it was installed (on local machine and/or hosting provider), I followed the obvious steps to create an admin user and logged in. This displays an admin navigation bar with the following options: 1. Navigator Links: I decided I was not going to use this feature. I manage links on the side of my blog manually elsewhere as part of the theme. So, I deleted every entry on this page and ignored it thereafter. 2. Blogroll: Ditto - same comment as for Navigator Links. 3. Content Filters: I did not delete (or add) these, but I did ensure both checkboxes are not checked. I.e. I am not using this feature now, but I may return to it in the future. 4. Activity: This is a read-only view of various statistics. So nothing to configure here, but useful to come back to for complementary statistics to whatever other statistical package you use (e.g. free stats as part of the hosting and I also use feedburner for syndication stats). 5. Cross-posting: I did not need that, so I turned it off via the Configuration Settings discussed next. 6. Configuration Settings: This is where the bulk of the configuration for the blog takes place and they are stored in a single XML file: Site.Config file. There are truly self-explanatory options to pick for Basic Settings, Services Settings and Services to Ping, Syndication Settings (this is where you link to your feedburner name if you have one) and Mail to Weblog Settings (I keep this turned off). There are also "Xml Storage System Settings" (I keep this turned off), "OpenId Settings" (I allow OpenID commenters), "Spammer Settings" (Enable captcha, never show email addresses) and "Comment settings" (Enable comments, don't allow on older posts, don't allow html). There are also Appearance Settings (I checked the "Use Post Title for Permalink", replaced spaces with hyphen and unchecked the "Use Unique Title"). Finally, there are also Notification Settings, but they are a bit of hit and miss in my case, in that I don’t always get the emails (still investigating this). C. Adding Content You can add content via the "Add Entry" link on the admin navigation bar or by configuring the "Mail to Weblog" settings and sending email or, do what I've started doing, use Live Writer (also the team has a blog). Another way to add content is programmatically if, for example, you are migrating content from another blog (and I'll cover that in separate post sharing the code). What you should know is that all blog content (posts and comments) live in XML files in a folder called "content" under your dasBlog installation. D. Theming There is a very good guide about themes for dasBlog, there is also a similar guide with screenshots (scroll down to "So how do I create a theme") and the dasBlog macro reference. When you install dasBlog, there are many themes available; each theme is in its own folder (representing the folder name) under the themes folder. You may have noticed that you can switch between these via the "Appearance Settings" described above (look for the combobox after the Default Theme label). I created my own theme by copy-pasting an existing theme folder, renaming it and then switching to it as the default. I then opened the folder in Visual Studio and hacked around the HTML in the 3 files (itemTemplate, homeTemplate and dayTemplate). These files have a blogtemplate file extension, which I temporarily renamed to HTML as I was editing them. There is no more advice I can offer here as this is a matter of taste and the aforementioned links is all I used. Personally, I had salvaged the CSS (and structure) from my previous blog and wanted to make this one match it as closely as possible - I think I have succeeded. E. If you run into any issue with dasBlog... ...use your favorite search engine to find answers. Many bloggers have been using this engine for a while and have documented issues and workarounds over time. One such example is ScottHa's dasBlog category; another example is therightstuff where I "borrowed" the idea/macro for the outlook-style on-page navigation. If you don't find what you want through searching, try posting a question to the forums. Comments about this post welcome at the original blog.

    Read the article

  • Monitor your Hard Drive’s Health with Acronis Drive Monitor

    - by Matthew Guay
    Are you worried that your computer’s hard drive could die without any warning?  Here’s how you can keep tabs on it and get the first warning signs of potential problems before you actually lose your critical data. Hard drive failures are one of the most common ways people lose important data from their computers.  As more of our memories and important documents are stored digitally, a hard drive failure can mean the loss of years of work.  Acronis Drive Monitor helps you avert these disasters by warning you at the first signs your hard drive may be having trouble.  It monitors many indicators, including heat, read/write errors, total lifespan, and more. It then notifies you via a taskbar popup or email that problems have been detected.  This early warning lets you know ahead of time that you may need to purchase a new hard drive and migrate your data before it’s too late. Getting Started Head over to the Acronis site to download Drive Monitor (link below).  You’ll need to enter your name and email, and then you can download this free tool. Also, note that the download page may ask if you want to include a trial of their for-pay backup program.  If you wish to simply install the Drive Monitor utility, click Continue without adding. Run the installer when the download is finished.  Follow the prompts and install as normal. Once it’s installed, you can quickly get an overview of your hard drives’ health.  Note that it shows 3 categories: Disk problems, Acronis backup, and Critical Events.  On our computer, we had Seagate DiskWizard, an image backup utility based on Acronis Backup, installed, and Acronis detected it. Drive Monitor stays running in your tray even when the application window is closed.  It will keep monitoring your hard drives, and will alert you if there’s a problem. Find Detailed Information About Your Hard Drives Acronis’ simple interface lets you quickly see an overview of how the drives on your computer are performing.  If you’d like more information, click the link under the description.  Here we see that one of our drives have overheated, so click Show disks to get more information. Now you can select each of your drives and see more information about them.  From the Disk overview tab that opens by default, we see that our drive is being monitored, has been running for a total of 368 days, and that it’s health is good.  However, it is running at 113F, which is over the recommended max of 107F.   The S.M.A.R.T. parameters tab gives us more detailed information about our drive.  Most users wouldn’t know what an accepted value would be, so it also shows the status.  If the value is within the accepted parameters, it will report OK; otherwise, it will show that has a problem in this area. One very interesting piece of information we can see is the total number of Power-On Hours, Start/Stop Count, and Power Cycle Count.  These could be useful indicators to check if you’re considering purchasing a second hand computer.  Simply load this program, and you’ll get a better view of how long it’s been in use. Finally, the Events tab shows each time the program gave a warning.  We can see that our drive, which had been acting flaky already, is routinely overheating even when our other hard drive was running in normal temperature ranges. Monitor Acronis Backups And Critical Errors In addition to monitoring critical stats of your hard drives, Acronis Drive Monitor also keeps up with the status of your backup software and critical events reported by Windows.  You can access these from the front page, or via the links on the left hand sidebar.  If you have any edition of any Acronis Backup product installed, it will show that it was detected.  Note that it can only monitor the backup status of the newest versions of Acronis Backup and True Image. If no Acronis backup software was installed, it will show a warning that the drive may be unprotected and will give you a link to download Acronis backup software.   If you have another backup utility installed that you wish to monitor yourself, click Configure backup monitoring, and then disable monitoring on the drives you’re monitoring yourself. Finally, you can view any detected Critical events from the Critical events tab on the left. Get Emailed When There’s a Problem One of Drive Monitor’s best features is the ability to send you an email whenever there’s a problem.  Since this program can run on any version of Windows, including the Server and Home Server editions, you can use this feature to stay on top of your hard drives’ health even when you’re not nearby.  To set this up, click Options in the top left corner. Select Alerts on the left, and then click the Change settings link to setup your email account. Enter the email address which you wish to receive alerts, and a name for the program.  Then, enter the outgoing mail server settings for your email.  If you have a Gmail account, enter the following information: Outgoing mail server (SMTP): smtp.gmail.com Port: 587 Username and Password: Your gmail address and password Check the Use encryption box, and then select TLS from the encryption options.   It will now send a test message to your email account, so check and make sure it sent ok. Now you can choose to have the program automatically email you when warnings and critical alerts appear, and also to have it send regular disk status reports.   Conclusion Whether you’ve got a brand new hard drive or one that’s seen better days, knowing the real health of your it is one of the best ways to be prepared before disaster strikes.  It’s no substitute for regular backups, but can help you avert problems.  Acronis Drive Monitor is a nice tool for this, and although we wish it wasn’t so centered around their backup offerings, we still found it a nice tool. Link Download Acronis Drive Monitor (registration required) Similar Articles Productive Geek Tips Quick Tip: Change Monitor Timeout From Command LineAnalyze and Manage Hard Drive Space with WinDirStatMonitor CPU, Memory, and Disk IO In Windows 7 with Taskbar MetersDefrag Multiple Hard Drives At Once In WindowsFind Your Missing USB Drive on Windows XP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Windows 7’s WordPad is Actually Good Greate Image Viewing and Management with Zoner Photo Studio Free Windows Media Player Plus! – Cool WMP Enhancer Get Your Team’s World Cup Schedule In Google Calendar Backup Drivers With Driver Magician TubeSort: YouTube Playlist Organizer

    Read the article

  • Validating a linked item&rsquo;s data template in Sitecore

    - by Kyle Burns
    I’ve been doing quite a bit of work in Sitecore recently and last week I encountered a situation that it appears many others have hit.  I was working with a field that had been configured originally as a grouped droplink, but now needed to be updated to support additional levels of hierarchy in the folder structure.  If you’ve done any work in Sitecore that statement makes sense, but if not it may seem a bit cryptic.  Sitecore offers a number of different field types and a subset of these field types focus on providing links either to other items on the content tree or to content that is not stored in Sitecore.  In the case of the grouped droplink, the field is configured with a “root” folder and each direct descendant of this folder is considered to be a header for a grouping of other items and displayed in a dropdown.  A picture is worth a thousand words, so consider the following piece of a content tree: If I configure a grouped droplink field to use the “Current” folder as its datasource, the control that gets to my content author looks like this: This presents a nicely organized display and limits the user to selecting only the direct grandchildren of the folder root.  It also presents the limitation that struck as we were thinking through the content architecture and how it would hold up over time – the authors cannot further organize content under the root folder because of the structure required for the dropdown to work.  Over time, not allowing the hierarchy to go any deeper would prevent out authors from being able to organize their content in a way that it would be found when needed, so the grouped droplink data type was not going to fit the bill. I needed to look for an alternative data type that allowed for selection of a single item and limited my choices to descendants of a specific node on the content tree.  After looking at the options available for links in Sitecore and considering them against each other, one option stood out as nearly perfect – the droptree.  This field type stores its data identically to the droplink and allows for the selection of zero or one items under a specific node in the content tree.  By changing my data template to use droptree instead of grouped droplink, the author is now presented with the following when selecting a linked item: Sounds great, but a did say almost perfect – there’s still one flaw.  The code intended to display the linked item is expecting the selection to use a specific data template (or more precisely it makes certain assumptions about the fields that will be present), but the droptree does nothing to prevent the author from selecting a folder (since folders are items too) instead of one of the items contained within a folder.  I looked to see if anyone had already solved this problem.  I found many people discussing the problem, but the closest that I found to a solution was the statement “the best thing would probably be to create a custom validator” with no further discussion in regards to what this validator might look like.  I needed to create my own validator to ensure that the user had not selected a folder.  Since so many people had the same issue, I decided to make the validator as reusable as possible and share it here. The validator that I created inherits from StandardValidator.  In order to make the validator more intuitive to developers that are familiar with the TreeList controls in Sitecore, I chose to implement the following parameters: ExcludeTemplatesForSelection – serves as a “deny list”.  If the data template of the selected item is in this list it will not validate IncludeTemplatesForSelection – this can either be empty to indicate that any template not contained in the exclusion list is acceptable or it can contain the list of acceptable templates Now that I’ve explained the parameters and the purpose of the validator, I’ll let the code do the rest of the talking: 1: /// <summary> 2: /// Validates that a link field value meets template requirements 3: /// specified using the following parameters: 4: /// - ExcludeTemplatesForSelection: If present, the item being 5: /// based on an excluded template will cause validation to fail. 6: /// - IncludeTemplatesForSelection: If present, the item not being 7: /// based on an included template will cause validation to fail 8: /// 9: /// ExcludeTemplatesForSelection trumps IncludeTemplatesForSelection 10: /// if the same value appears in both lists. Lists are comma seperated 11: /// </summary> 12: [Serializable] 13: public class LinkItemTemplateValidator : StandardValidator 14: { 15: public LinkItemTemplateValidator() 16: { 17: } 18:   19: /// <summary> 20: /// Serialization constructor is required by the runtime 21: /// </summary> 22: /// <param name="info"></param> 23: /// <param name="context"></param> 24: public LinkItemTemplateValidator(SerializationInfo info, StreamingContext context) : base(info, context) { } 25:   26: /// <summary> 27: /// Returns whether the linked item meets the template 28: /// constraints specified in the parameters 29: /// </summary> 30: /// <returns> 31: /// The result of the evaluation. 32: /// </returns> 33: protected override ValidatorResult Evaluate() 34: { 35: if (string.IsNullOrWhiteSpace(ControlValidationValue)) 36: { 37: return ValidatorResult.Valid; // let "required" validation handle 38: } 39:   40: var excludeString = Parameters["ExcludeTemplatesForSelection"]; 41: var includeString = Parameters["IncludeTemplatesForSelection"]; 42: if (string.IsNullOrWhiteSpace(excludeString) && string.IsNullOrWhiteSpace(includeString)) 43: { 44: return ValidatorResult.Valid; // "allow anything" if no params 45: } 46:   47: Guid linkedItemGuid; 48: if (!Guid.TryParse(ControlValidationValue, out linkedItemGuid)) 49: { 50: return ValidatorResult.Valid; // probably put validator on wrong field 51: } 52:   53: var item = GetItem(); 54: var linkedItem = item.Database.GetItem(new ID(linkedItemGuid)); 55:   56: if (linkedItem == null) 57: { 58: return ValidatorResult.Valid; // this validator isn't for broken links 59: } 60:   61: var exclusionList = (excludeString ?? string.Empty).Split(','); 62: var inclusionList = (includeString ?? string.Empty).Split(','); 63:   64: if ((inclusionList.Length == 0 || inclusionList.Contains(linkedItem.TemplateName)) 65: && !exclusionList.Contains(linkedItem.TemplateName)) 66: { 67: return ValidatorResult.Valid; 68: } 69:   70: Text = GetText("The field \"{0}\" specifies an item which is based on template \"{1}\". This template is not valid for selection", GetFieldDisplayName(), linkedItem.TemplateName); 71:   72: return GetFailedResult(ValidatorResult.FatalError); 73: } 74:   75: protected override ValidatorResult GetMaxValidatorResult() 76: { 77: return ValidatorResult.FatalError; 78: } 79:   80: public override string Name 81: { 82: get { return @"LinkItemTemplateValidator"; } 83: } 84: }   In this blog entry, I have shared some code that I found useful in solving a problem that seemed fairly common.  Hopefully the next person that is looking for this answer finds it useful as well.

    Read the article

  • LLBLGen Pro feature highlights: automatic element name construction

    - by FransBouma
    (This post is part of a series of posts about features of the LLBLGen Pro system) One of the things one might take for granted but which has a huge impact on the time spent in an entity modeling environment is the way the system creates names for elements out of the information provided, in short: automatic element name construction. Element names are created in both directions of modeling: database first and model first and the more names the system can create for you without you having to rename them, the better. LLBLGen Pro has a rich, fine grained system for creating element names out of the meta-data available, which I'll describe more in detail below. First the model element related element naming features are highlighted, in the section Automatic model element naming features and after that I'll go more into detail about the relational model element naming features LLBLGen Pro has to offer in the section Automatic relational model element naming features. Automatic model element naming features When working database first, the element names in the model, e.g. entity names, entity field names and so on, are in general determined from the relational model element (e.g. table, table field) they're mapped on, as the model elements are reverse engineered from these relational model elements. It doesn't take rocket science to automatically name an entity Customer if the entity was created after reverse engineering a table named Customer. It gets a little trickier when the entity which was created by reverse engineering a table called TBL_ORDER_LINES has to be named 'OrderLine' automatically. Automatic model element naming also takes into effect with model first development, where some settings are used to provide you with a default name, e.g. in the case of navigator name creation when you create a new relationship. The features below are available to you in the Project Settings. Open Project Settings on a loaded project and navigate to Conventions -> Element Name Construction. Strippers! The above example 'TBL_ORDER_LINES' shows that some parts of the table name might not be needed for name creation, in this case the 'TBL_' prefix. Some 'brilliant' DBAs even add suffixes to table names, fragments you might not want to appear in the entity names. LLBLGen Pro offers you to define both prefix and suffix fragments to strip off of table, view, stored procedure, parameter, table field and view field names. In the example above, the fragment 'TBL_' is a good candidate for such a strip pattern. You can specify more than one pattern for e.g. the table prefix strip pattern, so even a really messy schema can still be used to produce clean names. Underscores Be Gone Another thing you might get rid of are underscores. After all, most naming schemes for entities and their classes use PasCal casing rules and don't allow for underscores to appear. LLBLGen Pro can automatically strip out underscores for you. It's an optional feature, so if you like the underscores, you're not forced to see them go: LLBLGen Pro will leave them alone when ordered to to so. PasCal everywhere... or not, your call LLBLGen Pro can automatically PasCal case names on word breaks. It determines word breaks in a couple of ways: a space marks a word break, an underscore marks a word break and a case difference marks a word break. It will remove spaces in all cases, and based on the underscore removal setting, keep or remove the underscores, and upper-case the first character of a word break fragment, and lower case the rest. Say, we keep the defaults, which is remove underscores and PasCal case always and strip the TBL_ fragment, we get with our example TBL_ORDER_LINES, after stripping TBL_ from the table name two word fragments: ORDER and LINES. The underscores are removed, the first character of each fragment is upper-cased, the rest lower-cased, so this results in OrderLines. Almost there! Pluralization and Singularization In general entity names are singular, like Customer or OrderLine so LLBLGen Pro offers a way to singularize the names. This will convert OrderLines, the result we got after the PasCal casing functionality, into OrderLine, exactly what we're after. Show me the patterns! There are other situations in which you want more flexibility. Say, you have an entity Customer and an entity Order and there's a foreign key constraint defined from the target of Order and the target of Customer. This foreign key constraint results in a 1:n relationship between the entities Customer and Order. A relationship has navigators mapped onto the relationship in both entities the relationship is between. For this particular relationship we'd like to have Customer as navigator in Order and Orders as navigator in Customer, so the relationship becomes Customer.Orders 1:n Order.Customer. To control the naming of these navigators for the various relationship types, LLBLGen Pro defines a set of patterns which allow you, using macros, to define how the auto-created navigator names will look like. For example, if you rather have Customer.OrderCollection, you can do so, by changing the pattern from {$EndEntityName$P} to {$EndEntityName}Collection. The $P directive makes sure the name is pluralized, which is not what you want if you're going for <EntityName>Collection, hence it's removed. When working model first, it's a given you'll create foreign key fields along the way when you define relationships. For example, you've defined two entities: Customer and Order, and they have their fields setup properly. Now you want to define a relationship between them. This will automatically create a foreign key field in the Order entity, which reflects the value of the PK field in Customer. (No worries if you hate the foreign key fields in your classes, on NHibernate and EF these can be hidden in the generated code if you want to). A specific pattern is available for you to direct LLBLGen Pro how to name this foreign key field. For example, if all your entities have Id as PK field, you might want to have a different name than Id as foreign key field. In our Customer - Order example, you might want to have CustomerId instead as foreign key name in Order. The pattern for foreign key fields gives you that freedom. Abbreviations... make sense of OrdNr and friends I already described word breaks in the PasCal casing paragraph, how they're used for the PasCal casing in the constructed name. Word breaks are used for another neat feature LLBLGen Pro has to offer: abbreviation support. Burt, your friendly DBA in the dungeons below the office has a hate-hate relationship with his keyboard: he can't stand it: typing is something he avoids like the plague. This has resulted in tables and fields which have names which are very short, but also very unreadable. Example: our TBL_ORDER_LINES example has a lovely field called ORD_NR. What you would like to see in your fancy new OrderLine entity mapped onto this table is a field called OrderNumber, not a field called OrdNr. What you also like is to not have to rename that field manually. There are better things to do with your time, after all. LLBLGen Pro has you covered. All it takes is to define some abbreviation - full word pairs and during reverse engineering model elements from tables/views, LLBLGen Pro will take care of the rest. For the ORD_NR field, you need two values: ORD as abbreviation and Order as full word, and NR as abbreviation and Number as full word. LLBLGen Pro will now convert every word fragment found with the word breaks which matches an abbreviation to the given full word. They're case sensitive and can be found in the Project Settings: Navigate to Conventions -> Element Name Construction -> Abbreviations. Automatic relational model element naming features Not everyone works database first: it may very well be the case you start from scratch, or have to add additional tables to an existing database. For these situations, it's key you have the flexibility that you can control the created table names and table fields without any work: let the designer create these names based on the entity model you defined and a set of rules. LLBLGen Pro offers several features in this area, which are described in more detail below. These features are found in Project Settings: navigate to Conventions -> Model First Development. Underscores, welcome back! Not every database is case insensitive, and not every organization requires PasCal cased table/field names, some demand all lower or all uppercase names with underscores at word breaks. Say you create an entity model with an entity called OrderLine. You work with Oracle and your organization requires underscores at word breaks: a table created from OrderLine should be called ORDER_LINE. LLBLGen Pro allows you to do that: with a simple checkbox you can order LLBLGen Pro to insert an underscore at each word break for the type of database you're working with: case sensitive or case insensitive. Checking the checkbox Insert underscore at word break case insensitive dbs will let LLBLGen Pro create a table from the entity called Order_Line. Half-way there, as there are still lower case characters there and you need all caps. No worries, see below Casing directives so everyone can sleep well at night For case sensitive databases and case insensitive databases there is one setting for each of them which controls the casing of the name created from a model element (e.g. a table created from an entity definition using the auto-mapping feature). The settings can have the following values: AsProjectElement, AllUpperCase or AllLowerCase. AsProjectElement is the default, and it keeps the casing as-is. In our example, we need to get all upper case characters, so we select AllUpperCase for the setting for case sensitive databases. This will produce the name ORDER_LINE. Sequence naming after a pattern Some databases support sequences, and using model-first development it's key to have sequences, when needed, to be created automatically and if possible using a name which shows where they're used. Say you have an entity Order and you want to have the PK values be created by the database using a sequence. The database you're using supports sequences (e.g. Oracle) and as you want all numeric PK fields to be sequenced, you have enabled this by the setting Auto assign sequences to integer pks. When you're using LLBLGen Pro's auto-map feature, to create new tables and constraints from the model, it will create a new table, ORDER, based on your settings I previously discussed above, with a PK field ID and it also creates a sequence, SEQ_ORDER, which is auto-assigns to the ID field mapping. The name of the sequence is created by using a pattern, defined in the Model First Development setting Sequence pattern, which uses plain text and macros like with the other patterns previously discussed. Grouping and schemas When you start from scratch, and you're working model first, the tables created by LLBLGen Pro will be in a catalog and / or schema created by LLBLGen Pro as well. If you use LLBLGen Pro's grouping feature, which allows you to group entities and other model elements into groups in the project (described in a future blog post), you might want to have that group name reflected in the schema name the targets of the model elements are in. Say you have a model with a group CRM and a group HRM, both with entities unique for these groups, e.g. Employee in HRM, Customer in CRM. When auto-mapping this model to create tables, you might want to have the table created for Employee in the HRM schema but the table created for Customer in the CRM schema. LLBLGen Pro will do just that when you check the setting Set schema name after group name to true (default). This gives you total control over where what is placed in the database from your model. But I want plural table names... and TBL_ prefixes! For now we follow best practices which suggest singular table names and no prefixes/suffixes for names. Of course that won't keep everyone happy, so we're looking into making it possible to have that in a future version. Conclusion LLBLGen Pro offers a variety of options to let the modeling system do as much work for you as possible. Hopefully you enjoyed this little highlight post and that it has given you new insights in the smaller features available to you in LLBLGen Pro, ones you might not have thought off in the first place. Enjoy!

    Read the article

  • Test-Drive ASP.NET MVC Review

    - by Ben Griswold
    A few years back I started dallying with test-driven development, but I never fully committed to the practice. This wasn’t because I didn’t believe in the value of TDD; it was more a matter of not completely understanding how to incorporate “test first” into my everyday development. Back in my web forms days, I could point fingers at the framework for my ignorance and laziness. After all, web forms weren’t exactly designed for testability so who could blame me for not embracing TDD in those conditions, right? But when I switched to ASP.NET MVC and quickly found myself fresh out of excuses and it became instantly clear that it was time to get my head around red-green-refactor once and for all or I would regretfully miss out on one of the biggest selling points the new framework had to offer. I have previously written about how I learned ASP.NET MVC. It was primarily hands on learning but I did read a couple of ASP.NET MVC books along the way. The books I read dedicated a chapter or two to TDD and they certainly addressed the benefits of TDD and how MVC was designed with testability in mind, but TDD was merely an afterthought compared to, well, teaching one how to code the model, view and controller. This approach made some sense, and I learned a bunch about MVC from those books, but when it came to TDD the books were just a teaser and an opportunity missed.  But then I got lucky – Jonathan McCracken contacted me and asked if I’d review his book, Test-Drive ASP.NET MVC, and it was just what I needed to get over the TDD hump. As the title suggests, Test-Drive ASP.NET MVC takes a different approach to learning MVC as it focuses on testing right from the very start. McCracken wastes no time and swiftly familiarizes us with the framework by building out a trivial Quote-O-Matic application and then dedicates the better part of his book to testing first – first by explaining TDD and then coding a full-featured Getting Organized application inspired by David Allen’s popular book, Getting Things Done. If you are a learn-by-example kind of coder (like me), you will instantly appreciate and enjoy McCracken’s style – its fast-moving, pragmatic and focused on only the most relevant information required to get you going with ASP.NET MVC and TDD. The book continues with the test-first theme but McCracken moves away from the sample application and incorporates other practical skills like persisting models with NHibernate, leveraging Inversion of Control with the IControllerFactory and building a RESTful web service. What I most appreciated about this section was McCracken’s use of and praise for open source libraries like Rhino Mocks, SQLite and StructureMap (to name just a few) and productivity tools like ReSharper, Web Platform Installer and ASP.NET SQL Server Setup Wizard.  McCracken’s emphasis on real world, pragmatic development was clearly demonstrated in every tool choice, straight-forward code block and developer tip. Whether one is already familiar with the tools/tips or not, McCracken’s thought process is easily understood and appreciated. The final section of the book walks the reader through security and deployment – everything from error handling and logging with ELMAH, to ASP.NET Health Monitoring, to using MSBuild with automated builds, to the deployment  of ASP.NET MVC to various web environments. These chapters, like those prior, offer enough information and explanation to simply help you get the job done.  Do I believe Test-Drive ASP.NET MVC will turn you into an expert MVC developer overnight?  Well, no.  I don’t think any book can make that claim.  If that were possible, I think book list prices would skyrocket!  That said, Test-Drive ASP.NET MVC provides a solid foundation and a unique (and dare I say necessary) approach to learning ASP.NET MVC.  Along the way McCracken shares loads of very practical software development tips and references numerous tools and libraries. The bottom line is it’s a great ASP.NET MVC primer – if you’re new to ASP.NET MVC it’s just what you need to get started.  Do I believe Test-Drive ASP.NET MVC will give you everything you need to start employing TDD in your everyday development?  Well, I used to think that learning TDD required a lot of practice and, if you’re lucky enough, the guidance of a mentor or coach.  I used to think that one couldn’t learn TDD from a book alone. Well, I’m still no pro, but I’m testing first now and Jonathan McCracken and his book, Test-Drive ASP.NET MVC, played a big part in making this happen.  If you are an MVC developer and a TDD newb, Test-Drive ASP.NET MVC is just the book for you.

    Read the article

  • How to create a new Team Project Collection in TFS2010:

    - by jehan
    TFS 2010 has introduced the notion of Team Project Collection (TPC).  I have already discussed about TPC in my earlier post, you can check it out here. In this post, I will demonstrate how to create a new Team Project Collection in TFS2010. First, you have to open the TFS Administration Console (Start à All Programs à Microsoft Team Foundation Server 2010 à Team Foundation Server Administration Console), expand the Application Tier node in TFS Administration Console and click on Team Project Collection. Here you will see the TPC’s which are already exist, I am having only one TPC named New Collection and I’m going to create a new TPC called Demo Collection. To create a new Team Project Collection, you need to click on Create Collection; it will open the Create New Team Project Collection window.     Under the Name tab, you have to enter the name of Collection which you want to give for your new TPC (I naming it as Demo Collection). You can also provide some description about your TPC in Description tab which is optional and click next. Here, you need to enter the name of SQL Server Instance where you want your new TPC data to reside. You have the option either to choose the creating a Database for this TPC or use the already existing empty database and then click next.   In next screen, you have to choose SharePoint configuration. Here you have the options to either configure SharePoint Site for TPC at default collections or you can specify the your existing SharePoint site and  you can also choose not  to configure the SharePoint for this collection, if you choose last option then you cannot configure the Share Point sites for the all the Team Projects under this Project Collection. You also have the flexibility to create a Share Point site for this TPC later on, then if you need you have to configure SharePoint site for the existing team projects manually.   In next screen, you will have the Reports configuration. Here you have the options to either configure the Reports for TPC at default path or you can specify the path for at existing Reports folder, you can also choose not to configure the Reports for this collection, if you choose last option then you cannot create  the Reports  for the all the Team Projects under this Project Collection. Here also you can enable reporting for this TPC later on. The next screen is related to Lab Management Configuration, Lab Management is the new feature in TFS2010 which enables the users to create and manage virtual test environments where you can deploy and test your application. There are no options available here as I don’t have the Lab Management configured for my Team Foundation Server. The next screen is Review Configuration window, which will show up all the configuration settings you have specified, so that you can review the configurations before creating the Team Project Collection. If you want to make any changes to the configurations then you can go back to the previous windows and can make the changes. After Reviewing the configuration settings, you can click on verify button. Which will verify that if you’re Team Project Collection is ready to be created or not, it will show up the errors and warning (if any) which can make your Team Project Collection fail. You can then choose to create the Team Project Collection if the verify option doesn’t throw any warnings and errors. If the verify option throws any errors, then it is strongly suggested that you have to first rectify the issues then only go for TPC creation especially in case of warnings as it is a common practice to overlook the warnings.   If you choose the create TPC option, then it will start the process of creating a Team Project Collection  and once its completed you can check the status of configuration different components  during Team Project Collection. You can see in below screen that all the components are configured successfully.   In next screen, you can find the location of log file created for this Team Project Creation, this log file is really important in case of Team Project creation failure because it will help you to find  the root cause for the failure. Now, you can see that the New Team Projection (Demo Collection) which was created is now available in Team Foundation Collection tab and its status is Online.   You can now try to connect to this Team Project Collection from Team Explorer. Choose the newly created Team Project Collection and click on connect.     This Team Project Collection is empty because no Team Projects are created yet. Now, you can create the new Team Projects and start working.

    Read the article

  • Upgrading Fusion Middleware 11.1.1.x to 11.1.1.4

    - by James Taylor
    This is a follow on from my previous post where we upgraded 11.1.1.2 to 11.1.1.3. The instructions I provide here will work for Fusion Middleware 11.1.1.2 and 11.1.1.3 wanting to upgrade to 11.1.1.4. In this example I’m just upgrading SOA Suite on OEL 64bit but the steps will be the same, some of the downloads may be different based on your environment. To upgrade to 11.1.1.4 you need to have access to http://support.oracle.com as this is where the downloads reside. Oracle provides 11.1.1.4 as a standalone download so you can do a fresh install if required using OTN downloads (http://www.oracle.com/technetwork/indexes/downloads/index.html). The high level steps to upgrade are as follows: Download software Shutdown you SOA Environment Upgrade WLS to 11.1.1.4 Upgrade SOA Suite to 11.1.1.4 Upgrade OSB to 11.1.1.4 Upgrade MSD Schemas Identify the downloads you require for your install. You will need the WebLogic Server Upgrade and the additional product downloads. If you are using 64bit then use the generic version. The downloads are found from the following location - http://download.oracle.com/docs/html/E18749_01/download_readme.htm#BABDDIIC For the purpose of this post I downloaded the following patches 11060985 – WLS Server Generic 11060960 – SOA Suite 11061005 – OSB Suite You must also download the 11.1.1.4 RCU tool to upgrade the DB schemas. It is available via OTN, or, Oracle Support, I have provided the link from Oracle Support.  11060956 – RCU Make sure you have set the Java executable in your PATH e.g. export PATH=$JAVA_HOME/bin:$PATH  Make sure all your WebLogic environment has been shut down before performing the upgrade. Extract the WLS patch 11060985 to a temporary directory and start the installer java –jar wls1034_upgrade_generic.jar Please note if you are not running 64BIT then the upgrade executable will be just a bin file which you can execute directly. Chose the right Oracle home for your WebLogic Server install. In the Register for Security Updates you can enter your details or just click Next. If you do not enter details confirm that you don’t want to receive these updates Select the products you want to upgrade and select next. It is recommended that you accept the defaults. Confirm the directories that will be upgraded Upgrade of WLS ahs been completed   Extract your both SOA downloads to a temporary directory and run the installer found in Disk1 ./runInstaller -jreLoc /java/jdk1.6.0_20/jre Please note that the java location and version may be different for your environment Skip the Software Updates Ensure your system meets the prerequisites Set the Oracle home for your SOA install. You will be asked to confirm that you want to upgrade, click Yes Choose your application server. Since you are upgrading from 11.1.1.x you will be on WebLogic Start the Install Installation Upgrade of SOA Suite completed accept the default to finish.   In my environment I have OSB installed so I need to upgrade this next. If you don’t have SOA Suite you can go straight to completing the DB Schema updates at Step 24.  Extract the OSB upgrade files to a temporary directory and execute the installer found in the Disk1 folder. ./runInstaller -jreLoc /java/jdk1.6.0_20/jre Skip the software updates Select the Oracle home for your environment Accept the warning to continue the upgrade Point to the location of your WebLogic Server installation Install the OSB upgrade Upgrade has been completed accept the defaults Change directory to $MW_HOME/oracle_common/bin where the Patch Set Assistant is installed Execute the following command to update the MDS schema. Please not for my examples I have the context set to DEV. your may be different. This means that all my schemas are prefixed by DEV. ./psa -dbType Oracle -dbConnectString 'localhost:1521:xe' -dbaUserName sys -schemaUserName DEV_MDS You will be asked you passwords for sys and the schema Enter the database administrator password for "sys": Enter the schema password for schema user "DEV_MDS": Change directory to $MW_HOME/Oracle_SOA1/bin to where the Patch Set Assistant is installed for SOA Suite. Execute the following command to update the SOA and BAM schemas ./psa -dbType Oracle -dbConnectString 'localhost:1521:xe' -dbaUserName sys -schemaUserName DEV_SOAINFRA   To check that you have the installed correctly run the following SQL as sysdba. SELECT owner, version, status FROM schema_version_registry; OWNER                          VERSION                        STATUS ------------------------------ ------------------------------ ----------- DEV_MDS                        11.1.1.4.0                     VALID DEV_SOAINFRA                   11.1.1.4.0                     VALID Don’t stress if the versions are not all sitting at version 11.1.1.4 as not all schemas need to be updated. The key ones are MDS and SOAINFRA

    Read the article

  • Oracle Day 2013 Istanbul – 14.Kasim.2013

    - by TUFEKCIOGLU,FATIH
    Oracle Day 2013 Istanbul – 14.Kasim.2013 Yeni Teknolojiler. Yeni Dünya.  Sayfa duzgun goruntulenemiyorsa etkinlik takvimine asagidaki linkten ulasabilirsiniz : https://blogs.oracle.com/fatihtufekcioglu/resource/Oracle_Day_Istanbul_14.Kasim.2013_blogs.oracle.com.fatihtufekcioglu.html#! charset=iso-8859-1"> "> Hemen Kaydolun! Oracle Day 2013 Istanbul Istanbul Kongre Merkezi Taskisla Caddesi Harbiye 34367 Istanbul / Türkiye 14 Kasim 2013, Persembe 08:30 - 18:00 LCV: [email protected] Oracle Day 2013 Istanbul Yeni Teknolojiler. Yeni Dünya. 14 Kasim 2013 Sayin Davetlimiz, Teknoloji, dünyayi sürekli degistirmeye devam ediyor. Bulut bilisim, mobil çözümler, büyük veri ve nesnelerin interneti güçlerini birlestirerek, eski is modellerini altüst edip inovasyonu ön plana çikartiyorlar. Organizasyonlar ise bu yeni dünyaya ayak uydurmak için bir yandan sürekli degisimi saglamaya çalisirken, diger yandan da isletmelerini en iyi sekilde yönetmeye devam etmek zorundalar. Peki organizasyonlar bu dengeyi nasil koruyorlar? Oracle Day 2013 Istanbul'da birçok Oracle müsterisinden dinleyeceginiz basari hikayeleriyle bunun nasil mümkün oldugunu görebilirsiniz. Etkinlige katilarak: Teknolojinin, yeni is modellerini ve firsatlarini nasil atesledigini ögrenebilir, Inovasyonu ön plana çikartmak için bilgi teknolojilerini sadelestiren sirketlerin basari hikayelerini dinleyebilir, Sizinle ayni zorluklari tecrübe eden sektör profesyonelleriyle biraraya gelebilir, Oracle'dan en yeni ürün haberlerini ve duyurularini takip etme firsati bulabilirsiniz. Oracle ve is ortaklariyla bulusmak, müsteri basari hikayelerini dinlemek, sosyal ve mobil etkilesimler için firsatlar yakalamak, uygulamali demolar izlemek ve daha fazlasi için Oracle Day 2013 Istanbul'da bize katilmanizdan memnuniyet duyacagiz. Hemen Kaydolun. Saygilarimizla, Oracle Türkiye Oracle Is Ortagi Müsteri Basari Hikayesi TROUG Sunum Ingilizcedir Program 08:30-09:30 Kayit 09:30-10:00 Hos Geldiniz Filiz Dogan, Genel Müdür, Oracle Türkiye 10:00-10:30 Keynote Andrew Sutherland, SVP, EMEA Technology, Oracle 10:30-11:00 Yapi Kredi ve Oracle Cahit Erdogan, Bilisim Teknolojileri ve Operasyon Yönetimi Genel Müdür Yardimcisi, Yapi Kredi Bankasi 11:00-11:30 150. Yasinda Ziraat'te Teknolojinin Dünü, Bugünü, Yarini Yunus Uygur Kocaoglu, Ziraat Teknoloji Genel Müdürü & Bilgi Teknolojileri Yönetimi Genel Müdür Yardimcisi, Ziraat Bankasi 11:30-11:45 Oracle Day'de 5. Yil Sezgin Aslan, Is Gelistirme Grup Yöneticisi, Innova 11:45-13:00 Ögle Yemegi Salon 1 Salon 2 Salon 3 Salon 4 Salon 5 Salon 6 Salon 7 Salon 8 Bulut Bilisim Çözümleri Büyük Veri & Analitik Çözümler Mobil Dünyada Orta Katman Çözümleri Is Uygulamalari I Is Uygulamalari II Modern Veri Merkezi Oracle & Is Ortaklari Çözümleri & Basari Hikayeleri TROUG (Oracle User Group) 13:00-13:30 Bulutunuza Yön Verin! Big Data at Work: Transform Your Business with Analytics Your Blueprint For Driving Enterprise Mobile Strategy Empowering Modern Business in the Cloud - Is Optimizasyonu Hayal Degil! Degisime Dünden Hazir Olmak: "BAT E-Fatura Projesi” Panel: "Türkiye'de Nitelikli Bilisim Elemani Yetistirilmesi" Oracle Oracle Oracle Oracle Oracle Idea Teknoloji British American Tobacco Oracle TROUG 13:30-13:40 Kahve Molasi 13:40-14:10 12c ile Veritabani Buluta Tasindi, Peki ya Siz? Büyüklük Sizde Kalsin BT Öncüleri için Uygulama Sunucusu Platformu Vakif Emeklilik Muhasebe ve Lojistik Sistemler Dönüsüm Projesi JD Edwards EnterpriseOne: Kapsamli, Kullanici Dostu ve Yenilikçi Modern Veri Merkezleri için Etkin Oracle Sunuculari Ziraat Bankasi Exadata Basari Hikayesi Oracle Database 12c Önemli Özellikler (DB/DWH) Oracle Etiya Oracle Innova Oracle Oracle Ziraat Bankasi TROUG 14:10-14:20 Kahve Molasi 14:20-14:50 Oracle Bulutunuza Bir Mimarin Bakisi Odakliligin Gücü: Oracle BI Dashboard Kullanimiyla Performans Yönetimi Kurumsal Uygulamalarin Mobil Dünyaya Entegrasyonu Müsteri Karsisinda Tutarli, Etkin ve Tekil Durus: Mükemmel Müsteri Deneyimi Etkin Planlama ve Satin Alma ile Tedarik Zincirinden "Deger Zinciri"ne Dönüsüm Oracle Uygulamalari için Tasarlanmis Veri Depolama Sistemleri Bütünlesik Sistemler (Engineered Systems) için Platinum Hizmetler Sql/PLSQL Yeni Özellikler Oracle ING Oracle Oracle Oracle Oracle Oracle TROUG 14:50-15:00 Kahve Molasi 15:00-15:30 Oracle Enterprise Manager 12c: How Does It Support the Cloud? Veri Analizinde Yeni Yorum, Endeca ile Yeni Bakis Kurumsal Bilginin Yolculugu Basariya Giden Yol: Satis, Pazarlama ve Sosyal Medya Elele Kurumsal Performans Yönetimi (EPM) ile Is Potansiyelinizi Açiga Çikarin! Oracle Sunucu ve Veri Depolama Teknolojilerine Hizli Geçis - Avea Basari Hikayesi SAP Uygulamalari Oracle Engineered (Bütünlesik) Sistemler ile Daha Iyi Çalisiyor - Koçtas Basari Hikayesi Oracle EBS R12.2 Yeni Özellikler Oracle Gtech Oracle Innova Oracle Oracle Avea Oracle Koçtas TROUG 15:30-15:40 Kahve Molasi 15:40-16:10 Oracle Real Application Testing (RAT) ile Partitioning Islemleri, Oracle RAT'in Finansbank'taki Kullanim Alanlari Degisen Pazar Kosullarina Hizli Bütçe Revizyonu ile Adaptasyon Mobil Cihazlar için Erisim Yönetimi ve Güvenlik Yönetisim, Yasal Uyumluluk ve Süreç Optimizasyonu Lider Ise Alim Çözümü Taleo ile Bireysel Basaridan Kurumsal Basariya Oracle Bütünlesik Sistemleri ile Kendi Bulut Ortaminizi Yaratin Akçelik ERP Seçimi JDEdwards Exadata - Maximum Availability Architecture Best Practices Avea Finansbank IBTECH Gtech Oracle PwC Oracle Oracle Akçelik Kora Oracle 16:10-16:20 Kahve Molasi 16:20-16:50 Orta Katman da Bulutlu Hizli Veri mi Büyük Veri mi? Her Tür Süreç Ihtiyaci için Oracle BPM - Demo CRM Dünyasinin Tecrübeli Yildizi Siebel'in Bugünü ve Yarini Fusion ile IK Stratejilerinizi Bulutlara Tasimak Esnek ve Dinamik Veri Merkezi Altyapilari Kurulum Süresi En SADE ERP. Oracle Business Accelerator ile ERP'de Jet Hizi! Nefis: EDQ, OGG ve ODI Exadata Üzerinde Oracle Oracle Oracle KRBB Oracle Oracle AWR Oracle SADE Organik Labrys Danismanlik TROUG 16:50-18:00 Kokteyl & Oracle Infiniband Konseri PANELISTLER: Esref Adali: ITÜ Bilgisayar Mühendisligi Bölüm Baskani ve Bilisim Enstitüsü Bilgi Teknolojileri Programi Anabilim Dali Baskani Kemal Ciliz: TÜBISAD Yönetim Kurulu Baskani Zekeriya Besiroglu: Oracle Bilgisayar Programcilar Dernegi Yönetim Kurulu Baskani MODERATÖR: Cem Satana, Oracle Genel Müdür Yardimcisi ">Eger bir kamu kurumunun/kurulusunun çalisani veya görevlisi iseniz, bu etkinlige iliskin önemli etik kurallara iliskin bilgi için lütfen buraya tiklayiniz -- Copyright 2013, Oracle and/or its affiliates. All rights reserved. Bize Ulasin | Yasal Uyarilar | Gizlilik Beyani Etkinlik takvimi : https://blogs.oracle.com/fatihtufekcioglu/resource/Oracle_Day_Istanbul_14.Kasim.2013_blogs.oracle.com.fatihtufekcioglu.html#!

    Read the article

  • bluetooth not working on Ubuntu 13.10

    - by iacopo
    I upgrated ubuntu from 13.4 to 13.10 and my bluetooth stopped working. When I open bluetooth I'm able to put it ON but the visibility doesn't show anything and didn't detect any device. when I: dmesg | grep Blue [ 2.046249] usb 3-1: Product: Bluetooth V2.0 Dongle [ 2.046252] usb 3-1: Manufacturer: Bluetooth v2.0 [ 15.255710] Bluetooth: Core ver 2.16 [ 15.255748] Bluetooth: HCI device and connection manager initialized [ 15.255759] Bluetooth: HCI socket layer initialized [ 15.255765] Bluetooth: L2CAP socket layer initialized [ 15.255776] Bluetooth: SCO socket layer initialized [ 20.110379] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.110386] Bluetooth: BNEP filters: protocol multicast [ 20.110400] Bluetooth: BNEP socket layer initialized [ 20.120635] Bluetooth: RFCOMM TTY layer initialized [ 20.120656] Bluetooth: RFCOMM socket layer initialized [ 20.120660] Bluetooth: RFCOMM ver 1.11 when I digit: lsusb Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 0bc2:2300 Seagate RSS LLC Expansion Portable Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 002: ID 0e6a:6001 Megawin Technology Co., Ltd GEMBIRD Flexible keyboard KB-109F-B-DE Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 002: ID 13ee:0001 MosArt Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub when I: hciconfig -a hci0: Type: BR/EDR Bus: USB BD Address: 00:1B:10:00:2A:EC ACL MTU: 1017:8 SCO MTU: 64:0 DOWN RX bytes:457 acl:0 sco:0 events:16 errors:0 TX bytes:68 acl:0 sco:0 commands:16 errors:0 Features: 0xff 0xff 0x8d 0xfe 0x9b 0xf9 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: Link mode: SLAVE ACCEPT when I digit: rfkill list 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: no 1: hci0: Bluetooth Soft blocked: no Hard blocked: no when I digit: sudo gedit /etc/bluetooth/main.conf [General] # List of plugins that should not be loaded on bluetoothd startup #DisablePlugins = network,input # Default adaper name # %h - substituted for hostname # %d - substituted for adapter id Name = %h-%d # Default device class. Only the major and minor device class bits are # considered. Class = 0x000100 # How long to stay in discoverable mode before going back to non-discoverable # The value is in seconds. Default is 180, i.e. 3 minutes. # 0 = disable timer, i.e. stay discoverable forever DiscoverableTimeout = 0 # How long to stay in pairable mode before going back to non-discoverable # The value is in seconds. Default is 0. # 0 = disable timer, i.e. stay pairable forever PairableTimeout = 0 # Use some other page timeout than the controller default one # which is 16384 (10 seconds). PageTimeout = 8192 # Automatic connection for bonded devices driven by platform/user events. # If a platform plugin uses this mechanism, automatic connections will be # enabled during the interval defined below. Initially, this feature # intends to be used to establish connections to ATT channels. AutoConnectTimeout = 60 # What value should be assumed for the adapter Powered property when # SetProperty(Powered, ...) hasn't been called yet. Defaults to true InitiallyPowered = true # Remember the previously stored Powered state when initializing adapters RememberPowered = false # Use vendor id source (assigner), vendor, product and version information for # DID profile support. The values are separated by ":" and assigner, VID, PID # and version. # Possible vendor id source values: bluetooth, usb (defaults to usb) #DeviceID = bluetooth:1234:5678:abcd # Do reverse service discovery for previously unknown devices that connect to # us. This option is really only needed for qualification since the BITE tester # doesn't like us doing reverse SDP for some test cases (though there could in # theory be other useful purposes for this too). Defaults to true. ReverseServiceDiscovery = true # Enable name resolving after inquiry. Set it to 'false' if you don't need # remote devices name and want shorter discovery cycle. Defaults to 'true'. NameResolving = true # Enable runtime persistency of debug link keys. Default is false which # makes debug link keys valid only for the duration of the connection # that they were created for. DebugKeys = false # Enable the GATT functionality. Default is false EnableGatt = false when I digit: dmesg | grep Bluetooth [ 2.013041] usb 3-1: Product: Bluetooth V2.0 Dongle [ 2.013049] usb 3-1: Manufacturer: Bluetooth v2.0 [ 13.798293] Bluetooth: Core ver 2.16 [ 13.798338] Bluetooth: HCI device and connection manager initialized [ 13.798352] Bluetooth: HCI socket layer initialized [ 13.798357] Bluetooth: L2CAP socket layer initialized [ 13.798368] Bluetooth: SCO socket layer initialized [ 20.184162] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.184173] Bluetooth: BNEP filters: protocol multicast [ 20.184197] Bluetooth: BNEP socket layer initialized [ 20.238947] Bluetooth: RFCOMM TTY layer initialized [ 20.238983] Bluetooth: RFCOMM socket layer initialized [ 20.239018] Bluetooth: RFCOMM ver 1.11 When I digit: uname -a Linux casa-desktop 3.11.0-13-generic #20-Ubuntu SMP Wed Oct 23 07:38:26 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux When I digit: lsmod Module Size Used by parport_pc 32701 0 rfcomm 69070 4 bnep 19564 2 ppdev 17671 0 ip6t_REJECT 12910 1 xt_hl 12521 6 ip6t_rt 13507 3 nf_conntrack_ipv6 18938 9 nf_defrag_ipv6 34616 1 nf_conntrack_ipv6 ipt_REJECT 12541 1 xt_LOG 17718 8 xt_limit 12711 11 xt_tcpudp 12884 32 xt_addrtype 12635 4 nf_conntrack_ipv4 15012 9 nf_defrag_ipv4 12729 1 nf_conntrack_ipv4 xt_conntrack 12760 18 ip6table_filter 12815 1 ip6_tables 27025 1 ip6table_filter nf_conntrack_netbios_ns 12665 0 nf_conntrack_broadcast 12589 1 nf_conntrack_netbios_ns nf_nat_ftp 12741 0 nf_nat 26653 1 nf_nat_ftp kvm_amd 59958 0 nf_conntrack_ftp 18608 1 nf_nat_ftp kvm 431315 1 kvm_amd nf_conntrack 91736 8 nf_nat_ftp,nf_conntrack_netbios_ns,nf_nat,xt_conntrack,nf_conntrack_broadcast,nf_conntrack_ftp,nf_conntrack_ipv4,nf_conntrack_ipv6 iptable_filter 12810 1 crct10dif_pclmul 14289 0 crc32_pclmul 13113 0 ip_tables 27239 1 iptable_filter snd_hda_codec_realtek 55704 1 ghash_clmulni_intel 13259 0 aesni_intel 55624 0 aes_x86_64 17131 1 aesni_intel snd_hda_codec_hdmi 41117 1 x_tables 34059 13 ip6table_filter,xt_hl,ip_tables,xt_tcpudp,xt_limit,xt_conntrack,xt_LOG,iptable_filter,ip6t_rt,ipt_REJECT,ip6_tables,xt_addrtype,ip6t_REJECT lrw 13257 1 aesni_intel snd_hda_intel 48171 5 gf128mul 14951 1 lrw glue_helper 13990 1 aesni_intel ablk_helper 13597 1 aesni_intel joydev 17377 0 cryptd 20329 3 ghash_clmulni_intel,aesni_intel,ablk_helper snd_hda_codec 188738 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel arc4 12608 2 snd_hwdep 13602 1 snd_hda_codec rt2800pci 18690 0 snd_pcm 102033 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel radeon 1402449 3 rt2800lib 79963 1 rt2800pci btusb 28267 0 rt2x00pci 13287 1 rt2800pci rt2x00mmio 13603 1 rt2800pci snd_page_alloc 18710 2 snd_pcm,snd_hda_intel rt2x00lib 55238 4 rt2x00pci,rt2800lib,rt2800pci,rt2x00mmio snd_seq_midi 13324 0 mac80211 596969 3 rt2x00lib,rt2x00pci,rt2800lib snd_seq_midi_event 14899 1 snd_seq_midi ttm 83995 1 radeon snd_rawmidi 30095 1 snd_seq_midi cfg80211 479757 2 mac80211,rt2x00lib drm_kms_helper 52651 1 radeon snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi bluetooth 371880 12 bnep,btusb,rfcomm microcode 23518 0 eeprom_93cx6 13344 1 rt2800pci snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi crc_ccitt 12707 1 rt2800lib snd_timer 29433 2 snd_pcm,snd_seq snd 69141 21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi psmouse 97626 0 drm 296739 5 ttm,drm_kms_helper,radeon k10temp 13126 0 soundcore 12680 1 snd serio_raw 13413 0 i2c_algo_bit 13413 1 radeon i2c_piix4 22106 0 video 19318 0 mac_hid 13205 0 lp 17759 0 parport 42299 3 lp,ppdev,parport_pc hid_generic 12548 0 usbhid 53014 0 hid 105818 2 hid_generic,usbhid pata_acpi 13038 0 usb_storage 62062 1 r8169 67341 0 sdhci_pci 18985 0 sdhci 42630 1 sdhci_pci mii 13934 1 r8169 pata_atiixp 13242 0 ohci_pci 13561 0 ahci 25819 2 libahci 31898 1 ahci Someone can help me?

    Read the article

  • Customize Team Build 2010 – Part 16: Specify the relative reference path

    In the series the following parts have been published Part 1: Introduction Part 2: Add arguments and variables Part 3: Use more complex arguments Part 4: Create your own activity Part 5: Increase AssemblyVersion Part 6: Use custom type for an argument Part 7: How is the custom assembly found Part 8: Send information to the build log Part 9: Impersonate activities (run under other credentials) Part 10: Include Version Number in the Build Number Part 11: Speed up opening my build process template Part 12: How to debug my custom activities Part 13: Get control over the Build Output Part 14: Execute a PowerShell script Part 15: Fail a build based on the exit code of a console application Part 16: Specify the relative reference path As I have already blogged about, it is not intuitive how to specify the paths where the build server has to look for references that are stored in Source Control. It is a common practice to store 3rd party libraries in Source Control, so they are available to everyone, everyone uses the same version of the libraries and updating a library can be done centrally. In Team Build 2010 these paths are specified as a parameter for MSBuild. What we will do in this post is building the values for this parameter based on the values in an argument. You are now pretty aware how to customize the build template, so let’s do the modifications in another way. Instead of opening the xaml file in the workflow designer, we open it in the XML editor. You can open it in the XML Editor by either selecting the Open with menu (see the context menu), or by choosing the View code option. To add this functionality we need to: Specify a new argument Add the argument to the metadata Build the absolute paths for the references and add these paths to the MSBuild arguments 1. Specify a new argument Locate at the top of the document the Members (which are the arguments) of the XAML and add the following line <x:Property Name="ReferencePaths" Type="InArgument(s:String[])" /> 2. Add the argument to the metadata Then locate the line <mtbw:ProcessParameterMetadataCollection> and paste the following line <mtbw:ProcessParameterMetadata Category="Misc" Description="The list of reference paths, relative to the root path in the Workspace mapping." DisplayName="Reference paths" ParameterName="ReferencePaths" /> 3. Build the absolute paths for the references and add these paths to the MSBuild arguments Now locate the place where the assignments are done to the variables used in the agent. And add the following lines after the last Assign activity         <Sequence DisplayName="Initialize ReferencePath" sap:VirtualizedContainerService.HintSize="464,428">           <Sequence.Variables>             <Variable x:TypeArguments="x:String" Name="ReferencePathsArgument">               <Variable.Default>                 <Literal x:TypeArguments="x:String" Value="" />               </Variable.Default>             </Variable>           </Sequence.Variables>           <sap:WorkflowViewStateService.ViewState>             <scg:Dictionary x:TypeArguments="x:String, x:Object">               <x:Boolean x:Key="IsExpanded">True</x:Boolean>             </scg:Dictionary>           </sap:WorkflowViewStateService.ViewState>           <ForEach x:TypeArguments="x:String" DisplayName="Iterate through the paths" sap:VirtualizedContainerService.HintSize="287,206" mtbwt:BuildTrackingParticipant.Importance="Low" Values="[ReferencePaths]">             <ActivityAction x:TypeArguments="x:String">               <ActivityAction.Argument>                 <DelegateInArgument x:TypeArguments="x:String" Name="path" />               </ActivityAction.Argument>               <Assign x:TypeArguments="x:String" DisplayName="Build ReferencePath argument" sap:VirtualizedContainerService.HintSize="257,100" mtbwt:BuildTrackingParticipant.Importance="Low"  To="[ReferencePathsArgument]" Value="[If(String.IsNullOrEmpty(ReferencePathsArgument), &quot;&quot;, ReferencePathsArgument + &quot;;&quot;) + IO.Path.Combine(SourcesDirectory, path)]" />             </ActivityAction>           </ForEach>           <Assign DisplayName="Append the reference paths to the MSBuild Arguments" sap:VirtualizedContainerService.HintSize="287,58">             <Assign.To>               <OutArgument x:TypeArguments="x:String">[MSBuildArguments]</OutArgument>             </Assign.To>             <Assign.Value>               <InArgument x:TypeArguments="x:String">[String.Format("{0} /p:ReferencePath=""{1}""", MSBuildArguments, ReferencePathsArgument)]</InArgument>             </Assign.Value>           </Assign>         </Sequence> Now you can use the template to specify the paths relative to SourcesDirectory. You can download the full solution at BuildProcess.zip. It will include the sources of every part and will continue to evolve.

    Read the article

  • Now Available &ndash; Windows Azure SDK 1.6

    - by Shaun
    Microsoft has just announced the Windows Azure SDK 1.6 and the Windows Azure Tools for Visual Studio 1.6. Now people can download the latest product through the WebPI. After you downloaded and installed the SDK you will find that The SDK 1.6 can be stayed side by side with the SDK 1.5, which means you can still using the 1.5 assemblies. But the Visual Studio Tools would be upgraded to 1.6. Different from the previous SDK, in this version it includes 4 components: Windows Azure Authoring Tools, Windows Azure Emulators, Windows Azure Libraries for .NET 1.6 and the Windows Azure Tools for Microsoft Visual Studio 2010. There are some significant upgrades in this version, which are Publishing Enhancement: More easily connect to the Windows Azure when publish your application by retrieving a publish setting file. It will let you configure some settings of the deployment, without getting back to the developer portal. Multi-profiles: The publish settings, cloud configuration files, etc. will be stored in one or more MSBuild files. It will be much easier to switch the settings between vary build environments. MSBuild Command-line Build Support. In-Place Upgrade Support.   Publishing Enhancement So let’s have a look about the new features of the publishing. Just create a new Windows Azure project in Visual Studio 2010 with a MVC 3 Web Role, and right-click the Windows Azure project node in the solution explorer, then select Publish, we will find the new publish dialog. In this version the first thing we need to do is to connect to our Windows Azure subscription. Click the “Sign in to download credentials” link, we will be navigated to the login page to provide the Live ID. The Windows Azure Tool will generate a certificate file and uploaded to the subscriptions those belong to us. Then we will download a PUBLISHSETTINGS file, which contains the credentials and subscriptions information. The Visual Studio Tool will generate a certificate and deployed to the subscriptions you have as the Management Certificate. The VS Tool will use this certificate to connect to the subscription in the next step. In the next step, I would back to the Visual Studio (the publish dialog should be stilling opened) and click the Import button, select the PUBLISHSETTINGS file I had just downloaded. Then all my subscriptions will be shown in the dropdown list. Select a subscription that I want the application to be published and press the Next button, then we can select the hosted service, environment, build configuration and service configuration shown in the dialog. In this version we can create a new hosted service directly here rather than go back to the developer portal. Just select the <Create New …> item in the hosted service. What we need to do is to provide the hosted service name and the location. Once clicked the OK, after several seconds the hosted service will be established. If we went to the developer portal we will find the new hosted service in my subscription. a) Currently we cannot select the Affinity Group when create a new hosted service through the Visual Studio Publish dialog. b) Although we can specify the hosted service name and DNS prefixing through the developer portal, we cannot do so from the VS Tool, which means the DNS prefixing would be the same as what we specified for the hosted service name. For example, we specified our hosted service name as “Sdk16Demo”, so the public URL would be http://sdk16demo.cloudapp.net/. After created a new hosted service we can select the cloud environment (production or staging), the build configuration (release or debug), and the service configuration (cloud or local). And we can set the Remote Desktop by check the related checkbox as well. One thing should be note is that, in this version when we set the Remote Desktop settings we don’t need to specify a certificate by default. This is because the Visual Studio will generate a new certificate for us by default. But we can still specify an existing certificate for RDC, by clicking the “More Options” button. Visual Studio Tool will create another certificate for the Remote Desktop connection. It will NOT use the certificate that managing the subscription. We also can select the “Advanced Settings” page to specify the deployment label, storage account, IntelliTrace and .NET profiling information, etc.. Press Next button, the dialog will display all settings I had just specified and it will save them as a new profile. The last step is to click the Publish button. Since we enabled the Remote Desktop feature, the first step of publishing was uploading the certificate. And then it will verify the storage account we specified and upload the package, then finally created the website in Windows Azure.   Multi-Profiles After published, if we back to the Visual Studio we can find a AZUREPUBXML file under the Profiles folder in the Azure project. It includes all settings we specified before. If we publish this project again, we can just use the current settings (hosted service, environment, RDC, etc.) from this profile without input them again. And this is very useful when we have more than one deployment settings. For example it would be able to have one AZUREPUBXML profile for deploying to testing environment (debug building, less roles with RDC and IntelliTrace) and one for production (release building, more roles but without IntelliTrace).   In-Place Upgrade Support Let’s change some codes in the MVC pages and click the Publish menu from the azure project node. No need to specify any settings,  here we can use the pervious settings by loading the azure profile file (AZUREPUBXML). After clicked the Publish button the VS Tool brought a dialog to us to indicate that there’s a deployment available in the hosted service environment, and prompt to REPLACE it or not. Notice that in this version, the dialog tool said “replace” rather than “delete”, which means by default the VS Tool will use In-Place Upgrade when we deploy to a hosted service that has a deployment already exist. After click Yes the VS Tool will upload the package and perform the In-Place Upgrade. If we back to the developer portal we can find that the status of the hosted service was turned to “Updating…”. But in the previous SDK, it will try to delete the whole deployment and publish a new one.   Summary When the Microsoft announced the features that allows the changing VM size via In-Place Upgrade, they also mentioned that in the next few versions the user experience of publishing the azure application would be improved. The target was trying to accomplish the whole publish experience in Visual Studio, which means no need to touch developer portal any more. In the SDK 1.6 we can see from the new publish dialog, as a developer we can do the whole process, includes creating hosted service, specifying the environment, configuration, remote desktop, etc. values without going back the the developer portal.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

    Read the article

  • Some New .NET Toys (Repost)

    - by Kevin Grossnicklaus
    Last week I was fortunate enough to spend time in Redmond on Microsoft’s campus for the 2011 Microsoft MVP Summit. It was great to hang out with a number of old friends and get the opportunity to talk tech with the various product teams up at Microsoft. The weather wasn’t exactly sunny but Microsoft always does a great job with the Summit and everyone had a blast (heck, I even got to run the bases at SafeCo field) While much of what we saw is covered under NDA, there a ton of great things in the pipeline from Microsoft and many things that are already available (or just became so) that I wasn’t necessarily aware of. The purpose of this post is to share some of the info I learned on resources and tools available to .NET developers today. Please let me know if you have any questions (or if you know of something else cool which might benefit others). Enjoy! Visual Studio 2010 SP1 Microsoft has issued the RTM release of Visual Studio 2010 SP1. You can download the full SP1 on MSDN as of today (March 10th to the general public) and take advantage of such things as: Silverlight 4 is included in the box (as opposed to a separate install) Silverlight 4 Profiling WCF RIA Services SP1 Intellitrace for 64-bit and SharePoint ASP.NET now easily supports IIS Express and SQL CE Want a description of all that’s new beyond the above biased list (which arguably only contains items I think are important)? Check out this KB article. Portable Library Tools CTP Without much fanfare Microsoft has released a CTP of a new add-in to Visual Studio 2010 which simplifies code sharing between projects targeting different runtimes (i.e. Silverlight, WPF, Win7 Phone, XBox). With this Add-In installed you can add a new project of type “Portable Library” and specify which platforms you wish to target. Once that is done, any code added to this library will be limited to use only features which are common to all selected frameworks. Other projects can now reference this portable library and be provided assemblies custom built to their environment. This greatly simplifies the current process of sharing linked files between platforms like WPF and Silverlight. You can find out more about this CTP and how it works on this great blog post. Visual Studio Async CTP Microsoft has also released a CTP of a set of language and framework enhancements to provide a much more powerful asynchronous programming model. Due to the focus on async programming in all types of platforms (and it being the ONLY option in Silverlight and Win7 phone) a move towards a simpler and more understandable model is always a good thing. This CTP (called Visual Studio Async CTP) can be downloaded here. You can read more about this CTP on this blog post. MSDN Code Samples Gallery Microsoft has also launched new code samples gallery on their MSDN site: http://code.msdn.microsoft.com/. This site allows you to easily search for small samples of code related to a particular technology or platform. If a sample of code you are looking for is not found, you can request one via the site and other developers can see your request and provide a sample to the site to suit your needs. You can also peruse requested samples and, if you find a scenario where you can provide value, upload your own sample for the benefit of others. Samples are packaged into the VS .vsix format and include any necessary references/dependencies. By using .vsix as the deployment mechanism, as samples are installed from the site they are kept in your Visual Studio 2010 Samples Gallery and kept for your future reference. If you get a chance, check out the site and see how it is done. Although a somewhat simple concept, I was very impressed with their implementation and the way they went about trying to suit a need. I’ll definitely be looking there in the future as need something or want to share something. MSDN Search Capabilities Another item I learned recently and was not aware of (that might seem trivial to some) is the power of the MSDN site’s search capabilities. Between the Code Samples Gallery described above and the search enhancements on MSDN, Microsoft is definitely investing in their platform to help provide developers of all skill levels the tools and resources they need to be successful. What do I mean by the MSDN search capability and why should you care? If you go to the MSDN home page (http://msdn.microsoft.com) and use the “Search MSDN with Big” box at the very top of the page you will see some very interesting results. First, the search actually doesn’t just search the MSDN library it searches: MSDN Library All Microsoft Blogs CodePlex StackOverflow Downloads MSDN Magazine Support Knowledgebase (I’m not sure it even ends there but the above are all I know of) Beyond just searching all the above locations, the results are formatted very nicely to give some contextual information based on where the result came from. For example, if a keyword search returned results from CodePlex, each row in the search results screen would include a large amount of information specific to CodePlex such as: Looking at the above results immediately tells you everything from the page views to the CodePlex ratings. All in all, knowing that this much information is indexed and available from a single search location will lead me to utilize this as one of my initial searches for development information.

    Read the article

  • My Tech Ed North America Preview - Content Edition

    - by Chris Gardner
    As I promised in my last post, I feel the need to give you a rundown on all the technical content I am looking forward to checking out at Tech Ed this year. We shall start with the content I know I'll be able to see. This would be some demo stations in the Technical Learning Center. I will DEFINITELY be checking out the Windows Phone Device Bar. I will admit that I am a bit of a phone snob, and I just want to manhandle all that sexy, sexy tech. I am also planning on talking to the Windows Phone team and the Azure team. Year after year, I end up spending more time in either the TLC or taking certification tests than anywhere else. This leads me to the one "Exam Cram" session I hope to attend. There is a session to cram for 70-599: Designing and Developing Windows Phone Applications. I know this seems odd. I'm (sort of) an XNA guru. However, I'm not that up on my Silverlight. I know enough to add Silverlight to an XNA project. Now, let's talk breakout sessions. We always need to keep track of where we're going. I know, I talk about solving problems over forcing buzz words. However, it is important to know what those buzz words before you tell people not to use them. For this, we will look to the "What's New in Visual Studio 11" and "What's New in Microsoft .NET Framework 4.5." Of course, we do talk bad about buzz words around here. For this, I'm really looking forward to "Visual C#/Visual Basic: Becoming a Guru with Existing Features." I still have .NET 2 tricks that are crucial to my internal libraries. In depth knowledge will NEVER trump shortcut libraries. There is a session in ASP.NET for phones and tablets. For those of you that have not tried to use ASP.NET on a mobile device, there is one thing you really need to understand. Mobile devices don't use scroll bars. That's right; the thing with the least screen real estate doesn't use scroll bars. Thus, I am hoping this session will give some good advice in having an ASP.NET site target both mobile and desktop. The last "business only" session "The Accidental Team Foundation Server Admin." T & W Operations is a VERY small business. As such, I am the TFS admin because I'm the developer that is also the SQL Guru. I keep my server up, but it'd be nice to know some really cool tricks for the part time guy. This leads us the the fun sessions. Coding4Fun has a Kinect session. The Twitter followers will remember that I now have a Kinect for Windows sitting on my desk at work. I have gotten pretty handy with the device, but I KNOW I'm missing some good stuff. Finally, we come to Brian Prince's session on "Making Crazy Money with Games and the Cloud." Never mind the fact that we're using Azure at work. Never mind the fact that I'm actually using the cloud in a game. Never mind the fact that the session has the terms "Crazy Money" and "Games" in the title. If you've never seen Brian Prince speak, you're missing out. In the Hands-on-Labs, we are not allowed to make our own schedule. Instead, we're asked what sessions we can't miss, and they try to schedule around those times. This was the one session I said I couldn't miss. This should complete the technical content for the conference. Coming soon, I'll dig into the certifications I hope to attain. Then, we'll talk about the social activities for the week. Here's a preview of that. I am a member of The Krewe...

    Read the article

  • Using the HTML5 &lt;input type=&quot;file&quot; multiple=&quot;multiple&quot;&gt; Tag in ASP.NET

    - by Rick Strahl
    Per HTML5 spec the <input type="file" /> tag allows for multiple files to be picked from a single File upload button. This is actually a very subtle change that's very useful as it makes it much easier to send multiple files to the server without using complex uploader controls. Please understand though, that even though you can send multiple files using the <input type="file" /> tag, the process of how those files are sent hasn't really changed - there's still no progress information or other hooks that allow you to automatically make for a nicer upload experience without additional libraries or code. For that you will still need some sort of library (I'll post an example in my next blog post using plUpload). All the new features allow for is to make it easier to select multiple images from disk in one operation. Where you might have required many file upload controls before to upload several files, one File control can potentially do the job. How it works To create a file input box that allows with multiple file support you can simply do:<form method="post" enctype="multipart/form-data"> <label>Upload Images:</label> <input type="file" multiple="multiple" name="File1" id="File1" accept="image/*" /> <hr /> <input type="submit" id="btnUpload" value="Upload Images" /> </form> Now when the file open dialog pops up - depending on the browser and whether the browser supports it - you can pick multiple files. Here I'm using Firefox using the thumbnail preview I can easily pick images to upload on a form: Note that I can select multiple images in the dialog all of which get stored in the file textbox. The UI for this can be different in some browsers. For example Chrome displays 3 files selected as text next to the Browse… button when I choose three rather than showing any files in the textbox. Most other browsers display the standard file input box and display the multiple filenames as a comma delimited list in the textbox. Note that you can also specify the accept attribute in the <input> tag, which specifies a mime-type to specify what type of content to allow.Here I'm only allowing images (image/*) and the browser complies by just showing me image files to display. Likewise I could use text/* for all text formats registered on the machine or text/xml to only show XML files (which would include xml,xst,xsd etc.). Capturing Files on the Server with ASP.NET When you upload files to an ASP.NET server there are a couple of things to be aware of. When multiple files are uploaded from a single file control, they are assigned the same name. In other words if I select 3 files to upload on the File1 control shown above I get three file form variables named File1. This means I can't easily retrieve files by their name:HttpPostedFileBase file = Request.Files["File1"]; because there will be multiple files for a given name. The above only selects the first file. Instead you can only reliably retrieve files by their index. Below is an example I use in app to capture a number of images uploaded and store them into a database using a business object and EF 4.2.for (int i = 0; i < Request.Files.Count; i++) { HttpPostedFileBase file = Request.Files[i]; if (file.ContentLength == 0) continue; if (file.ContentLength > App.Configuration.MaxImageUploadSize) { ErrorDisplay.ShowError("File " + file.FileName + " is too large. Max upload size is: " + App.Configuration.MaxImageUploadSize); return View("UploadClassic",model); } var image = new ClassifiedsBusiness.Image(); var ms = new MemoryStream(16498); file.InputStream.CopyTo(ms); image.Entered = DateTime.Now; image.EntryId = model.Entry.Id; image.ContentType = "image/jpeg"; image.ImageData = ms.ToArray(); ms.Seek(0, SeekOrigin.Begin); // resize image if necessary and turn into jpeg Bitmap bmp = Imaging.ResizeImage(ms.ToArray(), App.Configuration.MaxImageWidth, App.Configuration.MaxImageHeight); ms.Close(); ms = new MemoryStream(); bmp.Save(ms,ImageFormat.Jpeg); image.ImageData = ms.ToArray(); bmp.Dispose(); ms.Close(); model.Entry.Images.Add(image); } This works great and also allows you to capture input from multiple input controls if you are dealing with browsers that don't support multiple file selections in the file upload control. The important thing here is that I iterate over the files by index, rather than using a foreach loop over the Request.Files collection. The files collection returns key name strings, rather than the actual files (who thought that was good idea at Microsoft?), and so that isn't going to work since you end up getting multiple keys with the same name. Instead a plain for loop has to be used to loop over all files. Another Option in ASP.NET MVC If you're using ASP.NET MVC you can use the code above as well, but you have yet another option to capture multiple uploaded files by using a parameter for your post action method.public ActionResult Save(HttpPostedFileBase[] file1) { foreach (var file in file1) { if (file.ContentLength < 0) continue; // do something with the file }} Note that in order for this to work you have to specify each posted file variable individually in the parameter list. This works great if you have a single file upload to deal with. You can also pass this in addition to your main model to separate out a ViewModel and a set of uploaded files:public ActionResult Edit(EntryViewModel model,HttpPostedFileBase[] uploadedFile) You can also make the uploaded files part of the ViewModel itself - just make sure you use the appropriate naming for the variable name in the HTML document (since there's Html.FileFor() extension). Browser Support You knew this was coming, right? The feature is really nice, but unfortunately not supported universally yet. Once again Internet Explorer is the problem: No shipping version of Internet Explorer supports multiple file uploads. IE10 supposedly will, but even IE9 does not. All other major browsers - Chrome, Firefox, Safari and Opera - support multi-file uploads in their latest versions. So how can you handle this? If you need to provide multiple file uploads you can simply add multiple file selection boxes and let people either select multiple files with a single upload file box or use multiples. Alternately you can do some browser detection and if IE is used simply show the extra file upload boxes. It's not ideal, but either one of these approaches makes life easier for folks that use a decent browser and leaves you with a functional interface for those that don't. Here's a UI I recently built as an alternate uploader with multiple file upload buttons: I say this is my 'alternate' uploader - for my primary uploader I continue to use an add-in solution. Specifically I use plUpload and I'll discuss how that's implemented in my next post. Although I think that plUpload (and many of the other packaged JavaScript upload solutions) are a better choice especially for large uploads, for simple one file uploads input boxes work well enough. The advantage of this solution is that it's very easy to handle on the server side. Any of the JavaScript controls require special handling for uploads which I'll also discuss in my next post.© Rick Strahl, West Wind Technologies, 2005-2012Posted in HTML5  ASP.NET  MVC   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • Simple way of converting server side objects into client side using JSON serialization for asp.net websites

    - by anil.kasalanati
     Introduction:- With the growth of Web2.0 and the need for faster user experience the spotlight has shifted onto javascript based applications built using REST pattern or asp.net AJAX Pagerequest manager. And when we are working with javascript wouldn’t it be much better if we could create objects in an OOAD way and easily push it to the client side.  Following are the reasons why you would push the server side objects onto client side -          Easy availability of the complex object. -          Use C# compiler and rick intellisense to create and maintain the objects but use them in the javascript. You could run code analysis etc. -          Reduce the number of calls we make to the server side by loading data on the pageload.   I would like to explain about the 3rd point because that proved to be highly beneficial to me when I was fixing the performance issues of a major website. There could be a scenario where in you be making multiple AJAX based webrequestmanager calls in order to get the same response in a single page. This happens in the case of widget based framework when all the widgets are independent but they need some common information available in the framework to load the data. So instead of making n multiple calls we could load the data needed during pageload. The above picture shows the scenario where in all the widgets need the common information and then call GetData webservice on the server side. Ofcourse the result can be cached on the client side but a better solution would be to avoid the call completely.  In order to do that we need to JSONSerialize the content and send it in the DOM.                                                                                                                                                                                                                                                                                                                                                                                            Example:- I have developed a simple application to demonstrate the idea and I would explaining that in detail here. The class called SimpleClass would be sent as serialized JSON to the client side .   And this inherits from the base class which has the implementation for the GetJSONString method. You can create a single base class and all the object which need to be pushed to the client side can inherit from that class. The important thing to note is that the class should be annotated with DataContract attribute and the methods should have the Data Member attribute. This is needed by the .Net DataContractSerializer and this follows the opt-in mode so if you want to send an attribute to the client side then you need to annotate the DataMember attribute. So if I didn’t want to send the Result I would simple remove the DataMember attribute. This is default WCF/.Net 3.5 stuff but it provides the flexibility of have a fullfledged object on the server side but sending a smaller object to the client side. Sometimes you may hide some values due to security constraints. And thing you will notice is that I have marked the class as Serializable so that it can be stored in the Session and used in webfarm deployment scenarios. Following is the implementation of the base class –  This implements the default DataContractJsonSerializer and for more information or customization refer to following blogs – http://softcero.blogspot.com/2010/03/optimizing-net-json-serializing-and-ii.html http://weblogs.asp.net/gunnarpeipman/archive/2010/12/28/asp-net-serializing-and-deserializing-json-objects.aspx The next part is pretty simple, I just need to inject this object into the aspx page.   And in the aspx markup I have the following line – <script type="text/javascript"> var data =(<%=SimpleClassJSON  %>);   alert(data.ResultText); </script>   This will output the content as JSON into the variable data and this can be any element in the DOM. And you can verify the element by checking data in the Firebug console.    Design Consideration – If you have a lot of javascripts then you need to think about using Script # and you can write javascript in C#. Refer to Nikhil’s blog – http://projects.nikhilk.net/ScriptSharp Ensure that you are taking security into consideration while exposing server side objects on to client side. I have seen application exposing passwords, secret key so it is not a good practice.   The application can be tested using the following url – http://techconsulting.vpscustomer.com/Samples/JsonTest.aspx The source code is available at http://techconsulting.vpscustomer.com/Source/HistoryTest.zip

    Read the article

  • Reading All Users Session

    - by imran_ku07
      Introduction :            InProc Session is the widely used state management. Storing the session state Inproc is also the fastest method and is well-suited to small amounts of volatile data. Reading and writing current user Session is very easy. But some times we need to read all users session before taking a decision or sometimes we may need to check which users are currently active with the help of Session. But unfortunately there is no class in .Net Framework (i don't found myself) to read all user InProc Session Data. In this article i will use reflection to read all user Inproc Session.   Description :              This code will work equally in both MVC and webform, but for demonstration i will use a simple webform example. So let's create a simple Website and Add two aspx pages, Default.aspx and Default2.aspx. In Default.aspx just add a link to navigate to Default2.aspx and in Default.aspx.cs just add a Session. Default.aspx: <%@ Page Language="C#" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="Default" %><!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"><html ><head runat="server">    <title>Untitled Page</title></head><body>    <form id="form1" runat="server">    <div>        <a href="Default2.aspx">Click to navigate to next page</a>    </div>    </form></body></html>  Default.aspx.cs:  using System;using System.Data;using System.Configuration;using System.Collections;using System.Web;using System.Web.Security;using System.Web.UI;using System.Web.UI.WebControls;using System.Web.UI.WebControls.WebParts;using System.Web.UI.HtmlControls;public partial class Default : System.Web.UI.Page{    protected void Page_Load(object sender, EventArgs e)    {        Session["User"] = "User" + DateTime.Now;    }} Now when every user click this link will navigate to Default2.aspx where all the magic appears.Default2.aspx.cs: using System;using System.Data;using System.Configuration;using System.Collections;using System.Web;using System.Web.Security;using System.Web.UI;using System.Web.UI.WebControls;using System.Web.UI.WebControls.WebParts;using System.Web.UI.HtmlControls;using System.Reflection;using System.Web.SessionState;public partial class Default2 : System.Web.UI.Page{    protected void Page_Load(object sender, EventArgs e)    {        object obj = typeof(HttpRuntime).GetProperty("CacheInternal", BindingFlags.NonPublic | BindingFlags.Static).GetValue(null, null);        Hashtable c2 = (Hashtable)obj.GetType().GetField("_entries", BindingFlags.NonPublic | BindingFlags.Instance).GetValue(obj);        foreach (DictionaryEntry entry in c2)        {            object o1 = entry.Value.GetType().GetProperty("Value", BindingFlags.NonPublic | BindingFlags.Instance).GetValue(entry.Value, null);            if (o1.GetType().ToString() == "System.Web.SessionState.InProcSessionState")            {                SessionStateItemCollection sess = (SessionStateItemCollection)o1.GetType().GetField("_sessionItems", BindingFlags.NonPublic | BindingFlags.Instance).GetValue(o1);                if (sess != null)                {                    if (sess["User"] != null)                    {                        Label1.Text += sess["User"] + " is Active.<br>";                    }                }            }        }    }}            Now just open more than one browsers or more than one browser instance and then navigate to Default.aspx and click the link, you will see all the user's Session data.    How this works :        InProc session data is stored in the HttpRuntime’s internal cache in an implementation of ISessionStateItemCollection that implements ICollection. In this code, first of all i got CacheInternal Static Property of HttpRuntime class and then with the help of this object i got _entries private member which is of type ICollection. Then simply enumerate this dictionary and only take object of type System.Web.SessionState.InProcSessionState and finaly got SessionStateItemCollection for each user.Summary :        In this article, I shows you how you can get all current user Sessions. However one thing you will find when executing this code is that it will not show the current user Session which is set in the current request context because Session will be saved after all the Page Events.

    Read the article

  • Build an Organization Chart In Visio 2010

    - by Mysticgeek
    With trying to manage a business these days, it’s very important to have an Organization Chart to keep everything manageable. Here we’ll show you how to build one in Visio 2010. This Guest Article was written by our friends over at Office 2010 Club. Need for Organization Charts The need of creating Organization Charts are becoming indispensable these days, as companies start focusing on extensive hiring for far reach availability, increase in productivity and targeting diverse markets. Considering this rigorous change, creating an organization chart can help stakeholders in comprehending the ever growing organization structure & hierarchy with an ease. It shows the basic structure of organization along with defining the relationships between employees working in different departments. Opportunely, Microsoft Visio 2010 offers an easy way to create Organization chart. As before now, orthodox ways of listing organization hierarchy have been used for defining the structure of departments along with communication possible including; horizontal and vertical communications. To transform these lists which defines organizational structure, into a detailed chart, Visio 2010 includes an add-in for importing Excel spreadsheet, which comes in handy for pulling out data from spreadsheet to create an organization chart. Importantly, you don’t need to indulge yourself in maze of defining organizational hierarchies and chalking-out structure, as you just need to specify the column & row headers, along with data you need to import and it will automatically create out chart defining; organizational hierarchies with specified credentials of each employee, categorized in their corresponding departments. Creating Organization Charts in Visio 2010 To start off with, we have created an Excel spreadsheet having fields, Name, Supervisor, Designation, Department and Phone. The Name field contains name of all the employees working in different departments, whereas Supervisor field contains name of supervisors or team leads. This field is vital for creating Organization Chart, as it defines the basic structure & hierarchy in chart. Now launch Visio 2010, head over to View tab, under Add-Ons menu, from Business options, click Organization Chart Wizard. This will start Organization Chart Wizard, in the first step, enable Information that’s already stored in a file or database option, and click Next. As we are importing Excel sheet, select the second option for importing Excel spreadsheet. Specify the Excel file path and click Next to continue. In this step, you need to specify the fields which actually defines the structure of an organization. In our case, these are Name & Supervisor fields. After specifying fields, click Next to Proceed further. As organization chart is primarily for showing the hierarchy of departments/employees working in organization along with how they are linked together, and who supervises whom. Considering this, in this step we will leave out Supervisor field, because it’s inclusion wouldn’t be necessary as Visio automatically chalks-out the basic structure defined in Excel sheet. Add the rest of the fields under Displayed fields category, and click Next. Now choose the fields which you want to include in Organization Chart’s shapes and click Next. This step is about breaking the chart into multiple pages, if you are dealing with 100+ employees, you may want to specify numbers of pages on which Organization Chart will be displayed. But in our case, we are dealing with much less amount of data, so we will enable I want the wizard to automatically break my organization chart across pages option. Specify the name you need to show on the top of the page. If you are having less than 20 hierarchies, enter the name of the highest ranked employee in organization and click Finish to end the wizard. It will instantly create an Organization chart out of specified Excel spreadsheet. Highest ranked employee will be shown on top of the organization chart, supervising various employees from different departments. As shown below, his immediate subordinates further manages other employees and so on. For advance customizations, head over to Org Chart tab, here you will find different groups for setting up the Org Chart’s hierarchy and manage other employees’ positions. Under Arrange group, shapes’ arrangements can be changed and it provides easy navigation through the chart. You can also change the type of the position and hide subordinates of selected employee. From Picture group, you can insert a picture of the employees, departments, etc. From synchronization group, you have the option of creating a synced copy and expanding subordinates of selected employee. Under Organization Data group, you can change whole layout of Organization chart from Display Options including; shape display, show divider, enable/disable imported fields, change block position, and fill colors, etc. If at any point of time, you need to insert new position or announce vacancy, Organization Chart stencil is always available on the left sidebar. Drag the desired Organization Chart shape into main diagram page, to maintain the structure integrity, i.e, for inserting subordinates for a specific employee, drag the position shape over the existing employee shape box. For instance, We have added a consultant in organization, who is directly under CEO, for maintaining this, we have dragged the Consultant box and just dropped it over the CEO box to make the immediate subordinate position. Adding details to new position is a cinch, just right-click new position box and click Properties. This will open up Shape Data dialog, start filling in all the relevant information and click OK. Here you can see the newly created position is easily populated with all the specified information. Now expanding an Organization Chart doesn’t require maintenance of long lists any more. Under Design tab, you can also try out different designs & layouts over organization chart to make it look more flamboyant and professional.  Conclusion An Organization Chart is a great way of showing detailed organizational hierarchies; with defined credentials of employees, departments structure, new vacancies, newly hired employees, recently added departments, and importantly shows most convenient way of interaction between different departments & employees, etc. Similar Articles Productive Geek Tips Geek Reviews: Using Dia as a Free Replacement for Microsoft VisioMysticgeek Blog: Create Appealing Charts In Excel 2007Create Charts in Excel 2007 the Easy Way with Chart AdvisorCreate a Hyperlink in a Word 2007 Flow Chart and Hide Annoying ScreenTipsCreate A Flow Chart In Word 2007 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Know if Someone Accessed Your Facebook Account Shop for Music with Windows Media Player 12 Access Free Documentaries at BBC Documentaries Rent Cameras In Bulk At CameraRenter Download Songs From MySpace Steve Jobs’ iPhone 4 Keynote Video

    Read the article

< Previous Page | 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373  | Next Page >