Search Results

Search found 42468 results on 1699 pages for 'default program'.

Page 1540/1699 | < Previous Page | 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547  | Next Page >

• 11.10 desktop alerts (volume change and terminal bell) stopped working but all other audio still works

  - by FlabbergastedPickle

  All, My sound works just fine in 11.10 64-bit install on HP dm1-4050 Sandy Bridge notebook (e.g. audio works in Banshee, flash, games, browser, Thunderbird email notification, etc.), but the core desktop notifications (e.g. pressing a tab in a terminal where there is more than one option should trigger a terminal bell, or changing volume using volume keys should be accompanied with the supporting "quack" that the volume app makes) do not work. I've intentionally disabled login sound as explained here on ask ubuntu but even enabling it back makes no difference. These notifications did work before just fine and I am not sure when did the actually stop working but it must've been fairly recently. Only things I did were trying to install some ppa edge xorg drivers for my intel card (a separate issue) but also reverted them all with ppa-purge once I discovered they did not improve anything. Other thing I did was check volume settings with alsamixer and did alsactl store for the soundcard after I did some experimenting with volume settings for PCM (on my laptop PCM at 100% crackles so I had to lower it and make pulseaudio ignore its setting as per ask ubuntu's page). That said, neither of these should have any bearing on the said notifications since the volume is up and they clearly work everywhere else but the core desktop events. The system ready drum sound when Ubuntu boots and user reaches the login screen also does not work. The guest login behaves exactly same as mine. Audio works (including the login sound since I've not disabled it for the guest account), but no quacks when changing the volume or terminal bell sounds... I've tried copying ubuntu sounds to /usr/share/sounds/ as suggested on ask ubuntu and that did not work. I also tried using dconf-editor to check sound theme settings and tried both freedesktop (which is what it was set to) and ubuntu, as suggested on ask ubuntu. This did not work either. I tried purging the ~/.pulse folder and the /tmp/*pulse* entries, rebooting and restarting pulseaudio with -D flag. While audio came back on and behaved just fine in all aspects (e.g. one can adjust volume levels, play music, games, in-browser sound stuff, and other app alerts) except for the system ready drum sound (at the login screen), and any system event (terminal bell and volume change quack sound). It is interesting that the quack sound works inside system settings-sound when adjusting levels there, but it does not when volume is changed via top bar's volume settings... I do recall that at one point yesterday when I was restarting pulseaudio the quacks that accompany volume change did start working but I have no idea what caused that. This was also when I first realized those alerts were not working. After rebooting it was again gone. I did compile my own 3.0.14-rt31 kernel a little while ago as instructed on one of the wiki's for the 11.10 rt kernel. Everything works as before except for the said sound alerts. I am not sure if this began happening since I started using the rt kernel though and yesterday's momentary ability to hear those quacks while changing the volume make me believe that the kernel is not one responsible for this problem. One more thing I can think of is that I used alsoft-conf tool to configure buffering on the OpenAL (due to TA Spring's choppy audio) and changed in there default audio device to ALSA. I also tried reverting it to Pulseaudio as the only allowed output but the bottom part of the Backend tab always reverts to ALSA even when I select Pulseaudio. The pulseaudio does remain as the only active choice on top. This, however, once again does not make any sense in terms of preventing desktop audio alerts when everything else including OpenAL games plays sound just fine... So, there you have it, as verbose as I could make it :-). I tried all I could find on this issue and had no luck so far... Any ideas?

  Read the article

• Dynamically load and call delegates based on source data

  - by makerofthings7

  Assume I have a stream of records that need to have some computation. Records will have a combination of these functions run Sum, Aggregate, Sum over the last 90 seconds, or ignore. A data record looks like this: Date;Data;ID Question Assuming that ID is an int of some kind, and that int corresponds to a matrix of some delegates to run, how should I use C# to dynamically build that launch map? I'm sure this idea exists... it is used in Windows Forms which has many delegates/events, most of which will never actually be invoked in a real application. The sample below includes a few delegates I want to run (sum, count, and print) but I don't know how to make the quantity of delegates fire based on the source data. (say print the evens, and sum the odds in this sample) using System; using System.Threading; using System.Collections.Generic; internal static class TestThreadpool { delegate int TestDelegate(int parameter); private static void Main() { try { // this approach works is void is returned. //ThreadPool.QueueUserWorkItem(new WaitCallback(PrintOut), "Hello"); int c = 0; int w = 0; ThreadPool.GetMaxThreads(out w, out c); bool rrr =ThreadPool.SetMinThreads(w, c); Console.WriteLine(rrr); // perhaps the above needs time to set up6 Thread.Sleep(1000); DateTime ttt = DateTime.UtcNow; TestDelegate d = new TestDelegate(PrintOut); List<IAsyncResult> arDict = new List<IAsyncResult>(); int count = 1000000; for (int i = 0; i < count; i++) { IAsyncResult ar = d.BeginInvoke(i, new AsyncCallback(Callback), d); arDict.Add(ar); } for (int i = 0; i < count; i++) { int result = d.EndInvoke(arDict[i]); } // Give the callback time to execute - otherwise the app // may terminate before it is called //Thread.Sleep(1000); var res = DateTime.UtcNow - ttt; Console.WriteLine("Main program done----- Total time --> " + res.TotalMilliseconds); } catch (Exception e) { Console.WriteLine(e); } Console.ReadKey(true); } static int PrintOut(int parameter) { // Console.WriteLine(Thread.CurrentThread.ManagedThreadId + " Delegate PRINTOUT waited and printed this:"+parameter); var tmp = parameter * parameter; return tmp; } static int Sum(int parameter) { Thread.Sleep(5000); // Pretend to do some math... maybe save a summary to disk on a separate thread return parameter; } static int Count(int parameter) { Thread.Sleep(5000); // Pretend to do some math... maybe save a summary to disk on a separate thread return parameter; } static void Callback(IAsyncResult ar) { TestDelegate d = (TestDelegate)ar.AsyncState; //Console.WriteLine("Callback is delayed and returned") ;//d.EndInvoke(ar)); } }

  Read the article

• Handling Configuration Changes in Windows Azure Applications

  - by Your DisplayName here!

  While finalizing StarterSTS 1.5, I had a closer look at lifetime and configuration management in Windows Azure. (this is no new information – just some bits and pieces compiled at one single place – plus a bit of reality check) When dealing with lifetime management (and especially configuration changes), there are two mechanisms in Windows Azure – a RoleEntryPoint derived class and a couple of events on the RoleEnvironment class. You can find good documentation about RoleEntryPoint here. The RoleEnvironment class features two events that deal with configuration changes – Changing and Changed. Whenever a configuration change gets pushed out by the fabric controller (either changes in the settings section or the instance count of a role) the Changing event gets fired. The event handler receives an instance of the RoleEnvironmentChangingEventArgs type. This contains a collection of type RoleEnvironmentChange. This in turn is a base class for two other classes that detail the two types of possible configuration changes I mentioned above: RoleEnvironmentConfigurationSettingsChange (configuration settings) and RoleEnvironmentTopologyChange (instance count). The two respective classes contain information about which configuration setting and which role has been changed. Furthermore the Changing event can trigger a role recycle (aka reboot) by setting EventArgs.Cancel to true. So your typical job in the Changing event handler is to figure if your application can handle these configuration changes at runtime, or if you rather want a clean restart. Prior to the SDK 1.3 VS Templates – the following code was generated to reboot if any configuration settings have changed: private void RoleEnvironmentChanging(object sender, RoleEnvironmentChangingEventArgs e) {     // If a configuration setting is changing     if (e.Changes.Any(change => change is RoleEnvironmentConfigurationSettingChange))     {         // Set e.Cancel to true to restart this role instance         e.Cancel = true;     } } This is a little drastic as a default since most applications will work just fine with changed configuration – maybe that’s the reason this code has gone away in the 1.3 SDK templates (more). The Changed event gets fired after the configuration changes have been applied. Again the changes will get passed in just like in the Changing event. But from this point on RoleEnvironment.GetConfigurationSettingValue() will return the new values. You can still decide to recycle if some change was so drastic that you need a restart. You can use RoleEnvironment.RequestRecycle() for that (more). As a rule of thumb: When you always use GetConfigurationSettingValue to read from configuration (and there is no bigger state involved) – you typically don’t need to recycle. In the case of StarterSTS, I had to abstract away the physical configuration system and read the actual configuration (either from web.config or the Azure service configuration) at startup. I then cache the configuration settings in memory. This means I indeed need to take action when configuration changes – so in my case I simply clear the cache, and the new config values get read on the next access to my internal configuration object. No downtime – nice! Gotcha A very natural place to hook up the RoleEnvironment lifetime events is the RoleEntryPoint derived class. But with the move to the full IIS model in 1.3 – the RoleEntryPoint methods get executed in a different AppDomain (even in a different process) – see here.. You might no be able to call into your application code to e.g. clear a cache. Keep that in mind! In this case you need to handle these events from e.g. global.asax.

  Read the article

• Why are you doing this? [closed]

  - by NIcholas Lawson

  I am working on a story that I am going to be querying to several magazines in my hometown about this work that is being done by the AXR group. This is a group of people who have networked online and are working on developing a higher level syntax structure than CSS and HTML currently offer. I am covering this is as a story because I see potential in this as a human interest story in cosmopolitan society. I have been asked by the group to pose this question to you and would appreciate any and all comments you would have on the following ... To AXR: So when does the internet become finished? At what point does a computer scientist say to himself ... my job here is finished ... the internet is complete? When is the internet ready to be more about the display of content than the uploading of new websites or computer tech? You are embarking on upon a sixty year project every day you work with this internet, what drives you? Why are you spending your hard earned hours working on the code to this computer? I spend thirty hours a week online because I love the writing and I know what would make the internet better ... ease of use ... i know it is difficult to program but I see some very elegant solutions online ... in this early inception phase of your programming development for this HSS prototype ... I would like to know why I do not see you programmers asking questions such as ... What would make the end user's life the easiest when using this code? I know you can solve the problem but an evolution forward would be simple, not simple to a computer scientist but simple to use for a career janitor ... if you could solve the problem of alleviating the stress at using a the computer you could get better content out of the computer ... right now the main problem is that the best content is in the hands of the people least likely to use the computer and the more simple you make the computer to use ... the better the content collection will be in the long run ... That is not what I want to talk about though ... why are you writing code when you could be writing stories? I know the computer is worthless without content so I build content, I know the book is worthless without the combinations of words in them, i know the television is worthless without the television news anchor or the actor, what I want to know from you folks in a very journalistic sense is why are you even bothering to bother to write code for a machine that has only made our lives i would dare say less interesting. why are you feeding the beast your time when you could be writing stories or being an actor or musician or auto mechanic ... why code? why this machine? what do you love about it? what do you hate about it? what do you wonder about it? I want to know so that starting out I know how to further shape my questions with axr ... i want the full story ... i want the real answers ... and i want to know why you are doing this, it would make for great writing if you could elucidate on this point.

  Read the article

• Migrating a WebLogic Domain from a 32 to a 64 bit JVM/Architecture

  - by adejuanc

  Currently on 32 bit OS which presents a physical constraint when trying to allocate memory. By limit, a 32 bit OS, will not be able to allocate more than 3 GB on a Linux environment, or 2 GB for Windows environment (not considering Physical Address Extension (PAE) implementation, which can increase the maximum allocatable memory). When this limit is reached, a migration to a 64 bit architecture is recommended. Below are the steps on how to install a 64 WebLogic Server version, along with a 64 Bit JVM and then how to migrate the domain to this new environment. Weblogic Server Version: WebLogic Server Version: 10.3.4.0 OS: Linux adejuan-cl.cl.oracle.com 2.6.18-194.el5 #1 SMP Mon Jan 01 22:10:29 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux JVM:java version "1.6.0_22" Java(TM) SE Runtime Environment (build 1.6.0_22-b04) Oracle JRockit(R) (build R28.1.1-13-139783-1.6.0_22-20101206-0136-linux-x86_64, compiled mode) To create migration template: 1. Execute $<WLS_HOME>/wlserver_10.3/common/bin/config_builder.sh 2. Create Domain Template. 3. Select Domain to migrate. 4. Enter the name of template and other info. Click next. 5. Using Add Button, Select libraries you want to add under lib folder. copy jdbc data sources you would like to have under config/jdbc folder. If you want to have log4j configuration, copy log4j.xml under domain_root folder. 6. Select data base for the domain and click next. 7. Enter Admin Server Name and port numbers. Click next. 8. Enter username and password. Click next. Select No if you don want to add users/groups/roles 9. Click next until reach button create. This will create a jar file that is needed for the next action plan. To install and migrate domain to 64 bit architecture. 1. Install JVM Jrockit R28.1.1.13 on environment. (uncompress zip folder on a known location) 2. Go to JRockit_Home/bin and execute $ java -d64 -jar wls1034_generic.jar 3. When prompt, select JRockit JVM in browse menu, and wait for installation to finish. 4. Go to <WLS_HOME>/wlserver_10.3/common/bin and execute $ ./config.sh 5. Select Create a new Weblogic domain 6. Select Base this domain on an existing template and select browse. 7. Select jar file created on previous action plan. 8. Select Name of domain. Maintain in most cases. 9. Select user name and password. Maintain in most cases. 10. Select Jrockit SDK 1.6.0_22 and click next. 11. Confirm all JMS/JDBC/security configuration. 12. On select Optional Configuration, reconfigure if necessary. 13. Check on Configuration summary for all domain configuration. 14. Click on create, to finish up domain import. Note: Always when installing a 64 bit WLS, it's necessary to install first the 64 JVM and then run the generic installer with the -d64 bit option. If this is not performed, the installation will be the 32 default version. For more information, please refer: http://download.oracle.com/docs/cd/E13188_01/jrockit/docs50/dev_faq.html#pae

  Read the article

• How to retrieve Sharepoint data from a Windows Forms Application.

  - by Michael M. Bangoy

  In this demo I'm going to demonstrate how to retrieve Sharepoint data and display it on a Windows Forms Application. 1. Open Visual Studio 2010 and create a new Project. 2. In the project template select Windows Forms Application. 3. In order to communicate with Sharepoint from a Windows Forms Application we need to add the 2 Sharepoint Client DLL located in c:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\ISAPI. 4. Select the Microsoft.Sharepoint.Client.dll and Microsoft.Sharepoint.Client.Runtime.dll. That's it we're ready to write our codes. Note: In this example I've added to controls on the form, the controls are Button, TextBox, Label and DataGridView. using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Data.Objects; using System.Drawing; using System.Linq; using System.Text; using System.Security; using System.Windows.Forms; using SP = Microsoft.SharePoint.Client; namespace ClientObjectModel { public partial class Form1 : Form { // declare string url of the Sharepoint site string _context = "theurlofyoursharepointsite"; public Form1() { InitializeComponent(); } private void Form1_Load(object sender, EventArgs e) { } private void getsitetitle() {    SP.ClientContext context = new SP.ClientContext(_context);    SP.Web _site = context.Web;    context.Load(_site);    context.ExecuteQuery();    txttitle.Text = _site.Title;    context.Dispose(); } private void loadlist() { using (SP.ClientContext _clientcontext = new SP.ClientContext(_context)) {    SP.Web _web = _clientcontext.Web;    SP.ListCollection _lists = _clientcontext.Web.Lists;    _clientcontext.Load(_lists);    _clientcontext.ExecuteQuery();    DataTable dt = new DataTable();    DataColumn column;    DataRow row;    column = new DataColumn();    column.DataType = Type.GetType("System.String");    column.ColumnName = "List Title";    dt.Columns.Add(column);    foreach (SP.List listitem in _lists)    {       row = dt.NewRow();       row["List Title"] = listitem.Title;       dt.Rows.Add(row);    }       dataGridView1.DataSource = dt;    } private void cmdload_Click(object sender, EventArgs e) { getsitetitle(); loadlist(); } } That's it. Running the application and clicking the Load Button will retrieve the Title of the Sharepoint site and display it on the TextBox and also it will retrieve ALL of the Sharepoint List on that site and populate the DataGridView with the List Title. Hope this helps. Thank you.

  Read the article

• PowerShell Script To Find Where SharePoint 2010 Features Are Activated

  - by Brian Jackett

  The script on this post will find where features are activated within your SharePoint 2010 farm.   Problem    Over the past few months I’ve gotten literally dozens of emails, blog comments, or personal requests from people asking “how do I find where a SharePoint feature has been activated?”  I wrote a script to find which features are installed on your farm almost 3 years ago.  There is also the Get-SPFeature PowerShell commandlet in SharePoint 2010.  The problem is that these only tell you if a feature is installed not where they have been activated.  This is especially important to know if you have multiple web applications, site collections, and /or sites.   Solution    The default call (no parameters) for Get-SPFeature will return all features in the farm.  Many of the parameter sets accept filters for specific scopes such as web application, site collection, and site.  If those are supplied then only the enabled / activated features are returned for that filtered scope.  Taking the concept of recursively traversing a SharePoint farm and merging that with calls to Get-SPFeature at all levels of the farm you can find out what features are activated at that level.  Store the results into a variable and you end up with all features that are activated at every level.    Below is the script I came up with (slight edits for posting on blog).  With no parameters the function lists all features activated at all scopes.  If you provide an Identity parameter you will find where a specific feature is activated.  Note that the display name for a feature you see in the SharePoint UI rarely matches the “internal” display name.  I would recommend using the feature id instead.  You can download a full copy of the script by clicking on the link below.    Note: This script is not optimized for medium to large farms.  In my testing it took 1-3 minutes to recurse through my demo environment.  This script is provided as-is with no warranty.  Run this in a smaller dev / test environment first.   001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 016 017 018 019 020 021 022 023 024 025 026 027 028 029 030 031 032 033 034 035 036 037 038 039 040 041 042 043 044 045 046 047 048 049 050 051 052 053 054 055 056 057 058 059 060 061 062 063 064 065 066 067 068 function Get-SPFeatureActivated { # see full script for help info, removed for formatting [CmdletBinding()] param(   [Parameter(position = 1, valueFromPipeline=$true)]   [Microsoft.SharePoint.PowerShell.SPFeatureDefinitionPipeBind]   $Identity )#end param   Begin   {     # declare empty array to hold results. Will add custom member `     # for Url to show where activated at on objects returned from Get-SPFeature.     $results = @()         $params = @{}   }   Process   {     if([string]::IsNullOrEmpty($Identity) -eq $false)     {       $params = @{Identity = $Identity             ErrorAction = "SilentlyContinue"       }     }       # check farm features     $results += (Get-SPFeature -Farm -Limit All @params |              % {Add-Member -InputObject $_ -MemberType noteproperty `                 -Name Url -Value ([string]::Empty) -PassThru} |              Select-Object -Property Scope, DisplayName, Id, Url)     # check web application features     foreach($webApp in (Get-SPWebApplication))     {       $results += (Get-SPFeature -WebApplication $webApp -Limit All @params |                % {Add-Member -InputObject $_ -MemberType noteproperty `                   -Name Url -Value $webApp.Url -PassThru} |                Select-Object -Property Scope, DisplayName, Id, Url)       # check site collection features in current web app       foreach($site in ($webApp.Sites))       {         $results += (Get-SPFeature -Site $site -Limit All @params |                  % {Add-Member -InputObject $_ -MemberType noteproperty `                     -Name Url -Value $site.Url -PassThru} |                  Select-Object -Property Scope, DisplayName, Id, Url)                          $site.Dispose()         # check site features in current site collection         foreach($web in ($site.AllWebs))         {           $results += (Get-SPFeature -Web $web -Limit All @params |                    % {Add-Member -InputObject $_ -MemberType noteproperty `                       -Name Url -Value $web.Url -PassThru} |                    Select-Object -Property Scope, DisplayName, Id, Url)           $web.Dispose()         }       }     }   }   End   {     $results   } } #end Get-SPFeatureActivated   Snippet of output from Get-SPFeatureActivated   Conclusion    This script has been requested for a long time and I’m glad to finally getting a working “clean” version.  If you find any bugs or issues with the script please let me know.  I’ll be posting this to the TechNet Script Center after some internal review.  Enjoy the script and I hope it helps with your admin / developer needs.         -Frog Out

  Read the article

• Oracle ties social, CRM, analytics products to customer experience

  - by Richard Lefebvre

  Oracle will embark on a new product strategy that centers on customer experience management, an approach driven by the company’s many recent acquisitions.  The new approach, announced by the company Monday night, will be seen in an expansive suite that features familiar Oracle products -- such as its Fusion CRM platform -- and offerings the company recently gained through acquisitions, including FatWire, RightNow and Vitrue. Billed as Oracle Customer Experience (CX), the suite enables businesses to respond to a market centered on the customer experience, said Anthony Lye, the company’s senior vice president of CRM. Companies “are very aware their products are commoditizing,” Lye said in an interview last week, referring to how the Web and social media channels have empowered customers. Customer experiences start and mature outside of CRM, and applications today need to reflect that shift, Lye said. Businesses thus need to step away from a pure CRM model, he said. Oracle claims CX will improve customer experience management by connecting businesses with customers across Web sites and social channels. Companies can create a single, real-time view of the customer and use predictive analytics of interactions to strengthen the customer experience, Oracle said. “Companies have to connect with their customers wherever, whenever and however they want,” Lye said. “They have to know and understand their customer.” Lye promoted Oracle CX as a suite that will work across channels to complement the company’s applications. A new strategy has been “cooking” for years now, but the acquisitions Oracle has made over the past two years made the time right for a “unique collaboration,” Lye said. CX includes basic Oracle CRM solutions such as Siebel and the new Fusion Apps. It also includes the company’s MDM products, Enterprise Data Quality, Customer Hub and Product Hub. And the suite is rounded out by the services that Oracle recently bought, transactions that created or enhanced the company’s presence in social, marketing, e-commerce and customer service. For instance, FatWire provides tools for marketing. ATG focuses on e-commerce. And RightNow specializes in customer service. Two recent acquisitions -- Collective Intellect and Vitrue -- gave Oracle a seat at the social table. Collective Intellect is a social intelligence program, and Vitrue is a social marketing and engagement platform. Those acquisitions have yet to be finalized. Oracle hopes to eventually integrate the two social offerings, as well as most of the other services, into the CX suite. CX can integrate on Oracle’s standard middleware, and can give users a lower TCO by leveraging it as a single stack on premise or as a cloud solution. Lye deferred questions about the pricing of CX, and instead pitched Oracle’s ability to offer multiple customer experience solutions in one suite. Businesses have struggled with the complexity of infrastructure and modern services that communicate with customers, Lye said. “They’ve struggled to pull all these things together. We’ve done that,” he said. Stephen Powers, a research director at Forrester Research Inc. in Cambridge, Mass., said it’s not surprising for Oracle to offer the CX suite and a related customer experience strategy.  “They’ve got CRM, ATG, FatWire. Clearly, it’s been the strategy for them,” he said. But the challenge for Oracle, and for any other vendor that has gone on an “acquisition spree,” is to connect its many products, Powers said. “The portfolio has to be more than the parts. They’ve got to realize the efficiencies and value of having these pieces to tie them together,” he said. “The proof is in the pudding. Adobe has done a nice job in its space with the products they’ve got. Now, Oracle has got to show it has something.” Albert McKeon (SearchCRM) Published: 25 Jun 2012 : http://searchcrm.techtarget.com/news/2240158644/Oracle-ties-social-CRM-analytics-products-to-customer-experience

  Read the article

• Musings on the launch of SQL Monitor

  - by Phil Factor

  For several years, I was responsible for the smooth running of a large number of enterprise database servers. We ran a network monitoring tool that was primitive by today’s standards but which performed the useful function of polling every system, including all the Servers in my charge. It ran a configurable script for each service that you needed to monitor that was merely required to return one of a number of integer values. These integer values represented the pain level of the service, from 10 (“hurtin’ real bad”) to 1 (“Things is great”). Not only could you program the visual appearance of each server on the network diagram according to the value of the integer, but you could even opt to run a sound file. Very soon, we had a large TFT Screen, high on the wall of the server room, with every server represented by an icon, and a speaker next to it that would give out a series of grunts, groans, snores, shrieks and funeral marches, depending on the problem. One glance at the display, and you could dive in with iSQL/QA/SSMS and check what was going on with your favourite diagnostic tools. If you saw a server icon burst into flames on the screen or droop like a jelly, you dropped your mug of coffee to do it.  It was real fun, but I remember it more for the huge difference it made to have that real-time visibility into how your servers are performing. The management soon stopped making jokes about the real reason we wanted the TFT screen. (It rendered DVDs beautifully they said; particularly flesh-tints). If you are instantly alerted when things start to go wrong, then there was a good chance you could fix it before being alerted to the problem by the users of the system.  There is a world of difference between this sort of tool, one that gives whoever is ‘on watch’ in the server room the first warning of a potential problem on one of any number of servers, and the breed of tool that attempts to provide some sort of prosthetic DBA Brain. I like to get the early warning, to get the right information to help to diagnose a problem: No auto-fix, but just the information. I prefer to leave the task of ascertaining the exact cause of a problem to my own routines, custom code, intuition and forensic instincts. A simulated aircraft cockpit doesn’t do anything for me, especially before I know where I should be flying.  Time has moved on, and that TFT screen is now, with SQL Monitor, an iPad or any other mobile or static device that can support a browser. Rather than trying to reproduce the conceptual topology of the servers, it lists them in their groups so as to give a display that scales with the increasing number of databases you monitor.  It gives the history of the major events and trends for the servers. It gives the icons and colours that you can spot out of the corner of your eye, but goes on to give you just enough information in drill-down to give you a much clearer idea of where to look with your DBA tools and routines. It doesn't swamp you with information.  Whereas a few server and database-level problems are pretty easily fixed, others depend on judgement and experience to sort out.  Although the idea of an application that automates the bulk of a DBA’s skills is attractive to many, I can’t see it happening soon. SQL Server’s complexity increases faster than the panaceas can be created. In the meantime, I believe that the best way of helping  DBAs  is to make the monitoring process as simple and effective as possible,  and provide the right sort of detail and ‘evidence’ to allow them to decide on the fix. In the end, it is still down to the skill of the DBA.

  Read the article

• Unable to Sign in to the Microsoft Online Services Signin application from Windows 7 client located behind ISA firewall

  - by Ravindra Pamidi

  A while ago i helped a customer troubleshoot authentication problem with Microsoft Online Services Signin application.  This customer was evaluating Microsoft BPOS (Business Productivity Online Services) and was having trouble using the single sign on application behind ISA 2004 firewall.The network structure is fairly simple with single Windows 2003 Active Directory domain and Windows 7 clients. On a successful logon to the Microsoft Online Services Signin application, this application provides single signon functionality to all of Microsoft online services in the BPOS package. Symptoms:When trying to signin it fails with error "The service is currently unavailable. Please try again later. If problems continue, contact your service administrator". If ISA 2004 firewall is removed from the picture the authentication succeeds.Troubleshooting: Enabled ISA Server firewall logging along with Microsoft Network Monitor tool on the Windows 7 Client while reproducing the issue. Analysis of the ISA Server Firewall logs and Microsoft Network capture revealed that the Microsoft Online Services Sign In application when sending request to ISA Server does not send the domain credentials and as a result ISA Server responds with an error code of HTTP 407 Proxy authentication required listing out the supported authentication mechanisms.  The application in question is expected to send the credentials of the domain user in response to this request. However in this case, it fails to send the logged on user's domain credentials. Bit of researching on the Internet revealed that The "Microsoft Online Services Sign In" application by default does not support Outbound Internet Proxy authentication. In order for it to send the logged on user's domain credentials we had to make  changes to its configuration file "SignIn.exe.config" located under "Program Files\Microsoft Online Services\Sign In" folder. Step by Step details to configure the configuration file are documented on Microsoft TechNet website given below.  Configure your outbound authenticating proxy serverhttp://www.microsoft.com/online/help/en-us/helphowto/cc54100d-d149-45a9-8e96-f248ecb1b596.htm After the above problem was addressed we were still not able to use the "Microsoft Online Services Sign In" application and it failed with the same error.  Analysis of another network capture revealed that the application in question is now sending the required credentials and the connection seems to terminate at a later stage. Enabled verbose logging for the "Microsoft Online Services Sign In" application and then reproduced the problem. Analysis of the logs revealed a time difference between the local client and Microsoft Online services server of around seven minutes which is above the acceptable time skew of five minutes. Excerpt from Microsoft Online Services Sign In application verbose log:  1/26/2012 1:57:51 PM Verbose SingleSignOn.GetSSOGenericInterface SSO Interface URL: https://signinservice.apac.microsoftonline.com/ssoservice/UID1/26/2012 1:57:52 PM Exception SSOSignIn.SignIn The security timestamp is invalid because its creation time ('2012-01-26T08:34:52.767Z') is in the future. Current time is '2012-01-26T08:27:52.987Z' and allowed clock skew is '00:05:00'.1/26/2012 1:57:52 PM Exception SSOSignIn.SignIn  Although the Windows 7 Clients successfully synchronized time to the domain controller for the domain, the domain controller was not configured to synchronize time with external NTP servers. This caused a gradual drift in time on the network thus resulting in the above issue. Reconfigured the domain controller holding the PDC FSMO role to synchronize time with external time source ( time.nist.gov ) and edited the system policy on the ISA server firewall to allow NTP traffic to time.nist.gov Configure the time source for the forest:Windows Time Servicehttp://technet.microsoft.com/en-us/library/cc794937(WS.10).aspx Forced synchronization of Windows time using the command w32tm /resync on the domain controller and later on the clients each of which had corrected the seven minutes difference. This resolved the problem with logon to Microsoft Online Services Sign In.

  Read the article

• Generate texture for a heightmap

  - by James

  I've recently been trying to blend multiple textures based on the height at different points in a heightmap. However i've been getting poor results. I decided to backtrack and just attempt to recreate one single texture from an SDL_Surface (i'm using SDL) and just send that into opengl. I'll put my code for creating the texture and reading the colour values. It is a 24bit TGA i'm loading, and i've confirmed that the rest of my code works because i was able to send the surfaces pixels directly to my createTextureFromData function and it drew fine. struct RGBColour { RGBColour() : r(0), g(0), b(0) {} RGBColour(unsigned char red, unsigned char green, unsigned char blue) : r(red), g(green), b(blue) {} unsigned char r; unsigned char g; unsigned char b; }; // main loading code SDLSurfaceReader* reader = new SDLSurfaceReader(m_renderer); reader->readSurface("images/grass.tga"); // new texture unsigned char* newTexture = new unsigned char[reader->m_surface->w * reader->m_surface->h * 3 * reader->m_surface->w]; for (int y = 0; y < reader->m_surface->h; y++) { for (int x = 0; x < reader->m_surface->w; x += 3) { int index = (y * reader->m_surface->w) + x; RGBColour colour = reader->getColourAt(x, y); newTexture[index] = colour.r; newTexture[index + 1] = colour.g; newTexture[index + 2] = colour.b; } } unsigned int id = m_renderer->createTextureFromData(newTexture, reader->m_surface->w, reader->m_surface->h, RGB); // functions for reading pixels RGBColour SDLSurfaceReader::getColourAt(int x, int y) { Uint32 pixel; Uint8 red, green, blue; RGBColour rgb; pixel = getPixel(m_surface, x, y); SDL_LockSurface(m_surface); SDL_GetRGB(pixel, m_surface->format, &red, &green, &blue); SDL_UnlockSurface(m_surface); rgb.r = red; rgb.b = blue; rgb.g = green; return rgb; } // this function taken from SDL documentation // http://www.libsdl.org/cgi/docwiki.cgi/Introduction_to_SDL_Video#getpixel Uint32 SDLSurfaceReader::getPixel(SDL_Surface* surface, int x, int y) { int bpp = m_surface->format->BytesPerPixel; Uint8 *p = (Uint8*)m_surface->pixels + y * m_surface->pitch + x * bpp; switch (bpp) { case 1: return *p; case 2: return *(Uint16*)p; case 3: if (SDL_BYTEORDER == SDL_BIG_ENDIAN) return p[0] << 16 | p[1] << 8 | p[2]; else return p[0] | p[1] << 8 | p[2] << 16; case 4: return *(Uint32*)p; default: return 0; } } I've been stumped at this, and I need help badly! Thanks so much for any advice.

  Read the article

• Error X3650 when compiling shader in XNA

  - by Saikai

  I'm attempting to convert the XBDEV.NET Mosaic Shader for use in my XNA project and having trouble. The compiler errors out because of the half globals. At first I tried replacing the globals and just writing the variables explicitly in the code, but that garbles the Output. Next I tried replacing all the half with float vars, but that still garbles the resulting Image. I call the effect file from SpriteBatch.Begin(). Is there a way to convert this shader to the new pixel shader conventions? Are there any good tutorials for this topic? Here is the shader file for reference: /*****************************************************************************/ /* File: tiles.fx Details: Modified version of the NVIDIA Composer FX Demo Program 2004 Produces a tiled mosaic effect on the output. Requires: Vertex Shader 1.1 Pixel Shader 2.0 Modified by: [email protected] (www.xbdev.net) */ /*****************************************************************************/ float4 ClearColor : DIFFUSE = { 0.0f, 0.0f, 0.0f, 1.0f}; float ClearDepth = 1.0f; /******************************** TWEAKABLES *********************************/ half NumTiles = 40.0; half Threshhold = 0.15; half3 EdgeColor = {0.7f, 0.7f, 0.7f}; /*****************************************************************************/ texture SceneMap : RENDERCOLORTARGET < float2 ViewportRatio = { 1.0f, 1.0f }; int MIPLEVELS = 1; string format = "X8R8G8B8"; string UIWidget = "None"; >; sampler SceneSampler = sampler_state { texture = <SceneMap>; AddressU = CLAMP; AddressV = CLAMP; MIPFILTER = NONE; MINFILTER = LINEAR; MAGFILTER = LINEAR; }; /***************************** DATA STRUCTS **********************************/ struct vertexInput { half3 Position : POSITION; half3 TexCoord : TEXCOORD0; }; /* data passed from vertex shader to pixel shader */ struct vertexOutput { half4 HPosition : POSITION; half2 UV : TEXCOORD0; }; /******************************* Vertex shader *******************************/ vertexOutput VS_Quad( vertexInput IN) { vertexOutput OUT = (vertexOutput)0; OUT.HPosition = half4(IN.Position, 1); OUT.UV = IN.TexCoord.xy; return OUT; } /********************************** pixel shader *****************************/ half4 tilesPS(vertexOutput IN) : COLOR { half size = 1.0/NumTiles; half2 Pbase = IN.UV - fmod(IN.UV,size.xx); half2 PCenter = Pbase + (size/2.0).xx; half2 st = (IN.UV - Pbase)/size; half4 c1 = (half4)0; half4 c2 = (half4)0; half4 invOff = half4((1-EdgeColor),1); if (st.x > st.y) { c1 = invOff; } half threshholdB = 1.0 - Threshhold; if (st.x > threshholdB) { c2 = c1; } if (st.y > threshholdB) { c2 = c1; } half4 cBottom = c2; c1 = (half4)0; c2 = (half4)0; if (st.x > st.y) { c1 = invOff; } if (st.x < Threshhold) { c2 = c1; } if (st.y < Threshhold) { c2 = c1; } half4 cTop = c2; half4 tileColor = tex2D(SceneSampler,PCenter); half4 result = tileColor + cTop - cBottom; return result; } /*****************************************************************************/ technique tiles { pass p0 { VertexShader = compile vs_1_1 VS_Quad(); ZEnable = false; ZWriteEnable = false; CullMode = None; PixelShader = compile ps_2_0 tilesPS(); } }

  Read the article

• WiFi stops working after a while in Lenovo ThinkPad W520 (Ubuntu 12.04)

  - by el10780

  After several minutes(I do not know how many) there is no internet connection on my laptop via Wi-Fi.Ubuntu doesn't show any kind of message that my WiFi was disconnected neither there is a signal drop,but suddenly Firefox stops connecting to web pages.I checked my modem/router and it seems that it is working fine.I tried also to reboot the WiFi device and nothing happens.The only thing that it makes it work again is a reboot of the system and if I do not want to do a reboot then I am enforced to connect to the Internet using Ethernet cable.Does anybody know what is happening? ## Some Hardware info that might be helpful ## el10780@ThinkPad-W520:~$ sudo lshw -class network *-network description: Ethernet interface product: 82579LM Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 04 serial: f0:de:f1:f1:be:10 size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=1.5.1-k duplex=full firmware=0.13-3 ip=192.168.0.10 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:50 memory:f3a00000-f3a1ffff memory:f3a2b000-f3a2bfff ioport:6080(size=32) *-network description: Wireless interface product: Centrino Advanced-N + WiMAX 6250 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 5e serial: 64:80:99:63:14:74 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-26-generic firmware=41.28.5.1 build 33926 ip=192.168.0.6 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn resources: irq:52 memory:f3900000-f3901fff *-network description: Ethernet interface physical id: 1 bus info: usb@2:1.3 logical name: wmx0 serial: 00:1d:e1:53:b2:e8 capabilities: ethernet physical configuration: driver=i2400m firmware=i6050-fw-usb-1.5.sbcf link=no el10780@ThinkPad-W520:~$ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:16.3 Serial controller: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4) 00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b4) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [Quadro 1000M] (rev a1) 03:00.0 Network controller: Intel Corporation Centrino Advanced-N + WiMAX 6250 (rev 5e) 0d:00.0 System peripheral: Ricoh Co Ltd Device e823 (rev 08) 0d:00.3 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 PCIe IEEE 1394 Controller (rev 04) 0e:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) el10780@ThinkPad-W520:~$ rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no 3: i2400m-usb:2-1.3:1.0: WiMAX Soft blocked: yes Hard blocked: no The weirdest thing is this screenshot which I took after running the **Additional Drivers** program.I mean I have a NVidia Quadro 1000M and my Intel Centrino WiFi Card and this shows that there are not proprietay drivers for my system. http://imageshack.us/photo/my-images/268/screenshotfrom201207062.png/

  Read the article

• X server with nvidia driver crashing: 12.04

  - by Raster

  My X server consistently crashes. It seems like this is happening when the X server is idle. This behaviour is new with 12.04. This is only happening on the second display of a multiseat system. Is there a configuration change I can make to stop this? X.Org X Server 1.11.3 Release Date: 2011-12-16 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.42-26-generic x86_64 Ubuntu Current Operating System: Linux Desktop 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-29-generic root=/dev/mapper/Group1-Root ro ramdisk_size=512000 quiet splash vt.handoff=7 Build Date: 04 August 2012 01:51:23AM xorg-server 2:1.11.4-0ubuntu10.7 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.24.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.1.log", Time: Sun Sep 2 22:37:06 2012 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" Backtrace: 0: /usr/bin/X (xorg_backtrace+0x26) [0x7fcee86be846] 1: /usr/bin/X (0x7fcee8536000+0x18c6ea) [0x7fcee86c26ea] 2: /lib/x86_64-linux-gnu/libpthread.so.0 (0x7fcee785c000+0xfcb0) [0x7fcee786bcb0] 3: /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so (0x7fcee14ba000+0x902a9) [0x7fcee154a2a9] 4: /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so (0x7fcee14ba000+0xfd5e7) [0x7fcee15b75e7] 5: /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so (0x7fcee14ba000+0x4d6b92) [0x7fcee1990b92] 6: /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so (0x7fcee14ba000+0x4d74d5) [0x7fcee19914d5] 7: /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so (0x7fcee14ba000+0x4d767d) [0x7fcee199167d] 8: /usr/bin/X (0x7fcee8536000+0x1196ec) [0x7fcee864f6ec] 9: /usr/bin/X (0x7fcee8536000+0xe8ad5) [0x7fcee861ead5] 10: /usr/bin/X (0x7fcee8536000+0xe9d45) [0x7fcee861fd45] /etc/X11/xorg.conf Section "ServerLayout" Identifier "Desktop" Screen 0 "DesktopScreen" 0 0 InputDevice "DesktopMouse" "CorePointer" InputDevice "DesktopKeyboard" "CoreKeyboard" Option "AutoAddDevices" "false" Option "AllowEmptyInput" "true" Option "AutoEnableDevices" "false" EndSection Section "ServerLayout" Identifier "Desktop2" Screen 1 "Desktop2Screen" 0 0 InputDevice "Desktop2Mouse" "CorePointer" InputDevice "Desktop2Keyboard" "CoreKeyboard" Option "AutoAddDevices" "false" Option "AllowEmptyInput" "true" Option "AutoEnableDevices" "false" EndSection Section "Module" Load "dbe" Load "extmod" Load "type1" Load "freetype" Load "glx" EndSection Section "Files" EndSection Section "ServerFlags" Option "AutoAddDevices" "false" Option "AutoEnableDevices" "false" Option "AllowMouseOpenFail" "on" Option "AllowEmptyInput" "on" Option "ZapWarning" "on" Option "HandleSepcialKeys" "off" # Zapping on Option "DRI2" "on" Option "Xinerama" "0" EndSection # Desktop Mouse Section "InputDevice" Identifier "DesktopMouse" Driver "evdev" Option "Device" "/dev/input/event3" Option "Protocol" "auto" Option "GrabDevice" "on" Option "Emulate3Buttons" "no" Option "Buttons" "5" Option "ZAxisMapping" "4 5" Option "SendCoreEvents" "true" EndSection # Desktop2 Mouse Section "InputDevice" Identifier "Desktop2Mouse" Driver "evdev" Option "Device" "/dev/input/event5" Option "Protocol" "auto" Option "GrabDevice" "on" Option "Emulate3Buttons" "no" Option "Buttons" "5" Option "ZAxisMapping" "4 5" Option "SendCoreEvents" "true" EndSection Section "InputDevice" Identifier "DesktopKeyboard" Driver "evdev" Option "Device" "/dev/input/event4" Option "XkbRules" "xorg" Option "XkbModel" "105" Option "XkbLayout" "us" Option "Protocol" "Standard" Option "GrabDevice" "on" EndSection Section "InputDevice" Identifier "Desktop2Keyboard" Driver "evdev" Option "Device" "/dev/input/event6" Option "XkbRules" "xorg" Option "XkbModel" "105" Option "XkbLayout" "us" Option "Protocol" "Standard" Option "GrabDevice" "on" EndSection Section "Monitor" Identifier "Desktop2Monitor" VendorName "Acer" ModelName "Acer G235H" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" Identifier "DesktopMonitor" VendorName "Acer" ModelName "Acer H213H" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "EVGACard" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 560 Ti" Option "Coolbits" "1" BusID "PCI:2:0:0" Screen 0 EndSection Section "Device" Identifier "XFXCard" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 9800" Option "Coolbits" "1" BusID "PCI:5:0:0" Screen 0 EndSection Section "Screen" Identifier "DesktopScreen" Device "EVGACard" Monitor "DesktopMonitor" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Desktop2Screen" Device "XFXCard" Monitor "Desktop2Monitor" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Incorrect lighting results with deferred rendering

  - by Lasse

  I am trying to render a light-pass to a texture which I will later apply on the scene. But I seem to calculate the light position wrong. I am working on view-space. In the image above, I am outputting the attenuation of a point light which is currently covering the whole screen. The light is at 0,10,0 position, and I transform it to view-space first: Vector4 pos; Vector4 tmp = new Vector4 (light.Position, 1); // Transform light position for shader Vector4.Transform (ref tmp, ref Camera.ViewMatrix, out pos); shader.SendUniform ("LightViewPosition", ref pos); Now to me that does not look as it should. What I think it should look like is that the white area should be on the center of the scene. The camera is at the corner of the scene, and it seems as if the light would move along with the camera. Here's the fragment shader code: void main(){ // default black color vec3 color = vec3(0); // Pixel coordinates on screen without depth vec2 PixelCoordinates = gl_FragCoord.xy / ScreenSize; // Get pixel position using depth from texture vec4 depthtexel = texture( DepthTexture, PixelCoordinates ); float depthSample = unpack_depth(depthtexel); // Get pixel coordinates on camera-space by multiplying the // coordinate on screen-space by inverse projection matrix vec4 world = (ImP * RemapMatrix * vec4(PixelCoordinates, depthSample, 1.0)); // Undo the perspective calculations vec3 pixelPosition = (world.xyz / world.w) * 3; // How far the light should reach from it's point of origin float lightReach = LightColor.a / 2; // Vector in between light and pixel vec3 lightDir = (LightViewPosition.xyz - pixelPosition); float lightDistance = length(lightDir); vec3 lightDirN = normalize(lightDir); // Discard pixels too far from light source //if(lightReach < lightDistance) discard; // Get normal from texture vec3 normal = normalize((texture( NormalTexture, PixelCoordinates ).xyz * 2) - 1); // Half vector between the light direction and eye, used for specular component vec3 halfVector = normalize(lightDirN + normalize(-pixelPosition)); // Dot product of normal and light direction float NdotL = dot(normal, lightDirN); float attenuation = pow(lightReach / lightDistance, LightFalloff); // If pixel is lit by the light if(NdotL > 0) { // I have moved stuff from here to above so I can debug them. // Diffuse light color color += LightColor.rgb * NdotL * attenuation; // Specular light color color += LightColor.xyz * pow(max(dot(halfVector, normal), 0.0), 4.0) * attenuation; } RT0 = vec4(color, 1); //RT0 = vec4(pixelPosition, 1); //RT0 = vec4(depthSample, depthSample, depthSample, 1); //RT0 = vec4(NdotL, NdotL, NdotL, 1); RT0 = vec4(attenuation, attenuation, attenuation, 1); //RT0 = vec4(lightReach, lightReach, lightReach, 1); //RT0 = depthtexel; //RT0 = 100 / vec4(lightDistance, lightDistance, lightDistance, 1); //RT0 = vec4(lightDirN, 1); //RT0 = vec4(halfVector, 1); //RT0 = vec4(LightColor.xyz,1); //RT0 = vec4(LightViewPosition.xyz/100, 1); //RT0 = vec4(LightPosition.xyz, 1); //RT0 = vec4(normal,1); } What am I doing wrong here?

  Read the article

• NFJS Central Iowa Software Symposium Des Moines Trip Report

  - by reza_rahman

  As some of you may be aware, I recently joined the well-respected US based No Fluff Just Stuff (NFJS) Tour. If you work in the US and still don't know what the No Fluff Just Stuff (NFJS) Tour is, you are doing yourself a very serious disfavor. NFJS is by far the cheapest and most effective way to stay up to date through some world class speakers and talks. Following the US cultural tradition of old-fashioned roadshows, NFJS is basically a set program of speakers and topics offered at major US cities year round. The NFJS Central Iowa Software Symposium was held August 8 - 10 in Des Moines. The attendance at the event and my sessions was moderate by comparison to some of the other shows. It is one of the few events of it's kind that take place this part the country so it is extremely important. I had five talks total over two days, more or less back-to-back. The first one was my JavaScript + Java EE 7 talk titled "Using JavaScript/HTML5 Rich Clients with Java EE 7". This talk is basically about aligning EE 7 with the emerging JavaScript ecosystem (specifically AngularJS). The slide deck for the talk is here: JavaScript/HTML5 Rich Clients Using Java EE 7 from Reza Rahman The demo application code is posted on GitHub. The code should be a helpful resource if this development model is something that interests you. Do let me know if you need help with it but the instructions should be fairly self-explanatory. I am delivering this material at JavaOne 2014 as a two-hour tutorial. This should give me a little more bandwidth to dig a little deeper, especially on the JavaScript end. The second talk (on the second day) was our flagship Java EE 7/8 talk. Currently the talk is basically about Java EE 7 but I'm slowly evolving the talk to transform it into a Java EE 8 talk as we move forward. The following is the slide deck for the talk: JavaEE.Next(): Java EE 7, 8, and Beyond from Reza Rahman The next talk I delivered was my Cargo Tracker/Java EE + DDD talk. This talk basically overviews DDD and describes how DDD maps to Java EE using code examples/demos from the Cargo Tracker Java EE Blue Prints project. Applied Domain-Driven Design Blue Prints for Java EE from Reza Rahman The third was my talk titled "Using NoSQL with ~JPA, EclipseLink and Java EE". The talk covers an interesting gap that there is surprisingly little material on out there. The talk has three parts -- a birds-eye view of the NoSQL landscape, how to use NoSQL via a JPA centric facade using EclipseLink NoSQL, Hibernate OGM, DataNucleus, Kundera, Easy-Cassandra, etc and how to use NoSQL native APIs in Java EE via CDI. The slides for the talk are here: Using NoSQL with ~JPA, EclipseLink and Java EE from Reza Rahman The JPA based demo is available here, while the CDI based demo is available here. Both demos use MongoDB as the data store. Do let me know if you need help getting the demos up and running. I finishd off the event with a talk titled Building Java HTML5/WebSocket Applications with JSR 356. The talk introduces HTML 5 WebSocket, overviews JSR 356, tours the API and ends with a small WebSocket demo on GlassFish 4. The slide deck for the talk is posted below. Building Java HTML5/WebSocket Applications with JSR 356 from Reza Rahman The demo code is posted on GitHub: https://github.com/m-reza-rahman/hello-websocket. My next NFJS show is the Greater Atlanta Software Symposium on September 12 - 14. Here's my tour schedule so far, I'll keep you up-to-date as the tour goes forward: September 12 - 14, Atlanta. September 19 - 21, Boston. October 17 - 19, Seattle. I hope you'll take this opportunity to get some updates on Java EE as well as the other useful content on the tour?

  Read the article

• The inevitable Hello World post!

  - by brendonpage

  Greetings to anyone reading this! This is my first of hopefully many posts. I would like to use this post to introduce myself and to let you know what to expect from this blog in future. Okay so a bit about myself. In case you missed the name of this blog, my name is Brendon Page! I am a Software Developer from South Africa and work for a small company who’s main focus is producing software for the kitchen cupboard industry, although from time to time we do produce custom solutions for other industries. I work in a small team of 3, including myself, and am fortunate enough to work from home! I have been involved in IT since 1996, which is when I got my first PC, and started working as a junior programmer in 2003. Outside of work I enjoy playing squash, PC Games and of course LANing with my friends. If I get any free time between all of that I will usually dedicate some of it to a personal project, these are mainly prototypes for an idea I have had or for something that could be useful at work. I was in 2 minds on whether to include a photo of myself. The reason for this was because while I was looking for a suitable photo to use, it dawned on me how much time I dedicate to pulling funny faces in photos! I also realized how little I shave, which I blame completely on working form home. So after much debate here I am, funny face, beard and all!   Now that you know a bit about me lets move onto what expect from this blog. I work predominantly with Microsoft technologies so most if not all of my posts will be related to something Microsoft. Since most of my job entails Software Development you can expect a lot of posts which will deal with the .NET Framework. I am currently working on a large Silverlight project, so my first few posts will be targeted at in that direction. I will be striving to make the content of my posts as useful as possible from both an explanation and code perspective, I aim to include a working solution for every post, which I will put up on my skydrive for download. Here is what I have planned for my next few posts: Where did my session variables go?  Here I will take you through the lessons I learnt the hard way about the ASP.NET session. I am not going to go into to much depth in this post, as there is already a lot of information available on it. I mainly want to cover it in an effort to keep the scope creep of my posts to a minimum, some the solutions I upload will use it and I would like to have a post that I can reference to explain why I am doing something a certain way. Uploading files through SIlverlight Again there is a lot of existing information on this topic, so I wont be going into to much depth, but I will be using the solution from this as a base for my next post. Generating and Displaying DeepZoom images dynamically in Silverlight Well the title pretty much speaks for it’s self on this one. As I mentioned I will be building off the solution that I create in my ‘Uploading files through Silverlight’ post. Securing DeepZoom images using a custom implementation of the MultiScaleTileSource In this post I will look at the privacy issue surrounding the default usage of DeepZoom images in Silverlight and how to overcome it. This makes the use of DeepZoom in privacy conscious applications more viable. Thanks to anyone who actually read this post! I look forward to producing more which will hopefully be helpful to you.

  Read the article

• Texture displays on Android emulator but not on device

  - by Rob

  I have written a simple UI which takes an image (256x256) and maps it to a rectangle. This works perfectly on the emulator however on the phone the texture does not show, I see only a white rectangle. This is my code: public void onSurfaceCreated(GL10 gl, EGLConfig config) { byteBuffer = ByteBuffer.allocateDirect(shape.length * 4); byteBuffer.order(ByteOrder.nativeOrder()); vertexBuffer = byteBuffer.asFloatBuffer(); vertexBuffer.put(cardshape); vertexBuffer.position(0); byteBuffer = ByteBuffer.allocateDirect(shape.length * 4); byteBuffer.order(ByteOrder.nativeOrder()); textureBuffer = byteBuffer.asFloatBuffer(); textureBuffer.put(textureshape); textureBuffer.position(0); // Set the background color to black ( rgba ). gl.glClearColor(0.0f, 0.0f, 0.0f, 0.5f); // Enable Smooth Shading, default not really needed. gl.glShadeModel(GL10.GL_SMOOTH); // Depth buffer setup. gl.glClearDepthf(1.0f); // Enables depth testing. gl.glEnable(GL10.GL_DEPTH_TEST); // The type of depth testing to do. gl.glDepthFunc(GL10.GL_LEQUAL); // Really nice perspective calculations. gl.glHint(GL10.GL_PERSPECTIVE_CORRECTION_HINT, GL10.GL_NICEST); gl.glEnable(GL10.GL_TEXTURE_2D); loadGLTexture(gl); } public void onDrawFrame(GL10 gl) { gl.glClear(GL10.GL_COLOR_BUFFER_BIT | GL10.GL_DEPTH_BUFFER_BIT); gl.glDisable(GL10.GL_DEPTH_TEST); gl.glMatrixMode(GL10.GL_PROJECTION); // Select Projection gl.glPushMatrix(); // Push The Matrix gl.glLoadIdentity(); // Reset The Matrix gl.glOrthof(0f, 480f, 0f, 800f, -1f, 1f); gl.glMatrixMode(GL10.GL_MODELVIEW); // Select Modelview Matrix gl.glPushMatrix(); // Push The Matrix gl.glLoadIdentity(); // Reset The Matrix gl.glEnableClientState(GL10.GL_VERTEX_ARRAY); gl.glEnableClientState(GL10.GL_TEXTURE_COORD_ARRAY); gl.glLoadIdentity(); gl.glTranslatef(card.x, card.y, 0.0f); gl.glBindTexture(GL10.GL_TEXTURE_2D, texture[0]); //activates texture to be used now gl.glVertexPointer(2, GL10.GL_FLOAT, 0, vertexBuffer); gl.glTexCoordPointer(2, GL10.GL_FLOAT, 0, textureBuffer); gl.glDrawArrays(GL10.GL_TRIANGLE_STRIP, 0, 4); gl.glDisableClientState(GL10.GL_VERTEX_ARRAY); gl.glDisableClientState(GL10.GL_TEXTURE_COORD_ARRAY); } public void onSurfaceChanged(GL10 gl, int width, int height) { // Sets the current view port to the new size. gl.glViewport(0, 0, width, height); // Select the projection matrix gl.glMatrixMode(GL10.GL_PROJECTION); // Reset the projection matrix gl.glLoadIdentity(); // Calculate the aspect ratio of the window GLU.gluPerspective(gl, 45.0f, (float) width / (float) height, 0.1f, 100.0f); // Select the modelview matrix gl.glMatrixMode(GL10.GL_MODELVIEW); // Reset the modelview matrix gl.glLoadIdentity(); } public int[] texture = new int[1]; public void loadGLTexture(GL10 gl) { // loading texture Bitmap bitmap; bitmap = BitmapFactory.decodeResource(context.getResources(), R.drawable.image); // generate one texture pointer gl.glGenTextures(0, texture, 0); //adds texture id to texture array // ...and bind it to our array gl.glBindTexture(GL10.GL_TEXTURE_2D, texture[0]); //activates texture to be used now // create nearest filtered texture gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MIN_FILTER, GL10.GL_NEAREST); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MAG_FILTER, GL10.GL_LINEAR); // Use Android GLUtils to specify a two-dimensional texture image from our bitmap GLUtils.texImage2D(GL10.GL_TEXTURE_2D, 0, bitmap, 0); // Clean up bitmap.recycle(); } As per many other similar issues and resolutions on the web i have tried setting the minsdkversion is 3, loading the bitmap via an input stream bitmap = BitmapFactory.decodeStream(is), setting BitmapFactory.Options.inScaled to false, putting the images in the nodpi folder and putting them in the raw folder.. all of which didn't help. I'm not really sure what else to try..

  Read the article

• How to make Ubuntu recognize an unknown external display (so I can adjust its resolution)?

  - by WagnerAA

  I have a Dell laptop with an external monitor attached (a Samsumg SyncMaster 931c). My laptop display was recognized, and I can adjust its optimum resolution. My external display is still unknown, thus I'm stuck at a lower resolution (1024x768): I tried the "Detect Displays" button, but it didn't work, nothing happens. I recently upgraded from Ubuntu 12.04 to 12.10. Things were working before. I don't know if I can actually change this configuration, or if this is a bug. I searched for an answer here and also in Launchpad's website, but found none. I even tried to install Nvidia drivers, and just messed things up. It seems I wasn't even using nvidia before, as I guessed by looking at my additional drivers configuration: My laptop has an Intel chipset, I guess: $ dpkg --get-selections | grep -i -e nvidia -e intel intel-gpu-tools install libdrm-intel1:amd64 install libdrm-intel1:i386 install nvidia-common install xserver-xorg-video-intel install I don't have an xorg.conf file (I think this is nvidia related, am I right?): $ cat /etc/X11/xorg.conf cat: /etc/X11/xorg.conf: No such file or directory $ ls -l /etc/X11/ total 76 drwxr-xr-x 2 root root 4096 Out 19 23:41 app-defaults drwxr-xr-x 2 root root 4096 Abr 25 2012 cursors -rw-r--r-- 1 root root 18 Abr 25 2012 default-display-manager drwxr-xr-x 4 root root 4096 Abr 25 2012 fonts -rw-r--r-- 1 root root 17394 Dez 3 2009 rgb.txt lrwxrwxrwx 1 root root 13 Mai 1 03:33 X -> /usr/bin/Xorg drwxr-xr-x 3 root root 4096 Out 19 23:41 xinit drwxr-xr-x 2 root root 4096 Jan 23 2012 xkb -rw-r--r-- 1 root root 0 Out 24 08:55 xorg.conf.nvidia-xconfig-original -rwxr-xr-x 1 root root 709 Abr 1 2010 Xreset drwxr-xr-x 2 root root 4096 Out 19 10:08 Xreset.d drwxr-xr-x 2 root root 4096 Out 19 10:08 Xresources -rwxr-xr-x 1 root root 3730 Jan 20 2012 Xsession drwxr-xr-x 2 root root 4096 Out 20 00:11 Xsession.d -rw-r--r-- 1 root root 265 Jul 1 2008 Xsession.options -rw-r--r-- 1 root root 13 Ago 15 06:43 XvMCConfig -rw-r--r-- 1 root root 601 Abr 25 2012 Xwrapper.config Here is some information I gathered by looking at other related posts: $ sudo lshw -C display; lsb_release -a; uname -a *-display:0 description: VGA compatible controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 07 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:48 memory:f6800000-f6bfffff memory:d0000000-dfffffff ioport:1800(size=8) *-display:1 UNCLAIMED description: Display controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 07 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:f6100000-f61fffff LSB Version: core-2.0-amd64:core-2.0-noarch:core-3.0-amd64:core-3.0-noarch:core-3.1-amd64:core-3.1-noarch:core-3.2-amd64:core-3.2-noarch:core-4.0-amd64:core-4.0-noarch:cxx-3.0-amd64:cxx-3.0-noarch:cxx-3.1-amd64:cxx-3.1-noarch:cxx-3.2-amd64:cxx-3.2-noarch:cxx-4.0-amd64:cxx-4.0-noarch:desktop-3.1-amd64:desktop-3.1-noarch:desktop-3.2-amd64:desktop-3.2-noarch:desktop-4.0-amd64:desktop-4.0-noarch:graphics-2.0-amd64:graphics-2.0-noarch:graphics-3.0-amd64:graphics-3.0-noarch:graphics-3.1-amd64:graphics-3.1-noarch:graphics-3.2-amd64:graphics-3.2-noarch:graphics-4.0-amd64:graphics-4.0-noarch:printing-3.2-amd64:printing-3.2-noarch:printing-4.0-amd64:printing-4.0-noarch:qt4-3.1-amd64:qt4-3.1-noarch Distributor ID: Ubuntu Description: Ubuntu 12.10 Release: 12.10 Codename: quantal Linux Batcave 3.5.0-17-generic #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux $ xrandr -q Screen 0: minimum 320 x 200, current 2304 x 800, maximum 32767 x 32767 LVDS1 connected 1280x800+0+0 (normal left inverted right x axis y axis) 286mm x 1790mm 1280x800 59.9*+ 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 connected 1024x768+1280+32 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0* 800x600 60.3 56.2 848x480 60.0 640x480 59.9 DP1 disconnected (normal left inverted right x axis y axis) If there's anything else I can do, any other information I can post here, to help me configure this external display, please let me know. If this is actually a bug, I apologize (I know bugs are not allowed here), but I really wasn't sure. And I will promptly file a bug report in Launchpad if that's the case. Thanks a lot in advance. ;)

  Read the article

• Solaris 11.1: Encrypted Immutable Zones on (ZFS) Shared Storage

  - by darrenm

  Solaris 11 brought both ZFS encryption and the Immutable Zones feature and I've talked about the combination in the past.  Solaris 11.1 adds a fully supported method of storing zones in their own ZFS using shared storage so lets update things a little and put all three parts together. When using an iSCSI (or other supported shared storage target) for a Zone we can either let the Zones framework setup the ZFS pool or we can do it manually before hand and tell the Zones framework to use the one we made earlier.  To enable encryption we have to take the second path so that we can setup the pool with encryption before we start to install the zones on it. We start by configuring the zone and specifying an rootzpool resource: # zonecfg -z eizoss Use 'create' to begin configuring a new zone. zonecfg:eizoss> create create: Using system default template 'SYSdefault' zonecfg:eizoss> set zonepath=/zones/eizoss zonecfg:eizoss> set file-mac-profile=fixed-configuration zonecfg:eizoss> add rootzpool zonecfg:eizoss:rootzpool> add storage \ iscsi://zs7120-tvp540-c.uk.oracle.com/luname.naa.600144f09acaacd20000508e64a70001 zonecfg:eizoss:rootzpool> end zonecfg:eizoss> verify zonecfg:eizoss> commit zonecfg:eizoss> Now lets create the pool and specify encryption: # suriadm map \ iscsi://zs7120-tvp540-c.uk.oracle.com/luname.naa.600144f09acaacd20000508e64a70001 PROPERTY VALUE mapped-dev /dev/dsk/c10t600144F09ACAACD20000508E64A70001d0 # echo "zfscrypto" > /zones/p # zpool create -O encryption=on -O keysource=passphrase,file:///zones/p eizoss \ /dev/dsk/c10t600144F09ACAACD20000508E64A70001d0 # zpool export eizoss Note that the keysource example above is just for this example, realistically you should probably use an Oracle Key Manager or some other better keystorage, but that isn't the purpose of this example.  Note however that it does need to be one of file:// https:// pkcs11: and not prompt for the key location.  Also note that we exported the newly created pool.  The name we used here doesn't actually mater because it will get set properly on import anyway. So lets go ahead and do our install: zoneadm -z eizoss install -x force-zpool-import Configured zone storage resource(s) from: iscsi://zs7120-tvp540-c.uk.oracle.com/luname.naa.600144f09acaacd20000508e64a70001 Imported zone zpool: eizoss_rpool Progress being logged to /var/log/zones/zoneadm.20121029T115231Z.eizoss.install Image: Preparing at /zones/eizoss/root. AI Manifest: /tmp/manifest.xml.ujaq54 SC Profile: /usr/share/auto_install/sc_profiles/enable_sci.xml Zonename: eizoss Installation: Starting ... Creating IPS image Startup linked: 1/1 done Installing packages from: solaris origin: http://pkg.us.oracle.com/solaris/release/ Please review the licenses for the following packages post-install: consolidation/osnet/osnet-incorporation (automatically accepted, not displayed) Package licenses may be viewed using the command: pkg info --license <pkg_fmri> DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 187/187 33575/33575 227.0/227.0 384k/s PHASE ITEMS Installing new actions 47449/47449 Updating package state database Done Updating image state Done Creating fast lookup database Done Installation: Succeeded Note: Man pages can be obtained by installing pkg:/system/manual done. Done: Installation completed in 929.606 seconds. Next Steps: Boot the zone, then log into the zone console (zlogin -C) to complete the configuration process. Log saved in non-global zone as /zones/eizoss/root/var/log/zones/zoneadm.20121029T115231Z.eizoss.install That was really all we had to do, when the install is done boot it up as normal. The zone administrator has no direct access to the ZFS wrapping keys used for the encrypted pool zone is stored on.  Due to how inheritance works in ZFS he can still create new encrypted datasets that use those wrapping keys (without them ever being inside a process in the zone) or he can create encrypted datasets inside the zone that use keys of his own choosing, the output below shows the two cases: rpool is inheriting the key material from the global zone (note we can see the value of the keysource property but we don't use it inside the zone nor does that path need to be (or is) accessible inside the zone). Whereas rpool/export/home/bob has set keysource locally. # zfs get encryption,keysource rpool rpool/export/home/bob NAME PROPERTY VALUE SOURCE rpool encryption on inherited from $globalzone rpool keysource passphrase,file:///zones/p inherited from $globalzone rpool/export/home/bob encryption on local rpool/export/home/bob keysource passphrase,prompt local  

  Read the article

• Getting FEATURE_LEVEL_9_3 to work in DX11

  - by Dominic

  Currently I'm going through some tutorials and learning DX11 on a DX10 machine (though I just ordered a new DX11 compatible computer) by means of setting the D3D_FEATURE_LEVEL_ setting to 10_0 and switching the vertex and pixel shader versions in D3DX11CompileFromFile to "vs_4_0" and "ps_4_0" respectively. This works fine as I'm not using any DX11-only features yet. I'd like to make it compatible with DX9.0c, which naively I thought I could do by changing the feature level setting to 9_3 or something and taking the vertex/pixel shader versions down to 3 or 2. However, no matter what I change the vertex/pixel shader versions to, it always fails when I try to call D3DX11CompileFromFile to compile the vertex/pixel shader files when I have D3D_FEATURE_LEVEL_9_3 enabled. Maybe this is due to the the vertex/pixel shader files themselves being incompatible for the lower vertex/pixel shader versions, but I'm not expert enough to say. My shader files are listed below: Vertex shader: cbuffer MatrixBuffer { matrix worldMatrix; matrix viewMatrix; matrix projectionMatrix; }; struct VertexInputType { float4 position : POSITION; float2 tex : TEXCOORD0; float3 normal : NORMAL; }; struct PixelInputType { float4 position : SV_POSITION; float2 tex : TEXCOORD0; float3 normal : NORMAL; }; PixelInputType LightVertexShader(VertexInputType input) { PixelInputType output; // Change the position vector to be 4 units for proper matrix calculations. input.position.w = 1.0f; // Calculate the position of the vertex against the world, view, and projection matrices. output.position = mul(input.position, worldMatrix); output.position = mul(output.position, viewMatrix); output.position = mul(output.position, projectionMatrix); // Store the texture coordinates for the pixel shader. output.tex = input.tex; // Calculate the normal vector against the world matrix only. output.normal = mul(input.normal, (float3x3)worldMatrix); // Normalize the normal vector. output.normal = normalize(output.normal); return output; } Pixel Shader: Texture2D shaderTexture; SamplerState SampleType; cbuffer LightBuffer { float4 ambientColor; float4 diffuseColor; float3 lightDirection; float padding; }; struct PixelInputType { float4 position : SV_POSITION; float2 tex : TEXCOORD0; float3 normal : NORMAL; }; float4 LightPixelShader(PixelInputType input) : SV_TARGET { float4 textureColor; float3 lightDir; float lightIntensity; float4 color; // Sample the pixel color from the texture using the sampler at this texture coordinate location. textureColor = shaderTexture.Sample(SampleType, input.tex); // Set the default output color to the ambient light value for all pixels. color = ambientColor; // Invert the light direction for calculations. lightDir = -lightDirection; // Calculate the amount of light on this pixel. lightIntensity = saturate(dot(input.normal, lightDir)); if(lightIntensity > 0.0f) { // Determine the final diffuse color based on the diffuse color and the amount of light intensity. color += (diffuseColor * lightIntensity); } // Saturate the final light color. color = saturate(color); // Multiply the texture pixel and the final diffuse color to get the final pixel color result. color = color * textureColor; return color; }

  Read the article

• Asynchrony in C# 5 (Part I)

  - by javarg

  I’ve been playing around with the new Async CTP preview available for download from Microsoft. It’s amazing how language trends are influencing the evolution of Microsoft’s developing platform. Much effort is being done at language level today than previous versions of .NET. In these post series I’ll review some major features contained in this release: Asynchronous functions TPL Dataflow Task based asynchronous Pattern Part I: Asynchronous Functions This is a mean of expressing asynchronous operations. This kind of functions must return void or Task/Task<> (functions returning void let us implement Fire & Forget asynchronous operations). The two new keywords introduced are async and await. async: marks a function as asynchronous, indicating that some part of its execution may take place some time later (after the method call has returned). Thus, all async functions must include some kind of asynchronous operations. This keyword on its own does not make a function asynchronous thought, its nature depends on its implementation. await: allows us to define operations inside a function that will be awaited for continuation (more on this later). Async function sample: Async/Await Sample async void ShowDateTimeAsync() {     while (true)     {         var client = new ServiceReference1.Service1Client();         var dt = await client.GetDateTimeTaskAsync();         Console.WriteLine("Current DateTime is: {0}", dt);         await TaskEx.Delay(1000);     } } The previous sample is a typical usage scenario for these new features. Suppose we query some external Web Service to get data (in this case the current DateTime) and we do so at regular intervals in order to refresh user’s UI. Note the async and await functions working together. The ShowDateTimeAsync method indicate its asynchronous nature to the caller using the keyword async (that it may complete after returning control to its caller). The await keyword indicates the flow control of the method will continue executing asynchronously after client.GetDateTimeTaskAsync returns. The latter is the most important thing to understand about the behavior of this method and how this actually works. The flow control of the method will be reconstructed after any asynchronous operation completes (specified with the keyword await). This reconstruction of flow control is the real magic behind the scene and it is done by C#/VB compilers. Note how we didn’t use any of the regular existing async patterns and we’ve defined the method very much like a synchronous one. Now, compare the following code snippet  in contrast to the previuous async/await: Traditional UI Async void ComplicatedShowDateTime() {     var client = new ServiceReference1.Service1Client();     client.GetDateTimeCompleted += (s, e) =>     {         Console.WriteLine("Current DateTime is: {0}", e.Result);         client.GetDateTimeAsync();     };     client.GetDateTimeAsync(); } The previous implementation is somehow similar to the first shown, but more complicated. Note how the while loop is implemented as a chained callback to the same method (client.GetDateTimeAsync) inside the event handler (please, do not do this in your own application, this is just an example).  How it works? Using an state workflow (or jump table actually), the compiler expands our code and create the necessary steps to execute it, resuming pending operations after any asynchronous one. The intention of the new Async/Await pattern is to let us think and code as we normally do when designing and algorithm. It also allows us to preserve the logical flow control of the program (without using any tricky coding patterns to accomplish this). The compiler will then create the necessary workflow to execute operations as the happen in time.

  Read the article

• Viewport / Camera Calculation in 2D Game

  - by Dave

  we have a 2D game with some sprites and tiles and some kind of camera/viewport, that "moves" around the scene. so far so good, if we wouldn't had some special behaviour for your camera/viewport translation. normally you could stick the camera to your player figure and center it, resulting in a very cheap, undergraduate, translation equation, like : vec_translation -/+= speed (depending in what keys are pressed. WASD as default.) buuuuuuuuuut, we want our player figure be able to actually reach the bounds, when the viewport/camera has reached a maximum translation. we came up with the following solution (only keys a and d are the shown here, the rest is just adaption of calculation or maybe YOUR super-cool and elegant solution :) ): if(keys[A]) { playerX -= speed; if(playerScreenX <= width / 2 && tx < 0) { playerScreenX = width / 2; tx += speed; } else if(playerScreenX <= width / 2 && (tx) >= 0) { playerScreenX -= speed; tx = 0; if(playerScreenX < 0) playerScreenX = 0; } else if(playerScreenX >= width / 2 && (tx) < 0) { playerScreenX -= speed; } } if(keys[D]) { playerX += speed; if(playerScreenX >= width / 2 && (-tx + width) < sceneWidth) { playerScreenX = width / 2; tx -= speed; } if(playerScreenX >= width / 2 && (-tx + width) >= sceneWidth) { playerScreenX += speed; tx = -(sceneWidth - width); if(playerScreenX >= width - player.width) playerScreenX = width - player.width; } if(playerScreenX <= width / 2 && (-tx + width) < sceneWidth) { playerScreenX += speed; } } i think the code is rather self explaining: keys is a flag container for currently active keys, playerX/-Y is the position of the player according to world origin, tx/ty are the translation components vital to background / npc / item offset calculation, playerOnScreenX/-Y is the actual position of the player figure (sprite) on screen and width/height are the dimensions of the camera/viewport. this all looks quite nice and works well, but there is a very small and nasty calculation error, which in turn sums up to some visible effect. let's consider following piece of code: if(playerScreenX <= width / 2 && tx < 0) { playerScreenX = width / 2; tx += speed; } it can be translated into plain english as : if the x position of your player figure on screen is less or equal the half of your display / camera / viewport size AND there is enough space left LEFT of your viewport/camera then set players x position on screen to width half, increase translation (because we subtract the translation from something we want to move). easy, right?! doing this will create a small delta between playerX and playerScreenX. after so much talking, my question appears now here at the bottom of this document: how do I stick the calculation of my player-on-screen to the actual position of the player AND having a viewport that is not always centered aroung the players figure? here is a small test-case in processing: http://pastebin.com/bFaTauaa thank you for reading until now and thank you in advance for probably answering my question.

  Read the article

• Taking HRMS to the Cloud to Simplify Human Resources Management

  - by HCM-Oracle

  By Anke Mogannam With human capital management (HCM) a top-of-mind issue for executives in every industry, human resources (HR) organizations are poised to have their day in the sun—proving not just their administrative worth but their strategic value as well.  To make good on that promise, however, HR must modernize. Indeed, if HR is to act as an agent of change—providing the swift reallocation of employees  and the rapid absorption of employee data required for enterprises to shift course on a dime—it must first deal with the disruptive change at its own front door. And increasingly, that means choosing the right technology and human resources management system (HRMS) for managing the entire employee lifecycle. Unfortunately, for most organizations, this task has proved easier said than done. This is because while much has been written about advances in HRMS technology, until recently, most of those advances took the form of disparate on-premises solutions designed to serve very specific purposes. Although this may have resulted in key competencies in certain areas, it also meant that processes for core HR functions like payroll and benefits were being carried out in separate systems from those used for talent management, workforce optimization, training, and so on. With no integration—and no single system of record—processes were disconnected, ease of use was impeded, user experience was diminished, and vital data was left untapped.  Today, however, that scenario has begun to change, and end-to-end cloud-based HCM solutions have moved from wished-for innovations to real-life solutions. Why, then, have HR organizations been so slow in adopting them? The answer—it would seem—is, “It’s complicated.” So complicated, in fact, that 45 percent of the respondents to PwC’s “Annual HR Technology Survey” (for 2013) reported having no formal HR software roadmap, and 40 percent stated that they “did not know” whether their organizations would be increasing their use of cloud or software as a service (SaaS) for HR.  Clearly, HR organizations need help sorting through the morass of HR software options confronting them. But just as clearly, there’s an enormous opportunity awaiting those that do. The trick will come in charting a course that allows HR to leverage existing technology while investing in the cloud-based solutions that will deliver the end-to-end processes, easy-to-understand analytics, and superior adaptability required to simplify—and add value to—every aspect of employee management. The Opportunity therefore is to cut costs, drive Innovation, and increase engagement by moving to cloud-based HCM.  Then you will benefit from one Interface, leverage many access points, and  gain at-a-glance insight across your entire workforce. With many legacy on-premises HR systems not being efficient anymore and cloud-based, integrated systems that span the range of HR functions finally reaching maturity, the time is ripe for moving core HR to the cloud. Indeed, for the first time ever there are more HRMS replacement initiatives than HRMS upgrade initiatives under way, and the majority of them involve moving to the cloud per Cedar Crestone’s 2013-2014 HRMS survey. To learn how you can launch your own cloud HCM initiative and begin using HR to power the enterprise, visit Oracle HRMS in the Cloud and Oracle’s new customer 2 cloud program. Anke Mogannam brings more than 16 years of marketing and human capital management experience in the technology industries to her role at Oracle where she is part of the Human Capital Management applications marketing team. In that role, Anke drives content marketing, messaging, go-to-market activities, integrated marketing campaigns, and field enablement. Prior to joining Oracle, Anke held several roles in communications, marketing, HCM product strategy and product management at PeopleSoft, SAP, Workday and Saba. Follow her on Twitter @amogannam

  Read the article

• PASS Summit 2013 Review

  - by Ajarn Mark Caldwell

  As a long-standing member of PASS who lives in the greater Seattle area and has attended about nine of these Summits, let me start out by saying how GREAT it was to go to Charlotte, North Carolina this year.  Many of the new folks that I met at the Summit this year, upon hearing that I was from Seattle, commented that I must have been disappointed to have to travel to the Summit this year after 5 years in a row in Seattle.  Well, nothing could be further from the truth.  I cheered loudly when I first heard that the 2013 Summit would be outside Seattle.  I have many fond memories of trips to Orlando, Florida and Grapevine, Texas for past Summits (missed out on Denver, unfortunately).  And there is a funny dynamic that takes place when the conference is local.  If you do as I have done the last several years and saved my company money by not getting a hotel, but rather just commuting from home, then both family and coworkers tend to act like you’re just on a normal schedule.  For example, I have a young family, and my wife and kids really wanted to still see me come home “after work”, but there are a whole lot of after-hours activities, social events, and great food to be enjoyed at the Summit each year.  Even more so if you really capitalize on the opportunities to meet face-to-face with people you either met at previous summits or have spoken to or heard of, from Twitter, blogs, and forums.  Then there is also the lovely commuting in Seattle traffic from neighboring cities rather than the convenience of just walking across the street from your hotel.  So I’m just saying, there are really nice aspects of having the conference 2500 miles away. Beyond that, the training was fantastic as usual.  The SQL Server community has many outstanding presenters and experts with deep knowledge of the tools who are extremely willing to share all of that with anyone who wants to listen.  The opening video with PASS President Bill Graziano in a NASCAR race turned dream sequence was very well done, and the keynotes, as usual, were great.  This year I was particularly impressed with how well attended were the Professional Development sessions.  Not too many years ago, those were very sparsely attended, but this year, the two that I attended were standing-room only, and these were not tiny rooms.  I would say this is a testament to both the maturity of the attendees realizing how important these topics are to career success, as well as to the ever-increasing skills of the presenters and the program committee for selecting speakers and topics that resonated with people.  If, as is usually the case, you were not able to get to every session that you wanted to because there were just too darn many good ones, I encourage you to get the recordings. Overall, it was a great time as these events always are.  It was wonderful to see old friends and make new ones, and the people of Charlotte did an awesome job hosting the event and letting their hospitality shine (extra kudos to SQLSentry for all they did with the shuttle, maps, and other event sponsorships).  We’re back in Seattle next year (it is a release year, after all) but I would say that with the success of this year’s event, I strongly encourage the Board and PASS HQ to firmly reestablish the location rotation schedule.  I’ll even go so far as to suggest standardizing on an alternating Seattle – Charlotte schedule, or something like that. If you missed the Summit this year, start saving now, and register early, so you can join us!

  Read the article

< Previous Page | 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547  | Next Page >