Search Results

Search found 6258 results on 251 pages for 'power coder'.

Page 154/251 | < Previous Page | 150 151 152 153 154 155 156 157 158 159 160 161  | Next Page >

• PC will be turned off in safe mode

  - by abbasi

  I wanted to scan a Dell inspiron N5010 laptop in safe mode. When I took it to the safe mode environment and ran the AV to scan, after some while the PC went out! The power options menu options (when plug is in) are as follows: Screensaver after 4 mins. Dim to display after 10 mins. Turn off display after 15 mins. Hard disk, sleep and hibernate are all off (set to never). I tested the machine without scanning it, i.e, went to the safe mode and waited to see what occurs after time elapsing. By observations so far (because I can apply more tests to determine that where the problem exactly is), the problem is when the machine is in safe mode and is doing something (in current case, scanning). What do you think? Why it goes out in this situation please? Thanks in advance.

  Read the article

• USB to IDE/SATA adapter

  - by unknown (google)

  I have an old IDE HDD that I am trying to pull files off of. I am using a USD to IDE/SATA adapter. I plug in the power and adapter plugs into the drive and it fires up. I plug the USB plug into my XP laptop and it installs the drivers. I can see USB Mass Storage Device under Device Manager. My problem is I can't see the drive in either Windows Explorer or under Disk Management under Computer Management. Not sure what I am doing wrong. Do I have to slave the old hdd? Do I have to make BIOS changes?

  Read the article

• Video issues with old server running Boxee

  - by Skaughty

  I have a old Dell Power Edge 1650 1U rackmount server running Windows XP. Dual 1.3 ghz Processors and 1 GB of RAM. I would like to run Boxee on it, but the 8mb integrated video card will not support it. The font within Boxee just comes up as blocks of color. I have a PCI Radion R9000 dual out video card. However when I plug it in I can not get video signal on any of the VGA outs. Is it possible to upgrade the video card on this old of a server, or is it possible to make it work with the older integrated video?

  Read the article

• Computer Components

  - by Martin

  What is the role of a motherboard in terms of how components communicate with the processor (via the system busses). Therefore, for each component, which communication bus is involved and what is the route that data takes from the component to the processor, including; The bus name Whether bus is serial or parallel The name of any bridges involved Also, what is the the role of a bridge The components are: Internal components: Floppy Drive, Hard Drive, CD/DVD Drive, Memory, Processor Power supply, Graphics card & Sound card External devices: Monitor, Keyboard, Mouse (PS2 & USB), Printer, Pen Drive I have absolutely no idea of what the routes are and how motherboards communicate, could someone give me a start here? Thanks.

  Read the article

• IBM BladeServer Chassis compatibility

  - by Matt

  Hi, I'm looking at buying a 3 year old blade server. My question is, if I buy it and want to insert a current model blade, will it fit? Also, if the chassis goes "POP" and I need to replace it, will the current model chassis fit 3 year old blades? What about Power supply replacements? The chassis I'm looking at is this: IBM FRU / PN: M8677-3XM with DVD reader The blades are all IBM HS20's. We've had a good run with IBM hardware and although there is some nice ex-lease HP hardware available, my understanding is that backwards comparability is not so well maintained. Is this true?

  Read the article

• Can USB Hubs affect peripheral performance?

  - by Daniel Rasmussen

  Like many laptops, mine has 2 USB 2.0 ports. I'm looking to purchase a USB hub for my peripheral devices. I'm also planning on purchasing a laptop cooler with two USB powered fans, which connects to a USB port but can extend the plug, so it doesn't use one up. (Sorry for the poor description; see the link for a picture.) My questions are these: Can one plug 'too many' peripherals into a USB port? Can I plug my fans into a port, then the hub into the fans, then my keyboard and mouse, mic, and webcam into the extender..? Is it possible to draw too much power from a port? Secondly, will a USB hub affect the performance of any of my devices? I'm mostly worried about my mouse and keyboard. I like wired mice because I've noticed some lag in my Bluetooth mouse.

  Read the article

• Belkin router issue

  - by walr1

  Hi, My cousin and I bought a wireless Belkin router for testing purposes. Please keep in mind for all of our tests there is no ethernet cable plugged in, just the router's power cord. We have been trying to "flood" it with PING requests on its default address 192.168.2.1, but it isn't doing a thing; not even logging any attempts of too many requests. I've disabled the firewall, disabled PING request block, etc. Any idea why this thing isn't being affected? We sent 4 million packets and it hasn't done a thing. Quite odd! Thanks.

  Read the article

• rundll32.exe constantly running taking up resources slowing down my Win 7 computer

  - by Joe Fletcher

  Over the past week, my Windows 7 Home Premium computer (8gb RAM, 64bit) has been running slowly. When I look at my processes, there are always 2 rundll32.exe's running taking up 3 & 25% CPU power, memory slowly creeping upwards from around 115mb to 160mb each in the time it has taken me to right this message, sometimes popping upt o 300mb and back down. Svchost.exe is at 260mb. When I end those processes, everything returns to snappiness. I recently did some Windows Updates, and I think it was around the time my computer started acting slowly, but I can't remember if it was before or after the updates that things started running slowly. Last night I ccleaned & defrag'ed. How can I diagnose what's causing the slowness?

  Read the article

• Good, secure video chat program

  - by wag2639

  I'm looking for something similar to skype but basically just for me to video chat with my girlfriend. Skype has been kind of buggy lately with its recent iterations and doesn't seem to be progressing as much as when it was with its previous backers. Are there any good, secure video chat programs? Something that customizable and lets you choose framerate vs pixelation and is generally secure (I don't care if the NSA can tap it but no one else, especially over unencrypted wifi's). Open source is preferred but not required. Free or really really cheap is practically required. Also, since this is point to point, an i am a power user (and my gf as well), it can involve some manual setup to establish a point-to-point link. Any suggestions, Thanks.

  Read the article

• Sudden restart when Ubuntu almost loaded from disc.

  - by Wesley

  Hi all, Here are the specs beforehand: ECS K7SEM motherboard AMD Duron 900MHz 2x 256MB PC133 SDRAM The Best Power MT-500P 500W PSU Integrated graphics No hard drive DVD-ROM - will update with brand & model Now, I was starting up this machine after it was left outside for 3 months in winter weather. (I got this from a friend.) I was able to get it started and tried to load Ubuntu from the DVD-ROM. It was fairly successful and got up to the point when the Ubuntu logo is glowing. However, when Ubuntu was about to go to the main screen, the computer crashed and automatically rebooted. Is there any reason why this is happening? Also, I should mention that when I try to hit Delete on the BIOS screen to go to Setup, it only shows a screen with four lines saying something Novell something... I will edit with exact lines. Should I be resetting the BIOS or something? Thanks in advance.

  Read the article

• Zero-channel RAID for High Performance MySQL Server (IBM ServeRAID 8k) : Any Experience/Recommendation?

  - by prs563

  We are getting this IBM rack mount server and it has this IBM ServeRAID8k storage controller with Zero-Channel RAID and 256MB battery backed cache. It can support RAID 10 which we need for our high performance MySQL server which will have 4 x 15000K RPM 300GB SAS HDD. This is mission-critical and we want as much bandwidth and performance. Is this a good card or should we replace with another IBM RAID card? IBM ServeRAID 8k SAS Controller option provides 256 MB of battery backed 533 MHz DDR2 standard power memory in a fixed mounting arrangement. The device attaches directly to IBM planar which can provide full RAID capability. Manufacturer IBM Manufacturer Part # 25R8064 Cost Central Item # 10025907 Product Description IBM ServeRAID 8k SAS - Storage controller (zero-channel RAID) - RAID 0, 1, 5, 6, 10, 1E Device Type Storage controller (zero-channel RAID) - plug-in module Buffer Size 256 MB Supported Devices Disk array (RAID) Max Storage Devices Qty 8 RAID Level RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, RAID 1E Manufacturer Warranty 1 year warranty

  Read the article

• are there ever deals on macbooks

  - by John

  I am fed up with hot running dell laptops. I think I am at the point where I want a fast and mobile machine that does not get hot and has decent battery power. I was provided IBM thinkpad from work ...on which I put ubuntu and i was satisfied with it for a year. Now I am quitting my current work and time has come for met to reveal to them that I put ubuntu on it. All in all I will be without a laptop in a week and am thinking about getting a mac book pro. I have never bought an apple product before, so curious...are there ever any deals on macbooks? Or whatever the price is ...that is it.

  Read the article

• Linux WD30EZRX WD Green HDD & Blacx Duet 5G Usb

  - by Adam

  I have connected up an WD30EZRX WD Green HDD to a Thermaltake Blacx Duet 5G USB dock in Ubuntu 12.04. Every thing seems fine except when the HDD idles it seems to have error ls: reading directory .: Input/output error after a while and is only fixed by unmounting and remounting the drive as root. I have the following line in /etc/fstab UUID=AAF670E9F670B6E3 /media/3TB ntfs defaults,user,auto 0 0 I have noticed that it seems to go between /dev/sdc2 and /dev/sdd2 devices on remount. I did copy 1TB last night without issue in 1 sitting. But after x mins of idle it has remount issue. Any tips/suggestions on how to proceed would be appreciated. Spent most of the night googling and all its done is made me sad. Edit (tried as suggested): root@mediaserver:/media/3TB# sudo hdparm -B 255 -S 253 /dev/sdd2 /dev/sdd2: setting Advanced Power Management level to disabled HDIO_DRIVE_CMD failed: Input/output error setting standby to 253 (vendor-specific) APM_level = not supported Seems as if that didn't help with this particular drive.

  Read the article

• What's the best way to clean up after a fork bomb?

  - by raldi

  $ ls bash: no more processes Uh oh. Looks like someone made a fork bomb. Where I used to work, this pretty much meant that the shared server would need to be power-cycled, since even the sysadmins with root often couldn't get the problem cleaned up. Often, they couldn't even get a prompt. I've heard a few tricks (notably, to send STOP signals rather than KILL signals, since the latter would allow the remaining threads to immediately replace the killed ones), but I've never seen a comprehensive guide entitled So, You Have Yourself a Fork Bomb? Let's make one.

  Read the article

• Computer not displaying anything

  - by Justen

  The computer in question worked last week. It's brand new, never been connected to the internet, up-to-date parts, etc. Last week, I installed some 3D software on it, then shut it down and waited for the license files that arrived this week. I've done this to 4 other PCs with the same hardware and software. I've tried: Hooking it up to 3 different monitors using different video cables 2 other graphics cards and a handful of other things like switching which port it's plugged into before and after a restart. I have the driver disc, and a windows reinstallation disc, but they won't do me any good because no display at all for any interval of time. All the fans are moving: psu, gfx, cpu etc, so I don't believe it's a power issue. Here are the specs I know of: 4GB RAM 8800 GTX 700w PSU Intel dual core (not sure of model) Anyways, I'm open to ideas.

  Read the article

• S.M.A.R.T - Predictive Failure Count

  - by Bastien974

  I'm monitoring my IBM ServeRAID M5015 controller for RAID status with MegaCLI, I have this on one of the disk : Enclosure Device ID: 252 Slot Number: 6 Enclosure position: 0 Device Id: 14 Sequence Number: 2 Media Error Count: 32 Other Error Count: 0 Predictive Failure Count: 18 Last Predictive Failure Event Seq Number: 8119 PD Type: SAS Raw Size: 279.396 GB [0x22ecb25c Sectors] Non Coerced Size: 278.896 GB [0x22dcb25c Sectors] Coerced Size: 278.464 GB [0x22cee000 Sectors] Firmware state: Online, Spun Up SAS Address(0): 0x5000c50042c319c9 SAS Address(1): 0x0 Connected Port Number: 5(path0) Inquiry Data: IBM-ESXSST9300653SS B6336XN04HC10525B633 IBM FRU/CRU: 81Y9671 FDE Capable: Not Capable FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: None Device Speed: 6.0Gb/s Link Speed: 6.0Gb/s Media Type: Hard Disk Device Drive: Not Certified Drive Temperature :33 Celsius What does this mean exactly ? I can't find an exact description, is there a way to have more details ? The RAID array has the Optimal state. Media Error Count: 32 Predictive Failure Count: 18 Is there a way through the CLI to power-on the front LED so I physically know which disk I need to replace ?

  Read the article

• Radeon hd 6570 black screen

  - by Sho

  I got some problem with new graphic card. Every time I use AMD Catalyst drivers on Windows or Linux, screen repeatedly goes black. This usually shows u when i open new cards in a browser, resize a window or run a program. Card runs smoothly on basic drivers but this means low resolution. 1940x1080 is native for my monitor so it causes a lot of problems. I've got a 600W Deus G1, so the power is not the problem. Maybe its a silly question, but would going form a vga cable to hdmi help to improve this situation? If not, can it be caused by slow processor or old mainboard? Im getting kinda confused about this whole thing...

  Read the article

• How can I dual install Ubuntu 10.4 in a Mac Mini with 10.4.11?

  - by Marco Mariani

  I'd like to power-up my aging Mac Mini (1.5GHz Core Solo, 1GB RAM, Tiger 10.4.11) by installing a shiny Ubuntu alongside the current OS. After all, I use Ubuntu for everything save for cleaning my teeth. Since it's my first and only Mac and I have next to no experience with the OS (having used it basically as a media player) I am a little concerned about rEFIt, ELILO, Boot Camp and the fact that it's basically a 4.5 years old unsupported machine and I might get asleep reinstalling everything several times. I've used the live desktop-i386 CD and everything works. I tried with an external USB drive instead of a CD but couldn't make it boot. As for installing Ubuntu, the howtos I've found give several alternatives depending on the model, the OSX version, etc.. but they usually talk about newer machines. Which howto should I follow to repartition, and boot thereafter? Thanks

  Read the article

• is a mini PCIe SSD worth it?

  - by Narcolapser

  Question: Is getting a mini-PCIe worth investing in? Info: I have a an Acer Aspire 1 n270. It has this mini PCIe slot that is just sitting there empty. I would like to change this, and I would like to speed up my boot time. So I've been considering getting a mini-PCIe SSD. They are about the same price as faster same size drives of the 2.5" variation. The advantage of the mini-PCIe card is that I can have my HDD still. So I have good boot time, but still have the storage of my HDD. What I want to know is: will this allow me to spin down the HDD more often allowing me to save power? Will the OS (Ubuntu 10.04 LTS) see them as separate drives? Is there anything that the mini-PCIe slot could be better used for? Thanks. ~n

  Read the article

• My HP-Vista based laptop has become very slow recently

  - by goldenmean

  My HP laptop which has Vista Home premium. When I try to start Firefox, internet explorer, it becomes very slow. No other app. When i checked the Performance in Task Manager. It shows the Physical memory , Free as 0 bytes, almost always. This has been recently. Earlier it didn't used to be zero. Laptop has 2GB of RAM. I have nothing running in my tray except - Sound control, Laptop power plan indicator,Network status indicator. There are no other processes whose memory usage adds up to so high to make Free memory as 0. Then what could be hogging the memory and make the laptop very slow. Any pointers would help as it is crawling at the moment.

  Read the article

• MySQL mistake with grant option

  - by John Tate

  I am unsure reading the MySQL documentation if creating a user with the GRANT option will give them the power to create users and grant privileges, or change the privileges of other users databases. I have been creating databases for users like this CREATE DATABASE user; USE user; GRANT ALL PRIVILEGES ON *.* TO 'user'@'localhost' IDENTIFIED BY 'password' WITH GRANT OPTION; Is this the best way of doing it or have I just given my users too much control? They are people I am hosting sites for. Thankfully at this point they are trustworthy. I use quotas. Edit: I have realized I have been granting users access to all databases. This is obviously stupid I should be using this: GRANT ALL PRIVILEGES ON database.* to 'user'@localhost' IDENTIFIED BY 'password' What is the simplest way to revoke privileges for every user except root so I can quickly end this catastrophic rookie mistake?

  Read the article

• Dell U271 monitor DisplayPort suddenly not working

  - by Amir Latif

  My new(ish) Dell U271 took a bit of a knock and it now suddenly doesn't recognise the Macbook plugged into it via DisplayPort - this had been working great for several months up until now. When I "Scan Sources", it doesn't find anything on DisplayPort. However, one suspicious behaviour leads me to think all might not be lost. When the Mac is woken from sleep, this used to kick the monitor in (as an monitor would) and while it no longer does that, the light on the monitor does go from standby orange to blue briefly, then the monitor says it's going into "power save" mode. It seems like it gets some kinda signal. Any ideas on how I can diagnose the problem? I'm trying to find another mac but no one near me has one ...

  Read the article

• Battery backed write cache behavior upon disk change

  - by Halfgaar

  We use 3ware Inc 9650SE SATA-II RAID PCIe RAID controllers with battery backed write cache. Our spare hardware has the same controller. I was wondering; are these controllers smart enough not to sync the cache when the disks have been changed? For example, if I deploy one of those spare machines by putting in the disks of another machine and that spare machine still has pending writes, will it be smart enough not to perform those writes on the replaced array? Edit: my scenario is not really made clear, so let me give an example: server1 goes down because of power supply failure. I put the disks in server2 and start. I repair server1 I put the disks back from server2 in server1 (it's not relevant right now that in reality I would probably keep server2 running). If server1 doesn't have safeguards, it will write to the array, thinking it's simply powering up again, corrupting it.

  Read the article

• Can a Double-Density Floppy drive be swapped out for a High-Density drive?

  - by Ben

  I'm trying to fix the floppy drive in my Roland MC-500. The floppy drive inside is a Matsushita DDF3-1 which doesn't seem to be in production anymore. The DDF3-2 is still available, however it is an HD drive. Does anyone know off the top of their heads if there is any issue with simply swapping the two drives? Could the power usage be different on the drives? Since the machine is expecting a 720k DD drive, are there any jumper settings to have the HD drive function as a DD drive?

  Read the article

• Click sound from computer when shut down

  - by user32569

  Hi, I build my new computer yesterday and I noticed, when computer is shut down, I mean the exact time its looses power from PSU, relativelly loud CLICK sound occurs. Please does anyone knows from where? I think MB, SSD, VGA, CPU nor coolers are not cousing this. I would guess maybe Samsung 1TB HDD (maybe when heads go back to LZ) or some hard safety switch or relay in PSU? Or just the MB speaker? (Yes, its actually installed). Do you have any experience with this? Thanks.

  Read the article

< Previous Page | 150 151 152 153 154 155 156 157 158 159 160 161  | Next Page >