Search Results

Search found 16491 results on 660 pages for 'root node'.

Page 149/660 | < Previous Page | 145 146 147 148 149 150 151 152 153 154 155 156  | Next Page >

• How to set up IP forwarding on Nexenta (Solaris)?

  - by Gleb

  I am trying to set up IP forwarding on my Nexenta box: root@hdd:~# uname -a SunOS hdd 5.11 NexentaOS_134f i86pc i386 i86pc Solaris The box has 2 network interfaces: root@hdd:~# ifconfig -a lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 e1000g1: flags=1001100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4,FIXEDMTU> mtu 1500 index 2 inet 192.168.12.2 netmask ffffff00 broadcast 192.168.12.255 ether 68:5:ca:9:51:b8 myri10ge0: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 9000 index 3 inet 10.10.10.10 netmask ffffff00 broadcast 10.10.10.255 ether 0:60:dd:47:87:2 lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1 inet6 ::1/128 192.168.12.0 is my normal LAN with 192.168.12.1 being the firewall/gateway 10.10.10.0 is a separate LAN for iSCSI (with no internet access) I want to set up IP forwarding so that a computer on 10.10.10.0 will be able to access the internet by using 10.10.10.10 as a gateway (I don't need any port forwarding) I have turned on IP forwarding: root@hdd:~# routeadm Configuration Current Current Option Configuration System State --------------------------------------------------------------- IPv4 routing disabled disabled IPv6 routing disabled disabled IPv4 forwarding enabled enabled IPv6 forwarding disabled disabled Routing services "route:default ripng:default" Routing daemons: STATE FMRI disabled svc:/network/routing/rdisc:default disabled svc:/network/routing/route:default disabled svc:/network/routing/legacy-routing:ipv4 disabled svc:/network/routing/legacy-routing:ipv6 disabled svc:/network/routing/ripng:default online svc:/network/routing/ndp:default But when I dry to start ipnat, I get an error: root@hdd:~# ipnat -CF -f /etc/ipf/ipnat.conf ioctl(SIOCGNATS): I/O error Here is the config: root@hdd:~# cat /etc/ipf/ipnat.conf #!/sbin/ipnat -f - # map e1000g1 10.10.10.10/24 -> 192.168.12.2/32 So the question is how to fix this.. Thanks in advance!

  Read the article

• install yum on fedora core 6

  - by Thomas

  hi, I have installed yum through rpm -ivh yum-3.0-6.noarch.rpm. The result came as [root@02e7709 ~]# rpm -ivh yum-3.0-6.noarch.rpm Preparing... ########################################### [100%] package yum-3.0-6 is already installed I used this To query a RPM package, using the command: [root@02e7709 ~]# rpm -q yum-3.0-6.noarch.rpm Reply as follows: [root@02e7709 ~]# rpm -q yum-3.0-6.noarch.rpm package yum-3.0-6.noarch.rpm is not installed both give different reply. But yum not installed I think. Whats the problem here package yum-3.0-6.noarch.rpm is not installed I used yum install subversion This follows [root@02e7709 ~]# yum install subversion Loading "installonlyn" plugin Setting up Install Process Setting up repositories core 100% |=========================| 1.1 kB 00:00 rpmforge 100% |=========================| 1.1 kB 00:00 Error: Cannot find a valid baseurl for repo: updates What is the error baseurl for repo?

  Read the article

• Completely reset mysql server authentication

  - by p3dro-sola

  I was trying to change the password for a user on a mysql server, and i appear to have locked myself out. I have access to the root user, but root doesn't have the privileges to access any databses, including the 'mysql' database where all the config is kept. Is there any way i can 'reset' the root user? (i have full file-system access) ... or do i just need to reinstall (can i salvage my data?) Thanks. -Ped

  Read the article

• How to setup nginx and a subdomain

  - by Evolutio

  i have gitlab installed on my server and it works on all domains eg: git.lars-dev.de, lars-dev.de and *.lars-dev.de how I can run gitlab only on git.lars-dev.de and another subdomain on files.lars-dev.de? my lars-dev conf: server { listen *:80; ## listen for ipv4; this line is default and implied #listen [::]:80 default_server ipv6only=on; ## listen for ipv6 root /var/www/webdata/lars-dev.de/htdocs; index index.html index.htm; server_name lars-dev.de; location / { try_files $uri $uri/ /index.html; } #error_page 500 502 503 504 /50x.html; #location = /50x.html { # root /usr/share/nginx/www; #} # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # #location ~ /\.ht { # deny all; #} } and the gitlab configuration: upstream gitlab { server unix:/home/git/gitlab/tmp/sockets/gitlab.socket; } server { listen *:80; # e.g., listen 192.168.1.1:80; In most cases *:80 is a good idea server_name git.lars-dev.de; # e.g., server_name source.example.com; server_tokens off; # don't show the version number, a security best practice root /home/git/gitlab/public; # individual nginx logs for this gitlab vhost access_log /var/log/nginx/gitlab_access.log; error_log /var/log/nginx/gitlab_error.log; location / { # serve static files from defined root folder;. # @gitlab is a named location for the upstream fallback, see below try_files $uri $uri/index.html $uri.html @gitlab; } # if a file, which is not found in the root folder is requested, # then the proxy pass the request to the upsteam (gitlab unicorn) location @gitlab { proxy_read_timeout 300; # https://github.com/gitlabhq/gitlabhq/issues/694 proxy_connect_timeout 300; # https://github.com/gitlabhq/gitlabhq/issues/694 proxy_redirect off; proxy_set_header X-Forwarded-Proto $scheme; proxy_set_header Host $http_host; proxy_set_header X-Real-IP $remote_addr; proxy_pass http://gitlab; } }

  Read the article

• How to combine try_files and sendfile on Nginx?

  - by hcalves

  I need Nginx to serve a file relative from document root if it exists, then fallback to an upstream server if it doesn't. This can be accomplished with something like: server { listen 80; server_name localhost; location / { root /var/www/nginx/; try_files $uri @my_upstream; } location @my_upstream { internal; proxy_pass http://127.0.0.1:8000; } } Fair enough. The problem is, my upstream is not serving the contents of URI directly, but instead, returning X-Accel-Redirect with a location relative to document root (it generates this file on-the-fly): % curl -I http://127.0.0.1:8000/animals/kitten.jpg__100x100__crop.jpg HTTP/1.0 200 OK Date: Mon, 26 Nov 2012 20:58:25 GMT Server: WSGIServer/0.1 Python/2.7.2 X-Accel-Redirect: animals/kitten.jpg__100x100__crop.jpg Content-Type: text/html; charset=utf-8 Apparently, this should work. The problem though is that Nginx tries to serve this file from some internal default document root instead of using the one specified in the location block: 2012/11/26 18:44:55 [error] 824#0: *54 open() "/usr/local/Cellar/nginx/1.2.4/htmlanimals/kitten.jpg__100x100__crop.jpg" failed (2: No such file or directory), client: 127.0.0.1, server: localhost, request: "GET /animals/kitten.jpg__100x100__crop.jpg HTTP/1.1", upstream: "http://127.0.0.1:8000/animals/kitten.jpg__100x100__crop.jpg", host: "127.0.0.1:80" How do I force Nginx to serve the file relative to the right document root? According to XSendfile documentation the returned path should be relative, so my upstream is doing the right thing.

  Read the article

• grub-efi refuses to chainload Windows 8.1

  - by Alexei Averchenko

  I have installed LMDE (with grub in MBR) after I installed Windows 8.1. I then installed the grub-efi package and added the custom Windows options: #!/bin/sh exec tail -n +3 $0 menuentry "Windows" { search --fs-uuid --no-floppy --set=root A89A-7F4C chainloader (${root})/EFI/Boot/bkpbootx64.efi } menuentry "Windows (backup bootloader)" { search --fs-uuid --no-floppy --set=root A89A-7F4C chainloader (${root})/EFI/Microsoft/Boot/bkpbootmgfw.efi } These are basically a leftover from my older Ubuntu setup. However, grub is refusing to load them, complaining about the invalid signature. What do I do now?

  Read the article

• Dual booting Linux/Win7, Grub refuses to load Win7

  - by JohnB

  Decided to give Linux Mint a try (Ubuntu's interface annoys me), so I installed it with the intention of dual booting with Windows 7. Installation went fine, but now I can only boot into Linux Mint. Grub lists two Windows 7 menu options, but selecting either of them causes an "unknown file system" error and dumps me into a Grub recovery prompt. There, I have to manually reset the root and prefix options, as they reset hd0,msdos6 when they should be hd0,msdos5. I ran Boot Repair twice, once to fix grub errors, once to rebuild the MBR, but it didn't fix anything. Here is the log: http://paste.ubuntu.com/1029675/ fdisk output: Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 1486249145 743021149 7 HPFS/NTFS/exFAT /dev/sda3 1486249982 1953523711 233636865 5 Extended /dev/sda5 1486249984 1945141247 229445632 83 Linux /dev/sda6 1945143296 1953523711 4190208 82 Linux swap / Solaris grub.cfg: ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 86184D18184D091F chainloader +1 } menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 56D84F84D84F60FB chainloader +1 } ### END /etc/grub.d/30_os-prober ### I have found a few similar troubleshooting guides so far, but so far no amount of updating/configuring Grub has been successful. Last resort is, I suppose, use the W7 recovery disc and start over. Thanks in advance! Linux Mint 13 Maya, 64-bit Windows 7 Home Edition, 64-bit

  Read the article

• Installing Ruby on Rails on Ubuntu 10.04: A Living Nightmare

  - by emptyset

  Update #3: Starting over from scratch, shortened this post, decided to re-install a clean copy of Ubuntu 10.04 on a VM and go through the walk-through again. So, all the steps go without a hitch. As root: root@ubuntu:~/rubygems-1.3.7# ruby -v ruby 1.8.7 (2010-01-10 patchlevel 249) [x86_64-linux] root@ubuntu:~/rubygems-1.3.7# gem -v 1.3.7 root@ubuntu:~/rubygems-1.3.7# rails -v Rails 2.3.8 Now, as myself (in a separate term): emptyset@ubuntu:~$ ruby -v ruby 1.8.7 (2010-01-10 patchlevel 249) [x86_64-linux] emptyset@ubuntu:~$ gem -v /usr/local/lib/site_ruby/1.8/rubygems.rb:10:in `require': no such file to load -- rubygems/defaults (LoadError) from /usr/local/lib/site_ruby/1.8/rubygems.rb:10 from /usr/local/bin/gem:8:in `require' from /usr/local/bin/gem:8 emptyset@ubuntu:~$ rails -v bash: /usr/bin/rails: Permission denied So, this appears to be a permissions issue, but I don't understand why. Specifically, if I have to start making things go+rx all over the place, I really need to understand which specific files need the permissions change.

  Read the article

• Import a bunch of certificates into the correct certificate store using a script

  - by Jesse Weigert

  I have a collection of certificates in a p7b file, and I would like to automatically import each certificate into the correct store depending on the certificate template. What is the best way to do this with a script? I tried using certutil -addstore root Certificate.p7b, and that will correctly place all of the root CAs into the root store, but it returns an error if it encounters any other type of certificate. I'm willing to use batch scripts, vbscript or powershell to accomplish this task. Thanks!

  Read the article

• MegaCLI always returns blank output

  - by JamesHannah

  This server is a Dell R200 running Ubuntu 8.04LTS using a LSI SAS1068E raid card supplied from Dell, I suspect that there might be some kind of RAID issue with the hardware raid built into the motherboard, but I can't seem to get MegaCLi to return any useful output: root@81 $ ./MegaCli -AdpAllInfo -aALL root@81 $ ./MegaCli -PDList -aALL root@81 $ The disks work and AFAIK the raid software is installed correctly. I've seen this issue on RedHat issues also in the past. The RAID was initially setup through the BIOS on this server and appears to be functioning fine apart from this.

  Read the article

• Limit which processes a user can restart with supervisor?

  - by dvcolgan

  I have used supervisor to manage a Gunicorn process running a Django site, though this question could pertain to anything being managed by supervisor. Previously I was the only person managing and using our server, and supervisor just ran as root and I would use sudo to run supervisorctl restart myapp when needed. Now our server has to support multiple users working on different sites, and each project needs to be able to restart their own gunicorn processes without being able to restart other users' processes. I followed this blog post: http://drumcoder.co.uk/blog/2010/nov/24/running-supervisorctl-non-root/ and was able to allow non-root users to use supervisorctl, but now anyone can restart anyone else's processes. From the looks of it, supervisor doesn't have a way of doing per-user access control. Anyone have any ideas on how to allow users to restart only their own processes without root?

  Read the article

• What does "link to unknown" mean?

  - by Question Overflow

  I just upgraded my server to Fedora 17 which made a switch of my bootloader from GRUB Legacy to GRUB2. There are two symbolic links in the /etc folder that points to the files grub.conf and grub.cfg in /boot/grub and /boot/grub2 respectively. Though the targets seem correct, the link icons are displaying an X status which seems to indicate that the links are broken. Upon right-clicking the property type, it states "link to unknown". The file size of the link corresponds exactly with the file size of the target file, so, why does the links appear to be broken? The image of the link icons: As requested, the following are the outputs from the commands: $ ls -l /etc/grub.conf lrwxrwxrwx. 1 root root 22 Jul 14 2011 /etc/grub.conf -> ../boot/grub/grub.conf $ ls -l /etc/grub2.cfg lrwxrwxrwx. 1 root root 22 Dec 10 18:57 /etc/grub2.cfg -> ../boot/grub2/grub.cfg

  Read the article

• security issue of Linux sudo command?

  - by George2

  Hello everyone, 1. I am using Red Hat Enterprise 5 Linux box. I find if a user is in /etc/sudoers file, then if the user run command with sudo, the user will run this command with root privilege (without knowing root password, the user runs sudo only need to input the user's own password in order to run a command with sudo). Is that correct understanding? 2. If yes, then is it a security hole? Since users other than root could run with root privilege? thanks in advance, George

  Read the article

• I am unable to find login page for phpmyadmin

  - by Awan

  I was using phpmyadmin(in Wamp) without a password for root. I thought to set a password for root and goto Privileges page and set a password for root. Now whenever I go to localhost/phpmyadmin page it gives me the following error. MySQL said: Documentation #1045 - Access denied for user 'root'@'localhost' (using password: NO) phpMyAdmin tried to connect to the MySQL server, and the server rejected the connection. You should check the host, username and password in your configuration and make sure that they correspond to the information given by the administrator of the MySQL server. I don't know that what is the problem. It is not showing me a login type page to enter a username and password. Any idea that what is the problem ? Thanks

  Read the article

• Graphics driver for ubuntu on dell latitude XT

  - by marc.riera

  we have a laptop (dell latitude xt) on our company, and we would like to install ubuntu on it. windows 7 works fine out of the box, so the hardware is fine. since this laptop has a touchscreen we just installed ubuntu 10.10 netbook edition 32x. But, we do not manage to enable the touchscreen, neither the vga graphic drivers. this is the output from lspci, if somebody cares. 00:00.0 Host bridge: ATI Technologies Inc Radeon Xpress 7930 Host Bridge 00:01.0 PCI bridge: ATI Technologies Inc RS7932 PCI Bridge 00:04.0 PCI bridge: ATI Technologies Inc Device 7934 00:06.0 PCI bridge: ATI Technologies Inc RS7936 PCI Bridge 00:07.0 PCI bridge: ATI Technologies Inc Device 7937 00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0) 00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1) 00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2) 00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3) 00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4) 00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI) 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14) 00:14.1 IDE interface: ATI Technologies Inc SB600 IDE 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon Xpress 1250 03:01.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller 03:01.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller 03:01.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5756ME Gigabit Ethernet PCI Express 0b:00.0 Network controller: Broadcom Corporation BCM4321 802.11a/b/g/n (rev 03) I've tryied to install ati drivers 9.3 , which I downloaded and installed, unpacked and installed, builded and installed, but nothing worked. Looks like the latests version is just accepted to work on jaunty 9.04, so they are kind of old. what else I can do? thanks. Marc Information added: lsusb and lspci -n |grep 01:05.0 sysop@wl083517:~$ lspci -n |grep 01:05.0 01:05.0 0300: 1002:7942 sysop@wl083517:~$ lsusb Bus 006 Device 002: ID 413c:8138 Dell Computer Corp. Wireless 5520 Voda I Mobile Broadband (3G HSDPA) Minicard EAP-SIM Port Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 002: ID 413c:8140 Dell Computer Corp. Wireless 360 Bluetooth Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 1b96:0001 N-Trig Duosense Transparent Electromagnetic Digitizer Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 03f0:1807 Hewlett-Packard Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub sysop@wl083517:~$

  Read the article

• Free space on Dedi' in CentOS

  - by Trance84

  It will sound stupid but i need to figure out how much disk space i have in my dedicated server, it runs CentOS6...the last command i issued was this [root@ks34900 ~]# df -h Filesystem Size Used Avail Use% Mounted on rootfs 9.7G 6.4G 2.9G 69% / /dev/root 9.7G 6.4G 2.9G 69% / none 1000M 288K 1000M 1% /dev /dev/sda2 914G 200M 868G 1% /home But again, stupid as it may sound... i cant figure out how much space i have in "/" folder (root) And is it possible that "/usr" have a different space (partition)?

  Read the article

• Nginx - Enable PHP for all hosts

  - by F21

  I am currently testing out nginx and have set up some virtual hosts by putting configurations for each virtual host in its own file in a folder called sites-enabled. I then ask nginx to load all those config files using: include C:/nginx/sites-enabled/*.conf; This is my current config: http { server_names_hash_bucket_size 64; include mime.types; include C:/nginx/sites-enabled/*.conf; default_type application/octet-stream; sendfile on; keepalive_timeout 65; server { listen 80; root C:/www-root; #charset koi8-r; #access_log logs/host.access.log main; location / { index index.html index.htm index.php; } # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } } server{ server_name localhost; } } And this is one of the configs for a virtual host: server { server_name testsubdomain.testdomain.com root C:/www-root/testsubdomain.testdomain.com; } The problem is that for testsubdomain.testdomain.com, I cannot get php scripts to run unless I have defined a location block with fastcgi parameters for it. What I would like to do is to be able to enable PHP for all hosted sites on this server (without having to add a PHP location block with fastcgi parameters) for maintainability. This is so that if I need to change any fastcgi values for PHP, I can just change it in 1 location. Is this something that's possible for nginx? If so, how can this be done?

  Read the article

• sudo/su command for Red Hat Server 5.4

  - by rednaxela

  Without going into too much detail, I need to execute one linux command on redhat with root user access. Red Hat Server 5.4 does not recognise the sudo command. The command su can be used to switch to the root user on redhat, but su cannot be done in one line. For example the command: su ; cd opt/storage/RootAccessFolder will not work because this only switches you to root, then executes the cd command once you have logged out from the root user. I guess what i'm looking for is like a.. sudo cd opt/storage/RootAccessFolder but I say again, sudo doesn't work. Any ideas?

  Read the article

• How to move a ruby on rails application to a new server

  - by ManiacZX

  I have a rails app on an old Ubuntu server I need to move onto a new machine. I haven't worked with ruby on rails so I don't really know anything about the structure of the app. I want to load this onto an Ubuntu 8.04 AMI on Amazon EC2 and am looking for any information regarding the migration process such as: Do I copy over the entire folder defined as the application root in the mongrel config (for ex: /u/apps/myapp/current) or just certain folders? Am I looking for trouble if I go with the latest versions of ruby and the various gems? Any general gotchas to look out for in the process. Current server information: root@webnode001:/# cat /proc/version Linux version 2.6.15-27-server (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP Fri Dec 8 18:43:54 UTC 2006 root@webnode001:/# rails -v Rails 1.2.3 root@webnode001:/# mongrel_rails cluster::configure --version Version 1.0.1 root@webnode001:/# gem -v 0.9.0 root@webnode001:/# gem list -l *** LOCAL GEMS *** actionmailer (1.3.3, 1.2.5) Service layer for easy email delivery and testing. actionpack (1.13.3, 1.12.5) Web-flow and rendering framework putting the VC in MVC. actionwebservice (1.2.3, 1.1.6) Web service support for Action Pack. activerecord (1.15.3, 1.15.2, 1.14.4) Implements the ActiveRecord pattern for ORM. activesupport (1.4.2, 1.4.1, 1.3.1) Support and utility classes used by the Rails framework. cgi_multipart_eof_fix (2.1) Fix an exploitable bug in CGI multipart parsing which affects Ruby <= 1.8.5 when multipart boundary attribute contains a non-halting regular expression string. daemons (1.0.7, 1.0.5, 1.0.4, 1.0.2) A toolkit to create and control daemons in different ways eventmachine (0.7.2, 0.7.0) Ruby/EventMachine socket engine library fastercsv (1.2.0, 1.1.0) FasterCSV is CSV, but faster, smaller, and cleaner. fastthread (1.0) Optimized replacement for thread.rb primitives ferret (0.11.4) Ruby indexing library. gem_plugin (0.2.2, 0.2.1) A plugin system based only on rubygems that uses dependencies only mongrel (1.0.1, 0.3.13.4) A small fast HTTP library and server that runs Rails, Camping, Nitro and Iowa apps. mongrel_cluster (0.2.1) Mongrel plugin that provides commands and Capistrano tasks for managing multiple Mongrel processes. mysql (2.7) MySQL/Ruby provides the same functions for Ruby programs that the MySQL C API provides for C programs. piston (1.3.3) Piston is a utility that enables merge tracking of remote repositories. rails (1.2.3, 1.1.6) Web-application framework with template engine, control-flow layer, and ORM. rake (0.7.3, 0.7.1) Ruby based make-like utility. sources (0.0.1) This package provides download sources for remote gem installation swiftiply (0.5.1) A fast clustering proxy for web applications.

  Read the article

• NFS headaches with FreeBSD 4.9

  - by Ernie

  Once upon a time, this used to work, and I kept the configuration the same, but... now nothing. I'm just trying to get an NFS server set up on a FreeBSD 4.9 server. The process should be about as complicated as this: Add this entry to /etc/exports: /var/home /var/vpopmail/domains -maproot=root XXX.XX.XX.XXX Execute this: portmap nfsd -u -t -n 4 mountd -r Then this should work, regardless of network and firewall issues: showmount -e localhost But showmount -e localhost fails with the following error: RPC: Port mapper failure showmount: can't do exports rpc And even if I kill off the NFS daemon, and try a rpcinfo -p localhost, I get this error: rpcinfo: can't contact portmapper: rpcinfo: RPC: Unable to receive; errno = Connection reset by peer The portmapper is still running. Why the heck does nothing work as if it isn't? Edit to add: FYI: Sockstat gives me this: $ sockstat |egrep "(nfsd|portmap)" root nfsd 86310 3 udp4 *:2049 *:* root nfsd 86310 4 udp4 *:973 *:* root portmap 45920 0 tcp4 *:111 *:* Then, at a later time (say, 5 minutes) it's as if nfsd isn't acting as a server: $ sockstat |egrep "(nfsd|portmap)" root portmap 45920 0 tcp4 *:111 *:* But the nfs daemon is still running: $ ps ax |grep nfsd 86311 ?? I 0:00.00 nfsd: server (nfsd) 86312 ?? I 0:00.00 nfsd: server (nfsd) 86313 ?? I 0:00.00 nfsd: server (nfsd) 86314 ?? I 0:00.00 nfsd: server (nfsd)

  Read the article

• Trouble setting up PATH for Java on Debian

  - by milkmansrevenge

  I am trying to get Oracle Java 7 update 3 working correctly on Debian 6. I have downloaded and set up the files in /usr/java/jre1.7.0_03. I have also set the following two lines at the end of /etc/bash.bashrc: export JAVA_HOME=/usr/java/jre1.7.0_03 export PATH=$PATH:$JAVA_HOME/bin Logging in as other users and root is fine, Java can be found: chris@mc:~$ java -version java version "1.7.0_03" Java(TM) SE Runtime Environment (build 1.7.0_03-b04) Java HotSpot(TM) 64-Bit Server VM (build 22.1-b02, mixed mode) However there are two cases where Java cannot be found as detailed below. Note that both of these worked fine when I have previously installed OpenJDK Java 6 via aptitude, but I need Oracle Java 7 for various reasons. Most importantly, I cannot run commands as another user via su, despite the PATH showing that Java should be present. The user was created with adduser chris root@mc:~# su chris -c "echo $PATH" /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/java/jre1.7.0_03/bin:/bin root@mc:~# su chris -c "java -version" bash: java: command not found root@mc:~# su chris -c "/usr/java/jre1.7.0_03/bin/java -version" java version "1.7.0_03" ... How can it be in the PATH but not be found? Update 05/04/2012: explained by Daniel, to do with it being a non-interactive shell so files such as /etc/profile and /etc/bash.bashrc are not executed. Doing a full swap to that user and running Java works: root@mc:~# su chris chris@mc:/root$ java -version java version "1.7.0_03" ... I run a script on start up which exhibits similar but slightly different problems. The script is located in /etc/init.d/start-mystuff.sh and calls a jar: #!/bin/bash # /etc/init.d/start-mystuff.sh java -jar /opt/Mars.jar I can confirm that the script runs on start up and the exit code is 127, which indicates command not found. Inserting a line to print/save the PATH shows that it is: /sbin:/usr/sbin:/bin:/usr/bin This second problem isn't as important because I can just point directly to the Java executable in the script, but I am still curious! I have tried setting the full PATH and JAVA_HOME explicitly in /etc/environment which didn't help. I have also tried setting them in /etc/profile which doesn't seem to help either. I have tried logging in and out again after setting PATH in the various locations (duh!). Anyway, long post for what will probably have a simple one line solution :( Any help with this would be greatly appreciated, I have spent far too long trying to fix it by myself. Motivation The first problem may seem obscure but in my system I have users that are not allowed SSH access yet I still want to run processes as them. I have a ton of scripts operating in this way and don't want to have to change them all.

  Read the article

• /etc/inputrc does not seem to be recognized as user on Ubuntu 8.04.2 LTS

  - by Brian Hogg

  On a new installation of Ubuntu 8.04.2 LTS, logging in as a standard user does not maintain the keybindings (whether through sudo su - or direct from ssh). As the root user everything is fine and /root/.inputrc does not exist (only /etc/inputrc) which has its default settings. In addition setting a ~/.bashrc and ~/.profile to the same as the root user (and chown'ing to user:user) has no effect. Am I missing something here?

  Read the article

• Tracking down rogue disk usage

  - by Amadan

  I found several other questions regarding the theory behind my problem (e.g. this, this), but I don't know how to apply the answers to my machine. # du -hsx / 11000283 / # df -kT / Filesystem Type 1K-blocks Used Available Use% Mounted on /dev/mapper/csisv13-root ext4 516032952 361387456 128432532 74% / There is a big difference between 11G (du) and 345G (df). Where are the remaining 334G? It's not in deleted files. There was only one, it was short, and I truncated it just in case. This is what remains: # lsof -a +L1 / COMMAND PID USER FD TYPE DEVICE SIZE/OFF NLINK NODE NAME zabbix_ag 4902 zabbix 1w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4902 zabbix 2w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4906 zabbix 1w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4906 zabbix 2w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4907 zabbix 1w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4907 zabbix 2w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4908 zabbix 1w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4908 zabbix 2w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4909 zabbix 1w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4909 zabbix 2w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4910 zabbix 1w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4910 zabbix 2w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) I rebooted to see if fsck does anything. But, from /var/log/boot.log, it seems there are no issues: /dev/mapper/server-root: clean, 3936097/32768000 files, 125368568/131064832 blocks Thinking maybe someone overzealously reserved root space, I checked the master record: # tune2fs -l /dev/mapper/server-root tune2fs 1.42 (29-Nov-2011) Filesystem volume name: <none> Last mounted on: / Filesystem UUID: 86430ade-cea7-46ce-979c-41769a41ecbe Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal ext_attr resize_inode dir_index filetype needs_recovery extent flex_bg sparse_super large_file huge_file uninit_bg dir_nlink extra_isize Filesystem flags: signed_directory_hash Default mount options: user_xattr acl Filesystem state: clean Errors behavior: Continue Filesystem OS type: Linux Inode count: 32768000 Block count: 131064832 Reserved block count: 6553241 Free blocks: 5696264 Free inodes: 28831903 First block: 0 Block size: 4096 Fragment size: 4096 Reserved GDT blocks: 992 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 8192 Inode blocks per group: 512 Flex block group size: 16 Filesystem created: Fri Feb 1 13:44:04 2013 Last mount time: Tue Aug 19 16:56:13 2014 Last write time: Fri Feb 1 13:51:28 2013 Mount count: 9 Maximum mount count: -1 Last checked: Fri Feb 1 13:44:04 2013 Check interval: 0 (<none>) Lifetime writes: 1215 GB Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 256 Required extra isize: 28 Desired extra isize: 28 Journal inode: 8 First orphan inode: 28836028 Default directory hash: half_md4 Directory Hash Seed: bca55ff5-f530-48d1-8347-25c004f66d43 Journal backup: inode blocks The system is: # uname -a Linux server 3.2.0-67-generic #101-Ubuntu SMP Tue Jul 15 17:46:11 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux # cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.2 LTS" Does anyone have any tips on what exactly to do to find and hopefully reclaim the missing space?

  Read the article

• Set up Glassfish connection pool to talk to a database on a Ubuntu VPS

  - by Harry Pham

  On my Ubuntu VPS, i have a mysql server running and a Glassfish 3.0.1 Application Server running. And I am having a hard to have my GF successfully ping the database. Here is my GF set up Assume: x.y.z.t is the ip of my VPS Resource Type: javax.sql.ConnectionPoolDataSource User: root DatabaseName: scholar Url: jdbc:mysql://x.y.z.t:3306/scholar URL: jdbc:mysql://x.y.z.t:3306/scholar Password: xxxx PortNumber: 3306 ServerName: x.y.z.t Inside my glassfish3/glassfish/lib, I have my mysql-connector-java-5.1.13-bin.jar Inside the database, table mysql here is the result of the query select User, Host from user; +------------------+-----------+ | User | Host | +------------------+-----------+ | root | 127.0.0.1 | | debian-sys-maint | localhost | | root | localhost | | root | yunaeyes | +------------------+-----------+ Now from my machine, if I try to connect to this db via mysql browser (mysql client software), well I cant. Well from the table above, seem like it only allow localhost to connect to this db. Keep in mind that both my db and my GF are on the same VPS. Please help

  Read the article

• PowerDNS CNAME with multiple A records produces unexpected results

  - by bwight

  This problem from what i can tell is isolated to PowerDNS. The servers are running two packages pdns-static-3.0.1-1.i386.rpm and pdns-recursor-3.3-1.i386.rpm on the most recent version of Amazon Linux. The amazon ec2 loadbalancers are assigned a CNAME with multiple hosts. Below is an example of the actual behavior. Notice how the hosts are always in the same order. [root@localhost ~]# host cache.domain.com cache.domain.com is an alias for xxxxx.us-east-1.elb.amazonaws.com. xxxxx.us-east-1.elb.amazonaws.com has address aaa.aaa.aaa.aaa xxxxx.us-east-1.elb.amazonaws.com has address bbb.bbb.bbb.bbb [root@localhost ~]# host cache.domain.com cache.domain.com is an alias for xxxxx.us-east-1.elb.amazonaws.com. xxxxx.us-east-1.elb.amazonaws.com has address aaa.aaa.aaa.aaa xxxxx.us-east-1.elb.amazonaws.com has address bbb.bbb.bbb.bbb [root@localhost ~]# host cache.domain.com cache.domain.com is an alias for xxxxx.us-east-1.elb.amazonaws.com. xxxxx.us-east-1.elb.amazonaws.com has address aaa.aaa.aaa.aaa xxxxx.us-east-1.elb.amazonaws.com has address bbb.bbb.bbb.bbb Expected behavior is round robin for the hosts [root@localhost ~]# host cache.domain.com cache.domain.com is an alias for xxxxx.us-east-1.elb.amazonaws.com. xxxxx.us-east-1.elb.amazonaws.com has address aaa.aaa.aaa.aaa xxxxx.us-east-1.elb.amazonaws.com has address bbb.bbb.bbb.bbb [root@localhost ~]# host cache.domain.com cache.domain.com is an alias for xxxxx.us-east-1.elb.amazonaws.com. xxxxx.us-east-1.elb.amazonaws.com has address bbb.bbb.bbb.bbb xxxxx.us-east-1.elb.amazonaws.com has address aaa.aaa.aaa.aaa [root@localhost ~]# host cache.domain.com cache.domain.com is an alias for xxxxx.us-east-1.elb.amazonaws.com. xxxxx.us-east-1.elb.amazonaws.com has address aaa.aaa.aaa.aaa xxxxx.us-east-1.elb.amazonaws.com has address bbb.bbb.bbb.bbb The addresses eventually do swap but it seems to be on a 30 minute cache timer changing the TTL of the record doesn't appear to affect anything. It appears as though the resolver has a cache of the response. This adversely affects my application because all of the load is only being sent to one of the loadbalancers (Availability Zones) so if I have servers in two zones then only one zone is under load at a time. Do you know how I can fix this so that each time the host is resolved the order of the addresses is alternating.

  Read the article

< Previous Page | 145 146 147 148 149 150 151 152 153 154 155 156  | Next Page >