Search Results

Search found 4939 results on 198 pages for 'fabiano ps'.

Page 147/198 | < Previous Page | 143 144 145 146 147 148 149 150 151 152 153 154  | Next Page >

• Best way to run site through https on server which can't add additional certs

  - by penguin

  So I'm in a curious situation in that I am using a particular server to host things, which I can't host anywhere else (it has access to user databases etc which can't otherwise be accessed). I've been in quite a bit of discussion with the sysadmin at it looks like the only way to run our site: www.foo.com over https may be through some sort of proxy. Currently, users go to www.foo.com and are redirected to https:// host-server.com/foo, as there is an SSL cert installed on that. I want users to be on https:// www.foo.com. I'm told that for various reasons it's going to be very difficult to add an additional SSL cert to the host server. So I was wondering if it is possible to have the DNS records point to a new server, which then creates the HTTPS connection with the browser. Then it forwards requests to https:// host-server.com/foo and feeds the replies back to the original requester. Does this make sense? And would it be at all feasible? My experience with SSL is limited at best, so thanks in advance for your help :) ps gaps in hyperlinks as ServerFault was getting unhappy with the number of links I was posting!

  Read the article

• unable to set xmx beyond 4gb on system having 8gb RAM

  - by Arun

  I need to set ANT_OPTS=-Xms1024m -Xmx6144m -XX:PermSize=1024m -XX:MaxPermSize=1024m JAVA_OPTS=-Xms1024m -Xmx6144m -XX:PermSize=1024m -XX:MaxPermSize=1024m I have a system with 8gb(recently upgraded from 4 gb) But once i set the ant opts to above said value I am not able to run any of my ant targets and I get the following error [ERROR] Argument error: -Xmx6144m [ERROR] Specified maximum heap size (6144 MB) is larger than the address space on this platform (4 GB). [WARN ] -XX:PermSize=1024m is not a valid VM option. Ignoring [WARN ] -XX:MaxPermSize=1024m is not a valid VM option. Ignoring Could not create the Java virtual machine. This indicates the Java that I have on my system java version "1.6.0_20" Java(TM) SE Runtime Environment (build 1.6.0_20-b02) Oracle JRockit(R) (build R28.1.0-123-138454-1.6.0_20-20101014-1351-windows-x86_64, compiled mode) and I am running a Windows 7 on Intel Core 2 duo 3Ghz processor and 8gb RAM Any pointers in solving this issue would be of great help. PS: I did google for the error and it was one of my 1st such occurence where I didnot get any links pointing to the specific solution. Maybe no one has encountered such a scenario

  Read the article

• How to add "create a new python file" to the registry

  - by Anthony

  I have Python 3.2 on a windows 7 operating system. The other day I thought that it would be convenient to add a link to create a new .py file in the right hand click "new" menu. I had worked with the registry before and looked up how to add an item to the "new" menu, but when I got to the registry under HKEY_CLASSES_ROOT the .py extension key was not there. I only know how to add something to the "new" menu using the extension key. I searched the web, but could not come up with any other ways. Python works perfectly fine, and I don't want to mess anything up by adding the extension key. So here are my questions: Will I mess up python or something else by adding a .py key?( I know it is dangerous to work with the registry, that is why I am looking for a safe solution) If not how can I go about doing this? OR Is there a different way to add "create a new python file" to the "new" menu? If so how can I do it? OR If the only way is very complicated should I forget about it? Thank you in advance. P.S I originally posted on Stack Overflow that they told me to move it over here.

  Read the article

• Linux as a router for public networks

  - by nixnotwin

  My ISP had given me a /30 network. Later, when I wanted more public ips, I requested for a /29 network. I was told to keep using my earlier /30 network on the interface which is facing ISP, and the newly given /29 network should be used on the other interface which connects to my NAT router and servers. This is what I got from the isp: WAN IP: 179.xxx.4.128/30 CUSTOMER IP : 179.xxx.4.130 ISP GATEWAY IP:179.xxx.4.129 SUBNET : 255.255.255.252 LAN IPS: 179.xxx.139.224/29 GATEWAY IP :179.xxx.139.225 SUBNET : 255.255.255.248 I have a Ubuntu pc which has two interfaces. So I am planning to do the following: eth0 will be given 179.xxx.4.130/30 gateway 179.xxx.4.129 eth1 will be given 179.xxx.139.225/29 And I will have the following in the /etc/sysctl.conf: net.ipv4.ip_forward=1 These will be iptables rules: iptables -A FORWARD -i eth0 -o eth1 -j ACCEPT iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT My clients which have the ips 179.xxx.139.226/29 and 179.xxx.139.227/29 will be made to use 179.xxx.139.225/29 as gateway. Will this configuration work for me? Any comments? If it works, what iptables rules can I use to have a bit of security? P.S. Both networks are non-private and there is no NATing.

  Read the article

• exim4 seem to stop listening

  - by trakos

  Hey, I have a strange problem with my exim4 configuration. I have a dedicated server running debian for quite a long time now, but I'm not really using it actively recently, so everything just worked due to lack of changes ;) However, recently, my exim4 smtp stopped answering on port 25. It does not respond through localhost, as well - even though it's set to listen on any interface available. Some things I've checked: ks:/home/trakos/Maildir/new# netstat -ap | grep exim tcp 0 0 *:smtp : LISTEN 12521/exim4 ks:/home/trakos/Maildir/new# exiwhat 12521 daemon: -q30s, listening for SMTP on port 25 (IPv4) ks:/home/trakos/Maildir/new# cat /var/log/exim4/rejectlog ks:/home/trakos/Maildir/new# cat /var/log/exim4/paniclog The queue is set for 30s only because I was running it in a non-daemon mode to see any output. Strangely enough, no suspicious output is given, netstat even shows it is listening on port 25, but still trying to telnet to it times out. The only things that may have changed recently are: I've got second IP for my server I remember that few days ago my spamassasin crashed, and I've started it up again So yeah, I'm really clueless about this one now :P I mean, I don't even know what could be failing here. Could someone give me some ideas what should I check next? PS: it has uptime of 442 days, so I haven't really tried rebooting it yet ^^

  Read the article

• 404 with serving static files in a custom nginx configuration

  - by code90

  In my nginx configuration, I have the following: location /admin/ { alias /usr/share/php/wtlib_4/apps/admin/; location ~* .*\.php$ { try_files $uri $uri/ @php_admin; } location ~* \.(js|css|png|jpg|jpeg|gif|ico|pdf|zip|rar|air)$ { expires 7d; access_log off; } } location ~ ^/admin/modules/([^/]+)(.*\.(html|js|json|css|png|jpg|jpeg|gif|ico|pdf|zip|rar|air))$ { alias /usr/share/php/wtlib_4/modules/$1/admin/$2; } location ~ ^/admin/modules/([^/]+)(.*)$ { try_files $uri @php_admin_modules; } location @php_admin { if ($fastcgi_script_name ~ /admin(/.*\.php)$) { set $valid_fastcgi_script_name $1; } fastcgi_pass $byr_pass; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /usr/share/php/wtlib_4/apps/admin$valid_fastcgi_script_name; fastcgi_param REDIRECT_STATUS 200; include /etc/nginx/fastcgi_params; } location @php_admin_modules { if ($fastcgi_script_name ~ /admin/modules/([^/]+)(.*)$) { set $byr_module $1; set $byr_rest $2; } fastcgi_pass $byr_pass; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /usr/share/php/wtlib_4/modules/$byr_module/admin$byr_rest; fastcgi_param REDIRECT_STATUS 200; include /etc/nginx/fastcgi_params; } Following is the requested url which ends up with "404": http://www.{domainname}.com/admin/modules/cms/styles/cms.css Following is the error log: [error] 19551#0: *28 open() "/usr/share/php/wtlib_4/apps/admin/modules/cms/styles/cms.css" failed (2: No such file or directory), client: xxx.xxx.xxx.xxx, server: {domainname}.com, request: "GET /admin/modules/cms/styles/cms.css HTTP/1.1", host: "www.{domainname}.com" Following urls works fine: http://www.{domainname}.com/admin/modules/store/?a=manage http://www.{domainname}.com/admin/modules/cms/?a=cms.load Can anyone see what the problem could be? Thanks. PS. I am trying to migrate existing sites from apache to nginx.

  Read the article

• xrandr fails when 3rd monitor has higher resolution

  - by Pi3cH

  I tried many combinations with xrandr command under lubuntu 12.04 to setup my three monitors DVI (DELL 1) left detected as HDMI1 HDMI (LG E2290) middle detected as HDMI2 VGA (DELL 2) right detected as VGA1 I can get the display with fix 1280x1024 on all the monitors. But once I setup 1280x1024 + 1920x1080 + 1280x1024, I get blank screen on all the monitors. Sometimes it throws crts fail error instead of blanking out. Anyone have similar issues? any solutions/workarounds? P.S. I can setup two monitors using 1280x1280 and 1920x1080 P.S.S. HDMI2 required at least 1920x1080 to display sharp picture. Outputs (it seems graphic card supports up to 8192x8192): xrandr Screen 0: minimum 320 x 200, current 3840 x 1024, maximum 8192 x 8192 VGA1 connected 1280x1024+2560+0 (normal left inverted right x axis y axis) 338mm x 270mm 1280x1024 60.0*+ 75.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 HDMI1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 376mm x 301mm 1280x1024 60.0*+ 75.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 HDMI2 connected 1280x1024+1280+0 (normal left inverted right x axis y axis) 477mm x 268mm 1920x1080 60.0 + 1680x1050 60.0 1280x1024 75.0 60.0* 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 DP1 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis) 3 CRTs (0,1 VGA, 0,1,2 for other HDMI) xrandr --verbose VGA1 connected 1280x1024+2560+0 (0x47) normal (normal left inverted right x axis y axis) 338mm x 270mm Identifier: 0x42 Timestamp: 51324 Subpixel: unknown Gamma: 1.0:1.0:1.0 Brightness: 1.0 Clones: CRTC: 0 CRTCs: 0 1 ... HDMI1 connected 1280x1024+0+0 (0x47) normal (normal left inverted right x axis y axis) 376mm x 301mm Identifier: 0x43 Timestamp: 51324 Subpixel: unknown Gamma: 1.0:1.0:1.0 Brightness: 1.0 Clones: CRTC: 1 CRTCs: 0 1 2 ... HDMI2 connected 1280x1024+1280+0 (0x47) normal (normal left inverted right x axis y axis) 477mm x 268mm Identifier: 0x44 Timestamp: 51324 Subpixel: unknown Gamma: 1.0:1.0:1.0 Brightness: 1.0 Clones: CRTC: 2 CRTCs: 0 1 2 Below command fails: xrandr --output VGA1 --auto --output HDMI2 --auto --left-of VGA1 --output HDMI1 --auto --left-of HDMI2 Below command passes: xrandr --output VGA1 --auto --output HDMI2 --mode 1280x1024 --rate 60.0 --left-of VGA1 --output HDMI1 --auto --left-of HDMI2 Graphic card VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09)

  Read the article

• Preventing endless forwarding with two routers

  - by jarmund

  The network in quesiton looks basically like this: /----Inet1 / H1---[111.0/24]---GW1---[99.0/24] \----GW2-----Inet2 Device explaination H1: Host with IP 192.168.111.47 GW1: Linux box with IPs 192.168.111.1 and 192.168.99.2, as well as its own route to the internet. GW2: Generic wireless router with IP 192.168.99.1 and its own route to the internet. Inet1 & Inet2: Two possible routes to the internet In short: H has more than one possible route to the internet. H is supposed to only access the internet via GW2 when that link is up, so GW1 has some policy based routing special just for H1: ip rule add from 192.168.111.47 table 991 ip route add default via 192.168.99.1 table 991 While this works as long as GW2 has a direct link to the internet, the problem occurs when that link is down. What then happens is that GW2 forwards the packet back to GW1, which again forwards back to GW2, creating an endless loop of TCP-pingpong. The preferred result would be that the packet was just dropped. Is there something that can be done with iptables on GW1 to prevent this? Basically, an iptables-friendly version of "If packet comes from GW2, but originated from H1, drop it" Note1: It is preferable not to change anything on GW2. Note2: H1 needs to be able to talk to both GW1 and GW2, and vice versa, but only GW2 should lead to the internet TLDR; H1 should only be allowed internet access via GW2, but still needs to be able to talk to both GW1 and GW2. EDIT: The interfaces for GW1 are br0.105 for the '99' network, and br0.111 for the '111' network. The sollution may or may not be obnoxiously simple, but i have not been able to produce the proper iptables syntax myself, so help would be most appreciated. PS: This is a follow-up question from this question

  Read the article

• Dealing with upgrade of libevent on Amazon AWS

  - by Dreen

  I am building an application (in Python) on Amazon EC2 that has a following dependency chain: gevent-websocket ---> gevent ---> libevent The last one (libevent) got upgraded on Sunday and my server is now generating this error: (...) File "/usr/lib/python2.6/site-packages/gevent-0.13.7-py2.6-linux-x86_64.egg/gevent/__init__.py", line 41, in <module> from gevent import core ImportError: libevent-1.4.so.2: cannot open shared object file: No such file or directory Not wanting to spend much time on the issue, I tried to mitigate it by creating a symlink to an always-recent version: $ sudo ln -s /usr/lib64/libevent.so /usr/lib64/libevent-1.4.so.2 But it didn't quite work: (...) File "/usr/lib/python2.6/site-packages/gevent-0.13.7-py2.6-linux-x86_64.egg/gevent/__init__.py", line 41, in <module> from gevent import core ImportError: /usr/lib/python2.6/site-packages/gevent-0.13.7-py2.6-linux-x86_64.egg/gevent/core.so: undefined symbol: current_base I am a bit stumped as to how to proceed. Should I create more symlinks? To what? Or is there a better way to solve this problem... PS. For the record I am using Amazon AMI.

  Read the article

• moving files and directories between two machine, via a third, preserving permissions and usernames

  - by Jarmund

  The situation is as follows: Machine A has a file repository accessible via rsync Machine B needs the above mentioned files with all permissions and ownerships intact (including groups etc) Machine C has access to both A and B, but has a completely different set of users. Normally, i would just rsync everything over, directly between A and B, but due to severely limited bandwidth at the moment, i need something different, as rsync times out after building the list of the 430 files (49Mb uncompressed... can be compressed down to ~7Mb). What i've tried so far: rsync everything over from A to C, tar it, copy the tarball over, and then untar it, however, this messes up the ownership and/or the permissions. To rsync it from A to C, i run this command: rsync --numeric-ids --password-file=/root/rsync_pwd_file -oaPvu rsync://[email protected]/portal_2/ ./portal_2/ ...and from the looks of things, they do end up on C with the correct ownerships/permissions/flags/everything (not 100% sure, though.. are there any more switches i can throw in there? did i miss something?) copying the tarball over is simple enough (slow as a one-legged turtle due to the bandwidth, but it checksums out alright) What i'm unsure of is the flags and switches for creating and extracting the tarball, so could someone please provide the full commands for creating a tarball from /root/portal_2 on machine C (with everything intact) and extracting the tarball into /var/ex/portal_2 on machine B? ? Also, are there any other approaches worth mentioning that could allow me to perform this? I have root access to A and C, whereas i only have rsync access to B. PS: I'm running rsync v2.6.9 on machine B, and unfortunately i do not have the oportunity to upgrade to v3

  Read the article

• Rkhunter reports file properties have changed

  - by CountMurphy

  I am running a fully updated LTS copy of Ubuntu server. Today I ran rkhunter (as I do from time to time). This is the output I got: Warning: The file properties have changed: [15:52:25] File: /bin/ps [15:52:25] Current hash: f22991ec93ae966c856d367f42fc3d8a484bd827 [15:52:25] Stored hash : 1892268bf195ac118076b1b0f53e7a637eb6fbb3 [15:52:25] Current inode: 142902 Stored inode: 130894 [15:52:25] Current file modification time: 1324307913 (19-Dec-2011 07:18:33) [15:52:25] Stored file modification time : 1260992081 (16-Dec-2009 11:34:41) Warning: The file properties have changed: [15:52:33] File: /usr/bin/ldd [15:52:33] Current hash: f1e2ca5aa3a28994e2cebb64c993a72b7d97b28c [15:52:33] Stored hash : 295d9cedb121a5e431a39a6d201ecd7ce5640497 [15:52:33] Current inode: 2236210 Stored inode: 2234359 [15:52:33] Current size: 5280 Stored size: 5279 [15:52:33] Current file modification time: 1331165514 (07-Mar-2012 16:11:54) [15:52:33] Stored file modification time : 1295653965 (21-Jan-2011 15:52:45) Warning: The file properties have changed: [15:52:37] File: /usr/bin/pgrep [15:52:37] Current hash: 3eada9a96760f3e2c9111cfe32901d1432813c1d [15:52:37] Stored hash : ce265d0db9964b173fe5036f703a9b8d66e55df3 [15:52:37] Current inode: 2229646 Stored inode: 2224867 [15:52:37] Current file modification time: 1324307913 (19-Dec-2011 07:18:33) [15:52:37] Stored file modification time : 1260992081 (16-Dec-2009 11:34:41) Warning: The file properties have changed: [15:52:41] File: /usr/bin/top [15:52:41] Current hash: 6be13737d8b0950cea2f1ae3a46d4af713dbe971 [15:52:41] Stored hash : c7b495ecef3982eeb6f08a511861b1a1ae8775e6 [15:52:41] Current inode: 2229629 Stored inode: 2224862 [15:52:41] Current file modification time: 1324307913 (19-Dec-2011 07:18:33) [15:52:41] Stored file modification time : 1260992081 (16-Dec-2009 11:34:41) Warning: The file properties have changed: [15:52:53] File: /usr/sbin/cron [15:52:53] Current hash: e783ca973f970aa8a4bf5edc670e690b33914c3d [15:52:53] Stored hash : 4718257a8060736b9058aed025c992f02a74a5a7 [15:52:53] Current inode: 2224719 Stored inode: 2228839 [15:52:54] Current file modification time: 1330965568 (05-Mar-2012 08:39:28) There were also a few other I left out. Has my server been rooted? I am running fail2ban and do monitor failed ssh logins. nothing has come up. Could someone compare these hashes to their copy of Ubuntu Server (lts)? Please tell me these are false positives..... Edit: is something else like rkhunter I can run for a second scan?

  Read the article

• Apache Server with memcache, varnish and php slow request times

  - by coolestdude1

  My issue is that these servers are taking rather long for request about 2 seconds on average just to serve files. When we had just one server doing everything it was noticeably faster even with the same web app (Drupal 6 and Drupal 7). I want to get this number down to a reasonable level and so I need some help getting to the bottom of why the request times are so slow. This can cause the webapp to hang on post or put and generally leads to a bad user experience on my sites. PS: I am more of a server newbie so this has confounded me for quite some time. The domains: collabornation.net nptrainingworks.com (they run off the same two webservers using vhost configs) The Gear: Two Rackspace 4 Gig servers running CentOS 6.2 Final They have a mounted file system (gluster) that is used to keep files the same on both machines. They are behind a rackspace load balancer running round robin. Mysql is run using php-pdo and php-mysql as such mysql is run on another instance running memcache on that machine with phpMyAdmin located there as well. Apache version number 2.2.15-15.el6.centos.1 (httpd.x86_64) Varnish version number 3.0.2-1.el5 (varnish.x86_64) PHP version number 5.3.14-1.el6.remi (php.x86_64) Configs Linked Below Apache Conf Vhost Conf Varnish Backends Varnish Defaults Varnish Acl PHP INI Again need some help, much appreciated!

  Read the article

• IDE compatability with SATA image

  - by Ormis

  We had an old CNC machine's hard-drive fail recently. The hard-drive is an old 1275MB IDE (Seagate) and there were defiantly bad sectors on it. I was able to image the contents of the drive onto a drive in my computer before it became completely unusable (I used DD, replacing all bad sectors w/ 0s). After running a couple chdsks, the SATA drive will boot off of the image. This is great, but there's one problem. The CNC machine old and requires IDE, I've attempted to copy the currently booting image off of the SATA drive and onto IDE drives numerous times in numerous ways and every time I do so the machines return that a boot device cannot be found. Some other information: The file system is fat32, running windows 98 The SATA drive is an 80gb drive I have tried copying the image to three 20gb and two 80gb IDE drives I have checked the jumper on the back of the IDE drives when using them If anyone has any ideas, questions, suggestions, etc. please let me know. P.S. I would just put a fresh install of win98 on the machine if i had the installation media (so that's out of the question). And if it comes to it, this is my last week working here, so I'll leave that to my co-worker. EDIT: Also, I have tried using Clonezilla as well as straight up DD to copy the image to the IDE drives.

  Read the article

• External-Harddisk drive couldn't run unless in safe mode

  - by zfm

  This is the strangest thing ever happened to me... I have an external harddisk drive (ext-HDD), bought around 2 years ago (don't know whether this is an important issue or not). Here, I have a video file (.avi) in my internal harddisk dive (HDD), it worked very well, then I copy it to my ext-HDD, but I couldn't run the file directly from my ext-HDD! I tried to copy it back to my HDD (from the ext-HDD), and now the copy couldn't be run on my HDD too. Remember that I copy the file, so the original one was still there. I tried to go to safe mode (forget to mention, I use Windows 7 Pro), and this is where the strange thing happened, the copied files (both in ext-HDD and HDD) can be run in this safe mode. So, my question is, what could actually be happened there? PS: My ext-HDD is Axioo, 250 GB, exFAT... Edited: Currently I used MacOSX, and the file in the harddisk still can't be run. I haven't tried safe mode for Mac (is there one?), but will try later (if there is)

  Read the article

• RESOLVED Why does IPtables's NAT stop working when I enable the firewall's third interface?

  - by Kronick

  On my firewall I've three interfaces : eth0 : public IP (46.X.X.X.) eth0:0 public IP (46.X.X.Y.) eth1 : public IP (88.X.X.X.) eth2 : private LAN (172.X.X.X) I've setup a basic NAT which works great until I turn on the eth1 interface, I basically loose the connectivity. When I turn off the interface (ifconfig eth1 down) then the NAT re-work. I've added some policy routing via iproute, which makes my three public IP's available. I don't understand why turning on eth1 on makes the LAN unavailable. PS : weirder ; when I turn on eth1 BUT remove the NAT, then the firewall is accessible by using the public IPS. So to me it's exclusively a NAT issue, since without the NAT the network works while with the NAT without the second public interface, the NAT does work. Regards EDIT : I've been able to make it work by using iproute2 rules. That was definitely a routing issue. Here is what I did : ip rule add prio 50 table main ip rule add prio 201 from ip1/netmask table 201 ip rule add prio 202 from ip2/netmask table 202 ip route add default via gateway1 dev interface1 src ip1 proto static table 201 ip route append prohibit default table 201 metric 1 proto static ip route add default via gateway2 dev interface2 src ip2 proto static table 202 ip route append prohibit default table 202 metric 1 proto static # mutipath ip rule add prio 221 table 221 ip route add default table 221 proto static \ nexthop via gateway1 dev interface1 weight 2\ nexthop via gateway2 dev interface2 weight 3

  Read the article

• How do I send e-mails with attachments to a Microsoft WebTV user?

  - by Petr 'PePa' Pavel

  my friend uses Microsoft WebTV (e-mail address ends with @webtv.net) and I'd like to send him an e-mail with a picture attached to it. We went through a series of attempts one of which ended up a success, all others a failure. He just can't see my e-mail in his mailbox, when it contains an attachment. E-mails without attachments always go through all right. What seemed to help in the first successful case, was that he added my e-mail address to his address book and my e-mail suddenly showed up. Seemed to have been delivered before but hidden. He kept my address in his address book however, it didn't help with the following trials. He did look into his junk folder, nothing there. I made sure the file name contains no spaces. It's a regular jpeg, named something-like-this.jpg I downsized it to have only about 50k, as I've read somewhere that that's a limit. I actually doubt this piece of information, because I think the successful attempt was larger. webtv.net contains zero information. I watched their video demo for the e-mail client, so I at least know how the user interface looks like. I've never laid my hands on the real thing. I'm an advanced user myself (a programmer) but I can't wrap my mind around this. He on the other hand, is a very technically inexperienced user and because he's half way across the globe, I can't come and look over his shoulder. He doesn't have a computer, afaik there's no way I could see what he sees. Any ideas on how to debug this? Thanks for your time, guys. P.S. I can't tag this "webtv" because such tag doesn't exist yet and my reputation is too low, sorry.

  Read the article

• tftpd starts randomly

  - by Mutant

  A few days ago my Little Snitch filter starts popping up tftpd. I'd never seen this before, so I immediately start freaking out thinking my Mac has been compromised. I can't find anything unusual on the system. The process usually dies before I can trace it (little snitch never allowed the connection just left the popup up). I finally caught it once, and found this: [10:32]: sudo lsof -nlP | fgrep tftp Password: tftpd 1924 18446744 cwd DIR 1,3 1326 2 / tftpd 1924 18446744 txt REG 1,3 29856 163979456 /usr/libexec/tftpd tftpd 1924 18446744 txt REG 1,3 600576 163686622 /usr/lib/dyld tftpd 1924 18446744 txt REG 1,3 303300608 189014898 /private/var/db/dyld/dyld_shared_cache_x86_64 tftpd 1924 18446744 0u IPv4 0x34a76100fcbb06e3 0t0 UDP *:55818 tftpd 1924 18446744 2u IPv4 0x34a76100f1113c53 0t0 UDP *:69 [10:32]: ps ax | fgrep 1924 1924 ?? S 0:00.00 /usr/libexec/tftpd -i /private/tftpboot 1949 s000 S+ 0:00.00 fgrep 1924 For the life of me I can't figure out what is starting this. Nothing in cron, launchdaemons, etc. Google searches haven't yielded much either. The connection IP is different each time. So my question is: Has anyone seen anything like this before?

  Read the article

• Strange ssh login

  - by Hikaru

  I am running debian server and i have received a strange email warning about ssh login It says, that user mail logged in using ssh from remote address: Environment info: USER=mail SSH_CLIENT=92.46.127.173 40814 22 MAIL=/var/mail/mail HOME=/var/mail SSH_TTY=/dev/pts/7 LOGNAME=mail TERM=xterm PATH=/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games LANG=en_US.UTF-8 SHELL=/bin/sh KRB5CCNAME=FILE:/tmp/krb5cc_8 PWD=/var/mail SSH_CONNECTION=92.46.127.173 40814 my-ip-here 22 I looked in /etc/shadow and find out, that password for is not set mail:*:15316:0:99999:7::: I found this lines for login in auth.log n 3 02:57:09 gw sshd[2090]: pam_winbind(sshd:auth): getting password (0x00000388) Jun 3 02:57:09 gw sshd[2090]: pam_winbind(sshd:auth): pam_get_item returned a password Jun 3 02:57:09 gw sshd[2091]: pam_winbind(sshd:auth): user 'mail' granted access Jun 3 02:57:09 gw sshd[2091]: Accepted password for mail from 92.46.127.173 port 45194 ssh2 Jun 3 02:57:09 gw sshd[2091]: pam_unix(sshd:session): session opened for user mail by (uid=0) Jun 3 02:57:10 gw CRON[2051]: pam_unix(cron:session): session closed for user root and lots of auth failures for this user. There is no lines with COMMAND string for this user. Nothing was found with "rkhunter" and with "ps aux" process inspection, also there is no suspicious connections was found with "netstat" (as I can see) Can anyone tell me how it is possible and what else should be done? Thanks in advance.

  Read the article

• Restoring a fresh home folder in a shared user domain environment

  - by Cocoabean

  I am using a tool called pGINA that adds another credential provider to my Windows 7 clients so we can authenticate campus users via campus LDAP. We have the default Windows credential providers setup to authenticate off of our Active Directory, but we have students in our classes that don't have entries in our AD, and we need to know who they are to allow them internet access. Once these LDAP users login using pGINA, they are all redirected to the same AD account, a 'kiosk' account with GPOs in place to prevent anything malicious. My concern is that my users will accidentally save personal login information or files in that shared profile, and another user may login later and have access to a previous user's Gmail account, as the AppData folder on each computer is shared by anyone logging into the kiosk user. I've looked into MS's 'roll-your-own' SteadyState but it didn't seem to have what I wanted. I tried to write a PS script to copy a pre-saved clean version of the profile from a network share, but I just kept running into issues with CredSSP delegation and accessing the share from the UNC path. Others have recommended something like DeepFreeze but I'd like to do it without 3rd party tools if possible.

  Read the article

• How to install Red Hat Enterprise Linux on Apple Macbook Pro MacBookPro4,1

  - by Todd V. Rovito

  I have a one year old Mac Book Pro that I am trying to get RHEL 5.4 installed on via bootcamp. No matter what I do I can't get the installer to boot. I have tried multiple DVD's and even verified the install works on a new Mac Book Pro. Most of the time the installer simply locks up. I usually use Linux text with all-generic-ide on the boot line. I removed the ide parameter and I just used linux text. The results I get are that a bunch of kernel messages appear then the background turns blue and a thin text box pops up saying its loading ata..... something it disappears too fast for me to read. Then the machine freezes. I pressed the alt function keys to see if I could look at the system log, here is what it says: Alt-f3 says "trying to mount CD device hda" Alt-f4 says status error: hda: lastFailedSense Hda: Failed opcode was: unknown Hda: Lost interrupt Hda: Drive not ready for command Ide-cd: command 0x3 timed out Above this junk it looks like it found the partition because it knew it was 20 GB and listed as /dev/sda3. I think it has something to do with the CD drive, is that possible? Thanks again for the support. PS I posted in the apple support forums ( Apple.com Support Discussions Boot Camp Installation and Storage) and didn't get an answer.

  Read the article

• Low-traffic WordPress website on Apache keeps crashing server

  - by OC2PS

  I have recently moved my low-moderate traffic (1000 UAUs, 5000 pageviews on a busy day) website from shared hosting to a Centos 6 64-bit VPS with Apache and cPanel running on 4 quad-core processor (likely oversold) and 3GB memory (Xen). We've had problems from the beginning. The server keeps crashing. It seems PHP keeps expanding till it consumes all the memory and crashes the server. Some folks have suggested that I should abandon Apache/cPanel/PHP/mySQL and go with nginX/Varnish/PHP-FPM/SQLite. But that's just not possible for me as I am not very tech savvy and need a simple GUI like cPanel to be able to manage the mundane management tasks (can't afford to hire system administrator or get fully managed hosting). I have come across several posts discussing optimization of Apache for WordPress. But all of these lead to articles that are pretty dated such as this ~4 year old one from Jan 2009 - http://thethemefoundry.com/blog/optimize-apache-wordpress/ The article is pretty detailed and seems helpful, but I stumble even on the first step. My httpd.conf only has 2 loadmodule commands LoadModule fastinclude_module modules/mod_fastinclude.so LoadModule bwlimited_module modules/mod_bwlimited.so So I go total bust right there. Further, my httpd.conf says Direct modifications to the Apache configuration file may be lost upon subsequent regeneration of the configuration file. To have modifications retained, all modifications must be checked into the configuration system by running: /usr/local/cpanel/bin/apache_conf_distiller I am having trouble finding where to change the modules in WHM. Please can someone help me with updated guidelines on how to optimize Apache for WordPress? Many thanks! P.S. The WordPress installation also has WP Super Cache installed. P.P.S. I also have phpBB, OpenCart, and Menalto Gallery installed.

  Read the article

• How can I prevent a DDOS attack on Amazon EC2?

  - by cwd

  One of the servers I use is hosted on the Amazon EC2 cloud. Every few months we appear to have a DDOS attack on this sever. This slows the server down incredibly. After around 30 minutes, and sometimes a reboot later, everything is back to normal. Amazon has security groups and firewall, but what else should I have in place on an EC2 server to mitigate or prevent an attack? From similar questions I've learned: Limit the rate of requests/minute (or seconds) from a particular IP address via something like IP tables (or maybe UFW?) Have enough resources to survive such an attack - or - Possibly build the web application so it is elastic / has an elastic load balancer and can quickly scale up to meet such a high demand) If using mySql, set up mySql connections so that they run sequentially so that slow queries won't bog down the system What else am I missing? I would love information about specific tools and configuration options (again, using Linux here), and/or anything that is specific to Amazon EC2. ps: Notes about monitoring for DDOS would also be welcomed - perhaps with nagios? ;)

  Read the article

• How can I get Windows to apply its settings?

  - by Jouke van der Maas

  I have a computer with a major problem; it gives a blue screen when the login screen loads. I've been using this guide to troubleshoot the issue, and now I've run into a problem. I have determined the issue is not bad memory or a bad hard drive. According to the guide, this means the problem is in the OS. I've tried to follow the steps, but Windows (Vista SP1) somehow doesn't remember any changes. On every reboot, the computer is in exactly the same state it was in before. Any changes to system settings or files won't be recorded. As this means I can't check what is causing the problem, I can't fix my PC. Is there a way to find out what's causing this? Is it just a mode Windows goes into to protect itself, or is it some other problem? Anything to help troubleshoot will be of great help here. PS. I'm kind of new to this site. If I messed up, please tell me in the comments.

  Read the article

• XP - ping changes routing table?

  - by Corelgott

  Hey Folks, I have got a real strange behaviour with one of my XP-Sp3 machines. Setup: A Server in the lan (192.168.5.0) proviedes access to all roadwarriors in 10.8.0.0 The DCHP has a static route for all clients pronouncing 192.168.5.235 as gateway for 10.8.0.0 All Clients can ping & access the vpn-machines; everything works like a charm But one Xp-Sp3 is not willing to connect to them. It gets all the same routes as any other sytem in the lan and I trippel-checked - there are no static routes on this machine When I ping any 10.8.0.0 device from this machine, the first two packaged work like a charm; but the next two (and any package after them) fail and get lost. When I look back into the routing table: There is a new route; a special one just for the device I pinged, which points to the right gateway - but which wasn't there earlier... As Long as this route exists the machine can't ping anything on 10.8.0.0. But if I remove the route by hand: The next to ping packages work fine... Has anybody got an idea about that? Anybody every seen such a behaviour? Any hint / help / tip is greatly appreachiated! thx in advance Corelgott Ps: I attach an image of the cmd to clarify things - its in german, but reading a routing table shouldn't be that hard...

  Read the article

• Physical Debian to VMWare: vmware-converter, dd-image or otherwise?

  - by Dabu

  we have two debian Lenny production machines, both running larger commercial websites. Now these machines need to be moved, and in the process, they need to be virtualized to VMWare ESX. If you believe the internet information, there are several ways to accomplish this. The easiest for us would be to use our weekly dd backup where the whole disk, however, I have no experience with this kind of technology and if it is really possible. The second best way would be via an application on the source machine virtualizing it and generating an ESX compatible VM. However, the software is beta and unsupported, and after installation, nothing really works (the /etc/init.d/vmware-converter script doesn't actually do anything, start and stop reply with success messages, yet ps shows that there are no new processes). The worst way with the most work would be to install a new machine and set it up manually, copying files and databases as needed. This part is clear in it's execution, and my question(s) do not touch this. Is my 1st way possible? Has anyone done this yet, or better, has a page with instructions? Or is there a help page that explains how to correctly install, run and use the vmware-converter tool using a Debian installation (it's possible that I dod something wrong during installation already)? Thank you.

  Read the article

< Previous Page | 143 144 145 146 147 148 149 150 151 152 153 154  | Next Page >