Search Results

Search found 520 results on 21 pages for 'sean webber'.

Page 1/21 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Up in the Air: Team Oracle Play-by-Play

    - by Aaron Lazenby
    Yesterday, I had the amazing opportunity to fly along with Sean D. Tucker and Team Oracle. Leaving from the San Carols airport, we did a 30 minute flight over the Pacific just south of the coastal town of Half Moon Bay. In that half hour, I rode through a massive 4G loop, survived a crushing hammerhead, and took control of the plane to perform a basic wing over (you can learn what the heck I'm talking about by visiting this website). I have lots of great video, but it's going to take me some time to make sense of it. For now, here's my Twitter-based play-by-play of yesterday's events. Many thanks to Sean D. Tucker and the whole crew (Ben and Ian, especially) for this great opportunity to fly with Team Oracle.Live tweets from @OracleProfitI will be spending the afternoon in a stunt plane, upside down above the San Francisco bay. http://bit.ly/cwkrkIAt the San Carlos airport. More than slightly freaked out. Shaking hands diminish texting ability. Slightly reassuring. http://yfrog.com/1qt61nj There go the doors to the photo plane... #teamoracle http://yfrog.com/58ywljSean D Tucker assures me: "The sky is a great place to be." Helpful, but I'm still nervous. #teamoracle"You get a parachute. He gets a harness." How was this decision made? #teamoracleThe plane with @radu43 has returned. I'm up next...Couldn't help myself...drank a soda before flying. Mistake? We'll see... #teamoracleAdvice of the day "If you pull with two hands, you improve the chances of the chute deploying on the first try." Lovely. #teamoracleI feel so strange. But I flew a high performance airplane. And did an aerobatics move. Wild. #teamoracle"Flying ten feet off he ground, upside-down at 250 miles per hour isn't exciting to me." Sean D. Tucker #teamoracle"What is exciting to me is flying that perfect pattern, just like I imagined it in my head." Sean D. Tucker #teamoracle"You're going to sleep well tonight. You just carried four times your body weight." #teamoracle #gforce Just watched the #teamoracle plane take off for its flight home. I'm waiting for Caltrain. #undignifiedanticlimaxEnough with the #teamoracle. Check http://blogs.oracle.com/profit for the video. Coming soon! 

    Read the article

  • Tomorrow: Profit Rides into the DANGER ZONE!!!

    - by Aaron Lazenby
    On May 4 I'll be suiting up with Oracle social media maven Marius Ciortea-- Iceman and Maverick-style--for a flight in the Team Oracle stunt plane. World-renowned pilot Sean Tucker and his team were nice enough to invite us along to participate in aerial photo shoots over Oracle headquarters and the San Francisco bay. I don't think we'll be able to recreate the epic tension generated between Tom Cruise and Val Kilmer in "Top Gun" but we'll do our best to get some good photos, videos, and interviews along the way. Check back on Wednesday for a full report.

    Read the article

  • Xorg does not see my monitor EDID

    - by sean farley
    Below is the output from my Xorg.0. X.Org X Server 1.11.3 Release Date: 2011-12-16 [ 22.311] X Protocol Version 11, Revision 0 [ 22.311] Build Operating System: Linux 2.6.42-23-generic x86_64 Ubuntu [ 22.311] Current Operating System: Linux sean-P55-USB3 3.2.0-34-generic #53-Ubuntu SMP Thu Nov 15 10:48:16 UTC 2012 x86_64 [ 22.311] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-34-generic root=UUID=0a34603e-aee9-44d1-8982-a5a5a38c3e4d ro quiet splash [ 22.311] Build Date: 29 August 2012 12:12:33AM [ 22.311] xorg-server 2:1.11.4-0ubuntu10.8 (For technical support please see http://www.ubuntu.com/support) [ 22.311] Current version of pixman: 0.24.4 [ 22.311] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 22.311] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 22.311] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 17 13:20:45 2012 [ 22.311] (==) Using config file: "/etc/X11/xorg.conf" [ 22.311] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 22.311] (==) No Layout section. Using the first Screen section. [ 22.311] (==) No screen section available. Using defaults. [ 22.311] (**) |-->Screen "Default Screen Section" (0) [ 22.311] (**) | |-->Monitor "<default monitor>" [ 22.311] (==) No device specified for screen "Default Screen Section". Using the first device section listed. [ 22.311] (**) | |-->Device "Default Device" [ 22.311] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 22.311] (==) Automatically adding devices I have searched all over, and followed lots of dead ends and unanswered questions on this issue. I need to get this monitor recognised so I can use the native resolution of 1600x1200. The Nvidia driver in Windows has no problem with this. The monitor is an old Iiyama HM204DT A. Is there a way of configuring Xorg manually to get these working? I have tried xrandr but this will not work. Output:- sean@sean-P55-USB3:~$ xrandr Screen 0: minimum 8 x 8, current 1152 x 864, maximum 16384 x 16384 DVI-I-0 connected 1152x864+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0 + 1360x768 60.0 59.8 1152x864 60.0* 800x600 72.2 60.3 56.2 680x384 119.9 119.6 640x480 59.9 512x384 120.0 400x300 144.4 320x240 120.1 DVI-I-1 disconnected (normal left inverted right x axis y axis) DVI-I-2 disconnected (normal left inverted right x axis y axis) HDMI-0 disconnected (normal left inverted right x axis y axis) DVI-I-3 disconnected (normal left inverted right x axis y axis) Tried Nvidia Xorg.config: sean@sean-P55-USB3:~$ sudo nvidia-xconfig [sudo] password for sean: Using X configuration file: "/etc/X11/xorg.conf". VALIDATION ERROR: Data incomplete in file /etc/X11/xorg.conf. Device section "Default Device" must have a Driver line. Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.nvidia-xconfig-original' Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.backup' New X configuration file written to '/etc/X11/xorg.conf' How do I insert a driver line? This is a bit of a pain as I want to use my Vectorworks cad program in a WinXP Vbox at 1600x1200 but all virtual drives are restricted to the host screen resolution. Do i need to manually create EIDI info in Xorg? I am slightly confused about how Xorg and Nvidia relate Please help

    Read the article

  • "type" Command Not Working As Expected on Git Bash

    - by trysis
    The type command, in Linux, returns the location, on the filesystem, of the given file, if it is in the current folder or the $PATH. This functionality is also available through Windows with the Git Bash command line program. The command also returns a file's location given the file without its extension (.exe, .vbs, etc.) However, I have run into what seems like a strange corner case where the file exists on the $PATH but doesn't get returned using the command. I am thinking of buying a new computer soon, so I looked up the method of transferring the license key from one computer to another, in preparation for actually doing this. The method I found mentioned the files slmgr.vbs and slui.exe, both of which reside in the C:/Windows\System32 folder, which is in my $PATH, as usual for a Windows computer. However, these two files aren't showing up when I use the type command. Also, neither gets executed when I call the files as commands without their extensions in Git Bash, and only slmgr.vbs gets executed when I call them with the extensions. Finally, slmgr.vbs is shown when listing the folder's contents in Git Bash, as well, but slui.exe isn't. I thought this might have to do with permissions, and, indeed, both files have very restrictive permissions, as you can see in the pictures below, but they both have the same permissions, which wouldn't explain why one gets executed and the other doesn't when called directly, nor why one file is listed on command line but the other isn't. C:\Windows\System32 folder, proving the files exist: File permissions for the Users and Administrators groups for the two files (they are identical): And the folder: type command and its output in Git Bash for the 2 files, plus listing the files in the folder (using grep to filter as the folder is huge), as well as listing part of the $PATH (keep in mind, for all these, that Git Bash changes the paths as they are displayed): Sean@MYPC ~ $ type -a slmgr sh.exe": type: slmgr: not found Sean@MYPC ~ $ type -a slmgr.vbs sh.exe": type: slmgr.vbs: not found Sean@MYPC ~ $ type -a slui sh.exe": type: slui: not found Sean@MYPC ~ $ type -a slui.exe sh.exe": type: slui.exe: not found Sean@MYPC ~ $ slmgr sh.exe": slmgr: command not found Sean@MYPC ~ $ slmgr.vbs /c/WINDOWS/system32/slmgr.vbs: line 2: syntax error near unexpected token `(' /c/WINDOWS/system32/slmgr.vbs: line 2: `' Copyright (c) Microsoft Corporation. A ll rights reserved.' Sean@MYPC ~ $ slui sh.exe": slui: command not found Sean@MYPC ~ $ slui.exe sh.exe": slui.exe: command not found Sean@MYPC ~ $ ls /c/Windows/System32/slui.exe /c/Windows/System32/slmgr.vbs ls: /c/Windows/System32/slui.exe: No such file or directory /c/Windows/System32/slmgr.vbs Sean@MYPC ~ $ echo $PATH /c/Users/Sean/bin:.:/usr/local/bin:/mingw/bin:/bin:/cmd:/c/Python33/:/c/Program Files (x86)/Intel/iCLS Client/:/c/Program Files/Intel/iCLS Client/:/c/WINDOWS/sy stem32:/c/WINDOWS:/c/WINDOWS/System32/Wbem:/c/WINDOWS/System32/WindowsPowerShell /v1.0/:/c/Program Files/Intel/Intel(R) Management Engine Components/DAL:/c/Progr am Files/Intel/Intel(R) Management Engine Components/IPT:/c/Program Files (x86)/ Intel/Intel(R) Management Engine Components/DAL:/c/Program Files (x86)/Intel/Int el(R) Management Engine Components/IPT:/c/Program Files/Intel/WiFi/bin/:/c/Progr am Files/Common Files/Intel/WirelessCommon/:/c/strawberry/c/bin:/c/strawberry/pe rl/site/bin:/c/strawberry/perl/bin:/c/Program Files (x86)/Microsoft ASP.NET/ASP. NET Web Pages/v1.0/:/c/Program Files/Microsoft SQL Server/110/Tools/Binn/:/c/Pro gram Files (x86)/Microsoft SQL Server/90/Tools/binn/:/c/Program Files (x86)/Open AFS/Common:/c/HashiCorp/Vagrant/bin:/c/Program Files (x86)/Windows Kits/8.1/Wind ows Performance Toolkit/:/c/Program Files/nodejs/:/c/Program Files (x86)/Git/cmd :/c/Program Files (x86)/Git/bin:/c/Program Files/Microsoft/Web Platform Installe r/:/c/Ruby200-x64/bin:/c/Users/Sean/AppData/Local/Box/Box Edit/:/c/Program Files (x86)/SSH Communications Security/SSH Secure Shell:/c/Users/Sean/Documents/Lisp :/c/Program Files/GCL-2.6.1/lib/gcl-2.6.1/unixport:/c/Chocolatey/bin:/c/Users/Se an/AppData/Roaming/npm:/c/wamp/bin/mysql/mysql5.6.12/bin:/c/Program Files/Oracle /VirtualBox:/c/Program Files/Java/jdk1.7.0_51/bin:/c/Program Files/Node-Growl:/c /chocolatey/bin:/c/Program Files/eclipse:/c/MongoDB/bin:/c/Program Files/7-Zip:/ c/Program Files (x86)/Google/Chrome/Application:/c/Program Files (x86)/LibreOffi ce 4/program:/c/Program Files (x86)/OpenOffice 4/program What's happening? Why aren't these files listed with the type command? Is this issue because of weird Windows permissions, or something even weirder? If permissions, why do they seem to have the same permissions, yet both are not handled in the same way?

    Read the article

  • Podcast Show Notes: The Red Room Interview &ndash; Part 1

    - by Bob Rhubart
      The latest OTN Arch2Arch podcast is Part 1 of a three-part series featuring a discussion of a broad range of SOA  issues with three members of the small army of contributors to The Red Room Blog, now part of the OJam.biz site, the Australia-New Zealand outpost of the global Oracle community. The panelists for this program are: Sean Boiling - Sales Consulting Manager for Oracle Fusion Middleware LinkedIn | Twitter | Blog Richard Ward - SOA Channel Development Manager at Oracle LinkedIn | Blog Mervin Chiang - Consulting Principal at Leonardo Consulting LinkedIn | Twitter | Blog (You can also follow the Red Room itself on Twitter: @OracleRedRoom.) The genesis of this interview goes back to 2009, and the original Red Room blog, on which Sean, Richard, Mervin, and other Red Roomers published a 10-part series of posts that, taken together, form a kind of SOA best-practices guide, presented in an irreverent style that is rare in a lot of technical writing. It was on the basis of their expertise and irreverence that I wanted to get a few of the Red Room bloggers on an Arch2Arch podcast.  Easier said than done. Trying to schedule a group interview with very busy people on the other side of world (they’re actually 15 hours in the future, relative to my location) is not a simple process. The conversations about getting some of the Red Room people on the program began in the summer of 2009. The interview finally happened at 5:30 PM EDT on Tuesday March 30, 2010, which for the panelists, located in Australia, was 8:30 AM on Wednesday March 31, 2010. I was waiting for dinner, and Sean, Richard, and Mervin were waiting for breakfast. But the call went off without a hitch, and the panelists carried on a great discussion of SOA issues. Listen to Part 1 Many thanks to Gareth Llewellyn for his help in putting this together. SOA Best Practices Here’s a complete list of the posts in the original 10-part Red Room series: SOA is Dead. Long Live SOA by Sean Boiling Are you doing SOP’s instead of SOA? by Saul Cunningham All The President's SOA by Sean Boiling SOA – Pay Now or Pay Dearly by Richard Ward SOA where are the skills? by Richard Ward Project Management Pitfalls within SOA by Anton Gouws Viewing SOA as a project instead of an architecture by Saul Cunningham Kiss and Tell by Sean Boiling Failure to implement and adhere to SOA Governance by Mervin Chiang Ten Out Of Ten by Sean Boiling Parts 2 of the Red Room Interview will be available next week, followed by Part 3, so stay tuned: RSS Change in the Wind Beginning with next week’s program, the OTN Arch2Arch Podcast will be rechristened as the OTN ArchBeat Podcast, to better align with this blog. The transformation will be painless – you won’t feel a thing.   del.icio.us Tags: otn,oracle,Archbeat,Arch2Arch,soa,service oriented architecture,podcast Technorati Tags: otn,oracle,Archbeat,Arch2Arch,soa,service oriented architecture,podcast

    Read the article

  • Blank black screen with cursor after login -- RHEL5

    - by Sean O.
    I have a RHEL 5 machine here which is a Dell Precision T3500. I'm an Ubuntu guy, but I'm having a heck of a time with this machine. After processing its first security update, we cannot log in via the gdm greeter. A new kernel was installed; then I installed the nVidia drivers for our Quadro NVS 295. I know the X configuration is valid because the gdm greeter does display; however, upon login all we can get is a blank, black screen with a cursor. I thought perhaps our python installation was corrupted but a reinstall via yum has not helped. I have searched & googled extensively for a potential fix for this and can find nothing. Below are outputs from uname, a tail of an error in /var/log/messages, and the Xorg.conf. Can anyone suggest a course of action? [sean@cheetah ~]$ uname -a Linux cheetah.*.* 2.6.18-308.8.1.el5 #1 SMP Fri May 4 16:43:02 EDT 2012 x86_64 x86_64 x86_64 GNU/Linux [sean@cheetah ~]$ sudo tail /var/log/messages Jun 5 15:03:04 cheetah gconfd (sean-4592): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2 Jun 5 15:03:05 cheetah hcid[3855]: Default passkey agent (:1.8, /org/bluez/applet) registered Jun 5 15:03:05 cheetah pcscd: winscard.c:304:SCardConnect() Reader E-Gate 0 0 Not Found Jun 5 15:03:05 cheetah last message repeated 2 times Jun 5 15:03:06 cheetah gconfd (sean-4592): Resolved address "xml:readwrite:/home/sean/.gconf" to a writable configuration source at position 0 Jun 5 15:03:06 cheetah setroubleshoot: [program.ERROR] exception ImportError: /usr/lib/libatk-1.0.so.0: undefined symbol: g_assertion_message_expr Traceback (most recent call last): File "/usr/bin/sealert", line 952, in ? from setroubleshoot.gui_utils import * File "/usr/lib/python2.4/site-packages/setroubleshoot/gui_utils.py", line 26, in ? import gtk File "/usr/lib64/python2.4/site-packages/gtk-2.0/gtk/__init__.py", line 48, in ? from gtk import _gtk ImportError: /usr/lib/libatk-1.0.so.0: undefined symbol: g_assertion_message_expr Jun 5 15:03:07 cheetah setroubleshoot: [program.ERROR] exception ImportError: /usr/lib/libatk-1.0.so.0: undefined symbol: g_assertion_message_expr Traceback (most recent call last): File "/usr/bin/sealert", line 952, in ? from setroubleshoot.gui_utils import * File "/usr/lib/python2.4/site-packages/setroubleshoot/gui_utils.py", line 26, in ? import gtk File "/usr/lib64/python2.4/site-packages/gtk-2.0/gtk/__init__.py", line 48, in ? from gtk import _gtk ImportError: /usr/lib/libatk-1.0.so.0: undefined symbol: g_assertion_message_expr Jun 5 15:03:08 cheetah pcscd: winscard.c:304:SCardConnect() Reader E-Gate 0 0 Not Found Jun 5 15:07:01 cheetah ntpd[4114]: synchronized to 64.16.211.38, stratum 3 Jun 5 15:07:01 cheetah ntpd[4114]: kernel time sync enabled 0001 [sean@cheetah ~]$ cat /etc/X11/xorg.conf # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 295.53 ([email protected]) Sat May 12 00:34:20 PDT 2012 # Xorg configuration created by system-config-display Section "ServerLayout" Identifier "single head configuration" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "Monitor" ### Comment all HorizSync and VertSync values to use DDC: ### Comment all HorizSync and VertSync values to use DDC: Identifier "Monitor0" ModelName "LCD Panel 1600x1200" HorizSync 31.5 - 74.7 VertRefresh 56.0 - 65.0 Option "dpms" EndSection Section "Device" Identifier "Videocard0" Driver "nvidia" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

    Read the article

  • Dell Studio 1737 Overheating

    - by Sean
    I am using a Dell Studio 1737 laptop. I have been running Linux and have ran Windows recently for a very long time. I upgraded to the 10.10 distribution and since that distro, it seems that for some reason all Linuxes want to push my laptop to extremes. I have recently upgraded to Ubuntu 12.04 since I heart that it contains kernel fixes for overheating issues. 12.04 will actually eventually cool the system, but that is after the fans run to the point it sounds like a jet aircraft taking off and the laptop makes my hands sweat. In trying to combat the heat problems I have done the following: I installed the propriatery driver for my ATI Mobility HD 3600. I have tried both the one in the Additional Drivers and also tried ATI's latest greatest version. If I don't install this my laptop will overheat and shut off in minutes. Both seem to perform similarly, but the heat problem remains. I have tried limiting the CPU by installing the CPUFreq Indicator. This does help keep the machine from shutting off, but the heat is still uncomfortable to be around the machine. I usually run in power saver mode or run the cpu at 1.6 GHZ just to error on safety. I ran sensors-detect and here are the results: sean@sean-Studio-1737:~$ sudo sensors-detect # sensors-detect revision 5984 (2011-07-10 21:22:53 +0200) # System: Dell Inc. Studio 1737 (laptop) # Board: Dell Inc. 0F237N This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): y Module cpuid loaded successfully. Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 15h power sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): y Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... Yes Found `ITE IT8512E/F/G Super IO' (but not activated) Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): y Using driver `i2c-i801' for device 0000:00:1f.3: Intel ICH9 Module i2c-i801 loaded successfully. Module i2c-dev loaded successfully. Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO)y Successful! Monitoring programs won't work until the needed modules are loaded. You may want to run 'service module-init-tools start' to load them. Unloading i2c-dev... OK Unloading i2c-i801... OK Unloading cpuid... OK sean@sean-Studio-1737:~$ sudo service module-init-tools start module-init-tools stop/waiting I also tried installing i8k but that didn't work since it didn't seem to be able to communicate with the hardware (probably for different kind of device). Also I ran acpi -V and here are the results: Battery 0: Full, 100% Battery 0: design capacity 613 mAh, last full capacity 260 mAh = 42% Adapter 0: on-line Thermal 0: ok, 49.0 degrees C Thermal 0: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 1: ok, 48.0 degrees C Thermal 1: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 2: ok, 51.0 degrees C Thermal 2: trip point 0 switches to mode critical at temperature 100.0 degrees C Cooling 0: LCD 0 of 15 Cooling 1: Processor 0 of 10 Cooling 2: Processor 0 of 10 I have hit a wall and don't know what to do now. Any advice is appreciated.

    Read the article

  • Mono mkbundle issue

    - by Sean
    Hello, I am trying to bundle mono runtime with a C# a simple (console) program that does nothing, but 'hello world'. Got Cygwin, configured it all, though it fails: $ mkbundle -o x2 x.exe --deps -z OS is: Windows Sources: 1 Auto-dependencies: True embedding: C:\cygwin\home\Sean\x.exe compression ratio: 31.71% embedding: C:\PROGRA~2\MONO-2~1.1\lib\mono\4.0\mscorlib.dll compression ratio: 34.68% Compiling: as -o temp.o temp.s gcc -mno-cygwin -g -o x2 -Wall temp.c `pkg-config --cflags --libs mono-2|dos2unix` -lz temp.o temp.c: In function `main': temp.c:173: warning: implicit declaration of function `g_utf16_to_utf8' temp.c:173: warning: assignment makes pointer from integer without a cast temp.c:188: warning: assignment makes pointer from integer without a cast /tmp/ccu8fTcQ.o: In function `main': /home/Sean/temp.c:173: undefined reference to `_g_utf16_to_utf8' /home/Sean/temp.c:188: undefined reference to `_g_utf16_to_utf8' collect2: ld returned 1 exit status [Fail] Tried post with similar problem to mine here, but it didn't work either. My configuration: Windows 7 64bit Mono 2.8.1 Latest Cygwin Not sure what's the story here. Help appreciated.

    Read the article

  • OrbitFX: JavaFX 8 3D & NetBeans Platform in Space!

    - by Geertjan
    Here is a collection of screenshots from a proof of concept tool being developed by Nickolas Sabey and Sean Phillips from a.i. solutions. Before going further, read a great new article here written on java.net by Kevin Farnham, in light of the Duke's Choice Award (DCA) recently received at JavaOne 2013 by the a.i. solutions team. Here's Sean receiving the award on behalf of the a.i. solutions team, surrounded by the DCA selection committee and other officials: They won the DCA for helping facilitate and deploy the 2014 launch of NASA's Magnetospheric Multiscale mission, using JDK 7, the NetBeans Platform, and JavaFX to create the GEONS Ground Support System, helping reduce software development time by approximately 35%. The prototype tool that Nicklas and Sean are now working on uses JavaFX 3D with the NetBeans Platform and is nicknamed OrbitFX. Much of the early development is being done to experiment with different patterns, so that accuracy is currently not the goal. For example, you'll notice in the screenshots that the Earth is really close to the Sun, which is obviously not correct. The screenshots are generated using Java 8 build 111, together with NetBeans Platform 7.4. Inspired by various JavaOne demos using JavaFX 3D, Nick began development integrating them into their existing NetBeans Platform infrastructure. The 3D scene showing the Sun and Earth objects is all JavaFX 8 3D, demonstrating the use of Phong Material support, along with multiple light and camera objects. Each JavaFX component extends a JFXPanel type, so that each can easily be added to NetBeans Platform TopComponents. Right-clicking an item in the explorer view offers a context menu that animates and centers the 3D scene on the selected celestial body.  With each JavaFX scene component wrapped in a JFXPanel, they can easily be integrated into a NetBeans Platform Visual Library scene.  In this case, Nick and Sean are using an instance of their custom Slipstream PinGraphScene, which is an extension of the NetBeans Platform VMDGraphScene. Now, via the NetBeans Platform Visual Library, the OrbitFX celestial body viewer can be used in the same space as a WorldWind viewer, which is provided by a previously developed plugin. "This is a clear demonstration of the power of the NetBeans Platform as an application development framework," says Sean Phillips. "How else could you have so much rich application support placed literally side by side so easily?"

    Read the article

  • Failed to retrieve share list from server

    - by Eric Sean Tite Webber
    UBUNTU 11.10 NAUTILUS 3.2.1 We ARE able to see Windows PCs on our network from Ubuntu's NAUTILUS, yet we are NOT able to access their shares from NAUTILUS, even though they work fine with each other, i.e. each windows PC IS able access the other Windows PC's shares just fine. Please infer from this information the answers to any questions about our situation you may have. Note this is a default/pristine configuration, i.e. no changes have been made whatsoever. Our version of Ubuntu is: 11.10, NAUTILUS is 3.2.1 Linux tite-HP-630-Notebook-PC 3.0.0-15-generic #26-Ubuntu SMP Fri Jan 20 17:23:00 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux A screenshot is available upon request. Thanks in advance for your assistance.

    Read the article

  • CAMeditor v1.9 &ndash; thoughts and reflections

    - by david.webber(at)oracle.com
    We recently published the latest iteration of the CAMeditor tool on Sourceforge.net including more enhancements to the NIEM capabilities. This release represented an incremental improvement over the prior version with mostly bug fixes and patches. We’re now working on the full v2.0 release which will feature substantial improvements and new features in practically all areas.  Most importantly we are improving the dictionary handling and providing the ability to visually design new exchange schema directly from dictionary sets of components. In addition we are doing some interim release work on 1.9.x with patches and enhancements particularly to support running on Ubuntu and non-Windows platforms. And we are also providing an Ant script based deployment for the CAMV validation engine so you can do unit testing of batches of templates and XML instance samples using command line scripts. More updates will be forthcoming as we make early release versions available for testing purposes.

    Read the article

  • Google Analytics goal funnel does not recognize virtual page views

    - by Webber Smith
    I have a setup wizard with 3 steps. Since I'm using AJAX each step uses a virtual pageview with an appropriate URL for each step (see below). The pageviews are being recorded in the Content section of Google Analytics but the Goal Funnel still shows zero for each step. I've tried advise on other forums such as... Make sure Goal URL is set to Exact match Make sure no steps or the Goal URL are a parent directory of any other steps. For example, don't track /wizard/ as a Goal/step and track /wizard/step2/. Not sure why this would be a problem since it is an exact match, but it shouldn't hurt so I tried it... Require (or don't require - tried both) the first step in the funnel ...but none of these seem to work. Thoughts? Goal Settings Exact match : "/wizard/setup-complete/" Funnel Step 1 : "/wizard/step1/" Step 2 : "/wizard/step2/" Step 3 : "/wizard/step3/"

    Read the article

  • Printer Sharing Issue

    - by Sean Webber
    So I set up my printer on 12.10 to share via SAMBA. Windows 'sees' it, it will install it on windows (I have the printer driver installs but it asks for it in Windows default list.. ?), then I can print a test page to the ubuntu printer from Windows. But If I try to print something in Notepad/Wordpad it says 'Printing' but doesn't add it to the "See whats printing" list. If you do it in Google Chrome, however, it works. Any ideas?

    Read the article

  • Ubuntu 12.10 WiFi Problems

    - by Sean Webber
    I have a 32 bit machine running Ubuntu 12.10 with WiFi on it. I have a WPA2 network at home, but if I leave the USB Adapter plugged in while it boots, it infinitely keeps asking for the network password but never connects. If I plug it in after boot, it will connect but then I can't access ANYTHING on the LAN or Internet because "the DNS servers are unreachable". Now, if I leave the computer on a while, I get lucky sometimes and it MAGICALLY decides to connect for a little bit, lock the machine though and the Internet's gone again. The weirdest thing, is when I am connected but can't get to the internet, I do a netstat or ifconfig wlan0, I do have an IP address and everything. It says I'm connected but its not. I have a Realtek RTL8188CU USB adapter.

    Read the article

  • Ghosting Program for Ubuntu 12.10

    - by Sean Webber
    I am looking to figure out how to set up a mass backup system for a computer network (of about 25) and am looking for a ghosting program that makes an image of the entire system for backup/recovery purposes. While clonezilla would work.. you have to manually boot us the CD for it. I am looking for a program that runs INSIDE Ubuntu that sends a system image backup off to the network server at set times, then when needed could also be used to burn the clone back to the machine. Another words- automatically and the only time I have to do anything to it is when I need to burn a backup BACK to a 'crapped' machine. Any ideas?

    Read the article

  • Podcast Show Notes: The Red Room Interview &ndash; Part 2

    - by Bob Rhubart
    Room bloggers Sean Boiling, Richard Ward, and Mervin Chaing bring their in-the-trenches perspective to the conversation once again in this week’s edition of the OTN ArchBeat Podcast. Listen. (Missed last week? No problemo: Listen to Part 1) In this segment the conversation turns to SOA governance and balancing the need for reuse against the need for speed.  It’s no mystery that many people react to the term “SOA Governance” in much the same way as they would to the sound of Darth Vader’s respirator. But Mervin explains how a simple change in terminology can go a long way toward lowering blood pressure. Those interested in connecting with Sean, Richard, or Mervin can do so via the links listed below: Sean Boiling - Sales Consulting Manager for Oracle Fusion Middleware LinkedIn | Twitter | Blog Richard Ward - SOA Channel Development Manager at Oracle LinkedIn | Blog Mervin Chiang - Consulting Principal at Leonardo Consulting LinkedIn | Twitter | Blog And you’ll find the complete list of the Red Room SOA Best Practice Posts in last week’s show notes. The third and final segment of the Red Room series runs next week.  I have enough material from the original interview for a fourth program,  but it’ll have to wait. Also, as mentioned last week, the podcast name change is now complete, from Arch2Arch, to ArchBeat. As WPBH-TV9 weatherman Phil Connors says, “Anything different is good.”   Technorati Tags: archbeat,podcast. arch2arch,soa,soa governance,oracle,otn Flickr Tags: archbeat,podcast. arch2arch,soa,soa governance,oracle,otn

    Read the article

  • w2k3 chkdsk errors as vmware 1.8 guest

    - by Sean Kirkpatrick
    We have two Dell servers (CentOS 5.x) hosting a variety of VMs including 3 W2K3 and 1 W2K servers as guests as well as a handful of other Linux guests. Each Windows VM has 2 drives, C: and D:. on 2 of the W2K3 and the W2K boxes we have recurring errors appearing on a daily basis as reported by CHKDSK. We'll run CHKDSK /f and reboot all affected machines and the errors are reported as fixed. The next day CHKDSK will report the same errors. None of the linux guests nor either host report errors when the are rebooted. The RAID controllers are not reporting errors. We're beginning to think that these are phantom errors somehow, but I'm not willing to go to the bank on that just yet. Anybody have similar experiences or advice? Thanks! Sean

    Read the article

  • How to Open Local File in AS3?

    - by Sean
    Hi, i have some code that looks like this function main9Click(event:MouseEvent):void { var main9URL:URLRequest = new URLRequest("N:\ICT\Nationals\Unit 2\Pages\Cars"); navigateToURL(main9URL, "_self"); } mainBtn6.addEventListener(MouseEvent.CLICK, main9Click); I need to make it open so when you click on that button it opens the file Cheers Sean

    Read the article

  • - (void)alertViewCancel:(UIAlertView *)alertView is not called

    - by Sean
    Hi all I've got the problem that the UIAlertViewDelegate method - (void)alertViewCancel:(UIAlertView *)alertView is not called when I cancel a AlertView with it's cancel button. Weird is that the delegate method - (void)alertView:(UIAlertView *)alertView clickedButtonAtIndex:(NSInteger)buttonIndex works perfectly. Does anyone have an idea? Thanks in advance Sean

    Read the article

  • Change URL of WebBrowser in C#

    - by Sean
    I am designing a simple application using c# and it has a web browser in it. I need to either (preferably) refresh the page that is currently inside the broswer, or navigate to a "new" url. I tried Browser.Url = new Uri("http://www.pandora.com/"); but I get an error when I try to compile it. Error 1 Cannot implicitly convert type 'string' to 'System.Uri' c:\users\sean\documents\visual studio 2010\Projects\Pandora\Pandora\Form1.cs 51 27 Pandora What am I doing wrong?

    Read the article

  • XAML ToolTip + IsHitTestVisible="False"

    - by Sean
    We need to have mouse clicks and drags "ignored" by our View1 but the ToolTip must still function in that view. The reason is View1 is above View2 in Z-Order, so View1 can tint View2 a red color and show a warning via ToolTip; however the ToolTip accompanying View1 will not work if IsHitTestVisible="False". Anyone know a work around so the ToolTip will display on mouse move/over and the rest of mouse events are ignored by View1 and go to View2? Thanks, Sean

    Read the article

  • uitableview delegate methods are not called

    - by Sean
    hi all i got the problem that the tableview methods are not called the first time the tableview is shown. if switch back to the previous view and then click the button to show the tableview again, the methods are called this time. i've to say that i show an actionsheet while the tableview is loading. the actionsheet i call in the ViewWillAppear method. thanks in advance sean

    Read the article

  • LDAP change user pass on client

    - by Sean
    I am trying to allow ldap users to change their password on client machines. I have tried pam every which way I can think of /etc/ldap.conf & /etc/pam_ldap.conf, as well. At this point I'm stuck. Client: Ubuntu 11.04 Server: Debian 6.0 The current output is this: sobrien4@T-E700F-1:~$ passwd passwd: Authentication service cannot retrieve authentication info passwd: password unchanged /var/log/auth.log gives this during the command: May 9 10:49:06 T-E700F-1 passwd[18515]: pam_unix(passwd:chauthtok): user "sobrien4" does not exist in /etc/passwd May 9 10:49:06 T-E700F-1 passwd[18515]: pam_ldap: ldap_simple_bind Can't contact LDAP server May 9 10:49:06 T-E700F-1 passwd[18515]: pam_ldap: reconnecting to LDAP server... May 9 10:49:06 T-E700F-1 passwd[18515]: pam_ldap: ldap_simple_bind Can't contact LDAP server getent passwd |grep sobrien4 (note keeping short since testing with that account, however it outputs all ldap users): sobrien4:Ffm1oHzwnLz0U:10000:12001:Sean O'Brien:/home/sobrien4:/bin/bash getent group shows all ldap groups. /etc/pam.d/common-password (Note this is just the most current, I have tried a lot of different options): password required pam_cracklib.so retry=3 minlen=8 difok=3 password [success=1 default=ignore] pam_unix.so use_authtok md5 password required pam_ldap.so use_authtok password required pam_permit.so Popped open wireshark as well, the server & client are talking. I have the password changing working on the server. I.E. the server that runs slapd, I can log in with the ldap user and change the passwords. I tried copying the working configs from the server initially and no dice. I also tried cloning it, and just changing ip & host, and no go. My guess is that the client is not authorized by ip or hostname to change a pass. Pertaining to the slapd conf, I saw this in a guide and tried it: access to attrs=loginShell,gecos by dn="cn=admin,dc=cengineering,dc=etb" write by self write by * read access to * by dn="cn=admin,dc=cengineering,dc=etb" write by self write by * read So ldap seems to be working okay, just can't change the password.

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >