Search Results

Search found 1024 results on 41 pages for 'boots'.

Page 15/41 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >

• Installing linux on OCZ RevoDrive3 x2

  - by user2101712

  First of all, here is the configuration of my computer: Motherboard: Asus H87Plus RAM: Corsair Vengeance 32GB Processor: Intel i7 4770 Drive: OCZ RevoDrive 3 x2 (240 GB) (OCZ Revodrive3 is a PCIe module) I am trying to install the latest version of Ubuntu Desktop (13.10). The problem is that in the UEFI (bios) the drive shows up as a 240 GB drive, but in the Ubuntu installer it shows up as two 120 GB drives. If I install Ubuntu in any of these two drives, it never boots. The screen flickers a few times and comes back to the UEFI menu. I have tried reading up and have come across information that the drive has a "fakeraid", and the solution is to use dmraid. However, when I give the following commands in the terminal (from live CD): # modprobe dm_mod # dmraid -ay it says: no raid disks. And the following command: # ls -la /dev/mapper/ just shows /dev/mapper/control How can I install Ubuntu on my computer? what is the correct method?

  Read the article

• Ubuntu Variant / Linux Distros which uses least system resources (RAM, CPU)?

  - by elegantonyx

  I have a netbook (an older Asus EEEPC 1005HA) which I want to get rid of Windoze on (I like Windows, but I don't think it works well in a netbook environment). Basically, my question is which Ubuntu variant will use the least RAM and CPU running idle, and/or the same question except when running Firefox and Libreoffice Writer, say. I am also open to suggestions of non-Ubuntu Linux distros, but since this is AskUbuntu I thought the first question would be more appropriate. I have a disk drive which I can attach to the netbook, so it doesn't have to be a Ubuntu Variant / Linux Distro which solely boots from a USB drive. I have at my disposal: DVDs, DVD writer/ disk drive, 4gb flash drive, 8 gb flash drive I was thinking either Lubuntu or Archbang / Crunchbang but I would like some help from more knowledgable people Specs: Can't boot into it right now, but I think I have either Intel Atom N270 @1.60ghz OR Intel Atom N280 @1.66ghz (single core, I think) 2gb RAM 160 GB hard drive

  Read the article

• AMD 6870 Twin Frozr II video adapter issues

  - by user35427

  Hardware: AMD 6870 Twin Frozr II (1GB), ASUS 990 chipset Software: Ubuntu 11.10 Built a new PC from scratch, loaded it with Ubuntu 11.10. It's displaying, but with poor resolution, unable to change, as it says no drivers are installed. Ubuntu indicates that there are 2 proprietary drivers available to download: ATI/AMD proprietary FGLRX Graphics driver (Post-release update) ATI/AMD proprietary FGLRX Graphics driver The first won't even finish downloading. The second downloads and installs, but when I restart the PC as requested it boots up, I see purple in the background, then the video feed just stops with a black screen. I can still hear ubuntu boot up though. It seems like I just need the latest drivers, googled around and not had much luck. I'm pretty new with Ubuntu, but have basic knowledge. Any potentially helpful information would be welcome.

  Read the article

• How to grub-install ignore specific drive/partition

  - by gsedej

  Is it possible to use grub-install or update-grub to just search on specific disk/partition? (or ignore specific)? I installed Ubuntu 12.04 on my hard drive, but i wished to do some testing on it without harming current installation, so I "rsynced" root partition (the only) to the USB partition (ext4). I did fix /etc/fstab on USB partition. The problem is that when I do grub-install /dev/sdb (usb) GRUB seems to confuse when UUIDs. Whatever I chose in GRUB it always boot from disk. In grub in edit mode I see that in two "UUID" lines are not the same. If I retype UUID from "first" to second "line" it boots from USB (as I wish). Is there any other way than fixing /boot/grub/grub.cfg each time? EDIT: the GRUB generated good when I booted from USB and grub-install from there, but question is still if it's possible ignore drives

  Read the article

• A real noob question

  - by Jaymz

  I have a Hp mini netbook that has been wiped clean, there is nothing other than the bios on it, it has no DVD and I don't have an external DVD. I can change the boot order to boot from a usb device. I have downloaded ubuntu-12.04.1-desktop-i386 I have one of these http://www.kikatek.com/P100600/34609-IOMEGA-250gb-Select-Portable-HDD-2-5-USB?source=froogle currently formatted to NTFS but I can format to exFAT I have tried Linuxlive USB creator, all that managed to do was dual boot the desktop pc that I'm working off, and when booting on the wiped clean netbook, just left me with a black screen with a blinking cursor I have also tried Unetbootin, this managed to change my 'My Computer' icon to Install Ubuntu (C:) and now again, my desktop pc dual boots with the Wubi software, the Unetbootin, wouldn't let me select my external drive to write to Please I'm a complete idiot, i need a super idiots guide to doing this Regards Jaymz

  Read the article

• Newly compiled (patched with -ck) 3.3 kernel won't boot up

  - by Shiki

  Screen is garbled. Reaaaally garbled. Like some sort of scrambling image from a movie. I can upload some pictures if needed. To be short with the description. Here is my 3.3 + ck .config file: http://pastebin.com/aP2F9RcH The dmesg log of the failed kernel: http://pastebin.com/esc2Rtka The computer is a ThinkPad T500 laptop. I have selected everything needed for the computer (as far as I can tell, but check the .config). The normal generic Ubuntu kernel boots and works perfect!

  Read the article

• SSD becomes hot, disk failure warning

  - by Aegluin

  I have a two weeks old SSD (Kingston SSDnow 64GB). Yesterday, the computer shutdown twice and after rebooting I was bombarded with disk failure warnings. I usually take such warnings serious (and backed up), but skeptical. After cooling down, the laptop boots again and the only red Smart value was the temperature (Ubuntu did not show the temperature of failure, but the at that time 29°). After refreshing the Smart status and doing a "self test", everything is green. Before contacting Kingston support, I would like to know whether it could be due to a software issue: Is it possible that it is false alarm, and how can I check? I installed Ubuntu 12.04 32bit and took care of alignment. I supposed Ubuntu set up with optimal settings for SSDs, how can I check that there was no mistake? The current temperature is around 40-56°. Is such a temperature abnormal for SSDs? Output of sudo smartctl --all /dev/sda: http://pastebin.ubuntu.com/1175940/

  Read the article

• Help installing?

  - by Meghan Dempsey

  I'm having a really big problem with installing Ubuntu on my computer. It seems that when I try to install from BIOS from the CD, nothing happens, and when I say nothing happens it boots up my computer like usual. When I try to install from the CD from My Computer directly from the wubi.exe file, nothing happens. THEN when I try to install from the boot helper, it gives me this error: An error occurred: Could not retrieve the required installation files For more information please see the log file: c:\users\Meghan\appdata\local\temp\wubi-14.04-rev286.log Will it help if I say I have a pirated version of Windows? Maybe that's why? I'm frustrated, and I'm not sure what to do. Please help me

  Read the article

• Ubuntu not booting from USB on laptop (no optical drive)

  - by Jamie

  I'm using a Kingston 16GB USB, with the Unetbootin program. (I've tried both downloading the installation iso manually and adding it, or using the program to download.) I've tried creating the bootable USB on an iMac, the laptop and also a desktop. I've booted into the setup of the laptop and changed the boot order to make sure it boots from that drive first. (There is no optical drive so that isn't a problem.) It's an Acer Aspire AS3810TZ. Upon booting it gives this message: SYSLINUX 4.03 2010-10-22 EDD Copyright (C) 1994-2010 H. Peter Anvin et al I get this no matter how I create the USB, it just sits there. I left the laptop for an hour and it hadn't moved. I've also tried on a different 4GB USB (Generic) and that did the same.

  Read the article

• Boot Ubuntu on smartphone SD card?

  - by berad

  Now here's what I want: Ubuntu on the SD card that lives in my phone. I like using Ubuntu portably and my phone as a flash drive, but I haven't been able to make these work together yet. I've tried booting off my Huawei U8800 (Android 2.2) and Nokia E66 with a micro-SD card (with 11.10, boots OK in a card-reader) on an eeepc 901 without luck. The Huawei doesn't show up in the BIOS boot menu. BIOS sees the Nokia but halts at "Boot error". I guess this is related to the phone's flash drive emulation and how it handles bootsectors, but I don't know enough about how that works to go any further. Has anyone succeeded in this?

  Read the article

• Cannot boot from Ubuntu USB

  - by Safi

  I create a ubuntu 10.10 bootable USB via the method that is described on the download page of ubuntu. I made that from windows and also from ubuntu 10.04 (I have dual boot). When I boot from the USB made, the menu shows and when I run it, it gives a beep and nothing else. It never boots. USB creation from both methods result the same. I downloaded ubuntu via the torrent provided from Ubuntu. Any help will be very appreciated. I want to make my USB just like a Live CD so that I can run it on some other computers also.

  Read the article

• Character equipment combinations

  - by JimFing

  I'm developing a 2d isometric game (typical Tolkien RPG) and wondering how to handle character/equipment combinations. So for example, the player wears leather boots with chain-mail and a wooden shield and a sword - but then picks up plate-armour instead of chain-mail. I'm using Blender3D to create objects, environments and characters in 3D, then a script runs to render all 3D meshes into 2D orthographic tile maps. So I can use this script to create all the combinations of character equipment for me, but there would be an explosion in terms of the combinations required.

  Read the article

• Install problem on UEFI, Windows 8 new desktop

  - by albuquerque mat

  I just bought an HP desktop, p6-2326s, which has windows 8 installed. I have tried booting a Ubuntu live disc but the machine won't boot it. When I bring up the UEFI boot menu it offers a selection of UEFI BOOT SOURCES, windows boot manager, dvd drive, IP4 Ethernet controller, or IP6 Ethernet controller. If I select the dvd drive with the CD in it I get the message "Secure boot violation, Invalid structure detected. Check secure boot policy in setup." With all other selections it just boots into windows. So where do I go from here?

  Read the article

• Disable automatic starting of sshd?

  - by b.long

  Simple question here; what's the correct way to stop the sshd service from starting when the OS boots ? I'm not sure if this answer is correct, so I'm hoping some guru(s) can help me out! What I'd like is a configuration that (after boot) allows me to start the service using sudo service ssh start when necessary. Version info: me@home:~$ ssh -V OpenSSH_5.9p1 Debian-5ubuntu1, OpenSSL 1.0.1 14 Mar 2012 me@home:~$ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise

  Read the article

• What is default username & password for a persistent pendrive?

  - by sdos

  I am trying out Ubuntu 11.04 on a netbook. I created a live USB to boot from using this: http://www.pendrivelinux.com/universal-usb-installer-easy-as-1-2-3/ and the system boots up into Ubuntu from the USB stick, great! bad news is I am presented with a login form.... I did not set a password so I have no idea what it could be.... username: other password: I have tried no password, no luck... I tried ubuntu, no luck Any Ideas why it has a password, and what it might be or how I can set the password?

  Read the article

• High temperature on my laptop with Radeon Mobility HD4670

  - by Lorthirk

  As almost everyone here, I guess, in these days I downloaded Quantal Quetzal to give it a try. However I noticed that my laptop runs fairly hot with cooling fans almost always on, even sitting in the desktop doing nothing. I downloaded XSensor to read temperature sensors, and I saw that while CPU stays on about 65°C, so quiet normal I guess, the GPU sits at 75°C. In comparison my actual Windows 7 installation, which dual boots witb Quantal, stays at 59°C CPU and 65°C. So I went reading and learned that AMD dropped support for my video card from fglrx package, and that fglrx-legacy won't support 1.13 Xorg, so I'm basically stuck with OSS drivers. So I was guessing if there's anything I can try, and if it's possible that the OSS drivers could be the cause of the high temperature?

  Read the article

• Problem: Black screen after resume

  - by Robert

  Problem: Black screen after resume I found the below statement that I provided the link for but, no instructions with it for a person that's new to Ubuntu on what exactly to do to fix the problem. Can someone clarify this for me? Thank you. Ubunu 13.10 AMD A6-3420M APU with Radeon(tm) HD Graphics × 4 64bit Toshiba L775 My computer boots to a black screen, what options do I have to fix it? Typical scenario is "use a laptop docked with lid closed, only the external screen is active, suspend, take the laptop, open it somewhere"... which leads to "no screen active". To debug this problem, check if gnome-settings-daemons is getting a signal that the display configuration has changed, by running xtrace against it, and look for a RRScreenChangeNotify event when resuming the machine. If that signal is being sent, then it indicates a possible bug in g-s-d. Otherwise, it suggests a bug in either X or (more likely) the kernel which is not causing the signal to be emitted to begin with.

  Read the article

• Can I automatically make my Nvidia card's fan quieter?

  - by Salim Fadhley

  I have a machine with an Nvidia graphics card. Unfortunately the GPU fan is very loud. It's very annoying at times. We never use this machine for intense 3d work - that GPU is probably not working very hard at all. I'm pretty sure I can run it at a much lower fan-speed without causing any problems. The nvclock utility can be used to manually adjust the fan-speed of my Nvidia graphics card. I'd like to call this utility automatically when the machine boots up. Is there some kind of system service which I can use to automatically apply this kind of system-wide configuration? Even better, is there a system monitoring service which can poll the GPU temperature and adjust the various system fan-speeds accordingly? Thanks!

  Read the article

• Black screen white cursor and can't boot from live disc that I installed from just yesterday (Ubuntu 12.04)

  - by Luke

  So, I've decided to change to Ubuntu from Windows 7 after reformatting. Install goes smoothly, I've set everything up, and it works for a day. It crashed when I had a full screen video, froze, so I rebooted, and now I can't get past the black screen with flashing white underscore cursor. If I wait a while, I get "Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press any key" I've tried that, removed any boot options but the DVD drive, even tried my Windows 7 boot CD as well. Nothing boots, so I can't do anything. This is on an Asus A52N laptop, and all I can access now is the BIOS (version K52N 217), as far as I can tell.

  Read the article

• Ubuntu 12.10 WiFi Problems

  - by Sean Webber

  I have a 32 bit machine running Ubuntu 12.10 with WiFi on it. I have a WPA2 network at home, but if I leave the USB Adapter plugged in while it boots, it infinitely keeps asking for the network password but never connects. If I plug it in after boot, it will connect but then I can't access ANYTHING on the LAN or Internet because "the DNS servers are unreachable". Now, if I leave the computer on a while, I get lucky sometimes and it MAGICALLY decides to connect for a little bit, lock the machine though and the Internet's gone again. The weirdest thing, is when I am connected but can't get to the internet, I do a netstat or ifconfig wlan0, I do have an IP address and everything. It says I'm connected but its not. I have a Realtek RTL8188CU USB adapter.

  Read the article

• Failing to install Ubuntu 13.04

  - by Kayven Riese

  I have a new Windows 8 Sony Vaio SVF14A15CXB laptop that has UEFI and I have been struggling through an Ubuntu installation. I have a bootable Ubuntu DVD+R and I have managed to mess with my BIOS/UEFI so that it boots. I have used Windows 8 to create a desired hard disk partition and installed Ubuntu there, and have burned a boot-repair http://sourceforge.net/p/boot-repair-cd/home/Home/ and rEFInd http://www.rodsbooks.com/refind/getting.html disk and neither will boot. I know I should continue googling and struggling, but I am getting frustrated. Thanks to anyone who gives me the time of day.

  Read the article

• Unable to boot to Ubuntu

  - by nsk

  Just got a new laptop and removed Windows 8 and installed 13.10 using LiveUSB. Initially it was booting to "No boot media" but I was able to resolve it with boot-repair. I realized some of the items I need isn't supported on 13.10, so attempted to install 13.04 instead. Now without LiveUSB, the laptop just boots to "No boot media" but boot repair doesn't seem to be fixing it. Tried going back to 13.10, but no dice. After boot repair it says "Please do not forget to make your BIOS boot on sda1/EFI/ubuntu/grubx64.efi file!". GParted shows sda1 has the boot flag. Using Toshiba Satellite P50. Secure Boot disabled. UEFI enabled. Any help would be highly appreciated. http://paste.ubuntu.com/6366556/

  Read the article

• Failed GRUB after 10.04 to 12.04 upgrade in system with LVM

  - by Vagelis L

  I am using Ubuntu Server as a SMB server at work and two days ago I have tried to upgrade it to 12.04. After reboot, I got this grub_xput missing grub rescue> and all attempts to start from this prompt failed (missing components, although grub directory is normally set as prefix). My system sits and boots on an LVM (soft raid-5). I have read almost all posts in many forums, tried grub rescue, boot-repair, ubuntu-secure-remix with boot-repair but without positive result. This is the log of my last (and best so far) attempt to fix this system. Any suggestions? Please help.

  Read the article

• Gnome/X logs off immediately after login -- which logfiles are relevant?

  - by joebuntu

  I've been tinkering with fingerprint-gui as well as X/xrandr resolution settings. When I start my machine, it boots up normally. As soon as X and gnome have finished starting, it logs me off automatically and brings me back to the gdm login prompt with the user list. Then I am, however, able to log in using "Ubuntu Desktop Fail-safe". I've checked the list of start-up applications, but everything seems fine there. I can't yet put my finger on what exactly might be responsible for this: X, gnome or some messed up pam.d settings. So far I've checked /var/logs/X11/xorg.0.log, /var/logs/auth.log and ~/.xsession-errors. In addition, I don't quite seem to understand the "interplay" between X, GDM, GNOME, GNOME-policykit, PAM.d and all that. Are there any other relevant log files that could point me to what's broken? Specs: Ubuntu 10.10 Maverick Meerkat IBM/Lenovo Thinkpad R60, ATI Radeon x1400 Mobility all updates installed Linux User 1 year+,

  Read the article

• why does my lubuntu recognizes only lubuntu instalation cds?

  - by Hardi

  I installed lubuntu from alternate cd a month ago. Now when I needed to read some cd's, the cd try won't open. It can be opened before ubuntu boots up. It can be opened after entering sudo eject -i off from console. But it won't mount any other cd-roms, than just the lubuntu live-cd and lubuntu alternate instal cd, where it was installed from. "mount: no medium found on /dev/sr0" as output, when try to mount anything else. Problem can't be in corrupted sd's, because othe computer, did recognize them well.

  Read the article

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >