Search Results

Search found 7381 results on 296 pages for 'debug'.

Page 141/296 | < Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >

  • Utilize two gateways on the same network same interface with load balancing

    - by RushPL
    My setup is two ISPs on a single interface and single network. I can either set my default gateway to 192.168.0.1 or 192.168.1.250 and either work. My desire is to utilize both of them with some load balancing. I have tried to follow the advice given in here http://serverfault.com/a/96586 #!/bin/sh ip route show table main | grep -Ev '^default' \ | while read ROUTE ; do ip route add table ISP1 $ROUTE done ip route add default via 192.168.1.250 table ISP1 ip route add default via 192.168.0.1 table ISP2 iptables -t mangle -A PREROUTING -j CONNMARK --restore-mark iptables -t mangle -A PREROUTING -m mark ! --mark 0 -j ACCEPT iptables -t mangle -A PREROUTING -j MARK --set-mark 10 iptables -t mangle -A PREROUTING -m statistic --mode random --probability 0.5 -j MARK --set-mark 20 iptables -t mangle -A PREROUTING -j CONNMARK --save-mark Now then I do "traceroute somehost" repeatedly I can only get route through my default route which is 192.168.1.250. Shouldn't the packets change routes in a random manner? How to debug it?

    Read the article

  • SSH not working after Restoring Running-Config to a Replacement Cisco Router

    - by Kyle Brandt
    One of my Cisco routers died over the weekend, Cisco sent the replacement and I restored the the config using copy tftp: running-config. Everything seems to work fine but I can no longer ssh into the router (I can telnet). The connection is refused, so it isn't listening on port 22 it seems like. I had previously backed up the config by just doing ssh router 'show run' > backup_config from my workstation. So: Is there anything wrong with my method of backup vs copy running-config tftp:? I know I haven't given any debug information, but is there something typical I need to do to get ssh working?

    Read the article

  • Install-SPSolution : This solution contains no resources scoped for a Web appli cation and cannot be deployed to a particular Web application

    - by Josh
    I have a PowerShell script that deploys about 12 web parts. They have all been created through Visual Studio 2010 and are being deployed to SharePoint 2010. I am getting the following error when running Install-SPSolution for one of my web parts: Install-SPSolution : This solution contains no resources scoped for a Web application and cannot be deployed to a particular Web application. Can someone help me debug this? Every other Install-SPSolution command uses -AllWebApplications, and I do not want to specify the web application directly using -URL. Here is the command that is breaking (this is the same command used to successfully deploy all 11 other web parts): Install-SPSolution –Identity PortalSelector.wsp -AllWebApplications -GACDeployment

    Read the article

  • 503 error Varnish cache when eAccelerator is started

    - by Netismine
    I have a Magento installation running on x-large Amazon server. I have Varnish, memcached and eAccelerator installed on the server. At first everything was working fine, but then at some point it stopped working, throwing 503 error with Varnish cache stamp below it. When I disable eaccelerator, error is gone and site is working. This is my eaccelerator config: extension="eaccelerator.so" eaccelerator.shm_size = "512" eaccelerator.cache_dir = "/var/cache/php-eaccelerator" eaccelerator.enable = "1" eaccelerator.optimizer = "1" eaccelerator.debug = 0 eaccelerator.log_file = "/var/log/httpd/eaccelerator_log" eaccelerator.name_space = "" eaccelerator.check_mtime = "1" eaccelerator.filter = "" eaccelerator.shm_ttl = "0" eaccelerator.shm_prune_period = "0" eaccelerator.shm_only = "0" eaccelerator.allowed_admin_path = "" any hints?

    Read the article

  • How to run sshfs through ssh command?

    - by Koryonik
    I tried to run sshfs through ssh in one command. For example, if I do : $ ssh user@host user@host$ sshfs host:/src /target Everything is ok. Now, if I tried this in one command : ssh -t "sshfs host:/src /target" But not mounted point. By using sshfs debug option, it seems volume is mounted and immediately unmounted when ssh connection ended. I also tried to run sshfs in a login shell, but result is the same when exiting shell : ssh -t "/bin/sh -l -c sshfs host:/src /target && /bin/sh" What's wrong ? Is there one another best way?

    Read the article

  • Shell script for replacing string in all PHP-files, for each user

    - by Mads Skjern
    Each user has some php-files using a shared database commondb. I want to iterate over all users (in users.csv), and in their home folder (e.g. /home/joe) find all php files recursively, and replace each occurrence of "commondb" with their own databasename, e.g. "joedb" for "joe". I have tried the following: #!/bin/bash # Execute like this: # bash localize.bash users.csv OLDIFS=$IFS IFS="," while read name dummy do echo $name find /home/${name} -name '*.php' -exec sed -i '' 's/commondb/${name}db/g' "{}" \; done < $1 IFS=$OLDIFS for users.csv joe, Joe J george, George G It does not fail, but the files are unchanged. I am quite weak in bash, and I can't figure out how to debug it :/ Can my script be fixed to work?

    Read the article

  • XAMPP Closes the Connection and won't let me download anything

    - by Miro Markarian
    I want my XAMPP Apache server to host a zip file (The file is around 250mb) but the server closes the connection and won't let me download the file! However webistes are loading correctly and It seems that the problem is with the extension Does xampp/apache have any file extension limit that they won't let me download .zip and .exe files? Also tested with a smaller .exe file , the problem is still present. It just doesn't let me download any file from the server.!!! Here is the file link to check: Test All I get in the error log is this: Fri Sep 07 23:21:31.742625 2012] [authz_core:debug] [pid 3664:tid 396] mod_authz_core.c(808): [client x.x.x.x:23409] AH01628: authorization result: granted (no directives), referer: http://ammiprox.tk/greeneyes2910/

    Read the article

  • Error headers: ap_headers_output_filter() after putting cache header in htaccess file

    - by Brad
    Receiving error: [debug] mod_headers.c(663): headers: ap_headers_output_filter() after I included this within the htaccess file: # 6 DAYS <FilesMatch "\.(ico|pdf|flv|jpg|jpeg|png|gif|js|css|swf)$"> Header set Cache-Control "max-age=518400, public" </FilesMatch> # 2 DAYS <FilesMatch "\.(xml|txt)$"> Header set Cache-Control "max-age=172800, public, must-revalidate" </FilesMatch> # 2 HOURS <FilesMatch "\.(html|htm)$"> Header set Cache-Control "max-age=7200, must-revalidate" </FilesMatch> Any help is appreciated as to what I could do to fix this?

    Read the article

  • Upgrading Fedora 16 to 17 with crypted LVM

    - by nijansen
    As the title suggests, I want to upgrade Fedora 16 to the Fedora 17 Alpha build, but I am struggling to do so because of my crypted HDD. To avoid the hustle of CD-ROM or USB install, I thought the preupgrade would be a good idea. It downloads the stuff, stores an image somewhere and creates an entry in my boot manager. When I choose to upgrade from the boot manager it crashes halfway through because it can not access any of the prepared files (because it's crypted) and hands me a debug console. Unfortunately, this case apparently is not covered by the Fedora troubleshooting advice, at least I was not able to find anything there. I would guess I have to mount my HDD manually, but 1) how? and 2) how do I resume the upgrade afterwards? I would really appreciate a push in the right direction.

    Read the article

  • How do I set "MaxPermSize" for Atlassian Fisheye/Crucible running as service on Win2k3?

    - by Jeremy
    I have been trying to setup Atlassian Fisheye/Crucible as a service on Win 2K3 R2 for two weeks. I keep getting various "java.lang.OutOfMemoryError: PermGen space" errors, which crash Fisheye and force me to restart the service. I've followed the example on the Atlassian support site to configure MaxPermSize within the service wrapper. However, when I check SysInfo inside the Fisheye Admin pages and the debug log, I don't see any confirmation. The Java Heap info is in both places, so I'd expect the MaxPermSize setting to show up in both places. The error is persisting and Atlassian support has been little help. I appreciate any help.

    Read the article

  • capture nimbuzz traffic

    - by lurscher
    I need to capture all the traffic, specially during login, between nimbuzz pc client and nimbuzz server. The reason is that i need to debug outgoing packets at login that mark the user visibility status in order to reproduce them in a in-house XMPP client application I've tried doing this with wireshark, but i seem to be pretty helpless with this tool. Also, the packets i've been able to see are all before the SASL negotiation happens, after that, i cannot see the xml packets being exchanged any help for how to achieve this task is greatly appreciated (preferably on Windows, since there is no nimbuzz client for linux, in any case i can install one in a VM and monitor the traffic between the VM instance in the linux host)

    Read the article

  • How to tell if OpenGL is really working in Ubuntu 10.04

    - by Jonathan
    I have a lenovo S9e running Intel integrated graphics. Here is my lspci output related to the graphics: 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) Subsystem: Lenovo Device 3870 Flags: bus master, fast devsel, latency 0 Memory at f0580000 (32-bit, non-prefetchable) [size=512K] Capabilities: [d0] Power Management version 2 I want to know how I can make sure OpenGL support is running in full on an Ubuntu 10.04 installation. I have a few hints to think that it is not: The "Desktop Effects" will not load Apps such as stardock, when attempting to use OpenGL rendering, will display black boxes instead of transparency In the games Pioneers, the number-tile icons are suspiciously just black circles Windows games running with Wine will only support software rendering, not hardware rendering When I boot into a Knoppix LiveCD, the desktop effects do work, splendidly, meaning compiz detects my computer as capable. My problem with troubleshooting is that Canonical has basically eliminated the conf-file-based mechanism of X11 as far as I can tell, thus making it even harder to ensure graphics modules are loading properly. How do I debug and test OpenGL on m Ubuntu 10.04 installation?

    Read the article

  • Debugging Connection Issues Between Two Linux Servers

    - by clickfault
    I have two CentOS 5 servers running iptables and apf. I am having issues connecting with ssh from server 1 to server 2. I can connect from server 1 to a third server and from that third server to both 1 and 2. In all cases I am using the IP address and not a host name. I have stopped iptables and apf on all servers and it doesn't seem to change anything. What is the best way to debug this process?

    Read the article

  • PHP Script causing high CPU

    - by user20996
    I have a website which is causing me a major headache. There is one PHP script which is using far to much CPU, this only seem to happen when bots hit the site, I dont want to block all the bots because we need them. I have the the process manager output: Pid Owner Priority CPU % Memory % Command 16943 (Trace) (Kill) specialone 0 99.4 1.0 /usr/bin/php /var/www/specialone/page.php I ran strace -p 16943 on the process but it comes up with nothing. We have 2GB of RAM and the php memory_limit is set to 128M which should be enough. The trouble I have is the PHP code is a Framework and the culprit page.php pulls in a lot of other PHP files so I cant debug the PHP. Is there any way of finding out what the script is doing when its using so much CPU which will help me solve it?

    Read the article

  • Tomcat startup.sh doesn't work

    - by OMG Ponies
    I've just installed Tomcat 6.0.20 (per Jira documentation recommendation) on RedHat EL 5 Server, and attempts to use: bin] # ./startup.sh ...result in: Using CATALINA_BASE: /opt/software/jira-tomcat-6.0.20 Using CATALINA_HOME: /opt/software/jira-tomcat-6.0.20 Using CATALINA_TMPDIR: /opt/software/jira-tomcat-6.0.20/temp Using JRE_HOME: /etc/alternatives/jre Usage: catalina.sh ( commands ... ) commands: debug Start Catalina in a debugger ... version What version of tomcat are you running? I've edited the catalina.sh file to add: echo $0 echo $1 ...and I see: catalina.sh start ...etc when I use: ./catalina.sh start Why does catalina.sh not use the parameter?

    Read the article

  • Macro is not Cooperating with Quotations in Excel VBA

    - by B-Ballerl
    I Have a macro containing a line that will change the formula of a cell using R1C1 formula type. The formula is: ActiveCell.FormulaR1C1 = _ "=IF(R[0]C[-2]=0,"",(R[0]C[-20]-R[0]C[-16]))" When ever I attempt to run the macro it always comes up with a dialog box saying Run-time error '1004': Application-defined or object-defined error. And when you click debug it highlights those 2 lines in the macro. And I can't figure out how to fix it. Can anyone help?

    Read the article

  • VSTS2010 crashes on opening the team explorer->My queries node

    - by vstsuser
    VSTS2010 crashes on opening the team explorer-My queries node this does not repeat if MSN office communicator (2007 R2 version) is exited. the issue occurs only if MSN office communicator is up and running. (no issues reported by communicator though) Any help in this regard? Debug log: Unable to cast COM object of type 'CommunicatorAPI.MessengerClass' to interface type 'MessengerAPI.IMessenger2'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{....}' failed due to the following error: Error loading type library/DLL. (Exception from HRESULT: 0x80029C4A (TYPE_E_CANTLOADLIBRARY)). Windows event log EventType clr20r3, P1 devenv.exe, P2 10.0.30319.1, P3 4ba1fab3, P4 microsoft.teamfoundation.collaboration.microsoft, P5 10.0.0.0, P6 4c7d8ce4, P7 49, P8 0, P9 system.invalidcastexception, P10 NIL.

    Read the article

  • 504 Gateway Time-out after php fatal error

    - by tiagojsag
    I'm using nginx and php-fpm to develop a symfony2 based website, under ubuntu 12.10 (yes, I know I'm using a beta OS). Everything was working out fine until, due to an error on my code, I called an unexisting function, and got the following: Fatal error: Call to a member function (....) This isn't a problem (it's a bug in my code, easily fixable), but after this, no other page loads. My browser just keeps trying to load the page from the webserver, until nginx timeouts (after +- 30s, which should be some default timeout) and returns: 504 Gateway Time-out Restarting php-fpm solves the issue. Nginx logs show a timeout message, and nothing appears on php-fpm logs, even if I set them to debug level. I tried switching from fpm to fastcgi, and the same thing happens. I've looked around, but all similar error are related to big requests/file handling, which isn't the case. All the pages on my website load in a few seconds, even under development conditions (no caching, etc).

    Read the article

  • Ubuntu: move logs from /dev/tty8 to different terminal /dev/tty12 or get rid of it.

    - by Casual Coder
    I want to know how to move or get rid of /dev/tty8 log output in Ubuntu 9.10. /dev/tty7 is my regular X session. When I am switching user to test account where I can try and test setups and configs I am at next available console i.e. /dev/tty9 because /dev/tty8 is taken by log output. Where can I configure this ? All I've found related to /dev/tty8 is commented lines in /etc/rsyslog.d/50-default.conf. I changed it like that: daemon,mail.*;\ news.=crit;news.=err;news.=notice;\ *.=debug;*.=info;\ *.=notice;*.=warn /dev/tty12 And I've got nice log output on /dev/tty12 but where is configuration for log output on /dev/tty8. How can I change it?

    Read the article

  • Client can't reach my production webserver. It's their ISP's fault, but now what?

    - by MikeN
    I have a customer in Michigan who can't access my production SaaS webserver that is hosted on Slicehost. All other companies across the US/Canada/Europe have no problem reaching the site. This problem is occuring intermittantly, and Slicehost customer service says it's a problem with the client's ISP. I got the IP address of my client, and ping'ing that IP address from my PROD server fails, but ping'ing the IP address from my dev box or our seperate blog server (also hosted on slicehost) works. How do I debug a problem like this? I asked the client to reach out to their local ISP and ask about this problem. A traceroute shows that the packets are getting stopped on a Comcast Michigan node which is the client's ISP. Is there anything I can do additionally to fix this problem for my client?

    Read the article

  • http server connectivity puzzle

    - by jpmartins
    I have been seeing some strange connection issue in the production environment. The setup has two IBM Http Server's (IHS) and a network IP load-balancer in front of them (round-robin). One instance the system is working fine, the next requests stop arriving at the IHS. Telnet directly to port 80 of the IHS is established sucessfully, but connection to the port 80 through the IP of the load-balancer fails! The puzzle comes next, the network admins say the load-balancer is working fine. When we finally reboot the IHS servers and request start flowing... The situation happened three times the last month and no obvious pattern was found. Any debug ideas?

    Read the article

  • Vagrant is creating files and folders in my project

    - by SERPRO
    Recently I updated Vagrant (v 1.6.3) and I noticed that in the folder of my project there are some new folders and files like: d20140610-11944-1j6n1cz/ d20140610-15421-1pkz3t8/ vagrant20140610-11944-p76ezc vagrant20140610-11944-p76ezc2 vagrant20140610-11944-yt3bhz vagrant20140610-11944-yt3bhz1 vagrant20140610-15421-mfqrig vagrant20140610-15421-mfqrig1 vagrant20140610-15421-y3r71a vagrant20140610-15421-y3r71a2 vagrant20140610-15421-y3r71a2.lock most of the files are empty, others have text like this: source "https://rubygems.org" source "http://gems.hashicorp.com" gem "vagrant", "= 1.6.3" group :plugins do gem "vagrant-login", nil, {} gem "vagrant-share", nil, {} end The directories have a file named config with this this info: BUNDLE_PATH: "/home/user/.vagrant.d/gems" Is this some kind of debug option? how can I disable it?

    Read the article

  • Is there a way i can see why Squid (Proxy Server) determines why a resources should be a MISS?

    - by Pure.Krome
    Hi folks, I'm using Fiddler/FireBug to debug some of our live server web content. We're getting a lot of :- X-Cache: MISS from X-Cache-Lookup: MISS from :8080 Via: 1.1 :8080 (squid/2.7.STABE3) I thought i knew a lot about cache-control / expires / last-modified / etags, etc.. but maybe not. So .. is there a way I can run squid in some verbose way to see why it thinks a resource which i request, is cached/is not getting cached, etc.. which is why we're getting MISSes back? cheers :)

    Read the article

  • Website visitors are still being redirected after "fixing" the damage from a conditional redirect website attack

    - by Shannon
    BACKGROUND A website of mine was recently the target of a conditional redirect attack. PHP code was added to my pages to redirect visitors. The .htaccess file was edited to redirect visitors. I've re-uploaded my website so the compromised PHP and .htaccess code have both been removed. My site is mostly handwritten php and static HTML content. I don't use page comments or any third party libraries. THE PROBLEM After removing the compromised php and htaccess files, visitors are still being re-directed. What could be the reason that visitors are still being redirected? Are there any tools to check where/how redirects are taking place so I can debug the problem? UPDATE - PROBLEM FIXED As suggested in the comments, I cleared my Firefox cache and that fixed the problem (for me anyway). Visitors with old cache data will obviously still be re-directed.

    Read the article

  • How to access remotly to a mysql server?

    - by ÉricP
    Hi, I'm trying to access my remote mysql server from my own computer. I uncommented: bind-address = 80.10.65.45 I added 80.10.65.45 as a server in privilege root 80.10.65.45 yes ALL PRIVILEGES yes I'm using Sequel Pro on MacosX to connect via SSH here is the debug log: debug1: Authentication succeeded (password). debug1: Local connections to LOCALHOST:58517 forwarded to remote address 127.0.0.1:3306 debug1: Local forwarding listening on ::1 port 58517. debug1: channel 0: new [port listener] debug1: Local forwarding listening on 127.0.0.1 port 58517. debug1: channel 1: new [port listener] debug1: Entering interactive session. debug1: Connection to port 58517 forwarding to 127.0.0.1 port 3306 requested. debug1: channel 2: new [direct-tcpip] channel 2: open failed: connect failed: Connection refused debug1: channel 2: free: direct-tcpip: listening port 58517 for 127.0.0.1 port 3306, connect from 127.0.0.1 port 58519, nchannels 3

    Read the article

< Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >