Search Results

Search found 20188 results on 808 pages for 'wireless network'.

Page 164/808 | < Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >

  • OpenVPN Cloud for Network monitoring

    - by mezgani
    I'm working on a supervision project based on OpenVPN, a good way to send some network traffic through a secure channel to office from there out to the Internet. On office i have an OpenVPN server installed and i need to monitor all branches servers that are behind firewalls. I know that the point to point solution is very easy so we may only install OpenVPN client on node that i need to monitor. In the fact, is there any other issue that could help to supervise all branches DMZ network, without installing the client on each machines.

    Read the article

  • Synergy on macbook with osx mavericks wifi connection

    - by user332956
    I'm trying to set up Synergy with my macbook pro running OS X 10.9.3 as a client and my Windows 7 desktop as a server. I'm having some pretty bad connection problems though when I try to use my mac. Every couple seconds the mouse or the keyboard will stop working entirely then come back. I ran some tests and found that the ping from my desktop to my mac would be very high every third ping or so(1000+ ms) or sometimes even time out. If I ping my desktop from my mac the pings are all reasonably low. I believe that this is a power saving feature of Mavericks and I have found a way to get around it by continually pinging my router on my mac, keeping my wifi card from going to sleep. I'm using this right now to type this up with synergy and have had zero issues. Has anyone else ran into this issue and found a better solution? So far, I think my best bet would be to buy an ethernet adapter but I'd rather not have yet another cable running across my desk.

    Read the article

  • How do i use a USB wifi device properly?

    - by acidzombie24
    I'll just say a few random things One usb wifi device i notice only worked when it plugged into my usb hub Another one worked but couldnt get full speed. It came with an extention cord and when i had it a few feet away i was able to (usually) get full speed I had a wifi card in a tower in the past and just about all laptops have it built in How do i use a USB wifi adapter properly? The first device didnt come with an extention cord and made no mention of bringing it away from the computer. When someone else tested the device he said he was getting full speed while it was plugged into his tower so i was pretty surpised. How do i use USB wifi devices properly?

    Read the article

  • Linux Transparent Bridge for Network

    - by Blackninja543
    I am attempting to set up a semi-transparent bridge. I say semi because I want it to act as a transparent tap for all traffic moving through both sides of the bridge. What I also want is to have the "green zone" accessible to a web interface for the bridge that will display all results of the IDS and other network monitoring tools. My example would be as such: eth0 <--> bridge(br0) <--> eth1 The entire network would be on the same subset however anything coming from eth0 to eth1 would be accepted. The only time anything would be drop is if the eth0 attempted to access br0. If someone attempts to access the web interface on br0 through eth1 it will succeed. My biggest problem I feel is if I attempt to block anything from eth0 to br0 this will drop the bridge all together.

    Read the article

  • tomato firmware unstable when I am connected to Chromecast

    - by Graviton
    I have an Asus RT-N12D1, and I installed the tomato firmware by shibby ( version tomato-K26-1.28.RT-N5x-MIPSR2-112-Max.trx). However I found that the connection can be really unstable. Whenever I stream youtube videos on TV via Chromecast ( I tried both the cast from iPad and Win7, both can reproduce the problem), the router will frequently restart itself, leading to a loss of connection and subsequent reconnection. I want to get this problem fixed, but I don't know how. Is there anyway where I can troubleshoot what is the real problem, or is there anyway I can collect enough log information so that I can then present to the original developer for a fix ( maybe)?

    Read the article

  • Stack-based keyboard delay using Logitech MX3100 keyboard

    - by Mark S. Rasmussen
    I've been using a Logitech Cordless Desktop MX3100 keyboard for quite a while. I've never really had any problems, except for the occasional typo. I noticed however that I tended make the typo "Laod" instead of "Load", quite a bit more often than any other typos. As it started to get on my nerves, I decided to do some testing. What I found out was than when I write lowercase "load", I'd never make the typo. All uppercase, or just uppercase L, I'd make the typo quite often. My actual (very scientific) testing is probably best described by showing the output: moatmoatmoat MoatMoatMoat loatloatloat LaotLaotLaot loafloafloaf LaofLaofLaof hoathoathoat HoatHoatHoat hoadhoadhoad HoadHoadHoad lortlortlort LrotLrotLrot What i found out was that whenever shift was depressed, typing an uppercase "L" would induce a significant lag if the next character was an "o", compared to the lag of the any other key: High "o" lag: LoLoLoLoLoLo No "a" lag: LaLaLaLaLaLa No lag for neither "o" nor "a": lolololololo lalalalalala By realizing this I regained a slight bit of sanity as I knew I wasn't coming down with a case of Parkinsons. I was actually typing correctly, the lag just interpreted it wrongly. Now, what really bugs me is that I can't fathom how this is occurring. What I'm actually typing, in physical order, is this: L - o - a - d, and yet, the "a" is output before the "o", even though "o" was pressed before "a". So while the keyboard is processing the "Lo" combo, the "a" gets prioritized and is inserted before the "o" is done processing, resulting in Laod instead of Load. And this only happens when typing "Lo", not when typing lowercase "lo". This problem could stem from the keyboard hardware, the receiver hardware or the keyboard software driver. No matter the fault location however, I can't imagine how this could be implemented as anything but a FIFO queue. A general delay, sure, I could live with that, albeit I'd be irritated. But a lag affecting different keys differently, and even resulting in unpredictable outcome - that just doesn't make any sense. I've solved the problem by just switching to a wired keyboard. I just can't shake it off me though; what kind of bug/error/scenario would result in a case like this? Edit: It's been suggested that I stop drinking Red Bull and stick to water instead. While that may actually help solve the issue, I'm really not looking for a solution as such. I'm more interested in an explanation of how this could happen, as I can't imagine any viable technical solution that could result in this behavior.

    Read the article

  • VB6 network errors Windows 2008 run on ESX VMWare

    - by hivedome
    We have an application built in vb6, the executables for the application are run locally on a Windows 2008 Terminal Server the dll's for the application are located on a network share. Intermittently parts of the application crash with inpage errors.. we realise the .dll it references then copy that dll locally to the windows 2008 server and register the application can then run again alternatly we reboot the server and all ok. ideally we do not want the exec's or dll's on local server, they should be located on network share for other Terminal Servers to access. error values we receive are C0000203 C00000C4 I have disabled windows 2008 UAC and DEP.. Has anyone experienced this type of behaviour in 2008?

    Read the article

  • Network wide rule to forwared IP address

    - by Patrick
    Hi, we have a virtual machine which hosts a web based bug tracker in our network which is reached internally via e.g. 192.168.1.5:9800. From the outside we made a port forwarding in our firewall so that the web site can be reached via e.g. 72.10.10.10:9800. Now that works fine but the problem is that we got different IP addresses to reach the same service depending if we are in the office or at home and when the service sends out an email the link doesn't always work :) So we are looking for a solution to fix it. One could be to make a rule in out firewall that all communication to 72.10.10.10:9800 is forwarded to 192.168.1.5:9800... If that's possible that is considering it's an IP address + a port. The reason we used a port is because we only got one static public IP address but multiple virtual web appliances. Thanks for any suggestions or solutions :) Patrick PS: The network is a Win 2008 R2 domain by the way

    Read the article

  • wrt54gl reboots; troubleshooting steps?

    - by Bill
    I am using about 10 wrt54gl's in a small school. I am using a combination of stock firmware and Tomato 1.25, slowly moving towards all Tomato. We have had these devices installed for several years without problems. Recently, more and more of the units have started to spontaneously reboot, usually during high-traffic times (but not always). For the most part, the rebooting is not critical for us, but the wrt54gl's temporarily revert to 192.168.1.1 on the LAN ethernet ports and conflict with a critical server that's already installed with that IP. (Yes -- we plan to move the server off that address, but it is an involved process.) Both Tomato and the stock firmware (several versions from recent to several years old) exhibit the same problem: random reboots and reverting to 192.168.1.1 and conflicting temporarily with our server until the firmware boot process finishes. Here are my questions: Any way to prevent the wrt54gl's from reverting to 192.168.1.1 during the boot process? I was thinking of doing a custom firmware mod, although I hate to go that direction. Any steps to take in troubleshooting the reboots? Only some of the wrt54gl's reboot, which is odd. Others stay online for weeks and months without issues. Thanks.

    Read the article

  • Booting off windows image through network

    - by Mr. Sir King Osman
    I have a HP st5742, which is a tower that does not have a hard drive and I am trying to boot it off the network, preferably off an image. It was designed along with the program HP Image Manager, however this program has been discontinued by HP and I can not seem to find a way to get a copy. If this helps, I am running my network with windows server 2008 R2 and would like the streaming client to be running windows. I have spent days searching for a way to deploy this machine however I can not seem to find a straight forward program, guide, or way to do this. I am new to this sort of thing but I willing to reading into the subject, all I need is a point in the right direction. Any help would be greatly appreciated.

    Read the article

  • Accessing guests on virtual network when connected to host via PPTP

    - by Viktor Elofsson
    I'm setting up a development machine which runs Ubuntu 12.04 and KVM for virtualization. I have a guest running Ubuntu 12.04 which can be accessed from the host via its IP address which is assigned by libvirt. The guest can also access the internet, no problem there. However, now I want to setup PPTP so I can connect to the host (from my workstation running Windows 7) and directly access guests without relying on SSH port forwarding. I can connect from my W7-machine to the host (PPTP), but I cannot access any virtual machines (which are accessable from the host directly). Relevant configuration files cat /etc/network/interfaces auto lo iface lo inet loopback # device: eth0 auto eth0 iface eth0 inet static address x.x.x.x broadcast x.x.x.x netmask x.x.x.x gateway x.x.x.x # default route to access subnet up route add -net x.x.x.x netmask x.x.x.x gw x.x.x.x eth0 virsh net-edit default <network> <name>default</name> <uuid>xxxxxxxx-72ce-3c20-af0f-d3a010f1bef0</uuid> <forward mode='nat'/> <bridge name='virbr0' stp='on' delay='0' /> <mac address='52:54:00:xx:xx:xx'/> <ip address='192.168.122.1' netmask='255.255.255.0'> <dhcp> <range start='192.168.122.2' end='192.168.122.254' /> <host mac='52:54:00:yy:yy:yy' name='web1' ip='192.168.122.11' /> </dhcp> </ip> </network> cat /etc/pptpd.conf (commented lines removed) # TAG: option # Specifies the location of the PPP options file. # By default PPP looks in '/etc/ppp/options' # option /etc/ppp/pptpd-options # TAG: logwtmp # Use wtmp(5) to record client connections and disconnections. # logwtmp #(Recommended) localip 192.168.122.1 remoteip 192.168.122.234-238,192.168.122.245 cat /etc/ppp/chap-secrets* # Secrets for authentication using CHAP # client server secret IP addresses xxxxx * yyyyyyyyyy 192.168.122.100 I get the correct IP address when connecting my W7-machine, but when I try to ping the virtual machine at 192.168.122.11 I get Reply from 192.168.122.1: Destination port unreachable. It's probably something trivial I'm missing but I can't for the life of me figure out what it is. So I'm turning to you, serverfault.

    Read the article

  • No External Network Access Through Ubuntu VPN

    - by trobrock
    I have setup pptpd as my VPN server on Ubuntu Server 9.04, I am able to connect to the VPN from the client and can access the server's local network, but I am unable to connect to the external network via the VPN. If I login to the server via SSH: $ ping google.com PING google.com (74.125.67.100) 56(84) bytes of data. 64 bytes from gw-in-f100.google.com (74.125.67.100): icmp_seq=1 ttl=49 time=65.9 ms 64 bytes from gw-in-f100.google.com (74.125.67.100): icmp_seq=2 ttl=49 time=63.2 ms 64 bytes from gw-in-f100.google.com (74.125.67.100): icmp_seq=3 ttl=49 time=63.9 ms 64 bytes from gw-in-f100.google.com (74.125.67.100): icmp_seq=4 ttl=49 time=66.0 ms If I connect to the VPN and ping locally: $ ping google.com ping: cannot resolve google.com: Unknown host I have a feeling it is some routing issue on the server but I am unsure.

    Read the article

  • VPN Network intermittantly fails to provide internet: What could be possible causes

    - by Jake M
    We have a small office with our own VPN setup. We occasionally experience failures in our internet connection where we cannot access the internet. Most of the time the internet connection will resume by itself(without me doing anything) after a period of time(10 mins). Would you be able to suggest possible causes of the connection failure so I can then go and run some tests? Our network architecture is like so: A 'Billion' brand router that is connected to the internet via phone cable and then connected to our Cisco Switch A Cisco Switch/Bus which is connected to all our office nodes, our external harddrive and also to our router as stated above. All connections are via ethernet cable A series of work computers(nodes) connected via ethernet cable to the Cisco switch. Our ISP is TPG Australia We have a Virtual Private Network All the ethernet cables are about 3 years old Do you think that the causes of our intermittant connection problems could be due to the following: Data collisions in the ethernet cables Old/Faulty ethernet cables Our ISP has bad service Can you think of any other causes of the problem?

    Read the article

  • Process for configuring network settings on a headless rack mount device

    - by PherricOxide
    I'm with a small company that plans to sell a rack mounted network appliance which is configurable via a web interface (think of a router configuration page sort of deal), and I'm wondering in large data center like environments what the process usually is for the initial setup of such systems. The main question is, if the system is headless, how do you get initial remote access to it? Do companies usually first plug a server into a monitor/keyboard/mouse in order to configure the network settings before mounting it in a rack? How else would they know what the IP address of the machine was if DHCP (and it can't be hard coded because of IP conflict potential)?

    Read the article

  • I need access control within the same network/VLAN

    - by Sadiq ali
    Hi, I have a single network/VLAN and I want to block some traffic and allow some traffic in my network, is this possible using a L2 or L3 switch? If so which switches support this feature and what would be the commands to configure this? I have already tried this using access lists by applying it to an ethernet port but if I apply it on one port it will automatically work on incoming traffic on that port but I mean it to work on only outgoing traffic as per my ACL. Do you have any suggestions please?

    Read the article

  • Probability of failure with larger number of network elements

    - by MikeKulls
    I'm having a discussion with a work colleague. I'm saying that a network with 100 elements will have pretty much 10 times as many failures as a network with 10 elements, ie a tech will need to replace faulty hardware 10 times more often. He suggests that the failure rate doesn't go up in a linear fashion and the failure rate will be significantly less than 10x, in fact only slightly more failures. This is not the probability of an outage etc, we are just talking in relation to the amount of parts that a tech would need to swap out in a given time frame.

    Read the article

  • Debian Lenny - network interfaces(eth) are in DOWN state

    - by pachanga
    Folks, I'm facing a very weird problem with one of my production servers(it's Debian Lenny) - after reboot network interfaces(eth0,eth1) are in DOWN state. Looks like an Intel based networking adapter is installed on the server, lspci lists it as follows: Ethernet controller: Intel Corporation Device 10c9 (rev 01) The kernel driver responsible for this adapter is "igb". I tried "modprobe -r igb && modprobe igb", network interfaces first disappear then appear, but they are in DOWN state again. What could go wrong? It used to be working just fine. How can this be fixed?

    Read the article

  • Unable to connect to FTP server using Filezilla with router in-between

    - by pkswatch
    While connecting to my web server using filezilla, i am getting this error: Status: Resolving address of ftp.mysite.org.in Status: Connecting to 199.199.199.18:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 1 of 150 allowed. Response: 220-Local time is now 17:58. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 5 minutes of inactivity. Command: AUTH TLS Response: 234 AUTH TLS OK. Status: Initializing TLS... Error: GnuTLS error -9: A TLS packet with unexpected length was received. Status: Server did not properly shut down TLS connection Error: Could not connect to server I use a cradlepoint CTR35 wifi router to connect to the wired internet connection. When i connect to the same server without this router, the connection works flawlessly. So i guess there is some problem with my router firewall settings, but i dont know what! Can somebody help me out please? Note: The server requires EXPLICIT FTP OVER TLS and does not work with plain FTP sessions. And i can connect to other servers using plain FTP with the router in between.

    Read the article

  • Suspected Router problems, [closed]

    - by jordon_user
    I am new to this forum. I appreciate any help you can offer. I have been troubleshooting an error with both my WIRED Internet Connection I have 3 desktops running through this working connection (Router) with no problems. Two computers, one laptop and desktop experience the issue. If I connect directly to the Modem, on either, no problem on the internet. Through the Router, my computer connects for a period of time but if ever awaking my comp, or restarting, the yellow explanation mark returns. The only way I can get the connection up = cmd. ipconfig /release, ipconfig /renew. This constant command is annoying and was hoping for a permanent fix. Audio is also not working. I know its likely a driver error, but its an old comp we put together and if there's an easy fix itd be great to hear from you! If you need any more info just let me know. Thanks! THanks guys!

    Read the article

  • Can a virtual mikrotik box bridge a hyper-v internal network with a hyper-v external network?

    - by mcfrosty
    I am trying to set up a Mikrotik router as a transparent firewall on my network. I got the machine working on a hardware MT box, but my boss wants the MT virtualized. I have been trying the set up where my virtual windows box talks to the Mikrotik via private or internal network on the Hyper-V host. I can get the two machines to talk, but as soon as I set up a bridge on the MT, all traffic ceases between the two. Is it possible to create a bridge for this purpose (having the MT silently in front of my firewalled server)? I could really use some help.

    Read the article

  • SQLServer 2008 Fails to start under NT AUTHORITY/NETWORK SERVICE account

    - by braincells2pixels
    Not sure what changed but looks like my security credentials have been monkeyed with. Since yesterday evening after I disconnected from our corporate network and rebooted my laptop at home, I am unable to start the instance of SQL2K8. The service is set to run under NT AUTHORITY\NETWORK SERVICE account. The event log records an Access Denied error on the Master.mdf. Switching the account to Local System starts the service but our application runs into security errors. Any clues? TIA

    Read the article

  • vCenter Server: This host currently has no management network redundancy

    - by goober
    Background I'm on a new VMWare install consisting of: 1 vCenter Server (containing inventory service, SSO, vCenter server, and web client server) 2 ESX Servers configured in a HA group Problem When a I view the summary for any one of my servers, I receive a notice: "" This is expected in our scenario and we're okay with it. Attempted Solutions As I understand from this article and this discussion, the proper way to remove the error message is to ignore it via setting the "das.ignoreRedundantNetWarning" propery to "true". I took the following steps: Logged into vCenter Right-clicked on my HA cluster and chose "Edit Settings..." Clicked "vSphere HA" section Clicked "Advanced Options..." Added the "das.ignoreRedundantNetWarning" option with a value of "true". Question How do I get this error to go away, and are there any reasons why adding this option may not have worked? References Network redundancy message when configuring VMware High Availability in vCenter Server [VMWare KnowledgeBase] How remove a notice " has no management network redundant" [VMWare Community]

    Read the article

  • Connecting a Mac to the office network

    - by user36501
    Hi All, I am busy preparing to start working with a Mac at work - in addition to my old PC. Just wondered, is it difficult to setup the Mac to run on the office network - i.e. does it need any special settings or servers or anything like that? and also printers...can I use the network printer as normal. I am just pottrying to think ahead of any ential issues. Also share drives...will I be able to access share drives and my backups to these shares drives - all a bit daunting! Btw in case you didn't notice I am a Mac Nube lol

    Read the article

< Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >