Search Results

Search found 5853 results on 235 pages for 'vivian short'.

Page 161/235 | < Previous Page | 157 158 159 160 161 162 163 164 165 166 167 168  | Next Page >

• PC -> TV HDMI suddenly doesn't work, any other option does

  - by XSlicer

  So my parents wanted to connect their PC to their TV, so they bought a 10m (35 ft) cable. It all worked perfectly. Then my mom tripped over the cable, breaking it. She somehow got a free replacement, but at the same time some more expensive one from an uncle. Now the problem is that this suddenly doesn't work anymore (TV saying "Format not supported"). I've tried several other things to pinpoint the actual problem, but none brought me something conslusive: PC (hdmi) to TV doesn't work (both cables) PC (hdmi) to TV doesn't work (short cable) Laptop (hdmi) to TV work (same cables) BluRay (hdmi) to TV works (same cables) PC (hdmi) to monitor works (same cables) PC (DVI w/ adapter HDMI) to TV works (same cables) I've tried different ports, tried Linux, reinstalling drivers (the graphics card is internal using an i5 sandy bridge. Normally it's running Windows 7 Home Prem, the TV being a Philips 37PFL7605H). So basically, everything works, except that thing what we want. The only things I am thinking of is that the sound is interfering or that the HDMI-output is somehow broken. Or is it anything else? I'm kind of lost.

  Read the article

• ssh Prompts For Password After Account Unlocked - Despite ssh key?

  - by user1011471

  Here's what happened: I set up ssh key so that user could ssh from A to B without a password. I got user's password wrong in some other context too many times, and user's account got locked out. (IT uses Active Directory here) IT unlocked the account. Concurrent to the unlocking, a script was running, calling something like ssh user@B some-health-check-command every 5 seconds or so -- which seemed to work fine before I caused user to get locked out in step 2. IT reports user reliably gets locked out a short time after each unlock attempt. I thought the ssh key would allow ssh user@B some-command as long as the account is not locked. But it behaves as if, when user gets unlocked, B suddenly asks for a password and since my command repeatedly runs without supplying a password, the account gets locked out after 5 attempts. Account cannot be accessed at this time. Please contact your system administrator. My questions are... Is that what's happening? Or: what's happening? More importantly: How can I reconfigure things such that my script doesn't cause problems? Can I accomplish what I want without having to install Expect? (I don't know if I have permission to do so) Other notes: Not using ssh-agent currently. The ssh command is running on our Jenkins master, a linux box. A and B are Mac OS X. user is managed in Active Directory and normally can sign into all three machines. Other than these things and the ssh key I set up, everything else has the default configuration as far as I know.

  Read the article

• Is there a clean way to obtain exclusive access to a physical partition under Windows?

  - by zneak

  Hey guys, I'm trying, under Windows 7, to run a virtual machine with VMWare Player from an OS installed on a physical partition. However, when I boot the virtual machine, VMWare Player says that it couldn't access the physical drive for writing. This seems to be a generally acknowledged problem in the VMWare community, as Windows Vista introduced a compelling new security feature that makes it impossible to write to a raw drive without obtaining exclusive access to it first. I have googled the issue and found a few workarounds. However, the clean ones seem to only work on whole physical disks, and not on partitions. So I would be left with the dirty solution. In short, it meddles with the MBR to erase any trace of the partitions to use, makes Windows forget about them, then restores the MBR so we can launch the VM. I'm not sure I want to do that. Is there a way to let VMWare acquire exclusive access to the partition without requiring me to nuke it away? What I'd be looking for, I suppose, is a way to put just partitions offline instead of whole physical drives.

  Read the article

• Amazon EC2: Instances, IPs and a wordpress blog (LAMP)

  - by JustinXXVII

  I had a link to my blog posted on Reddit yesterday and MySQL crashed on my EC2 Micro instance. I know I didn't have that many visitors because I used a marketing link that tracks hits. The link got 167 hits over the course of the last 18 hours, and MySQL crashed twice. So anyway, 167 visits is not a lot, so I've done some short term optimizations like restricting the number of Apache threads to limit the MySQL calls. I also set up WP Super Cache to serve static content. Soon I'm going to offload all of my images to S3 or CloudFront. So this leads me to my question. If this doesn't seem to help, and if i have another traffic "spike", how do AMIs work when you have a MySQL database? I think I understand that if you have more than one instance and assign the same Elastic IP to both of them, the incoming traffic gets distributed among both. But what happens when the MySQL database gets updated on one of the instances? I just need to wrap my mind around what happens when I create an AMI and then launch a new instance to help with traffic. Thanks for your suggestions.

  Read the article

• How to scan multiple pages from a book under Linux?

  - by rumtscho

  I want the process to look like: I choose the correct scan settings (dpi, color depth, etc) I lay the first page on the scanner and trigger the process The scanner scans the page and waits for me to position the next page correctly I confirm that the next page is ready for scanning Repeat the above two steps until I tell the scanner that there are no more pages to come The scanner saves everything into a single PDF. I tried both xsane and gscan2pdf. First problem: they want me to know how many pages will be scanned. This is already a nuisance, but I can do the counting if needed. The main problem is that in step 3, the scanner does not pause. It is probably optimised for being fed loose sheets. The next scan process is triggered automatically as soon as the CCD has returned to the start position. The time the scanner needs to return the CCD is very short and I can't turn the page and position the book properly. Is there a software which can do the scan process in the way I described above, or did I just miss a setting available in xsane or gscan2pdf to make the scanner pause? If it makes any difference, the scanner is an Epson Stylus SX620FW, I run it using the manufacturer-provided driver.

  Read the article

• Office Compatibility Pack and File Permissions

  - by hymie

  MS isn't my thing, so I hope somebody can give me a pointer. We have a Windows domain, with a Server-2003-SP1-Enterprise file server. One of the specific files is a MS Excel 2007 (XLSX) file created by user LK. In the "Security" preferences setting, about a half-dozen users (including me) have access to this file. LK is the owner and has "full control", while the rest of us have "Read" , "Read & Execute", and "Write" permission. LK is also the owner of the directory that this file resides in. I don't know if that's relevant. So far so good. My desktop machine has Windows XP SP3 , and Excel 2003 SP3 , and the "Office Compatibility Pack" which lets me read and write the new XLSX files. However, whenever I write the file, the permissions are changed. The newly-written file only has permissions for LK and me, and both are "Full control" So in short, what am I doing wrong, and how should I set this up to do it right, keeping the permissions on the file that were there when I started?

  Read the article

• Upgrade Centos 5 tot PHP 5.2 or 5.3 [recommended way?]

  - by solid

  We are using Zend Framework and in version 2, php 5.2 will be the minimum requirement. We love CentOS and we'd like to keep using it, but PHP 5.1 just won't do anymore when developing web applications with Zend framework. I found several links to solutions to upgrade with external repositories. http://serverfault.com/questions/106801/recommended-method-to-upgrade-php-5-1-6-to-5-2-x-on-centos-5 http://www.webtatic.com/blog/2009/05/installing-php-526-on-centos-5/ http://www.webtatic.com/blog/2009/06/php-530-on-centos-5/ We'd like to see another solution with the use of an "official?" CentOS repository if any is available. We only need to upgrade PHP, the rest of the CentOS setup is fine the way it is. For us, it's important however to keep the YUM cycle intact using the normal repositories. So in short: is it even possible to upgrade only PHP by using an external repo or otherwise? While still upgrading all our other packages safely through normal yum usage? Thanks for your help!

  Read the article

• How do I uninstall a ruby version installed via source?

  - by Aaron McIver

  I installed a version (1.9.3-p194) of ruby via source using make install and realized this may have been the wrong route to take. Upon doing this, I realized this was a mistake and I should be using a solution such as rvm to address my ruby versions within the OS. I looked to see if an uninstall existed to be ran in conjunction with make and it didn't. I then proceeded to install rvm and add the aforementioned version in to my list of managed rubies within rvm which is not listed as ext-ruby-1.9.3-p194. rvm rubies ext-ruby-1.9.3-p194 [ x86_64 ] =* ruby-1.9.3-p194 [ x86_64 ] # => - current # =* - current && default # * - default** When I perform an rvm remove, it simply removes it from the rubies list however it still exists within /usr/local/bin. I am not concerned with the system install ruby version residing in /usr/bin as I understand that is tied to the OS and should simply be ignored. How can I safely uninstall/remove the aforementioned version and all the places in which it was installed, short of looking at the install script?

  Read the article

• tc u32 --- how to match L2 protocols in recent kernels?

  - by brownian

  I have a nice shaper, with hashed filtering, built at a linux bridge. In short, br0 connects external and internal physical interfaces, VLAN tagged packets are bridged "transparently" (I mean, no VLAN interfaces are there). Now, different kernels do it differently. I can be wrong with exact kernel verions ranges, please forgive me. Thanks. 2.6.26 So, in debian, 2.6.26 and up (up to 2.6.32, I believe) --- this works: tc filter add dev internal protocol 802.1q parent 1:0 prio 100 \ u32 ht 1:64 match ip dst 192.168.1.100 flowid 1:200 Here, "kernel" matches two bytes in "protocol" field with 0x8100, but counts the beginning of ip packet as a "zero position" (sorry for my English, if I'm a bit unclear). 2.6.32 Again, in debian (I've not built vanilla kernel), 2.6.32-5 --- this works: tc filter add dev internal protocol 802.1q parent 1:0 prio 100 \ u32 ht 1:64 match ip dst 192.168.1.100 at 20 flowid 1:200 Here, "kernel" matches the same for protocol, but counts offset from the beginning of this protocol's header --- I have to add 4 bytes to offset (20, not 16 for dst address). It's ok, seems more logical, as for me. 3.2.11, the latest stable now This works --- as if there is no 802.1q tag at all: tc filter add dev internal protocol ip parent 1:0 prio 100 \ u32 ht 1:64 match ip dst 192.168.1.100 flowid 1:200 The problem is that I couldn't find a way to match 802.1q tag so far. Matching 802.1q tag at past I could do this before as follows: tc filter add dev internal protocol 802.1q parent 1:0 prio 100 \ u32 match u16 0x0ed8 0x0fff at -4 flowid 1:300 Now I'm unable to match 802.1q tag with at 0, at -2, at -4, at -6 or like that. The main issue that I have zero hits count --- this filter is not being checked at all, "wrong protocol", in other words. Please, anyone, help me :-) Thanks!

  Read the article

• How to verify TRIM/discard on encrypted swap?

  - by svarni

  I am using an encrypted swap partition via ecryptfs-setup-swap on my Ubuntu 13.04 computer using a SSD. I have manually set up trim for my ext4 root partition (simply by adding the "discard" option in /etc/fstab). I also manually ran fstrim on the root partition prior to booting and using dstat I saw that for a few seconds several GB/s of data have been written to the disk. That was presumably the effect of the trim command. These high writerates are reproducable by deleting huge files and have not occured before setting up trim, so I take them as evidence for working trim/discard. Manually enabling trim on my root partition has stopped the wearout of my precious new disk from 365 used reserved blocks (out of 6176 total) within three months down to 0 additional used reserved blocks within three additional months (data from SMART attributes). Because I want to minimize the wearout of my SSD I now would like to know whether my swap partition (which is encrypted using ecryptfs-setup-swap) also makes use of the trim/discard option. I tried sudo swapon -d -v /dev/mapper/cryptswap1 but did not receive particular information ("-v") about whether trim/discard ("-d") was applied. If unsupported, i would expect a message. Then I tried sudo dd if=/dev/sda6 count=1 BS=1M | xxd | less directly after booting and when no swapspace was used but I saw not only zeroes. I assume, when looking at freshly trimmed regions, the disk would send zeroes instead of reading random sectors (and according to some forums, (unencrypted) swap space is trimmed once upon boot). Long story short: Are there any ideas on how to test if trim is effectively used for my encrypted swap? And if not, any ideas on how to - at least manually, for once - trim the whole swap space? I wouldn't want to tinker with the partition itself, because I dont know if it needs to be reinitialized as (encrypted) swap - I dont want to be left with an unbootable system :)

  Read the article

• SPF for two different outgoing servers?

  - by Marcus

  I have ran into a problem that I think someone should have a really clever answer for. Today we have our own mailserver that looks like "mail.domain.com" – which we use to send out mail to our customers (with a modified PHPMailer script). Usually around 5000 mails every day. Everything from customer support to invoices goes through there. The from-header is set to "[email protected]". We are now thinking of migrating to Google Apps for internal use (with 70+ users). However, we cannot use Gmails SMTP for sending "bulk" mails (they have a limit of 500 outgoing mails per day) so we really want to keep using our current system for sending automated mail to our customers – and using gmails SMTP for our internal use. So, how do we set up our SPF-records (Sender Policy Framework) for this? We do not want to get stuck in any filters for "spoofing" the sender from either type of account (the ones sent from our own server, and through Gmails). In short: we want to be able to use the same e-mail adress (for sending) on two different SMTP servers (and therefore two different IP-adresses). Anyone with a good knowledge off SPF who knows how to go about? Or if it is even possible? Anything else I should think of when switching to Google Apps?

  Read the article

• Cisco 851 (IOS) router: FastEthernet 4 (WAN) got the shutdown flag.

  - by cjavapro

  At a customer location there was a Cisco 851 router (which uses IOS). The PCs on location were all of a sudden unable to connect. We came on site and found that FastEthernet 4 (the WAN port) was "administratively down". We ran these commands to resolve it config t interface fa4 no shutdown exit exit write Now the mystery is how the shutdown flag got there in the first place? The router was on battery backup... but during the outage it was power cycled by the customer. It is possible that there was a short outage by the ISP and that the power cycle caused the shutdown flag to come up. There may have been a hack or an attack pattern that caused the shutdown flag to come up. There may have been a hack or an attack pattern that the router to become unavailable and then caused the shutdown flag to be added on startup. Question: Does anybody have any clues? or at least remember that they had a shutdown flag come up on their WAN port also?

  Read the article

• How can I get around windows 8.1 store (& metro apps) not working with UAC disabled

  - by Enigma

  I have UAC disabled because it is annoying and causes more problems that it could ever possibly solve, at least for me. Here is yet another problem, and it seems to be due to a recent update as I don't remember it in the past. Even with a MS account, I can't use the store because UAC is disabled. How can I get around this? Short term I can just enable it, reboot, use store, disable it, reboot and be on my way but there has to be a better way (other than MS getting their software completely right - like that will happen anytime, ever) Edit: Apparently this is far more of an issue than I originally thought. Now every(?)many metro apps requires UAC. Anyone aware of the update this got rolled in with? Thankfully netflix isn't affected which is the only metro app I use at the moment. What I see: Event Log info: Activation of app winstore_cw5n1h2txyewy!Windows.Store failed with error: This app can't be activated when UAC is disabled. See the Microsoft-Windows-TWinUI/Operational log for additional information.

  Read the article

• Spotlight has stopped indexing/returning anything in /Applications

  - by pra

  After a recent kernel panic & restart, Spotlight no longer seems to know anything about the files under my /Applications folder. I used to launch Safari.app, Opera.app, Textedit.app, etc via Spotlight as a matter of routine. Now, I get "No results found" for all of them (except Textedit.app, which launches a demo text editor from a Qt installation). The programs are still there & still launch directly from Finder. I've already run disk utility & verified the disk, no issues. I repaired disk permissions, which made several changes, but to no effect. Is there anything else I can do, short of re-installing MacOS? Update: I already verified that "Applications" was still checked in my Spotlight preferences. It was still returning applications located elsewhere (the Qt textedit sample app), so that shouldn't have been the issue. A few hours later it resolved itself; I guess there's a background process running on some interval.

  Read the article

• Set primary group of file or directory on Samba share from Windows

  - by Hubert Kario

  Short version: I have such situation on a Samba share: $ ls -lha total 12K drwxr-xr-x 3 hka Domain Users 4.0K Jan 11 17:07 . drwxrwxrwt 19 root root 4.0K Jan 11 17:06 .. drwxr-xr-x 2 hka Domain Users 4.0K Jan 11 17:07 dir A -rw-r--r-- 1 hka Domain Users 0 Jan 11 17:07 file A How am I able to change this to following using only Windows SMB/CIFS client (using 3rd party applications is OK) $ ls -lha total 12K drwxr-xr-x 3 hka Domain Users 4.0K Jan 11 17:07 . drwxrwxrwt 19 root root 4.0K Jan 11 17:06 .. drwxr-xr-x 2 hka ntpoweruser 4.0K Jan 11 17:07 dir A -rw-r--r-- 1 hka ntpoweruser 0 Jan 11 17:07 file A Rationale and background info I'm using POSIX ACLs on Samba shares. Together with acl group control for Samba, it allows me to delegate management of permissions to different users based on group membership. Thing is, when I create a new file on a Samba share, I'm unable to set its primary group (the one that grants permission to change its permissions). It's being set to my primary group (Domain Users) or group set using force group option in smb.conf share definition. Removing all groups in windows except the one I want to become the new primary group doesn't work. I can change it using chgrp group folder/ as regular user though shell, but it's suboptimal (not all users are *nix users). Trying to set new owner to group from Windows file permission window makes the Samba to return permission denied with following log entry: [2012/01/05 21:13:03.349734, 3] smbd/nttrans.c:1899(call_nt_transact_set_security_desc) call_nt_transact_set_security_desc: file = projects/project A/New folder, sent 0x1 [2012/01/05 21:13:03.349774, 3] smbd/posix_acls.c:1208(unpack_nt_owners) unpack_nt_owners: unable to validate owner sid for S-1-5-21-4526631811-884521863-452487935-11025 [2012/01/05 21:13:03.349804, 3] smbd/error.c:80(error_packet_set) error packet at smbd/nttrans.c(1909) cmd=160 (SMBnttrans) NT_STATUS_INVALID_OWNER The SID is correct and belongs to group I specified in GUI.

  Read the article

• Computer randomly shuts itself off

  - by Decency

  I have not been able to determine a pattern for why this happens, despite my best efforts. I've attempted to run it on full power with Prime95 and this doesn't trigger a restart. Generally the restarts occur while I'm playing games, watching videos, or even just having multiple tabs open in a browser. However, I often play processor intense games for hours without any restarts occurring, and sometimes they'll happen 3-4 times in an hour during less intense activity, so I don't think that is the problem. I imagine it has something to do with overheating or power consumption so I've been monitoring CPU temperature and cleaning with compressed air, but the problem keeps happening. I don't know how to track power consumption, and assume that this is the problem. Whenever this occurs, the sound gets stuck in a short loop of whatever was playing at the time, though restarts also occur when nothing is playing. Here is a screenshot of temperatures: and under load: Here's the parts list: http://secure.newegg.com/WishList/PublicWishDetail.aspx?WishListNumber=10546754 As shown in the list, the case includes a 585W Power Supply, which I've been told should be plenty. I built the computer myself with a friend's guidance but it's very possible I did something wrong. Right now I'm looking into ensuring that I have the latest drivers for all components. Any help would be appreciated- thanks.

  Read the article

• Advice for UPC/Surge Protector in home office

  - by Fred

  I'm just starting out as an independant developer, mostly Unix stuff with some Windows thrown in occasionally. I've been running two machines, a linux and a windows dev machine. Long story short, we had a bad storm come through last week and I unplugged one machine, forgot to unplug the other and the p/s and mobo ended up dead. Luckily I backup to an external service religiously (rsync.net for anyone interested), so there was no loss in data, but it did show me a glaring hole in my current setup, namely, lack of UPC and Surge Protection (this has honestly never been an issue before). Can anyone recommend a UPC/Surge Protector for a home office? It only needs to support a single machine (I opted to use vmware instead of rebuilding that machine), but it's a quad core Phenom 2 with a 1k watt p/s. This is outside my experience so I thought I'd get some input from others. I'm looking for something that's reasonably priced and does the job reasonably well. I don't need absolute 100% uptime, just something to protect my PC better than it is now.

  Read the article

• Block SMTP connections from mail domains which don't themselves accept SMTP connection.

  - by bignose

  I'm administrating a mail service for a small business. Their mail host's internet connection is an ADSL service with a permanent IP address. Unfortunately, many misconfigured mail systems will happily deliver to this host, but, when the host attempts to send mail back (e.g. a bounce notice, or a normal response from someone), the original sender refuses to receive connections from this host. That misconfiguration makes their system a one-way mail sender, which is a problem. How can I configure Postfix on this customer's mail host to refuse SMTP sessions that declare a sender domain which itself refuses SMTP from this host? That is, if the SMTP client declares a domain that we can't make SMTP connections back to, then there's not much point accepting the incoming connection in the first place. I'm imagining a late check (after the low-cost checks to winnow most of the rubbish connections) that keeps the client on the other end while it attempts an SMTP client connection back to the declared domain of the sender. If that connection is rejected, the incoming one is also rejected. I'm also open to other suggestions for how this problem might be addressed (short of not using this mail host at all, which isn't an option).

  Read the article

• W2003StdR2 server: DNS dysfunctional!

  - by Tor

  I hate to have to do this, but i feel up that creek with no... well, some of you might know. At the moment my one and only DNS server refuses to do Forwarding. The story is as goes: This site had 2 servers, one W2003SBS and an W2003StdR2. The SBS degraded over a short periode of time, and to not go down with it i decided to move all data over to the other server. This was of course an AD integrated site. Move went ok, the Std server removed from the domain, and the SBS put to rest. For the time being we decided to run the Std as a server only, and no AD. We renamed the internal domain to xxx.local, and set the server up with DNS, DHCP and installed WINS (not activated). Forwarding of DNS is to our ISP through a Netgear Firewall. The same address setup used as before. So - DNS server started and all went ok, clients reconfigured and hooked up and then - after a day's time - internet name resolution stopped working on the server! Nothing had changed, been altered, modified, nothing! What i now get when doing NSLOOKUP is just a 2 sec timeout response! And i have checked and looked, but to no avail. Anybody seen this behaviour before? And yes - ALL servicepacks have been updated on the server. I would be much obliged if anyone in here could lend an ear... and give advice! Thanks.... from Tor in Norway Today is the 14th, and i still have no resolution to this nagging problem. Anybody else got any advice in the matter? Please?

  Read the article

• Preventing endless forwarding with two routers

  - by jarmund

  The network in quesiton looks basically like this: /----Inet1 / H1---[111.0/24]---GW1---[99.0/24] \----GW2-----Inet2 Device explaination H1: Host with IP 192.168.111.47 GW1: Linux box with IPs 192.168.111.1 and 192.168.99.2, as well as its own route to the internet. GW2: Generic wireless router with IP 192.168.99.1 and its own route to the internet. Inet1 & Inet2: Two possible routes to the internet In short: H has more than one possible route to the internet. H is supposed to only access the internet via GW2 when that link is up, so GW1 has some policy based routing special just for H1: ip rule add from 192.168.111.47 table 991 ip route add default via 192.168.99.1 table 991 While this works as long as GW2 has a direct link to the internet, the problem occurs when that link is down. What then happens is that GW2 forwards the packet back to GW1, which again forwards back to GW2, creating an endless loop of TCP-pingpong. The preferred result would be that the packet was just dropped. Is there something that can be done with iptables on GW1 to prevent this? Basically, an iptables-friendly version of "If packet comes from GW2, but originated from H1, drop it" Note1: It is preferable not to change anything on GW2. Note2: H1 needs to be able to talk to both GW1 and GW2, and vice versa, but only GW2 should lead to the internet TLDR; H1 should only be allowed internet access via GW2, but still needs to be able to talk to both GW1 and GW2. EDIT: The interfaces for GW1 are br0.105 for the '99' network, and br0.111 for the '111' network. The sollution may or may not be obnoxiously simple, but i have not been able to produce the proper iptables syntax myself, so help would be most appreciated. PS: This is a follow-up question from this question

  Read the article

• Ubuntu 10.10 - disaster - what other linux for beginner?

  - by A-ha

  Guys, I've tried to install ubuntu (desktop and notebook ed) on my laptop and unortunately I have to say that as despite the fact that installation process supposed to be easy I couldn't finish installation of this system - didn't detect my keyboard or rather lost my keyboard as soon as I tried to switch on/off pad on my laptop. After I've discovered that, I started all over again (this time without touching my laptop's pad during installation) and yes, eventually it get to the end of installation. Unfortunately, when I've tried to switch my pad (sometimes I just do not want to use a mouse) the whole system froze. So I had to restart it with the power button and this time I didn't touch pad at all, plugged in mouse and tried to rearrange taskbars according to my liking (all taskbars on the top side of the screen and auto-hide on) and I gave up. It is so unfinished that I just can't be bothered to use it. I would like to have one linux system on my machine so I started googling and most of the links are to either ubuntu (which I just do not want to touch for now) and suse or commercial versions of linux. I do not really mind paying for something (and having experience with ubuntu I'd rather pay and have something pro then get it free and discover that it's unusable). So could someone please provide short list of linux distros which would be appropriate for a beginner, and I don't mind paying for it, I just want it to be a professional product.

  Read the article

• How can I automatically edit an email before auto-forwarding it?

  - by Miss Cellanie

  Is there a way to automatically edit emails before forwarding them? I'm getting email notifications from Foursquare that I want to send to my phone as text messages. I know how to send messages to my number using an email address (I'm in the US and use Verizon) but I don't know how to strip out any unnecessary formatting, like HTML, before the email gets sent. What I want: Ability to strip out HTML Ability to start forwarding at a specific part of the email based on a search (e.g., I might know that Foursquare starts their messages with "Hey hey!" and only want content after that phrase occurs) Ability to truncate at 160 characters Things I've tried: I'm not using Foursquare DM pings through Twitter because I have two Twitter accounts and Twitter only allows a phone to be linked to one account at a time. I'm not willing to change which account it's linked to. I tried to work around the Twitter limitation using Google Voice, but they don't support SMS short codes. I'll compromise on the features I want if I can find a free solution that doesn't require me to set up my own server. I do think this is computer related because it will happen on my computer, not on my phone. edit My current setup: Gmail in Firefox 3.0.15 on Windows XP. I use a netbook as my only personal computer. However, if the only way to accomplish this well is to set up my own mail server or something, I would still want to know that.

  Read the article

• Win 7 Remote Desktop connection failure when already logged in.

  - by Andy E

  I have a bit of a strange problem, magnified recently by my broadband dropouts. I wasn't sure whether to post this on SU or SF, so I thought I'd start here as more users would be likely to know what the problem is. In short, when I try and connect to my server (Windows Server 2008) from my laptop running Windows 7, I can only connect if my remote account was previously logged out. If I'm still logged in I get the error message: Windows cannot connect to the remote server. No explanation or anything. If my IP address is the same, I don't have this problem. If I boot up Windows XP Mode and run XP's remote desktop connection it works just fine -- I think the difference there is it takes me to the remote server's logon screen. With Win 7 RDC you never see the logon screen, it asks you for credentials before entering full screen mode. The real problem is that I'm having random broadband dropouts and my IP isn't static. If I logon via Win XP RDC, log out and then run Win 7 RDC then it works fine. I realize I can just use Win XP's RDC for now, but I don't really like keeping XP Mode open if I can help it. Does anyone know a way around this problem? Maybe forcing Win 7 RDC to go to the logon screen, or changing some server-side settings to work around the IP address issue?

  Read the article

• How to tell Linux to explicitly swap out main memory of a suspended process?

  - by Vi

  I run a memory-hungry process (mkcromfs) which consumes more memory than I have physical memory on my latop, so it is paging and swappin and thrashing all the time and loadavg is about 2 (compcache is already in use with usual swap partition as well), but slowly moving forward (Although I afraid it will finally try to allocate 2GB and crash draining 2 days of thrashing). When I want to use the laptop for something else, I stop the process, start X server, firefox and other programs. The problem is that when I start Firefox the loadavg jumps to 10 and the system becomes almost unresponsive at all (long time to turn on/off caps lock, slow mouse cursor position updates, slow switching from X server to Linux console, slow login). The stopped mkcromfs still holds a lot of memory (464.8 MiB and slowly falling) and moves it to swap only when more memory is needed for some other program, which results in a great slowdown. How to tell the Linux to swap out this process entirely (e.g. I'm not intending to resume it in short term), possibly waking from swap other data? Also it will be useful to be able to specify the exact swap device to swap the given process out.

  Read the article

• ubuntu's average load never below "0.00 0.01 0.05"

  - by Karma Fusebox

  I have several ubuntu 12.04 VMs running on a ubuntu 12.04 KVM host. Those of the virtual machines that are totally idle with no services (except syslog and the other "small" standard stuff of a fresh installation) show a constant load of "0.00 0.01 0.05" in top/htop as average 1/5/15. When there are "real" applications running, the load averages behave perfectly normal but they never fall below the mentioned values. While this doesn't affect performance at all and could easily be ignored, it screws up the monitoring graphs in a very annoying way: (Notice how load15 behaves nicely if 0.05 for a short time in the right half of the pic) Unfortunately I don't know what diagnostic outputs might be helpful for you, so here's some default stuff: # top top - 16:31:01 up 1:05, 1 user, load average: 0.00, 0.01, 0.05 Tasks: 62 total, 1 running, 61 sleeping, 0 stopped, 0 zombie Cpu(s): 0.2%us, 0.2%sy, 0.0%ni, 99.2%id, 0.5%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 1019464k total, 73452k used, 946012k free, 6140k buffers Swap: 0k total, 0k used, 0k free, 22504k cached . # free -m total used free shared buffers cached Mem: 995 72 923 0 6 21 -/+ buffers/cache: 43 951 Swap: 0 0 0 . # iostat -x /dev/vda Linux 3.2.0-32-virtual (vm3) 11/15/2012 _x86_64_ (2 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 0.25 0.00 0.65 0.20 0.24 98.66 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %util vda 0.14 0.12 0.51 0.22 6.74 1.46 22.50 0.02 23.26 20.64 29.30 7.63 0.56 Need something else? Has anyone ever seen this behavior? Might this be a bug in kvm/ubuntu/kernel 3.x in the end? Thanks a lot!

  Read the article

< Previous Page | 157 158 159 160 161 162 163 164 165 166 167 168  | Next Page >