Search Results

Search found 4487 results on 180 pages for 'printer sharing'.

Page 16/180 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

  • How to enabled Printer Sharing on Web Server 2008?

    - by FarrEver
    I am installing Web Server 2008 for my home network. I have 2 USB printers that I am connecting to this machine and want to share these printers so that my other machines can print to these 2 USB printers. (I previously had Win Server 2003 on this machine and was able to share both printers fine.) File and Printer sharing Inbound Role for my Private network is enabled, when I go into Network and Sharing Center and try to turn ON Printer Sharing, it never sticks. It always stays on OFF. I go to my installed printers and try to Share them and get the following error message: Printer Settings could not be saved. Remote connections to the Print Spooler are blocked by a policy set on your machine. I have not been able to find a policy on my machine that is preventing this. I have searched a lot over the past few days and most of the results say what I have done should work and there are also a number of search results that say Printer Sharing on Web Server 2008 is not allowed and you have to hack it. Has anyone installed Web Server 2008 and shared printers before? If so, what are the detailed steps you took to get this to work?

    Read the article

  • Printing special / extended characters on web page - Firefox or printer issue?

    - by edmicman
    My dad brought this to my attention and I'm looking into it, but thought I'd post here and see if anyone has any ideas... He's running Win7, using Firefox and printing to a wireless connected Brother HL-2170W printer. He's got a web page (http://cornandsoybeandigest.com/inputs/fertilizer/applying-nitrogen-after-planting-0512/index.html) that has extended/special characters in it - the funny "a" in Fernandez. The characters show correctly in Firefox on the page. He printed it, and the extended "a" printed as a diamond with a question mark. He says it shows that way in the print preview, too. I pulled up the same page in Ubuntu, Firefox, and it displayed in my print preview and physically printed everything correctly. I just checked on my wife's Win7 PC in Firefox and the print preview looked correct on her system, too. We have a Brother 2040 here. Soooo, my question is, is this possibly a problem in the browser somehow, or the printer driver? I'm leaning towards the printer driver now, but I can't say I've run into this before. Is it a setting somewhere? I just installed this printer for him the other day, using the CD that came with it; I could try updating the driver from Brother's website I guess. Is there anything else I should look at or check? Thanks!

    Read the article

  • Printing fails after first print with Centos 6 and HP LaserJet P3015dn printer

    - by Gavin Simpson
    Centos 6 recognises and configures a HP LaserJet P3015dn printer connected via USB. This machine is being configured as a small group file/print server. I can print a test page, which is processed/printed correctly. The next time printing is attempted (say printing a second test page), the page is not printed and the printer is set to disabled. The status of the printer is stated as: Stopped - /usr/lib/cups/backend/hp failed in the printer configuration dialogue. /var/log/cups/error_log contains this information (first two lines were there prior to the failed print job) E [24/Jun/2004:09:12:57 +0100] Returning HTTP Forbidden for Resume-Printer (ipp://localhost/printers/HP-LaserJet-P3010-Series) from localhost E [24/Jun/2004:09:20:59 +0100] Returning HTTP Forbidden for CUPS-Delete-Printer (ipp://localhost/printers/HP-LaserJet-P3010-Series) from localhost D [24/Jun/2004:09:37:28 +0100] [Job 28] The following messages were recorded from 09:36:43 AM to 09:37:28 AM D [24/Jun/2004:09:37:28 +0100] [Job 28] Adding start banner page "none". D [24/Jun/2004:09:37:28 +0100] [Job 28] Adding end banner page "none". D [24/Jun/2004:09:37:28 +0100] [Job 28] File of type application/vnd.cups-banner queued by "gavin". D [24/Jun/2004:09:37:28 +0100] [Job 28] hold_until=0 D [24/Jun/2004:09:37:28 +0100] [Job 28] Queued on "HP-LaserJet-P3010-Series" by "gavin". D [24/Jun/2004:09:37:28 +0100] [Job 28] job-sheets=none,none D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[0]="HP-LaserJet-P3010-Series" D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[1]="28" D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[2]="gavin" D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[3]="Test Page" D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[4]="1" D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[5]="job-uuid=urn:uuid:b3370a97-4ab6-3451-40a2-6239b13fa3e1 job-originating-host-name=localhost" D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[6]="/var/spool/cups/d00028-001" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[0]="CUPS_CACHEDIR=/var/cache/cups" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[1]="CUPS_DATADIR=/usr/share/cups" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[2]="CUPS_DOCROOT=/usr/share/cups/www" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[4]="CUPS_REQUESTROOT=/var/spool/cups" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[5]="CUPS_SERVERBIN=/usr/lib/cups" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[6]="CUPS_SERVERROOT=/etc/cups" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[7]="CUPS_STATEDIR=/var/run/cups" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[8]="HOME=/var/spool/cups/tmp" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[10]="[email protected]" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[11]="SOFTWARE=CUPS/1.4.2" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[12]="TMPDIR=/var/spool/cups/tmp" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[13]="USER=root" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[14]="CUPS_SERVER=/var/run/cups/cups.sock" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[15]="CUPS_ENCRYPTION=IfRequested" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[16]="IPP_PORT=631" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[17]="CHARSET=utf-8" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[18]="LANG=en_US.UTF-8" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[19]="PPD=/etc/cups/ppd/HP-LaserJet-P3010-Series.ppd" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[20]="RIP_MAX_CACHE=8m" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[21]="CONTENT_TYPE=application/vnd.cups-banner" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[22]="DEVICE_URI=hp:/usb/HP_LaserJet_P3010_Series?serial=VNBV993GM4" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[23]="PRINTER_INFO=Hewlett-Packard HP LaserJet P3010 Series" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[24]="PRINTER_LOCATION=electra.geog.ucl.ac.uk" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[25]="PRINTER=HP-LaserJet-P3010-Series" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[26]="CUPS_FILETYPE=document" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[27]="FINAL_CONTENT_TYPE=application/vnd.cups-postscript" D [24/Jun/2004:09:37:28 +0100] [Job 28] Started filter /usr/lib/cups/filter/bannertops (PID 2858) D [24/Jun/2004:09:37:28 +0100] [Job 28] Started filter /usr/lib/cups/filter/pstops (PID 2859) D [24/Jun/2004:09:37:28 +0100] [Job 28] Started backend /usr/lib/cups/backend/hp (PID 2860) D [24/Jun/2004:09:37:28 +0100] [Job 28] load_banner(filename="/var/spool/cups/d00028-001") D [24/Jun/2004:09:37:28 +0100] [Job 28] Page = 612x792; 12,12 to 600,780 D [24/Jun/2004:09:37:28 +0100] [Job 28] Page = 612x792; 12,12 to 600,780 D [24/Jun/2004:09:37:28 +0100] [Job 28] slow_collate=0, slow_duplex=0, slow_order=0 D [24/Jun/2004:09:37:28 +0100] [Job 28] Before copy_comments - %!PS-Adobe-3.0 D [24/Jun/2004:09:37:28 +0100] [Job 28] %!PS-Adobe-3.0 D [24/Jun/2004:09:37:28 +0100] [Job 28] %%BoundingBox: 12 12 600 780 D [24/Jun/2004:09:37:28 +0100] [Job 28] %cupsRotation: 0 D [24/Jun/2004:09:37:28 +0100] [Job 28] %%Creator: bannertops/CUPS v1.4.2 D [24/Jun/2004:09:37:28 +0100] [Job 28] %%CreationDate: Thu 24 Jun 2004 09:36:43 AM BST D [24/Jun/2004:09:37:28 +0100] [Job 28] %%LanguageLevel: 2 D [24/Jun/2004:09:37:28 +0100] [Job 28] %%DocumentData: Clean7Bit D [24/Jun/2004:09:37:28 +0100] [Job 28] %%Title: (Test Page) D [24/Jun/2004:09:37:28 +0100] [Job 28] %%For: (gavin) D [24/Jun/2004:09:37:28 +0100] [Job 28] %%Pages: 1 D [24/Jun/2004:09:37:28 +0100] [Job 28] %%DocumentSuppliedResources: font Monospace D [24/Jun/2004:09:37:28 +0100] [Job 28] %%+ font Monospace-Bold D [24/Jun/2004:09:37:28 +0100] [Job 28] %%+ font Monospace-BoldOblique D [24/Jun/2004:09:37:28 +0100] [Job 28] %%+ font Monospace-Oblique D [24/Jun/2004:09:37:28 +0100] [Job 28] %%EndComments D [24/Jun/2004:09:37:28 +0100] [Job 28] Before copy_prolog - %%BeginProlog D [24/Jun/2004:09:37:28 +0100] [Job 28] STATE: +connecting-to-device D [24/Jun/2004:09:37:28 +0100] [Job 28] prnt/backend/hp.c 762: ERROR: cannot open channel PRINT D [24/Jun/2004:09:37:28 +0100] [Job 28] Backend returned status 1 (failed) D [24/Jun/2004:09:37:28 +0100] [Job 28] Printer stopped due to backend errors; please consult the error_log file for details. D [24/Jun/2004:09:37:28 +0100] [Job 28] End of messages D [24/Jun/2004:09:37:28 +0100] [Job 28] printer-state=5(stopped) D [24/Jun/2004:09:37:28 +0100] [Job 28] printer-state-message="/usr/lib/cups/backend/hp failed" D [24/Jun/2004:09:37:28 +0100] [Job 28] printer-state-reasons=paused /var/log/messages contains the following reports associated with the recognition of the printer and the failed print job: Jun 24 09:35:07 electra kernel: usb 1-8: new high speed USB device using ehci_hcd and address 2 Jun 24 09:35:07 electra kernel: usb 1-8: New USB device found, idVendor=03f0, idProduct=8d17 Jun 24 09:35:07 electra kernel: usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jun 24 09:35:07 electra kernel: usb 1-8: Product: HP LaserJet P3010 Series Jun 24 09:35:07 electra kernel: usb 1-8: Manufacturer: Hewlett-Packard Jun 24 09:35:07 electra kernel: usb 1-8: SerialNumber: VNBV993GM4 Jun 24 09:35:07 electra kernel: usb 1-8: configuration #1 chosen from 1 choice Jun 24 09:35:07 electra kernel: usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x8D17 Jun 24 09:35:07 electra kernel: usbcore: registered new interface driver usblp Jun 24 09:35:07 electra udev-configure-printer: invalid or missing IEEE 1284 Device ID Jun 24 09:35:08 electra hp[1942]: io/hpmud/pp.c 627: unable to read device-id ret=-1 Jun 24 09:35:09 electra python: io/hpmud/pp.c 627: unable to read device-id ret=-1 Jun 24 09:35:51 electra kernel: usblp0: removed Jun 24 09:37:28 electra hp[2860]: io/hpmud/dot4.c 254: unable to read Dot4ReverseReply data: Resource temporarily unavailable exp=2 act=0 Jun 24 09:37:28 electra hp[2860]: io/hpmud/dot4.c 330: invalid DOT4InitReply: cmd=0, result=20#012, revision=0 Jun 24 09:37:28 electra hp[2860]: prnt/backend/hp.c 762: ERROR: cannot open channel PRINT I am now at a loss as to how to proceed to get this printer working on my Centos machine. How can I configure the machine to print more than a single print job without needing to be unplugged/plugged in repeatedly?

    Read the article

  • Google Drive SDK: Sharing files and managing permissions

    Google Drive SDK: Sharing files and managing permissions During this session we'll explain how to use the Google Drive SDK to manage permissions and sharing settings of files. We'll go through the various permission types, roles and values and show to easily embed the Google Drive sharing dialog in your app. From: GoogleDevelopers Views: 0 0 ratings Time: 00:00 More in Science & Technology

    Read the article

  • Printer Redirection from 2003 Terminal Server to 2008 Terminal Server

    - by xmaveric
    Our environment is a terminal server cluster (Win2003 servers) that everyone connects to do do their work. I have set up a new Win2008 R2 machine with the intention of using it to publish our main application to the TS farm. The idea was to keep this server dedicated to one application to avoid driver/dll conflicts with other software. I created a RemoteApp on the new server and made an .rdp file and placed it on the desktop of our TS farm servers. The problem I am running into is that when I connect to the RemoteApp, it doesn't show the printers that are installed on the TS server I am connecting from. We have over 20 printers installed on our TS servers, each with different drivers and permissions. I really do not want to reinstall all of these on the RemoteApp server so I was hoping Printer Redirection would handle this. It would appear that because the RDP client for Server 2003 x64 is 6.0, that version doesn't support the Easy Print feature (requires 6.1). I can't find any newer version on the MS site to download for Win2003 x64. How can I get the printers on the TS farm machine to redirect so they are viewed by the RemoteApp machine?

    Read the article

  • Windows 7 add printer, cancelled, but port still in use. How to remove?

    - by Jake
    I tried to add a network printer at www.xxx.yyy.zzz, but halfway it when it asked for a driver, I cancelled it because I do not have the driver at hand. Later when I try to add again, it tells me the port (www.xxx.yyy.zzz), which is automatically specified as the same as the IP for the printer, is already in use and then suggest www.xxx.yyy.zzz_1 Now, I cannot find the www.xxx.yyy.zzz printer anywhere such that I can remove it and use back the same port. How should I do it? Any ideas? Thanks.

    Read the article

  • Does laser printer use toner when switched on/off?

    - by Alan Harris-Reid
    I have recently purchased a HP LaserJet M175nw laser printer which goes into sleep-mode after 10 minutes of non-use. I know sleep-mode uses a very small amount of power, but the flashing light on the control panel is driving me nuts! I know I can turn-off the printer via. the on/off button, but when it is turned-on manually, there is some whirring sound which I guess might be the machine warming-up. My question is... Is any toner used during this warm-up (or cleaning) cycle? Am I better-off keeping the printer in sleep mode, or is it ok to turn off manually? TIA Alan

    Read the article

  • Do any of the HP printers have implement printer sharing?

    - by BCS
    I've seen several (home grade) HP prints that have network port and allow connecting to them via that. However I haven't seen any way to use it without installing the printer specific drives. This seems a bit silly because I've seen printer sharing system (SMB I think) that didn't seem to need any printer specific software. My question is: Is there a way to use one of these with my printers? (I'm omitting the exact model in the hopes that answers for several models (or a resource that answers it for several models) will be given.)

    Read the article

  • Very slow printing from print server

    - by evolvd
    Print server is a VM on Xen The VM is Windows 2003 32bit. During the issue the VM is not being taxed in anyway, cpu, memory, hd read/write, and network speed is all good. The problem that I see is the transfer of the print file from the print server to the printer. The 80Mb file is transferred from the client to the print server in about 2 minutes but then it takes about 2 hours for that file to be sent to the printer. I can't figure out why this would just start to happen. The printer is rebooted every evening and is just used for one large print job in the morning. The server has been rebooted with no effect I changed the spool option to send the entire spool to the server before printing starts and it had no effect. This printer problem did happen to come about after some changes to the Xen environment. The Xen servers changed from using HBA NIC cards to software iscsi and a new switch was put in. I don't think this is related to the problem since all the speeds on the VMs are better now. The changed happened on Saturday and the first print to this printer happened on Monday morning. I'm just putting that out there but like I said I don't think it is related but I don't want to rule it out. At this point I don't have many other options besides the physical layer. I can switch out network cable that goes to the printer and I might be able to print the same job to another printer. I wont be able to test those things out till this afternoon though. Any other ideas or test I could do to try to find the reason for the slow speed? I forgot to say that this is only happening when printing to this one printer. ===Update=== I found out that there are a few printers that currently have this issue, not just the one. There are over 30 printers on the server though so I know it's not happening to all of them. I printed a large pdf doc from the server and it was able to print at the normal speed. If the machine sends the large print request it gets to the server fine but then slow to get from the server to the printer. If sent directly from the printer it gets to the printer at the normal speed. The question now is why is there a speed difference when it comes from the machine and why would it start now?

    Read the article

  • How does one extract the Canon ip4600 drivers in inf form?

    - by Trix
    I have a x64 machine which needs "additional drivers" for x86 clients. The problem I have is I cannot get the proper .inf files so I can use them. Canon only provides an .exe file, which when extracted has other .exe files and some dll files. I believe Canon changed their drivers, because I did have them extracted at one point, but sadly did not save them :(. The drivers are available here. Hopefully I am clear in what I am trying to do. Canon provides the .exe file. The .exe file when extracted does not produce any .inf driver files. Thanks!

    Read the article

  • Server 2008 R2 - Unable to install any printer drivers

    - by toffitomek
    My problem is exactly this same as described here: Server 2008 R2 - Unable to install any printer drivers Options - google groups I have few Windows 2008 R2 (no SP1) servers in remote offices, mostly in Domain Controller, and many of them have problems installing ANY printer drivers. following errors show up in Event Log when adding printer driver under Print and Document Services/Print Management/Print Services/ /Drivers OR trying any other way to install drivers: EventID 215: Installing printer driver - failed, error code 0x57, HRESULT 0x80070057. See the event user data for context information. EventID 215: Installing printer driver Canon iR C2380/2550 PCL6 failed, error code 0x0, HRESULT 0x80070057. See the event user data for context information. EventID 215: Installing printer driver Canon iR C2380/2550 PCL6 failed, error code 0x490, HRESULT 0x80070057. See the event user data for context information. in this particular server case this is problem with Canon iRC 2380i printer with Canon Generic PCL6 Driver, but it seems to apply to any driver and any printer (tried different drivers, different versions, PCL, postscript, etc) I'm using 64 bit drivers that should be working on this platform. Any help will be appreciated.

    Read the article

  • Diagnosing the problem when Canon printer fails to print under Ubuntu

    - by MMA
    I understand that the issue of Canon printer under Linux has a number of posts. Actually one of these, was started by me. After inputs from others I have successfully printed using Canon LBP6000 from my Ubuntu machine for around a year. If it failed to print, restarting the daemon using this homemade script coaxed the printer to print. #!/bin/bash pkill -9 -x ccpd pkill -9 -x captmoncnabc /etc/init.d/ccpd start /etc/init.d/ccpd status Recently, I am not successful any more, or successful on a limited and sporadic basis. Sometimes it prints when turned on after logging in, sometimes when the driver is reinstalled. I keep on trying the random steps (call abracadabras) until I get success. Again, not always success comes. I frustrate on for hours only to get single page printed. I loose precious time on the issue of printing. I have read and read all the documents available over the Internet. However, if you please notice, none of the guides, articles, tutorials (these are too many to list here) seem to be dealing with diagnosing the problem when it fails to print. They tell you where to find the drivers, how to install them, or which script to run to make the installation process automatic. Yes, some of the articles or comments suggest a step to try, without any systematic order. But these fail to suggest a step based on symptoms, mostly. This morning, my Canon LBP6000 failed to print. After sometime, there was a message for system error, details of which was found to be something like this. When I search for this error (c3pldrv crashed with SIGSEGV in write ()), I find a number of articles including this one. None of these are actually helpful. Mostly, these are 'me too', 'tell me if you find anything'. Running captstatusui -P LBP6000 produced this, Yes, the printer is connected and actually turned on. I believe that there a number of frustrated Canon printer users out there like me. But there is not a step by step definitive guide to systematically diagnose a non-printing printer. Do you think that you can provide your diagnosing inputs so that a systematic document can be built? May be we will want the Ubuntu users to stay away from Canon printers. But as I believe, as a Linux user for more than fifteen years, such a scenario is not acceptable any more. May be this was acceptable in the infancy days of Linux, but not today. I am using Ubuntu 12.04, by the way, I prefer LTS versions.

    Read the article

  • How can I invoke the dialog to set printer options manually?

    - by FromTheMountain
    I'm using WPF and need to let users set some print related options like printer and printer properties (e.g. papertray, landscape/portrait, duplex, etc). I'm aware of the PrintDialog class to get a PrintQueue and PrintTicket object. However I need to create I custom solution and can not show the PrintDialog. I manage to get the available PrintQueue objects and let users select a printer. I'm struggling with the printer properties. My question is: how can I show the dialog in which a user can set the printer properties for the selected PrintQueue (the dialog that is shown when a user clicks on the Properties button in the WPF PrintDialog).

    Read the article

  • Remote application sharing tool used at ASP.NET MVC podcasts

    - by zerkms
    Hello Does anybody know what tool used while podcasts were recorded here: http://www.asp.net/mvc/application-development/ For example at lesson #17 (with Atwood) The sample of what i'm talking about you can see at 6m28s at the window title, near minimize/maximize/close button. There is a green circle with "Currently sharing" Cannot google anything relevant, so will be appreciate to your help ;-)

    Read the article

  • I do not know whether it should continue to develop this code sharing service :(

    - by user296268
    I created an open source Project : TwPaste on github. It provides The Social Source Code and Plain Text Sharing Service. You can post any source code here , All pastes and comments will post to twitter . I'm not sure the usefulness of this project , so I need your feedback to improve it , if you think it is useless , please tell me directly, I'll close it soon. Thanks. You can access it form below link twpaste.com

    Read the article

  • Sharing code between two different git projects

    - by ripper234
    I have two different .Net projects, hosted on github. I would like to create a shared "commons" library for the two projects. How should I structure my repository to facilitate this sharing? Ideally, a change in this common library in one project could easily be pushed into the other project. I prefer to keep the code itself editable from the two projects (within Visual Studio), and not include it as a library. Are there best practices for this?

    Read the article

  • IE8 Session sharing across tabs and windows

    - by Clint
    Has anyone implemented any effective solutions to address the numerous issues that are caused by IE8's session sharing functionality? We've gotten very close by writing a custom http module that compares session and view state values, but our efforts are thwarted by things such as accelerator keys and unaccceptable copying of session objects. This is a VB.Net web app.

    Read the article

  • mysql query to select the bottom values from a table

    - by S.PRATHIBA
    Hi all, I have the following table. mysql> select * from consumer2; SERVICE_ID SERVICE_TYPE CONSUMER_FEEDBACK 31 PRINTER 1 32 PRINTER -1 33 PRINTER 0 34 PRINTER -1 35 PRINTER 0 31 PRINTER 0 32 PRINTER 1 35 PRINTER 1 31 PRINTER 0 From the above table i need to select the bottom 4 values using mysql i need to get the output as follows SERVICE_ID SERVICE_TYPE CONSUMER_FEEDBACK 31 PRINTER 0 32 PRINTER 1 35 PRINTER 1 31 PRINTER 0 Please help me.Thank u in advance.

    Read the article

  • How to have Vista OS send documents to printer without waiting in front?

    - by Greenleader
    Hi, I got a print server on our old printer. I have a problem, because Vista has its own queue. I want to bypass this queue and send everything straight away to printer so the print server deals with queue and not vista. Problem is, when second document is being printed from the same computer after first one. Vista is still waiting for info on finishing the first job even 5 minutes after it was REALLY finished.

    Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >