Search Results

Search found 8555 results on 343 pages for 'virtualbox networking'.

Page 148/343 | < Previous Page | 144 145 146 147 148 149 150 151 152 153 154 155  | Next Page >

  • How to set up multiple SSIDs with bandwidth limiting on a single wireless router?

    - by Rahul Narain
    I have an Asus WL-520GU wireless router connected to a cable modem that I use for wireless internet access in my apartment. I would like to set it up so that it provides two SSIDs: one secured and password-protected for my regular use, and a "guest" SSID that's unsecured but throttled to, say, 10% of the available bandwidth. What is the most straightforward way to do this? I've been looking into DD-WRT and Tomato, both of which support my router. DD-WRT supports setting up multiple SSIDs using the GUI, but I don't know if it's possible to limit the bandwidth of each SSID independently; point #12 in this FAQ thread says it's not possible to limit by day or by MAC address, which is discouraging but not conclusive. Tomato allows bandwidth limits in its QoS settings, going by the screenshot here, but multiple SSID support is still experimental and it doesn't look like it will work with the encryption settings or bandwidth limits in the GUI. I'd like to know a good way to do this which gives me the fewest opportunities for screwing up. I'm no stranger to the command line, if that turns out to be what's necessary, but if so, please explain what the commands are doing because I don't have a good mental model of what needs to happen to set this up.

    Read the article

  • Can't telnet to SQL Server

    - by Thiago
    Hi there, I have an SQL Server running on a computer, and I'm trying to access it from another computer in the same local network (potentially VPN, since it's located in a datacenter). The point is that I can't even telnet to the port in which SQL Server is listening. And yes, SQL Server is working, since I can telnet to it from my workstation. I think it's something in the host, since there's no hop between the two computers, but I don't know how to troubleshoot this. Basically I get a connection failed, when I try to telnet. What can cause such problem, since apparently there's no firewall and the server is accepting connections from other computers? Thanks in advance

    Read the article

  • wi-fi connection drops periodically for a few seconds

    - by sergiom
    I've read the similar question on wireless connections dropping, but no answer seems to apply to my case I have configured the wi-fi lan of my router to broadcast sid and use WPA-PSK. Every few minutes my wi-fi connection drops for a few seconds and then restores. When I use two computers and run a ping -n 50000 on both computers, I see that the connection drops at different times but with almost the same rate. the router is a zyxel, one pc runs windws vista and uses a USB wi-fi device from Belkin: F6D4050 the other one runs windows 7 is a Dell PC with an Intel(R) WiFi Link 5100 AGN there are no other wi-fi lans around

    Read the article

  • windows Home Server backup error

    - by domen
    I've finally built my WHS, but some other problems have showed up. I've googled, binged and searched SU with no success. The problem is following: at the moment I've got a Win7 laptop and Win7 PC, which should be backed up by the WHS. Laptop is backed up just fine with no issues, but when I try to manually backup the PC, after "backup is starting" message, when backup service should be monitoring changes on partitions, PC gets disconnected from the home network and thus, the backup process is stuck. Disabling/enabling network adapter gets PC back on the network. The only thing I've tried was reinstalling connector software. no success. Also, I've downloaded connector troubleshooter and only thing it says is "DHCP server was not found". I'm not good with networks, so I couldn't figure out what could that indicate (all computers in the network are assigned static IPs). Any ideas what the problem can be? I can provide any additional information, I'm just not sure what may be helpful right now. Thanks.

    Read the article

  • What Wireless Router/ADSL Modem to get? N-band a must!!

    - by JJarava
    I'm looking for a Dual-N band Router OR ADSL Gateway and I'd like some recommendations. Situation: I have a 802.11b/g ADSL gateway provided by my telco, but the WIFI signal won't cover all the house (especially the living-room, so my tv-connected Mac Mini has poor to no internet access). So I'm looking to either replace the DSL modem with a N-enabled one, or to add a Router to the mix. I've had a modem+router setup for many years, and I know the advantatges (double NAT, double FW = more security) and issues (more complex to troubleshoot, two possible points of failure), so I'd rather live with a single (ADSL Gateway) device, if possible. Requirements: Dual-N Band (300 Mbs WIFI) 1 GB Ethernet ports ADSL2+ support (if it's a ADSL gateway, which would be desirable) "Best" range and speed possible Nice to have: USB port to share disks/printers on the network Media streaming I've been a long time user of Linksys, so googling around I found the WRT610N (http://www.linksysbycisco.com/US/en/products/WRT610N) for a "Pure Router" perspective, and it's one of those that Linksys styles "N++" (http://www.linksysbycisco.com/US/en/promo/Promotion-Go-Wireless?stepname=Promotion-Step-Go-Wireless-High-Performance) But I haven't been able to find similar "ADSL" gateways. I've found the WAG320N, but there is little to no info in the Linksys site (i.e., i don't know if it's Dual Band, or if it has GB ethernet) Any opinions/recommendations of other products/suggestions are more than welcome.

    Read the article

  • Ip doesn't change when switching networks, although automatic ip is set. Cause of the issue known

    - by Julio Acevedo
    I have two routers at my house. Both of them have DCHP server enabled. One of them is 192.168.1.1 and gives adresses from 192.168.1.2 to 192.168.1.32 The other one is 192.168.1.50 and gives adresses from 192.168.1.51 to 192.168.1.99 The problem is that I only have internet access in one because my ip is 192.168.1.7, and when I switch to the other one, the ip remains 192.168.1.7, even though I have automatically get a ip adress in Ipv4. When I manually change my ip to one in the range allowed by the router, I can browse the internet. Any ideas how to solve this? Thank you.

    Read the article

  • Home-Router: Access internal server using external ip [migrated]

    - by user15863
    If I've got a typical home router -- say a Net Gear -- which has certain ports forwarded to a internal server, is there a way to tweak the router to let me access that internal server using the external IP address from within the same network? Is there a non-enterprise grade router that can handle this type of thing? In case that was strangely worded, let me re-phrase with an example. My external IP is 1.2.3.4. My internal server is 10.4.3.100 Port 1178 is being forwarded from the router to 10.4.3.100. I'd like to be able to be able to hit 10.4.3.100 from an internal ip of 10.4.3.10 by using the external ip of 1.2.3.4. Possible?

    Read the article

  • Why do I often have to refresh pages I navigate to once for them (or content in them) to load?

    - by GetOutOfBox
    I have noticed a bizarre pattern when using my PC, that when I open a link to a website, it often will often take a very long time to load, or time out. Sometimes content on the website will be drawn, but again, it seems to get "stuck" for an unusual amount of time before finishing. Most affected is Youtube; almost every time I navigate to a youtube video from another website such as Google, the video will not begin playing, but will instead just display the player controls with a black screen where the video should be and the buffering symbol, usually before displaying an error such as "The video failed to load". The unusual part of this problem is that whenever this happens, refreshing the page always causes it to load almost immediately the second time around, without any problems. Note that I'm not talking about how some browsers will dump whatever has been cached to the "pallet" briefly when the page is refreshed or loading stopped; but that the second time loading the website being faster. I have done my best to rule out some of the obvious causes: My Windows 7 desktop computer is the only device that seems to be affected. I use Firefox on it (latest version, flash updated, etc). My connection has more than enough bandwidth (30 megabits down, 4 up), and I've even tried QoSing all other devices to make sure this isn't happening due to usage spikes. Wireshark is not showing any clearly unusual network activity (i.e frequently dropped packets).

    Read the article

  • WPA Enterprise Wireless Bridge

    - by prestomation
    I live in college housing at a university with wifi available. unfortunately, my bedroom(where I'd like to place my PC) gets little to no reception. I'd like to place a router in the strongest spot and rebroadcast. I understand this can be done with DD-WRT/etc, but this particular network is WPA Enterprise with my own personal username/password. I can't find any concrete evidence that I can get my router to act as a repeater for this encryption. I don't currently have a router to test it on, otherwise this would be easy, I just don't want to buy a router if it will be worthless to me. Thanks for your help

    Read the article

  • snmptt not translating traps, even with translate_log_trap_oid=1

    - by mbrownnyc
    I am having some trouble configuring snmptt to properly translate snmp traps. The following is a problem: /etc/snmp/snmptt.conf reflects: EVENT fgFmTrapIfChange .1.3.6.1.4.1.12356.101.6.0.1004 "Status Events" Critical FORMAT $* EXEC /usr/local/nagios/libexec/eventhandlers/submit_check_result $r "snmp_traps" 2 "$O: $+*" "$*" SDESC Trap is sent to the managing FortiManager if an interface IP is changed Variables: 1: fnSysSerial 2: ifName 3: fgManIfIp 4: fgManIfMask EDESC when a trap is received, /var/log/messages reflects: Sep 6 12:07:32 SNMPMANAGERHOST snmptrapd[15385]: 2012-09-06 12:07:32 <UNKNOWN> [UDP: [192.168.100.2]:162->[192.168.100.31]]: #012.1.3.6.1.2.1.1.3.0 = Timeticks: (707253943) 81 days, 20:35:39.43 #011.1.3.6.1.6.3.1.1.4.1.0 = OID: .1.3.6.1.4.1.12356.101.6.0.1004 #011.1.3.6.1.4.1.12356.100.1.1.1.0 = STRING: FGTNNNNNNNNN #011.1.3.6.1.2.1.31.1.1.1.1.10 = STRING: internal4 #011.1.3.6.1.4.1.12356.101.6.2.1.0 = IpAddress: 192.168.65.100 #011.1.3.6.1.4.1.12356.101.6.2.2.0 = IpAddress: 255.255.255.0 Sep 6 12:07:37 SNMPMANAGERHOST icinga: EXTERNAL COMMAND: PROCESS_SERVICE_CHECK_RESULT; 192.168.100.2; snmp_traps; 2; enterprises.12356.101.6.0.1004: enterprises.12356.100.1.1.1.0:FGTNNNNNNNNN ifName.10:internal4 enterprises.12356.101.6.2.1.0:192.168.65.100 enterprises.12356.101.6.2.2.0:255.255.255.0 Since the icinga entry reflects the EXEC, it's obvious there is no translations occurring by snmptt. I have verified that translate_log_trap_oid and net_snmp_perl_enable is enabled in snmptt.ini When using --debug=1 to start snmptt, I see the following in the --debugfile: ********** Net-SNMP version 5.05 Perl module enabled ********** The main NET-SNMP version is reported as NET-SNMP version: 5.5. What else can be done to verify that snmptt is configured properly to translate traps? I have run snmptt-net-snmp-test to verify whatever net-snmp-perl version I have installed properly supports translations. The output indicates it does. /root/snmptt_1.3/snmptt-net-snmp-test --best_guess=2 SNMPTT Net-SNMP Test v1.0 (c) 2003 Alex Burger http://snmptt.sourceforge.net MIBS:RFC1213-MIB best_guess: 2 Testing translateObj ******************** Testing: .1.3.6.1.2.1.1.1, long_names=disabled, include_module=disabled Test passed. Result: sysDescr Testing: .1.3.6.1.2.1.1.1, long_names=disabled, include_module=enabled Test passed. Result: RFC1213-MIB::sysDescr Testing: .1.3.6.1.2.1.1.1, long_names=enabled, include_module=disabled Test passed. Result: .iso.org.dod.internet.mgmt.mib-2.system.sysDescr Testing: .1.3.6.1.2.1.1.1, long_names=enabled, include_module=enabled Test passed. Result: RFC1213-MIB::.iso.org.dod.internet.mgmt.mib-2.system.sysDescr Testing: sysDescr, long_names=disabled, include_module=disabled Test passed. Result: .1.3.6.1.2.1.1.1 Testing: RFC1213-MIB::sysDescr, long_names=disabled, include_module=disabled Test passed. Result: .1.3.6.1.2.1.1.1 Testing: system.sysDescr, long_names=disabled, include_module=disabled Test passed. Result: .1.3.6.1.2.1.1.1 Testing: RFC1213-MIB::system.sysDescr, long_names=disabled, include_module=disabled Test passed. Result: .1.3.6.1.2.1.1.1 Testing: .iso.org.dod.internet.mgmt.mib-2.system.sysDescr, long_names=disabled, include_module=disabled Test passed. Result: .1.3.6.1.2.1.1.1 Testing getType *************** Testing: .1.3.6.1.2.1.4.1 Test passed. Result: INTEGER Testing: ipForwarding Test passed. Result: INTEGER Testing Description ******************* Test passed. Result: ------------------------------------------------- The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP gateways forward datagrams. IP hosts do not (except those source-routed via the host). Note that for some managed nodes, this object may take on only a subset of the values possible. Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to change this object to an inappropriate value. ------------------------------------------------- I have manually gone through the MIB with the definition that's not resolving, and verified that it is properly linking back to the proper resolved definition. It is: FORTINET-FORTIGATE-MIB.txt contains: fgFmTrapIfChange NOTIFICATION-TYPE OBJECTS { fnSysSerial, ifName, fgManIfIp, fgManIfMask } STATUS current DESCRIPTION "Trap is sent to the managing FortiManager if an interface IP is changed" ::= { fgFmTrapPrefix 1004 } fgFmTrapPrefix OBJECT IDENTIFIER ::= { fgMgmt 0 } fgMgmt OBJECT IDENTIFIER ::= { fnFortiGateMib 6 } fnFortiGateMib ::= { fortinet 101 } IMPORTS FnBoolState, FnIndex, fnAdminEntry, fnSysSerial, fortinet FROM FORTINET-CORE-MIB fortinet MODULE-IDENTITY ::= { enterprises 12356 } LOOKS GOOD!!!!! 1.3.6.1.4.1.12356.101.6.0.1004 I've exhausted all the documentation and even posted fruitlessly in the snmptt-users mailing list. I can not prove it is the MIB. Why would snmptt fail to translate traps? Thanks, Matt

    Read the article

  • homegroup administrator user no longer exists

    - by Beninja
    I had a PC with windows 7 that was the homegroup administrator for my network. I recently upgraded to windows 8 I went to homegroup in control panel and saw that the original homegroup was never removed. It says to talk to the administrator on and obtain the password to join the homegroup. I need to create a new homegroup but I cant unless I somehow remove the old one. And I cant do that because the user that had rights to the old one no longer exists. Please help!! Ben

    Read the article

  • How should I isolate computers with different roles on a network

    - by fishhead
    I work in an industrial plant and we have one network(physical wire) that us used for both office usage and for process systems. The office computers are only used for typical office needs but occasionally do connect to the process computers to obtain information from a sql server or for some other purpose. A new initiative is in the works and is rolling down hill from corporate and that is to standardize how the the computers are used at work and they would be severely locked down and only a standard set of applications will be allowed to execute. one of the requirements is to also have non office computers isolated from the company domain. our non-office computers are a mix of Man-Machine interfaces and sql-servers all running software that non standard. My question is, how can we divorce the control systems computers from the company domain but still have access to the servers from the company domain. thanks

    Read the article

  • How should I isolate computers with different roles on a network

    - by fishhead
    I work in an industrial plant and we have one network(physical wire) that us used for both office usage and for process systems. The office computers are only used for typical office needs but occasionally do connect to the process computers to obtain information from a sql server or for some other purpose. A new initiative is in the works and is rolling down hill from corporate and that is to standardize how the the computers are used at work and they would be severely locked down and only a standard set of applications will be allowed to execute. one of the requirements is to also have non office computers isolated from the company domain. our non-office computers are a mix of Man-Machine interfaces and sql-servers all running software that non standard. My question is, how can we divorce the control systems computers from the company domain but still have access to the servers from the company domain. thanks

    Read the article

  • Router recommendation to virtualize 800 IPs

    - by delerious010
    I've recently been looking at getting some new load balancers for our environment as we are expecting to double our client base in the next 12 months. Currently we have 400 public IPS serving 800 clusters ( 2 clusters / IP due to ports ) on Coyote Point Balancers, and distributing connections to 3 web servers serving about 6GBytes outgoing, 2Gbytes in per day. If we double, this would be about 800 IPs, possibly 1600 clusters, and about 6 servers per cluster ( for a total of 9600 so called "real servers" using Barracuda's lingo ). Due to the amount of clusters, most solutions I've looked at ( Coyote, Barracuda, Loadbalancer.org ) seem to be unsure whether they'll be able to handle our planned growth, mostly due to health checks performed on the servers ... which makes total sense when you think of it. So the fine folk at loadbalancer.org recommended that we may be better off offload the 400-800 public IPs, which we require for SSL eCommerce solutions, over to a forward facing router. From that point on, the router could do some mangling to route EXT_IP:443 to INT_IP:INT_PORT which would then allow us to reduce the Load Balancer configuration to 1 or 2 clusters, thus resolving the health check problem. Does this idea make sense to yall ? Or would you have other recommendations to make ? Secondly, what router would you recommend for such an undertaking ? I'd be looking at something that has some form of failover mechanism built in. On a totally unrelated note, I've got to admit that I'm extremely pleased with the responses I got from loadbalancer.org. Their responses to my inquiries were surprisingly helpful ( i.e. I didn't feel as if I was taking to a sales guy trying to push something ). ( No I don't work for them, and sadly nor are they sending me free gear ).

    Read the article

  • Just LB or also Web Servers in Demilitarized Zone?

    - by Bradford
    In a load balanced environment, is it necessary to have all of the web servers in the DMZ? Or will just having the Load Balancer in the DMZ achieve the desired security? If it matters, the web server and application server are the same -- GF, Tomcat fronted by httpd on the same server, OAS, etc... LB - WEB/APPLICATION - DB Also, would the setup be different if it was LB - Web Server - Application Server - DB Thanks, Bradford

    Read the article

  • Why DELL PowerConnect and Juniper are so rare ? Why do enterprises stick with Cisco ?

    - by Kedare
    Hello ! I have a little question, I'm actually studing IT in France, and when looking on alternative on the very [...] very expensive Cisco equipments, I've found Juniper and DELL PowerConnect pretty attractive on features and price, but I rarely see something else than the classics Cisco/LinkSys, HP Procurve and Netgear.. Why it's so rare to find those switch ? They looks really great but... I've never seen any Juniper or Powerconnect... Why do enterprises stick with the expensive Cisco ? I've tried to find how to buy both, it's quite easy with PowerConnect, everything is on the DELL website, but it looks it's very hard to find Juniper equipments in France :( Thank you !

    Read the article

  • Can't connect to wireless-n in dual mode.

    - by Tyllyn
    I recently purchased a Acer Aspire Revo AR3610-U9022. This little nettop uses a Atheros AR5B91 Wireless Network Adapter. I also have a Netgear RangeMax NEXT Wireless Route (model WNDR3300). I have been using this router in dual mode (11G and 11N) on my normal desktop without a problem (Mode: Up to 270Mbps at 5GHz & 54Mbps at 2.4 GHz), but doing this, my Revo won't detect the 11N network as being around... my desktop still does, but the Revo, nope... just the 11G. However, when I switch my router over to just "Up to 270Mbps at 2.4GHz", it kills the 11G entirely, but the Revo recognizes the 11N network. I'm a programmer by trade, and this hardware-y stuff confuses me more than it should. Is there any way that I could set this stuff up so my Revo can connect to the 11N part of my router, but keep the 11G around? :) Thanks!

    Read the article

  • Debugging IO limitation

    - by Martin F
    I have a Fedora box with some severe IO limitations which I have no idea how to debug. The server has a Areca Technology Corp. ARC-1130 12-Port PCI-X to SATA RAID Controller with 12 7200 RPM 1.5 TB disks and a Marvell Technology Group Ltd. 88E8050 PCI-E ASF Gigabit Ethernet Controller. uname -a output: 2.6.32.11-99.fc12.x86_64 #1 SMP Mon Apr 5 19:59:38 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux The server is a file server running Nginx with the stub status module enabled, so I can see the current amount of connections. The problem present itself when I have a high number of simultaneous connections in a writing state. Usually around 350, at this very moment it's at 590 and the server is almost unusable and stuck at 230mbit/s. If I run stop and hit 1 to see CPU core usages I have all 4 cores with around 99% io wait, if I run iotop the nginx workers are the only processes producing any read load, currently at around 25MB/s. I have each of the workers bound to their own core. Initially I figured it was just the disks being bugged. But I've run fscheck and smartmontools checks and found no errors. I also ran an iozone test which you can see the result of here: http://www.pastie.org/951667.txt?key=fimcvljulnuqy2dcdxa Additionally, when the amount of connections are low I have no problem getting a good speed. If I wget over the local network it easily hits 60MB/sec. Right now I just tried putting a file in /dev/shm, then I symlinked a file from the public dir to it and used wget over the local network and only got 50KB/s. Also, if I try to cp /dev/shm/test /root/test it quickly copies around 740MB and then slows down HEAVILY. Again with iotop reporting 99% iowait. I'm not really sure how to go about figuring out what the problems are. It could be a natural disk limitation but then the file from /dev/shm ought to transfer so it seems there's a network limit, but that's fine when there's not many connections. Perhaps it's a TCP stack problem but I really have no idea how to check that. Any suggestions on how to proceed with debugging would be very welcome. If additional information is required then let me know and I'll try to get it. Thanks.

    Read the article

  • Mac claims to have connected to wireless network, but hasn't

    - by Mick
    I am attempting to connect a new mac OSX 10.6.5 laptop to a wireless network (I am a windows expert but a mac novice). It used to connect without problem to the network when I had the security set to "64 bit wep". Now I have changed the security on my belkin router to "WPA-PSK (no server)". I have two PC's and an old mac connecting via the new security setting without problem. Now I have the problem that on the new mac, the wireless icon is indicating a good connection (5 dark bars). Also the network name has a tick next to it on the wireless drop down menu. But I can not view any websites. I can not even connect to the router by typing 192.168.2.1 into a browser address bar. Any ideas where I went wrong?

    Read the article

  • Shared firewall or multiple client specific firewalls?

    - by Tauren
    I'm trying to determine if I can use a single firewall for my entire network, including customer servers, or if each customer should have their own firewall. I've found that many hosting companies require each client with a cluster of servers to have their own firewall. If you need a web node and a database node, you also have to get a firewall, and pay another monthly fee for it. I have colo space with several KVM virtualization servers hosting VPS services to many different customers. Each KVM host is running a software iptables firewall that only allows specific ports to be accessed on each VPS. I can control which ports any given VPS has open, allowing a web VPS to be accessed from anywhere on ports 80 and 443, but blocking a database VPS completely to the outside and only allowing a certain other VPS to access it. The configuration works well for my current needs. Note that there is not a hardware firewall protecting the virtualization hosts in place at this time. However, the KVM hosts only have port 22 open, are running nothing except KVM and SSH, and even port 22 cannot be accessed except for inside the netblock. I'm looking at possibly rethinking my network now that I have a client who needs to transition from a single VPS onto two dedicated servers (one web and one DB). A different customer already has a single dedicated server that is not behind any firewall except iptables running on the system. Should I require that each dedicated server customer have their own dedicated firewall? Or can I utilize a single network-wide firewall for multiple customer clusters? I'm familiar with iptables, and am currently thinking I'll use it for any firewalls/routers that I need. But I don't necessarily want to use up 1U of space in my rack for each firewall, nor the power consumption each firewall server will take. So I'm considering a hardware firewall. Any suggestions on what is a good approach?

    Read the article

  • DL380 G7: Not able to access ILO on DL380 via ssh from a client

    - by user117140
    I have problem where I can't access my ILO(ssh to ILO IP) thru client which is in different network.I am able to ping ILO IP thru this clinet but ssh access is not possible. Is it possible to have ssh to ILO IP from a client which is in different network? FYI, from the same client I can do ssh to server application IP but ssh to this server ILO IP is not possible. Kindly help? Some more info added: ILO IP address is 10.247.172.70 and its VLAN is different than Client VLAN. Client IP address is 10.247.167.80. ping to ILO IP from this client is possible but not ssh. I can do ssh to ILO IP if I try to do it from the server(hostname:node1) having ILO port or from the other node of this cluster itself,So ssh login is enabled. [root@node1 ~]$ssh -v 10.247.173.70 OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to 10.247.173.70 [10.247.173.70] port 22. [root@node1 ~]$ping 10.247.173.70 PING 10.247.173.70 (10.247.173.70) 56(84) bytes of data. 64 bytes from 10.247.173.70: icmp_seq=1 ttl=254 time=0.283 ms 64 bytes from 10.247.173.70: icmp_seq=2 ttl=254 time=0.344 ms 64 bytes from 10.247.173.70: icmp_seq=3 ttl=254 time=0.324 ms 64 bytes from 10.247.173.70: icmp_seq=4 ttl=254 time=0.367 ms

    Read the article

< Previous Page | 144 145 146 147 148 149 150 151 152 153 154 155  | Next Page >