Search Results

Search found 86974 results on 3479 pages for 'visualsvn server'.

Page 1388/3479 | < Previous Page | 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395  | Next Page >

• newbie: Allow domain users to change power-savings settings

  - by user65007

  I've just recently installed SMS 2011 on a server and added several computers to it's domain. Now I've noticed that I cannot change power settings (even when logged in as user who is in Domain Administrator role, let's call it Admin for future reference). After some googling I ended up adding Admin to the local administrators group using Group Policy Management Editor (as I have no experience in server administration I'm not sure I did it right: I went to Policy Management, selected Forest: xxxxx - Domains - xxxxx - Group Policy Objects - Windows SBS Client - Windows 7 and Windows Vista Policy - go to Settings tab on the right and right-click on anything and select Edit to go to Group Policy Mangement Editor - User Configuration - Preferences - Control Panel Settings - Local Users and Groups - right-click on it and select New - Local Group, then set Action to "Update", Group Name to "Administrators (built-in)", and added Admin to Members). After that I was able to change the power-savings settings on client computers(when logged in as Admin). Now the question: what should I do to allow any domain user to change this settings? Notice, I do not want to force some predefined power plan to all computers, I want to set it up so that any domain user on any client computer would be able to select a different power plan and to make any adjustments to the selected one. Thank you for any suggestions, just keep in mind that I'm newbie (but not completely dumb), so please answer accordingly :)

  Read the article

• Exchange 2007 issue internet receive connector

  - by user223779

  I have issue with yahoo.co.uk if I send a mail from within the yahoo webconsole the mail arrives in my inbox on the exchange server If I send mail from Iphone configure to send via mail box configure with yahoo setting mail is dropped. It is not the phone I can send perfectly fine to other exchange 2007 servers same service pack etc. if you look at the smtprec log below. this message sent from the phone you can see stops after 354 Start mail input; end with . ,<,EHLO nm26-vm7.bullet.mail.ir2.yahoo.com, ,,250-mail.marcocm.com Hello [212.82.97.49], ,,250-SIZE 10485760, ,,250-PIPELINING, ,,250-DSN, ,,250-ENHANCEDSTATUSCODES, ,,250-AUTH, ,,250-8BITMIME, ,,250-BINARYMIME, ,,250 CHUNKING, ,<,MAIL FROM:, ,*,08D13F3CADECA060;2014-06-04T11:26:50.898Z;1,receiving message ,,250 2.1.0 Sender OK, ,<,RCPT TO:, ,,250 2.1.5 Recipient OK, ,<,DATA, ,,354 Start mail input; end with ., ,+,, This is the message hitting the same server sent from yahoo webmail. ,"220 mail.marcocm.com Microsoft ESMTP MAIL Service ready at Wed, 4 Jun 2014 12:29:26 +0100", ,<,EHLO nm4-vm6.bullet.mail.ir2.yahoo.com, ,,250-mail.xxx.com Hello [212.82.96.104], ,,250-SIZE 10485760, ,,250-PIPELINING, ,,250-DSN, ,,250-ENHANCEDSTATUSCODES, ,,250-AUTH, ,,250-8BITMIME, ,,250-BINARYMIME, ,,250 CHUNKING, ,<,MAIL FROM:, ,*,08D13F3CADECA06B;2014-06-04T11:29:26.237Z;1,receiving message ,,250 2.1.0 Sender OK, ,<,RCPT TO:, ,,250 2.1.5 Recipient OK, ,<,DATA, ,,354 Start mail input; end with ., 2,,250 2.6.0 <[email protected] Queued mail for delivery, <,QUIT, ,,221 2.0.0 Service closing transmission channel, ,-,,Local ,+,, Any Thoughts how to fix this issue much appreciated.

  Read the article

• How to keep multiple servers in sync file wise?

  - by GForceSys

  I'm currently managing a cluster of PHP-FPM servers, all of which tend to get out of sync with each other. The application that I'm using on top of the app servers (Magento) allows for admins to modify various files on the system, but now that the site is in a clustered set up modifying a file only modifies it on a single instance (on one of the app servers) of the various machines in the cluster. Is there an open-source application for Linux that may allow me to keep all of these servers in sync? I have no problem with creating a small VM instance that can listen for changes from machines to sync. In theory, the perfect application would have small clients that run on each machine to be synced, which would talk to the master server which would then decide how/what to sync from each machine. I have already examined the possibilities of running a centralized file server, but unfortunately my app servers are spread out between EC2 and physical machines, which makes this unfeasible. As there are multiple app servers (some of which are dynamically created depending on the load of the site), simply setting up a rsync cron job is not efficient as the cron job would have to be modified on each machine to send files to every other machine in the cluster, and that would just be a whole bunch of unnecessary data transfers/ssh connections.

  Read the article

• Directories Throwing 404 Errors - Virtual Host Configuration and mod_rewrite

  - by nicorellius

  On my production server, things are fine: PHP extension removal and trailing slash rules are in place in my .htaccess file. But locally, this isn't working (well, partially, anyway). I'm running Apache2 with a virtual host for the site in question. I decided to not use the .htaccess file in this case and just add the rules to the httpd-vhosts.conf file instead, which, I've heard, if possible on your server, is a better way to go. The virtual host is working and the URL I use for my site is like this: devserver:9090 Here is my httpd-vhosts.conf file: NameVirtualHost *:9090 # for stuff other than this site <VirtualHost *:9090> ServerAdmin admin@localhost DocumentRoot "/opt/lampstack/apache2/htdocs" ServerName localhost </VirtualHost> # for site in question <VirtualHost *:9090> ServerAdmin admin@localhost DocumentRoot "/opt/lampstack/apache2/htdocs/devserver" ServerName devserver <Directory "/opt/lampstack/apache2/htdocs/devserver"> Options Indexes FollowSymLinks Includes AllowOverride None Order allow,deny Allow from all </Directory> <IfModule rewrite_module> RewriteEngine ON # remove PHP extension and add trailing slash # note - this doesn't work for directories, and throws 404 # TODO - fix so directories use index.php RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{THE_REQUEST} ^GET\ /[^?\s]+\.php RewriteRule (.*)\.php$ /$1/ [R=302,L] RewriteCond %{REQUEST_FILENAME} !-d RewriteRule (.*)/$ /$1.php [L] RewriteCond %{REQUEST_FILENAME}.php -f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule .*[^/]$ /$0/ [R=302,L] </IfModule> # error docs ErrorDocument 404 /errors/404.php </VirtualHost> The problem I'm facing is that when I go to directories on the site, I get a 404 error. So for example, this: devserver:9090/page.php goes to devserver:9090/page/ but going to a directory (that has an index.php): devserver:9090/dir/ throws 404 error page. If I type in devserver:9090/dir/index.php I get devserver:9090/dir/index/ and the contents I want appear... Can anyone help me with my rewrite rules?

  Read the article

• MySQL InnoDB/socket issue on Mac OS X 10.6.4

  - by user55217

  I have an ongoing issue on my Macbook Pro OS X 10.6.4. Intermittently, my MySQL install will not create a socket on startup. Rebooting sometimes, but not always, solves the problem. Deleting the ib* files in /usr/local/mysql/data and then restarting sometimes, but not always, solves the problem. My error logs tell me the following: Plugin InnoDB init function returned error Plugin InnoDB registration as a STORAGE ENGINE failed Can't start server: Bind on TCP/IP port: Address already in use Do you already have another mysqld server running on port: 3306? Aborting It then appears to attempt to start again and generates this error 20 - 30 times: Unable to lock ./ibdata1, error 35 Check that you do not already have another mysqld process using the same InnoDB data or log files Though the socket file is not created, I can connect to my MySQL db directly over localhost. Although, this does not help me from a PHP standpoint. Any thoughts on what I can do to resolve the issue or debug further? I'm at a loss as to where to go from here.

  Read the article

• Conflicts with file from package mysql-5.0.77

  - by Whiteyq

  I'm trying to install APC (Alternative PHP Cache) on a CentOs dedicated server. I've everything done apart from configuring phpize. Running :yum -y install php-devel gives me the following error file /usr/share/mysql/charsets/Index.xml from install of mysql-libs-5.1.57-1.el5.art.x86_64 conflicts with file from package mysql-5.0.77-4.el5_5.3.i386 etc etc for other languages So, i think the mysql version i have is too old & i more than likely need to upgrade mysql to version 5.1. Im reluctant to do this as a) its a live server (although only 3/4 domains) b) ive read ill read to recompile php if i upgrade To add to this i have plesk installed for managing domains & might need reinstalling/reconfiguring also. sorry for the long intro but its my first post & best to give as much info as possible, so my question is basically Is there any way i can run :yum -y install php-devel to get phpize working to complete installation of APC for the version of mysql i currently have installed? ie 5.0.77

  Read the article

• Set document root for external subdomain (A Record) via htaccess

  - by 1nsane

  I have a managed server (unable to control apache settings) with the default document root of: /var/www I have a web app running in: /var/www/subdomains/app/webroot I have a dedicated domain managed by the host that has the aforementioned webroot which works perfectly. I would like to allow externally provisioned domains to point to the server/web app via A Record config. If I access the site via IP, it takes me to the index located in /var/www. I would like to configure the .htaccess in my /var/www directory to rewrite requests from the external subdomain to the /var/www/subdomains/app/webroot directory. I've done so using the following rules: RewriteCond %{HTTP_HOST} external\.domain\.com$ [NC] RewriteRule ^(.*)$ /var/www/subdomains/app/webroot/index.php?url=$1 [L,QSA] When accessing external.domain.com, the app loads properly, but the paths to things like CSS files, images, etc. are prefixed with "/subdomains/app/", causing broken links. I've tried changing the RewriteBase (both in /var/www and /var/www/subdomains/app/webroot), as I believe that's what it's designed for - but no luck. Any ideas? FYI the app is built on CakePHP. Thanks

  Read the article

• Does cloud computing offer this? [closed]

  - by TheBlackBenzKid

  I have some newb questions I want answering please about cloud hosting - we are currently looking at Rackspace and getting a windows box. This is the situation: We have 15 computers in our office. We have 3 printers, some wifi and some network plugged. We have a standard router and the office share things via dropbox. The computers are not on Windows SBS or something similar. We want a cloud hosting solution that will offer User can login on any machine in the office and see the machine software User can login on any machine in the office and open Outlook and their emails and signature will be on exchange automatically A shared company folder on the network All printers automatically installed on the network Users can login remotely to access emails via the web At the moment we have a network company saying we need Xeon server in house with backup and psu and Windows SBS with license for each machine and also we need cabinets and cabling setup and also load balancers and modification of our DNS for emails. My question is this. Can cloud offer this? Can we have a server in the cloud that does this? Is it possible I mean the computers would be wireless connected to this cloud and you turn the machine on and its hosted?

  Read the article

• mod_wsgi -apache configuration file

  - by Kevin

  guys sorry I'm a newbie to this but I've been following the mod_wsgi configuration tutorial and it's very spotty. In my httpd.conf file I add the virtual host like so: 'Main' server configuration # The directives in this section set up the values used by the 'main' server, which responds to any requests that aren't handled by a definition. These values also provide defaults for any containers you may define later in the file. # All of these directives may appear inside containers, in which case these default settings will be overridden for the virtual host being defined. # ServerName wsgihost DocumentRoot "/Library/WebServer/Documents" <Directory "/Library/WebServer/Documents"> Order allow,deny Allow from all </Directory> WSGIScriptAlias /myapp /Users/KL/modwsgi/env/myapp.wsgi <Directory "/Users/KL/modwsgi/env"> <Files myapp.wsgi> Order allow,deny Allow from all </Files> </Directory> Now, when I also added in my local host the following: 127.0.1.1 wsgihost but I can't seem to connect. Am I doing something terribly wrong?

  Read the article

• Troubleshoot port forwarding. Could it be ISP blocking incoming connections?

  - by Gravy

  Had a new Axis IP camera delivered yesterday. Plugged into Cisco E2400 Wireless Router but having problems. Example topology: WAN IP: 10.10.10.10 (example) Cisco Router: 192.168.1.1 Axis Camera: 192.168.1.10:80 Port forwarding rules set up on router External Port: 999 Internal Port: 80 Protocol: TCP & UDP Device IP: 192.168.1.10:80 Enabled: True Trying to connect from within the lan to 192.168.1.1:80 from within browser - Works properly. Trying to connect from within the lan to 10:10:10:10:999 from within browser - Works properly. Trying to connect from outside the LAN (e.g. via 3g or another isp) to 10:10:10:10:999 from within browser - Doesnt work. I get the following errors from different machines / browsers: Safari could not open the page because the server stopped responding (IOS) The server at xx.xx.xx.xx is taking too long to respond. (firefox) This problem is not just for the Axis camera. I am also having similar problems connecting to my NAS drive. After using a web based port scanning tool, it appears as though port 999 is closed. Not certain why when I have set up port forwarding within the router. Any troubleshooting suggestions to help me determine whether the problem is with my Cisco settings / firewall or whether it could be my ISP blocking incoming connection requests? Many thanks

  Read the article

• WebSphere hung threads, how can I track then down?

  - by Puzzled

  We have an application running on WebSphere (unfortunately it is 6.1 which is no longer supported, it has not yet been migrated in production to a later version) which becomes entirely unresponsive because of hung threads. As far as I can tell we entirely exhaust one of the thread pools. I have activated hung thread detection and I get a core/thread dump when hung threads are detected. The server can run for several days without problems but has crashed twice this week. When load the core/thread dump in "IBM Thread and Monitor Dump Analyzer for Java", it tells me that there are a certain number of hung threads (this time it was 2, last time 11) and multiple (usually around 40) threads "waiting on condition" and some running threads. I believe one of the thread pool has around that size (50). Now what I see in there are threads waiting for locks, having locks or in wait. Most of them show a stack track which always ends like this: at java/lang/Object.wait(Native Method) at java/lang/Object.wait(Object.java:231) Now, how can I track this down to either a server configuration problem, application issue, WebSphere problem or something else? How is this supposed to help me track down the problem when almost everything in there refers to IBM code? I cannot ask IBM's help as 6.1 is now an unsupported version of WebSphere and while work has been done to make it work under WebSphere 7 we are not yet ready to switch to it in Production yet.

  Read the article

• Why can I not edit, delete directories inside of this directory

  - by user43053

  Hello there, First, I thought this was PHP related, but maybe it isn't. My original post, which may be irrelevant now is located at the bottom. The problem is I have a directory : /articles/. In it are 10 sub directories. I have been changing the permissions lately, but now it seems all the permissions of the parent folder, sub-folders and files are either chmod 755 or 777. I cannot move, delete or edit files inside of this parent directory or sub-directories with my FTP-client. I can however edit, delete, create new files and directories and change them with PHP-functions without problems. What may the problem be? OLD POST. Ignore everything below this line: If I create a directory with mkdir(), or create a file with fopen(), file_put_contents() or SimpleXMLElement::asXML(), I am unable to access the file with my FTP-client or c-Panel File Manager. If I try to delete or edit them, I get errors. Dreamweaver suggests it is a permission problem or a network or filesystem fault (but I've set the permissions with chmod() to 0777, and when I check the cPanel, it confirms chmod 777. I also tried to use fileowner() and the function returns int(99), the same owner as those files that I could access with my FTP-client. It seems files and directories created with PHP can only be modified or be deleted with PHP. I thought this must be a server setup related issue, so I write it here. I am on a shared server, and I have no idea about setting up servers. EDIT: It seems the problem is different. I cannot move files with FTP-client to the parent, or sub-directories either. This problem may not be PHP related, then. It seems the problem applies to any directory, regardless of whether it was created by PHP. EDIT 2: The parent directory has chmod 755. Thank you for your time. Kind regards Marius

  Read the article

• Strategy to isolate multiple nginx ssl apps with single domain via suburi's?

  - by icpu

  Warning: so far I have only learnt how to use nginx to serve apps with their own domain and server block. But I think its time to dive a little deeper. To mitigate the need for multiple SSL certificates or expensive wildcard certificates I would like to serve multiple apps (e.g. rails apps, php apps, node.js apps) from one nginx server_name. e.g. rooturl/railsapp rooturl/nodejsapp rooturl/phpshop rooturl/phpblog I am unsure on ideal strategy. Some examples I have seen and or thought about: Multiple location rules, this seems to cause conflicts between the individual app config requirements, e.g. differing rewrite and access requirements Isolated apps by backend internal port, is this possible? Each port routing to its own config? So config is isolated and can be bespoke to app requirements. Reverse proxy, I am little ignorant of how this works, is this what I need to research? is this actually 2 above? Help online seems to always proxy to another server e.g apache What is an effective way to isolate config requirements for apps served from a single domain via sub uris?

  Read the article

• Howto detect fake RAM

  - by Michael

  I just bought a virtual server which should have 2GB of RAM. Now i got a server with 4gb which looks very strange to me. I think it is just a virtual RAM. dmidecode only ouputs /dev/mem: Operation not permitted How can i check if it's a real RAM or just a virtual one? free -m outputs: total used free shared buffers cached Mem: 4093 364 3728 0 0 346 -/+ buffers/cache: 18 4074 Swap: 0 0 0 Output from cat /proc/user_beancounters Version: 2.5 uid resource held maxheld barrier limit failcnt 137: kmemsize 8922287 10194944 2145910784 2145910784 0 lockedpages 0 0 523904 523904 0 privvmpages 13387 59112 9223372036854775807 9223372036854775807 0 shmpages 769 785 9223372036854775807 9223372036854775807 0 dummy 0 0 9223372036854775807 9223372036854775807 0 numproc 22 54 9223372036854775807 9223372036854775807 0 physpages 93377 106010 0 1047808 0 vmguarpages 0 0 9223372036854775807 9223372036854775807 0 oomguarpages 2471 2473 9223372036854775807 9223372036854775807 0 numtcpsock 5 21 9223372036854775807 9223372036854775807 0 numflock 4 13 9223372036854775807 9223372036854775807 0 numpty 1 1 9223372036854775807 9223372036854775807 0 numsiginfo 0 39 9223372036854775807 9223372036854775807 0 tcpsndbuf 102592 381632 9223372036854775807 9223372036854775807 0 tcprcvbuf 81920 4820184 9223372036854775807 9223372036854775807 0 othersockbuf 4624 61632 9223372036854775807 9223372036854775807 0 dgramrcvbuf 0 9248 9223372036854775807 9223372036854775807 0 numothersock 39 56 9223372036854775807 9223372036854775807 0 dcachesize 4178917 4232732 1072955392 1072955392 0 numfile 378 535 9223372036854775807 9223372036854775807 0 dummy 0 0 9223372036854775807 9223372036854775807 0 dummy 0 0 9223372036854775807 9223372036854775807 0 dummy 0 0 9223372036854775807 9223372036854775807 0 numiptent 24 24 9223372036854775807 9223372036854775807 0

  Read the article

• Nginx and 1000 WordPress Installs - Optimization

  - by GTE

  Hey, I'm trying to create a rather unusual (imo) configuration where I have: nginx php-fastcgi mysql 1000 seperate WordPress installs (with WP Super Cache). Each WP install corresponds to a seperate subdomain. Furthermore, I have 1000 cron jobs being called every hour that in turn call a WP plugin (using wget) which retrieves data from an API and posts it to the respective blog. This is all being run on a virtual server with 1024MB of RAM, 4 shared processors, etc. The server is not doing well, especially during the times that the cron jobs are being executed. Nginx constantly throws 504 errors and the site has a significant lag. 1) Am I crazy for having 1000 individual WP installs? Should I be using WP-MU and will this help significantly? (I have certain plugin restrictions that I prefer having seperate installs but could switch if need be.) 2) Instead of having 1000 unique cron jobs - should be calling say a bash script that will then process the 1000 HTTP requests I need? Could this be done in a succesive order instead of a sequential one? 3) Any other kind of suggestion you may have for optimization? Should I be proxying to Apache instead of just using nginx, etc. Any kind of advice would be appreciated. Thanks in advance

  Read the article

• Request sent with version Http/0.9

  - by user143224

  I am using common-HttpClient ver 3.1. All my requests are having correct (default) Http version in the request line i.e Http/1.1 except fot 1 request. Following Post request gets the requestline as Http/0.9 server : port/cas/v1/tickets/TGT-1-sUqenNbqUzvkGSWW25lcbaJc0OEcJ6wg5DOj3XDMSwoIBf6s7i-cas-1 Body: service=* I debugged through the httpclient code and saw the requestline is set to http/1.1 but on the server i see the request coming as http/0.9. i tried to set the http version explicitly using the HttpMethodParams but does not help. Does someone has any idea what could be wrong? HttpClient client = new HttpClient(); HostConfiguration hc = client.getHostConfiguration(); hc.setHost(new URI(url, false)); PostMethod method = new PostMethod(); method.setURI(new URI(url, false)); method.getParams().setUriCharset("UTF-8"); method.getParams().setHttpElementCharset("UTF-8"); method.getParams().setContentCharset("UTF-8"); method.getParams().setVersion(HttpVersion.HTTP_1_1); method.addParameter("service", URLEncoder.encode(service, "UTF-8")); method.setPath(contextPath + "/tickets/" + tgt); String respBody = null; int statusCode = client.executeMethod(method); respBody = method.getResponseBodyAsString();

  Read the article

• Question marks showing in ls of directory. IO errors too.

  - by jaymoo

  Has anyone seen this before? I've got a raid 5 mounted on my server and for whatever reason it started showing this: jason@box2:/mnt/raid1/cra$ ls -alh ls: cannot access e6eacc985fea729b2d5bc74078632738: Input/output error ls: cannot access 257ad35ee0b12a714530c30dccf9210f: Input/output error total 0 drwxr-xr-x 5 root root 123 2009-08-19 16:33 . drwxr-xr-x 3 root root 16 2009-08-14 17:15 .. ?????????? ? ? ? ? ? 257ad35ee0b12a714530c30dccf9210f drwxr-xr-x 3 root root 57 2009-08-19 16:58 9c89a78e93ae6738e01136db9153361b ?????????? ? ? ? ? ? e6eacc985fea729b2d5bc74078632738 The md5 strings are actual directory names and not part of the error. The question marks are odd, and any directory with a question mark throws an io error when you attempt to use/delete/etc it. I was unable to umount the drive due to "busy". Rebooting the server "fixed" it but it was throwing some raid errors on shutdown. I have configured two raid 5 arrays and both started doing this on random files. Both are using the following config: mkfs.xfs -l size=128m -d agcount=32 mount -t xfs -o noatime,logbufs=8 Nothing too fancy, but part of an optimized config for this box. We're not partitioning the drives and that was suggested as a possible issue. Could this be the culprit?

  Read the article

• Very high Magento/Apache memory usage even without visitors (are we fooled by our hosting company?)

  - by MrDobalina

  I am no server guy and we have issues with our speed so I come here asking for advise. We have a VPS with 2 cores and 2gb of RAM at a Magento specialized hosting company. Over the course of the last weeks our site speed has gotten worse, even though our store is new, has less than 1000 SKUs and not even 100 visitos a day. At magespeedtest.com we only get 1.87 trans/sec @ 2.11 secs each with a mere 5 concurrent users. Our magento log files are clean, we have no huge database tables or anything like that. When we take a look at our server real time stats, we see that the memory usage jumped up from about 34% to 71% and now 82% in just a few days in idle, with no visitors on the site. Our hosting company said that we do not need to worry about that as it`s maybe related to mysql which creates buffers (which are maybe not even actually being used) and what is important is CPU and swap - stats are ok here. They also said that the low benchmark scores are caused by bad extensions or template modifications on our side. We are not sure if we can trust that statement as we only have 4 plugins installed (all from aheadworks and amasty which are known to be one of the best magento extension developers). Our template modifications are purely html and css, no modifications to the php code. Our pagespeed is ranked with 93/100 in firebug and Magento is properly configured, so the problem really just gets obvious when there are a handful of users on the site at the same time. Can anyone confirm our hosting`s statement about memory usage and where can I start looking for a solution?

  Read the article

• Using iptables to make a VPN router

  - by lost_in_the_sauce

  I am attempting to make a VPN connection to a third party VPN site, then forward traffic from my internal computers (ssh and ping for now) out to the VPN site using IPTables. 3rd Party <- (tun0/eth0)Linux VPN Box(eth1) <- Windows7TestBox I am running on CentOS 6.3 Linux and have two network connections eth0-public eth1-private. I am running vpnc-0.5.3-4 which is currently connecting to my destination. When I connect I am able to ping the destination IPAddresses but that is as far as I can get. ping -I tun0 10.1.33.26 success ping -I eth0 10.1.33.26 fail ping -I eth1 10.1.33.26 fail I have my private network Windows 7 test box set up to have the eth1 (private) network of my VPN Server as its gateway and can ping him fine. I need IPTables to send the Windows 7 traffic out the VPN tunnel. I have tried for a few days many different IPTables configurations from this site and others, either the other examples are too simple or overly complicated. The only thing this server is doing is connecting to the VPN and forwarding all traffic. So we can "flush" everything and start from scratch here. It is a blank slate. #!/bin/bash echo "Define variables" ipt="/sbin/iptables" echo "Zero out all counters" $ipt -Z $ipt -t nat -Z $ipt -t mangle -Z echo "Flush all active rules, delete all chains" $ipt -F $ipt -X $ipt -t nat -F $ipt -t nat -X $ipt -t mangle -F $ipt -t mangle -X $ipt -P INPUT ACCEPT $ipt -P FORWARD ACCEPT $ipt -P OUTPUT ACCEPT $ipt -t nat -A POSTROUTING -o tun0 -j MASQUERADE $ipt -A FORWARD -i eth1 -o eth0 -j ACCEPT $ipt -A FORWARD -i eth0 -o eth1 -j ACCEPT $ipt -A FORWARD -i eth0 -o tun0 -j ACCEPT $ipt -A FORWARD -i tun0 -o eth0 -j ACCEPT Again I have done many variations of the above and many other rules from other posts but haven't been able to move forward. It seems like such a simple task, and yet....

  Read the article

• Virtual hosting in lighttpd?

  - by lighttpdnewbie

  Ok, here it goes... I've seen some other posts dealing with this, but it didn't help that much. I am using windows XP. My problem is with trying to get lighttpd working with virtual hosts. Now, I managed to get everything up and working with the default /htdocs and the default page shows up just fine on the internet, but since I have several sites to host, I need virtual hosting. I managed to do it in apache, so I guessed it would work out just fine in lighttpd, but apparently I'm missing something. Ok, let's say I have domain (www.)example.org. I want everyone using that url going to the correct index.html, obviously. Let's say that index.html is in directory "websites/website1" placed under the lighttpd dir. (thus, the full path is c:/ProgramsFiles/lighttpd/websites/website1/index.html) Now: how, exactly, do I set up my virtual host (in the config file)? In detail, please, since I've tried for hours with the vague hints I got from fora and such, but it doesn't work. Also; is there something additional to do? Change the "server.bind" or get rid of the default server.document-root, or something? I appreciate all the help you can give! Especially if it's a verbatim/step-by-step solution you're offering! ;-p Edit: And, yes, my mod_simple_vhost has been enabled.

  Read the article

• Reasons for Ajax navigation breaking on Coldfusion/Apache when running an app in iOS fullscreen mode? [closed]

  - by frequent

  Not sure if this belongs to SO or here. I'm running a webApp using jquery, jquerymobile, requireJS and apache, coldfusion8, mysql 5.0.88 serverside. The app works fine until I try to run it in fullscreen mode on iOS (add icon to homescreen, launch app from there with <meta name="apple-mobile-web-app-capable" content="yes" /> specified). This meta tag will break the Jquery Mobile AJAX navigation. The AJAX request will fail and the requested page will be loaded as a new page, thereby restarting the app on every page change. I have chased this through the whole front end starting from requireJS through Jquery Mobiles AJAX navigation down to the AJAX request being made in Jquery. xhr.send( ( s.hasContent && s.data ) || null ); In regular browser this works no problem. In fullscreen mode, this fails (readystate=0, empty response). I have found this article, which argues that fullscreen mode is like a browser instance with different HTTP strings. On ASP.net this results in the browser not being identified by the server and only basic browser settings being assumed (e.g. no Javascript). I'm a little lost where to start looking for possible reasons serverside. I have not written any server code for handling Ajax page navigation, so this must be something that is handled out of the box by Coldfusion or Apache? Question: Where could I start looking for problable causes of fullscreen mode breaking AJAX navigation if I assume Coldfusion or Apache are the culprits? Is there a setting I'm missing in httpd.config? What else could be the problem? Thanks for inputs!

  Read the article

• DNS/Nameserver issue. Can't ping IP or domain

  - by Tar

  I get this when I ping an IP: 21:31:50.136623 IP SITE_IP > 173.194.33.4: ICMP echo request, id 14941, seq 1, length 64 21:31:51.136138 IP SITE_IP > 173.194.33.4: ICMP echo request, id 14941, seq 2, length 64 21:31:52.136118 IP SITE_IP > 173.194.33.4: ICMP echo request, id 14941, seq 3, length 64 21:31:53.136129 IP SITE_IP > 173.194.33.4: ICMP echo request, id 14941, seq 4, length 64 21:31:54.136102 IP SITE_IP > 173.194.33.4: ICMP echo request, id 14941, seq 5, length 64 21:31:55.136153 IP SITE_IP > 173.194.33.4: ICMP echo request, id 14941, seq 6, length 64 and when I ping a domain: 21:29:33.631583 IP 74.125.189.19.52085 > SITE_IP.domain: 28952 A? google.com.MY_DOMAIN. (42) 21:29:38.626553 IP SITE_IP.42280 > 8.8.4.4.domain: 52435+ A? google.com.MY_DOMAIN. (42) 21:29:38.652675 IP 74.125.189.22.63658 > SITE_IP.domain: 36178 A? google.com.MY_DOMAIN. (42) 21:29:43.631626 IP SITE_IP.48205 > 8.8.8.8.domain: 52435+ A? google.com.MY_DOMAIN. (42) The pinging of a domain is what worries me, because it looks like it is checking my DNS files for the resolution. Here is etc/resolv.conf nameserver 8.8.8.8 nameserver 8.8.4.4 /etc/hosts 127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 SITE_iP server.MY_DOMAIN.com server Will also add that I am seeing a number of 'SERVFAIL'.. I have no idea what could be causing this problem. If there is any other information I need to provide, let me know. I'm using CentOS.

  Read the article

• Looking for VCS wrapper that tracks system files changing across the whole *nix OS and sends diffs through email

  - by nextus

  I need some software that looks after custom directories across the whole OS (i.e. /etc) and alerting me if someone edit something file inside. Additionally, this tool must automatically commit and push changes into backup server, so I can easily determine when specific change in specific file was made. I'm using cvsbackup right now but I want to create or found something more modern. I think using git as VCS is a great idea. I could have local repository and easily revert changes in my configuration files. Furthermore, pushing changes to the remote repository would helps me to recover my configuration files when the server is fault. It doesn't seems difficult to write some wrapper around the git but there are a lot of problems. For example, I need to track custom directories: /usr/local/nginx/ and /etc/. So the destination point for my git repository is /. I don't need to track the other directories so I must to write overwhelming .gitignore rule: * !.gitignore !/etc/ !etc/* !/usr /usr/* !/usr/local /usr/local/* !/usr/local/nginx !/usr/local/nginx/* It's very daunting and prone to error. So it's maybe a good idea to create intermediate file that wrapper reads and converts to .gitignore format. Additionally, I don't want to keep my .git folder in / partition so I need to set appropriate GIT_DIR and GIT_WORK_TREE variables for git. Is there any ready to use tools for implementation this task? I don't found any but I don't believe that no one needs this feature.

  Read the article

• Debian boot problems

  - by psp

  I've got Debian server with one disk. No dual boot or anything fancy. Just Debian 6.0 (Squeeze). I rebooted the server today and now it doesn't boot. I get the following (from GRUB): error: hd0,msdos out of disk I then get a grub prompt grub rescue> I've been googling for ages with no luck. /etc/fstab > #/etc/fstab: static file system information. > # > # <file system> <mount point> <type> <options> <dump> <pass> > aufs / aufs rw 0 0 > tmpfs /tmp tmpfs nosuid,nodev 0 0 I've run debian rescue mode and looked through the syslog. I see hundreds of entries like this: Jun 30 22:51:08 kernel: [ 615.217382] sd 2:0:0:0: [sda] Unhandled error code Jun 30 22:51:08 kernel: [ 615.217385] sd 2:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK Jun 30 22:51:08 kernel: [ 615.217389] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 Jun 30 22:51:08 kernel: [ 615.217399] end_request: I/O error, dev sda, logical block 0 Jun 30 22:51:08 kernel: [ 615.217402] Buffer I/O error on device sda, logical block 0

  Read the article

• BYOD (accessing files) on a domain without joining?

  - by Philip White

  I run a Samba 4 instance at a small private school. This makes a regular Linux server appear as a directory controller. There are two relevant benefits to this: I have a Samba share for people's documents, and I use the Redirected Folders feature to allow any employee to sit down at any PC, log in with their domain credentials, and their My Documents points to network storage. Everyone has a mapped drive (using Group Policy Preferences) to a share specific to their account type. Students can access one share (one share for all students), teachers have another, and office staff have another. However, I would like to allow BYOD (Bring Your Own Device). Some employees are already asking for it with their personal laptops, and I know eventually most everyone will want to. Is there any way to replicate the two features above without having to join PCs to the domain? Joining personal PCs is impractical if only because only professional editions of Windows support this. Ideally, any operating system (including mobile) could access the relevant shares, but of course Windows is key. Offline caching is optional. (I could set up OpenVPN for teachers who want to access their files from home.) The problem with simply giving SSH access to the relevant shares is primarily that Samba 4 relies on ext4 ACLs and ext4 extended attributes to maintain NTFS permissions. Writing files directly to the Linux server would bypass this and would (probably) not be interoperable with Samba4. Right now I am completely flexible. I am even fine with scrapping the whole domain and using some other software for the two features above. How can I allow school employees and students freedom to securely share files without requiring everyone to have specific editions of Windows?

  Read the article

< Previous Page | 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395  | Next Page >