Search Results

Search found 7111 results on 285 pages for 'tab completion'.

Page 167/285 | < Previous Page | 163 164 165 166 167 168 169 170 171 172 173 174  | Next Page >

• How To Skip Commercials in Windows 7 Media Center

  - by DigitalGeekery

  If you use Windows 7 Media Center to record live TV, you’re probably interested in skipping through commercials. After all, a big reason to record programs is to avoid commercials, right? Today we focus on a fairly simple and free way to get you skipping commercials in no time. In Windows 7, the .wtv file format has replaced the dvr-ms file format used in previous versions of Media Center for Recorded TV. The .wtv file format, however, does not work very well with commercial skipping applications.  The Process Our first step will be to convert the recorded .wtv files to the previously used dvr-ms file format. This conversion will be done automatically by WtvWatcher. It’s important to note that this process deletes the original .wtv file after successfully converting to .dvr-ms. Next, we will use DVRMSToolBox with the DTB Addin to handle commercials skipping. This process does not “cut” or remove the commercials from the file. It merely skips the commercials during playback. WtvWatcher Download and install the WTVWatcher (link below). To install WtvWatcher, you’ll need to have Windows Installer 3.1 and .NET Framework 3.5 SP1. If you get the Publisher cannot be verified warning you can go ahead and click Install. We’ve completely tested this app and it contains no malware and runs successfully.   After installing, the WtvWatcher will pop up in the lower right corner of your screen. You will need to set the path to your Recorded TV directory. Click on the button for “Click here to set your recorded TV path…”   The WtvWatcher Preferences window will open…   …and you’ll be prompted to browse for your Recorded TV folder. If you did not change the default location at setup, it will be found at C:\Users\Public\Recorded TV. Click “OK” when finished. Click the “X” to close the Preferences screen. You should now see WtvWatcher begin to convert any existing WTV files.   The process should only take a few minutes per file. Note: If WtvWatcher detects an error during the conversion process, it will not delete the original WTV file.    You will probably want to run WtvWatcher on startup. This will allow WtvWatcher too constantly scan for new .wtv files to convert. There is no setting in the application to run on startup, so you’ll need to copy the WTV icon from your desktop into your Windows start menu “Startup” directory. To do so, click on Start > All Programs, right-click on Startup and click on Open all users. Drag and drop, or cut and paste, the WtvWatcher desktop shortcut into the Startup folder. DVRMSToolBox and DTBAddIn Next, we need to download and install the DVRMSToolBox and the DTBAddIn. These two pieces of software will do the actual commercial skipping. After downloading the DVRMSToolBox zip file, extract it and double-click the setup.exe file.  Click “Next” to begin the installation.   Unless DVRMSToolBox will only be used by Administrator accounts, check the “Modify File Permissions” box. Click “Next.” When you get to the Optional Components window, uncheck Download/Install ShowAnalyzer. We will not be using that application. When the installation is complete, click “Close.”    Next we need to install the DTBAddin. Unzip the download folder and run the appropriate .msi file for your system. It is available in 32 & 64 bit versions. Just double click on the file and take the default options. Click “Finish” when the install is completed. You will then be prompted to restart your computer. After your computer has restarted, open DVRMSToolBox settings by going to Start > All Programs, DVRMSToolBox, and click on DVRMStoMPEGSettings. On the MC Addin tab, make sure that Skip Commercials is checked. It should be by default.   On the Commercial Skip tab, make sure the Auto Skip option is selected. Click “Save.”   If you try to watch recorded TV before the file conversion and commercial indexing process is complete you’ll get the following message pop up in Media Center. If you click Yes, it will start indexing the commercials if WtvWatcher has already converted it to dvr-ms. Now you’re ready to kick back and watch your recorded tv without having to wait through those long commercial breaks. Conclusion The DVRMSToolBox is a powerful and complex application with a multitude of features and utilities. We’ve showed you a quick and easy way to get your Windows Media Center setup to skip commercials. This setup, like virtually all commercial skipping setups, is not perfect. You will occasionally find a commercial that doesn’t get skipped. Need help getting your Windows 7 PC configured for TV? Check out our previous tutorial on setting up live TV in Windows Media Center. Links Download WTV Watcher Download DVRMSToolBox Download DTBAddin Similar Articles Productive Geek Tips Using Netflix Watchnow in Windows Vista Media Center (Gmedia)Increase Skip and Replay Intervals in Windows 7 Media CenterSchedule Updates for Windows Media CenterIntegrate Hulu Desktop and Windows Media Center in Windows 7Add Color Coding to Windows 7 Media Center Program Guide TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet How to Find Your Mac Address Use My TextTools to Edit and Organize Text

  Read the article

• Customize your icons in Windows 7 and Vista

  - by Matthew Guay

  Want to change out the icons on your desktop and more?  Personalizing your icons is a great way to make your PC uniquely yours,, and today we show you how to grab unique icons, and default Winnows. to be your own. Change the icon for Computer, Recycle Bin, Network, and your User folder Right-click on the desktop, and select Personalize. Now, click the “Change desktop icons” link on the left sidebar in the Personalization window. The window looks slightly different in Windows Vista, but the link is the same. Select the icon you wish to change, and click the Change Icon button.  In Windows 7, you will also notice a box to choose whether or not to allow themes to change icons, and you can uncheck it if you don’t want themes to change your icon settings. You can select one of the other included icons, or click browse to find the icon you want.  Click Ok when you are finished. Change Folder icons You can easily change the icon on most folders in Windows Vista and 7.  Simply right-click on the folder and select properties. Click the Customize tab, and then click the Change Icon button.  This will open the standard dialog to change your icon, so proceed as normal. This basically just creates a hidden desktop.ini file in the folder containing the following or similar data: [.ShellClassInfo]IconFile=%SystemRoot%\system32\SHELL32.dllIconIndex=20 You could manually create or edit the file if you choose, instead of using the dialogs. Simply create a new text file named desktop.ini with this same information, or edit the existing one.  Change the IconFile line to the location of your icon. If you are pointing to a .ico file you should change the IconIndex line to 0 instead. Note that this isn’t available for all folders, for instance you can’t use this to change the icon for the Windows folder.   In Windows 7, please note that you cannot change the icon of folder inside a library.  So if you are browsing your Documents library and would like to change an icon in that folder, right-click on it and select Open folder location.  Now you can change the icon as above. And if you would like to change a Library’s icon itself, then check out this tutorial: Change Your Windows 7 Library Icons the Easy Way Change the icon of any file type Want to make you files easier to tell apart?  Check out our tutorial on how to simply do this: Change a File Type’s Icon in Windows 7 Change the icon of any Application Shortcut To change the icon of a shortcut on your desktop, start menu, or in Explorer, simply right-click on the icon and select Properties. In the Shortcut tab, click the Change Icon button. Now choose one of the other available icons or click browse to find the icon you want. Change Icons of Running Programs in the Windows 7 taskbar If your computer is running Windows 7, you can customize the icon of any program running in the taskbar!  This only works on applications that are running but not pinned to the taskbar, so if you want to customize a pinned icon you may want to unpin it before customizing it.  But the interesting thing about this trick is that it can customize any icon anything running in the taskbar, including things like Control Panel! Right-click or click and push up to open the jumplist on the icon, and then right-click on the program’s name and select Properties.  Here we are customizing Control Panel, but you can do this on any application icon. Now, click Change Icon as usual. Select an icon you want (We switched the Control Panel icon to the Security Shield), or click Browse to find another icon.  Click Ok when finished, and then close the application window. The next time you open the program (or Control Panel in our example), you will notice your new icon on its taskbar icon. Please note that this only works on applications that are currently running and are not pinned to the taskbar.  Strangely, if the application is pinned to the taskbar, you can still click Properties and change the icon, but the change will not show up. Change the icon on any Drive on your Computer You can easily change the icon on your internal hard drives and portable drives with the free Drive Icon Changer application.  Simply download and unzip the file (link below), and then run the application as administrator by right-clicking on the icon and selecting “Run as administrator”. Now, select the drive that you want to change the icon of, and select your desired icon file. Click Save, and Drive Icon Changer will let you know that the icon has been changed successfully. You will then need to reboot your computer to complete the changes.  Simply click Yes to reboot. Now, our Drive icon is changed from this default image: to a Laptop icon we chose! You can do this to any drive in your computer, or to removable drives such as USB flash drives.  When you change these drives icons, the new icon will appear on any computer you insert the drive into.  Also, if you wish to remove the icon change, simply run the Drive Icon Changer again and remove the icon path. Download Drive Icon Changer This application actually simply creates or edits a hidden Autorun.inf file on the top of your drive.  You can edit or create the file yourself by hand if you’d like; simply include the following information in the file, and save it in the top directory of your drive: [autorun]ICON=[path of your icon] Remove Arrow from shortcut icons Many people don’t like the arrow on the shortcut icon, and there are two easy ways to do this. If you’re running the 32 bit version of Windows Vista or 7, simply use the Vista Shortcut Overlay Remover. If your computer is running the 64 bit version of Windows Vista or 7, use the Ultimate Windows Tweaker instead.  Simply select the Additional Tweaks section, and check the “Remove arrows from Shortcut Icons.” For more info and download links check out this article: Disable Shortcut Icon Arrow Overlay in Windows 7 or Vista Closing: This gives you a lot of ways to customize almost any icon on your computer, so you can make it look just like you want it to.  Stay tuned for more great desktop customization articles from How-to Geek! Similar Articles Productive Geek Tips Change Start Menu to Use Small Icons in Windows 7 or VistaResize Icons Quickly in Windows 7 or Vista ExplorerRoundup: 16 Tweaks to Windows Vista Look & FeelRestore Missing Desktop Icons in Windows 7 or VistaClean Up Past Notification Icons in Windows Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Change DNS servers on the fly with DNS Jumper Live PDF Searches PDF Files and Ebooks Converting Mp4 to Mp3 Easily Use Quick Translator to Translate Text in 50 Languages (Firefox) Get Better Windows Search With UltraSearch Scan News With NY Times Article Skimmer

  Read the article

• Change or Reset Windows Password from a Ubuntu Live CD

  - by Trevor Bekolay

  If you can’t log in even after trying your twelve passwords, or you’ve inherited a computer complete with password-protected profiles, worry not – you don’t have to do a fresh install of Windows. We’ll show you how to change or reset your Windows password from a Ubuntu Live CD. This method works for all of the NT-based version of Windows – anything from Windows 2000 and later, basically. And yes, that includes Windows 7. You’ll need a Ubuntu 9.10 Live CD, or a bootable Ubuntu 9.10 Flash Drive. If you don’t have one, or have forgotten how to boot from the flash drive, check out our article on creating a bootable Ubuntu 9.10 flash drive. The program that lets us manipulate Windows passwords is called chntpw. The steps to install it are different in 32-bit and 64-bit versions of Ubuntu. Installation: 32-bit Open up Synaptic Package Manager by clicking on System at the top of the screen, expanding the Administration section, and clicking on Synaptic Package Manager. chntpw is found in the universe repository. Repositories are a way for Ubuntu to group software together so that users are able to choose if they want to use only completely open source software maintained by Ubuntu developers, or branch out and use software with different licenses and maintainers. To enable software from the universe repository, click on Settings > Repositories in the Synaptic window. Add a checkmark beside the box labeled “Community-maintained Open Source software (universe)” and then click close. When you change the repositories you are selecting software from, you have to reload the list of available software. In the main Synaptic window, click on the Reload button. The software lists will be downloaded. Once downloaded, Synaptic must rebuild its search index. The label over the text field by the Search button will read “Rebuilding search index.” When it reads “Quick search,” type chntpw in the text field. The package will show up in the list. Click on the checkbox near the chntpw name. Click on Mark for Installation. chntpw won’t actually be installed until you apply the changes you’ve made, so click on the Apply button in the Synaptic window now. You will be prompted to accept the changes. Click Apply. The changes should be applied quickly. When they’re done, click Close. chntpw is now installed! You can close Synaptic Package Manager. Skip to the section titled Using chntpw to reset your password. Installation: 64-bit The version of chntpw available in Ubuntu’s universe repository will not work properly on a 64-bit machine. Fortunately, a patched version exists in Debian’s Unstable branch, so let’s download it from there and install it manually. Open Firefox. Whether it’s your preferred browser or not, it’s very readily accessible in the Ubuntu Live CD environment, so it will be the easiest to use. There’s a shortcut to Firefox in the top panel. Navigate to http://packages.debian.org/sid/amd64/chntpw/download and download the latest version of chntpw for 64-bit machines. Note: In most cases it would be best to add the Debian Unstable branch to a package manager, but since the Live CD environment will revert to its original state once you reboot, it’ll be faster to just download the .deb file. Save the .deb file to the default location. You can close Firefox if desired. Open a terminal window by clicking on Applications at the top-left of the screen, expanding the Accessories folder, and clicking on Terminal. In the terminal window, enter the following text, hitting enter after each line: cd Downloadssudo dpkg –i chntpw* chntpw will now be installed. Using chntpw to reset your password Before running chntpw, you will have to mount the hard drive that contains your Windows installation. In most cases, Ubuntu 9.10 makes this simple. Click on Places at the top-left of the screen. If your Windows drive is easily identifiable – usually by its size – then left click on it. If it is not obvious, then click on Computer and check out each hard drive until you find the correct one. The correct hard drive will have the WINDOWS folder in it. When you find it, make a note of the drive’s label that appears in the menu bar of the file browser. If you don’t already have one open, start a terminal window by going to Applications > Accessories > Terminal. In the terminal window, enter the commands cd /medials pressing enter after each line. You should see one or more strings of text appear; one of those strings should correspond with the string that appeared in the title bar of the file browser earlier. Change to that directory by entering the command cd <hard drive label> Since the hard drive label will be very annoying to type in, you can use a shortcut by typing in the first few letters or numbers of the drive label (capitalization matters) and pressing the Tab key. It will automatically complete the rest of the string (if those first few letters or numbers are unique). We want to switch to a certain Windows directory. Enter the command: cd WINDOWS/system32/config/ Again, you can use tab-completion to speed up entering this command. To change or reset the administrator password, enter: sudo chntpw SAM SAM is the file that contains your Windows registry. You will see some text appear, including a list of all of the users on your system. At the bottom of the terminal window, you should see a prompt that begins with “User Edit Menu:” and offers four choices. We recommend that you clear the password to blank (you can always set a new password in Windows once you log in). To do this, enter “1” and then “y” to confirm. If you would like to change the password instead, enter “2”, then your desired password, and finally “y” to confirm. If you would like to reset or change the password of a user other than the administrator, enter: sudo chntpw –u <username> SAM From here, you can follow the same steps as before: enter “1” to reset the password to blank, or “2” to change it to a value you provide. And that’s it! Conclusion chntpw is a very useful utility provided for free by the open source community. It may make you think twice about how secure the Windows login system is, but knowing how to use chntpw can save your tail if your memory fails you two or eight times! Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDChange Your Forgotten Windows Password with the Linux System Rescue CDHow to Create and Use a Password Reset Disk in Windows Vista & Windows 7Reset Your Forgotten Password the Easy Way Using the Ultimate Boot CD for WindowsHow to install Spotify in Ubuntu 9.10 using Wine TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Add a Custom Title in IE using Spybot or Spyware Blaster When You Need to Hail a Taxi in NYC Live Map of Marine Traffic NoSquint Remembers Site Specific Zoom Levels (Firefox) New Firefox release 3.6.3 fixes 1 Critical bug Dark Side of the Moon (8-bit)

  Read the article

• On Her Majesty's Secret Source Code: .NET Reflector 7 Early Access Builds Now Available

  - by Bart Read

  Dodgy Bond references aside, I'm extremely happy to be able to tell you that we've just released our first .NET Reflector 7 Early Access build. We're going to make these available over the coming weeks via the main .NET Reflector download page at: http://reflector.red-gate.com/Download.aspx Please have a play and tell us what you think in the forum we've set up. Also, please let us know if you run into any problems in the same place. The new version so far comes with numerous decompilation improvements including (after 5 years!) support for iterator blocks - i.e., the yield statement first seen in .NET 2.0. We've also done a lot of work to solidify the support for .NET 4.0. Clive's written about the work he's done to support iterator blocks in much more detail here, along with the odd problem he's encountered when dealing with compiler generated code: http://www.simple-talk.com/community/blogs/clivet/96199.aspx. On the UI front we've started what will ultimately be a rewrite of the entire front-end, albeit broken into stages over two or three major releases. The most obvious addition at the moment is tabbed browsing, which you can see in Figure 1. Figure 1. .NET Reflector's new tabbed decompilation feature. Use CTRL+Click on any item in the assembly browser tree, or any link in the source code view, to open it in a new tab. This isn't by any means finished. I'll be tying up loose ends for the next few weeks, with a major focus on performance and resource usage. .NET Reflector has historically been a largely single-threaded application which has been fine up until now but, as you might expect, the addition of browser-style tabbing has pushed this approach somewhat beyond its limit. You can see this if you refresh the assemblies list by hitting F5. This shows up another problem: we really need to make Reflector remember everything you had open before you refreshed the list, rather than just the last item you viewed - I discovered that it's always done the latter, but it used to hide all panes apart from the treeview after a Refresh, including the decompiler/disassembler window. Ultimately I've got plans to add the whole VS/Chrome/Firefox style ability to drag a tab into the middle of nowhere to spawn a new window, but I need to be mindful of the add-ins, amongst other things, so it's possible that might slip to a 7.5 or 8.0 release. You'll also notice that .NET Reflector 7 now needs .NET 3.5 or later to run. We made this jump because we wanted to offer ourselves a much better chance of adding some really cool functionality to support newer technologies, such as Silverlight and Windows Phone 7. We've also taken the opportunity to start using WPF for UI development, which has frankly been a godsend. The learning curve is practically vertical but, I kid you not, it's just a far better world. Really. Stop using WinForms. Now. Why are you still using it? I had to go back and work on an old WinForms dialog for an hour or two yesterday and it really made me wince. The point is we'll be able to move the UI in some exciting new directions that will make Reflector easier to use whilst continuing to develop its functionality without (and this is key) cluttering the interface. The 3.5 language enhancements should also enable us to be much more productive over the longer term. I know most of you have .NET Fx 3.5 or 4.0 already but, if you do need to install a new version, I'd recommend you jump straight to 4.0 because, for one thing, it's faster, and if you're starting afresh there's really no reason not to. Despite the Fx version jump the Visual Studio add-in should still work fine in Visual Studio 2005, and obviously will continue to work in Visual Studio 2008 and 2010. If you do run into problems, again, please let us know here. As before, we continue to support every edition of Visual Studio exception the Express Editions. Speaking of Visual Studio, we've also been improving the add-in. You can now open and explore decompiled code for any referenced assembly in any project in your solution. Just right-click on the reference, then click Decompile and Explore on the context menu. Reflector will pop up a progress box whilst it decompiles your assembly (Figure 2) - you can move this out of the way whilst you carry on working. Figure 2. Decompilation progress. This isn't modal so you can just move it out of the way and carry on working. Once it's done you can explore your assembly in the Reflector treeview (Figure 3), also accessible via the .NET Reflector Explore Decompiled Assemblies main menu item. Double-click on any item to open decompiled source in the Visual Studio source code view. Use right-click and Go To Definition on the source view context menu to navigate through the code. Figure 3. Using the .NET Reflector treeview within Visual Studio. Double-click on any item to open decompiled source in the source code view. There are loads of other changes and fixes that have gone in, often under the hood, which I don't have room to talk about here, and plenty more to come over the next few weeks. I'll try to keep you abreast of new functionality and changes as they go in. There are a couple of smaller things worth mentioning now though. Firstly, we've reorganised the menus and toolbar in Reflector itself to more closely mirror what you might be used to in other applications. Secondly, we've tried to make some of the functionality more discoverable. For example, you can now switch decompilation target framework version directly from the toolbar - and the default is now .NET 4.0. I think that about covers it for the moment. As I said, please use the new version, and send us your feedback. Here's that download URL again: http://reflector.red-gate.com/Download.aspx. Until next time! Technorati Tags: .net reflector,7,early access,new version,decompilation,tabbing,visual studio,software development,.net,c#,vb

  Read the article

• HPC Server Dynamic Job Scheduling: when jobs spawn jobs

  - by JoshReuben

  HPC Job Types HPC has 3 types of jobs http://technet.microsoft.com/en-us/library/cc972750(v=ws.10).aspx · Task Flow – vanilla sequence · Parametric Sweep – concurrently run multiple instances of the same program, each with a different work unit input · MPI – message passing between master & slave tasks But when you try go outside the box – job tasks that spawn jobs, blocking the parent task – you run the risk of resource starvation, deadlocks, and recursive, non-converging or exponential blow-up. The solution to this is to write some performance monitoring and job scheduling code. You can do this in 2 ways: manually control scheduling - allocate/ de-allocate resources, change job priorities, pause & resume tasks , restrict long running tasks to specific compute clusters Semi-automatically - set threshold params for scheduling. How – Control Job Scheduling In order to manage the tasks and resources that are associated with a job, you will need to access the ISchedulerJob interface - http://msdn.microsoft.com/en-us/library/microsoft.hpc.scheduler.ischedulerjob_members(v=vs.85).aspx This really allows you to control how a job is run – you can access & tweak the following features: max / min resource values whether job resources can grow / shrink, and whether jobs can be pre-empted, whether the job is exclusive per node the creator process id & the job pool timestamp of job creation & completion job priority, hold time & run time limit Re-queue count Job progress Max/ min Number of cores, nodes, sockets, RAM Dynamic task list – can add / cancel jobs on the fly Job counters When – poll perf counters Tweaking the job scheduler should be done on the basis of resource utilization according to PerfMon counters – HPC exposes 2 Perf objects: Compute Clusters, Compute Nodes http://technet.microsoft.com/en-us/library/cc720058(v=ws.10).aspx You can monitor running jobs according to dynamic thresholds – use your own discretion: Percentage processor time Number of running jobs Number of running tasks Total number of processors Number of processors in use Number of processors idle Number of serial tasks Number of parallel tasks Design Your algorithms correctly Finally , don’t assume you have unlimited compute resources in your cluster – design your algorithms with the following factors in mind: · Branching factor - http://en.wikipedia.org/wiki/Branching_factor - dynamically optimize the number of children per node · cutoffs to prevent explosions - http://en.wikipedia.org/wiki/Limit_of_a_sequence - not all functions converge after n attempts. You also need a threshold of good enough, diminishing returns · heuristic shortcuts - http://en.wikipedia.org/wiki/Heuristic - sometimes an exhaustive search is impractical and short cuts are suitable · Pruning http://en.wikipedia.org/wiki/Pruning_(algorithm) – remove / de-prioritize unnecessary tree branches · avoid local minima / maxima - http://en.wikipedia.org/wiki/Local_minima - sometimes an algorithm cant converge because it gets stuck in a local saddle – try simulated annealing, hill climbing or genetic algorithms to get out of these ruts   watch out for rounding errors – http://en.wikipedia.org/wiki/Round-off_error - multiple iterations can in parallel can quickly amplify & blow up your algo ! Use an epsilon, avoid floating point errors,  truncations, approximations Happy Coding !

  Read the article

• CodePlex Daily Summary for Saturday, May 15, 2010

  CodePlex Daily Summary for Saturday, May 15, 2010New ProjectsBizTalk EDI Guidance: BizTalk EDI Guidance is intended to simplify the delivery of EDI solutions by leveraging the ESB Toolkit. This project is currently Alpha and sh...Continues Integration Sample: I'm providing a series of blog post to show a complete CI process using CruiseControl.Net and msbuild. The source code for this series is hosted here.DioM2D: My Dragons in our Midst RPG. Runs on my custom Starlight Engine.Ethical Hacking ASP.NET: Security tools and guidelines for white-hat hacking and protecting ASP.NET web applications.Farseer Engine with XNATouch: Farseer is great engine for game physics. This implementation uses XNATouch framework.Feature Builder Guidance Extensions: Feature Builder Guidance Extensions are Feature Extensions which extend the guidance for the Feature Building experience. Each FBGX will be suppli...Microsoft Office Document Security: MODS is a plugin for office 2007 thats includes Hash Encryption, Hex Convertion and more. Plugins: MODS For Word still working on (MODS for Excel ...Minimize Engine (XNA): The Minimize Engine is a basic 3D Games Engine created using XNA, with its primary focus around Grid Based games.MSForge TownCrier: This project is meant to build a notification and calling system for MSForge.net User Groups.NatureProtector: Silverlight 4 project.OutSync: OutSync is a free Windows desktop application that syncs photos of your Facebook friends with matching contacts in Microsoft Outlook. It allows you...Quick Save Images, Clipboard save to file, Quick save, bmp, png, jpeg, Image: ClipSa is a very small tool for very quick picture saving. You put some picture into the clipboard (PrintScrn/Alt-PrintScrn/Ctrl-C), ClipSa saves ...ResHelper Manager: Resource strings management tool that creates localization files for any type of localization target (asp.net, wpf and so on...)SecureCookieHttpModule: Secure your session cookie (and other session-based) cookies for replay attacks using this easy to use ASP.NET HttpModule.simpleChMS: A Church Management System (ChMS) designed for churches or ministries like youth groups that want to facilitate better care or theie membership. Fo...sMAPtool: -SPDomainObject: mapping strong type objects to sp listsSQL Trim: This project aims at developing a universal trim function for Microsoft SQL Server. It trims: 1) pre spaces 2) post spaces 3) double spaces 3) subs...TurretGunner: mt-experienceNew ReleasesBeanProxy: BeanProxy 3.0: BeanProxy is a C# (.NET 3.5) library housing classes that facilitates unit testing. Any non-static, public interface/class or abstract class can be...Blueset Studio Opensource Projects: 蓝色之风记事本 0.2 Alpha: 一个超级Bug版本……CSharp Intellisense: V2.1: - Bug fix (Pascal Casing)DioM2D: DioM2D0.01: http://www.dragonsinourmidst.com/forums/showthread.php?p=690058#post690058Ethical Hacking ASP.NET: Version 1.0.0.1: This is the initial release of the project. Read more about the available tests and features on the Documentation tab. You need the full .NET Frame...Event Scavenger: Collector service update - version 3.2.4: Added check if the database connection string is set up in the config file.Feature Builder Guidance Extensions: FBGX-Binaries: This release consists of a zip file containing all the VSIXs resulting from building each of the FBGX packages found here as source. This will mak...Floe IRC Client: Floe IRC Client 2010-05 R2: - Detaching windows (right click on the tabs to detach them) - Highlight lines with your nick or other patterns - Fixed several bugs - Tabs can now...Free language translator and file converter: Free Language Translator 1.96: Fixed some minor bugs and improved the UI a bit. If you can not install the msi file you might be missing some prerequisites. You can try running t...Geocache Downloader: release 1.0: This is the first release.kp.net: Alpha release is avalable: The goal of this alpha release is to try the code in some production scenarios and find out what features should be tuned.Live-Exchange Calendar Sync: Live-Exchange Calendar Sync: Live-Exchange Calendar Sync Beta May 14, 2010 release of Live-Exchange Calendar Sync 1.0 BETA. (Version 45334) Getting StartedInfo about installat...MAPILab Explorer for SharePoint: MAPILab Explorer for SharePoint ver 2.1.1: 1) Small bug fixed that appears on first start (when earliers versions wasn't installed). How to install:Download ZIP file and extract it on Sha...Microsoft Office Document Security: MODS 4 WORD (SOURCE INCLUDED): Includes Source CodeMoonyDesk (windows desktop widgets): MoonyDesk Alpha: MoonyDesk Alpha (some memory improvements)OnTopReplica: Release 2.9.3: Some bugfixes and improvements. Czech translation added (thanks René Mihula).OutSync: OutSync v1.0.100.0: OutSync v1.0.100.0 is the final release by Mel before the move to CodePlex. I have tested it on Windows 7 32bit and 64bit with Office 2007 and it ...Quick Save Images, Clipboard save to file, Quick save, bmp, png, jpeg, Image: Clipsa v 0.1: Download and extract to any place 2 files - clipSa.exe and clipSa.exe.config Run clipSa.exe. That's all.ResHelper Manager: ResHelperManager: List of changes applied to this version of ResHelper is included in main download zip package. Example sourcesIn Source Code tab are sources of De...Rx Contrib: V1.3: - Bug Fix - BufferWithTimeOrCount with flexible time period setting when ever the time period elapsed...SharePoint DVK Integration: SharePoint 2007 DVK integration v1.0.3: Fixes Fixed default field bindings. I rebound too many fields on every page load. Fixed extension replacing on creating target url (threw it out)...ShoutcastStast for DotNetNuke: DNN_ShoutcastStats alpha 05.00.495: First Alpha release of ShoutcastStats Module for DotNetNuke This first alpha version of the ShoutcastStats Module for DotNetNuke is still in devel...SilverPart 2.1: SilverPart 2.1: SilverPart 2.1 This interim release fixes some major bugs related to Firefox and anonymous access. - Fix for Issue ID 4005 - SilverPart does not w...sMAPtool: sMAPedit v0.7c (Base Release with Maps): Fixed: force a gargabe collection update to prevent pictureBox's memory leak Added: essential map pack with all basic maps in jpg format Added:...SQL Trim: Trim: Initial releaseSSIS Multiple Hash: Multiple Hash V1.2.1: This is version 1.2.1 of the Multiple Hash SSIS Component. It supports SQL 2005 and SQL 2008, although you have to download the correct install pa...StreamInsight Yahoo Finance input adapter example: StockTicker_v1_0_RTM: Updated for StreamInsight RTM.Update Controls .NET: 2.1.0.0: Automatic dependency management for WPF and Silverlight data binding. This release combines both the WPF and Silverlight assemblies into one insta...VCC: Latest build, v2.1.30514.0: Automatic drop of latest buildMost Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryMicrosoft SQL Server Community & SamplesPHPExcelASP.NETMost Active Projectspatterns & practices – Enterprise LibraryMirror Testing SystemRawrPHPExcelBlogEngine.NETMicrosoft Biology FoundationCustomer Portal Accelerator for Microsoft Dynamics CRMWindows Azure Command-line Tools for PHP DevelopersShake - C# MakeStyleCop

  Read the article

• Oracle Enterprise Manager 12c Integration With Oracle Enterprise Manager Ops Center 11g

  - by Scott Elvington

  In a blog entry earlier this year, we announced the availability of the Ops Center 11g plug-in for Enterprise Manager 12c. In this article I will walk you through the process of deploying the plug-in on your existing Enterprise Manager agents and show you some of the capabilities the plug-in provides. We'll also look at the integration from the Ops Center perspective. I will show you how to set up the connection to Enterprise Manager and give an overview of the information that is available. Installing and Configuring the Ops Center Plug-in The plug-in is available for download from the Self Update page (Setup ? Extensibility ? Self Update). The plug-in name is “Ops Center Infrastructure stack”. Once you have downloaded the plug-in you can navigate to the Plug-In management page (Setup ? Extensibility ? Plug-ins) to begin deployment. The plug-in must first be deployed on the Management Server. You will need to provide the repository password of the SYS user in order to deploy the plug-in to the Management Server. There are a few pre-requisites that need to be completed on the Ops Center side before the plug-in can be deployed and configured on the desired Enterprise Manager agents. Any servers, whether physical or virtual, for which you wish to see metrics and alerts need to be managed by Ops Center. This means that the Operating System needs to have an Ops Center management agent installed as a minimum. The plug-in can provide even more value when Ops Center is also managing the other “layers of the stack”, for example the service processor, the blade chassis or the XSCF of an M-Series server. The more information that Ops Center has about the stack, the more information that will be visible within Enterprise Manager via the plug-in. In order to access the information within Ops Center, the plug-in requires a user to connect as. This user does not require any particular Ops Center permissions or roles, it simply needs to exist. You can create a specific “EMPlugin” user within Ops Center or use an existing user. Oracle recommends creating a specific, non-privileged user account within Ops Center for this purpose. From the Ops Center Administration section, select Enterprise Controller, click the Users tab and finally click the Add User icon to create the desired user account. For the purpose of this article I have discovered and managed the OS and service processor of the server where my Enterprise Manager 12c installation is hosted. With the plug-in deployed to the Management Server and the setup done within Ops Center, we're now ready to deploy the plug-in to the agents and configure the targets to communicate with the Ops Center Enterprise Controller. From the Setup menu select Add Targets then Add Targets Manually. Select the bottom radio button “Add Targets Manually by Specifying Target Monitoring Properties”, select Infrastructure Stack from the Target Type dropdown and finally, select the Monitoring Agent where you wish to deploy the plug-in. Click the Add Manually.... button and fill in the details for the new target using the appropriate hostname for your Enterprise Controller and the user and password details for the plug-in access user. After the target has been added to the agent you will need to allow a few minutes for the initial data collection to complete. Once completed you can see the new target in the All Targets list. All metric collections are enabled by default except one. To enable Infrastructure Stack Alarms collection, navigate to the newly added target and then to Target ? Monitoring ? Metric and Collection Settings. There you can click the “Disabled” link under Collection Schedule to enable collection and set your desired collection frequency. By default, a Warning level alert in Ops Center will equate to a Warning level event in Enterprise Manager and a Critical alert will equate to a Critical event. This mapping can be altered in the Metric and Collection Settings also. The default incident rules in Enterprise Manager only create incidents from Critical events so keep this in mind in case you want to see incidents generated for Warning or Info level alerts from Ops Center. Also, because Enterprise Manager already monitors the OS through it's Host target type, the plug-in does not pull OS alerts from Ops Center so as to prevent duplication. In addition to alert propagation, the plug-in also provides data for several reports detailing the topology and configuration of the stack as well as any hardware sensor data that is available. These are available from the Information Publisher Reports. Navigate there from the Enterprise ? Reports menu or directly from the Infrastructure Stack target of interest. As an example, here is a sample of the Hardware Sensors report showing some of the available sensor data. The report can also be exported to a CSV file format if desired. Connecting Ops Center to Enterprise Manager Repository For an Enterprise Manager user, the plug-in provides a deeper visibility to the state of the infrastructure underlying the databases and middleware. On the Ops Center side, there is also a greater visibility to the targets running on the infrastructure. To set up the Ops Center data collection, just navigate to the Administration section and select the Grid Control link. Select the Configure/Connect action from the right-hand menu and complete the wizard forms to enable the connection to the Enterprise Manager repository and UI. Be sure to use the sysman account when configuring the database connection. Once the job completes and the initial data synchronization is done you will see new Target tabs on your OS assets. The new tab lists all the Enterprise Manager targets and any alerts, availability and performance data specific to the selected target. It is also possible to use the GoTo icon to launch the Enterprise Manager BUI in context of the specific target or alert to drill into more detail. Hopefully this brief overview of the integration between Enterprise Manager and Ops Center has provided a jumpstart to getting a more complete view of the full stack of your enterprise systems.

  Read the article

• How To - Guide to Importing Data from a MySQL Database to Excel using MySQL for Excel

  - by Javier Treviño

  Fetching data from a database to then get it into an Excel spreadsheet to do analysis, reporting, transforming, sharing, etc. is a very common task among users. There are several ways to extract data from a MySQL database to then import it to Excel; for example you can use the MySQL Connector/ODBC to configure an ODBC connection to a MySQL database, then in Excel use the Data Connection Wizard to select the database and table from which you want to extract data from, then specify what worksheet you want to put the data into.  Another way is to somehow dump a comma delimited text file with the data from a MySQL table (using the MySQL Command Line Client, MySQL Workbench, etc.) to then in Excel open the file using the Text Import Wizard to attempt to correctly split the data in columns. These methods are fine, but involve some degree of technical knowledge to make the magic happen and involve repeating several steps each time data needs to be imported from a MySQL table to an Excel spreadsheet. So, can this be done in an easier and faster way? With MySQL for Excel you can. MySQL for Excel features an Import MySQL Data action where you can import data from a MySQL Table, View or Stored Procedure literally with a few clicks within Excel.  Following is a quick guide describing how to import data using MySQL for Excel. This guide assumes you already have a working MySQL Server instance, Microsoft Office Excel 2007 or 2010 and MySQL for Excel installed. 1. Opening MySQL for Excel Being an Excel Add-In, MySQL for Excel is opened from within Excel, so to use it open Excel, go to the Data tab located in the Ribbon and click MySQL for Excel at the far right of the Ribbon. 2. Creating a MySQL Connection (may be optional) If you have MySQL Workbench installed you will automatically see the same connections that you can see in MySQL Workbench, so you can use any of those and there may be no need to create a new connection. If you want to create a new connection (which normally you will do only once), in the Welcome Panel click New Connection, which opens the Setup New Connection dialog. Here you only need to give your new connection a distinctive Connection Name, specify the Hostname (or IP address) where the MySQL Server instance is running on (if different than localhost), the Port to connect to and the Username for the login. If you wish to test if your setup is good to go, click Test Connection and an information dialog will pop-up stating if the connection is successful or errors were found. 3.Opening a connection to a MySQL Server To open a pre-configured connection to a MySQL Server you just need to double-click it, so the Connection Password dialog is displayed where you enter the password for the login. 4. Selecting a MySQL Schema After opening a connection to a MySQL Server, the Schema Selection Panel is shown, where you can select the Schema that contains the Tables, Views and Stored Procedures you want to work with. To do so, you just need to either double-click the desired Schema or select it and click Next >. 5. Importing data… All previous steps were really the basic minimum needed to drill-down to the DB Object Selection Panel  where you can see the Database Objects (grouped by type: Tables, Views and Procedures in that order) that you want to perform actions against; in the case of this guide, the action of importing data from them. a. From a MySQL Table To import from a Table you just need to select it from the list of Database Objects’ Tables group, after selecting it you will note actions below the list become available; then click Import MySQL Data. The Import Data dialog is displayed; you can see some basic information here like the name of the Excel worksheet the data will be imported to (in the window title), the Table Name, the total Row Count and a 10 row preview of the data meant for the user to see the columns that the table contains and to provide a way to select which columns to import. The Import Data dialog is designed with defaults in place so all data is imported (all rows and all columns) by just clicking Import; this is important to minimize the number of clicks needed to get the job done. After the import is performed you will have the data in the Excel worksheet formatted automatically. If you need to override the defaults in the Import Data dialog to change the columns selected for import or to change the number of imported rows you can easily do so before clicking Import. In the screenshot below the defaults are overridden to import only the first 3 columns and rows 10 – 60 (Limit to 50 Rows and Start with Row 10). If the number of rows to be imported exceeds the maximum number of rows Excel can hold in its worksheet, a warning will be displayed in the dialog, meaning the imported number of rows will be limited by that maximum number (65,535 rows if the worksheet is in Compatibility Mode).  In the screenshot below you can see the Table contains 80,559 rows, but only 65,534 rows will be imported since the first row is used for the column names if the Include Column Names as Headers checkbox is checked. b. From a MySQL View Similar to the way of importing from a Table, to import from a View you just need to select it from the list of Database Objects’ Views group, then click Import MySQL Data. The Import Data dialog is displayed; identically to the way everything looks when importing from a table, the dialog displays the View Name, the total Row Count and the data preview grid. Since Views are really a filtered way to display data from Tables, it is actually as if we are extracting data from a Table; so the Import Data dialog is actually identical for those 2 Database Objects. After the import is performed, the data in the Excel spreadsheet looks like the following screenshot. Note that you can override the defaults in the Import Data dialog in the same way described above for importing data from Tables. Also the Compatibility Mode warning will be displayed if data exceeds the maximum number of rows explained before. c. From a MySQL Procedure Too import from a Procedure you just need to select it from the list of Database Objects’ Procedures group (note you can see Procedures here but not Functions since these return a single value, so by design they are filtered out). After the selection is made, click Import MySQL Data. The Import Data dialog is displayed, but this time you can see it looks different to the one used for Tables and Views.  Given the nature of Store Procedures, they require first that values are supplied for its Parameters and also Procedures can return multiple Result Sets; so the Import Data dialog shows the Procedure Name and the Procedure Parameters in a grid where their values are input. After you supply the Parameter Values click Call. After calling the Procedure, the Result Sets returned by it are displayed at the bottom of the dialog; output parameters and the return value of the Procedure are appended as the last Result Set of the group. You can see each Result Set is displayed as a tab so you can see a preview of the returned data.  You can specify if you want to import the Selected Result Set (default), All Result Sets – Arranged Horizontally or All Result Sets – Arranged Vertically using the Import drop-down list; then click Import. After the import is performed, the data in the Excel spreadsheet looks like the following screenshot.  Note in this example all Result Sets were imported and arranged vertically. As you can see using MySQL for Excel importing data from a MySQL database becomes an easy task that requires very little technical knowledge, so it can be done by any type of user. Hope you enjoyed this guide! Remember that your feedback is very important for us, so drop us a message: MySQL on Windows (this) Blog - https://blogs.oracle.com/MySqlOnWindows/ Forum - http://forums.mysql.com/list.php?172 Facebook - http://www.facebook.com/mysql Cheers!

  Read the article

• Oracle AutoVue Key Highlights from Oracle OpenWorld 2012

  - by Celine Beck

  We closed another successful Oracle Open World for AutoVue. Thanks to everyone who joined us this year. As usual, from customer presentations to evening networking activities, there was enough to keep us busy during the entire event. Here is a summary of some of the key highlights of the conference: Sessions:We had two AutoVue-specific sessions during Oracle Open World this year. The first session was part of the Product Lifecycle Management track and covered how AutoVue can be used to help drive effective decision making and streamline design for manufacturing processes. Attendees had the opportunity to learn from customer speaker GLOBALFOUNDRIES how they have been leveraging Oracle AutoVue within Agile PLM to enable high degree of collaboration during the exceptionally creative phases of their product development processes, securely, without risking valuable intellectual property. If you are interested, you can actually download the presentation by visiting launch.oracle.com/?plmopenworld2012.AutoVue was also featured as part of the Utilities track. This session focused on how visualization solutions play a critical role in effective plant optimization and configuration strategies defined by owners and operators of power generation facilities. Attendees learnt how integrated with document management systems, and enterprise applications like Oracle Primavera and Asset Lifecycle Management, AutoVue improves change management processes; minimizes risks by providing access to accurate engineering drawings which capture and reflect the as-maintained status of assets; and allows customers to drive complex maintenance projects to successful completion.Augmented Business Visualization for Agile PLMDuring Oracle Open World, we also showcased an Augmented Business Visualization-based solution for Oracle Agile PLM. An Augmented Business Visualization (ABV) solution is one where your structured data (from Oracle Agile PLM for instance) and your unstructured data (documents, designs, 3D models, etc) come together to allow you to make better decisions (check out our blog posts on the topic: Augment the Value of Your Data (or Time to replace the “attach” button) and Context is Everything ). As part of the Agile PLM, the idea is to support more effective decision-making by turning 3D assemblies into color-coded reports, and streamlining business processes like Engineering Change Management by enabling the automatic creation of engineering change requests in Agile PLM directly from documents being viewed in AutoVue. More on this coming soon...probably during the Oracle Value Chain Summit to be held in San Francisco, from Feb. 4-6, 2013 in San Francisco! Mark your calendars and stay tuned for more information! And thanks again for joining us at Oracle OpenWorld!

  Read the article

• Build Mobile App for E-Business Suite Using SOA Suite and ADF Mobile

  - by Michelle Kimihira

  With the upcoming release of Oracle ADF Mobile, I caught up with Srikant Subramaniam, Senior Principal Product Manager, Oracle Fusion Middleware post OpenWorld to learn about the cool hands-on lab at OpenWorld.  For those of you who missed it, you will want to keep reading... Author: Srikant Subramaniam, Senior Principal Product Manager,Oracle Fusion Middleware Oracle ADF Mobile enables rapid and declarative development of native on-device mobile applications. These native applications provide a richer experience for smart devices users running Apple iOS or other mobile platforms. Oracle ADF Mobile protects Oracle customers from technology shifts by adopting a metadata-based development framework that enables developer to develop one app (using Oracle JDeveloper), and deploy to multiple device platforms (starting with iOS and Android).  Oracle ADF Mobile also enables IT organizations to leverage existing expertise in web-based and Java development by adopting a hybrid application architecture that brings together HTML5, Java, and device native container: HTML5 allows developer to deliver device-native user experiences while maintaining portability across different platforms Java allows developers to create modules to support business logic and data services Native container provides integration into device services such as camera, contacts, etc All these technologies are packaged into a development framework that supports declarative application development through Oracle JDeveloper. ADF Mobile also provides out of box integratoin with key Fusion Middleware components, such as SOA Suite and Business Process Management (BPM). Oracle Fusion Middleware provides the necessary infrastructure to extend business processes and services to the mobile device -- enabling the mobile user to participate in human tasks – without the additional “mobile middleware” layer. When coupled with Oracle SOA Suite, this combination can execute business transactions on Oracle E-Business Suite (or any Oracle Application). Demo Use Case: Mobile E-Business Suite (iExpense) Approvals Using an employee expense approval scenario, we illustrate how to use Oracle Fusion Middleware and Oracle ADF Mobile to build application extensions that integrate intelligently with Oracle Applications (For example, E-Business Suite). Building these extensions using Oracle Fusion middleware and ADF makes modifications simple, quick to implement, and easy to maintain/upgrade. As described earlier, this approach also extends Fusion Middleware to mobile users without the additional "Mobile Middleware" layer. The approver is presented with a list of expense reports that have been submitted for approval. These expense reports are retrieved from the backend E-Business Suite and displayed on the mobile device. Approval (or rejection) of the expense report kicks off the workflow in E-Business Suite and takes it to completion. The demo also shows how to integrate with native device services such as email, contacts, BI dashboards as well as a prebuilt PDF viewer (this is especially useful in the expense approval scenario, as there is often a need for the approver to access the submitted receipts). Summary Oracle recommends Fusion Middleware as the application integration platform to deliver critical enterprise data and processes to mobile applications.  Pre-built connectors between Fusion Middleware and Applications greatly accelerates the integration process.  Instead of building individual integration points between mobile applications and individual enterprise applications, Oracle Fusion Middleware enables IT organizations to leverage a common platform to support both desktop and mobile application.  Additional Information Product Information on Oracle.com: Oracle Fusion Middleware Follow us on Twitter and Facebook Subscribe to our regular Fusion Middleware Newsletter

  Read the article

• Conversion of BizTalk Projects to Use the New WCF-SAP Adaptor

  - by Geordie

  We are in the process of upgrading our BizTalk Environment from BizTalk 2006 R2 to BizTalk 2010. The SAP adaptor in BizTalk 2010 is an all new and more powerful WCF-SAP adaptor. When my colleagues tested out the new adaptor they discovered that the format of the data extracted from SAP was not identical to the old adaptor. This is not a big deal if the structure of the messages from SAP is simple. In this case we were receiving the delivery and invoice iDocs. Both these structures are complex especially the delivery document. Over the past few years I have tweaked the delivery mapping to remove bugs from original mapping. The idea of redoing these maps did not appeal and due to the current work load was not even an option. I opted for a rather crude alternative of pulling in the iDoc in the new typed format and then adding a static map at the start of the orchestration to convert the data to the old schema.  Note WCF-SAP data formats (on the binding tab of the configuration dialog box is the ‘RecieiveIdocFormat’ field): Typed:  Returns a XML document with the hierarchy represented in XML and all fields being represented by XML tags. RFC: Returns an XML document with the hierarchy represented in XML but the iDoc lines in flat file format. String: This returns the iDoc in a format that is closest to the original flat file format but is still wrapped with some top level XML tags. The files also contained some strange characters at the end of each line. I started with the invoice document and it was quite straight forward to add the mapping but this is where my problems started. The orchestrations for these documents are dynamic and so require the identity of the partner to be able to correctly configure the orchestration. The partner identity is in the EDI_DC40 segment of the iDoc. In the old project the RECPRN node of the segment was promoted. The code to set a variable to the partner ID was now failing. After lot of head scratching I discovered the problem was due to the addition of Namespaces to the fields in the EDI_DC40 segment. To overcome this I needed to use an xPath query with a Namespace Manager. This had to be done in custom code. I now tried to repeat the process with the delivery document. Unfortunately when we tried to get sample typed data from SAP an exception was thrown. The adapter "WCF-SAP" raised an error message. Details "Microsoft.ServiceModel.Channels.Common.XmlReaderGenerationException: The segment or group definition E2EDKA1001 was not found in the IDoc metadata. The UniqueId of the IDoc type is: IDOCTYP/3/DESADV01/ZASNEXT1/640. For Receive operations, the SAP adapter does not support unreleased segments.   Our guess is that when the WCF-SAP adaptor tries to down load the data it retrieves a data schema from SAP. For some reason the schema does not match the data. This may be due to the version of SAP we are running or due to a customization. Either way resolving this problem did not look easy. When doing some research on this problem I found an article showing me how to get the data from SAP using the WCF-SAP adaptor without any XML tags. http://blogs.msdn.com/b/adapters/archive/2007/10/05/receiving-idocs-getting-the-raw-idoc-data.aspx Reproduction of Mustansir blog: Since the WCF based SAP Adapter is ... well, WCF based, all data flowing in and out of the adapter is encapsulated within a SOAP message. Which means there are those pesky xml tags all over the place. If you want to receive an Idoc from SAP, you can receive it in "Typed" format (in which case each column in each segment of the idoc appears within its own xml tag), or you can receive it in "String" format (in which case there are just 2 xml tags at the top, the raw xml data in string/flat file format, and the 2 closing xml tags). In "String" format, an incoming idoc (for ORDERS05, containing 5 data records) would look like: <ReceiveIdoc ><idocData>EDI_DC40 8000000000001064985620 E2EDK01005 800000000000106498500000100000001 E2EDK14 8000000000001064985000002000000020111000 E2EDK14 8000000000001064985000003000000020081000 E2EDK14 80000000000010649850000040000000200710 E2EDK14 80000000000010649850000050000000200600</idocData></ReceiveIdoc> (I have trimmed part of the control record so that it fits cleanly here on one line). Now, you're only interested in the IDOC data, and don't care much for the XML tags. It isn't that difficult to write your own pipeline component, or even some logic in the orchestration to remove the tags, right? Well, you don't need to write any extra code at all - the WCF Adapter can help you here! During the configuration of your one-way Receive Location using WCF-Custom, navigate to the Messages tab. Under the section "Inbound BizTalk Messge Body", select the "Path" radio button, and: (a) Enter the body path expression as: /*[local-name()='ReceiveIdoc']/*[local-name()='idocData'] (b) Choose "String" for the Node Encoding. What we've done is, used an XPATH to pull out the value of the "idocData" node from the XML. Your Receive Location will now emit text containing only the idoc data. You can at this point, for example, put the Flat File Pipeline component to convert the flat text into a different xml format based on some other schema you already have, and receive your version of the xml formatted message in your orchestration.   This was potentially a much easier solution than adding the static maps to the orchestrations and overcame the issue with ‘Typed’ delivery documents. Not quite so fast… Note: When I followed Mustansir’s blog the characters at the end of each line disappeared. After configuring the adaptor and passing the iDoc data into the original flat file receive pipelines I was receiving exceptions. There was a failure executing the receive pipeline: "PAPINETPipelines.DeliveryFlatFileReceive, CustomerIntegration2.PAPINET.Pipelines, Version=1.0.0.0, Culture=neutral, PublicKeyToken=4ca3635fbf092bbb" Source: "Pipeline " Receive Port: "recSAP_Delivery" URI: "D:\CustomerIntegration2\SAP\Delivery\*.xml" Reason: An error occurred when parsing the incoming document: "Unexpected data found while looking for: 'Z2EDPZ7' The current definition being parsed is E2EDP07GRP. The stream offset where the error occured is 8859. The line number where the error occured is 23. The column where the error occured is 0.". Although the new flat file looked the same as the old one there was a differences. In the original file all lines in the document were exactly 1064 character long. In the new file all lines were truncated to the last alphanumeric character. The final piece of the puzzle was to add a custom pipeline component to pad all the lines to 1064 characters. This component was added to the decode node of the custom delivery and invoice flat file disassembler pipelines. Execute method of the custom pipeline component: public IBaseMessage Execute(IPipelineContext pc, IBaseMessage inmsg) { //Convert Stream to a string Stream s = null; IBaseMessagePart bodyPart = inmsg.BodyPart;   // NOTE inmsg.BodyPart.Data is implemented only as a setter in the http adapter API and a //getter and setter for the file adapter. Use GetOriginalDataStream to get data instead. if (bodyPart != null) s = bodyPart.GetOriginalDataStream();   string newMsg = string.Empty; string strLine; try { StreamReader sr = new StreamReader(s); strLine = sr.ReadLine(); while (strLine != null) { //Execute padding code if (strLine != null) strLine = strLine.PadRight(1064, ' ') + "\r\n"; newMsg += strLine; strLine = sr.ReadLine(); } sr.Close(); } catch (IOException ex) { throw new Exception("Error occured trying to pad the message to 1064 charactors"); }   //Convert back to stream and set to Data property inmsg.BodyPart.Data = new MemoryStream(Encoding.UTF8.GetBytes(newMsg)); ; //reset the position of the stream to zero inmsg.BodyPart.Data.Position = 0; return inmsg; }

  Read the article

• Running TeamCity from Amazon EC2 - Cloud based scalable build and continuous Integration

  - by RoyOsherove

  I’ve been having fun playing with the amazon EC2 cloud service. I set up a server running TeamCity, and an image of a server that just runs a TeamCity agent. I also setup TeamCity  to automatically instantiate agents on EC2 and shut them down based upon availability of free agents. Here’s how I did it: The first step was setting up the teamcity server. Create an account on amazon EC2 (BTW, amazon’s sites works better in IE than it does in chrome.. who knew!?) Open the EC2 dashboard, and click “Launch Instance” . From the “Quick Start” tab I selected from the list: “Getting Started on Microsoft Windows Server 2008 (AMI Id: ami-c5e40dac)” .  it’s good enough to just run teamcity. In the instance details, I used the default (Small instance, 1.7 GB mem). You might want to choose a close availability zone based on where you are. We want to “Launch instances” so click continue. Select the default kernel, RAM disk and all. No need to enable monitoring for now (you can do that later). click continue. If you don’t have a key pair, you will be prompted to create one. Once you do, select it in the list. Now you’ll be prompted to create a security group. I named mine “TC” as in “TeamCity”. each group is a bunch of settings on which ports can be let through into and out of a hosted machine.  keep it as the default settings. We will change them later. Click continue,  review and then click “Launch”. Now you’ll be able to see the new instance in the running instances list on your site. Now, you need to install stuff on that instance (TeamCity!) . To do that, you’ll need to Remote desktop into that instance. To do that, we’ll get the admin password for that instance: Check it on the list, and click “Instance Actions” - “Get Windows Admin Password”. You might have to wait about 10 minutes or so for the password to be generated for you. Once you have the password, you will remote desktop (start-run-‘mstsc’) into the instance. It’s address is a dns address shown below the list under “Public DNS”. it looks something like: ec2-256-226-194-91.compute-1.amazonaws.com Once you’re inside the instance – you’ll need to open IE (it is in hardened mode so you’ll have to relax its security settings to download stuff). I first downloaded chrome and using chrome I downloaded TeamCity. Note that the download speed is FAST. several MBs per second. To be able to see TeamCity from the outside, you will need to open the advanced firewall settings inside the remote machine, and add incoming and outgoing rules for port 80 (HTTP). Once you do that, you should be able to see the machine from the outside. If you still can’t, see the next step. I also enabled ports 9090 since I will use this machine to create an agent image later as well. Now configure the security group (TC) to enable talking to agents: IN the EC2 dashboard click on “Security Groups” and select your group. To add a rule, click on the empty list under the ‘protocol’ header. select TCP. from and ‘to’ ports are 9090. source ip is 0.0.0.0/0 (every ip is allowed). click “Save.  Also make sure you can see “HTTP” tcp 80 in that list. if you can’t see it, add it or you won’t be able to browse to the machine’s teamcity server home page. I also set an elastic IP for the machine: so I always have the same IP for the machine instance. Allocate and set one through the”Elastic IP” link on the EC2 dashboard.   you should now have a working instance of teamcity.   Now let’s create an agent image. Repeat steps 1-9, but this time, make sure you select a machine that fits what an agent might do. I selected Instance type – Hihg-CPU medium machine,  that is much faster. On that machine, I installed what I needed (VS 2010, PostSharp etc..). downloading VS 2010 from MSDN (2 GB took less than 10 min!) Now, instead of installing teamcity, browse using the browser to the teamcity homepage (from within the remote machine). go to the Administration page, and click the upper right link “Install agents”. Install the agent on he local machine – set it to the IP or DNS of the running TeamCity server. That way you’ll be able to check their connectivity live before making this machine your official agent image to reuse. Once the agent is installed, see that the TC server can see it and use it. see steps 13-14 above if they can’t. Once it works, you can take steps to make this image your agent image to be reused. next, here is a copy-paste of several steps to take from http://confluence.jetbrains.net/display/TCD5/Setting+Up+TeamCity+for+Amazon+EC2 Configure system so that agent it is started on machine boot (and make sure TeamCity server is accessible on machine boot). Test the setup by rebooting machine and checking that the agent connects normally to the server. Prepare the Image for bundling: Remove any temporary/history information in the system. Stop the agent (under Windows stop the service but leave it in Automatic startup type) Delete content agent logs and temp directories (not necessary) Delete "<Agent Home>/conf/amazon-*" file (not necessary) Change config/buildAgent.properties to remove properties: name, serverAddress, authToken (not necessary)   Now, we need to: Make AMI from the running instance. Configure TeamCity EC2 support on TeamCity server. Making an AMI: Check the instance of the agent in the EC2 dashboard instance list, and select instance actions->Create Image (EBS AMI) you’ll see the image pending in the APIs list in the EC2 dashboard. this could take 30 minutes or more. meanwhile we can configure the could support in the teamcity server. COPY THE AMI ID to the clipboard (looks like ami-a88aa4ce) Configuring TeamCity for Cloud: In TeamCity, click on “Agents” and then on “Cloud” tab. this is where you will control your cloud agents. to configure new cloud agents based on APIs, click on the right link to the “configuration page” Create a new profile and select AMazon EC2 as cloud type. Use your AMI ID that you copied to the clipboard into the “Images” field. Select an availability zone that is the same as the one your instance is running on for best communication perf between them make sure you select the ‘TC’ security group hopefully, that should be it, and teamcity will try to instantiate new instances on demand. Note that it may take around 10 minutes for an agent to become available to teamcity from the time it’s started.

  Read the article

• VS.NET 2010 SP1, Win 7, Parallels, and a MBP&ndash;Hell, my friends&hellip;HELL!

  - by D'Arcy Lussier

  LightSwitch Beta 2 is out. That’s how all this started. All I wanted was to install it on my MBP’s Win7 Parallels VM. But as I’m finding with running a Win7 VM on a MBP, nothing is as easy as it should be. First my MBP froze during the SP1 installation. Not my VM crashing, the entire machine freezing…no mouse, nothing. Had to do a hard reset. BLECH. Then we’re back and I try to re-install SP1 (since the first try obviously failed). I get met with a dialog asking me where silverlight_sdk.msi was. It was *nowhere*! So I hit the net and download it from Microsoft’s site. Unfortunately, it only downloads an exe and not the individual files which would include the msi. Here’s what I did: - Download the tools for Silverlight 4 (http://www.microsoft.com/downloads/en/details.aspx?FamilyID=b3deb194-ca86-4fb6-a716-b67c2604a139&displaylang=en) - Run it, but don’t hit the install or next button when the dialog comes up - Look in your file structure for a folder with a weird name…bunch of numbers and letters. This is a temp folder that the exe creates and dumps all the necessary setup files into, and clears away after its done. - Inside this folder you’ll find the silverlight_sdk.msi (hooray!). Just copy it to a different location on the C drive. You can then cancel installation. Ok, so that takes care of that…but then running the SP1 installer I get hit with *another* dialog asking for the WCF RIA Services SP1 msi. Now it looks like this MSI is part of the Silverlight Tools package because you’ll see the MSI, but the VS.NET 2010 SP1 installer will thumb its nose at this unworthy msi…for whatever reason. So instead, go here: http://www.silverlight.net/getstarted/riaservices/ …and click on the “Install WCF Ria Services Sp1…” option. This downloads the msi, which you should save to your C drive and direct the VS.NET 2010 SP1 installer to. Then, if you’ve done all that, been good all year, and not made any little children cry, you *might* just be able to install VS.NET 2010 SP1 on your Parallels VM. If you were playing that “Take a shot every time he writes VS.NET 2010 Sp1” drinking game, then you’re drunk…which is a better place to be than where I am right now: watching the installation progress bar slowly creep to completion, hoping there’s no more surprises in store. D

  Read the article

• Use Autoruns to Manually Clean an Infected PC

  - by Mark Virtue

  There are many anti-malware programs out there that will clean your system of nasties, but what happens if you’re not able to use such a program?  Autoruns, from SysInternals (recently acquired by Microsoft), is indispensable when removing malware manually. There are a few reasons why you may need to remove viruses and spyware manually: Perhaps you can’t abide running resource-hungry and invasive anti-malware programs on your PC You might need to clean your mom’s computer (or someone else who doesn’t understand that a big flashing sign on a website that says “Your computer is infected with a virus – click HERE to remove it” is not a message that can necessarily be trusted) The malware is so aggressive that it resists all attempts to automatically remove it, or won’t even allow you to install anti-malware software Part of your geek credo is the belief that anti-spyware utilities are for wimps Autoruns is an invaluable addition to any geek’s software toolkit.  It allows you to track and control all programs (and program components) that start automatically with Windows (or with Internet Explorer).  Virtually all malware is designed to start automatically, so there’s a very strong chance that it can be detected and removed with the help of Autoruns. We have covered how to use Autoruns in an earlier article, which you should read if you need to first familiarize yourself with the program. Autoruns is a standalone utility that does not need to be installed on your computer.  It can be simply downloaded, unzipped and run (link below).  This makes is ideally suited for adding to your portable utility collection on your flash drive. When you start Autoruns for the first time on a computer, you are presented with the license agreement: After agreeing to the terms, the main Autoruns window opens, showing you the complete list of all software that will run when your computer starts, when you log in, or when you open Internet Explorer: To temporarily disable a program from launching, uncheck the box next to it’s entry.  Note:  This does not terminate the program if it is running at the time – it merely prevents it from starting next time.  To permanently prevent a program from launching, delete the entry altogether (use the Delete key, or right-click and choose Delete from the context-menu)).  Note:  This does not remove the program from your computer – to remove it completely you need to uninstall the program (or otherwise delete it from your hard disk). Suspicious Software It can take a fair bit of experience (read “trial and error”) to become adept at identifying what is malware and what is not.  Most of the entries presented in Autoruns are legitimate programs, even if their names are unfamiliar to you.  Here are some tips to help you differentiate the malware from the legitimate software: If an entry is digitally signed by a software publisher (i.e. there’s an entry in the Publisher column) or has a “Description”, then there’s a good chance that it’s legitimate If you recognize the software’s name, then it’s usually okay.  Note that occasionally malware will “impersonate” legitimate software, but adopting a name that’s identical or similar to software you’re familiar with (e.g. “AcrobatLauncher” or “PhotoshopBrowser”).  Also, be aware that many malware programs adopt generic or innocuous-sounding names, such as “Diskfix” or “SearchHelper” (both mentioned below). Malware entries usually appear on the Logon tab of Autoruns (but not always!) If you open up the folder that contains the EXE or DLL file (more on this below), an examine the “last modified” date, the dates are often from the last few days (assuming that your infection is fairly recent) Malware is often located in the C:\Windows folder or the C:\Windows\System32 folder Malware often only has a generic icon (to the left of the name of the entry) If in doubt, right-click the entry and select Search Online… The list below shows two suspicious looking entries:  Diskfix and SearchHelper These entries, highlighted above, are fairly typical of malware infections: They have neither descriptions nor publishers They have generic names The files are located in C:\Windows\System32 They have generic icons The filenames are random strings of characters If you look in the C:\Windows\System32 folder and locate the files, you’ll see that they are some of the most recently modified files in the folder (see below) Double-clicking on the items will take you to their corresponding registry keys: Removing the Malware Once you’ve identified the entries you believe to be suspicious, you now need to decide what you want to do with them.  Your choices include: Temporarily disable the Autorun entry Permanently delete the Autorun entry Locate the running process (using Task Manager or similar) and terminating it Delete the EXE or DLL file from your disk (or at least move it to a folder where it won’t be automatically started) or all of the above, depending upon how certain you are that the program is malware. To see if your changes succeeded, you will need to reboot your machine, and check any or all of the following: Autoruns – to see if the entry has returned Task Manager (or similar) – to see if the program was started again after the reboot Check the behavior that led you to believe that your PC was infected in the first place.  If it’s no longer happening, chances are that your PC is now clean Conclusion This solution isn’t for everyone and is most likely geared to advanced users. Usually using a quality Antivirus application does the trick, but if not Autoruns is a valuable tool in your Anti-Malware kit. Keep in mind that some malware is harder to remove than others.  Sometimes you need several iterations of the steps above, with each iteration requiring you to look more carefully at each Autorun entry.  Sometimes the instant that you remove the Autorun entry, the malware that is running replaces the entry.  When this happens, we need to become more aggressive in our assassination of the malware, including terminating programs (even legitimate programs like Explorer.exe) that are infected with malware DLLs. Shortly we will be publishing an article on how to identify, locate and terminate processes that represent legitimate programs but are running infected DLLs, in order that those DLLs can be deleted from the system. Download Autoruns from SysInternals Similar Articles Productive Geek Tips Using Autoruns Tool to Track Startup Applications and Add-onsHow To Get Detailed Information About Your PCSUPERAntiSpyware Portable is the Must-Have Spyware Removal Tool You NeedQuick Tip: Windows Vista Temp Files DirectoryClear Recent Commands From the Run Dialog in Windows XP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more Download Microsoft Office Help tab

  Read the article

• How you can extend Tasklists in Fusion Applications

  - by Elie Wazen

  In this post we describe the process of modifying and extending a Tasklist available in the Regional Area of a Fusion Applications UI Shell. This is particularly useful to Customers who would like to expose Setup Tasks (generally available in the Fusion Setup Manager application) in the various functional pillars workareas. Oracle Composer, the tool used to implement such extensions allows changes to be made at runtime. The example provided in this document is for an Oracle Fusion Financials page. Let us examine the case of a customer role who requires access to both, a workarea and its associated functional tasks, and to an FSM (setup) task.  Both of these tasks represent ADF Taskflows but each is accessible from a different page.  We will show how an FSM task is added to a Functional tasklist and made accessible to a user from within a single workarea, eliminating the need to navigate between the FSM application and the Functional workarea where transactions are conducted. In general, tasks in Fusion Applications are grouped in two ways: Setup tasks are grouped in tasklists available to implementers in the Functional Setup Manager (FSM). These Tasks are accessed by implementation users and in general do not represent daily operational tasks that fit into a functional business process and were consequently included in the FSM application. For these tasks, the primary organizing principle is precedence between tasks. If task "Manage Suppliers" has prerequisites, those tasks must precede it in a tasklist. Task Lists are organized to efficiently implement an offering. Tasks frequently performed as part of business process flows are made available as links in the tasklist of their corresponding menu workarea. The primary organizing principle in the menu and task pane entries is to group tasks that are generally accessed together. Customizing a tasklist thus becomes required for business scenarios where a task packaged under FSM as a setup task, is for a particular customer a regular maintenance task that is accessed for record updates or creation as part of normal operational activities and where the frequency of this access merits the inclusion of that task in the related operational tasklist A user with the role of maintaining Journals in General Ledger is also responsible for maintaining Chart of Accounts Mappings.  In the Fusion Financials Product Family, Manage Journals is a task available from within the Journals Menu whereas Chart of Accounts Mapping is available via FSM under the Define Chart of Accounts tasklist Figure 1. The Manage Chart of Accounts Mapping Task in FSM Figure 2. The Manage Journals Task in the Task Pane of the Journals Workarea Our goal is to simplify cross task navigation and allow the user to access both tasks from a single tasklist on a single page without having to navigate to FSM for the Mapping task and to the Journals workarea for the Manage task. To accomplish that, we use Oracle Composer to customize  the Journals tasklist by adding to it the Mapping task. Identify the Taskflow name and path of the FSM Task The first step in our process is to identify the underlying taskflow for the Manage Chart of Accounts Mappings task. We select to Setup and Maintenance from the Navigator to launch the FSM Application, and we query the task from Manage Tasklists and Tasks Figure 3. Task Details including Taskflow path The Manage Chart of Accounts Mapping Task Taskflow is: /WEB-INF/oracle/apps/financials/generalLedger/sharedSetup/coaMappings/ui/flow /CoaMappingsMainAreaFlow.xml#CoaMappingsMainAreaFlow We copy that value and use it later as a parameter to our new task in the customized Journals Tasklist. Customize the Journals Page A user with Administration privileges can start the run time customization directly from the Administration Menu of the Global Area.  This customization is done at the Site level and once implemented becomes available to all users with access to the Journals Workarea. Figure 4.  Customization Menu The Oracle Composer Window is displayed in the same browser and the Hierarchy of the page component is displayed and available for modification. Figure 5.  Oracle Composer In the composer Window select the PanelFormLayout node and click on the Edit Button.  Note that the selected component is simultaneously highlighted in the lower pane in the browser. In the Properties popup window, select the Tasks List and Task Properties Tab, where the user finds the hierarchy of the Tasklist and is able to Edit nodes or create new ones. src="https://blogs.oracle.com/FunctionalArchitecture/resource/TL5.jpg" Figure 6.  The Tasklist in edit mode Add a Child Task to the Tasklist In the Edit Window the user will now create a child node at the desired level in the hierarchy by selecting the immediate parent node and clicking on the insert node button.  This process requires four values to be set as described in Table 1 below. Parameter Value How to Determine the Value Focus View Id /JournalEntryPage This is the Focus View ID of the UI Shell where the Tasklist we want to customize is.  A simple way to determine this value is to copy it from any of the Standard tasks on the Tasklist Label COA Mapping This is the Display name of the Task as it will appear in the Tasklist Task Type dynamicMain If the value is dynamicMain, the page contains a new link in the Regional Area. When you click the link, a new tab with the loaded task opens Taskflowid /WEB-INF/oracle/apps/financials/generalLedger/sharedSetup/ coaMappings/ui/flow/ CoaMappingsMainAreaFlow.xml#CoaMappingsMainAreaFlow This is the Taskflow path we retrieved from the Task Definition in FSM earlier in the process Table 1.  Parameters and Values for the Task to be added to the customized Tasklist Figure 7.   The parameters window of the newly added Task   Access the FSM Task from the Journals Workarea Once the FSM task is added and its parameters defined, the user saves the record, closes the Composer making the new task immediately available to users with access to the Journals workarea (Refer to Figure 8 below). Figure 8.   The COA Mapping Task is now visible and can be invoked from the Journals Workarea   Additional Considerations If a Task Flow is part of a product that is deployed on the same app server as the Tasklist workarea then that task flow can be added to a customized tasklist in that workarea. Otherwise that task flow can be invoked from its parent product’s workarea tasklist by selecting that workarea from the Navigator menu. For Example The following Taskflows  belong respectively to the Subledger Accounting, and to the General Ledger Products.  /WEB-INF/oracle/apps/financials/subledgerAccounting/accountingMethodSetup/mappingSets/ui/flow/MappingSetFlow.xml#MappingSetFlow /WEB-INF/oracle/apps/financials/generalLedger/sharedSetup/coaMappings/ui/flow/CoaMappingsMainAreaFlow.xml#CoaMappingsMainAreaFlow Since both the Subledger Accounting and General Ledger products are part of the LedgerApp J2EE Applicaton and are both deployed on the General Ledger Cluster Server (Figure 8 below), the user can add both of the above taskflows to the  tasklist in the  /JournalEntryPage FocusVIewID Workarea. Note:  both FSM Taskflows and Functional Taskflows can be added to the Tasklists as described in this document Figure 8.   The Topology of the Fusion Financials Product Family. Note that SubLedger Accounting and General Ledger are both deployed on the Ledger App Conclusion In this document we have shown how an administrative user can edit the Tasklist in the Regional Area of a Fusion Apps page using Oracle Composer. This is useful for cases where tasks packaged in different workareas are frequently accessed by the same user. By making these tasks available from the same page, we minimize the number of steps in the navigation the user has to do to perform their transactions and queries in Fusion Apps.  The example explained above showed that tasks classified as Setup tasks, meaning made accessible to implementation users from the FSM module can be added to the workarea of their respective Fusion application. This eliminates the need to navigate to FSM to access tasks that are both setup and regular maintenance tasks. References Oracle Fusion Applications Extensibility Guide 11g Release 1 (11.1.1.5) Part Number E16691-02 (Section 3.2) Oracle Fusion Applications Developer's Guide 11g Release 1 (11.1.4) Part Number E15524-05

  Read the article

• Oracle Launches New Oracle Database 12c Administrator Certifications

  - by Brandye Barrington

  Today Oracle University announces the release of new Oracle Database 12c Administrator certifications. The new Oracle Database 12c certifications emphasize the foundational and advanced skills needed by Database Administrators and will prepare DBAs to leverage powerful new management and consolidation capabilities, resulting in an even more valuable credential for customers and partners. ORACLE CERTIFIED ASSOCIATE (OCA)  The Oracle Certified Associate (OCA) for Oracle Database 12c objectives measure IT professionals' mastery of day-to-day administration skills and their ability to manage the challenges they're likely to encounter on the job. This credential focuses on SQL skills, operational administration of the Oracle Database including performance and space management, and installing, patching and upgrading the Oracle Database. Earning the OCA credential requires successful completion of two exams: 1Z0-061 - Oracle Database 12c: SQL Fundamentals and 1Z0-062 - Oracle Database 12c: Installation and Administration. The OCA certification track also allows for several alternate exams which can be substituted for 1Z0-061. ORACLE CERTIFIED PROFESSIONAL (OCP) Building on the competencies in the Oracle Database 12c OCA certification, the Oracle Certified Professional (OCP) for Oracle Database 12c certification includes advanced knowledge and skills required of top-performing database administrators. The OCP credential focuses on developing and implementing backup and recovery strategies, designing consolidation strategies to exploit multitenant container and pluggable databases, and thorough understanding how CDB/PDBs fit into the DBaaS cloud-computing model. Today, Oracle is releasing 1Z0-060 - Upgrade to Oracle Database 12c, which allows Oracle Certified Professionals with credentials in Oracle 9i, Oracle Database 10g or Oracle Database 11g to upgrade to Oracle Database 12c with a single exam. The upgrade exam focuses on designing consolidation strategies to exploit multitenant container and pluggable databases, implementing Oracle 12c feature-rich ILM support, optimizing SQL execution using dynamic swapping of sub plans, implementing real-time data redaction within databases, as well as exploiting many additional performance, backup and recovery, security and partitioning enhancements. The exam also includes a thorough review of core DBA skills. Visit the OCP certification track for more details on the new upgrade exam as well as alternate certification paths. ORACLE CERTIFIED MASTER (OCM) The Oracle Certified Master (OCM) for Oracle Database 12c - a very challenging and elite top-level certification - certifies the most highly skilled and experienced database experts. Further information on the 12c OCM level will be announced as exam development concludes. To date, there have been more than 1.6 million Oracle certifications granted worldwide. Explore these certification tracks, exam requirements and objectives, and start toward earning your exciting new Oracle Database 12c certification credentials from Oracle.

  Read the article

• Passing text message to web page from web user control

  - by Narendra Tiwari

  Here is a brief summary how we can send a text message to webpage by a web user control. Delegates is the slolution. There are many good articles on .net delegates you can refer some of them below. The scenario is we want to send a text message to the page on completion of some activity on webcontrol. 1/ Create a Base class for webcontrol (refer code below), assuming we are passing some text messages to page from web user control  - Declare a delegate  - Declare an event of type delegate using System; using System.Data; using System.Configuration; using System.Web; using System.Web.Security; using System.Web.UI; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Web.UI.HtmlControls; //Declaring delegate with message parameter public delegate void SendMessageToThePageHandler(string messageToThePage); public         } class ControlBase: System.Web.UI.UserControl { public ControlBase() { // TODO: Add constructor logic here }protected override void OnInit(EventArgs e) { base.OnInit(e); }private string strMessageToPass;/// <summary> /// MessageToPass - Property to pass text message to page /// </summary> public string MessageToPass { get { return strMessageToPass; } set { strMessageToPass = value; } }/// <summary> /// SendMessageToPage - Called from control to invoke the event /// </summary> /// <param name="strMessage">Message to pass</param> public void SendMessageToPage(string strMessage) {   if (this.sendMessageToThePage != null)       this.sendMessageToThePage(strMessage); } 2/ Register events on webpage on page Load eventthis.AddControlEventHandler((ControlBase)WebUserControl1); this.AddControlEventHandler((ControlBase)WebUserControl2); /// <summary> /// AddControlEventHandler- Hooking web user control event /// </summary> /// <param name="ctrl"></param> private void AddControlEventHandler(ControlBase ctrl) { ctrl.sendMessageToThePage += delegate(string strMessage) {   //display message   lblMessage.Text = strMessage; }; } References: http://www.akadia.com/services/dotnet_delegates_and_events.html     3/

  Read the article

• What's new in the RightNow November 2012 release?

  - by Richard Lefebvre

  What new in the RightNow November 2012? In order to find out, please watch this tutorial with imbedded demonstration or read the November 2012 Release notes.   News Facts The November 2012 release of     Oracle’s RightNow CX Cloud Service marks the completion of development efforts for 2012 and continues Oracle’s commitment to enhancing the Oracle RightNow offering following the acquisition. New release delivers key capabilities designed to help organizations improve customer experiences in order to increase customer acquisition and retention, while reducing total cost of ownership. Part of the Oracle Cloud, Oracle RightNow CX Cloud Service now integrates Oracle RightNow Chat Cloud Service with Oracle Engagement Engine Cloud Service, helping organizations intelligently and proactively engage with customers through the right channel at the right time. Chat solutions have emerged as an important component of a cross-channel customer experience strategy. According to Forrester Research, Inc., chat adoption has risen dramatically between 2009 and 2011 from 19% to 37%, and it has the highest satisfaction level of all customer service channels at 62% satisfaction. (*) To help companies deliver enhanced customer experiences, Oracle has made significant investments in Oracle RightNow Chat Cloud Service throughout 2012. With the addition of rules-based engagement to existing capabilities such as co-browse, mobile chat, and cross-channel knowledge integration with the contact center, all delivered via the cloud, Oracle RightNow Chat Cloud Service is differentiated as the industry-leading chat solution. The Oracle Cloud offers a broad portfolio of software as-a-service applications, including Oracle Customer Service and Support Cloud Service, which is based on the Oracle RightNow CX Cloud Service. New Capabilities Key Oracle RightNow Chat Cloud Service and other cross-channel capabilities include: Chat Business Rules, with over 70 built-in rule conditions, leverage the Oracle Engagement Engine to help enable organizations capture rich visitor data and invoke complex actions and triggers. Chat Business Rules allow granular control over when to engage a customer via the chat channel based on customer behavior, customer profile information and operational information. Click-to-Call provides the option for a customer to engage with a live agent over the phone during the Web browsing experience. Chat Availability Controls provide organizations with the ability to throttle volume through the chat channel based on real-time agent availability and wait time thresholds. This ability to manage the channel more efficiently allows organizations to provide a better experience to customers using the chat channel. Strategic and Operational Chat Channel Analytics provide better insight into channel and agent productivity and utilization and effectiveness with both out-of-the-box reports and ad hoc reports. New chat channel analytics provide comprehensive metrics with full data transparency. Background Service Updates improve high availability metrics for Oracle RightNow Chat Cloud Service during service update periods, setting the industry leading standard for sales and service delivery to customers via the chat channel. Additional Capabilities include: Improved Web developer tools for more efficient self-service user interface design Improved administration for enhanced user sessions management Increased cross-channel community collaboration Enhanced extensibility widgets and syndication management Streamlined content management and analytics capabilities Read the full announcement here

  Read the article

• Dart and NetBeans IDE 7.4

  - by Geertjan

  Here's the start of Dart in NetBeans IDE. Basic Dart editing support is done and on saving a Dart file the related JavaScript files are automatically generated. In the context of an HTML5 application in NetBeans IDE, that gives you deep integration with the embedded browser and, even better, Chrome, as well as Chrome Developer Tools. Below, notice that the "Sunflower Spectacular" H1 element is selected (click the image to enlarge it to get a better view), which is therefore highlighted in the live DOM view in the bottom left, as well as in the CSS Styles window in the top right, from where the CSS styles can be edited and from where the related files can be opened in the IDE. Identical features are available for Chrome, as well as on Android and iOS. And if you like that, watch this YouTube movie showing how Chrome Developer Tools integration can fit directly into the workflow below. Anyone want to help get this plugin further? What's needed: Much deeper Dart editing support, i.e., right now only very basic syntax coloring is provided, i.e., an ANTLR lexer is integrated into the NetBeans syntax coloring infrastructure. Parsing, error checking, code completion, and some small code templates are needed. A new panel is needed in the Project Properties dialog on NetBeans HTML5 projects for enabling Dart (i.e., similar to enabling Cordova), at which point the "dart.js" file and other Dart artifacts should be added to the project, so that a Dart project is immediately generated and the application should be immediately deployable. Whenever changes are made to a Dart file, Dart should run in the background to create the Dart artifacts in some hidden way, so that the user doesn't see all the Dart artifacts as is currently the case. Some way of recognizing Dart projects (there's a YAML file as an identifier) and creating NetBeans HTML5 projects from that, i.e., from Dart projects outside the IDE. I think that's all... The official Dart Editor is based on Eclipse and requires a massive download of heaps of Eclipse bundles. Compare that to the NetBeans equivalent, which is a very small "HTML5 and PHP" bundle (60 MB), available here, together with the above small Dart plugin. Plus, when you look at how NetBeans IDE integrates with a bunch of Google-oriented projects, i.e., Chrome, Chrome Developer Tools, and Android (via Cordova), that's a pretty interesting toolbox for anyone using Dart. And bear in mind that ANTLRWorks, Microchip, and heaps of other organizations have built and are building their tools on top of NetBeans!

  Read the article

• Developing with Fluid UI – The Fluid Home Page

  - by Dave Bain

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} The first place to start with Fluid UI is with the Fluid Home Page. Sometimes it’s referred to as the landing page, but it’s formally called the Fluid Home Page. It’s delivered with PeopleTools 8.54, and the nice thing about it is, it’s a component. That’s one thing you’ll discover with Fluid UI. Fluid UI is built int PeopleTools with Fluid UI. The Home Page is a component, the tiles or grouplets are group boxes, and the search and prompt pages are just pages. It makes it easy to find things, customize and brand the applications (and of course to see what’s going on) when you can open it in AppDesigner. To see what makes a component fluid, let’s start with the Fluid Home Page. It’s a component called PT_LANDINGPAGE. You can open it in AppDesigner and see what’s unique and different about Fluid UI. If you open the Component Properties dialog, you’ll see a new tab called Fluid On the Component Properties Fluid tab you’ll see the most important checkbox of all, Fluid Mode. That is the one flag that will tell PeopleSoft if the component is Fluid (responsive, dynamic layout) or classic (pixel perfect). Now that you know it’s a single flag, you know that a component can’t be both Fluid UI and Classic at the same time, it’s one or the other. There are some other interesting fields on this page. The Small Form Factor Optimized field tells us whether or not to display this on a small device (think smarphone). Header Toolbar Actions offer standard options that are set at the component level so you have complete control of the components header bar. You’ll notice that the PT_LANDINGPAGE has got some PostBuild PeopleCode. That’s to build the grouplets that are used to launch Fluid UI Pages (more about those later). Probably not a good idea to mess with that code! The next thing to look at is the Page Definition for the PT_LANDINGPAGE component. When you open the page PT_LANDINGPAGE it will look different than anything you’ve ever seen. You’re probably thinking “What’s up with all the group boxes”? That is where Fluid UI is so different. In classic PeopleSoft, you put a button, field, group, any control on a page and that’s where it shows up, no questions asked. With Fluid UI, everything is positioned relative to something else. That’s why there are so many containers (you know them as group boxes). They are UI objects that are used for dynamic positioning. The Fluid Home Page has some special behavior and special settings. The first is in the Web Profile Configuration settings (Main Menu->PeopleTools->Web Profile->Web Profile Configuration from the main menu). There are two checkboxes that control the behavior of Fluid UI. Disable Fluid Mode and Disable Fluid On Desktop. Disable Fluid Mode prevents any Fluid UI component from being run from this installation. This is a web profile setting for users that want to run later versions of PeopleTools but only want to run Classic PeopleSoft pages. The second setting, Disable Fluid On Desktop allows the Fluid UI to be run on mobile devices such as smartphones and tablets, but prevents Fluid UI from running on a desktop computer. Fluid UI settings are also make in My Personalizations (Main Menu->My Personalizations from the Main Menu), in the General Options section. In that section, each user has the choice to determine the home page for their desktop and for tablets. Now that you know the Fluid UI landing page is just a component, and the profile and personalization settings, you should be able to launch one. It’s pretty easy to add a menu using Structure and Content, just make sure the proper security is set up. You’ll have to run a Fluid UI supported browser in order to see it. Latest versions of Chrome, Firefox and IE will do. Check the certification page on MOS for all the details. When you open the first Fluid Landing Page, there’s not much there. Not to worry, we’ll get some content on it soon. Take a moment to navigate around and look at some of the header actions that were set up from the component properties. The home button takes you back to the classic system. You won’t see any notifications and the personalization doesn’t have any content to add. The NavBar icon on the top right has a lot of content, including a Navigator and Classic home. Spend some time looking through what’s available. Stay tuned for more. Next up is adding some content. Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:8.0pt; mso-para-margin-left:0in; line-height:107%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Monitoring Your Servers

  - by Grant Fritchey

  If you are the DBA in a large scale enterprise, you’re probably already monitoring your servers for up-time and performance. But if you work for a medium-sized business, a small shop, or even a one-man operation, chances are pretty good that you’re not doing that sort of monitoring. You know that you’re supposed to be doing it, but other things, more important at-the-moment things, keep getting in the way. After all, which is more important, some monitoring or backup testing?  Backup testing, of course. Monitoring is frequently one of those things that you do when can get around to it.  Well, as you can see at the right, I have your round tuit ready to go. What if I told you that you could get monitoring on your servers for up-time, job completion, performance, all the standard stuff? And what if I told you that you wouldn’t need to install and configure another server in your environment to get it done? And what if I told you that you’d be able to set up and customize your alerts so you could know if your server was offline or a drive was full? Almost nothing for you to do, and you’ll have a full-blown monitoring process. Sounds to good to be true doesn’t it? Well, it’s coming. We’re creating an online, remote, monitoring system here at Red Gate. You’ll be able to use our SQL Monitor tool (which you can see here, monitoring SQL Server Central in real time) to keep track of your systems, but without having to set up a server and a database for storing the information collected. Instead, we’re taking advantage of services available through the internet to enable collection and storage of this information remotely, off your systems. All you have to do is install a piece of software that will communicate between our service and your servers and you’ll be off and running. It’s that easy. Before you get too excited, let me break the news that this is the near future I’m talking about. We’re setting up the program and there’s a sign-up you can use to get in on the initial tests.

  Read the article

• Making the WPeFfort

  - by Laila

  Microsoft Visual Studio 2010 will be launched on April 12th. The basic layout looks pretty much as it did, so it is not immediately obvious on first inspection that it was completely rewritten in the Windows Presentation Foundation (WPF). The current VS 2008 codebase had reached the end of its life; It was getting slow to initialize and sluggish to run, and was never going to allow for multi-monitor support or easier extensibility. It can't have been an easy decision to rewrite Visual Studio, but the gamble seems to have paid off. Although certain bugs in the betas caused some anxiety about performance, these seem to have been fixed, and the new Visual Studio is definitely faster. In rewriting the codebase, it has been possible to make obvious improvements, such as being able to run different windows on different monitors, and you only being presented with the Toolbox controls and References that are appropriate to your target .NET version. There is also an IntelliTrace debugger, and Intellisense has been improved by virtue of separating a 'Suggestion Mode' and 'Completion Mode' (with its 'Generate From.' 'Highlight References.', and 'Navigate to...' features). At the same time, there has been quite a clearout; Certain features that had been tucked away in the previous versions, such as Brief or Emacs emulation support, have been dropped. (Yes, they were being used!) There are a lot of features that didn't require the rewrite, but are welcome. It is now easier to develop WPF applications (e.g. drag-and-drop Databinding), and there is support for Azure. There are more, and better templates and the design tools are greatly improved (e.g. Expression Web, Expression Blend, WPF Sketchflow, Silverlight designer, Document Map Margin and Inline Call Hierarchy). Sharepoint is better supported, and Office apps will benefit from C#'s support of optional and named arguments, and allowing several Office Solutions within a Deployment package. Most importantly, it is a vote of confidence in the WPF. VS 2010 is the essential missing component that has been impeding the faster adoption of WPF. The fact that it is actually now written in WPF should now reassure the doubters, and convince more developers to make the move from WinForms to WPF. In using WPF, the developers of Visual Studio have had the clout to fix some issues which have been bothering WPF developers for some time (such as blurred text). Do you see a brighter future as a result of transferring from WinForms to WPF? I'd love to know what you think. Cheers, Laila

  Read the article

• Silverlight Cream for November 17, 2011 -- #1168

  - by Dave Campbell

  In this Issue: Colin Eberhardt, Lazar Nikolov, WindowsPhoneGeek, Jesse Liberty, Peter Kuhn, Derik Whittaker, Chris Koenig, and Jeff Blankenburg(-2-). Above the Fold: Silverlight: "Facebook Graph API and Silverlight Part 2 – Publishing data" Lazar Nikolov WP7: "Suppressing Zoom and Scroll interactions in the Windows Phone 7 WebBrowser Control" Colin Eberhardt Metro/WinRT/W8: "Tip/Trick when working with the Application Bar in WinRT/Metro (C#)" Derik Whittaker Shoutouts: Michael Palermo's latest Desert Mountain Developers is up Michael Washington's latest Visual Studio #LightSwitch Daily is up Pete Brown announced the completion of his book: It’s a wrap! I’ve completed writing Silverlight 5 in Action From SilverlightCream.com: Suppressing Zoom and Scroll interactions in the Windows Phone 7 WebBrowser Control Colin Eberhardt's latest post is all about a helper class he wrote to suppress scrolling and pinch zoom of the WP7 browser control, which you might want to do if the browser is placed inside another control. Facebook Graph API and Silverlight Part 2 – Publishing data In this part 2 of his Facebook and Silverlight series, Lazar Nikolov shows how to post data to your profile or your friends' profiles Localizing a Windows Phone app Step by Step WindowsPhoneGeek's latest post is on Localizing a WP7 app .. another great tutorial with plenty of discussion, pictures, and a project to load up and follow Background Audio Part II: Copying Audio Files To Isolated Storage Continuing his WP7 series, Jesse Liberty has Part 2 of a mini-series on Background Audio up... in this episode he's using local audio and to do so, it must be in ISO Silverlight: Bugs in the multicast client In a Q/A session, Peter Kuhn was presented a nasty bug in the multicast client that he has verified exists in not only Silverlight 4 but also Silverlight 5 Beta, including a link to his entry on Connect. Tip/Trick when working with the Application Bar in WinRT/Metro (C#) Derik Whittaker offers up some good information about the Metro Application Bar and how to keep it where you want it New! Windows Phone Starter Kit for Podcasts Chris Koenig announced the release of a new starter kit for WP7... a starter kit for podcasts. Check out the links on Chris' site and the other two starter kits that are available 31 Days of Mango | Day #4: Compass Jeff Blankenburg continues with Day 4 of his Mango series with this post on the Compass and a cool app to demonstrate it 31 Days of Mango | Day #5: Gyroscope In Day 5, Jeff Blankenburg is talking about and discussing the gyroscope, of course if you have a phone as old as mine, you won't have a gyroscope and it's not on the emulator Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Java Certification Exams and Their Move to Pearson VUE

  - by Harold Green

  You may be aware that Oracle recently migrated all Sun-branded certification exams from Prometric to Pearson VUE. Below are answers to some frequently-asked questions that we've been getting recently: What changes to the exams should I be aware of?Only minor changes were made to the exams during the transition to Pearson VUE: Renumbering of all exams to the Oracle exam numbering structure (i.e. 1Z0...). Most exam score reports were enhanced to provide more detailed feedback. Score reports now list every exam objective for which a question (or questions) were answered incorrectly. The previous format provided only section-level performance feedback. For three Java exams, some lengthy (time-consuming) questions were removed & replaced with shorter (less time-consuming) questions. This was done in order to shorten the required exam time (to 150 minutes). Some interactive question types were removed from several Java and Solaris exams (including "matching" and "drag-and-drop" questions). The passing scores (for the exams that were revised) were statistically adjusted to make them equal to their prior passing scores, thus ensuring that the exams maintained the same level of difficulty as before. The exam objectives and the exam questions themselves did not change. Candidates should study the same material and objectives. Are there also new testing practices I should be aware of?Oracle follows a common industry practice of placing occasional un-scored questions on our certification exams. Candidates will not know which questions are unscored. At the time of this blog post, only one of the migrated exams (1Z0-898) contains unscored questions.I started the Master certification path through Prometric, and now I need to complete the requirements through Pearson VUE. Where can I get guidance on this process?Visit our Vendor Transition FAQs to find comprehensive instructions. Oracle has created several specific paths to accommodate candidates who were at at varying stages of completion of their master path when the transition occurred. Make sure to follow the specific path designed for your case, as you will need to know which exam number to select in order to submit/re-submit your requirements. QUICK LINKS Oracle Certification Blog Post: Java, Oracle Solaris, MySQL and Other Former Sun Certification Exams Now Being Delivered At Pearson VUE Oracle Certification Website: Vendor Transition Announcement

  Read the article

• Using SSIS to send a HTML E-Mail Message with built-in table of Counts.

  - by Kevin Shyr

  For the record, this can be just as easily done with a .NET class with a DLL call.  The two major reasons for this ending up as a SSIS package are: There are a lot of SQL resources for maintenance, but not as many .NET developers. There is an existing automated process that links up SQL Jobs (more on that in the next post), and this is part of that process.   To start, this is what the SSIS looks like: The first part of the control flow is just for the override scenario.   In the Execute SQL Task, it calls a stored procedure, which already formats the result into XML by using "FOR XML PATH('Row'), ROOT(N'FieldingCounts')".  The result XML string looks like this: <FieldingCounts>   <Row>     <CellId>M COD</CellId>     <Mailed>64</Mailed>     <ReMailed>210</ReMailed>     <TotalMail>274</TotalMail>     <EMailed>233</EMailed>     <TotalSent>297</TotalSent>   </Row>   <Row>     <CellId>M National</CellId>     <Mailed>11</Mailed>     <ReMailed>59</ReMailed>     <TotalMail>70</TotalMail>     <EMailed>90</EMailed>     <TotalSent>101</TotalSent>   </Row>   <Row>     <CellId>U COD</CellId>     <Mailed>91</Mailed>     <ReMailed>238</ReMailed>     <TotalMail>329</TotalMail>     <EMailed>291</EMailed>     <TotalSent>382</TotalSent>   </Row>   <Row>     <CellId>U National</CellId>     <Mailed>63</Mailed>     <ReMailed>286</ReMailed>     <TotalMail>349</TotalMail>     <EMailed>374</EMailed>     <TotalSent>437</TotalSent>   </Row> </FieldingCounts>  This result is saved into an internal SSIS variable with the following settings on the General tab and the Result Set tab:   Now comes the trickier part.  We need to use the XML Task to format the XML string result into an HTML table, and I used Direct input XSLT And here is the code of XSLT: <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> <xsl:output method="html" indent="yes"/>   <xsl:template match="/ROOT">         <table border="1" cellpadding="6">           <tr>             <td></td>             <td>Mailed</td>             <td>Re-mailed</td>             <td>Total Mail (Mailed, Re-mailed)</td>             <td>E-mailed</td>             <td>Total Sent (Mailed, E-mailed)</td>           </tr>           <xsl:for-each select="FieldingCounts/Row">             <tr>               <xsl:for-each select="./*">                 <td>                   <xsl:value-of select="." />                 </td>               </xsl:for-each>             </tr>           </xsl:for-each>         </table>   </xsl:template> </xsl:stylesheet>    Then a script task is used to send out an HTML email (as we are all painfully aware that SSIS Send Mail Task only sends plain text) Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 using System; using System.Data; using Microsoft.SqlServer.Dts.Runtime; using System.Windows.Forms; using System.Net.Mail; using System.Net;   namespace ST_b829a2615e714bcfb55db0ce97be3901.csproj {     [System.AddIn.AddIn("ScriptMain", Version = "1.0", Publisher = "", Description = "")]     public partial class ScriptMain : Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase     {           #region VSTA generated code         enum ScriptResults         {             Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success,             Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure         };         #endregion           public void Main()         {             String EmailMsgBody = String.Format("<HTML><BODY><P>{0}</P><P>{1}</P></BODY></HTML>"                                                 , Dts.Variables["Config_SMTP_MessageSourceText"].Value.ToString()                                                 , Dts.Variables["InternalStr_CountResultAfterXSLT"].Value.ToString());             MailMessage EmailCountMsg = new MailMessage(Dts.Variables["Config_SMTP_From"].Value.ToString().Replace(";", ",")                                                         , Dts.Variables["Config_SMTP_Success_To"].Value.ToString().Replace(";", ",")                                                         , Dts.Variables["Config_SMTP_SubjectLinePrefix"].Value.ToString() + " " + Dts.Variables["InternalStr_FieldingDate"].Value.ToString()                                                         , EmailMsgBody);             //EmailCountMsg.From.             EmailCountMsg.CC.Add(Dts.Variables["Config_SMTP_Success_CC"].Value.ToString().Replace(";", ","));             EmailCountMsg.IsBodyHtml = true;               SmtpClient SMTPForCount = new SmtpClient(Dts.Variables["Config_SMTP_ServerAddress"].Value.ToString());             SMTPForCount.Credentials = CredentialCache.DefaultNetworkCredentials;               SMTPForCount.Send(EmailCountMsg);               Dts.TaskResult = (int)ScriptResults.Success;         }     } } Note on this code: notice the email list has Replace(";", ",").  This is only here because the list is configurable in the SQL Job Step at Set Values, which does not react well with colons as email separator, but system.Net.Mail only handles comma as email separator, hence the extra replace in the string. The result is a nicely formatted email message with count information:

  Read the article

< Previous Page | 163 164 165 166 167 168 169 170 171 172 173 174  | Next Page >