Search Results

Search found 7875 results on 315 pages for 'wired networking'.

Page 144/315 | < Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >

• How can I switch from a custom linux network namespace back to the default one?

  - by Martin

  With ip netns exec you can execute a command in a custom network namespace - but is there also a way to execute a command in the default namespace? For example, after executing these two commands: sudo ip netns add test_ns sudo ip netns exec test_ns bash How can the newly created bash execute programs in the default network namespace? There is no ip netns exec default or anything similar as far as I've found. My scenario is: I want to run a SSH server in a separate network namespace (to keep the rest of the system unaware of the network connection, as the system is used for network testing), but want to be able to execute programs in the default network namespace via the SSH connection. What I've found out so far: Created network namespaces are listed as files under /var/run/netns (but there is no file for the default namespace) The ip netns exec code can be found here: http://git.kernel.org/cgit/linux/kernel/git/shemminger/iproute2.git/tree/ip/ipnetns.c#n132 - I haven't grasped everything that it is doing yet, but it doesn't look very promising. ip netns identify $$ as suggested by Howto query and change network namespace on linux? returns nothing when in the default network namespace

  Read the article

• Assign fixed IP address via DHCP by DNS lookup

  - by Janoszen

  Preface I'm building a virtualization environment with Ubuntu 14.04 and LXC. I don't want to write my own template since the upgrade from 12.04 to 14.04 has shown that backwards compatibility is not guaranteed. Therefore I'm deploying my virtual machines via lxc-create, using the default Ubuntu template. The DNS for the servers is provided by Amazon Route 53, so no local DNS server is needed. I also use Puppet to configure my servers, so I want to keep the manual effort on the deployment minimal. Now, the default Ubuntu template assigns IP addresses via DHCP. Therefore, I need a local DHCP server to assign IP addresses to the nodes, so I can SSH into them and get Puppet running. Since Puppet requires a proper DNS setup, assigning temporary IP addresses is not an option, the client needs to get the right hostname and IP address from the start. Question What DHCP server do I use and how do I get it to assign the IP address based only on the host-name DHCP option by performing a DNS lookup on that very host name? What I've tried I tried to make it work using the ISC DHCP server, however, the manual clearly states: Please be aware that only the dhcp-client-identifier option and the hardware address can be used to match a host declaration, or the host-identifier option parameter for DHCPv6 servers. For example, it is not possible to match a host declaration to a host-name option. This is because the host-name option cannot be guaranteed to be unique for any given client, whereas both the hardware address and dhcp-client-identifier option are at least theoretically guaranteed to be unique to a given client. I also tried to create a class that matches the hostname like this: class "my-client-name" { match if option host-name = "my-client-name"; fixed-address my-client-name.my-domain.com; } Unfortunately the fixed-address option is not allowed in class statements. I can replace it with a 1-size pool, which works as expected: subnet 10.103.0.0 netmask 255.255.0.0 { option routers 10.103.1.1; class "my-client-name" { match if option host-name = "my-client-name"; } pool { allow members of "my-client-name"; range 10.103.1.2 10.103.1.2; } } However, this would require me to administer the IP addresses in two places (Amazon Route53 and the DHCP server), which I would prefer not to do. About security Since this is only used in the bootstrapping phase on an internal network and is then replaced by a static network configuration by Puppet, this shouldn't be an issue from a security standpoint. I am, however, aware that the virtual machine bootstraps with "ubuntu:ubuntu" credentials, which I intend to fix once this is running.

  Read the article

• Prevent users from Router 2 seeing Router 1 computers

  - by Patrick Robert Shea O'Connor

  I've got 2 Netgear N300 (WNR2000v3) routers. Here's my setup: Modem Router 1 Private Users/Router 2 Public Wireless Users on "Guest" Network. I want to prevent users who are connected to Router 2's "Guest" network from accessing anything that is connected to Router 1. There is an option when setting up the "Guest" network called "Allow guest to access My Local Network" which I thought if unchecked would do this very thing; however, I can still access files and such of computers connected to Router 1. Router 1 assigns 192.0.0.x IP addresses, Router 2 assigns 10.0.0.x IP addresses, how can they even see each other? Do I need to change the subnet or something else?

  Read the article

• Doing port forwarding and then using it from within the internal network

  - by Ram Rachum

  We all know that by doing port forwarding on the router, computers from outside the network are able, on the specified ports, to access internal computers by targeting the external IP. I'm now replacing a TP-Link router with a D-link VDSL N 6740U router, (and copied over all the settings,) and I've noticed that one thing stopped working: With the TP-link router, you could access those port-forwarded computers from within the network, using the external IP, and they would be forwarded to the relevant computers. With the new D-Link router, it doesn't work. You might be wondering, why would you want to use the external IP and port forwarding when you're inside the internal network anyway and can just access the internal IP? One example for why this is useful: You have an iPhone app that connects to a service on an internal computer. The iPhone app knows to connect to the external IP. When we put that iPhone inside the internal network (via WiFi), it suddenly stops working, because it can't access the service from the external IP anymore. Is it an inherent property of D-Link routers that they do not allow accessing internal servers from inside the network by targeting the external IP? Or is there a way to make it work?

  Read the article

• IP queue buffer

  - by summerbulb

  I seem to have an issue with IP queue. I have a linux machine that I am using to run some experiments. The linux machine is configured to be a router, having two NICs, connecting two other computers, and managing their network traffic. All incoming packages are captured, using iptables, and analyzed by a C application. The application analyzing the packets has a built-in delay, as part of the experiment. So I have one very fast computer sending packets through my linux-router and a (relatively) slow linux-router that analyses and deals with the packets, one by one. This situation leads to the fact that when I fire up a sender application on one of the computers connected to the linux-router, my IP queue on the linux-router gets filled up (almost) instantaneously. The IP queue's max length is currently set to 1024, and if it overflows, the packets are dropped. This is expected and i'm OK with it. But, (and this is where it gets interesting), every now and then I get the following error: "Failed to receive netlink message: No buffer space available" At start, I thought this was due to the IP queue overflow, but after some analysis i found that sometimes I get the error even if the IP queue buffer did not overflow, and sometime I DON'T get the message even though the buffer DID overflow. When I run > cat /proc/net/ip_queue, I get the following table (also used to monitor the IP queue overflow): Peer PID : 27389 Copy mode : 2 Copy range : 65535 Queue length : 0 Queue max. length : 1024 Queue dropped : 1166875 Netlink dropped : 2916 Looking at the last two values, Queue dropped seems to refer to packets that did not manage to get into the IP queue because the buffer was full. I can see this value rise as I bombard the linux-router. Netlink dropped ( as it's name implies :) ) seems to have to do with the error i'm getting. I did my best to search for material on this error, but wasn't able to find anything that seemed to point me in the required direction. Bottom line: Why am I getting this error and what can I do to avoid it?

  Read the article

• PowerConnect 3548p SNTP and web interface not working

  - by Force Flow

  I have been unable to get SNTP and access to the web interface working properly on a Dell PowerConnect 3548p. In the logs, this message appears over and over again: 04-Jan-2000 20:19:29 :%MNGINF-W-ACL: Management ACL drop packet received on interface Vlan 172 from 172.17.0.3 to 172.18.0.10 protocol 17 service Snmp 172 is the management vlan. 172.17.0.3 is the DNS server 172.18.0.10 is the switch's IP address. The DNS server and the switch are located on different subnets and separated by routers. I am unable to access the web interface of the switch from the 172.17.x.x subnet. I can only access the web interface of the switch if I am accessing it from the 172.18.x.x subnet. There is also a managed linksys switch on the 172.18.x.x subnet on the 172 vlan, which has no problem with SNTP. I can also access it from the 172.17.x.x network. So, it stands to reason that this is not a firewall or routing issue, but with the 3548p switch. I suspect the issue is with management permissions/ACLs on the 3348p switch, but that's about as much as I've been able to determine so far. Any ideas?

  Read the article

• Streaming music throughout the house on a budget?

  - by greggannicott

  I was wondering whether anyone knew of a way to stream music throughout a house on a budget? I want to avoid spending any money on this (eg. I don't want to buy a d-link style device). It would be ideal if I could use my existing hardware and some open source software. I have three old(ish) PCs knocking around. I'm happy to stick either Windows or Linux on them. They can all be hooked up to speakers. The ideal solution would result in: the same audio being heard from every device (eg. when you hear a beat on one device, you'd hear it at the exact same time on another (so you don't get any echo)) I'd be able to control the source application (eg. the songs lined up) with my iPhone. I realise I'm being cheeky with those two wishes - but you never know your luck. Am I asking for too much, or is there a piece of software/protocol out there with this purpose in mind? I've been searching for sometime now, but haven't had any joy. Thanks in advance.

  Read the article

• Picasa 3.5: how to share the tagged faces from one PC to another

  - by Eduardo Molteni

  At home, we share our photos from a server. I've been tagging the faces in Picasa 3.5 in one PC, but in the other PC the same photos needs to be retagged. Where is this info stored so it can be shared between computers?

  Read the article

• Dual-WAN router

  - by aix

  I am looking for a router that would fit the following requirements: Two WAN interfaces: the primary is PPPoE, the secondary will link to a GigE port on another router (a 100Mbps link will suffice); Two (ideally four) GigE LAN ports; No requirement for a firewall; No requirement for Wi-Fi; Inexpensive. The plan for the two WAN interfaces is as follows. All outbound traffic will go to the primary, with exceptions based on destination IP/subnet or possibly on src+dest IPs/subnets. Such exceptions should be routed to the secondary. It would be very nice if, should the primary go down, the secondary would automatically take over for all outbound traffic. I am reasonably sure that I can put something together based on dd-wrt. However, I'd like to hear from you what alternatives are out there (especially something easier to set up for my use case, even if it means paying more for the hardware.)

  Read the article

• Chain Gateways on the LAN

  - by Black2night

  I installed m0n0wall in a virtualized environment, i have 10 PCs connected to a router ( 192.168.1.0/24) which connect them to the internet through PPPoE, the problem is that this router does not have a QoS so what i want to do is the following :- let all the PCs get their IP from the Router and the default gateway will be m0n0wall the moon wall will have 2 interface (Lan 192.168.1.20) and (Wan 192.168.1.21 and default gateway 192.168.1.1) now when any PC want to access the internet it should go through m0n0wall and then m0n0wall will forward the connection to the default gateway through the wan interface which is the PPPoE running on the router (192.168.1.1) the big question is this scenario possible or not and what do you suggest? Thanks

  Read the article

• Loading guest OS's (Windows) localhost through my host's (Mountain Lion) browsers

  - by Jonah Goldstein

  For work, I have to develop in Visual Studio, which I run via VMware's fusion 5. I really want to test via my mac's native browsers for a multitude of reasons. that is, view the IIs web stuffs that my windows VM should expose, in my mac's own native Firefox, Chrome... etc. if i could expose a pretty url, that would be even better, but i would certainly settle for an ugly IP :) I got a decent number of views but no response when I asked in VMware's own boards. Everyone seems to want to go the other direction (developing in sublimetext/textmate serving up through MAMP and exposing it to windows browsers to test) and there seems to be tried a true solutions for this. unfortunately (or fortunately depending on your preference) my startup is pretty entrenched in the visual studio development tools. I'm really hoping that someone knows the answer to this. Thanks :)

  Read the article

• "Play on another device" function not working with Samsung Allshare

  - by Tural Teyyuboglu

  Briefly I can't get work "Play on another device" function More detailed My Samsung TV (which support network) and PC are in the same network. The problem is, I can play PC contents from TV. But when I try to control TV remotely from Allshare software (PC), it shows TV only as connected device: But not as remote player in "players" list The result Tried to turn off firewall completely, reset router, re-install software. No success. Please help. BTW. On this link they kinda explained how to do it, but I software doesn' detect the TV as player in my case: http://www.samsung.com/global/allshare/pcsw/quickguide.html

  Read the article

• How to securly join two networks together over the Internet?

  - by Pyrolistical

  Let's say there are two locations. Both locations have their own fast Internet connections. How do you join these two networks together such that every computer can see every other computer? Do you need a domain controller, or can you do this with workgroups? EDIT The obvious solution seems to be VPN, but can VPN be implemented on the routers only? Can the computers on the network be configuration free?

  Read the article

• Is Winpcap able to capture all packets going through a Gigabit NIC without missing any packets?

  - by Patrick L

  I want to use Winpcap to capture all network packets going through a Gigabit NIC of a server. Assuming that I am able to utilize the network link up to 100%, the maximum network speed is 1000Mbps. If we exclude the TCP/IP headers, the maximum TCP data rate should be roughly 940Mbps. Let's say I send a 1GB file through the NIC at 940Mbps using TCP destination port 6000. I use Winpcap to capture all network packets going through the NIC and then dump it to a pcap file. If I use Wireshark to analyze the pcap file and then check the sum of packet size for all network packets sent to TCP port 6000, am I able to get exactly 1GB from the pcap file? Thanks.

  Read the article

• Remote kill, upload, execute file

  - by Masoud M.

  I'm developing a program and I need to upload my xyz.exe file to many host machines and execute them frequently. I need a server-client tool to do it as below steps after an update signal from my PC: Those host machine should kill any running processes with name xyz.exe. Download my new xyz.exe. Then execute new xyz.exe. I know about some tools like PsExec, but I need a tools with better user-interface and more powerful. Is there any tool to do it ? UPDATE: The systems are in a same LAN, OS is windows (XP or 7), No full remote access is needed. I'm a developer and my program should run in remote hosts and I'm testing my application.

  Read the article

• Understanding tcptraceroute versus http response

  - by kojiro

  I'm debugging a web server that has a very high wait time before responding. The server itself is quite fast and has no load, so I strongly suspect a network problem. Basically, I make a web request: wget -O/dev/null http://hostname/ --2013-10-18 11:03:08-- http://hostname/ Resolving hostname... 10.9.211.129 Connecting to hostname|10.9.211.129|:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] Saving to: ‘/dev/null’ 2013-10-18 11:04:11 (88.0 KB/s) - ‘/dev/null’ saved [13641] So you see it took about a minute to give me the page, but it does give it to me with a 200 response. So I try a tcptraceroute to see what's up: $ sudo tcptraceroute hostname 80 Password: Selected device en2, address 192.168.113.74, port 54699 for outgoing packets Tracing the path to hostname (10.9.211.129) on TCP port 80 (http), 30 hops max 1 192.168.113.1 0.842 ms 2.216 ms 2.130 ms 2 10.141.12.77 0.707 ms 0.767 ms 0.738 ms 3 10.141.12.33 1.227 ms 1.012 ms 1.120 ms 4 10.141.3.107 0.372 ms 0.305 ms 0.368 ms 5 12.112.4.41 6.688 ms 6.514 ms 6.467 ms 6 cr84.phlpa.ip.att.net (12.122.107.214) 19.892 ms 18.814 ms 15.804 ms 7 cr2.phlpa.ip.att.net (12.122.107.117) 17.554 ms 15.693 ms 16.122 ms 8 cr1.wswdc.ip.att.net (12.122.4.54) 15.838 ms 15.353 ms 15.511 ms 9 cr83.wswdc.ip.att.net (12.123.10.110) 17.451 ms 15.183 ms 16.198 ms 10 12.84.5.93 9.982 ms 9.817 ms 9.784 ms 11 12.84.5.94 14.587 ms 14.301 ms 14.238 ms 12 10.141.3.209 13.870 ms 13.845 ms 13.696 ms 13 * * * … 30 * * * I tried it again with 100 hops, just to be sure – the packets never get there. So how is it that the server does respond to requests via http, even after a minute? Shouldn't all requests just die? I'm not sure how to proceed debugging why this server is slow (as opposed to why it responds at all).

  Read the article

• How to determine most stable Cisco IOS release?

  - by Chris J

  This post is about a Catalyst 4948E switch. I was looking on the download page and realized that there are no "GD" versions available. Are the "ED" versions stable? Even if you change "ED" to "GD" in the URL the IOS images are still the same. http://www.cisco.com/cisco/software/release.html?mdfid=283027810&flowid=3592&softwareid=280805680&release=15.1.1-SG2&relind=AVAILABLE&rellifecycle=ED&reltype=latest Is 15.1 as reliable as 15.0? My devices are currently on the 12.2 train. Is there anything special to upgrade to one of the 15.x trains? Are the configurations compatible.

  Read the article

• How is DNS used by individual processes?

  - by atroon

  When resolving FQDNs or machine names to IP addresses on my local network (mycompany.internal) I can use dig on the command line (linux/mac) or nslookup (windows) to query the configured server and get a response. But trying to enter the FQDN or even just the machine name in a ping command or in a web browser results in 'Unknown Host' or DNS errors. Here's a sample, this one from the Mac: mac:~ atroon$ dig server.mycompany.internal ; <<>> DiG 9.6.0-APPLE-P2 <<>> server.mycompany.internal ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 5219 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;server.mycompany.internal. IN A ;; ANSWER SECTION: server.mycompany.internal. 1200 IN A 172.16.254.36 ;; Query time: 0 msec ;; SERVER: 172.16.254.8#53(172.16.254.8) ;; WHEN: Wed Dec 16 11:39:15 2009 ;; MSG SIZE rcvd: 55 mac:~ atroon$ ping server.mycompany.internal<br> ping: cannot resolve server.mycompany.internal: Unknown host I cannot for the life of me figure this one out. The DNS server is a SBS 2003 box which handles AD, some file/print, etc for a small company network. This issue happens to me about three times a week, and when I'm connected to the local network directly, the same switch as the server even. I can make any connection I want with IP addresses, I just can't make DNS work. Additionally, at the same time I'm experiencing this, other users are fine, which makes me think it's a problem on my Mac. But what sort of problem? How can dig send a query and get a reply, and ping say 'unknown host'? I'm posting here vs. serverfault because I think this is a local problem not a server problem...but if anyone can point me at the server, I guess we'll head down the street a domain or two.

  Read the article

• How to force Windows 7 to ask for a "fresh" IP address from DHCP server?

  - by haimg

  I'm troubleshooting a certain issue with my DHCP configuration, and need my Windows machine to ask for a "fresh" IP address, so I can see which address DHCP server gives by default. When I do ipconfig /release followed by ipconfig /renew, Windows "proposes" its old IP address to the DHCP server (just checked with Wireshark, initial "DHCP Discover" message has Option-50 (requested IP address) with Windows machine's old IP). Tried disabling/enabling network adapter. Same behavior. Question: How can I force Windows to just ask for a new IP address, without proposing its old IP address.

  Read the article

• How do I get the IP Adress of my vpn server

  - by kashif

  I Connect to internet using PPTP connection type from my computer using following setting internet address: blue.connect.net.pk user id: myusername password: mypassword my problem: my dwr-112 router doesn't support internet address name, it rather supports only ip address of the server i.e I'm not able to type blue.connect.net.pk as it only supports server's ip adress. my question: How can I know the ip address of vpn server so that I can configure my dwr-112 router to connect to internet using pptp connection type

  Read the article

• Turning on Bluetooth disables wifi on Yoga 2

  - by Yostage

  I have a Lenovo Yoga 2. The moment that I turn on bluetooth, the wifi drops out - I lose connection, and connecting again shows "connection failed". If I turn the bluetooth off, wifi can reestablish fine. I've tried lots of different combinations of drivers for both the wifi and the bluetooth, but no combination has has changed this behavior yet. I've read some speculation that the cards have insufficient shielding, but that seems like kind of a large flaw to ship with. I've tried with a Carbon X1, a Yoga 2 Pro, and a Yoga 2 all next to each other on the desk while running InSSIDer. The X1 and the Y2P don't lose wifi connection when the bluetooth turns on, but the Y2 does immediately. The Y2P and the Y2 are running the same drivers for bluetooth and wifi, and appear to have the same wireless card internally. During the failure state, InSSIDer still sees signal strength for my network, but I cannot connect to it. stats: the card that comes in the laptop is an Intel Wireless-N 7260 Intel Bluetooth driver is at 17.0.1401.422 Intel Wireless driver is at 17.0.2.5 Windows 8.1 x64 Home wifi is a Medialink MWN-WAPR150N

  Read the article

• "DNS not responding" error with D-Link router and PPTP internet connection

  - by Born2win

  I have a D-Link DIR-615 router since around six months. My internet connection is VPN (PPTP) based, i.e. I have been given a username and password from my ISP and my IP address is dynamic. Since a few days I am experiencing a serious problem. My router connects normally (I can see the yellow light), but my computer is giving me a "DNS not responding" error. I have tried everything (reset, reboot etc.) but no success.

  Read the article

• TCP stops sending weirdly.

  - by Utoah

  In case to find out the cause of TCP retransmits on my Linux (RHEL, kernel 2.6.18) servers connecting to the same switch. I had a client-server pair send "Hello" to each other every 200us and captured the packets with tcpdump on the client machine. The command I used to mimic client and server are: while [ 0 ]; do echo "Hello"; usleep 200; done | nc server 18510 while [ 0 ]; do echo "Hello"; usleep 200; done | nc -l 18510 When the server machine was busy serving some other requests, the client suffered from abrupt retransmits occasionally. But the output of tcpdump seemed irrational. 16:04:58.898970 IP server.18510 > client.34533: P 4531:4537(6) ack 3204 win 123 <nop,nop,timestamp 1923778643 3452833828> 16:04:58.901797 IP client.34533 > server.18510: P 3204:3210(6) ack 4537 win 33 <nop,nop,timestamp 3452833831 1923778643> 16:04:58.901855 IP server.18510 > client.34533: P 4537:4549(12) ack 3210 win 123 <nop,nop,timestamp 1923778646 3452833831> 16:04:58.903871 IP client.34533 > server.18510: P 3210:3216(6) ack 4549 win 33 <nop,nop,timestamp 3452833833 1923778646> 16:04:58.903950 IP server.18510 > client.34533: P 4549:4555(6) ack 3216 win 123 <nop,nop,timestamp 1923778648 3452833833> 16:04:58.905796 IP client.34533 > server.18510: P 3216:3222(6) ack 4555 win 33 <nop,nop,timestamp 3452833835 1923778648> 16:04:58.905860 IP server.18510 > client.34533: P 4555:4561(6) ack 3222 win 123 <nop,nop,timestamp 1923778650 3452833835> 16:04:58.908903 IP client.34533 > server.18510: P 3222:3228(6) ack 4561 win 33 <nop,nop,timestamp 3452833838 1923778650> 16:04:58.908966 IP server.18510 > client.34533: P 4561:4567(6) ack 3228 win 123 <nop,nop,timestamp 1923778653 3452833838> 16:04:58.911855 IP client.34533 > server.18510: P 3228:3234(6) ack 4567 win 33 <nop,nop,timestamp 3452833841 1923778653> 16:04:59.112573 IP client.34533 > server.18510: P 3228:3234(6) ack 4567 win 33 <nop,nop,timestamp 3452834042 1923778653> 16:04:59.112648 IP server.18510 > client.34533: P 4567:5161(594) ack 3234 win 123 <nop,nop,timestamp 1923778857 3452834042> 16:04:59.112659 IP client.34533 > server.18510: P 3234:3672(438) ack 5161 win 35 <nop,nop,timestamp 3452834042 1923778857> 16:04:59.114427 IP server.18510 > client.34533: P 5161:5167(6) ack 3672 win 126 <nop,nop,timestamp 1923778858 3452834042> 16:04:59.114439 IP client.34533 > server.18510: P 3672:3678(6) ack 5167 win 35 <nop,nop,timestamp 3452834044 1923778858> 16:04:59.116435 IP server.18510 > client.34533: P 5167:5173(6) ack 3678 win 126 <nop,nop,timestamp 1923778860 3452834044> 16:04:59.116444 IP client.34533 > server.18510: P 3678:3684(6) ack 5173 win 35 <nop,nop,timestamp 3452834046 1923778860> Packet 3228:3234(6) from client was retransmitted due to ack timeout. What I could not understand was that the client machine did not send out any packets after the first 3228:3234(6) packets was sent. The server machine had advertised a window (scaled) large enough. The data transfer up to the retransmit was fine which meant no slow start should be in action. What can cause the client machine to stop sending until the packet timed out? BTW, I am unable to run tcpdump on the server machine.

  Read the article

• Under FreeBSD, can a VLAN interface have a smaller MTU than the primary interface?

  - by larsks

  I have a system with two physical interfaces, combined into a LACP aggregation group. That LACP channel has two VLANs, one untagged (the "native vlan") and one using VLAN tagging. This gives us: lagg0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4> ether 00:25:90:1d:fe:8e inet 10.243.24.23 netmask 0xffffff00 broadcast 10.243.24.255 media: Ethernet autoselect status: active laggproto lacp laggport: em1 flags=1c<ACTIVE,COLLECTING,DISTRIBUTING> laggport: em0 flags=1c<ACTIVE,COLLECTING,DISTRIBUTING> vlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=3<RXCSUM,TXCSUM> ether 00:25:90:1d:fe:8e inet 10.243.16.23 netmask 0xffffff80 broadcast 10.243.16.127 media: Ethernet autoselect status: active vlan: 610 parent interface: lagg0 Is it possible to set a 9K MTU on lagg0 while preserving the 1500 byte MTU on vlan0? Normally I would simply try this out, but this is actually on a vendor-supported platform and I am loathe to make changes "behind the back" of their administration interface. This system is roughly FreeBSD 7.3.

  Read the article

• Tomato/DD-WRT router to act as switch & only NAT some port

  - by fseto

  BACKGROUND: I have a device that must use a real IP address. Currently, my ISP uses DHCP and I can have up to 4 real IP address assigned. However, the cable modem only have 1 ethernet port and it's connected to my router (running Tomato, but can run DD-wrt or other Openwrt if required). Question stems from how I can connect the additional device, requiring a real IP? EASY SOLUTION: would be to get a switch and connect to the CM, Router, and Device. But alas, I want to avoid this route, since: my wiring cabinet in my home is drawing lots of power and heat already Device will be unprotected by any firewall unable to monitor the traffic to/from device. Besides, what would be the FUN in that? =) IDEA: So what I want to do is to configure the router, so that one of the switchport is removed from the normal br0 bridge. Instead, I want to make it behave like a switch on the WAN port. What's the best way of doing this? Should I create another bridge on the WAN & the device port? Can a single port belongs to two bridges? or would I need to create a subinterface first? Would I need a DHCP-relay? Am I expecting too much from my poor cheapie router? +------+ | CM | +--++--+ || +----WAN---------------+ | / \ Router | | BR1? BR0 | | | \ | | | {NAT} | | | / | | \ | +-P0----P1-P2-P3-Wifi--+ | +------+ |Device| +------+

  Read the article

< Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >