Search Results

Search found 114096 results on 4564 pages for 'web server'.

Page 153/4564 | < Previous Page | 149 150 151 152 153 154 155 156 157 158 159 160  | Next Page >

  • Windows Server 2012 Branchcache vs. DFS-R

    - by TheCleaner
    Warning, subjective question ahead! But hopefully a good one that won't get closed. SCENARIO: I have a branch office that currently has no on-premise server. They access everything including a DC across a 12Mbps WAN link (MPLS). The link isn't saturated, averaging around 20% utilization. The circuit is very stable and has a high SLA and excellent uptime. However, large file transfers (mainly reads, not writes) from the file server across the WAN can be slow. We don't currently utilize DFS. RESEARCH DONE: I'm aware of WAN acceleration, using either dedicated hardware (Riverbed) or a dedicated software VM (Silver Peak) for example. But the pricing is outside of our current budget and the need isn't quite there yet from our perspective (since the issue is mainly in a "pull" scenario not necessarily push/pull). I'm mainly looking at deploying a Windows server at this branch office and either utilizing DFS-R or BranchCache. Looking at a table comparison and assuming we are looking at a "hosted branchcache server" and not simply distributed: It would appear there are benefits to both, even if both are "hosted" on a server. QUESTIONS I ACTUALLY HAVE: In what scenarios do each of these techs shine and where do you choose one over the other? Looking at a hosted Branchcache server, can you set "pre-fetching" of certain folders/files on the central file server so that they are immediately accessible locally at the branch? Do you have to do this on a schedule (if it is possible)? Looking at DFS-R my concern (and apparently solved with 3rd party apps) is file locking and making sure the file gets updated properly during a write operation (ie, making sure if both copies are accessed and both are written to, which file takes precedence and what happens to the changes?). Ideal it would seem would be to lock any alternate replicas of the data, but is it really that big of an issue? Does Branchcache lock the central file for editing? Does branchcache only transmit the deltas back to the central file of what has changed? Would either technology be ill advised if the branch office server was going to be utilized as a domain controller as well?

    Read the article

  • Installing WindowsAuthentication breaks authentication / web.config?

    - by Ian Quigley
    I have a clean Windows 2008 R2 box (on a VM) and have installed IIS 7.5 with default options. I then copied a website to it (from Windows 7, IIS 7) and after a little tweaking the website is working fine. The website is currently using and working with Anonymous Authentication. I have gone back to the Windows Components/Sever Manager, Roles - Security and ticked and installed Windows Authentication. When I check my server in IIS (top level above sites) - Authentication, I see Anonymous Authentication (enabled) ASP.NET Impersonation (disabled) Forms Authentication (disbaled) Windows Authentication (enabled) When I check my default website - Authentication, I see as above but "Retrieving status" and an error dialog saying There was an error while performing this operation. Details: Filename c:\inetpub\wwwroot\screwturnwiki\web.config Line number: 96 Error: This configuration section cannot be used in this path. This happens when the section is being locked at the parent level. Locking is either by default (overriderModeDefault="Deny"), or set explicity by a location tag with overrideMode="Deny" or the legacy allowOverride="False". I have tried hand editing the web.config with no success. (How to use locking in IIS7 Configuration) UN-installing Windows Authentication happily returns my site to working with Anonymous Authentication, and allows me to enable/disable these three options. FYI. I am using ScrewTurnWiki with the Active Directory plug in. It all works fine under Windows 7 IIS 7 locally (has been for months) Web.Config <system.webServer> (edit) <handlers> ( deleted removes/adds ) </handlers> <security> <authentication> 96: <windowsAuthentication enabled="true" useKernelMode="true"> <extendedProtection tokenChecking="Allow" /> <providers> <clear /> <add value="NTLM" /> <add value="Negotiate" /> </providers> </windowsAuthentication> </authentication> </security>

    Read the article

  • The proxy server received an invalid response from an upstream server

    - by chandank
    I have tomcat server behind the apache. I am using mod_ssl and reverse proxy to the tomcat. All are running at default ports. The full error is as follow. ack Proxy Error The proxy server received an invalid response from an upstream server. The proxy server could not handle the request POST /pages/doeditpage.action. Reason: Error reading from remote server If I clean the browser cache the error goes away and comes back after few attempts. I test the same on Chrome/Firefox/IE on Windows platform. Wondering it works perfectly on Linux based Chrome/Firefox. I googled a lot there are few answers at stack overflow but I am not able to find my answer. Is this a server side problem? because so many browsers cant be wrong at same time on Windows.

    Read the article

  • log shipping of biztalk database on SQL server 2008 standard edition

    - by Manjot
    Hi, I want to do log shipping for biztalk databases on SQL server 2008 standard edition (server A) to another SQL server 2008 standard edition (server B). I was told that for biztalk, logshipping is not like standard logshipping. I was able to find 2 links: http://msdn.microsoft.com/en-us/library/cc296836%28v=BTS.10%29.aspx http://msdn.microsoft.com/en-us/library/cc296741%28v=BTS.10%29.aspx but they are not talking about SQL 2008 servers. Can anyone please help in this? Thanks in advance

    Read the article

  • Small web server hardware advice

    - by Dmitri
    We need to build a new web server for our organization. We have around 100 hundred small traffic web sites, so our hardware requirements are not too tough. We run CentOS 6, Varnish+Apache, PHP, MySQL, Typo3 CMS for most of websites. Here's a hardware we want to buy: SuperMicro X9SCA-F-O (we need to have a remote management capability) (or better X9SCM-F?) Intel Xeon E3-1220 v2 2*4Gb DDR-III 1600MHz Kingston ECC (KVR16E11/4) (currently we have 4gb, and it feels like enough, so no reason for 16gb yet). Procase EB140-B-0 (1 unit) PSU 350W Procase MG1350, Active PFC We already have: Intel 335 120GB SSD (for OS, databases and important websites). 2*2tb WD Green RAID1 (for other data and backups). Does it look like a reasonable choice for our needs? Any issues with hardware compatibility? Any other notes?

    Read the article

  • Web based library management (FOSS) application

    - by pgb
    I'm looking for a FOSS web-based library management application. I want to manage the few books we have at our company, and I'm looking for applications that provide a simple web interface to: Add new books. Search for books. (Not Required) Place holds on books. My ideal would be something like Delicious Library, but web based and open source. I've looked at Koha (which I could not install), Emilda, which seems to be a dead project (last emails are from 2006 and I could not install it) and VuFind which looks awesome but doesn't provide (or I could not find) an interface to add new records to the library. Any suggestions?

    Read the article

  • 'Cannot get iis pickup directory' in Windows Server 2012

    - by Meat Popcicle
    Our system moved from Windows Server 2003(Enterprise SP2) & IIS 6. And new system is Windows Server 2012(Standard) and IIS 6(for smtp mail) & 8. I copied all of web application files and IIS settings, another function is ok but.. email system is something wrong. for example, --------------------------------------------------------------------------------------- exception: system.Net.Mail.SmtpException: cannot get iis pickup directory. line 284: SendMail sendmail = new SendMail(); line 285: sendmail.GetSendMail(messagefrom, Useremail, mailsubject, message); stack trace: [SmtpException: cannot get iis pickup directory.] System.Net.Mail.IisPickupDirectory.GetPickupDirectory() +1894 System.Net.Mail.SmtpClient.Send(MailMessage message) +1956518 CommonDll.SendMail.GetSendMail(String messagefrom, String Useremail, String mailsubject, String message) +466 ASP.common_users_courserecordadd_aspx.AddBtn_Click(Object sender, EventArgs e) in d:\"sourcefile.aspx":285 System.Web.UI.WebControls.Button.OnClick(EventArgs e) +115 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +140 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +29 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2981 Microsoft .NET Framework v:2.0.50727.6407; ASP.NET v:2.0.50727.6387 --------------------------------------------------------------------------------------- in Develop server(2008 R2 Ent SP1, IIS6 & 7.5), it works well. confused.

    Read the article

  • Cant access a remote server due mistake by setting firewall rule

    - by LMIT
    I need help due a my silly mistake! So for long time i have a dedicate server hosted by register.it Usually i access remotly to this server (Windows 2008 server) by Terminal Server. Today i wanted to block one site that continually send request to my server. So i was adding a new rule in the firewall (the native firewall on windows 2008 server), as i did many time, but this time, probably i was sleeping with my brain i add a general rules that stop everything! So i cant access to the server anymore, as no any users can browse the sites, nothing is working because this rule block everything. I know that is a silly mistake, no need to tell me :) so please what i can do ? The only 1 thing that my provider let me is reboot the server by his control panel, but this not help me in any way because the firewall block me again. i have administrator username and password, so what i really can do ? there are some trick some tecnique, some expert guru that can help me in this very bad situation ? UPDATE i follow the Tony suggest and i did a NMAP to check if some ports are open but look like all closed: NMAP RESULT Starting Nmap 6.00 ( http://nmap.org ) at 2012-05-29 22:32 W. Europe Daylight Time NSE: Loaded 93 scripts for scanning. NSE: Script Pre-scanning. Initiating Parallel DNS resolution of 1 host. at 22:32 Completed Parallel DNS resolution of 1 host. at 22:33, 13.00s elapsed Initiating SYN Stealth Scan at 22:33 Scanning xxx.xxx.xxx.xxx [1000 ports] SYN Stealth Scan Timing: About 29.00% done; ETC: 22:34 (0:01:16 remaining) SYN Stealth Scan Timing: About 58.00% done; ETC: 22:34 (0:00:44 remaining) Completed SYN Stealth Scan at 22:34, 104.39s elapsed (1000 total ports) Initiating Service scan at 22:34 Initiating OS detection (try #1) against xxx.xxx.xxx.xxx Retrying OS detection (try #2) against xxx.xxx.xxx.xxx Initiating Traceroute at 22:34 Completed Traceroute at 22:35, 6.27s elapsed Initiating Parallel DNS resolution of 11 hosts. at 22:35 Completed Parallel DNS resolution of 11 hosts. at 22:35, 13.00s elapsed NSE: Script scanning xxx.xxx.xxx.xxx. Initiating NSE at 22:35 Completed NSE at 22:35, 0.00s elapsed Nmap scan report for xxx.xxx.xxx.xxx Host is up. All 1000 scanned ports on xxx.xxx.xxx.xxx are filtered Too many fingerprints match this host to give specific OS details TRACEROUTE (using proto 1/icmp) HOP RTT ADDRESS 1 ... ... ... 13 ... 30 NSE: Script Post-scanning. Read data files from: D:\Program Files\Nmap OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ . Nmap done: 1 IP address (1 host up) scanned in 145.08 seconds Raw packets sent: 2116 (96.576KB) | Rcvd: 61 (4.082KB) Question: The provider locally can access by username and password ?

    Read the article

  • Using Performance Monitor To Get IIS7 Response Turnaround Time

    - by alphadogg
    I have a MVC2 web application on W2KR2/IIS7 that I'd like to benchmark/monitor. Some XHR requests by a browser-based client are suddenly taking 8-10 sec when they used to take much less time (as per Chrome Developer Tool timings). The underlying SQL Server queries, using the same params, runs in 1.4s according to total execution time client statistics from SSMS. I'm assuming that there are various counters that can specifically dissect time taken/waiting/processing between IIS7 itself and the web application? For example, can I check how long it takes to get a response from IIS7 app and DB? How about how long it takes to serve IIS7?

    Read the article

  • Moving Server to new Hardware - SBS 2008

    - by MikeT505
    Hi, We have very quickly out-grown our Small Business Server 2008 current hardware and have decided to purchase a complete new server. What is the best and easiest way to move the server to new hardware? It is one complete box, we do not have any SAN's or any complicated setup. We do have a couple of SQL databases running on the server and we also use Exchange. I'm sure there must be some easy way to move everything :-)

    Read the article

  • 2 Servers setup for redundency, backup

    - by minal
    I presently have 1 dedicated virtual server running my website/blog/mail, etc. This is on Hyper-V with 512MB RAM. Windows Web2008. With the VM, I have these running within it: SmarterMail – for emails MS DNS – I have my own nameservers on this server SQL Express IIS7 2 IP Address I have now leased 2 physical servers : P4 2.6Ghz 1GB RAM 80GB HDD. With these new servers, I get 2 IPs per server as well. These are running Windows 2008 Standard. With the VM the HDD was obviously on a RAID setup so I was not worried about hardware issues as it fell on the provider to manage. However, with the new servers the HDD is not RAID’d, hence my concern is that if it fails I need a backup position. What would be the most ideal setup to go for? I am thinking: Server 1: (Web/PrimaryDNS) DNS – NS1 SQL Express – OFF turn on when required, ie. Server2 is down SmarterMail – OFF turn on when required, ie. Server2 is down IIS 7 Server2:(SQL/Backup) DNS – NS2 SQL Web Edition SmarterMail IIS 7 How can I set it up so that if 1 goes down I can have everything on 2 instantly or by manual switching over. I am confused as other DNS servers will cache the web servers IP address for requests, and if that server goes down, the backup server will have a different IP. How do I make this work? I will be doing routine backups, in which case I will keep copies of backups on both servers. If I am copying the same stuff on both servers like a mirror then I am losing on using the true performance out of it. It's like 1 server is always on standby. Ideally I want SQL and web on 2 diff machines for best performance. If Server1 goes down, I should be able to switch to Server2 fairly easily. I don't have a problem with manual intervention to start the sql/mail services, etc. In terms of scalabilty, the VM has coped pretty well to date. Moving forward the SQL and IIS workload is going to double pretty quickly. Some ideas would be great.

    Read the article

  • Virtual server hardware to simulate 3-4 node web farm

    - by frankadelic
    I would like to get a dedicated server to run VMWare, VirtualBox, or similar. On this box, I would like to host 3-4 virtual instances of Linux, to act as nodes in a web farm. Performance is not that important, this would only be for testing and experimenting. I need something sub $1000 (including tax/shipping). Can someone recommend a pre-built server that would do the trick? I am pretty ignorant of hardware so building one is not going to work for me. Also, would I need multiple network cards to simulate a web farm or can the virtualization software handle that for me. Thanks

    Read the article

  • Remote administer Network Policy Server

    - by Jason Stangroome
    In our domain I have a Windows Server 2008 R2 machine "GWY" with the Network Policy and Access Services role installed. From this machine I can open the Network Policy Server management console to administer this role. However, I have another Server 2008 R2 machine "WKS" in the domain where we have all the management consoles installed so we can manage all the servers from one location. I cannot find how to access the Network Policy Server console on this machine though.

    Read the article

  • Configuring Windows 2003 As A Router

    - by Sean M
    I am trying to configure a Windows 2003 server to act as a router, so that the two subnetworks that I'm dealing with can communicate with one another without NAT. I am mostly sure that I have configured Windows 2003 incorrectly, and I'm finding it very difficult to drill down through Google results to something helpful. I have a 192.168.1.0/24 network that is my "production" network (in the sense that I'm in trouble if I screw it up) and a 10.0.0.0/8 network that is my test network. The 192.168.1.0 network is ruled by a gateway whose routing table looks like this (my address redacted): The Windows 2003 server, "prime," is multihomed. Its network adapters are at 192.168.1.122, (as seen above), 10.0.0.1, and 10.0.0.2. I added the Routing and Remote Access role to it, and enabled LAN routing. I do not have it using RIP or other routing protocols. Its current routing table is shown below. To me, it looks like all of the right routes are there for traffic to pass between the 192.168.1.0 network and the 10.0.0.0 network. However, traffic does not pass. The 10.0.0.11 and .12 clients cannot be contacted from the 192.168.1.0 network. When I use traceroute to try to get to them, the trace gets to the Windows 2003 server's 192.168.1.122 address, then produces nothing but "* * *" timeouts. When I try to traceroute to 192.168.1.1 from a 10.0.0.0-network client, I get "destination host unreachable." However, I know that the routing is working at least a little, because from the 192.168.1.0 network, I can connect to the Windows server just fine by referring to it as 10.0.0.1. What static routes would allow me to contact 10.0.0.11 and .12 from the 192.168.1.0 network? Is it possible to tell the Windows server "since you are a DHCP/DNS server, you already know routes to get to machines that are getting IP addresses from you, please add those to your routing table" ? Will using RIP or OSPF on the Windows server actually be helpful in this situation?

    Read the article

  • Posting data from multiple servers routing through one server to client server

    - by Swaroop Kundeti
    I have 5 webservers behind Load balancer and we have a client server at other end. Client has white listed my 5 webserver public ip so that my webservers will post a file to the client server. Here the problem is my webservers is going to increase and i cannot always ask client to make my new webserver ip's white list. So i would like to make my infra this way, my webservers will post data to the client server routing from a single server. Like assume that web-1 is main server and the remaining 4 web servers will post data to client server routing through main web-1. I was told that this can be achieved by doing IP Tunneling. But i have no idea how to do that. Would be great for any kind of help.

    Read the article

  • Email Problem - Windows Server 2008 R2

    - by Armen Khachatryan
    Hello, Windows Server 2008 , Server Manager- File Services-Share and Storage Management-File Server Resource Manager Right click - Configure options- Email Notifications tab I have already configured what I need but when I write for example smpt.google.com in the log it writes UNABLE TO CONNECT TO THE REMOTE SERVER I have been through this article http://support.microsoft.com/kb/947057 Please help me.. maybe this is a firewall problem?

    Read the article

  • Migrate data from SQL Compact to SQL Server 2008

    - by Martin
    I need to do a one-time migration of data from SQL Server Compact Edition to SQL Server 2008 Express Edition. I'm looking for a tool to do this kind of migration. I've tried using Import and Export Data in SQL Server, but it doesn't let me import from SQL Server Compact Edition. Anyone knows of a easy way to do it?

    Read the article

  • Auto-start the SQL Server Agent after a computer restart

    - by Dreas Grech
    I am using the SQL Server Agent to run some jobs every day, but the problem is that whenever the server (the machine itself) is restarted, the SQL Server Agent doesn't automatically start when the computer boots back up again...and I have to start it manually myself. How can I set the Server Agent to Auto-Start after a computer restart? Is there a particular Windows Service I need to set as auto-start ?

    Read the article

  • Upgrade MS Sql Report Server 08 for Dundas charts

    - by hadi
    Hi, We have ms sql server 2008, however the new dundas charts are not available on the report server. How do I upgrade the report server so it gets the new dundas charts as well. Dundas charts are a part of Microsoft charts now in the new version of the report server. Your help would be greatly appreciated

    Read the article

  • Antivirus for Windows Server 2008 R2

    - by raja
    I am trying to get a Antivirus server for my Virtual Private Server that has Windows Server 2008 R2 x64 1.5 GB RAM and 40 GB HD. I see people have suggested for NOD32 or Kaspersky but they are not offering Internet security for one server in business edition (it starts with at least 5 PC) and they says I can't install home edition on my VPS as this is for business purpose. Is there any good antivirus/internet security program that I can buy for my single VPS? Any suggestion will help me. Thanks

    Read the article

  • server health monitor

    - by arash
    hello i need to a server monitoring solution. the solution must be able to alert when a server goes down also i want, the solution be flexible to work with various servers for example it must be able to monitor servers like, webserver,application server, DB server and ... i want to know is any open source solution is available for me? thanks in advance

    Read the article

  • HTTP/1.1 503 Service Unavailable Exchange 2003 OWA

    - by toups
    Receiving HTTP/1.1 503 Service Unavailable when trying to access exchange web access. Server 2003 & Exchange 2003 Have tried: Deleting virtual directories and rebuilding them in IIS Restarting Dismounting & mounting the public folder store & mailbox store It's not AppPoolQueueLength Restarting all services (all proper ones are running) Making it use ssl or not (regular http) -- same thing for both Installing IIS & exchange 2003 on a new 2003 box as a new FE server, OWA on that gets same error. Not sure why it's getting a 503... was working without an issue and randomly is stuck at this no matter what; ll users can still successfully connect and use via outlook, only the web access is having issues. Any suggestions would be appreciated.

    Read the article

< Previous Page | 149 150 151 152 153 154 155 156 157 158 159 160  | Next Page >