Search Results

Search found 5092 results on 204 pages for 'kernel tracker'.

Page 153/204 | < Previous Page | 149 150 151 152 153 154 155 156 157 158 159 160  | Next Page >

• How to get hp printer to select correct trays on samba shared printer

  - by dgermann

  My first post here. Clean install of 12.04.1. Previously 10.04. Have been running a p2035n printer without problem. Now, no matter what paper tray I select it prints to the top "by-pass" feeder--not the lower main tray. And when I select to print to manual feed, it does not wait for me to put in paper (like it used to), but prints immediately. The printer is on a samba share and is physically plugged into a WinXP machine. Its uri is smb:///computername/p2035n. I have tried several of the offered drivers for this hp machine, and even tried generic-laser. Same result on all. Here are some other things I have tried (losing 2-3 hours of my time!): hp-check -t reports “error: User needs to be member of group 'lp' to enable print, scan & fax. ” and “warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.” needed to download HPLIP 3.12.11 followed http://hplipopensource.com/hplip-web/install/install/index.html sh hplip-3.12.11-run says that before setup logout and then on login run hp-setup hp-setup could not find the printer ran hp-check -t again, found I was not in group lp ran hp-check --fix and it fixed that problem, asks for reboot rebooted after running update manager (new kernel) and hp-check -t shows no errors this time all the tray selections end up on the bypass tray hp-setup still cannot find the printer So is there a way to make this work? Thanks! :- Doug.

  Read the article

• Wake laptop when lid is opened?

  - by crackout12

  I have a SAMSUNG laptop, which by the experience in the last months, has been a great one. I am actually implementing some functionality to it, and since I noticed, I am able to wake up my laptop from sleep by just opening the lid on Windows 7, however, I need to press to power button to wake up in Ubuntu. Using a program called i-nex, I noted that the kernel DOES dettect a "lid switch", and I am looking forward to use it to wake up function. Any ideas? UPDATE: Thanks @yossile for bringing up some clues! However, output of command cat /proc/acpi/wakeup does not show the LID device. I still tried the second set of commands you gave me with no effect. Then I tried experimenting, guessing that LID should be named by other value, so I tried enabling the others. No victory so far. But I noticed that devices that did not have any pci listings were disabled at all time no matter what I tried. Here is the output of command cat /proc/acpi/wakeup: root@samsung:~# cat /proc/acpi/wakeup Device S-state Status Sysfs node PCE4 S4 *disabled pci:0000:00:04.0 SBAZ S4 *disabled pci:0000:00:14.2 P0PC S4 *disabled pci:0000:00:14.4 GEC S4 *disabled PE20 S4 *disabled pci:0000:00:15.0 PE21 S4 *disabled PE22 S4 *disabled pci:0000:00:15.2 PE23 S4 *disabled PWRB S5 *enabled So maybe it could be that LID is either GEC,PE21, or PE23? Still, there is /proc/acpi/button/lid/LID/state file which shows that LID is opened. Any more ideas?

  Read the article

• Diablo 3 "freezes" periodically

  - by Shauna

  I'm running Diablo 3 (start edition, digital download) on the following: Ubuntu 12.04 64-bit (stock Unity, Gnome, etc; kernel version 3.2.0-29-generic) Wine version 1.5.11 (base, from Wine's PPA, game started with setarch i386 -3) Intel i7 920 CPU nVidia GTX260 with driver version 295.49 ("post-release updates" entry within the proprietary drivers tool), dual monitors 6GB RAM Every so often (and what appears to be at random), the game video will freeze up. I can still move the mouse, and it reacts to ctrl+alt+f2 to drop into text mode, but I can't get back to the desktop (which means I can check terminal to see what's going on after launching from terminal, especially since even in windowed mode, the secondary screen gets shut off by the game), and I can't continue to play the game. In order to get it running again, I have to restart lightdm, then relaunch the game (or, in a couple of rare cases, I had to restart the computer entirely, because running sudo service lightdmn [stop/start] doesn't appear to react). Turning down the video settings seems to have helped in some cases, but not all of them. Times it's frozen on me: The beginning of The Fallen Start quest part 6 - kill the Wretched Mother, right as you walk out of New Tristram and engage in the monsters on the northern path (repeatedly froze here until I adjusted the graphics down) Within the cinematic/event upon finding Deckard Cain While fighting the skeletons to protect Deckard Cain When about to enter Leoric's passage after Cain sends you back to where you found him That's as far as I've gotten through the game so far. Additionally, this doesn't happen on other games I play and seems to only occur with Diablo 3. Has anyone else run into this issue and know a possible cause or fix, or at least know where I can look (and what to look for) to figure out why this is happening?

  Read the article

• UPDATE MANAGER UNABLE TO UPDATE

  - by muguro

  Requires installation of untrusted packages The action would require the installation of packages from not authenticated sources. i get this error every time i try updating. the system shows that it has 466 updates but fails after clicking update more details have this accountsservice apparmor apport apport-gtk apt apt-transport-https apt-utils aptdaemon aptdaemon-data at-spi2-core bamfdaemon base-files bcmwl-kernel-source bind9-host compiz compiz-core compiz-gnome compiz-plugins-default cron cups cups-bsd cups-client cups-common cups-filters cups-ppdc dbus dbus-x11 dconf-gsettings-backend dconf-service desktop-file-utils dmsetup dnsutils empathy empathy-common eog evince evince-common evolution-data-server evolution-data-server-common firefox firefox-globalmenu firefox-gnome-support firefox-locale-en fontconfig fontconfig-config fonts-liberation fonts-opensymbol foomatic-filters gcalctool gdb ghostscript ghostscript-cups ghostscript-x ginn gir1.2-atspi-2.0 gir1.2-dbusmenu-glib-0.4 gir1.2-dbusmenu-gtk-0.4 gir1.2-gst-plugins-base-0.10 gir1.2-gtk-3.0 gir1.2-gtksource-3.0 gir1.2-gudev-1.0 gir1.2-javascriptcoregtk-3.0 gir1.2-launchpad-integration-3.0 gir1.2-pango-1.0 gir1.2-rb-3.0 gir1.2-totem-1.0 gir1.2-ubuntuoneui-3.0 gir1.2-unity-5.0 gir1.2-webkit-3.0 glib-networking glib-networking-common glib-networking-services gnome-accessibility-themes gnome-control-center gnome-control-center-data gnome-desktop3-data gnome-games-data gnome-icon-theme gnome-media gnome-orca gnome-settings-daemon gnome-sudoku gnomine gnupg google-talkplugin gpgv grub-common grub-pc grub-pc-bin grub2-common gstreamer0.10-alsa gstreamer0.10-plugins-base gstreamer0.10-plugins-base-apps gstreamer0.10-x gvfs gvfs-backends gvfs-bin gvfs-common gvfs-daemons gvfs-fuse gvfs-libs gwibber gwibber-service gwibber-service-facebook gwibber-service-identica gwibber-service-twitter hdparm hplip hplip-data indicator-sound initscripts isc-dhcp-client isc-dhcp-common jockey-common jockey-gtk krb5-locales landscape-client-ui-install language-pack-en language-pack-en-base language-pack-gnome-en language-pack-gnome-en-base launchpad-integration libaccountsservice0 libapt-inst1.4 libapt-pkg4.12 libart-2.0-2 libasound2 libatspi2.0-0 libbamf0 libbamf3-0 libbind9-80 libc-bin libc-dev-bin libc6 libc6-dev libcairo-gobject2 libcairo2

  Read the article

• What packages are neccessary to have sound output from java applets?

  - by MvG

  I've got a very minimalistic setup of ubuntu precise, created using debootstrap. So please don't assume that any packages are installed just because they usually are. On that system, I'd like to play some sounds from a java applet. However, this always fails with the following error message: javax.sound.midi.MidiUnavailableException: Can not open line at com.sun.media.sound.SoftSynthesizer.open(SoftSynthesizer.java:1132) at com.sun.media.sound.SoftSynthesizer.open(SoftSynthesizer.java:1036) ... Caused by: java.lang.IllegalArgumentException: No line matching interface SourceDataLine supporting format PCM_SIGNED 44100.0 Hz, 16 bit, stereo, 4 bytes/frame, little-endian is supported. at javax.sound.sampled.AudioSystem.getLine(AudioSystem.java:476) at javax.sound.sampled.AudioSystem.getSourceDataLine(AudioSystem.java:604) at com.sun.media.sound.SoftSynthesizer.open(SoftSynthesizer.java:1066) ... 35 more As the messages mention a soft synthesizer, and pcm lines, I expect that the lack of some midi daemon is not the issue here. As far as I can tell, the alsa kernel modules are loaded, including snd_hda_intel, snd_pcm, snd_seq_midi among others. I've also included the alsa-base and alsa-utils packages in my installation. alsa-mixer looks good, using “HDA Intel PCH” as its default device. What other packages, configuration settings or daemon startups does java require to make its sound output work?

  Read the article

• What's the best structure for a repository?

  - by jpmelos

  I've looked into many open source software repositories, and I've found some common elements and somethings people do in different fashion from one another. For example, every repository has a README file, a INSTALL file, a COPYING file and stuff like that. Other things differ: Some projects, like git, have their source code in the root level, while others have the source code in a src/ folder and others, like the Linux kernel, have the source code spread in different folders in root level, that divide code by areas; Some have their tests in a t/ folder, while others in a tests/ folder, or named otherwise; Some have files about submitting patches and who the maintainers are, and those might be inside some Documentation/ or in the root level. Are there recommendations? A best practice? For example: personally, I don't like the code in the root level, git-fashion. It looks messy and confuses one trying to start as a contributor (especially because they have some code inside folders, and scripts in the root level as well, it's really messy). If I were to start a project of my own and wanted to start right from the start, are there recommendations? Best practices? How can I make a clean and clear structure? Thank you!

  Read the article

• Cannot login in account with encrypted home after update from 11.04 to 11.10

  - by martin

  After upgrading from ubuntu 11.04 to 10.10 I cannot access my encrypted home partition anymore. I can login, however all data stays encrypted. ecryptfs-mount-private gives: ERROR: Encrypted private directory is not setup properly Any idea how to fix this? Update I have several kernels installed (after the upgrade my menu.lst looks like this: http://paste.org/pastebin/view/35591) the problem is the same for all kernels. Booting from 2.6.32-27-generic and adduser --encrypt-home tes gives: Adding user `tes' ... Adding new group `tes' (1008) ... Adding new user `tes' (1007) with group `tes' ... Creating home directory `/home/tes' ... Setting up encryption ... ************************************************************************ YOU SHOULD RECORD YOUR MOUNT PASSPHRASE AND STORE IT IN A SAFE LOCATION. ecryptfs-unwrap-passphrase ~/.ecryptfs/wrapped-passphrase THIS WILL BE REQUIRED IF YOU NEED TO RECOVER YOUR DATA AT A LATER TIME. ************************************************************************ Error: Your kernel does not support filename encryption ERROR: Could not add passphrase to the current keyring adduser: `/usr/bin/ecryptfs-setup-private -b -u tes' returned error code 1. Exiting.

  Read the article

• Advice: How to convince my newly annointed team lead against writing the code base from scratch

  - by shan23

  I work in a pretty reknowned MNC, and the module that I work in has been assigned to a new "lead". The code base is pretty huge (~130K or more, with inter dependencies on other modules) , but stable - some parts have grown ugly over the years, but its provably in working state. (Our products are running for years on them, even new ones). The problem is, our lead wants to rewrite the code from scratch, to encompass "finer granularity and a proactive design". I know in my guts thats not a very good idea, but how do I convince him/the rest of the team(who are pretty much more senior than me in terms of years of exp), without sounding too pedantic myself (Thou shalt not rewrite , as Joel et al have clear articles prohibiting it)? I have a good working relation with the person concerned, and don't want to ruin it, but neither do I want to be party to a decision which would surely plague us for years to come !! Any suggestions for a milder,yet effective approach ? Even accounts of how you have tackled such a situation to your liking would help me a lot! EDIT: The code base I'm talking about is not a product/GUI, but at kernel level with all the critical functionalities for our product. I hope now you know why i sound so apprehensive !!

  Read the article

• What could be causing frequent display freezes?

  - by austen

  I just installed Ubuntu 14.04 two days ago (coming from Win8) and in the two days that I've been using it, my display has frozen four or five times. The mouse won't move but the keyboard does respond so I can use the Ctrl+Alt+Bkspc command to fix it. It seems like it might just be the display freezing because one of the times I was watching a Youtube video and the audio continued playing. I have an Nvidia graphics card with the most recent Nvidia drivers for it enabled. I see that a lot of questions about Ubuntu freezing get marked as a duplicate and pretty much always linked back to a thread about what to do when it freezes. Clearly, I've got that bit figured out already and I did read that thread for further advice. What I'm looking for though is how to fix this permanently. output from lspci -nnk | grep -iA2 VGA: 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) Subsystem: Lenovo Device [17aa:2200] Kernel driver in use: i915 Update: JohnnyEnglish pointed out that Ubuntu is using the integrated graphics, not my Nvidia card. It turns out my laptop uses Nvidia Optimus and I cannot enable only the graphics card through the BIOS. I found out about Nvidia Prime and got it set up using this article. The settings panel which allows you to select the graphics says that 'performance mode' is enabled but when I check which graphics controller is enabled through the terminal, it still says it's using the integrated graphics. I'm not sure if this could be causing the freezes but I guess it's a starting point. Any ideas on how to resolve this?

  Read the article

• The Ideal Platform for Oracle Database 12c In-Memory and in-memory Applications

  - by Michael Palmeter (Engineered Systems Product Management)

  Oracle SuperCluster, Oracle's SPARC M6 and T5 servers, Oracle Solaris, Oracle VM Server for SPARC, and Oracle Enterprise Manager have been co-engineered with Oracle Database and Oracle applications to provide maximum In-Memory performance, scalability, efficiency and reliability for the most critical and demanding enterprise deployments. The In-Memory option for the Oracle Database 12c, which has just been released, has been specifically optimized for SPARC servers running Oracle Solaris. The unique combination of Oracle's M6 32 Terabytes Big Memory Machine and Oracle Database 12c In-Memory demonstrates 2X increase in OLTP performance and 100X increase in analytics response times, allowing complex analysis of incredibly large data sets at the speed of thought. Numerous unique enhancements, including the large cache on the SPARC M6 processor, massive 32 TB of memory, uniform memory access architecture, Oracle Solaris high-performance kernel, and Oracle Database SGA optimization, result in orders of magnitude better transaction processing speeds across a range of in-memory workloads. Oracle Database 12c In-Memory The Power of Oracle SuperCluster and In-Memory Applications (Video, 3:13) Oracle’s In-Memory applications Oracle E-Business Suite In-Memory Cost Management on the Oracle SuperCluster M6-32 (PDF) Oracle JD Edwards Enterprise One In-Memory Applications on Oracle SuperCluster M6-32 (PDF) Oracle JD Edwards Enterprise One In-Memory Sales Advisor on the SuperCluster M6-32 (PDF) Oracle JD Edwards Enterprise One Project Portfolio Management on the SuperCluster M6-32 (PDF)

  Read the article

• LUKS no longer accepts my my passphrase

  - by Two Spirit

  I created a 4 drive RAID5 setup using mdadm and upgrading from 2TB drives to the new Hitachi 7200RPM 4TB drives. I can initially open my luks partition, but later can no longer access it. I can no longer access my LUKS partition even tho I have the right passphrases. It was working and then at an unknown point in time loose access to LUKS. I've used the same procedures for upgrading from 500G to 1TB to 1.5TB to 2TB. After the first time this happened a week ago, I thought maybe there was some corruption so I added a 2nd Key as a backup. After the second time the LUKS became unaccessible, none of the keys worked. I put LUKS on it using cryptsetup -c aes -s 256 -y luksFormat /dev/md0 # cryptsetup luksOpen /dev/md0 md0_crypt Enter LUKS passphrase: Enter LUKS passphrase: Enter LUKS passphrase: Command failed: No key available with this passphrase. The first time this happened while I was upgrading to 4TB drives, I thought it was a fluke, and ultimately had to recover from backups. I went an used luksAddKey to add a 2nd key as a backup. It happened again and I tried both passphrases, and neither worked. The only thing I'm doing differently this time around is that I've upgraded to 4TB drives which use GPT instead of fdisk. The last time I had to even reboot the box was over 2 years ago. I'm using ubuntu-8.04-server with kernel 2.6.24-29 and upgraded to -2.6.24-31, but that didn't fix the problem.

  Read the article

• cpufreq-selector, cpufreq-info reporting wrong max speed

  - by dty

  Hi, I've just built a new machine with a Core i5-760 CPU. Max speed is 2.80GHz (turbo mode notwithstanding). I've also done a vanilla install of Ubuntu 10.10. I've added the cpufreq-selector applet to the top panel, and its menus only allow me to select up to 2.39GHz. If I select the "performance" governor, it also shows 2.39GHz. cpufreq-info reports: $ cpufreq-info cpufrequtils 007: cpufreq-info (C) Dominik Brodowski 2004-2009 Report errors and bugs to cpufreq@vger.kernel.org, please. analyzing CPU 0: driver: acpi-cpufreq CPUs which run at the same hardware frequency: 0 1 2 3 CPUs which need to have their frequency coordinated by software: 0 maximum transition latency: 10.0 us. hardware limits: 1.20 GHz - 2.39 GHz available frequency steps: 2.39 GHz, 2.26 GHz, 2.13 GHz, 2.00 GHz, 1.86 GHz, 1.73 GHz, 1.60 GHz, 1.46 GHz, 1.33 GHz, 1.20 GHz available cpufreq governors: conservative, ondemand, userspace, powersave, performance current policy: frequency should be within 1.20 GHz and 2.39 GHz. The governor "ondemand" may decide which speed to use within this range. current CPU frequency is 1.20 GHz. cpufreq stats: 2.39 GHz:13.74%, 2.26 GHz:0.09%, 2.13 GHz:0.08%, 2.00 GHz:0.08%, 1.86 GHz:0.07%, 1.73 GHz:0.07%, 1.60 GHz:0.08%, 1.46 GHz:0.08%, 1.33 GHz:0.11%, 1.20 GHz:85.61% (15560) [...CPUs 1-3 elided, but similar...] Any idea how to get Ubuntu and the various tools to recognise this as a 2.80GHz processor? And ideally to report the actual speed when running in turbo mode too, but that's not critical. Edit: I should probably add that the BIOS (& Windows) are quite happy that it's a 2.80GHz CPU. Thanks.

  Read the article

• How do I re-enable the backlight?

  - by Scott Severance

  Since Oneiric, if I leave my machine (HP Mini 110 netbook) unattended and it goes into power-save mode, the backlight gets disabled. How can I turn it back on? Note that the keyboard backlight controls (Fn+F4 and Fn+F3) don't have any effect in this situation. I've already filed a bug, but filing a bug doesn't fix my problem. I tried this workaround posted in this bug report dealing with Acer laptops: sudo setpci -s 00:02.0 F4.B=0 However, if anything, that command makes things worse. In the general case, I can see a little bit if I'm in a dark room with a flashlight aimed just so. But after running setpci I can't see anything. And I find the setpci documentation to be utterly incomprehensible, so I don't know whether I need to tweak my command somehow or whether I'm completely barking up the wrong tree. Update: I've found a workaround: I'm now booting with the kernel parameter acpi=off. This disables power management, which prevents the machine from going into power saving mode and thus failing to come back up correctly. Of course, not having power management means that I can't use suspend or do anything to manage power other than powering it off (even then, I have to manually use the power switch). Also, it prevents me from using Unity 3D or Gnome Shell, forcing me into Unity 2C or Gnome Classic. So, I'd really like to be able to stop using this hack.

  Read the article

• 14.04 LTS Unity no longer boots after last 94 MB update

  - by Harryg123

  I am running 14.04 LTS, Unity, on an HP Pavillion 15, 4GBRAM, 750 GB hdd, I-5 machine, with AMD 8600M graphics card built in. I have disabled the dash and all Ubuntu spyware. I have been faithfully loading all updates as they appear. This morning it asked for a 94 MB update (bringing kernel to .27, I think. Now, I can boot, get to login screen, but it freezes after that. Keyboard doesn't work at that point, but mouse does. I booted into recovery mode, tried to run in generic graphics mode, -- system again froze. I also pressed [esc] during boot, but saw nothing strange; then text disappeared and was replaced by login screen. I am not a hobbyist; this is a production machine and I have a lot of work to do today. Having a standard software update render my machine completely useless... sigh. Perhaps the simplest thing to do would be to revert to the previous configuration. How do I do that? I can boot into recovery mode. But I have no idea how to proceed. TIA for all help. -Harry

  Read the article

• Fresh install of Ubuntu 12.10 won't boot on Asus X101CH Eee PC

  - by Najdmie

  I did a fresh install of Ubuntu 12.10 in my Asus X101CH Eee PC, using a live usb which I made using startup disk creator, replacing Ubuntu 12.04. The installation ran smoothly, but when I boot, it goes to a purple screen for a second, then a lot of text like the following shows up in sequence: Starting crash report submission daemon [OK] Starting CPU interrupts balancing daemon [OK] Stopping save kernel messages [OK] _ And the cursor just keeps blinking for hours. I can't log in. Pressing Alt + F2 did not bring me to console mode. I thought it might be a partition problem so I formatted the whole disk, by creating a new partition table using gparted in Ubuntu 12.04 live USB. I noticed that I can't try Ubuntu using 12.10 live USB either; it just went to a blank screen when I hit the 'try ubuntu' button. But the same problem arose. I even changed the pen drive for the live USB a couple of times. I happened to know that the Intel Atom N2600 Cedar Trail CPU in my computer is not well supported in Linux, I managed to install its drivers in Ubuntu 12.04, although the computer went blank during the installation.

  Read the article

• Fan always on and overheating problems on HP G62

  - by Dave

  I have a HP G62 with i5 processor, 4G Ram and ATI HD 5470. Started using Ubuntu 4 months ago, first was 11.10 and after 12.04. Everything worked perfectly until some weeks ago when my cpu fan became "crazy" and I mean by this always on, noise and overheating problems, for sure if I put a glass with water in some minutes will boil (and I mean it). There can be a bug in the last kernel or any other Ubuntu's official update? And by the way CPU fan is cleaned like a new born baby; Used jupiter and all those stuff (lm-sensor, psensor...) - same problem; Don't ask me to install ATI drivers because will work like sh#t (interface laggy as HD 5470 isn't supported by Ubuntu) and I can't even open ATI Catalyst (error when I try to open it), more than this I always used open source drivers and as I said, worked perfectly (3d, effects). Right now I'm back to Windows and everything is working perfectly but my main problem is that I get used with Ubuntu and kinda weird to use windows again. I want back my nice and almost perfect Ubuntu. Thanks, Dave

  Read the article

• Why does video playback lag/freeze when I go into full-screen mode?

  - by RanRag

  When I try to play my video files in SMPlayer it works fine but as soon as I switch to fullscreen mode(16:9) following thing happens: 1) Video starts lagging. 2) Audio and video goes out of sync. 3) CPU usage rises to ~50%. 4) SMPlayer starts to hang. My current SMPlayer configuration: 1)Video Output Driver = x11(slow) 2)Audio Output Driver = alsa(0.0-HDA Intel) 3)Cache = 8192 KB 4)Threads for decoding(MPEG-1/2 and H.264 only = 2 Things I tried solve this problem: 1) Tried changing video o/p driver to xv,gl. 2) Tried changing audio o/p driver to pulse. 3) Tried increasing cache size and also tried using nocache. Everything works fine on windows but I don't want to switch to windows just to play video files. My system config: Acer Aspire One D270 Atom N2600(Cedar Trail) 1.6GHz 2GB Memory Intel GMA 3600 graphics. Ubuntu 12.04 Kernel Release: 3.2.0-23-generic-pae Rest all things are working fine I have no resolution issue, bluetooth, wireless also working fine. Just ask me to submit any other log file I will be happy to post. SMPlayer log MPlayer Terminal output Codec Information(currently playing file):

  Read the article

• Are the Ubuntu ISO images updated From release .ubuntu.com

  - by tijybba

  Just got idea from this(may not be related though) question however. Are the ISO images from the official site updated with updates in Core Ubuntu system , like Kernel Updates , desktop Environment Updates(unity), i mean Updates of BASE system including X-org, Office suite, Package Manager , Update manager or Gnome Base Modules, those released in update Branches like precise-Updates branch. The reason i am asking this is , if i download the ISO image of Ubuntu 12.04 Say after two or three months from release , i have to do an update of approximately 200~300 MB's size. So why are these ISO images not updated to recent updates, i am aware that all of the components are not updated at the same time , but let's say after One month from actual release ( Both LTS and normal releases), the updated components can be added to form a Updated ISO in regular intervals, which provides new users to use latest versions and features with improved stability and less bandwidth Consumption. I am not mentioning the idea of comparison to Rolling Release , or External PPA's added updates , and neither Netinstal but the ISO of updated Packages .This can be provided as optional download. Since my question is within the boundary of Official updates releases so stability could not be the reason. I guess there are custom packagers out there , but having an official option would be better. It helps in distributing Newest ISO OS which impresses a lot new users , since it makes availability of newer features and a faster system ofcourse. Another reason of asking this is here. Edit: Since almost all new (Desktop) users download the Default ISO's having one or few issue , which may have been corrected in following updates. But most of new laptop users i encountered gave up because of it , so should i suggest ,for laptop not listed on Certified H/W list , to try daily Builds , if needed.

  Read the article

• 1.5 TB USB Drive failed to mount

  - by user89348

  Seagate 1.5Tb FreeAgent USB Hard Drive. Formatted FAT32. I figure it is 75% full. Used to work fine in XUBUNTU it shows up in Cairo Dock but when I click on it I get "failed to mount drive'. Nautilus does not display the icon nor does Thunar. Windows Vista will no longer recognise drive either. Back Track 5R3 also no longer fails to mount it. BUT and here is the BIG BUT my Pioneer DV-410 reads the files and plays the everything just fine. I believe this all happened after an unclean shutdown / XUbuntu 12.10 system freeze. Why can't XUBUNTU mount this drive when a crappy 13 year old DVD player can mount it. I am desperate to back up the data before just in case the drive becomes completely unreadable. Using XUBUNTU 12.10 Quantal current 3.5.0.17 Kernel (past 3 Kernels wont read it either) and all newest apt-get update / dist-upgrade are applied. I will post any other info you folks request as needed. Additional info as requested by githlar. $ sudo fsck.vfat /dev/sdb dosfsck 3.0.13, 30 Jun 2012, FAT32, LFN Read 512 bytes at 0:Input/output error $ lsusb Bus 001 Device 003: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter Bus 002 Device 002: ID 0bc2:3001 Seagate RSS LLC Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

  Read the article

• Chrome window controls in xubuntu 12.04

  - by Norbert

  I'm a long time ubuntu 10.04 LTS user, very used to having window controls on top left borders. New computer with new video card requires newer kernel. Unity doesn't suit and much googling turned up recommendations for xubuntu. Installed 12.04 and first aggravation is window controls at upper right a la Windows. No problem ... Settings Manager - Windows Manager - rearrange button layout Fixes everything until ... I abandoned firefox long ago because of memory leak issues and general fat. I fetch a current version of chrome (19.0.1084.52) and install. Once adblock is added and it's the default browser, everything's great. Except ... Alone among all applications, chrome will not honour the window manager's preferred button layout. Buttons are at upper right no matter what I try. Uninstall and then reinstall: nope. Trawl through /home/user/.config/google-chrome/* looking for a likely setting: nope. Search the web: nothing useful. How do I get chrome's window decoration in sync? Thanks very much for any and all help.

  Read the article

• Can no longer boot with rEFIt and Grub on early 2006 MacBook Pro

  - by Don Quixote

  I don't know what happened to cause this. I have Snow Leopard, Ubuntu 11.04 Natty Narwhal and Windows XP SP3 on my early 2006 MacBook Pro. It is a Core Duo unit, NOT Core 2 Duo, so it is 32-bit only - Model Identifier MacBookPro1,1. I use rEFIt 0.14 for my boot menu. For some reason neither XP nor Ubuntu would boot anymore. I'd just get a black screen with a rapidly flashing underscore in the top-left corner. Having both those OSes failing to boot suggested a problem with the boot loader in my MBR. The rEFIT partition tool verified that my MBR partitions were still synced with my GPT partitions, so I rewrote my MBR partition table with fdisk while booted from Parted Magic: # fdisk /dev/sda (fdisk warns about the disk having a GPT. I press on anyway.) p (Print the existing partition table to make sure it's OK.) w (Write the old partition table back to disk. This also writes a new MBR boot loader.) After this XP would boot but Ubuntu would not, with the same symptom. Now I used update-grub while chrooted into Ubuntu from Parted Magic: # mount /dev/sda3 /mnt # mount --bind /dev /mnt/dev # mount --bind /sys /mnt/sys # mount --bind /proc /mnt/proc # chroot /mnt Chroot issues some warnings about not being able to identify some group IDs. I don't know why that happens, or whether it is a problem. At this point while I am still booted off of Parted Magic's kernel, I am running from Natty's filesystem. # update-grub Update-grub detects each of my operating systems then claims to complete successfully, but still won't boot. I asked this same question over at rEFIt's Sourceforge support forum but there have been no replies yet. I also Googled quite a bit, and see many who have the same black screen problem, but none of their situations seem quite like mine. Thanks for any help you can give me. -- Don Quixote

  Read the article

• Unity 3D doesn't work on ubuntu 12.04 LTS in virtual box hosted by Windows 7 64bit

  - by Mario

  Can't google out the solution through some time so I'm asking here. I have installed Linux Ubuntu 12.04 LTS in virtual box hosted by Windows 7 64bit Simple my 3D stopped working after some kernel headers update<<< few months ago. Just like that. I don't member which version was it. In meantime there was 2 or 3 new releases of VirtualBox which I have installed. Every time I am updating VirtualBox Guest Additions to the newest version. My 3D in Ubuntu still doesn't work. root@pjadmin-VirtualBox:~# /usr/lib/nux/unity_support_test -p OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 0x300) OpenGL version string: 2.1 Mesa 8.0.2 Not software rendered: no Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no My graphics card in PC is ATI 6850. Please help.

  Read the article

• Oracle Database 12c and Oracle Solaris 11 DTrace

  - by Larry Wake

  As you may have heard, Oracle Database 12c is now available for Oracle Solaris and Oracle Linux. Among other things, that means we now have the opportunity to share some of the cool things the Oracle Database and Oracle Solaris engineering teams have been doing together. And here's a good one: In this screencast, Jon Haslam describes how on Oracle Solaris 11, DTrace is now integrated into Oracle Database V$ views to provide a top-to-bottom picture of a database transaction I/O -- from storage devices, through the Oracle Solaris kernel, up to Oracle Database 12c itself: With this end-to-end view, you can easily identify I/O outliers -- transactions that are taking an unusually long time to complete -- and use this comprehensive data to identify and mitigate storage system problems that were previously extremely hard to debug. This is a great example of the power of DTrace, which is just about to celebrate its 10th anniversary in the wild. The screencast has some nice examples of DTrace's power on its own, as well as diving into the DTrace/Oracle Database 12c synergy. There's more, of course.  Over on the OTN Garage blog, Rick Ramsey has put together a nice compendium of ways the OS makes the database scream, and Ginny Henningsen's written an article on the same topic.  And, we've also got an OTN page that digs further into Oracle Database / Oracle Solaris synergies.

  Read the article

• Boot failure randomly. Can someone help?

  - by desgua

  I often get stuck at the boot on battery. I can suspend and hibernate without any trouble (even on battery). If I plug the energy cable everything goes right most of the time (edited June 13). Adding "acpi=off" doesn't solve the issue. Disabling power save from LAN at BIOS doesn't solve this too. Memory test seems to be ok: I can even compile a kernel without a problem: Has someone a tip for this? (I have the same questions marks in my mind as the image shows if not more :-/ ) obs.: this is an upgraded installation from Natty alpha. edited I (May 22): I've installed a brand new final 11.04 and got the bug again. edited II (June 13): I thought it was solved but it is not. After spending eight days off, the same problem happened even with the power cable connected. I had to reboot about 6 times until success. edited III (June 14): I can boot (even with battery) if I disconnect the cable and take off the battery for a few seconds. This lead me to conclude that maybe something is kept into memory of some hardware. Maybe or maybe not related but I also have touchpad issues (jumps) with this machine. edited IV (June 25): I opened gconf-editor and went to apps gnome-power-manager and disabled everything possibly related to suspend or hibernate. No help. Also I grabbed a Fedora live usb pendrive and got the same problem: So I think it is a hardware problem related issue.

  Read the article

• Archbeat Link-O-Rama Top 10 Tweets for October 2013

  - by OTN ArchBeat

  What caught the attention of the 1,988 people who follow @OTNArchBeat last month? The answer is below, in the list of Top 10 Tweets for October 2013 RT @java: Which women in tech inspire you? Blog about them on Ada Lovelace Day! #ALD13 Oct 10, 2013 at 11:14 AM RT @ORCL_Linux: New blog post: Announcing Unbreakable Enterprise Kernel Release 3 for #Oracle #Linux Oct 21, 2013 at 07:11 PM RT @glassfish: Quick & Dirty How-to Guide: Install #GlassFish 4 on #RaspberryPi. Creating an #IoT infra via @MkHeck Oct 27, 2013 at 07:19 PM RT @java: Nighthacking with James Gosling, interview from Hawaii, watch live Oct. 23, 11am PT #java Oct 21, 2013 at 11:26 AM RT @ensode: "Oracle has posted blogs on how to migrate from #Spring to #JavaEE" I wrote the linked article Oct 07, 2013 at 10:53 AM SOA and User Interfaces - by @soacommunity @hajonormann @gschmutz @t_winterberg et al #industrialsoa Oct 03, 2013 at 01:17 PM RT @oracleace: Welcome and congrats to new #ACEDs @kevin_mcginley and Rene van Wijk @MiddlewareMagic Oct 25, 2013 at 12:59 PM SOA in Real Life: Mobile Solutions by @soacommunity @HajoNormann @gschmutz @t_winterberg et al #industrialsoa Oct 28, 2013 at 09:23 AM RT @OracleAnalytics: Curious to how big #oow13 was? Here’s an infographic to show you some of the stats. Oct 25, 2013 at 01:13 PM Free Poster: ACM in Practice >> thanks to @dschmeid @hajonormann @torsten_winterberg @tbmaier @gschmutz et al. Oct 16, 2013 at 09:56 AM Thought for the Day "You can converge a toaster and a refrigerator, but those things are probably not going to be pleasing to the user." — Tim Cook, CEO of Apple Inc. (Born November 1, 1960) Source: brainyquote.com

  Read the article

< Previous Page | 149 150 151 152 153 154 155 156 157 158 159 160  | Next Page >