Search Results

Search found 5123 results on 205 pages for 'gateway timeout'.

Page 148/205 | < Previous Page | 144 145 146 147 148 149 150 151 152 153 154 155  | Next Page >

  • iptables -P FORWARD DROP makes port forwarding slow

    - by Isaac
    I have three computers, linked like this: box1 (ubuntu) box2 router & gateway (debian) box3 (opensuse) [10.0.1.1] ---- [10.0.1.18,10.0.2.18,10.0.3.18] ---- [10.0.3.15] | box4, www [10.0.2.1] Among other things I want box2 to do nat and port forwarding, so that I can do ssh -p 2223 box2 to reach box3. For this I have the following iptables script: #!/bin/bash # flush iptables -F INPUT iptables -F FORWARD iptables -F OUTPUT iptables -t nat -F PREROUTING iptables -t nat -F POSTROUTING iptables -t nat -F OUTPUT # default default_action=DROP for chain in INPUT OUTPUT;do iptables -P $chain $default_action done iptables -P FORWARD DROP # allow ssh to local computer allowed_ssh_clients="10.0.1.1 10.0.3.15" for ip in $allowed_ssh_clients;do iptables -A OUTPUT -p tcp --sport 22 -d $ip -j ACCEPT iptables -A INPUT -p tcp --dport 22 -s $ip -j ACCEPT done # allow DNS iptables -A OUTPUT -p udp --dport 53 -m state \ --state NEW,ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -p udp --sport 53 -m state \ --state ESTABLISHED,RELATED -j ACCEPT # allow HTTP & HTTPS iptables -A OUTPUT -p tcp -m multiport --dports 80,443 -j ACCEPT iptables -A INPUT -p tcp -m multiport --sports 80,443 -j ACCEPT # # ROUTING # # allow routing echo 1 >/proc/sys/net/ipv4/ip_forward # nat iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE # http iptables -A FORWARD -p tcp --dport 80 -j ACCEPT iptables -A FORWARD -p tcp --sport 80 -j ACCEPT # ssh redirect iptables -t nat -A PREROUTING -p tcp -i eth1 --dport 2223 -j DNAT \ --to-destination 10.0.3.15:22 iptables -A FORWARD -p tcp --sport 22 -j ACCEPT iptables -A FORWARD -p tcp --dport 22 -j ACCEPT iptables -A FORWARD -p tcp --sport 1024:65535 -j ACCEPT iptables -A FORWARD -p tcp --dport 1024:65535 -j ACCEPT iptables -I FORWARD -j LOG --log-prefix "iptables denied: " While this works, it takes about 10 seconds to get a password promt from my ssh command. Afterwards, the connection is as responsive as could be. If I change the default policy for my FORWARD chain to "ACCEPT", then the password promt is there imediatly. I have tried analysing the logs, but I can not spot a difference in the logs for ACCEPT/DROP in my FORWARD chain. Also I have tried allowing all the unprivileged ports, as box1 uses thoses for doing ssh to box2. Any hints? (If the whole setup seems strange to you - the point of the exercise is to understand iptables ;))

    Read the article

  • Move sendmail from Fedora 1 to a different server ( fedora 12)

    - by tanieboy4u
    We have a sendmail server that also works as DHCP, DNS, and a gateway to our ISP. It has three network interfaces, one for our ISP ( static IP) and the other two is for LANS on different subnet. The hardware is quite old and we've been experiencing downtime due to hardware failures, so we have decided to upgrade the hardware and while at it upgrade the linux OS to Fedora 12. Were trying to do this with minimal downtime. We are planning to take these steps. Install New OS (Fedora 12) on the new server with 3 network interfaces. Install DHCP, BIND, Sendmail, SpamAssassin, MailScanner, Dovecot, Squirrelmail on the new server. Transfer settings from the old server to the new server. ( This is the hardest part that we know). For DHCP and DNS, we can just copy the dhcp leases and conf file and everything should work right? How do we go about moving the users/email accounts from the old server to the new one? Thanks for all your help!

    Read the article

  • Ipsec config problem // openswan

    - by user90696
    I try to configure Ipsec on server with openswan as client. But receive error - possible, it's auth error. What I wrote wrong in config ? Thank you for answers. #1: STATE_MAIN_I2: sent MI2, expecting MR2 003 "f-net" #1: received Vendor ID payload [Cisco-Unity] 003 "f-net" #1: received Vendor ID payload [Dead Peer Detection] 003 "f-net" #1: ignoring unknown Vendor ID payload [ca917959574c7d5aed4222a9df367018] 003 "f-net" #1: received Vendor ID payload [XAUTH] 108 "f-net" #1: STATE_MAIN_I3: sent MI3, expecting MR3 003 "f-net" #1: discarding duplicate packet; already STATE_MAIN_I3 010 "f-net" #1: STATE_MAIN_I3: retransmission; will wait 20s for response 003 "f-net" #1: discarding duplicate packet; already STATE_MAIN_I3 003 "f-net" #1: discarding duplicate packet; already STATE_MAIN_I3 003 "f-net" #1: discarding duplicate packet; already STATE_MAIN_I3 010 "f-net" #1: STATE_MAIN_I3: retransmission; will wait 40s for response 031 "f-net" #1: max number of retransmissions (2) reached STATE_MAIN_I3. Possible authentication failure: no acceptable response to our first encrypted message 000 "f-net" #1: starting keying attempt 2 of at most 3, but releasing whack other side - Cisco ASA. parameters for my connection on our Linux server : VPN Gateway 8.*.*.* (Cisco ) Phase 1 Exchange Type Main Mode Identification Type IP Address Local ID 4.*.*.* (our Linux server IP) Remote ID 8.*.*.* (VPN server IP) Authentication PSK Pre Shared Key Diffie-Hellman Key Group DH 5 (1536 bit) or DH 2 (1024 bit) Encryption Algorithm AES 256 HMAC Function SHA-1 Lifetime 86.400 seconds / no volume limit Phase 2 Security Protocol ESP Connection Mode Tunnel Encryption Algorithm AES 256 HMAC Function SHA-1 Lifetime 3600 seconds / 4.608.000 kilobytes DPD / IKE Keepalive 15 seconds PFS off Remote Network 192.168.100.0/24 Local Network 1 10.0.0.0/16 ............... Local Network 5 current openswan config : # config setup klipsdebug=all plutodebug="control parsing" protostack=netkey nat_traversal=no virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12 oe=off nhelpers=0 conn f-net type=tunnel keyexchange=ike authby=secret auth=esp esp=aes256-sha1 keyingtries=3 pfs=no aggrmode=no keylife=3600s ike=aes256-sha1-modp1024 # left=4.*.*.* leftsubnet=10.0.0.0/16 leftid=4.*.*.* leftnexthop=%defaultroute right=8.*.*.* rightsubnet=192.168.100.0/24 rightid=8.*.*.* rightnexthop=%defaultroute auto=add

    Read the article

  • Per client DNS server assignment using Pfsense

    - by Trix
    I have a network where pfsense is the gateway. There are two sets of clients that I want. One where there will be some restrictions to the network (example, IM being blocked) and one network where there are no restrictions. One easy way I thought about doing this was assigning the different domains different DNS servers. One set could use OpenDNS, the other could use Google's Public DNS. The set with OpenDNS would have the filter options on (using OpenDNS' dashboard, I can check block IM .... so I do not manually need to block login.oscar.aol.com, meebo.com, gmail chat ....etc). So the problem is the DHCP server looks like it will only assign a single set of DNS servers to clients. Is there a way to set a per client assignment? Is there a better way to obtain what I want to obtain. This is just a small home network. I do not need anything fancy, but I do need this functionality in one way or another.

    Read the article

  • Webmin / Virtualmin running php as www-data, is locked out of viewing .htaccess and writing

    - by Kirill
    I've asked this on the virtualmin forums, but haven't had any help from there. Recently, "something" happened and it seems that the apache service has gone a bit weird. What it does: it runs all apache traffic as www-data and sometimes spawns the php5-cgi process as www-data, this is a problem because all the domain users own their directories and default permissions don't let www-data write to these folders (file uploads are dead) or read .htaccess (permalinks are broken in wordpress). I've googled this for about a week straight now, tried pretty much everything I could find and achieved nothing. The only thing that I think might actually be the cause of all this is this page: http:// - i.imgur.com/NYW3x.png (got shut down by the spam filter) So I figured if I set it to "default", this might magically start working again, but all it does is "crash" apache (all websites timeout). I figure it's something to do with the "mpm" module or something, but I can't find anything relevant in the settings to modify for it to work. Can someone please point me in the right direction? System info: Webmin version 1.580 Kernel and CPU Linux 2.6.35.4-rscloud on x86_64 Virtualmin version 3.90.gpl GPL Ubuntu 10.04 LTS (Lucid) A couple screenshots of top http://i.imgur.com/U2DTK.png http://i.imgur.com/sNPKs.png

    Read the article

  • No internet connection using Edimax routers

    - by idan315
    I have two computers connected to a router, connected to my ADSL modem by PPPoE. One of those computrs use Windows XP, the other uses Windows 7. The computer using Windows 7 keeps getting limited or no connectivity, and I can't use it to connect to the internet. Connecting the computer to the modem without the router 'in the way' worked, and I was able to use the internet - which led me to believe that the problem is with my router. However, I have changed my router, and the problem persists. I am really lost on how to approach this problem. Possible leads: when I view the network information, I see that my computer is connected to 'Multiple Networks'. One of those is "Network 4" (probably my router), and the other is Unidentified network. I don't know how to make the "Unidentified Network" disappear, or why is it even there in the first place. When I try using "ipconfig", I have two default gateway IPs. The first is 0.0.0.0, and the second is the IP of my router (192.168.2.1). The first router was Edimax BR-6204Wg. The second one I've tried connecting is BR-6424n. Any ideas?

    Read the article

  • Metro apps crash on startup, driver or permissions issue?

    - by Vee
    After installing Win8 x64 RC, Metro apps worked correctly, but desktop OpenGL apps were slow and unresponsive. I installed the latest Win8 nVidia drivers, and the OpenGL apps started working correctly. At the same time, because of annoying permission messages, I changed the C:\ drive and all its files ownerships to my user, and gave it full permission. I restarted my pc after installing the drivers, and now Metro apps only show the splash screen, then crash. I tried installing other versions of the nVidia drivers, with the same result. My GPU is a GeForce GTX275. Is this a known problem with nVidia drivers? Or maybe changing the ownership of C:\ is the real problem? Thank you. More information (after looking in the event viewer) I've managed to find the problem and the error in the Event Viewer. I still cannot solve it. Here's the information I found by opening the Mail app and letting it crash: Log Name: Microsoft-Windows-TWinUI/Operational Source: Microsoft-Windows-Immersive-Shell Date: 07/06/2012 15.54.17 Event ID: 5961 Task Category: (5961) Level: Error Keywords: User: VEE-PC\Vittorio Computer: vee-pc Description: Activation of the app microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail for the Windows.Launch contract failed with error: The app didn't start.. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-Immersive-Shell" Guid="{315A8872-923E-4EA2-9889-33CD4754BF64}" /> <EventID>5961</EventID> <Version>0</Version> <Level>2</Level> <Task>5961</Task> <Opcode>0</Opcode> <Keywords>0x4000000000000000</Keywords> <TimeCreated SystemTime="2012-06-07T13:54:17.472416600Z" /> <EventRecordID>6524</EventRecordID> <Correlation /> <Execution ProcessID="3008" ThreadID="6756" /> <Channel>Microsoft-Windows-TWinUI/Operational</Channel> <Computer>vee-pc</Computer> <Security UserID="S-1-5-21-2753614643-3522538917-4071044258-1001" /> </System> <EventData> <Data Name="AppId">microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail</Data> <Data Name="ContractId">Windows.Launch</Data> <Data Name="ErrorCode">-2144927141</Data> </EventData> </Event> Found other stuff, this is another error that appears when opening a Metro app: Log Name: Application Source: ESENT Date: 07/06/2012 16.01.00 Event ID: 490 Task Category: General Level: Error Keywords: Classic User: N/A Computer: vee-pc Description: svchost (1376) SRUJet: An attempt to open the file "C:\Windows\system32\SRU\SRU.log" for read / write access failed with system error 5 (0x00000005): "Access is denied. ". The open file operation will fail with error -1032 (0xfffffbf8). Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="ESENT" /> <EventID Qualifiers="0">490</EventID> <Level>2</Level> <Task>1</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2012-06-07T14:01:00.000000000Z" /> <EventRecordID>11854</EventRecordID> <Channel>Application</Channel> <Computer>vee-pc</Computer> <Security /> </System> <EventData> <Data>svchost</Data> <Data>1376</Data> <Data>SRUJet: </Data> <Data>C:\Windows\system32\SRU\SRU.log</Data> <Data>-1032 (0xfffffbf8)</Data> <Data>5 (0x00000005)</Data> <Data>Access is denied. </Data> </EventData> </Event> After changing permissions again (adding Everyone and Creator Owner to System32), the "access denied to sru.log" error disappears, but this one appears in its place: Log Name: Application Source: Microsoft-Windows-Immersive-Shell Date: 07/06/2012 16.16.34 Event ID: 2486 Task Category: (2414) Level: Error Keywords: (64),Process Lifetime Manager User: VEE-PC\Vittorio Computer: vee-pc Description: App microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail did not launch within its allotted time. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-Immersive-Shell" Guid="{315A8872-923E-4EA2-9889-33CD4754BF64}" /> <EventID>2486</EventID> <Version>0</Version> <Level>2</Level> <Task>2414</Task> <Opcode>0</Opcode> <Keywords>0x2000000000000042</Keywords> <TimeCreated SystemTime="2012-06-07T14:16:34.616499600Z" /> <EventRecordID>11916</EventRecordID> <Correlation /> <Execution ProcessID="3008" ThreadID="6996" /> <Channel>Application</Channel> <Computer>vee-pc</Computer> <Security UserID="S-1-5-21-2753614643-3522538917-4071044258-1001" /> </System> <EventData> <Data Name="ApplicationId">microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail</Data> </EventData> </Event> Now I'm stuck. It tells me "Activation of app microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail failed with error: The app didn't start. See the Microsoft-Windows-TWinUI/Operational log for additional information." but I can't find the Microsoft-Windows-TWinUI/Operational log. I'm starting a bounty. I found the TWinUI/Operational log. It only tells me: Log Name: Microsoft-Windows-TWinUI/Operational Source: Microsoft-Windows-Immersive-Shell Date: 07/06/2012 16.28.57 Event ID: 5961 Task Category: (5961) Level: Error Keywords: User: VEE-PC\Vittorio Computer: vee-pc Description: Activation of the app microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail for the Windows.BackgroundTasks contract failed with error: The app didn't start.. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-Immersive-Shell" Guid="{315A8872-923E-4EA2-9889-33CD4754BF64}" /> <EventID>5961</EventID> <Version>0</Version> <Level>2</Level> <Task>5961</Task> <Opcode>0</Opcode> <Keywords>0x4000000000000000</Keywords> <TimeCreated SystemTime="2012-06-07T14:28:57.238140800Z" /> <EventRecordID>6536</EventRecordID> <Correlation /> <Execution ProcessID="3008" ThreadID="2624" /> <Channel>Microsoft-Windows-TWinUI/Operational</Channel> <Computer>vee-pc</Computer> <Security UserID="S-1-5-21-2753614643-3522538917-4071044258-1001" /> </System> <EventData> <Data Name="AppId">microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail</Data> <Data Name="ContractId">Windows.BackgroundTasks</Data> <Data Name="ErrorCode">-2144927141</Data> </EventData> </Event> I need to go deeper. I found a forum thread that told me to look for "DCOM" errors. I found this one related to the app crash "The server Microsoft.WindowsLive.Mail.wwa did not register with DCOM within the required timeout." Log Name: System Source: Microsoft-Windows-DistributedCOM Date: 07/06/2012 16.46.45 Event ID: 10010 Task Category: None Level: Error Keywords: Classic User: VEE-PC\Vittorio Computer: vee-pc Description: The server Microsoft.WindowsLive.Mail.wwa did not register with DCOM within the required timeout. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" /> <EventID Qualifiers="0">10010</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x8080000000000000</Keywords> <TimeCreated SystemTime="2012-06-07T14:46:45.586943800Z" /> <EventRecordID>2763</EventRecordID> <Correlation /> <Execution ProcessID="804" ThreadID="2364" /> <Channel>System</Channel> <Computer>vee-pc</Computer> <Security UserID="S-1-5-21-2753614643-3522538917-4071044258-1001" /> </System> <EventData> <Data Name="param1">Microsoft.WindowsLive.Mail.wwa</Data> </EventData> </Event>

    Read the article

  • openvpn TCP/UDP slow SSH/SMB performance

    - by Petr Latal
    I have question about strange behavior of my openVPN configuration on Debian lenny. I have 2 server configs (one proto tcp-server based and one proto udp based). ISP bandwidth is 7Mbit/7Mbit. When I uses proto tcp-server my download server rate is fine around 6,4 Mbit/s, but upload rate is about 3Mbit/s. When I uses proto udp, my download server rate is around 3Mbit/s and upload rate around 6,4Mbit/s. I tried to handle the MTU, MSSFIX and cipher on/off on server and client configs to synchronize rates, but without solution. Here is TCP based SERVER config: mode server tls-server port 1194 proto tcp-server dev tap0 ifconfig 11.10.15.1 255.255.255.0 ifconfig-pool 11.10.15.2 11.10.15.20 255.255.255.0 push "route 192.168.1.0 255.255.255.0" push "dhcp-option DNS 192.168.1.200" push "route-gateway 11.10.15.1" push "dhcp-option WINS 192.168.1.200" route-up /etc/openvpn/routeup.sh duplicate-cn ca /etc/openvpn/ca.crt cert /etc/openvpn/server.crt key /etc/openvpn/server.key dh /etc/openvpn/dh2048.pem log-append /var/log/openvpn.log status /var/run/vpn.status 10 user nobody group nogroup keepalive 10 120 comp-lzo verb 3 script-security 3 plugin /usr/lib/openvpn/openvpn-auth-pam.so system-auth persist-tun persist-key mssfix cipher BF-CBC Here is UDP based SERVER config: port 1194 proto udp dev tun0 local xx.xx.xx.xx server 11.10.15.0 255.255.255.0 ca /etc/openvpn/ca.crt cert /etc/openvpn/server.crt key /etc/openvpn/server.key dh /etc/openvpn/dh2048.pem log-append /var/log/openvpn.log status /var/run/vpn.status 10 user nobody group nogroup keepalive 10 120 comp-lzo verb 3 duplicate-cn script-security 3 plugin /usr/lib/openvpn/openvpn-auth-pam.so system-auth persist-tun persist-key tun-mtu 1500 mssfix 1212 client-to-client ifconfig-pool-persist ipp.txt Here is TCP/UDP based windows CLIENT config: remote xx.xx.xx.xx --socket-flags TCP_NODELAY tls-client port 1194 proto tcp-client #proto udp dev tap #dev tun pull ca ca.crt cert latis.crt key latis.key mute 0 comp-lzo adaptive verb 3 resolv-retry infinite nobind persist-key auth-user-pass auth-nocache script-security 2 mssfix cipher BF-CBC

    Read the article

  • Cisco SR520w FE - WAN Port Stops Working

    - by Mike Hanley
    I have setup a Cisco SR520W and everything appears to be working. After about 1-2 days, it looks like the WAN port stops forwarding traffic to the Internet gateway IP of the device. If I unplug and then plug in the network cable connecting the WAN port of the SR520W to my Comcast Cable Modem, traffic startings flowing again. Also, if I restart the SR520W, the traffic will flow again. Any ideas? Here is the running config: Current configuration : 10559 bytes ! version 12.4 no service pad no service timestamps debug uptime service timestamps log datetime msec no service password-encryption ! hostname hostname.mydomain.com ! boot-start-marker boot-end-marker ! logging message-counter syslog no logging rate-limit enable secret 5 <removed> ! aaa new-model ! ! aaa authentication login default local aaa authorization exec default local ! ! aaa session-id common clock timezone PST -8 clock summer-time PDT recurring ! crypto pki trustpoint TP-self-signed-334750407 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-334750407 revocation-check none rsakeypair TP-self-signed-334750407 ! ! crypto pki certificate chain TP-self-signed-334750407 certificate self-signed 01 <removed> quit dot11 syslog ! dot11 ssid <removed> vlan 75 authentication open authentication key-management wpa guest-mode wpa-psk ascii 0 <removed> ! ip source-route ! ! ip dhcp excluded-address 172.16.0.1 172.16.0.10 ! ip dhcp pool inside import all network 172.16.0.0 255.240.0.0 default-router 172.16.0.1 dns-server 10.0.0.15 10.0.0.12 domain-name mydomain.com ! ! ip cef ip domain name mydomain.com ip name-server 68.87.76.178 ip name-server 66.240.48.9 ip port-map user-ezvpn-remote port udp 10000 ip ips notify SDEE ip ips name sdm_ips_rule ! ip ips signature-category category all retired true category ios_ips basic retired false ! ip inspect log drop-pkt no ipv6 cef ! multilink bundle-name authenticated parameter-map type inspect z1-z2-pmap audit-trail on password encryption aes ! ! username admin privilege 15 secret 5 <removed> ! crypto key pubkey-chain rsa named-key realm-cisco.pub key-string <removed> quit ! ! ! ! ! ! crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 connect auto group EZVPN_GROUP_1 key <removed> mode client peer 64.1.208.90 virtual-interface 1 username admin password <removed> xauth userid mode local ! ! archive log config logging enable logging size 600 hidekeys ! ! ! class-map type inspect match-any SDM_AH match access-group name SDM_AH class-map type inspect match-any SDM-Voice-permit match protocol sip class-map type inspect match-any SDM_ESP match access-group name SDM_ESP class-map type inspect match-any SDM_EASY_VPN_REMOTE_TRAFFIC match protocol isakmp match protocol ipsec-msft match class-map SDM_AH match class-map SDM_ESP match protocol user-ezvpn-remote class-map type inspect match-all SDM_EASY_VPN_REMOTE_PT match class-map SDM_EASY_VPN_REMOTE_TRAFFIC match access-group 101 class-map type inspect match-any Easy_VPN_Remote_VT match access-group 102 class-map type inspect match-any sdm-cls-icmp-access match protocol icmp match protocol tcp match protocol udp class-map type inspect match-any sdm-cls-insp-traffic match protocol cuseeme match protocol dns match protocol ftp match protocol h323 match protocol https match protocol icmp match protocol imap match protocol pop3 match protocol netshow match protocol shell match protocol realmedia match protocol rtsp match protocol smtp extended match protocol sql-net match protocol streamworks match protocol tftp match protocol vdolive match protocol tcp match protocol udp class-map type inspect match-any L4-inspect-class match protocol icmp class-map type inspect match-all sdm-invalid-src match access-group 100 class-map type inspect match-all dhcp_out_self match access-group name dhcp-resp-permit class-map type inspect match-all dhcp_self_out match access-group name dhcp-req-permit class-map type inspect match-all sdm-protocol-http match protocol http ! ! policy-map type inspect sdm-permit-icmpreply class type inspect dhcp_self_out pass class type inspect sdm-cls-icmp-access inspect class class-default pass policy-map type inspect sdm-permit_VT class type inspect Easy_VPN_Remote_VT pass class class-default drop policy-map type inspect sdm-inspect class type inspect SDM-Voice-permit pass class type inspect sdm-cls-insp-traffic inspect class type inspect sdm-invalid-src drop log class type inspect sdm-protocol-http inspect z1-z2-pmap class class-default pass policy-map type inspect sdm-inspect-voip-in class type inspect SDM-Voice-permit pass class class-default drop policy-map type inspect sdm-permit class type inspect SDM_EASY_VPN_REMOTE_PT pass class type inspect dhcp_out_self pass class class-default drop ! zone security ezvpn-zone zone security out-zone zone security in-zone zone-pair security sdm-zp-in-ezvpn1 source in-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-ezpn1 source out-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-ezvpn-out1 source ezvpn-zone destination out-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-self-out source self destination out-zone service-policy type inspect sdm-permit-icmpreply zone-pair security sdm-zp-out-in source out-zone destination in-zone service-policy type inspect sdm-inspect-voip-in zone-pair security sdm-zp-ezvpn-in1 source ezvpn-zone destination in-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-self source out-zone destination self service-policy type inspect sdm-permit zone-pair security sdm-zp-in-out source in-zone destination out-zone service-policy type inspect sdm-inspect ! bridge irb ! ! interface FastEthernet0 switchport access vlan 75 ! interface FastEthernet1 switchport access vlan 75 ! interface FastEthernet2 switchport access vlan 75 ! interface FastEthernet3 switchport access vlan 75 ! interface FastEthernet4 description $FW_OUTSIDE$ ip address 75.149.48.76 255.255.255.240 ip nat outside ip ips sdm_ips_rule out ip virtual-reassembly zone-member security out-zone duplex auto speed auto crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 ! interface Virtual-Template1 type tunnel no ip address ip virtual-reassembly zone-member security ezvpn-zone tunnel mode ipsec ipv4 ! interface Dot11Radio0 no ip address ! encryption vlan 75 mode ciphers aes-ccm ! ssid <removed> ! speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root ! interface Dot11Radio0.75 encapsulation dot1Q 75 native ip virtual-reassembly bridge-group 75 bridge-group 75 subscriber-loop-control bridge-group 75 spanning-disabled bridge-group 75 block-unknown-source no bridge-group 75 source-learning no bridge-group 75 unicast-flooding ! interface Vlan1 no ip address ip virtual-reassembly bridge-group 1 ! interface Vlan75 no ip address ip virtual-reassembly bridge-group 75 bridge-group 75 spanning-disabled ! interface BVI1 no ip address ip nat inside ip virtual-reassembly ! interface BVI75 description $FW_INSIDE$ ip address 172.16.0.1 255.240.0.0 ip nat inside ip ips sdm_ips_rule in ip virtual-reassembly zone-member security in-zone crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 inside ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 75.149.48.78 2 ! ip http server ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ip nat inside source list 1 interface FastEthernet4 overload ! ip access-list extended SDM_AH remark SDM_ACL Category=1 permit ahp any any ip access-list extended SDM_ESP remark SDM_ACL Category=1 permit esp any any ip access-list extended dhcp-req-permit remark SDM_ACL Category=1 permit udp any eq bootpc any eq bootps ip access-list extended dhcp-resp-permit remark SDM_ACL Category=1 permit udp any eq bootps any eq bootpc ! access-list 1 remark SDM_ACL Category=2 access-list 1 permit 172.16.0.0 0.15.255.255 access-list 100 remark SDM_ACL Category=128 access-list 100 permit ip host 255.255.255.255 any access-list 100 permit ip 127.0.0.0 0.255.255.255 any access-list 100 permit ip 75.149.48.64 0.0.0.15 any access-list 101 remark SDM_ACL Category=128 access-list 101 permit ip host 64.1.208.90 any access-list 102 remark SDM_ACL Category=1 access-list 102 permit ip any any ! ! ! ! snmp-server community <removed> RO ! control-plane ! bridge 1 protocol ieee bridge 1 route ip bridge 75 route ip banner login ^CSR520 Base Config - MFG 1.0 ^C ! line con 0 no modem enable line aux 0 line vty 0 4 transport input telnet ssh ! scheduler max-task-time 5000 end I also ran some diagnostics when the WAN port stopped working: 1. show interface fa4 FastEthernet4 is up, line protocol is up Hardware is PQUICC_FEC, address is 0026.99c5.b434 (bia 0026.99c5.b434) Description: $FW_OUTSIDE$ Internet address is 75.149.48.76/28 MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, 100BaseTX/FX ARP type: ARPA, ARP Timeout 04:00:00 Last input 01:08:15, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/23/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 0 packets/sec 336446 packets input, 455403158 bytes Received 23 broadcasts, 0 runts, 0 giants, 37 throttles 41 input errors, 0 CRC, 0 frame, 0 overrun, 41 ignored 0 watchdog 0 input packets with dribble condition detected 172529 packets output, 23580132 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out 2. show ip route Gateway of last resort is 75.149.48.78 to network 0.0.0.0 C 192.168.75.0/24 is directly connected, BVI75 64.0.0.0/32 is subnetted, 1 subnets S 64.1.208.90 [1/0] via 75.149.48.78 S 192.168.10.0/24 is directly connected, BVI75 75.0.0.0/28 is subnetted, 1 subnets C 75.149.48.64 is directly connected, FastEthernet4 S* 0.0.0.0/0 [2/0] via 75.149.48.78 3. show ip arp Protocol Address Age (min) Hardware Addr Type Interface Internet 75.149.48.65 69 001e.2a39.7b08 ARPA FastEthernet4 Internet 75.149.48.76 - 0026.99c5.b434 ARPA FastEthernet4 Internet 75.149.48.78 93 0022.2d6c.ae36 ARPA FastEthernet4 Internet 192.168.75.1 - 0027.0d58.f5f0 ARPA BVI75 Internet 192.168.75.12 50 7c6d.62c7.8c0a ARPA BVI75 Internet 192.168.75.13 0 001b.6301.1227 ARPA BVI75 4. sh ip cef Prefix Next Hop Interface 0.0.0.0/0 75.149.48.78 FastEthernet4 0.0.0.0/8 drop 0.0.0.0/32 receive 64.1.208.90/32 75.149.48.78 FastEthernet4 75.149.48.64/28 attached FastEthernet4 75.149.48.64/32 receive FastEthernet4 75.149.48.65/32 attached FastEthernet4 75.149.48.76/32 receive FastEthernet4 75.149.48.78/32 attached FastEthernet4 75.149.48.79/32 receive FastEthernet4 127.0.0.0/8 drop 192.168.10.0/24 attached BVI75 192.168.75.0/24 attached BVI75 192.168.75.0/32 receive BVI75 192.168.75.1/32 receive BVI75 192.168.75.12/32 attached BVI75 192.168.75.13/32 attached BVI75 192.168.75.255/32 receive BVI75 224.0.0.0/4 drop 224.0.0.0/24 receive 240.0.0.0/4 drop 255.255.255.255/32 receive Thanks in advance, -Mike

    Read the article

  • Bridging Virtual Networking into Real LAN on a OpenNebula Cluster

    - by user101012
    I'm running Open Nebula with 1 Cluster Controller and 3 Nodes. I registered the nodes at the front-end controller and I can start an Ubuntu virtual machine on one of the nodes. However from my network I cannot ping the virtual machine. I am not quite sure if I have set up the virtual machine correctly. The Nodes all have a br0 interfaces which is bridged with eth0. The IP Address is in the 192.168.1.x range. The Template file I used for the vmnet is: NAME = "VM LAN" TYPE = RANGED BRIDGE = br0 # Replace br0 with the bridge interface from the cluster nodes NETWORK_ADDRESS = 192.168.1.128 # Replace with corresponding IP address NETWORK_SIZE = 126 NETMASK = 255.255.255.0 GATEWAY = 192.168.1.1 NS = 192.168.1.1 However, I cannot reach any of the virtual machines even though sunstone says that the virtual machine is running and onevm list also states that the vm is running. It might be helpful to know that we are using KVM as a hypervisor and I am not quite sure if the virbr0 interface which was automatically created when installing KVM might be a problem.

    Read the article

  • Cisco ASA intermittently fails to see traffic

    - by DrStalker
    users | Mikrotik -- Internet | ASA | ServerA and ServerB I'm trying to troubleshoot a problem with a new Cisco ASA 5505. The network design is as above - the Microtik is the existing router, ServerA and ServerB used to plug directly into it. ServerA has IP 10.30.1.10, ServerB has IP 10.30.1.11 The ASA is configured with no NAT, a "allow anything" firewall, and uses the microtik as its default gateway. In effect, it is currently a simple IP router; the firewall and VPN stuff will all come later once the basics are working. Th problem is access to ServerA and ServerB is erratic - sometimes it will work, sometimes it will fail. It can fail for either one of the servers only, or both. When it is working: The Mikrotik logs show ping packets being sent out over the proper interface The ASA logs show the incoming connections. When it is failing: The Mikrotik logs show ping packets being sent out over the proper interface The ASA logs show nothing reaching the ASA. This can fail for one server only (e.g.: the Mikrotik is putting out packets to 10.30.1.10 and 10.30.1.11, but the ASA is only seeing packets arrive destined for 10.30.1.11) It can fail for one source only (e.g.: ClientA on the users network can ping 10.30.1.11, but clientB cannot) The problem can also be seen from the mikrotik router itself; sometimes it can ping ServerA and ServerB, sometimes it can only ping one of them What could be causing this? I can't think of any possible cause that is intermittent and could explain why the problem may occur for one destination server and not others. edit: Link to ASA config

    Read the article

  • SNMPD running but not listening for connections at random

    - by Lukasz
    OS: CentOS release 5.7 (Final) Net-SNMP: net-snmp-5.3.2.2-14.el5_7.1 (from RPM) Periodically my NMS notifies me that SNMP has gone down on this machine. The service is restored in between 10 to 30 minutes. My NMS also pings and check SSH and those services are not affected during the SNMP outage. SNMPD log file shows that it is working and apparently receiving packets (either from local agents from 127.0.0.1 or from my NMS at 172.16.37.37) however attempting to snmpwalk locally or from the NMS system fails with a timeout. I have 7 of these servers running mixture of CentOS 5.7 and RHEL 5.7 with this specific version of Net-SNMP installed from RPM - none of them have this issue except this one. 5 of the machines (including the NMS system and this problem server) are in the same rack connected using one switch. Restarting SNMPD does not fix the issue - it clears up by itself eventually. Any suggestions where I can begin diagnosing the issue? It's a closed subnet so IPTables is not used. SNMPD config below: # Following entries were added by HP Insight Management Agents at # Tue May 15 10:58:17 CLT 2012 dlmod cmaX /usr/lib64/libcmaX64.so rwcommunity public 127.0.0.1 rocommunity public 127.0.0.1 rwcommunity 3adRabRu 172.16.37.37 rocommunity 3adRabRu 172.16.37.37 rwcommunity 3adRabRu 172.16.37.36 rocommunity 3adRabRu 172.16.37.36 trapcommunity callmetraps trapsink 172.16.37.37 callmetraps trapsink 172.16.37.36 callmetraps syscontact Lukasz Piwowarek syslocation Santiago, Chile # ---------------------- END -------------------- agentAddress udp:161 com2sec rwlocal default public com2sec rolocal default public com2sec subnet default 3adRabRu group rwv2c v2c rwlocal group rov2c v2c rolocal group rov2c v2c subnet view all included .1 access rwv2c "" any noauth exact all all none access rov2c "" any noauth exact all none none

    Read the article

  • Destination host unreachable - Windows Server 2008

    - by Doug
    Hi There, I'm working with a windows 2008 domain controller, which I'm having issues connecting to internet resources. A small bit of background, this is a 2008 domain controller that has been added into an existing Win 2k domain, with a goal of replacing the older computers. Both of the older controllers can still access internet resources, and so can all the clients. When I ping Google.ca from the new server, it does resolve to an ip address, but then says "Reply from 192.168.123.20: Destination host unreachable." I'm really at a lost now, I've checked and rechecked my ip configuration, the default gateway is my router, the primary DNS server is the my DC, and the secondary DNS is also my router. The DNS server on the domain has a forwarder added for the router as well. Everything on my local network works just fine, all my internal resources can be resolved. For the time being, I've stopped the Firewall service. I'm not 100% used to Server 2008 yet, but it might be a case of just missing something simple. Thanks for your time.

    Read the article

  • Destination host unreachable - Windows Server 2008

    - by Doug
    Hi There, I'm working with a windows 2008 domain controller, which I'm having issues connecting to internet resources. A small bit of background, this is a 2008 domain controller that has been added into an existing Win 2k domain, with a goal of replacing the older computers. Both of the older controllers can still access internet resources, and so can all the clients. When I ping Google.ca from the new server, it does resolve to an ip address, but then says "Reply from 192.168.123.20: Destination host unreachable." I'm really at a lost now, I've checked and rechecked my ip configuration, the default gateway is my router, the primary DNS server is the my DC, and the secondary DNS is also my router. The DNS server on the domain has a forwarder added for the router as well. Everything on my local network works just fine, all my internal resources can be resolved. For the time being, I've stopped the Firewall service. I'm not 100% used to Server 2008 yet, but it might be a case of just missing something simple. Thanks for your time.

    Read the article

  • How to update-grub on a system running overlayroot?

    - by mikepurvis
    We ship boxes configured with overlayroot, using the following overlayroot.conf: overlayroot=device:dev=/dev/sda6,timeout=20,recurse=0 Which produces the following mount configuration: $ mount overlayroot on / type overlayfs (rw,errors=remount-ro) /dev/sda5 on /media/root-ro type ext3 (ro,relatime,errors=continue,user_xattr,acl,barrier=1,data=ordered) /dev/sda6 on /media/root-rw type ext3 (rw,relatime,errors=continue,user_xattr,acl,barrier=1,data=ordered) /dev/sda1 on /boot type ext3 (rw) As you can see, three key physical partitions: sda1 is /boot, sda5 is a read-only "factory" root, and sda6 is a "user" root which can be wiped at any point to restore the machine to its original factory state. Now, the problem arises when update-grub is run for any reason: $ sudo update-grub [sudo] password for administrator: /usr/sbin/grub-probe: error: cannot find a device for / (is /dev mounted?). Understandable, since / is an overlayfs. The contents of /usr/sbin/update-grub are: #!/bin/sh set -e exec grub-mkconfig -o /boot/grub/grub.cfg "$@" With /usr/sbin/grub-mkconfig being the business part of things. But the actual problem is in /usr/sbin/grub-probe, called by grub-mkconfig, and grub-probe is a binary. So my question is, is there a parameter or whatever which can make grub-probe do the right thing in the face of / being an overlayfs? And secondly, is there a way to hack/patch that in so that the update-grub script just does the right thing? Thanks.

    Read the article

  • Drive XML returning Windows Volume Shadow Service Error

    - by Ssvarc
    I'm trying to image a SATA laptop hard drive, using DriveImageXML, that is attached to my computer via a USB adapter. I'm running Win7 Ultimate 64 bit. DriveXML is returning: Could not initialize Windows Volume Shadow Service (VSS). ERROR C:\Program Files (x86)\Runtime Software\Drivelmage XML\vss64.exe failed to start. ERROR TIMEOUT Make sure VSSVC.EXE is running in your task manager. Click Help for more information. VSSVC.EXE is running in Task Manager, as is VSS64.exe. Looking at the FAQ on the Runtime webpage this turned up: Please verify in Settings-Control Panel-Administrative Tools-Services that the following services are enabled: MS Software Shadow Copy Provider Volume Shadow Copy Also make sure you are able to stop and start these services. Possible reasons for VSS failures: For VSS to work, at least one volume in your computer must be NTFS. If you use only FAT drives, VSS will not function. The required NTFS volume does not need to be identical with the volume you want to image. You should make sure that VSSVC.EXE is running in your task manager. If the problems persist, registering "oleaut.dll" and "oleaut32.dll" using "regsvr32" might help. Both of those services are running and can be started and stopped without issue. Using "regsvr32" to register ""oleaut32.dll" returns successful, but "oleaut.dll" returns: The module "oleaut.dll" failed to load. Make sure the binary is stored at the specified path or debug it to check for problems with the binary or dependent .DLL files. The specified module could not be found. Some other information that might be relevant. Browsing to the drive is successful, but accessing certain folders returns an "access" error. Windows runs a permissions adder that adds the current user profile to the NFTS permissions. Could this be the cause of the issue? DriveImage XML is running as Administrator. Thoughts?

    Read the article

  • Cisco 891w multiple VLAN configuration

    - by Jessica
    I'm having trouble getting my guest network up. I have VLAN 1 that contains all our network resources (servers, desktops, printers, etc). I have the wireless configured to use VLAN1 but authenticate with wpa2 enterprise. The guest network I just wanted to be open or configured with a simple WPA2 personal password on it's own VLAN2. I've looked at tons of documentation and it should be working but I can't even authenticate on the guest network! I've posted this on cisco's support forum a week ago but no one has really responded. I could really use some help. So if anyone could take a look at the configurations I posted and steer me in the right direction I would be extremely grateful. Thank you! version 15.0 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname ESI ! boot-start-marker boot-end-marker ! logging buffered 51200 warnings ! aaa new-model ! ! aaa authentication login userauthen local aaa authorization network groupauthor local ! ! ! ! ! aaa session-id common ! ! ! clock timezone EST -5 clock summer-time EDT recurring service-module wlan-ap 0 bootimage autonomous ! crypto pki trustpoint TP-self-signed-3369945891 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-3369945891 revocation-check none rsakeypair TP-self-signed-3369945891 ! ! crypto pki certificate chain TP-self-signed-3369945891 certificate self-signed 01 (cert is here) quit ip source-route ! ! ip dhcp excluded-address 192.168.1.1 ip dhcp excluded-address 192.168.1.5 ip dhcp excluded-address 192.168.1.2 ip dhcp excluded-address 192.168.1.200 192.168.1.210 ip dhcp excluded-address 192.168.1.6 ip dhcp excluded-address 192.168.1.8 ip dhcp excluded-address 192.168.3.1 ! ip dhcp pool ccp-pool import all network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 dns-server 10.171.12.5 10.171.12.37 lease 0 2 ! ip dhcp pool guest import all network 192.168.3.0 255.255.255.0 default-router 192.168.3.1 dns-server 10.171.12.5 10.171.12.37 ! ! ip cef no ip domain lookup no ipv6 cef ! ! multilink bundle-name authenticated license udi pid CISCO891W-AGN-A-K9 sn FTX153085WL ! ! username ESIadmin privilege 15 secret 5 $1$g1..$JSZ0qxljZAgJJIk/anDu51 username user1 password 0 pass ! ! ! class-map type inspect match-any ccp-cls-insp-traffic match protocol cuseeme match protocol dns match protocol ftp match protocol h323 match protocol https match protocol icmp match protocol imap match protocol pop3 match protocol netshow match protocol shell match protocol realmedia match protocol rtsp match protocol smtp match protocol sql-net match protocol streamworks match protocol tftp match protocol vdolive match protocol tcp match protocol udp class-map type inspect match-all ccp-insp-traffic match class-map ccp-cls-insp-traffic class-map type inspect match-any ccp-cls-icmp-access match protocol icmp class-map type inspect match-all ccp-invalid-src match access-group 100 class-map type inspect match-all ccp-icmp-access match class-map ccp-cls-icmp-access class-map type inspect match-all ccp-protocol-http match protocol http ! ! policy-map type inspect ccp-permit-icmpreply class type inspect ccp-icmp-access inspect class class-default pass policy-map type inspect ccp-inspect class type inspect ccp-invalid-src drop log class type inspect ccp-protocol-http inspect class type inspect ccp-insp-traffic inspect class class-default drop policy-map type inspect ccp-permit class class-default drop ! zone security out-zone zone security in-zone zone-pair security ccp-zp-self-out source self destination out-zone service-policy type inspect ccp-permit-icmpreply zone-pair security ccp-zp-in-out source in-zone destination out-zone service-policy type inspect ccp-inspect zone-pair security ccp-zp-out-self source out-zone destination self service-policy type inspect ccp-permit ! ! crypto isakmp policy 1 encr 3des authentication pre-share group 2 ! crypto isakmp client configuration group 3000client key 67Nif8LLmqP_ dns 10.171.12.37 10.171.12.5 pool dynpool acl 101 ! ! crypto ipsec transform-set myset esp-3des esp-sha-hmac ! crypto dynamic-map dynmap 10 set transform-set myset ! ! crypto map clientmap client authentication list userauthen crypto map clientmap isakmp authorization list groupauthor crypto map clientmap client configuration address initiate crypto map clientmap client configuration address respond crypto map clientmap 10 ipsec-isakmp dynamic dynmap ! ! ! ! ! interface FastEthernet0 ! ! interface FastEthernet1 ! ! interface FastEthernet2 ! ! interface FastEthernet3 ! ! interface FastEthernet4 ! ! interface FastEthernet5 ! ! interface FastEthernet6 ! ! interface FastEthernet7 ! ! interface FastEthernet8 ip address dhcp ip nat outside ip virtual-reassembly duplex auto speed auto ! ! interface GigabitEthernet0 description $FW_OUTSIDE$$ES_WAN$ ip address 10...* 255.255.254.0 ip nat outside ip virtual-reassembly zone-member security out-zone duplex auto speed auto crypto map clientmap ! ! interface wlan-ap0 description Service module interface to manage the embedded AP ip unnumbered Vlan1 arp timeout 0 ! ! interface Wlan-GigabitEthernet0 description Internal switch interface connecting to the embedded AP switchport trunk allowed vlan 1-3,1002-1005 switchport mode trunk ! ! interface Vlan1 description $ETH-SW-LAUNCH$$INTF-INFO-FE 1$$FW_INSIDE$ ip address 192.168.1.1 255.255.255.0 ip nat inside ip virtual-reassembly zone-member security in-zone ip tcp adjust-mss 1452 crypto map clientmap ! ! interface Vlan2 description guest ip address 192.168.3.1 255.255.255.0 ip access-group 120 in ip nat inside ip virtual-reassembly zone-member security in-zone ! ! interface Async1 no ip address encapsulation slip ! ! ip local pool dynpool 192.168.1.200 192.168.1.210 ip forward-protocol nd ip http server ip http access-class 23 ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ! ! ip dns server ip nat inside source list 23 interface GigabitEthernet0 overload ip route 0.0.0.0 0.0.0.0 10.165.0.1 ! access-list 23 permit 192.168.1.0 0.0.0.255 access-list 100 remark CCP_ACL Category=128 access-list 100 permit ip host 255.255.255.255 any access-list 100 permit ip 127.0.0.0 0.255.255.255 any access-list 100 permit ip 10.165.0.0 0.0.1.255 any access-list 110 permit ip 192.168.0.0 0.0.5.255 any access-list 120 remark ESIGuest Restriction no cdp run ! ! ! ! ! ! control-plane ! ! alias exec dot11radio service-module wlan-ap 0 session Access point version 12.4 no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname ESIRouter ! no logging console enable secret 5 $1$yEH5$CxI5.9ypCBa6kXrUnSuvp1 ! aaa new-model ! ! aaa group server radius rad_eap server 192.168.1.5 auth-port 1812 acct-port 1813 ! aaa group server radius rad_acct server 192.168.1.5 auth-port 1812 acct-port 1813 ! aaa authentication login eap_methods group rad_eap aaa authentication enable default line enable aaa authorization exec default local aaa authorization commands 15 default local aaa accounting network acct_methods start-stop group rad_acct ! aaa session-id common clock timezone EST -5 clock summer-time EDT recurring ip domain name ESI ! ! dot11 syslog dot11 vlan-name one vlan 1 dot11 vlan-name two vlan 2 ! dot11 ssid one vlan 1 authentication open eap eap_methods authentication network-eap eap_methods authentication key-management wpa version 2 accounting rad_acct ! dot11 ssid two vlan 2 authentication open guest-mode ! dot11 network-map ! ! username ESIadmin privilege 15 secret 5 $1$p02C$WVHr5yKtRtQxuFxPU8NOx. ! ! bridge irb ! ! interface Dot11Radio0 no ip address no ip route-cache ! encryption vlan 1 mode ciphers aes-ccm ! broadcast-key vlan 1 change 30 ! ! ssid one ! ssid two ! antenna gain 0 station-role root ! interface Dot11Radio0.1 encapsulation dot1Q 1 native no ip route-cache bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding bridge-group 1 spanning-disabled ! interface Dot11Radio0.2 encapsulation dot1Q 2 no ip route-cache bridge-group 2 bridge-group 2 subscriber-loop-control bridge-group 2 block-unknown-source no bridge-group 2 source-learning no bridge-group 2 unicast-flooding bridge-group 2 spanning-disabled ! interface Dot11Radio1 no ip address no ip route-cache shutdown ! encryption vlan 1 mode ciphers aes-ccm ! broadcast-key vlan 1 change 30 ! ! ssid one ! antenna gain 0 dfs band 3 block channel dfs station-role root ! interface Dot11Radio1.1 encapsulation dot1Q 1 native no ip route-cache bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding bridge-group 1 spanning-disabled ! interface GigabitEthernet0 description the embedded AP GigabitEthernet 0 is an internal interface connecting AP with the host router no ip address no ip route-cache ! interface GigabitEthernet0.1 encapsulation dot1Q 1 native no ip route-cache bridge-group 1 no bridge-group 1 source-learning bridge-group 1 spanning-disabled ! interface GigabitEthernet0.2 encapsulation dot1Q 2 no ip route-cache bridge-group 2 no bridge-group 2 source-learning bridge-group 2 spanning-disabled ! interface BVI1 ip address 192.168.1.2 255.255.255.0 no ip route-cache ! ip http server no ip http secure-server ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag access-list 10 permit 192.168.1.0 0.0.0.255 radius-server host 192.168.1.5 auth-port 1812 acct-port 1813 key ***** bridge 1 route ip

    Read the article

  • OpenVPN Bridge LAN-to-LAN Configuration?

    - by Shad Reese
    I'm trying to configure an OpenVPN bridge LAN-to-LAN setup. Currently, I have the OpenVPN bridge Server/Client setup up running. On the server-side my br-lan interface has tap0, eth0, and wlan0 in the bridge group. On the client-side the br-lan interface has eth0 and wlan0 in the bridge group, the client tap0 is outside of the br-lan group. Currently the two bridge groups are connected via the wlanO interfaces (server-side is the Access Point - AP and the client-side is the wireless client). My goal is to connect the two bridge groups with a wireless VPN pipe. My network configuration: Server: br-lan: 10.4.96.50 Client: br-lan: 10.4.96.75 tap0: 10.4.96.100 <---- issued by the VPN server. Unfortunately, I'm stuck with using a bridge instead of a routed OpenVPN setup. My question is how (if possible) do I add the client tap0 interface to the client bridge group, as to ensure all traffic between the server/client bridge groups is using the VPN pipe? SERVER CONFIG FILE. config openvpn sample_server # Set to 1 to enable this instance: option enable 1 option port 1194 option proto udp option dev tap0 option key /etc/easy-rsa/keys/server.key option dh /etc/easy-rsa/keys/dh1024.pem option ifconfig_pool_persist /tmp/ipp.txt option server_bridge "10.4.96.50 255.255.255.0 10.4.96.100 10.4.96.200" list push "redirect-gateway local def1" list push "dhcp-option DNS 10.4.96.14" option duplicate_cn 1 option comp_lzo 1 option max_clients 100 option log /tmp/openvpn.log option verb 3 CLIENT CONFIG FILE: config 'openvpn' 'sample_client' option 'enable' '1' option 'client' '1' option 'dev' 'tap' option 'proto' 'udp' list 'remote' '10.4.96.50 1194' option 'status' /tmp/openvpn-status.log option 'log' /tmp/openvpn.log option 'ca' '/etc/easy-rsa/keys/ca.crt' option 'cert' '/etc/easy-rsa/keys/client.crt' option 'key' '/etc/easy-rsa/keys/client.key' option 'comp_lzo' '1' option 'verb' '5' Thanks in advance,

    Read the article

  • NSclient++ NRPE issues

    - by Kyle
    I have had NSclient++ working with Nagios for a while now. Recently I started testing Nagwin just to see how it would work, out of pure curiosity. I stopped checking a test server with my main Nagios config, set NSclient++ to NRPE mode, and pointed Nagwin at it. It worked great for a few hours then suddenly I started seeing "UNKNOWN: No Handler for that command." I figured it has to be Nagwin's fault since it's so new, I'll just unload NRPElistner.dll and return my server to being monitored by check_NT. However now check_NT doesn't work my main Nagios server returns timeout errors and is unable to connect at all. My Nagwin server can connect to it, the server just doesn't know how to handle the check_NRPE commands even though it did with no changes a few hours earlier. I have been working on this for a day now and am fairly certain it is NSclient++ who is to blame here. My nagwin box has successfully stayed connected to a similar server throughout the night, without any issues. And my main Nagios config is not having any problems at all. I have been able to successfully switch another server between being monitored by nagios and nagwin without any problems by simply loading and unloading the NRPE.dll. I have tried uninstalling NSclient++ and reinstalling with fresh configuration but still receive the errors. As of now the firewall is off on the server, NSclient++ is setup to accept connection from any server, there is no password, I have also turned ssl off, and the NRPE module is loaded. Any Ideas would be appreciated, I am not an advanced Nagios user but I do know my way around it and can easily break it down and set it up again. I also want to add that while in test mode NSclient++ is unable to handle check_NRPE commands there either.

    Read the article

  • A network-related or instance-specific error occurred while establishing a connection to SQL Server

    - by sf
    Hi, I'm getting the following error when trying to load an Asp.NET MVC App on IIS 7 with Sql Server 2008 Express. The App uses Linq to SQL. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) I've done some searching and all answers point to enabling TCP connections in Sql Server Configuration which I have done to no avail. The connection string I am using is: Server=SERVERNAME\SQLEXPRESS;Database=DBName;Integrated Security=true The catch. I have another app that already could talk to the Sql Server just fine. Even before playing around with the Sql Server Configuration Settings. The other app uses the following connectionstring: Data Source=SERVERNAME\SQLEXPRESS;Initial Catalog=OtherDbName;Integrated Security=True;Persist Security Info=False;Connect Timeout=120 I've tried this connectionstring on the app that isn't working and it still doesn't work. Please help. I think i'm about to go crazy

    Read the article

  • Boot ISO image from GRUB4DOS on EFI machines

    - by Vladimir Tikhomirov
    I failed with loading ISO image (non-distro) from GRUB2 from USB stick, but found the way how I can boot the GRUB4DOS and then load the image from there. However, it doesn't work all the time and the questions is WHY it doesn't? Environment and loading process: We need to have EFI machine, USB stick, booting ISO, GRUB2 and GRUB4DOS. Last 3 on USB stick. Boot: USB - EFI loader - GRUB2 - GRUB4DOS - ISO image Configuration files To boot GRUB4DOS I use this from grub.cfg: menuentry "image.iso" { linux /syslinux/grub.exe --config-file="/menu.lst" } My menu.lst is here: timeout 20 default 0 title image.iso find --set-root --ignore-floppies --ignore-cd //image.iso map --heads=0 --sectors-per-track=0 //image.iso (hd32) map --hook chainloader (hd32) This works perfectly with Legacy machines. However, when I come to GRUB4DOS, I don't see the menu with image.iso, I see only GRUB command line. That means that my menu.lst didn't load. Why is it like this? Background and ideas I have an idea that GRUB4DOS doesn't recognize my USB stick as a device. I tried the command find and got (hd0,0), (hd0,1), (hd0,2), (rd). When I tried to set root to any of these devices I don't see fat file system, how it was with Legacy machines. The root device is (hd0,0), which has ntfs file system which should be partition with Windows. EFI machines support only GRUB2, so I can't boot GRUB4DOS straight away. Please, don't suggest anything like this, because my image doesn't have kernel. You can imagine that you load HDAT2 or Hiren's boot cd, for example. menuentry "Blancco Blancco5.iso" { set isofile="/image.iso" loopback loop $isofile set root=(loop) linux /isolinux/vmlinuz isofile=$isofile splash quiet initrd /isolinux/initrd }

    Read the article

  • Migrating Windows XP BOOT.INI Settings to Windows 7 Boot-loader

    - by Synetech inc.
    Two months ago my motherboard died, so I bought a used computer that came with Windows 7. I have since installed my old hard-drive, which had Windows XP on it, in this system. What I am trying to do now is to figure out a way to migrate the settings from XP's BOOT.INI into 7's boot-loader. Below is the BOOT.INI I used in XP (I have reduced the strings and updated the disks to point to the new location of the old HD. Oh and I am not clear on the drive letters. In XP, I could boot the recovery console or MS-DOS from a file in C:\ that contains the boot-sector. I am not sure what drive letter it would be called now—I had to manually change all the drive letters of the old partitions in Windows 7 because it auto-assigned them all wrong/differently). [boot loader] timeout=10 default=multi(0)disk(0)rdisk(1)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="XP" /fastdetect multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="XP (Safe)" /safeboot:network /sos /bootlog /noguiboot C:\CMDCONS\BOOTSECT.DAT="Recovery Console" /cmdcons C:\BOOTSECT.DOS="MS-DOS 7.10" /win95 I have looked around, and have only been able to find some bcdedit commands to add XP to the boot-loader, but none that include information on setting safe-mode for it (or changing any of the XP load options for that matter). Not surprisingly I suppose, I have not found anything on adding the XP recovery console or DOS to the Windows 7 boot-loader. (Yes, I tried EasyBCD, but that did not help; it had no options for XP, and the best I managed was to get a choice of booting 7 or normal-mode XP—choosing XP didn't even give the old XP boot menu.) Can anyone please tell me how to export the entries in XP's boot.ini to 7's boot-loader so that on boot, I can choose to load the following: Windows 7 Windows 7 (Safe-mode) (Windows 7 (The Win7 counterpart of the Recovery Console)) Windows XP Windows XP (Safe-mode) Windows XP (Recovery Console) MS-DOS 7.10

    Read the article

  • Configure IPv6 routing

    - by godlark
    I've got IPv6 addresses from SIXXS. My host is connected with SIXXS network over a AICCU tunnel ("sixxs" interface). My host address is 2001:::2, the host on the end has address 2001:::1. On my host IPv6 is fully accessible. I have problem with configuring IPv6 network on VMs. I use VirtualBox, the VM (Ubuntu) uses tap1 (on the host bridged by br0) #!/bin/sh PATH=/sbin:/usr/bin:/bin:/usr/bin:/usr/sbin # create a tap tunctl -t tap1 ip link set up dev tap1 # create the bridge brctl addbr br0 brctl addif br0 tap1 # set the IP address and routing ip link set up dev br0 ip -6 route del 2001:6a0:200:172::/64 dev sixxs ip -6 route add 2001:6a0:200:172::1 dev sixxs ip -6 addr add 2001:6a0:200:172::2/64 dev br0 ip -6 route add 2001:6a0:200:172::2/64 dev br0 Host: routing table: 2001:6a0:200:172::1 dev sixxs metric 1024 2001:6a0:200:172::/64 dev br0 proto kernel metric 256 2001:6a0:200:172::/64 dev br0 metric 1024 2000::/3 dev sixxs metric 1024 fe80::/64 dev eth0 proto kernel metric 256 fe80::/64 dev sixxs proto kernel metric 256 fe80::/64 dev br0 proto kernel metric 256 fe80::/64 dev tap1 proto kernel metric 256 default via 2001:6a0:200:172::1 dev sixxs metric 1024 Guest: interface eth1 (it is connected with tap1): auto eth1 iface eth1 inet6 static address 2001:6a0:200:172::3 netmask 64 gateway 2001:6a0:200:172::2 Guest: routing table 2001:6a0:200:172::/64 dev eth1 proto kernel metric 256 fe80::/64 dev eth0 proto kernel metric 256 fe80::/64 dev eth1 proto kernel metric 256 default via 2001:6a0:200:172::2 dev eth1 metric 1024 The guest pings to the host, the host pings to the guest, the host pings to 2001:6a0:200:172::1, but the guest doesn't ping to 2001:6a0:200:172::1. The guest tries to ping, on the host (by tcdump) I can capture its packets, but the host doesn't send them to 2001:6a0:200:172::1. What have I missed in configuration?

    Read the article

  • Windows Server 2008 DHCP with RRAS

    - by Guillermo Prandi
    I have a Windows Server 2008 R2 which is a member of a domain, but is placed in a remote location. The server is directly connected to Internet. Clients need to access a particular insecure TCP service in this server (ports 9730 and 9731). Since clients have dynamic IP addresses I cannot know in advance, I thought it would be nice to have them connected through a VPN in order to access the insecure service, but ONLY to access that service, like this: Client ------> VPN TUNNEL ------> (Insecure service at Server) | \----> (Normal internet access) I'd enable the insecure ports in the firewall only from VPN accesses. For this I configured RRAS in the server and gave it a static IP address range (172.19.1.2 through 172.19.1.254) to serve the clients. First I thought I could use DHCP to assign the addresses, but I cannot use DHCP in my LAN connection (not allowed by the hosting service). I tried configuring DHCP binding it to a Microsoft Loopback Adapter, but that's not supported as a DHCP source by RRAS. What I want to accomplish is to send specific DHCP options to the client (network mask, routing table, etc.). In particular: Prevent the client from having the server as default router (without changing the client's "use default gateway in remote network"). Have it as a route for the server's internal RRAS address only (172.19.1.1). Prevent the client from using a 255.255.0.0 mask for the 172.19.x.x network (a 255.255.255.0 mask would be better). Can I do that with RRAS only? How? Currently, the only solution I can think of is to use DHCP in the LAN adapter, but filter DHCP packets so they don't reach the provider's network. However, I'm not sure if that will work. Any suggestions are welcomed! Guille

    Read the article

  • Catastrophic Failure opening ODBC via Citrix

    - by Joshdan
    We recently had our Citrix server crash unexpectedly. When it came back up, there was a new issue -- every ODBC connection fails with "Catastrophic Failure" (0x8000FFFF). The issue is limited to Citrix / ICA connections; logging in as the same user via RDP works as usual. The following code is my minimal test case (for wscript): ''// test_odbc.vbs strConn = "Driver={Microsoft Text Driver (*.txt; *.csv)};Dbq=c:\files\;" Set rs = CreateObject("ADODB.recordset") strSQL = "SELECT * FROM myFile.csv" wscript.echo "Press OK to Test" ''// This line breaks over Citrix, but not over Terminal Services ''// ---------------------- rs.open strSQL, strConn, 3,3 ''// ---------------------- wscript.echo rs("a") Any insight would be greatly appreciated. Windows Server 2003 SP1, Citrix MetaFrame Presentation Server 4.0. Clients include at least versions 10.2-11 running on 2000-Vista, OS X. ODBC error happens whether a DSN is used or not, on at least Access, MS-SQL, and CSV. Connections both through the SSL Gateway and directly. There have been a few users actually able to log in without trouble, but I can't pin down anything special about them.

    Read the article

< Previous Page | 144 145 146 147 148 149 150 151 152 153 154 155  | Next Page >