Search Results

Search found 2510 results on 101 pages for 'hp pavilion'.

Page 16/101 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

  • How can I disable the IR/Remote Control on an HP Laptop?

    - by Steve Rowe
    I've seen this happen on 2 different HP laptops now. If I try to use them in the same room as a Media Center, the MCE TV remote keeps sending commands to the laptop. This can do anything from wake it up and turn it on to just moving the selection around. There is no obvious way to disable the IR sensor or at least its response to the remote. Does anyone know how to do this?

    Read the article

  • Can I use a Smart Array P410 controller on a HP Proliant DL 180 G5 server?

    - by Massimo
    This link says the HP Proliant DL 180 G5 server only supports Smart Array E200, E500, P400 and P800 controllers. Can I use a Smart Array P410 instead? Currently the server has only the default internal controller, I need an additional one for better performance and to support additional drives (the default controller only supports 4, with a Smart Array controller all 8 bays can be used). The disks are SATA ones.

    Read the article

  • Can you disable the light up buttons on the HP HDX series laptops?

    - by Connor W
    Im intrested in buying a laptop from the HP HDX series, but I have one concern. As you can see below, they have touch sensitive buttons above the keyboard which are lit up. I cant help but think how distracting they would be if you were watching a film on it. So does anyone know if its possible to turn these lights off? And to any owners of this laptop, do you find it distracting? Thanks

    Read the article

  • Does Control Zone touchpad in HP notebooks have standard LMB/RMB clicks at the bottom of touchpad?

    - by user1825608
    I wanted to buy: http://www.x-kom.pl/p/203762-ultrabook-15-6-hp-envy-15-x360-u000ew-i5-4210u-4gb-1000-win81.html# but now I see it does not have normal touchpad but this one which does not work as it should in Spectre 13. The deal is that every video says about those new features (which will be outdated when Windows 9 will come by) not about if it still has standard LMB/RMB click. Question: Does or does not Control Zone touchpade have mechanical left and right mouse button area at the bottom of it as every other touchpad?

    Read the article

  • HP Envy dv6t-7300: Disabled WiFi through button and can't enable it anymore

    - by Mateus B. Cassiano
    Well, I have a HP Envy dv6t-7300 laptop that came with a Ralink RT5390 WiFi card. Everything was working perfectly, and eventually I press the WiFi button in my keyboard to toggle the card on/off. Until today, all worked right: if the wifi was off (wifi LED amber) and I press the wifi button, after a few seconds the LED turn white and everything works. If I repeat the process, the wifi LED turn amber and the card get disabled, but now, I can't turn it on anymore. running sudo rfkill list all I get: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes So, I ran sudo rfkill unblock all but nothing changed. As a side note, if I run sudo ifconfig wlan0 up, the indicator LED gets white (indicating that the card was enabled), but Ubuntu still say that the card is blocked by hardware. Extra information: the card works without issues in windows and in Ubuntu installer (booting from a live CD). I'm using the card out-of-box, using the drivers already included in Ubuntu 12.10. The module rt2800pci is loaded and working fine, not blacklisted, etc, etc. The card and the button toggle worked flawlessly until today, when I toggled it off and can't turn it on anymore... The problem is back, but in a different manner: if I don't press the wifi key a few times during the grub loading, in the login screen the wifi button will be ambar (disabled), pressing it will toggle it white (enabled) or ambar (disabled) again, but ubuntu still says that the network card was disabled by hardware and doesn't connect... In other words, if I don't press the WiFi button a few times when Ubuntu is booting, it will be stuck with the "network card was disabled by hardware" message, even if the light is white (enabled). Any clue? Maybe a error in some startup script or config file?

    Read the article

  • Installing Ubuntu on HP Envy 4 - 1104tx (preinstalled Windows 8)

    - by Froyo
    I have been using Linux for more than 2 years now. I had hp pavilion dv4 laptop and Ubuntu 12.04 was working great. I recently purchased HP Envy 4 - 1104tx which has Windows 8 preinstalled. I tried to install Ubuntu 12.04 but since it is not much compatible with UFEI, I downloaded 64 bit iso of ubuntu 12.10. Made a liveUSB using UnetBootin 583. I followed Installing Ubuntu on a Pre-Installed UEFI Supported Windows 8 system but still I am not able to boot with LiveUSB. I disabled secure boot. There is no option for fast boot or anything as such. It still wouldn't work. I also tried booting through Legacy, but I'm unable to install via LiveUSB. Is there any other way? I don't have SSD so no problem of fake raid. Is there some way by which I can install Ubuntu (12.04 preferred)? I don't care about Windows 8. Is there any way via which I can install Ubutnu over Windows 8? (I don't have a CD/DVD ROM).

    Read the article

  • Trying to re-install ubuntu 11.10on an HP Pavillion G6, screen goes black after the ubuntu logo shows.How do I get it to install normally?

    - by Josh Towers
    Installed Ubuntu 11.1 successfully without my wireless device being recognized. Used sudo apt-get update + upgrade commands to attempt to fix this. Computer crashes after upgrade and now it won't finish re-installing Ubuntu, after it shows the first purple screen with the Ubuntu logo, the screen goes black. Used the Derik's Boot Nuke CD and then attempted re-installment again, and the black screen problem remains consistent, seemingly no matter what I do. It sounds like it's installing but won't let me see anything or go anywhere. heelllppp

    Read the article

  • ATI Driver for HP Pavilion dv2 notebook?

    - by Greg Mattes
    I'm looking for a Windows XP Professional (32-bit) ATI video driver for an HP Pavilion dv2 (model 1118nr). I've downloaded and run several drivers packages, but none have worked so far. The notebook has a sticker on it that reads, "ATI Radeon Premium Graphics 3000 Series" The notebook has an AMD Athlon Neo 64 CPU and it came with Vista 64, but I have a requirement to run 32-bit Windows XP. Does such a driver exist, and if so, where is it? I've tried the AMD ATI graphics drivers portal, but the "Mobility Radeon" section does not list the 3000 series. The "Radeon" section does list the 3000 series, but the package I downloaded and installed from there was not helpful. I also selected "All Graphics - Notebook" on the "Search Drivers and Downloads" page, then selected "Windows XP Professional/Home" on the OS drop down, pressed "Submit", and downloaded and installed the only choice (this single choice is listed twice), but again, it didn't seem to help.

    Read the article

  • How to check CPU temperature on a HP P2000?

    - by Pavel
    I have a HP StorageWorks MSA Storage P2000 G3 SAS. show sensor-status gives something like # show sensor-status Sensor Name Value Status ---------------------------------------------------- On-Board Temperature 1-Ctlr A 53 C OK On-Board Temperature 1-Ctlr B 52 C OK On-Board Temperature 2-Ctlr A 61 C OK On-Board Temperature 2-Ctlr B 63 C OK On-Board Temperature 3-Ctlr A 53 C OK On-Board Temperature 3-Ctlr B 53 C OK Disk Controller Temp-Ctlr A 34 C OK Disk Controller Temp-Ctlr B 32 C OK Memory Controller Temp-Ctlr A 66 C OK Memory Controller Temp-Ctlr B 67 C OK [...] Overall Unit Status OK OK Temperature Loc: upper-IOM A 40 C OK Temperature Loc: lower-IOM B 38 C OK Temperature Loc: left-PSU 36 C OK Temperature Loc: right-PSU 40 C OK [...] is one of the values the CPU/FPGA temperature? Or, if not, how do I get it? Thanks!

    Read the article

  • Is there a HP DeskJet 5940 maintenance tool for Windows 7 x64?

    - by nbolton
    According to HP, the printer is not yet supported on Windows 7, so this could well be the answer. The printer is supported by Microsoft's drivers, but as far as I can tell, this is just a basic driver with no frills. I need to clean and align my ink cartridges because the quality right now is terrible. I've tried installing the Vista x64 drivers, but the setup detects that I'm not running Vista and does not allow me to continue. I was hoping there is a hack for this, or something similar. If not, I'll just plug it into my Vista laptop.

    Read the article

  • Why does the CentOS 5.8 install give an error about CD-ROM drive when using HP ILO?

    - by Mike B
    CentOS 5.8 I'm trying to install CentOS 5.8 on a box. I'm connecting the ISO to the server via a virtual disk using HP ILO. It initially seems to boot fine but in the middle of the anaconda text-mode package installation, it gives the following error: CD Not Found CentOS CD was not found in any of your CDROM drives. Please insert the CentOS CD and press OK to retry. If I click OK, it gives me the same error. I don't understand how it could get this far and then complain about the CD-ROM drive. Any thoughts?

    Read the article

  • HP DL180 G6 P410 8x SATA 1TB, what is the optimal configuration?

    - by Oneiroi
    I have a HP DL180 G6 with a P410 raid controller. Presently this runs using 4x 1TB Samsung Spinpoint SATA drives, in a RAID10 configuration using default settings. I am about to add a backplane to increase the drive capacity from 4 to 12 drives, and I plan to install 4 more 1TB SATA Drives. The drives are matched and have close serial numbers (They arrived together in the Manufacturers pallet). Model HD103UJ 1000GB/7200rpm/32M Rated for 3GB/s I will also be installing RHEL 6.1 x86_64. My question is what would be the optimal RAID settings (stripe etc.) for this configuration? To recap: 8x Model HD103UJ 1000GB/7200rpm/32M Rated for 3GB/s RAID 10 configuration. Thanks in advance. Update for role: Server is to become an iscsi target for an internal openstack deployment currently underway. (Glance) Will also provide virtualisation through KVM

    Read the article

  • Where can I find this HP modular keyboard or similar?

    - by Chaos Whistler
    I'm looking for an HP USB 104-Key Modular Keyboard with Detachable Number Pad (model number is DT530A, I believe), shown at this online store, where it's quite cheap but is sadly sold out. I've searched for hours on Google, and I've found several - the problem is they're Spanish or Greek keyboards but I need one in English (US keys preferred)! I would also be happy with a keyboard which is not exactly this but is similar, either with a detachable keypad or with no keypad at all, as long as the keyboard key layout and positioning is the same as on a standard keyboard. Can you help me find such a keyboard?

    Read the article

  • Can I mix drive types in an HP server?

    - by Generic Error
    I currently have the following setup: HP DL380 G4 Server 6 x 73GB, Ultra160, 10k, SCSI 80 Pin Drives Smart Array 6i Controller RAID 5 One of the drives is failing and needs to be replaced. I have on hand drives that are the same size and type, but are Ultra320, 15k instead. I have verified that these drives work in another system with the same type of drive controller. When I plug one of these in the system simply reports the drive as being offline and has nothing further to do with it. From what I have read these drives should be compatable. Should this work at all and if so, what might be preventing it?

    Read the article

  • Do any of the HP printers have implement printer sharing?

    - by BCS
    I've seen several (home grade) HP prints that have network port and allow connecting to them via that. However I haven't seen any way to use it without installing the printer specific drives. This seems a bit silly because I've seen printer sharing system (SMB I think) that didn't seem to need any printer specific software. My question is: Is there a way to use one of these with my printers? (I'm omitting the exact model in the hopes that answers for several models (or a resource that answers it for several models) will be given.)

    Read the article

  • Wifi function key not working on HP laptop

    - by lopsided98
    I have an HP Pavilion g7-1260 with Ubuntu 13.10 on it. I would like to be able to use the wifi toggle key on the keyboard to enable and disable wifi. My wifi works fine and the light on the key turns on when I enable wifi through the Ubuntu networking menu. The problem is that pressing the key does not do anything. It should be activated when I press fn + f12. I tried using xev to see if an event was generated but there wasn't one. I also tried the same thing with apci_listen but it didn't output anything. Does anyone know how to get the key to work?

    Read the article

  • Netbook Review: HP Mini 311

    With an HD display and an HDMI port, HP's $400 netbook is all about the video -- at least until we try it and find that an 11.6- rather than the usual 10.1-inch screen is irresistible for everyday productivity, too.

    Read the article

  • Netbook Review: HP Mini 311

    With an HD display and an HDMI port, HP's $400 netbook is all about the video -- at least until we try it and find that an 11.6- rather than the usual 10.1-inch screen is irresistible for everyday productivity, too.

    Read the article

  • Printer Review: HP LaserJet Pro 1606dn

    Looking for a black-and-white laser printer for your small office or workgroup? HP's $199 entry offers Ethernet, duplex printing, and fast performance -- and can install itself with no CD to insert or driver to download.

    Read the article

  • Printer Review: HP LaserJet Pro 1606dn

    Looking for a black-and-white laser printer for your small office or workgroup? HP's $199 entry offers Ethernet, duplex printing, and fast performance -- and can install itself with no CD to insert or driver to download.

    Read the article

  • Netbook Review: HP Mini 5102

    Its specs sound generic -- Intel Atom CPU, 10.1-inch screen, 1GB of RAM, the usual -- but HP's top-of-the-line netbook is anything but. Can it justify a $415 price in a world of $300 to $350 netbooks?

    Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >