Search Results

Search found 19557 results on 783 pages for 'networking programming'.

Page 166/783 | < Previous Page | 162 163 164 165 166 167 168 169 170 171 172 173  | Next Page >

• Redundant OpenVPN connections with advanced Linux routing over an unreliable network

  - by konrad

  I am currently living in a country that blocks many websites and has unreliable network connections to the outside world. I have two OpenVPN endpoints (say: vpn1 and vpn2) on Linux servers that I use to circumvent the firewall. I have full access to these servers. This works quite well, except for the high package loss on my VPN connections. This packet loss varies between 1% and 30% depending on time and seems to have a low correlation, most of the time it seems random. I am thinking about setting up a home router (also on Linux) that maintains OpenVPN connections to both endpoints and sends all packets twice, to both endpoints. vpn2 would send all packets from home to vpn1. Return trafic would be send both directly from vpn1 to home, and also through vpn2. +------------+ | home | +------------+ | | | OpenVPN | | links | | | ~~~~~~~~~~~~~~~~~~ unreliable connection | | +----------+ +----------+ | vpn1 |---| vpn2 | +----------+ +----------+ | +------------+ | HTTP proxy | +------------+ | (internet) For clarity: all packets between home and the HTTP proxy will be duplicated and sent over different paths, to increase the chances one of them will arrive. If both arrive, the first second one can be silently discarded. Bandwidth usage is not an issue, both on the home side and endpoint side. vpn1 and vpn2 are close to each other (3ms ping) and have a reliable connection. Any pointers on how this could be achieved using the advanced routing policies available in Linux?

  Read the article

• How do I send traffic to specific IP addresses through VPN and others directly to the internet?

  - by keithwarren7

  I am running Windows 7 and using the Cisco VPN adapter to connect to a private network where I access resources starting with the IP address 172.. My problem is that when connected to the VPN all external traffic is routed through the VPN. I want to set things up so only certain IP addresses go through the VPN and everything else goes out over the local adapter and out to the internet as normal. How?

  Read the article

• lxc bandwidth control using tc

  - by kumar

  I am trying to restrict bandwidth inside my containers. I have tried using the following commands , But I think it is not getting effective. cd /sys/fs/cgroup/net_cls/ echo 0x1001 > A/net_cls.classid # 10:1 echo 0x1002 > B/net_cls.classid # 10:2 tc qdisc add dev eth0 root \ handle 10: htb tc class add dev eth0 parent 10: \ classid 10:1 htb rate 40mbit tc class add dev eth0 parent 10: \ classid 10:2 htb rate 30mbit tc filter add dev eth0 parent 10: \ protocol ip prio 10 \ handle 1: cgroup Here A and B are containers created with this command. lxc-execute -n A -f configfile /bin/bash lxc-execute -n B -f configfile /bin/bash Whereas configfile contains only this entry: lxc.utsname = test_lxc AFter starting the container , I have started vsftpd inside container A and try to access the files using the ftp client from another machine. Then I killed vsftpd in container A and started vsftpd in container B and try to access the files using ftp client from another machine. I cannot observe any difference in performance, for that matter it is nowhere nearer to 40mbit/30mbit. Please correct me whether anything wrong here.

  Read the article

• How to eliminate the downtime when a dynamic IP address changes?

  - by xenon

  We currently have a number of client computers linked up to a database server (MS SQL 2008) for replication. The database server recognises the computers based on their Windows hostname. We are using dynamic IP addresses at this time because we tend to change the computers’ hardware quite frequently, and so the MAC address may be different. Unless static IP has a good way for us to manage frequent changing of MAC addresses, we are keeping it to dynamic IP. The problem with dynamic IP addresses, however, is that when a client fetches an new IP from the DHCP, ie, there is a change in the IP address, there is going to have a downtime for the hostname to reflect the new IP address, the client’s DNS cache of the hostname to reload, and also the server’s DNS cache to reload to see the new IP from the hostname. All of these have different timings and the delay can be really bad at times. Restarting the computer doesn't work all the time too. The clients are on Windows 7. How can I eliminate the amount of downtime required when there is a change in IP in the case of dynamic IP addresses?

  Read the article

• Rapidly changing public IP addresses on certain networks?

  - by zenblender

  I run/develop an online game where many of our users are in southeast asia. I recently went to southeast asia and made an alarming discovery. Anywhere I got internet access, whether it was via 3G, a LAN in a hotel, or wifi in a cafe, both in Singapore and the Philippines, I noticed that my IP address was changing CONSTANTLY. I mean the public IP address, not the private one. I could load a page like whatismyip.com and just hit reload and see a new IP address show up every 5-10 seconds! This has lots of consequences for my online game, as many things "break" if the IP address changes for a given user. Basically, I would like to know more about this. Is there a name for the kind of network or router or paradigm that causes this, so I can read up on it? I don't understand WHY a network would function this way. Does it do this on purpose? Is it for security reasons? Is it to anonymize and protect the identity of the users? Or is it just an "old" method that is mostly obsolete in the rest of the world? Thanks for any info that will help me to understand.

  Read the article

• What speed are Wi-Fi management and control frames sent at?

  - by Bryce Thomas

  There are a bunch of different 802.11 Wi-Fi standards, e.g. 802.11a, 802.11b, 802.11g, 802.11n etc. that all support different speeds. Wi-Fi frames are generally categorised as one of the following: Data frames - carry the actual application data Control frames - coordinate when its safe to send/reduce collisions Management frames - handle connection discovery/setup/tear down (e.g. AP discovery, association, disassociation) My question is about whether all these frames, and specifically management frames, are transmitted at the fastest supported speed available, or whether certain classes of frames are transmitted at some lowest common denominator speed. I have noticed that when I put an 802.11b/g only device into monitor mode and capture traffic over the air, I still see management frames (e.g. association/disassociation) being transmitted between my phone and AP which are both 802.11n, even though 802.11n has a higher transfer rate. So I am imagining one of two possibilities: My 802.11n phone/AP had to negotiate a slower speed for some reason and that's why I can see their frames on my 802.11b/g monitoring device. Management frames (and perhaps control frames also?) are sent at a lower speed, and it's only data frames that are transmitted faster with newer 802.11 standards. The reason I would like to know which one of these two possibilities (or perhaps a third possibility) is the case is that I want to capture management frames, and need to know whether using an 802.11b/g card is going to lead to me missing some frames sent at higher speeds than the monitoring card can observe. If management frames are indeed sent at a slower rate, then it's all good. If I just happen to be seeing the management frames because my phone/AP have negotiated a slower rate though, then I need to reconsider what card I use for packet capture.

  Read the article

• default gateway of a host

  - by varun

  if my understanding is correct, the following is what happens when a host A wants to communicate with a machine X outside its network. 1) The host ,checks it routing table to find out if there is any direct routes to the machine. 2) It finds out that the machine is outside its network and has to sent the packets to the default gateway(router) R. 3) The host sents an ARP broadcast to get the mac of the router R. 4) After getting the MAC, the host creates a packet with src IP and MAC as that of the host A, dest IP of the remote machine X and dest MAC of the router R. 5)The router R receives the packet, either drops its or sents its to its next hope, which can be another router or the remote machine X itself. Can anyone explain, how the steps would be, if i set the default gateway of the host A as host A itself...?

  Read the article

• Network login brings in user environment to any machine

  - by Jon Wilson

  In this article about Sun, the author talks about how using a Sun network meant that you could log onto any computer on a network and all of your personal tools and settings would be there. Is it possible to set up something like that with a Windows network? How about Linux?

  Read the article

• Does using a single cable to connect two switches create a bottleneck?

  - by Nick

  I realise this may be a stupid question for some, but it's something I've always wondered about. Let's say we have two gigabit switches and all of the devices on the network are also gigabit. If 10 computers connected to switch A need to transfer large amounts of data to a server on Switch B (at the same time), is the maximum transfer speed of each connection limited by the bandwidth of the connection between the two switches? In other words, would each computer only be able to transfer at a speed of one gigabit divided by the 10 machines trying to use the "bridge" between switches? If so, are there any workarounds so that every device can use it's maximum speed from point to point?

  Read the article

• Windows 7 Can't Connect to Network Drive on Windows XP

  - by Alex Yan

  I have a Windows XP desktop and a Windows 7 laptop both connected to a TrendNET TEW-432BRP router, which is connected to the Internet. They both have static IPs. The desktop has an external hard drive connected to it. The laptop is wireless and the desktop is wired. I enabled sharing on the external hard drive about two years ago when I bought it. I mapped it as a network drive on the laptop. I think it was yesterday, the laptop just stopped recognizing any of the computers on my network (When I open network, my laptop's the only one on it). I also get an error message "An error occurred while connecting A: to \CERTIFIED-DATA\Expansion Microsoft Windows Network: The network path was not found. The connection has not been restored" when I try to connect to the network drive. Both computers run Avast, and there hasn't been any problems with it. This has happened before but I never figured out why and how to fix it. It's usually fixed when I reinstall the OS of the affected system. Edit: I can't navigate the computer using \\CERTIFIED-DATA. I get a message saying "Windows cannot access \CERTIFIED-DATA. Check the spelling of the name, Otherwise, there might be a problem with your network" I clicked diagnose on the message and it failed to find anything wrong I clicked diagnose on my wireless connection, and it just keeps trying to check if something is wrong with the connection I can ping it successfully

  Read the article

• Losing WLAN connections but maintaining internet connections on WIndows 7 Workgroup

  - by Di

  I have 4 computers all running Windows 7 networked in a Work group through Billion 7404vgp-m wireless router.All drivers and firmware for wireless adapters and router are up to date. Windows Firewall and Defender disabled.Disconnected ipv6. Running Nod 32 anti virus software. All have own static IP address 192.XXX.X.XXX. When I Reset the router all computers have Internet and LAN access for about 1 hour and then they will lose the LAN connection but maintain Internet connection. Resetting wireless adapters or restarting computers does nothing to fix this but resetting router will. What is causing this and how do I fix it. Thanks Di

  Read the article

• How can I use Windows Firewall to only permit the Windows Update service to make an outbound connection?

  - by microsmash

  I'm trying to tailor my Windows Firewall settings (using the Windows Firewall with Advanced Security console) to only permit programs that need to access the Internet with an outbound connection to do so. This works fine for normal applications as I can just allow the program, but services that load in the svchost.exe process are a problem. The only services I actually need to give access to are Windows Update and the Background Intelligent Transfer Service (and even that, I would only like Windows Update to be able to submit jobs to, but that's another issue.) Is there a method to only allow these to be permitted an outbound connection, and not any of the other services loaded in svchost?

  Read the article

• Millions of SYN_RECV connections, no DDoS

  - by ThomK

  We have such server structure: reverse proxy (nginx) - worker (uwsgi) - postgresql / memcached. All servers are in local network behind router, with NATed external ip:ports (http/s 80/443 to proxy, and ssh 22 to all servers). Problem is, that sometimes proxy server netstat reports MILLIONS of SYN_RECV connections. From same IP / same ports. Like that: nginx ~ # netstat -n | grep 83.238.153.195 tcp 0 0 192.168.1.1:80 83.238.153.195:3107 SYN_RECV tcp 0 0 192.168.1.1:80 83.238.153.195:3107 SYN_RECV tcp 0 0 192.168.1.1:80 83.238.153.195:3107 SYN_RECV tcp 0 0 192.168.1.1:80 83.238.153.195:3107 SYN_RECV tcp 0 0 192.168.1.1:80 83.238.153.195:3107 SYN_RECV tcp 0 0 192.168.1.1:80 83.238.153.195:3107 SYN_RECV tcp 0 0 192.168.1.1:80 83.238.153.195:3107 SYN_RECV tcp 0 0 192.168.1.1:80 83.238.153.195:3107 SYN_RECV tcp 0 0 192.168.1.1:80 83.238.153.195:3107 SYN_RECV tcp 0 0 192.168.1.1:80 83.238.153.195:3107 SYN_RECV [...] And this is not DDoS, because all IPs affected belongs to our website users. On side note, users says that it's not affecting them. Website is online and working, but... that particular one (from example above) told me that website is down and Firefox can't connect. I've done tcpdump. 19:42:14.826011 IP 83.238.153.195.zephyr-srv > 192.168.1.1.http: Flags [S], seq 1845850583, win 65535, options [mss 1412,nop,wscale 0,nop,nop,sackOK], length 0 19:42:14.826042 IP 192.168.1.1.http > 83.238.153.195.zephyr-srv: Flags [S.], seq 2835837547, ack 1845850584, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:42:17.887331 IP 83.238.153.195.zephyr-srv > 192.168.1.1.http: Flags [S], seq 1845850583, win 65535, options [mss 1412,nop,wscale 0,nop,nop,sackOK], length 0 19:42:17.887343 IP 192.168.1.1.http > 83.238.153.195.zephyr-srv: Flags [S.], seq 2835837547, ack 1845850584, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:42:19.065497 IP 192.168.1.1.http > 83.238.153.195.zephyr-srv: Flags [S.], seq 2835837547, ack 1845850584, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:42:23.918064 IP 83.238.153.195.zephyr-srv > 192.168.1.1.http: Flags [S], seq 1845850583, win 65535, options [mss 1412,nop,wscale 0,nop,nop,sackOK], length 0 19:42:23.918076 IP 192.168.1.1.http > 83.238.153.195.zephyr-srv: Flags [S.], seq 2835837547, ack 1845850584, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:42:25.265499 IP 192.168.1.1.http > 83.238.153.195.zephyr-srv: Flags [S.], seq 2835837547, ack 1845850584, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:42:37.265501 IP 192.168.1.1.http > 83.238.153.195.zephyr-srv: Flags [S.], seq 2835837547, ack 1845850584, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:42:37.758051 IP 83.238.153.195.2107 > 192.168.1.1.http: Flags [S], seq 564208067, win 65535, options [mss 1412,nop,wscale 0,nop,nop,sackOK], length 0 19:42:37.758069 IP 192.168.1.1.http > 83.238.153.195.2107: Flags [S.], seq 3188568660, ack 564208068, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:42:40.714360 IP 83.238.153.195.2107 > 192.168.1.1.http: Flags [S], seq 564208067, win 65535, options [mss 1412,nop,wscale 0,nop,nop,sackOK], length 0 19:42:40.714374 IP 192.168.1.1.http > 83.238.153.195.2107: Flags [S.], seq 3188568660, ack 564208068, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:42:41.665503 IP 192.168.1.1.http > 83.238.153.195.2107: Flags [S.], seq 3188568660, ack 564208068, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:42:46.751073 IP 83.238.153.195.2107 > 192.168.1.1.http: Flags [S], seq 564208067, win 65535, options [mss 1412,nop,wscale 0,nop,nop,sackOK], length 0 19:42:46.751087 IP 192.168.1.1.http > 83.238.153.195.2107: Flags [S.], seq 3188568660, ack 564208068, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:42:47.665498 IP 192.168.1.1.http > 83.238.153.195.2107: Flags [S.], seq 3188568660, ack 564208068, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:42:59.865499 IP 192.168.1.1.http > 83.238.153.195.2107: Flags [S.], seq 3188568660, ack 564208068, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:01.265500 IP 192.168.1.1.http > 83.238.153.195.zephyr-srv: Flags [S.], seq 2835837547, ack 1845850584, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:13.320382 IP 83.238.153.195.2114 > 192.168.1.1.http: Flags [S], seq 2136055006, win 65535, options [mss 1412,nop,wscale 0,nop,nop,sackOK], length 0 19:43:13.320399 IP 192.168.1.1.http > 83.238.153.195.2114: Flags [S.], seq 3754336171, ack 2136055007, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:16.320556 IP 83.238.153.195.2114 > 192.168.1.1.http: Flags [S], seq 2136055006, win 65535, options [mss 1412,nop,wscale 0,nop,nop,sackOK], length 0 19:43:16.320569 IP 192.168.1.1.http > 83.238.153.195.2114: Flags [S.], seq 3754336171, ack 2136055007, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:17.665498 IP 192.168.1.1.http > 83.238.153.195.2114: Flags [S.], seq 3754336171, ack 2136055007, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:22.250069 IP 83.238.153.195.2114 > 192.168.1.1.http: Flags [S], seq 2136055006, win 65535, options [mss 1412,nop,wscale 0,nop,nop,sackOK], length 0 19:43:22.250080 IP 192.168.1.1.http > 83.238.153.195.2114: Flags [S.], seq 3754336171, ack 2136055007, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:23.665500 IP 192.168.1.1.http > 83.238.153.195.2114: Flags [S.], seq 3754336171, ack 2136055007, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:23.865501 IP 192.168.1.1.http > 83.238.153.195.2107: Flags [S.], seq 3188568660, ack 564208068, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:35.665498 IP 192.168.1.1.http > 83.238.153.195.2114: Flags [S.], seq 3754336171, ack 2136055007, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:37.903038 IP 83.238.153.195.2213 > 192.168.1.1.http: Flags [S], seq 2918118729, win 65535, options [mss 1412,nop,wscale 0,nop,nop,sackOK], length 0 19:43:37.903054 IP 192.168.1.1.http > 83.238.153.195.2213: Flags [S.], seq 4145523337, ack 2918118730, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:40.772899 IP 83.238.153.195.2213 > 192.168.1.1.http: Flags [S], seq 2918118729, win 65535, options [mss 1412,nop,wscale 0,nop,nop,sackOK], length 0 19:43:40.772912 IP 192.168.1.1.http > 83.238.153.195.2213: Flags [S.], seq 4145523337, ack 2918118730, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:41.865500 IP 192.168.1.1.http > 83.238.153.195.2213: Flags [S.], seq 4145523337, ack 2918118730, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:46.793057 IP 83.238.153.195.2213 > 192.168.1.1.http: Flags [S], seq 2918118729, win 65535, options [mss 1412,nop,wscale 0,nop,nop,sackOK], length 0 19:43:46.793069 IP 192.168.1.1.http > 83.238.153.195.2213: Flags [S.], seq 4145523337, ack 2918118730, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:47.865500 IP 192.168.1.1.http > 83.238.153.195.2213: Flags [S.], seq 4145523337, ack 2918118730, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:49.465503 IP 192.168.1.1.http > 83.238.153.195.zephyr-srv: Flags [S.], seq 2835837547, ack 1845850584, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 Anyone have some thoughts on that?

  Read the article

• What could cause a huge packet loss in Ubuntu 9.10, for both wired and wireless?

  - by xzenox

  I was previously using 9.04 fine (and in fact, I am posting this from my old 9.04 live cd). I tested the following install steps in a virtualbox vm prior to following the sames ones to upgrade my laptop: Download/burn ubuntu minimal cd (12mb one) Install ubuntu minimal sudo apt-get update sudo apt-get upgrade sudo apt-get ubuntu-desktop ubuntu-standard In the VM worked fine and I found myself with a working 9.10 ubuntu, network worked fine and I was able to test my backups and DropBox without a hitch (host was 9.04). When I followed the same steps on my laptop, everything worked up to after 9.10 being installed and working. As far as I can tell, everything besides eth0/wireless works. For some reason, I am unable to access the internet. Ping reports that over 99% of packets get lost (over an hour or so of pinging). This means for example that if I try hard enough, I can load a webpage but only at the cost of much patience... This happens both for a wired and wireless connection to my wrt310n (updated with latest firmware). At first I thought that it could be related to the ipv6 issues ppl have been experiencing however even after disabling ipv6 at the kernel level (through grub), I still get the issue. I do not think this is related to DNS issues or the likes since even when I ping my ISP's gateway IP, I have the same amount of packet loss. No DNS resolving should be required there. Access to my router works peachy with no packet loss there. I've tried different MTU values but to no avail. Note that this issue affects every web-enabled application: firefox, ping, synaptic, etc. The same hardware/router combo works with 9.04 but not with 9.10. In fact, when I did: sudo apt-get ubuntu-desktop ubuntu-standard after 9.10 minimal was installed, it downloaded over 400mb of packages without a hitch so my guess is that one of those packages either in ubuntu-desktop or ubuntu-standard is causing havok. Thoughts?

  Read the article

• Providing reverse records for records that map to ISP IP

  - by thejartender

  I have been instructed to use my ISP ip (as a temporary fix for mapping my name server and domain records as my router dishes out rfc 1918 adresses to devices in my network where I am running an Ubuntu server, my router and my development laptop andso I have fixed: $TTL 3H @ IN SOA ns.thejarbar.org. email. ( 13112012 28800 3600 604800 38400 ); thejarbar.org. IN A 10.0.0.42 @ IN NS ns.thejarbar.org. yuccalaptop IN A 10.0.0.19 ns IN A 10.0.0.42 gw IN A 10.0.0.138 www IN CNAME thejarbar.org. To a temporary version of: $TTL 3H @ IN SOA ns.thejarbar.org. email. ( 13112012 28800 3600 604800 38400 ); thejarbar.org. IN A 88.89.190.171 @ IN NS ns.thejarbar.org. yuccalaptop IN A 10.0.0.19 ns IN A 88.89.190.171 gw IN A 10.0.0.138 www IN CNAME thejarbar.org. I am using bind and when using named-checkzone on this file according to my zone configurations, this file has no errors. I then run dig thejarbar.org @88.89.190.171 and get an expected authorative reply. My issue is creating my reverse DNS SOA zone and I would gratly appreciate assistance and guidance. I am stuck on how to represent the reverse records correctly for the eddresses that map to my isp IP. I am trying: $TTL 3H 0.0.10.in-addr.arpa. IN SOA ns.thejarbar.org. email. ( 13112012 28800 3600 604800 38400 ); 171.190.89.88. IN PTR thejarbar.org. 171.190.89.88. IN NS ns.thejarbar.org. 19 IN PTR yuccalaptop.thejarbar.org. 138 IN PTR gw.thejarbar.org. www IN PTR www.thejarbar.org. But running named-checkzone on this file leaves an erroneous return that IN: has no NS records I would greatly appreciate assistance

  Read the article

• Squid proxy in cent os often disconnected with error : tunnelConnectTimeout(): tunnelState->servers is NULL

  - by Ela

  I am having very often internet disconnection problem with Squid proxy service. My server config; OS: CentOS release 6.3 (Final) model name : Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz cpu MHz : 1600.000 My Local systems IP range:192.168.2.x Server IP: 192.168.2.11 Also this server is configured with lamp for development,Samba SMB file service manager and No svn currently. So i see maximum possibility is this squid proxy since this is where it stops to connect and am sure when i restart the server net started working so something wrong with this squid service only. And this server is connected with local 14 other windows machines and basically serves as a central development node. I am able to resolve it by restarting the server fully some time or sometimes by restarting the squid proxy which is totally killing our development. I have attached my cache log file here for the error info. Cache log file Sample error log: 2013/07/01 13:25:38| tunnelConnectTimeout(): tunnelState->servers is NULL 2013/07/01 13:25:41| tunnelConnectTimeout(): tunnelState->servers is NULL 2013/07/01 13:25:41| tunnelConnectTimeout(): tunnelState->servers is NULL 2013/07/01 13:25:50| clientProcessRequest: Invalid Request 2013/07/01 13:26:05| tunnelConnectTimeout(): tunnelState->servers is NULL Some help can make our lives easier, Thanks in advance.

  Read the article

• Running DNS locally for home network

  - by Roy Rico

  I have a small home network that just got larger ( New roommate, My existing roommate got a laptop (on top of her computer)j, my friends coming over with laptop, etc ). I'd like to run a local DNS server for lookups of my local network stuff (fileserver.local, windowsTV.local, machineA.local, machineB.local, appletv.local). I used to have a business line with a static IP, and run bind/named internally. However, now, I have a normal account. My ISP's DNS servers are constantly changing (for whatever reasons my ISP doesn't like to keep the same IP range for long). I need my local DNS to be automatically updated to use my ISP's DNS for external traffic, but be able to maintain an internal DNS server (getting to update the hosts file is being a hassle with every new machine on top of rebuilding existing machines with win7 or Ubuntu 9.04). Additionally, My ISP's DNS servers often crash or become unresponsive. Are there any open DNS servers that are reliable (i don't want to reconfig every day) that I could use as my primary, then if those fail, then use my ISP's? UPDATE: Also looking for each workstation to be able to use dhcp to connect, but instead of getting ISP dns servers, getting my internal one.... Thanks

  Read the article

• Static Routes and the Routing Table

  - by TheD

  This is very much a learning question if someone would be happy to explain a couple of concepts. My question is - the default routing table that exists in, in my case, a default Windows 7 install, what do each of the routes in the table do? Here is a screenshot: The 10.128.4.0 is just a route I've added while messing. I understand from a question I posted on Superuser the first route is just a default route that will route all traffic for any IP to my default gateway on my Interface in use. But what about the others? And how would the routing table handle a machine with multiple NIC's, perhaps connected to two different networks, or maybe even two NIC's on the same network so a VM can have a physical Network card instead of each VM sharing the hosts. Thanks!

  Read the article

• Internet doesn't work when enable local network

  - by rakesh yadav

  We have the following network setup: A) Router IP 192.168.51.49 B) Windows Server 2008 R2 with dual NIC: Lan A) WAN interface (192.168.51.50) ( Used for internet) Lan B) LAN interface (192.168.30.228) ( used for local connectivity ) When I keep both LAN Enabled than my internet doesn't work, but if I disable my local LAN then internet works fine. How can I resolve this issue? Do I need to do routing on my server Please find the below attached route print result C:\Users\Administrator>route print =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.51.49 192.168.51.50 276 0.0.0.0 0.0.0.0 192.168.30.227 192.168.30.228 266 192.168.30.224 255.255.255.240 On-link 192.168.30.228 266 192.168.30.228 255.255.255.255 On-link 192.168.30.228 266 192.168.30.239 255.255.255.255 On-link 192.168.30.228 266 192.168.51.48 255.255.255.240 On-link 192.168.51.50 276 192.168.51.50 255.255.255.255 On-link 192.168.51.50 276 192.168.51.63 255.255.255.255 On-link 192.168.51.50 276 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 202.56.230.5 255.255.255.255 192.168.51.49 192.168.51.50 21 202.56.230.6 255.255.255.255 192.168.51.49 192.168.51.50 21 192.168.26.124 255.255.255.255 192.168.51.49 192.168.51.50 21 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.51.50 276 224.0.0.0 240.0.0.0 On-link 192.168.30.228 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.51.50 276 255.255.255.255 255.255.255.255 On-link 192.168.30.228 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.30.227 Default 0.0.0.0 0.0.0.0 192.168.51.49 Default ===========================================================================

  Read the article

• ssh all machines behind a router

  - by Luc

  Hello, I have several machines on my lan. One is used as a http proxy to target web sites located on the others (that's working fine now thanks to ServerFault). On my router, Port 22 is NATed to this proxy machine. I would like to be able to access the other machines, within internet, with something like: ssh user@first_machine.my_domain.tld ssh user@second_machine.my_domain.tld Could I use the proxy machine to 'filter' the incoming ssh request and to route them to the correct machine ? (in the same way it's possible to do so for web sites using a mix of mod_proxy and namevirtualhost in Apache) Thanks a lot, Luc

  Read the article

• Wireless driver not detected by Windows 8

  - by rksh

  I've a problem in my wireless driver on windows 8. I bought a new X500L Asus laptop and installed windows 8 on it. However the driver CD I got with the laptop doesn't support my laptop. The CD says it's designed for Windows 8.1. I tired finding Wireless driver model and finding driver online and installing and that hasn't worked either, the wireless driver is shown at the device manager as not installed. I tired live booting the computer with a live CD of Linux and that also doesn't pick up my wireless driver. Can anyone tell me how to fix it? Thanks

  Read the article

• Free IP address management software

  - by TiFFolk

  We are choosing a system for managing our IP address space. So we are looking for a special free software like IPPlan. So what we have nowadays: Ipplan (Beta IPv6 support) SolarWinds IP address tracker (IPv6 support unknown ) IP module of The NOC Project (BTW, take a look of it, seems to be very promising project) (IPv6 support unknown ) phpIP (Does not support IPv6) IP management from RackTables (Does not support IPv6) Do you know about any other special software, like written above? But: No Wiki No DNS No DHCP No spreadsheet Software should provide: Clear view of available addresses Detail listing of all addresses by subnets/search pattern/owners/additional info It must support adding additional info like owner of IP, domain-name, contacts, etc Multi user support Easy interface Software has to be specially written for address management. Scalability Any OS: win, lin, sol, web

  Read the article

• How can I selectively increase latency? E.g. throttle games

  - by Arcymag

  Basically, I want networked games to run poorly on a network, but I want everything else to run smoothly. I would also appreciate advice on blocking games in general. As far as I can tell, there's a few ways to completely prevent an internet game from running: Blocking entirely via DNS configuration (e.g. hosts file), or router DNS configuration Blocking entirely via a separate DNS server Blocking the application, by uninstalling or some kind of access control Blocking the application by automatically killing the process every once in a while Blocking the application by corrupting files periodically However, I would like a more subtle way to block a program. Something that either: Increases latency (would this be doable through some kind of QoS like what DD-WRT offers?) Increases latency by using a special routing configuration for specific target IPs Throttle other systems resources, such as memory, IO, or CPU Screw around with keyboard configurations when a game is launched I would like this to work on MacOSX and Windows, but Linux would be great too. FYI I don't have a kid, but I was brainstorming with some friends and parents.

  Read the article

• Huawei HG8245T Router - not connecting to another router

  - by BubbaK

  I just got a fiber optic connection installed at home and due to the build of the house, it's mostly cement/bricks, the wireless connection isn't received throughout the house. Previously, to combat this issue, I just ran a hardwire from the modem downstairs and upstairs and had it connected to a secondary (DLink) router. It did the job of getting me seamless wireless internet access everywhere. The issue is now with the new Huawei router, this setup isn't working. I have connected everything as previously, but it seems that the other (DLink) routers are not picking up the connection. I have tried everything and am totally lost as what to do to overcome this problem. Any help would be appreciated.

  Read the article

• Separate computers in my apartment can't communicate to each other?

  - by Razor Storm

  In my apartment, the management provides the building with a network connection. I have my computer plugged into the ethernet coming out of the walls, and my friend who also lives in the apartment building has his computer connected to a separate ethernet jack. As far as I know our two computers are not within a LAN, and ipconfig shows that we only have external ip addresses. The problem, then, appears when we attempt make direct communication between our computers. I have some hosting server set up on my machine, and my friend is unable to connect to it via my ip address. Other people who do not live in the apartment can connect fine. Ethernet adapter Local Area Connection: IPv4 Address. . . . . . . . . . . : 204.29.113.41 Subnet Mask . . . . . . . . . . . : 255.255.254.0 Default Gateway . . . . . . . . . : 204.29.112.1 His ip: 204.29.113.104 Using a fulltunnel vpn doesn't help.

  Read the article

< Previous Page | 162 163 164 165 166 167 168 169 170 171 172 173  | Next Page >