Search Results

Search found 86974 results on 3479 pages for 'visualsvn server'.

Page 1384/3479 | < Previous Page | 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391  | Next Page >

• Multiple Routers, Failover, DHCP and multiple gateways. NOT WAN-failover

  - by u_b

  I've had a look around google and this forum but could not find an answer to my question. So probably one of you can help me a little. My intended setup is: Router R1: wan connection to isp. connected backup server. provides some wireless SSID. other connected devices like printer, laptop, etc. both wired and wireless. Router R2: no wan connection to isp but connected to R2. connects mp3-streamer and music server. also serves as a wireless access point with same SSID. other than described connections only wireless connections. I would like to be able to control music even if R1 is off, e.g. with no internet connection. On the other hand I would like to access internet also in the case that R2 is off, i.e. no music access. Last but not least I would like to stream internet radio, i.e., R1 and R2 are on, and music is streamed from internet to R1 to R2 to streamer. I would like to realize all this using DHCP (also using static assignments) so i do not have to configure statically on android, laptop, etc. So my questions are: Can I make DHCP provide a list of two default gateways R1,R2? In order to make clients fallback to other gateway if currently assigned gateway is turned off? Thanks in advance, u_b

  Read the article

• Virtual box host-only adapter configuration

  - by Xoundboy

  I have VirtualBox 4 running on Win 7 with a Centos 6 guest VM set up for hosting my dev server. When I'm connected to my home network the guest can be accessed via a static IP address that I configured (192.168.56.2), but not when I'm in the office. I'm guessing that the DHCP server in the office doesn't have a gateway configured for the 192.168.56.x IP range. I read something about the VB host-only adapter that should allow me to set this guest VM up in such a way that I don't need to be on any network to be able to access the guest from the host using a static IP. I've not been able to find out exactly how to configure this though. Can anyone give me an example configuration, thanks. UPDATE: Thanks for your responses. I've now set up a single virtual network adapter in VirtualBox and set it to host-only: C:\Users\Ben>vboxmanage list hostonlyifs Name: VirtualBox Host-Only Ethernet Adapter GUID: d419ef62-3c46-4525-ad2d-be506c90459a Dhcp: Disabled IPAddress: 192.168.56.2 NetworkMask: 255.255.255.0 IPV6Address: fe80:0000:0000:0000:78e3:b200:5af3:2a57 IPV6NetworkMaskPrefixLength: 64 HardwareAddress: 08:00:27:00:94:e8 MediumType: Ethernet Status: Up VBoxNetworkName: HostInterfaceNetworking-VirtualBox Host-Only Ethernet Adapter On the guest I've set up eth0 to use the same IP address as the host-only adapter (192.168.56.2) but when I try to log in using Putty I still get "Network Error : connection refused". VirtualBox DHCP servier is enabled but I can't ping the gateway (192.168.56.1) from either host nor guest. There's no firewall running on either OS. What next?

  Read the article

• ssh - "Connection closed by xxx.xxx.xxx.xxx" - using password

  - by Michael B

  I attempted to create an new user account that I wish to use to log in using ssh. I did this (in CentOs): /usr/sbin/adduser -d /home/testaccount -s /bin/bash user passwd testaccount This is the error I receive when trying to log in via ssh: ~/.ssh$ ssh -v [email protected] OpenSSH_5.1p1 Debian-5ubuntu1, OpenSSL 0.9.8g 19 Oct 2007 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to xxx.xxx.xxx [xxx.xxx.xxx.xxx] port 22. debug1: Connection established. debug1: identity file /home/user/.ssh/identity type -1 debug1: identity file /home/user/.ssh/id_rsa type 1 debug1: Checking blacklist file /usr/share/ssh/blacklist.RSA-2048 debug1: Checking blacklist file /etc/ssh/blacklist.RSA-2048 debug1: identity file /home/user/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_4.3 debug1: match: OpenSSH_4.3 pat OpenSSH_4* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.1p1 Debian-5ubuntu1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-cbc hmac-md5 none debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'xxx.xxx.xxx.xxx' is known and matches the RSA host key. debug1: Found key in /home/user/.ssh/known_hosts:8 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-with-mic,password debug1: Next authentication method: gssapi-with-mic debug1: Unspecified GSS failure. Minor code may provide more information No credentials cache found debug1: Unspecified GSS failure. Minor code may provide more information No credentials cache found debug1: Unspecified GSS failure. Minor code may provide more information debug1: Next authentication method: publickey debug1: Offering public key: /home/user/.ssh/id_rsa debug1: Authentications that can continue: publickey,gssapi-with-mic,password debug1: Trying private key: /home/user/.ssh/identity debug1: Trying private key: /home/user/.ssh/id_dsa debug1: Next authentication method: password testaccount@xxx's password: Connection closed by xxx.xxx.xxx.xxx The "connection closed" message appeared immediately after entering the password (if I enter the wrong password it waits and then prompts for another password) I am able to log in from the same computer using other accounts that had been setup previously. When logged into the remote machine I am able to do 'su testaccount' Thanks for your time.

  Read the article

• Exchange 2003: Accounts with only OWA access unable to change passwords when expired or forced

  - by radioactive21

  We have accounts whith only OWA access, because they are generic accounts and we do not want the accounts to be used as machine logins. We have a password policy that users must change their passwords every 6 months. The problem we are having is that since the accounts are not loging into the machines, when the password policy kicks in it is preventing users with OWA only access from changing their password. Also, when we select "User must change the password at next logon" it also causes the same issue. We have two exchange servers the main one and a front end one. what we have been doing with these generic account is in properties, under the "account" tab we restricted "log on to" to the front end server. Just to clarify, when we have no restrictions, users can change their passwords via the web without any issues. It is only when we force them to only login via OWA that they cant change passwords. I tried adding our domain controler and main exchange server to the "This user can log on to The following computers" in the account tab, but still it is not allowing them to change passwords. Currently I have to manually reset the passwords for OWA only accounts. Is there anyway to allow OWA acconts to change passwords? EDIT: Users restricted to only OWA can change their password via the web browser without any issues when there are no restrictions. In other words normally they can just log into outlook via the web and change their password, but when the password policy expires or we force them to change their password at next login, they are unable to.

  Read the article

• Apache: getting proxy, rewrite, and SSL to play nice

  - by Rich M

  Hi, I'm having loads of trouble trying to integrate proxy, rewrite, and SSL altogether in Apache 2. A brief history, my application runs on port 8080 and before adding SSL, I used proxy to strip the 8080 from the url's to and from the server. So instead of www.example.com:8080/myapp, the client app accessed everything via www.example.com/myapp Here was the conf the accomplished this: ProxyRequests Off <Proxy */myapp> Order deny,allow Allow from all </Proxy> ProxyPass /myapp http://www.example.com:8080/myapp ProxyPassReverse /myapp http://www.example.com:8080/myapp What I'm trying to do now is force all requests to myapp to be HTTPS, and then have those SSL requests follow the same proxy rules that strip out the port number as my application used to. Simply changing the ports 8080 to 8443 in the ProxyPass lines does not accomplish this. Unfortunately I'm not an expert in Apache, and my skills of trial and error are already reaching the end of the line. RewriteEngine On RewriteCond %{HTTPS} off RewriteRule myapp/* https://%{HTTP_HOST}%{REQUEST_URI} ProxyRequests Off <Proxy */myapp> Order deny,allow Allow from all </Proxy> SSLProxyEngine on ProxyPass /myapp https://www.example.com:8443/mloyalty ProxyPassReverse /myapp https://www.example.com:8433/mloyalty As this stands, a request to anything on the server other than /myapp load fine with http. If I make a browser http request to /mypp it then redirects to https:// www.example.com:8443/myapp , which is not the desired behavior. Links within the application then resolve to https:// www.example.com/myapp/linkedPage , which is desirable. Browser requests (http and https) to anything one level beyond just /myapp ie. /myapp/mycontext resolve to https:// www.example.com/myapp/mycontext without the port. I'm not sure what other information there is for me to give, but I think my goals should be clear.

  Read the article

• Amavisd-new(2.6.4-3) failing to do "lookup_sql_dsn" when large number of emails are need to be accessed

  - by sandip

  Amavis is failing to do sql lookup when large number of emails are sent to amavis. Its throwing out error after scanning 40 to 50 email. It shows error like. (!!)TROUBLE in process_request: sql exec: err=7, 57P01,DBD::Pg::st bind_param failed:FATAL: terminating connection due to administrator command\nSSL connection has been closed unexpectedly at (eval 103) line 164, <GEN50> line 5. at (eval 104) line 280, <GEN50> line 5. As soon as this error appears in the logs, Amavis stops and port 10024 is closed. Thinking it to an error due to ssl connection in the database(postgresql-8.4), i had stopped ssl in postgres, but it was of no use. I have tried to configure amavis on another server, but i got the same error again. This happening on a production server, So i am not being able to scan emails as per user settings. Anybody have any idea, what may be the source of this error ?? Please help. Thanks in advance

  Read the article

• tomcat vs FULL J2EE Solutions

  - by jrhickey

  We are getting ready to make a major revision in our Web Application architecture which currently is running on JBoss 4.2. At first we were looking at moving from 4.2 to JBoss 6 but after some research tomcat may be a better solution for us. My first question is their anything that JBoss can do that tomcat cannot do assuming you are using the correct plugins. We do not really use EJB's in our solution and it would appear there are simple plugins for web services, JMX and other features. Tomcat appears to have much better support, faster upgrade cycles and many, many books. Since there is less to the system it also seems much easier to support from an admin point of view. What am I missing? The main features we want to enable are better clustering support and session replication / persistence. We will consider other application servers as well such as Glassfish / Geronimo. quote form a web article: Apache Tomcat is the world’s most widely used web application server, with over one million downloads per month and over 70% penetration in the enterprise datacenter. Tomcat is used to power everything from simple one server sites to large enterprise networks.

  Read the article

• I have a perl script that is supposed to run indefinitely. It's being killed... how do I determine who or what kills it?

  - by John O

  I run the perl script in screen (I can log in and check debug output). Nothing in the logic of the script should be capable of killing it quite this dead. I'm one of only two people with access to the server, and the other guy swears that it isn't him (and we both have quite a bit of money riding on it continuing to run without a hitch). I have no reason to believe that some hacker has managed to get a shell or anything like that. I have very little reason to suspect the admins of the host operation (bandwidth/cpu-wise, this script is pretty lightweight). Screen continues to run, but at the end of the output of the perl script I see "Killed" and it has dropped back to a prompt. How do I go about testing what is whacking the damn thing? I've checked crontab, nothing in there that would kill random/non-random processes. Nothing in any of the log files gives any hint. It will run from 2 to 8 hours, it would seem (and on my mac at home, it will run well over 24 hours without a problem). The server is running Ubuntu version something or other, I can look that up if it matters.

  Read the article

• Finding the current user authenticated by basic auth (Apache)

  - by jtd

  When you log in through a basic auth page, is the username you authenticated as stored anywhere (on the server or client machine), maybe in an environment variable? Background: I have a common web administration page for an e-mail server and I'd like to know who is doing what. When a user successfully logs in via basic auth, I somehow want to be able to identify them and log their actions. So each time a request is submitted, I can write to a log file. The basic format would be: $username ran a $function against $useraccount so if a user changed someone's permissions, eg: Admin-Bob ran a permission change against User-Scott So if errors occur, I can easily trace back in the log file what actions lead to the cause. I tried checking the %ENV hash to no avail, any Ideas? I don't really want to get into PHP-like sessions, because that would mean scrapping my basic auth, which gives me a fine degree of control already. If I have to code something with sessions, I'd need to implement a system to block users after maximum tries and so on, which I don't really want to code. I think this is better geared towards serverfault because it pertains to Apache moreso than the programming language. Sessions can be done in a myriad of languages.

  Read the article

• Dovecot starting and running, but not listening on any port

  - by Dženis Macanovic

  Among others things I'm in charge of a Debian GNU/Linux (Wheezy) DomU for the mail services of the company i work for. Yesterday one HDD that was used for this particular server has died. After installing Debian again, Dovecot decided to no longer listen on any ports (checked with netstat -l). Other services (like Postfix and MySQL) work without problems. dovecot -n: # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-3-amd64 x86_64 Debian wheezy/sid ext3 auth_mechanisms = plain login disable_plaintext_auth = no first_valid_uid = 150 last_valid_uid = 150 mail_gid = mail mail_location = maildir:/var/vmail/%d/%n mail_uid = vmail namespace inbox { inbox = yes location = prefix = } pass db { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { group = mail mode = 0666 user = vmail } } service imap-login { inet_listener imaps { port = 993 ssl = yes } } service pop3-login { inet_listener pop3s { port = 995 ssl = yes } } ssl_cert = </etc/ssl/private/mail.crt ssl_key = </etc/ssl/private/mail.key userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } protocol imap { mail_max_userip_connections = 25 } UID 150 is vmail (I double checked file permissions). I didn't install Dovecot from source, but via apt from the official Debian US mirror. There are no messages concerning Dovecot in /var/log/syslog except for: Oct 21 06:36:29 server dovecot: master: Dovecot v2.1.7 starting up (core dumps disabled) Any ideas?

  Read the article

• Troubles with apache and virtual hosts

  - by xZero

  I have a BIG problem. I have VPS with Debian OS, and LAMP installed. Fresh install. For control panel i using Webmin. Now i trying to setup multiple sub-domains on my server using webmin for example: downloads.my-domain.com cpanel.my-domains.com forum.my-domains.com But problem what is happening is next, while i using no virtual hosts, everything works perfectly when i accessing it using my-domain.com, but when i add Virtual host, i cann access it but my-domain.com becomes unavilable because it redirects to virtual hosts i added. When i add more than 2 virtual hosts, problem is still here. Also, when i try to access to virtual server for example downloads.my-domain.com, it redirects again to cpanel.my-domains.com When i delete virtual hosts, access to my-domain.com is succesfull... What i known: - That is not problem with my domain provider. I correctly added subdomains and added host record to my VPS IP. - I added unique name to every single virtual host. - There are no two same virtual hosts - Every virtaul hosts have own directory: for example: downloads.my-domain.com have own WWW dir: /var/downloads Can somebody help me? Thanks.

  Read the article

• BackupExec 12 + RALUS - VERY slow backups

  - by LVDave

  We use Backup Exec 12 and the Remote Agent for Linux/Unix Servers (RALUS) to backup a large RHEL5 system. For various reasons we need to do a daily working set job. These working-set jobs run abysmally slow. The link between the target machine and the BE server is gigabit, and any other type of job runs 1-3GB/min. These working-set jobs start out at perhaps 40MB/min and over the course of the backup job slowly drops down so low that the BE job rate display in the "current jobs" goes blank.. Since we usually are only doing changed-files for one day, the job is usually small and finishes overnight and we don't worry abotu the slowness, but we had some issues with the backup server, and missed about 6 days of fairly heavy work on the Linux box, so this working-set job will be a doozy.. We have support with Symantec, and I've pestered them a lot about this, they've had me run RALUS in debug mode, sent them that log and a VXgather from the BE host and they had no fix/workaround.. To give an idea, I have the mentioned working-set job running for the last 3 1/2 hours and it's backed up just under 10MEGAbytes.... I'm posting this here to see if anybody in the "real world" has seen this/and/or has any ideas what might be causing these abysmally slow jobs, since Symantec seems to be clueless...

  Read the article

• PHP-FPM processes holding onto MongoDB connection states

  - by Brendan

  For the relevant part of our server stack, we're running: NGINX 1.2.3 PHP-FPM 5.3.10 with PECL mongo 1.2.12 MongoDB 2.0.7 CentOS 6.2 We're getting some strange, but predictable behavior when the MongoDB server goes away (crashes, gets killed, etc). Even with a try/catch block around the connection code, i.e: try { $mdb = new Mongo('mongodb://localhost:27017'); } catch (MongoConnectionException $e) { die( $e->getMessage() ); } $db = $mdb->selectDB('collection_name'); Depending on which PHP-FPM workers have connected to mongo already, the connection state is cached, causing further exceptions to go unhandled, because the $mdb connection handler can't be used. The troubling thing is that the try does not consistently fail for a considerable amount of time, up to 15 minutes later, when -- I assume -- the php-fpm processes die/respawn. Essentially, the behavior is that when you hit a worker that hasn't connected to mongo yet, you get the die message above, and when you connect to a worker that has, you get an unhandled exception from $mdb->selectDB('collection_name'); because catch does not run. When PHP is a single process, i.e. via Apache with mod_php, this behavior does not occur. Just for posterity, going back to Apache/mod_php is not an option for us at this time. Is there a way to fix this behavior? I don't want the connection state to be inconsistent between different php-fpm processes.

  Read the article

• Can I disable the message line when launching ``screen -RR``

  - by Jimm Chen

  screen -RR is great. It does one of the two thing automatically: If there is any detached screen session, it picks up one can attach to it. If there is no detached screen session(no session yet, or all have been attach to other terminal), it creates a new screen session automatically. I use Windows server Remote Desktop a lot, screen -RR behaves almost the same when a client connects to a remote desktop server. It is natural and I like it. However, when screen -RR determines it should create a new session, it displays a message line at terminal bottom for 5 second. I'd like to suppress this message line because it brings us little benefit. In my opinion, a remote user can always easily distinguish whether he is connected to a resumed session(a piled-up display) or a newly created session(a clean display) from what he sees in the terminal window. So, is there a way to suppress the nag "New screen..." ? Just suppress that very one, not suppress message line globally. My env: opensuse 11.3, GNU screen 4.00.03 (FAU) 23-Oct-06

  Read the article

• NGINX: How do I calculate an optimal no. of worker processes and worker connections?

  - by bodacious

  Our web app is running on a Linode 2048 server at the moment (~ 2048 GB of RAM) The MYSQL database is on another linode of it's own so this server is really only handling NGINX and and the Rails application. The application itself uses about 185976 of memory per instance (RSS). Our traffic is < 1000 per day and the pages are mostly cached so there are fewer hits to the rails app itself. My question is - how can I calculate optimal NGINX config settings for my app? Below is the current config: worker_processes 1; # pid of nginx master process pid /var/run/nginx.pid; events { worker_connections 1024; } http { access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; passenger_root /home/user/.rvm/gems/ree-1.8.7-2011.01@URTV/gems/passenger-3.0.3; passenger_ruby /home/user/.rvm/rubies/ree-1.8.7-2011.01/bin/ruby; include mime.types; default_type application/octet-stream; sendfile on; tcp_nopush on; tcp_nodelay on; # gzip settings gzip on; gzip_http_version 1.0; gzip_comp_level 2; gzip_vary on; gzip_proxied any; gzip_types text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript; # load extra modules from the vhosts directory include /opt/nginx/vhosts/*.conf; } Any advice would be appreciated! :)

  Read the article

• Help with routing table

  - by user68752

  I have tried to find the answer to my question but not really found a clean and easy solution. I have a box (Ubuntu headless 10.04.1 server, with one Ethernet port) on LAN behind a router (running m0n0wall), that I have successfully installed a PPTP device (ppp0) on, this is working flawlessly (following this link) The thing is I want this box to route all it's internet traffic through the VPN tunnel (ppp0 device) but also being able to access the local LAN on 192.168.1.* subnet. I've succeeded a bit with this, but my problem right now is that I have port forwards (e.g. SSH) done in the m0n0wall pointing to this specific box which forces me to do "add routes" to all boxes that want to access this machine through this specific port. For instance a machine with ip xyz.xyz.xyz.xyz needs to have a static route setup in the routing table on the box to be able to access the box. This is the result of route -n xxx.xxx.137.2 192.168.1.1 255.255.255.255 UGH 0 0 0 eth0 xxx.xxx.137.2 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 yyy.yyy.0.0 192.168.1.1 255.255.0.0 UG 0 0 0 eth0 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ppp0 Where xxx is the IPs provided from VPN server. yyy.yyy.0.0 is a net that i want to have access to the box, without this I can't access the box from outside the LAN (via port-forwards done in router software, m0n0wall) is there away round this ugly solution?

  Read the article

• IP Masquerade and forwarding

  - by poelinca

  Hi all , i got a dedicated server running ubuntu server 10.10 with 3 ip adresses on the same eth card ( example: eth0 192.168.0.1 , eth0:0 188.78.45.0 , eth0:1 ... ) with a 3 virtual machines running ( virtualization technologi used is lxc but i don't think this matters too much ) . Now i need to redirect all ports opened ( using ufw to close/open ports ) from the ip 188.78.54.0 ( eth0:0 ) to a virtual machine ip ( let's say for example 192.168.2.3 ) , all requests made by a virtual machine should be redirected back to the virtual machine that made the request ( in this example 192.168.2.3 ) . Lets say the second vm has the ip 192.168.2.4 now i need to redirect all opened ports to from eth0:1 to this ip and viceversa . And so on and so on , what are the iptables/ufw rules to get this done ? and where to save them ( witch config file ) so they stay the same after reboot . In a few words redirect all requests comming from/to eth0:0 to a certan ip , all requests comming from/to eth0:1 to another ip ... Remember i'm saying all ports opened becouse they might be dynamicly changed . p.s. please excuse my bad english

  Read the article

• How can I optimize my ajax calls to deliver at 60ms.

  - by Quintin Par

  I am building an autocomplete functionality for my site and the Google instant results are my benchmark. When I look at Google, the 50-60 ms response time baffle me. They look insane. In comparison here’s how mine looks like. To give you an idea my results are cached on the load balancer and served from a machine that has httpd slowstart and initcwnd fixed. My site is also behind cloudflare From a server side perspective I don’t think I can do anything more. Can someone help me take this 500 ms response time to 60ms? What more should I be doing to achieve Google level performance? Edit: People, you seemed to be angry that I did a comparison to Google and the question is very generic. Sorry about that. To rephrase: How can I bring down response time from 500 ms to 60 ms provided my server response time is just a fraction of ms. Assume the results are served from Nginx - Varnish with a cache hit. Here are some answers I would like to answer myself assume the response sizes remained more or less the same. Ensure results are http compressed Ensure SPDY if you are on https Ensure you have initcwnd set to 10 and disable slow start on linux machines. Etc. I don’t think I’ll end up with 60 ms at Google level but your collective expertise can help easily shave off a 100 ms and that’s a big win.

  Read the article

• Adventures in Drupal multisite config with mod_rewrite and clean urls

  - by moexu

  The university where I work is planning to offer Drupal hosting to staff/faculty who want a Drupal site. We've set up Drupal multisite with clean urls and it's mostly working except for some weird redirects. If you have two sites where one is a substring of the other then you'll randomly be redirected to the other site. I tracked the problem to how mod_rewrite does path matching, so with a config file like this: RewriteCond %{REQUEST_URI} ^/drupal RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ /drupal/index.php?q=$1 [last,qsappend] RewriteCond %{REQUEST_URI} ^/drupaltest RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ /drupaltest/index.php?q=$1 [last,qsappend] /drupaltest will match the /drupal line and all of the links on the /drupaltest page will be rewritten to point to /drupal. If you put the end of string character ($) at the end of each rewrite condition then it will always match on the correct site and the links will always be rewritten correctly. That breaks down as soon as a user logs in though because the query string is appended to the url so just the base url will no longer match. You can also fix the problem by ordering the sites in the config file so that the smallest substring will always be last. I suggested storing all of the sites in a table and then querying, sorting, and rewriting the config file every time a Drupal site is requested so that we could guarantee the order. The system administrator thought that was kludgy and didn't address the root problem. Disabling clean urls should also fix the problem but the users really want them so I'd prefer to keep them if possible. I think we could also fix it by using an .htaccess file in each site to handle the clean url rewriting but that also seems suboptimal since it will generate a higher load on the server and the server is intended to host the majority of the university's external facing web content. Is there some magic I can do with mod_rewrite to get it to work? Would another solution be better? Am I doing something the wrong way to begin with?

  Read the article

• REMOTE_USER not getting set?

  - by landed

  I am trying to setup LDAP Authentication in Joomla using a plugin called JMapMyLDAP (in fact 4 plugins each doing a different job). I need to pull a part of a string out of the server variable REMOTE_USER and this should be visible (we see here http://timplummer.com.au/4-how-to-integrate-joomla-3-with-active-directory-using-ldap.html) in phpinfo(); The issue is that REMOTE_USER is not set or at least not appearing. A few things to note (if you don't mind) here- conceptually I am not really understanding authentication as a whole subject it appears to be vast despite my years working in websites. Yes I used asp and built php pages to check a user is who they say they are with a token(/session?) that was given to just them and then they are identified when a stateless request is made to the server. Thats my level of understanding. This sounds different to the basic authentication in apache where a password sits in a file and a username and the user needs to login to a basic form to get access to the folder/docs this is via an .htaccess file. Ok so with the LDAP to work I need to get REMOTE_USER this sounds very reasonable as how else do we know is making the request. Thank you.

  Read the article

• Euro character messed up during FTP transfer

  - by djechelon

  My customer is using a very outdated ecommerce management system on my hosting service. For that product, no support is being provided anymore by the vendor. Brief explanation: the shop website, that claims to run under LAMP stack, is built by an old Visual Basic Windows application running on MS Access. The user constructs the shop, defines the HTML template, adds products and categories, etc. Then the VB exe builds the PHP pages (one for each template page) and the SQL script to run on MySQL. It also uploads everything via FTP and runs the installation/upgrade script on its own. The problem Browsing the website, many products' descriptions are cut before the euro sign. For example, what was supposed to be "Product price €1000" becomes "Product price" The analysis MySQL contains a cutted description until the € sign, so it's not PHP fault The Access databases contain full description with € sign, so it's not fault of the webmaster writing bad description or eDisplay cutting them The SQL that will run once the site gets uploaded, stored on my local machine before upload, contains the € sign The same script, after being FTPed by eDisplay and opened with nano from SSH, shows the € sign messed up like this: ^À vsftpd log reports (obfuscated for privacy) Sat Dec 15 11:16:57 2012 22 xxx.xxx.128.13 1112727 /srv/www/domains/xxxxxx.it/htdocs/db.sql b _ i r xxxxxxx ftp 0 * c which seems to be a binary transfer (and also a huge security vulnerability because you can download the whole database from unauthenticated HTTP) The eDisplay internal FTP client provides no option for ascii/binary transfer modes [Add] Trying to manually upload the SQL file via SFTP shows messing up euro [Add2] Trying to manually upload using Xftp client with explicit ASCII mode doesn't fix too It looks like the file gets uploaded as binary. Perhaps on the customer's previous host it all worked fine because that was a Windows host. The server It's an Azure virtual machine running openSUSE 12.2 with both vsftpd and openSSH The question Without asking the customer to manually upload files using FileZilla or replacing € with &euro;, because he refuses, what can I do on server side to prevent vsftpd to screw up euro sign?

  Read the article

• Scheduled Task unable to create/update any files

  - by East of Nowhere

  I have several tasks in Task Scheduler in Windows Server 2008 SP2 (32-bit) and they all successfully "do their work", except for creating or updating any files on Windows. All the tasks point to simple .cmd files that have the real work but beyond that there's no pattern: some call robocopy with the /LOG option, some call .exe files I wrote that manipulate XML files, some just do stuff with > redirection. With all of them, if I double-click the .cmd file myself, it works fine and the files are created or updated or whatever. If I run it from Task Scheduler (by the schedule or just clicking Run), the task always completes "successfully" but without any of the desired changes to files. I don't see any "unable to create file" errors in Event Viewer either. The tasks do all Run As a specific account, but I have logged in as that account and verified that it has permissions to do everything it needs to. Further details -- Task is set to Run whether user is logged in or not. Configured for: "Windows Vista or Windows Server 2008", there is no other Configured for option available.

  Read the article

• Setting up logging for a remote backup script

  - by Brian Dainis

  So I wrote up a short script that I am planning to run via a cron job daily to package up my site files and send them to a remote location. I also plan to incorporate DB dumps, but I have not gotten that far yet. My issue today however is that Im am uncertain how to log the output of each command for errors, warnings, or other pertinent information the command may output. I would also like to install sometype of fail safe so if something goes horribly wrong the script will stop dead in its tracks and notify me via email or something. Ok the email thing is not as critical, but would be nice. Does anybody have any ideas for that? Here is what I have so far. By the way, both servers are CentOS 6.2 running standard LAMP. #!/bin/sh ################################# ### Set Vars ################################# THEDATE=`date +%m%d%y%H%M` ################################# ### Create Archives ################################# tar -cf /root/backups/files/server_BAK_${THEDATE}.tar -C / var/www/vhosts gzip /root/backups/files/server_BAK_${THEDATE}.tar ################################# ### Send Data to Remote Server ################################# scp /root/backups/files/server_BAK_${THEDATE}.tar.gz user@host:/home/bak1/ftp/backups/ ################################# ### Remove Data from this Server ################################# rm -rf /root/backups/files/server_BAK_${THEDATE}.tar.gz

  Read the article

• .php file blank - .php5 files works

  - by Kleidi

  I have a problem with a server of mine. I've installed virtualmin/webin on it for administration and I have 1 domain on it. DNS management is external. On this domain I only have an html "Under Construction" index and 5 subdomains. In all those subdomains I have PHP systems running perfectly. I've tried to install Wordpress on the main domain and I'm having some issues: None .php files loads. I have made a phpinfo file on it to check it and it won't work either; only a blank page appears. When I check the source code of it in browser, appears the code. I have changed the extensions to .php5 and it worked perfectly. Something is going wrong with it but I can't figure out what. I have checked the apache error and nothing appears. 3 Days ago I upgraded from php 5.2.* to 5.4.21. Server is running CentOS 5.10.

  Read the article

• Migrating ODBC information through a batch file

  - by DeskSide

  I am a desktop support technician currently working on a large scale migration project across multiple sites. I am looking at a way to transfer ODBC entries from Windows XP to Windows 7. If anyone knows of a program or anything prebuilt that already does this, please redirect me. I've already looked but haven't found anything, so I'm trying to build my own. I know enough basic programming to read the work of others and monkey around with something that already exists, but not much else. I have come across a custom batch file written at one site that (among other things) exports ODBC information from the old computer and stores it on a server (labelled as y: through net use at the beginning of the file), then later transfers it from the server to a new computer. The pre-existing code is for Windows XP to XP migrations. Here are the pertinate bits of code: echo Exporting ODBC Information start /wait regedit.exe /e "y:\%username%\odbc.reg" HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBC.INI (and later on) echo Importing ODBC start /wait regedit /s "y:\%username%\odbc.reg" We are now migrating from Windows XP to 7, and this part of the batch file still seems to work for this particular site, where Oracle 8i and 10g are used. I'm looking to use my cut down version of this code at multiple sites, and I'm wondering if the same lines of code will still work for anything other than Oracle. Also, my research on this issue has shown that there are different locations in 64 bit operating systems for 32/64 bit entries, and I'm wondering what effect that would have on the code. Could I copy the same data to both parts of the registry, in hopes of catching everything? Any assistance would be appreciated. Thank you for your time.

  Read the article

< Previous Page | 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391  | Next Page >