Search Results

Search found 56140 results on 2246 pages for 'super computer'.

Page 140/2246 | < Previous Page | 136 137 138 139 140 141 142 143 144 145 146 147  | Next Page >

• Is Gmail Being Blocked by my ISP (wait till you read this)?

  - by James

  This is the strangest thing I have ever encountered. I have a desktop on which I cannot access Gmail and also youtube sign in (I believe since youtube is owned by google they both use the same sign in system). So okay, maybe my ISP is blocking these for some reason or maybe my firewall is, or maybe there is something wrong with my connectivity, right? NO. On other computers that uses the same connection via a wireless router I can access both gmail and youtube sign in just fine. On this computer which doesn't have a wireless card and so I have to connect via Ethernet cable (connected to a USB converter since the Ethernet port doesn't work anymore) I can access all sites and services including things like aol and hotmail. But only when it comes to gmail, do I get complete and utter throttling. I even turned off my AV ad Firewall momentarily and no luck. The gmail ages starts to load and by mid point it just stays there loading and loading and loading... never ends. I tried everything, I reset the modem and router multiple times. I reinstalled my operating system from a vista to a windows 7 hoping a complete reinstall would solve the issue, but no luck. So can anyone for the life of them figure out why this could be? And yes, I am going to call my ISP but not to solve this issue, but to cancel them. I want to upgrade to cabel from DSL anyway. I didn't mention my ISP because I'm not sure if that is within the rules (if it's okay some one let me know and I will). P.S. All this happened one day, before gmail was perfectly accessible in this computer. I can't remember anything special that happened on that day prior to this. The only thing I can think of is, my ISP or Google itself is blocking this computer based on it's mac address, but I don't know if that's even done. Additional info: PC: Windows 7 Ultimate 32 bit Connection Type: DSL Connecting Medium: Ethernet cable via USB converter

  Read the article

• Why does Windows make random "device connect" and "device disconnect" sounds?

  - by Steve Elmer

  Hello, I've been noticing this since Windows Vista. I see it on Windows 7, now, as well. In any case throughout the day I notice that my computer makes apparently random device-connect and/or device-disconnect ("boink") sounds. I suppose it is the same sound you hear when connecting or disconnecting a USB device such as a thumb drive. I've noticed that this happens on each of three computers I work with at home, my wife's computer, and my machine at work. It happens without any user action at all - i.e. I'll be just sitting there (hands off my mouse and keyboard), and the computer will make the sound. There is no visual queue or anything. Just the sound. I have sometimes gone in pursuit of the sound - running virus scans, examining event logs and such, and observing task manager - but have never had any luck tracking this thing down, but have not had any luck. Surely someone else out there must be experiencing this, too. Any ideas? Thanks, Steve

  Read the article

• How to figure out what VirtualBox did?

  - by AndrejaKo

  I'm trying to boot a custom made-in-ASM OS on my recent laptop. The OS is intended to be installed on a floppy and during make creates a bootable floppy. Since I don't have a floppy drive, I installed it on a virtual floppy. After that I used WinToFlash's create bootable MS-DOS USB drive option to transfer the floppy image to an USB flash drive. Then I tried to boot my computer from it but got only a repeating broken string on screen. After all that I made a virtual hard disk image form the flash drive using this tutorial and tried to boot a virtual machine from it. First time I got same problem as on real computer. I then used the reset option and next time and every time after that OS booted correctly. My question is: How do I figure out what exactly happened to the virtual machine between first and second boot? UPDATE I just created a new VM with default settings for windows XP and it has the same problem that I have on a real computer. I was unable to reproduce the procedure which made the first VM work correctly.

  Read the article

• Wiring my internet

  - by u8sand

  I have Verizon internet service and am currently using wifi. My router is in the basement and my desktop computer is 2 floors and on the other side of the house above it... Worst possible positioning but that's just how things worked out. My wireless currently is extremely unstable so I've decide to correct the problem by wiring my computer directly. The problem lies here: when redoing the room next to it (when the wall was open) we went ahead and wired some coaxial cable from our attic to our basement (with plenty of slack on both ends, don't ask me why we didn't go ahead and wire a CAT6 cable). The question is: Can I use the coaxial cable to bring me internet connection? Naturally the router (which needs to stay where it is) takes a coaxial cable input and has Ethernet outputs. So maybe I would have to take a ethernet cable, convert to coaxial-coaxial to my computer, convert back to ethernet. Is this even possible to convert from coaxial to ethernet? Or do I have to attempt to go ahead and fish a cat6 cable through my house. I cannot just split the signal because that would require two routers and two networks (which I don't believe would work with one cable-one ISP correct me if I'm wrong). Thanks

  Read the article

• Arch Linux drops me on my school network

  - by Kravlin

  I'm running a Lenovo X61 which i carry around my college for getting on the internet at various points in the day. The network has always been finicky but recently it's gotten worse. I'll connect using iwconfig, get an ip from dhcpcd and log in using vpnc to their system. Sometimes I'll stay connected for hours but most of the time within 30 seconds my network traffic will drop to zero and i'll be unable to do anything. My computer still belives it's connected, however to try again i need to put my wireless interface down, put it back up and try again. It's gotten so bad that i've got a window on my computer pinging yahoo or google constantly in order to know if i'm still able to get online. I know other people who have used Arch Linux that don't have the same problems as well as people who use Ubuntu who haven't had any problems either. It seems like my computer is a special case. Does anyone have any suggestions on how to fix it? dmesg doesn't show anything out of the ordinary going on and i don't know where else to look for errors or other things to try. Edit: this doesn't happen on my home network. It's a problem that only happens at school.

  Read the article

• Setting MSN or Yahoo! Messenger status to Invisible or Offline when idle for an hour

  - by Jian Lin

  Where, or how, do I set it up in MSN Messenger or Yahoo! Messenger to automatically switch my status to either "Invisible" or "Offline" when idle for a half hour, or an hour? I know how to set my status as "Away" or "Busy" after 10 minutes, but can't seem to find a way to set the offline status options without manual intervention. Back story As a software developer, I am very used to turning the computer on for the whole day and not turning it back off. (For example, checking email for urgent fixes, fix issue and push to web server). It's not even turned off when heading to sleep in case I might find it hard to fall asleep and come back to check on the computer. Or to have it there ready in the morning to check that everything is okay. If I'm seen as being online for 24 hours of a day, some people see me as weird. Their perception of my value decreases as I'm always there (hard to get = high value; always there = low value). Leaving it on makes everyone in my contacts list think I have nothing better to do all day than sit in front of the computer. Even though it's my job and I do admittedly spend more time online than other people. That's why I'd like to find a way to set my status as Invisible or Offline.

  Read the article

• Why does Outlook 2007 lose connection to Exchange when Windows 7 64-bit turns off display?

  - by Greg R.

  The problem: When Windows 7 puts the display to sleep, Outlook 2007 and also Microsoft Office Communicator 2005 lose the connection to the Exchange server. When I unlock the computer, Outlook is logged out of Exchange and prompts me for credentials (although usually I have to restart Outlook to get it to reconnect). The network connection is still active, e.g. other applications don't lose their connection to the network or Internet when Windows 7 puts the display to sleep. I'm using a Dell E5400 notebook running Windows 7 Enterprise 64-bit with Outlook 2007 connecting to a corporate Exchange server (not sure if it's Exchange 2007 or 2010). The Dell is typically docked and connected via DVI (through the dock) to two Dell monitors. The Power Options in Windows 7 are set as follows: Turn Off The Display: 15 minutes Put The Computer To Sleep: never Those are the "Plugged In" settings but the problematic behavior is the same when running on battery. When Windows 7 turns off the display, it automatically locks the computer. E.g., I have to re-enter my credentials to access the machine. This is per corporate policy. The equivalent set up on my previous Dell notebook running Windows XP SP3 did not result in this problem with Outlook 2007 or Office Communicator 2005 connecting the very same exchange server. The problem began when I switched to the new Dell E5400 with Windows 7.

  Read the article

• Can I trick Carbonite into backing up an external hard drive?

  - by Brian

  I use Carbonite to back up my PC (Windows XP). We were running low on disk space on our home PC (down to 15 GB), so I went out and purchased an external hard drive. However, Carbonite will not back it up. Is it possible to set up Carbonite to backup an external hard drive? I just want the external drive to be extra disk space. From their FAQ: The current version of Carbonite backs up only the files that reside on permanent hard drives on your computer. It will not back up network drives, external drives, and NAS (network accessed storage) drives. If there are files on a remote drive that you wish to include in your Carbonite backup, you should copy the files to a folder on your local hard drive. If the files are on a shared network drive, you could install Carbonite on the computer on which the network shared drive physically exists, and back the files up directly from that computer. Check back soon for a Carbonite service plan that will allow you to back up your external drives.

  Read the article

• Cannot Access Local Network Shares (Strange Schannel and lsass.exe issues)

  - by Fake

  When I browse to my own computer's shares by going to \\MYCOMPUTERNAME\ ; I cannot access any of the shares on my LOCAL machine (nor can I access them remotely) and it generates about 40 of the following errors in my system event log: The following fatal alert was generated: 10. The internal error state is 1203. Details: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" /> <EventID>36888</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x8000000000000000</Keywords> <TimeCreated SystemTime="2011-04-05T13:52:09.144278900Z" /> <EventRecordID>79628</EventRecordID> <Correlation /> <Execution ProcessID="552" ThreadID="672" /> <Channel>System</Channel> <Computer>DEVELOP4.CONTOSO.COM</Computer> <Security UserID="S-1-5-18" /> </System> <EventData> <Data Name="AlertDesc">10</Data> <Data Name="ErrorState">1203</Data> </EventData> </Event> Additonal information: The process that is generating the error is lsass.exe OS: Windows7 Professional x64 Joined to Domain: Yes I was able to access the shares locally in the past I am having the same issue on 3 other computers that have similar configurations Any help would be greatly appreciated, because I have no idea what's wrong. Thanks!

  Read the article

• Windows 8 Pro Homegroup Not Allowing Access to Shared Files

  - by Jack Herr

  I have two pc's and a laptop. With all three running Windows 7, homegroup worked perfectly, with all computers able to access the files on the others exactly as one would expect. I installed Windows 8 Pro, which I downloaded recently from the MSDN website, on the laptop. From the info on the MSDN website, I believe the version downloaded is the official release version, not a release candidate. The install preserved all settings, apps, and files. I cannot connect to the homegroup from the laptop. Well, not exactly. I joined the homegroup during the install, and later left and rejoined, that was advertised as being offered by one of the pc's (not sure why that one was picked and not the other or both). This homegroup appears in my "computer" folder in the file explorer, offering files from that pc. But it excludes documents (only the music, pix, videos, and playlists folders on the one computer appear). I can actually access those files from the laptop. But the Homegroup folder, which actually shows all the computers by account and computer name and includes documents from both computers, does not open those folders when clicked. The computers listed by name in the Network folder give me a login that doesn't work. It asks for a username and password, no combinations of which work. Further, the following error message appears before the login is even attempted: "The system cannot contact a domain controller to service the authentication request. Please try again later." The two windows 7 pc's continue to share all files, including documents, seemlessly. I can also get to the laptop shared files, which I shared during setup, from either pc. Any ideas?

  Read the article

• Installing Numpy locally

  - by Néstor

  I posted this question originally on StackOverflow, but a user suggested I moved it here so here I go! I have an account in a remote computer without root permissions and I needed to install a local version of Python (the remote computer has a version of Python that is incompatible with some codes I have), Numpy and Scipy there. I've been trying to install numpy locally since yesterday, with no success. I successfully installed a local version of Python (2.7.3) in /home/myusername/.local/, so I access to this version of Python by doing /home/myusername/.local/bin/python. I tried two ways of installing Numpy: I downloaded the lastest stable version of Numpy from the official webpage, unpacked it, got into the unpacked folder and did: /home/myusername/.local/bin/python setup.py install --prefix=/home/myusername/.local. However, I get the following error, which is followed by a series of other errors (deriving from this one): gcc -pthread -shared build/temp.linux-x86_64-2.7/numpy/core/blasdot/_dotblas.o -L/usr/local/lib -Lbuild/temp.linux-x86_64-2.7 -lptf77blas -lptcblas -latlas -o build/lib.linux-x86_64-2.7/numpy/core/_dotblas.so /usr/bin/ld: /usr/local/lib/libptcblas.a(cblas_dptgemm.o): relocation R_X86_64_32 against `a local symbol' can not be used when making a shared object; recompile with -fPIC Not really knowing what this meant (except that the error apparently has to do with the LAPACK library), I just did the same command as above, but now putting LDFLAGS='-fPIC', as suggested by the error i.e., I did LDFLAGS="-fPIC" /home/myusername/.local/bin/python setup.py install --prefix=/home/myusername/.local. However, I got the same error (except that the prefix -fPIC was addeded after the gcc command above). I tried installing it using pip, i.e., doing /home/myusername/.local/bin/pip install numpy /after successfully instaling pip in my local path). However, I get the exact same error. I searched on the web, but none of the errors seemed to be similar to mine. My first guess is that this has to do with some piece of code that needs root permissions to be executed, or maybe with some problem with the version of the LAPACK libraries or with gcc (gcc version 4.1.2 is installed on the remote computer). Help, anyone?

  Read the article

• Dell Dimension 8400 Startup error

  - by Michael

  Hello all, thanks first for taking the time to read this and possibly help me...... now I am pretty decent of a computer tech...but not enough. I am having an issue with my computer which is running windows xp and as I mentioned it is a dell Dimension 8400. as soon as I power the system up the fan goes into hyper drive (spins like crazy and is very loud) then the start up screen with dell comes up and the loading bar gets stuck on the process of "Bios Revision A00" and never loads beyound that. I have read alot about it and think that the main problem was that it can not locate the file (which does have an updated version) I think it is A09. I can not enter safe mode, Bios mode or anything. I do have the file on my other computer and I was wondering if there is a way that I can use a usb flash drive (as I have read on other sites) to create a bootable MS-Dos diskette but I am failing at creating as such....is this possible? or is there anything else I can do? I tried to remove the battery from the system for about 10 minutes while it was completely unplug and tried then to reboot it and go into the bios menu but the same thing keeps happening....can anyone help me :-(

  Read the article

• Terrible noises from subwoofer of ACER Aspire 6930 with Realtek sound chip

  - by OneWorld

  After approximately 5-15 min of listening to music my subwoofer begins to make terrible noises. He's just "coughing". That began after 6 months I had this computer. Now I found out, that I can temporarily fix this problem by "restarting" the audio stream of the application that plays music. For example reloading last.fm page (reloads the flash file). Another way to reset the audio playback is switching the speaker configuration shown below in the screenshot. According to many posts on the internet like http://www.tomshardware.co.uk/forum/52918-20-acer-aspire-6935g-speaker-problem ACER support isn't any help Exchanging hardware doesn't fix the problem Even the later models have this problem Turning off the volume of the subwoofer is not an option to me. I still have warranty (I bought an extension of one year). I already tried about 15 versions of the Realtek driver with no success. I am not sure but MAYBE the problem did not occur on the original windows vista that was shipped with this computer. However, I removed the original windows for good reasons (english). What do you suggest me? Did anyone fix this problem? Maybe by writing a script which resets the audio streams every 5 minutes? Shall I take the effort to deal with the acer support until they give me another model? (I won't have a computer than for a longer time, will spend money on telephone hotlines (1,30 EUR / min)......) Here are additional infos, if they are any help: Windows 7 64 Bit (Original was Windows Vista Home Premium 32 Bit) All specs Audio driver version:

  Read the article

• Can I make my PC backup and then sleep on demand with WHS?

  - by Simon

  I really hate the way that WHS backs up at a particular time in the morning. First of all I don't EVER want my computer turning on when I am not there. EVER. I have a Core-i7 laptop which literally could burn the house down quite easily if it were to turn on in a bag. I also don't ever want my PC to sleep unless I tell it to. I don't have hibernation or sleep enabled and this is the only way that WHS will sleep after a backup is complete. I know that Windows 7 has the ability to disable waking up when on battery power but it doesn't seem to work on my laptop. These are the possibilities (with wake timers left as default): 'Wake this computer for backup' ON - it turns on in my bag if i forget to turn it off - and stays on when the backup is complete. 'Wake this computer for backup' OFF - it backs up in the morning, but I need to leave the machine on all night. I say 'Backup Now' and then it backs up immediately. I can turn it off when its done if I'm still awake, but then that backup appears as 'locked' in the console and not 'automatically managed'. What I'd really like to do is : Click 'Backup and Sleep' and then go to bed. It will backup immediately and then sleep the PC. This backup must be 'automatically managed' and not appear as a 'locked backup' in my console Show me a confirmation that everything was backed up successfully (or not) when I turn it on. Is there any way to achieve this?

  Read the article

• What are the requirements for Windows Remote Assistance over Teredo?

  - by Jens

  I try to get the Windows 7 (or Vista) remote assistance feature to work, without using UPnP on the novices computer. After enabling Teredo on the expert's computer (that is in a corporate network, and therefore has teredo disabled by default), I tried to connect to the novice both using Easy Connect and the invitation file with no success. My triubleshooting included the following (so far). A connection to the novice from my home pc was successful, hinting at a misconfiguration on the experts side. Both computers have a "qualified" connection to the Teredo Server. Both computers have a valid Teredo IP, access to the Global_ PNRP cloud and can resolve names registered with PNRP on the other computer. The expert can resolve the PNRP Id automatically generated with an Easy Connect help request Both computers can ping the other's PNRP name. Both computers can ping the other's Teredo IP Address using ping -6 Now, I am a little stumped. I expected Remote Assistance to work at this point, since my corporate firewall has no Teredo filtering. What could RA cause not to work in this setting? Thanks in advance!

  Read the article

• Possible boot conflict?

  - by Evan Kroske

  I was installing Ubuntu on a computer on which Windows XP was already installed. The computer has multiple hard drive bays, so I decided to remove the XP HDD and install Ubuntu on a blank HDD when it was the only HDD in the system. Unfortunately, if I now try to boot Ubuntu with the Windows XP drive in the second slot, nothing will boot. However, if Windows XP is in the first slot, it will boot fine. Can anybody explain why this happens? When I was checking out the BIOS to see if something was messed up, I discovered that when Ubuntu is in the first slot, the BIOS doesn't recognize any HDDs. However, if XP is in the first slot, the BIOS recognizes both drives. Any hypotheses about why this happens? Edit: Here's the setup. I have an old server with seven SCSI HDD slots. I have five identical 68 Gb SCSI drives, but I can keep only two plugged in. XP is still installed on the first drive, but I reinstalled Ubuntu on the second drive and had Grub overwrite the XP bootloader on the first drive. Now, the setup works fine, and I can use Grub to load either XP or Ubuntu. However, if I plug in another identical blank HDD in the third slot, the computer recognizes only the XP drive and doesn't boot. Grub starts to load, then gives me a "disk not found" error. Running ls from the grub rescue prompt only shows one drive with two partitions. I guess this is a BIOS problem, but I'd still like to know what triggers it. What about a blank drive could cause the BIOS to freak out?

  Read the article

• How to kill tasks in Windows 7 when even Task Manager won't open or respond?

  - by endolith

  Occasionally one of my computers will get so bogged down that everything locks up, Ctrl+Alt+Del doesn't work, Task Manager won't open, or they work, but are opening so slowly that it will take hours or days to shut down other processes and regain control of the computer, etc. Is there a way to, for instance, force Task Manager to be highest priority so it always opens immediately with Ctrl+Shift+Esc even when some other process/driver is hogging the CPU? Is there some other program that can run in the background and open immediately like this? This question isn't about fixing "underlying problems". No matter how much memory you have, it's still possible for a rogue process to eat it all up and lock up the computer in page fault thrashing, hog the CPU, etc. This question is about how to take back control of the computer when that happens. Basically when these kind of lock-ups happen, I want to open some kind of task manager that pauses every other process and allows me to kill one of them, and then let everything resume so I can save my work, etc. Otherwise my only option is to hold down the power button. Antifreeze is supposed to do exactly what i want, pausing all other applications and starting a task manager to kill the offender, but in my testing, it actually does neither.

  Read the article

• Client unable to access OWA website after temporarily changing SSL certificate on the server

  - by Lorenz Meyer

  I have the following issue: One client computer (Windows XP) cannot access the OWA website. All other client computers can (Except another one in the same remote office). How this happened: I temporarily changed the SSL certificate on the Exchange Server yesterday. After a few minutes, I reverted back, an now the same certificate that was installed for years is back again. During these few minutes, they were in OWA on this computer and got a certificate error. What exactly happens: Internet Explorer displays the error Internet Explorer cannot display the webpage, Firefox displays The connection was reset and Crome shows This webpage is not available. The connection to ... was interrupted. What I already did to try to get this working: Restart the client computer Restart the exchange server Deleted Internet Explorer browsing history In IE, Internet Options, tab Content, under Certificates deletes SSL cache Restored Internet Explorer to the default parameters I looked into certmgr.msc, but did not find a certificate related to the issue What could I do else to narrow down the origin of this problem (or better: resolve it) ? Can you give any advice ?

  Read the article

• Trouble in Team Viewer VPN Connection

  - by Sumit Pal

  I have completed initial vpn connection setup. It has connected. I have tested with ping and it is ok. My problem is, when I want to start file transfer in VPN it asks for username & password. So what is the user name? I have tried giving Computer-Name/User-Name. I have found my Computer Name by going to Control Panel/System/ & clicking 'Computer Name' tab & username from user accounts or it is shown when I login in windows account (Please correct me if the above procedure is wrong). But what is the password? I have tried giving the account password but it always give 'The username or password is incorrect.' My Question: How to find the username & password? For Information: a) I have Team Viewer 7 installed in one Windows XP PC & one Windows 8 PC. I like to create a secure connection between these two PCs. b) The two PCs are connected in the same local network via a router. Please ask if you need additional information.

  Read the article

• Why we can change our IP address?

  - by iamstupid

  I across some websites that offer change of our IP addresses. It says, we can surf net anonymously, including changing our IP address and location. Most of the softwares are not free, so I have not try it out yet. But my question is, so, IP addresses will no longer be unique or valid for identify which computer were sending/request the information? I though only the ISP can determine our IP, so we can change our IP from some commercial softwares huh? Case: If I change my IP address, I go to a website which is supposed to be banned by my country, will the ISP let me pass the check and I will be able to browse the website which should be blocked? another question: From what I know, if we want to go to certain website, here is the flow: My Computer = ISP = Website = ISP = My computer I am not sure, if its the correct flow, but I am sure that, whichever website I want to visit, I need to go through my ISP, isnt it?. So if we change out IP, our ISP will record our new IP or the original(assigned-by-ISP) IP? Sorry for my bad English.

  Read the article

• I'm looking for a program that can automate opening/closing a program

  - by Peterstone

  I am looking a for a program to remember things with these features: Open files or programs in my own computer at a planned time. For example I want every morming at 8:00 the program open a particular mp3 file. But suposse, by mistake, that I on my computer and 9:00, then I want that the program rememberme what I planned to open at 8:00. Show me the program as an active windows on my desktop. The windows of the program opened is what the user is seeing (Is at the first place in the desktop) and the rest of the program windows are below. Close programs or files in my own computer at a planned time. For example I want that the program mp3 file that was opened at 8:00 was closed at 10:00 if at that time still be opened. Detection of events. For instance If I open particular videogame program. then a mp3 file (with a recording message arguing why I shouldn´t continue playing that videogame at work time) is opened. Possibility of combine the features mentioned before each other.

  Read the article

• MacBook Air Keeps dropping Wi-Fi

  - by Robert Patrick

  So my MacBook Air keeps dropping Wi-Fi for some reason. It happens ONLY on my home network, and ONLY to my computer. I'm using a Linksys WRT54G router. I'm the only Mac on the network. Every other Wi-Fi network is perfectly fine, and every other computer on this network is fine. Many things can happen. It could say it's connected, but not be able to access the internet (whether it tells me that there's no internet access or not). It may just drop Wi-Fi altogether, and refuse to connect. Generally, if I unplug the router and plug it back in, it's all good. It also works if I restart my computer. This happens multiple times a day. Yesterday I did everything I know to get it to connect (restart router many times, restart my MacBook), and nothing worked. Eventually it just magically worked. How can I stop this from happening? We got a notice from Comcast a while ago saying that a bot called DNS Changer was detected on one or more machines on the network. I'm assuming that this can't be me, right?

  Read the article

• Boot sequence unlike reboot

  - by samgoody

  When I turn on the computer it acts very differently than when I reboot it. [WinXP Pro, Intel Core2 6600, 2.4GHZ, 2GB RAM, NVIDA GeForce] Boot: Monitor must be plugged into the motherboard or no image. Screen resolution 800x600. Changes to the resolution cause only the top half of the screen to be usable, and are lost when I shut down the computer. Desktop icons arranged in neat rows on left of desktop. Nothing of note in system tray In Device Manger - Display adapter: Intel(R) Q965/Q963 Express Chipset Family In Device Manger - Monitors, two monitors are listed Hibernate and standby work. Reboot: Monitor must be plugged into the graphics card or no image. Screen resolution - 1280x1024 Desktop icons arranged in the cute circle that I put them in. NVIDIA icon shows in system tray. In Device Manger - Display adapter: NVIDA GeForce 6200LE In Device Manger - Monitors, one monitor is listed Hibernate and standby do not work. When awakened after a hibernation it says: The system could not be restarted from its previous location because the restoration image is corrupt. Delete restoration data & proceed to system boot? Double reboot (inconsistent): Monitor must be plugged into the graphics card. Screen resolution - 1024x768 Odd icon shows in system tray whose tooltip says "Intel Graphics" For a while my morning ritual was to boot, wait, reboot using (alt+ctrl+del - ctrl+u - R), wait. Keeping the monitor plugged into the graphics card. But aside for the inefficiency of this method, I sometimes want to standby and can't. On the other hand, the computer is unusable when set to 800x600. Please help, anyone?

  Read the article

• Keyboard doesn't function after Fedora 17 update

  - by mickburkejnr

  I updated my Fedora 16 installation to Fedora 17 on Saturday, and the update worked without reporting any errors. I carried on working on the machine in question and then switched the computer off. Last night I went back on the computer, I switched it on and got to the log in screen. At this point I tried to type in my password but the keyboard wouldn't work. I unplugged it (it's a PS/2 keyboard) and plugged it back in. The lights flashed for a split second but the keyboard still wouldn't work. I then plugged the keybaord in to a USB to PS/2 adapter, and the keyboard still wouldn't work. I restarted the computer and tried to access the BIOS and I was able to do so. So the keyboard doesn't seem to be faulty, it just doesn't work when Fedora boots in to the GUI interface. I did try to boot in to the "recovery mode" of Fedora, and the keyboard works here with no problem. As I still have access to Fedora via a terminal interface, is there anything I can do to fix the keyboard problem via the terminal without having to reinstall Fedora?

  Read the article

• Ubuntu - No gnome-panels, no right-click, no internet, no hotkeys

  - by Darthfett

  Hey guys, I've been using Ubuntu (Maverick 10.10) on my desktop (ATI Radeon 5830) for about 3 weeks now, but all of a sudden I am unable to even use my computer. As soon as I start up, I see my desktop, with icons, but I don't see any gnome-panels, and I'm unable to get any options if I right-click. I can start programs by double clicking them. I also cannot get an internet connection. I've tried restarting gnome-panel by killing it, using Ctrl+Alt+5 to switch to a terminal (I don't have a shortcut to one on my desktop, and no hotkeys will work), but no luck. Restarting my computer has no effect upon this (I have to manually cut the power, since I don't know the terminal command). As far as I know, I have not made any changes, and I've never had any problems in the past. This started when I was playing Minecraft, but my internet crapped out, and no amount of re-trying the connection would work. I know it was my computer, as my brother's was working fine in the other room. Any clues as to what's going on? I'm more than willing to troubleshoot.

  Read the article

< Previous Page | 136 137 138 139 140 141 142 143 144 145 146 147  | Next Page >