mysql sock - Page 168 - Developer IT

Row selection based on subtable data in MySQL

- by Felthragar

I've been struggling with this selection for a while now, I've been searching around StackOverflow and tried a bunch of stuff but nothing that helps me with my particular issue. Maybe I'm just missing something obvious. I have two tables: Measurements, MeasurementFlags "Measurements" contain measurements from a device, and each measurement can have properties/attributes attached to them (commonly known as "flags") to signify that the measurement in question is special in some way or another (for instance, one flag may signify a test or calibration measurement). Note: One record per flag! Right, so a record from the "Measurements" table can theoreticly have an unlimited amount of MeasurementFlags attached to it, or it can have none. Now, I need to select records from "Measurements", that have an attached "MeasurementFlag" valued "X", but it must also NOT have a flag valued "Y" attached to it. We're talking about a fairly large database with hundreds of millions of rows, which is why I'm trying to keep all of this logic within one query. Splitting it up would create too many queries, however if it's not possible to do in one query I guess I don't have a choise. Thanks in advance.

Read the article

PHP mySQL - select unique value that not being used from dirrefent table

- by apis17

Read the article

mySQL Query JOIN in same table

- by jeerose

Table structure goes something like this: Table: Purchasers Columns: id | organization | city | state Table: Events Columns: id | purchaser_id My query: SELECT purchasers.*, events.id AS event_id FROM purchasers INNER JOIN events ON events.purchaser_id = purchasers.id WHERE purchasers.id = '$id' What I would like to do, is obviously to select entries by their id from the purchasers table and join from events. That's the easy part. I can also easily to another query to get other purchasers with the same organization, city and state (there are multiples) but I'd like to do it all in the same query. Is there a way I can do this? In short, grab purchasers by their ID but then also select other purchasers that have the same organization, city and state. Thanks.

Read the article

mysql check if numbers are in a comma separated list

- by Tillebeck

Hi I have a table like this: UID(int) NUMBERS(blob) ---------------------- 1 1,13,15,20 2 3,10,15,20 3 3,15 And I would like to test if 3 and 15 are in the blob called NUMBERS. And can see the LIKE %% cannot be used Only row with ID 2 and three scoulb be selected...

Read the article

Database design MySQL using foreign keys

- by dscher

I'm having some a little trouble understanding how to handle the database end of a program I'm making. I'm using an ORM in Kohana, but am hoping that a generalized understanding of how to solve this issue will lead me to an answer with the ORM. I'm writing a program for users to manage their stock research information. My tables are basically like so: CREATE TABLE tags( id INT AUTO_INCREMENT NOT NULL PRIMARY KEY, tags VARCHAR(30), UNIQUE(tags) ) ENGINE=INNODB DEFAULT CHARSET=utf8; CREATE TABLE stock_tags( id INT AUTO_INCREMENT NOT NULL PRIMARY KEY, tag_id INT NOT NULL, stock_id INT NOT NULL, FOREIGN KEY (tag_id) REFERENCES tags(id), FOREIGN KEY(stock_id) REFERENCES stocks(id) ON DELETE CASCADE ) ENGINE=INNODB DEFAULT CHARSET=utf8; CREATE TABLE notes( id INT AUTO_INCREMENT NOT NULL, stock_id INT NOT NULL, notes TEXT NOT NULL, FOREIGN KEY (stock_id) REFERENCES stocks(id) ON DELETE CASCADE, PRIMARY KEY(id) ) ENGINE=INNODB DEFAULT CHARSET=utf8; CREATE TABLE links( id INT AUTO_INCREMENT NOT NULL, stock_id INT NOT NULL, links VARCHAR(2083) NOT NULL, FOREIGN KEY (stock_id) REFERENCES stocks(id) ON DELETE CASCADE, PRIMARY KEY(id) ) ENGINE=INNODB DEFAULT CHARSET=utf8; How would I get all the attributes of a single stock, including its links, notes, and tags? Do I have to add links, notes, and tags columns to the stocks table and then how do you call it? I know this differs using an ORM and I'd assume that I can use join tables in SQL. Thanks for any help, this will really help me understand the issue a lot better.

Read the article

PHP Moving mySQL Tree Node

- by TK

I am having trouble trying to move sub nodes or parent nodes up or down... not that good at math. CREATE TABLE IF NOT EXISTS `pages` ( page-id mediumint(8) unsigned NOT NULL AUTO_INCREMENT, page-left mediumint(8) unsigned NOT NULL, page-right smallint(8) unsigned NOT NULL, page-title text NOT NULL, page-content text NOT NULL, page-time int(11) unsigned NOT NULL, page-slug text NOT NULL, page-template text NOT NULL, page-parent mediumint(8) unsigned NOT NULL, page-type text NOT NULL, PRIMARY KEY (page-id) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 ; INSERT INTO pages (page-id, page-left, page-right, page-title, page-content, page-time, page-slug, page-template, page-parent, page-type) VALUES (17, 1, 6, '1', '', 0, 'PARENT', '', 0, ''), (18, 2, 5, '2', '', 0, 'SUB', '', 17, ''), (19, 3, 4, '3', '', 0, 'SUB-SUB', '', 18, ''), (20, 7, 8, '5', '', 0, 'TEST', '', 0, ''); As example how would I move TEST up above PARENT and say move SUB down below SUB-SUB by playing with the page-left/page-right IDs? Code is not required just help with the SQL concept or math for it, would help me understand how to move it better...

Read the article

How to match multiple field in mySQL

- by Mint

Im trying to match forum_id with several different forum_id's, something like forum_id = 5,7,12,43,63,78 I currently have this code: SELECT topic_title, topic_id, forum_id FROM $MYSQL_TOPIC WHERE topic_title LIKE '%%%s%%' AND forum_id = 5 LIMIT 50 (using mysql_real_escape_string and sprintf) I tried: forum_id = 5 OR 7 forum_id = 5|7 forum_id = 5 AND 7 forum_id = 5 & 7 But none of them will match them all and therefore search though them all.

Read the article

MYSQL join - reference external field from nested select?

- by PHP thinker

Is it allowed to reference external field from nested select? E.g. SELECT FROM ext1 LEFT JOIN (SELECT * FROM int2 WHERE int2.id = ext1.some_id ) as x ON 1=1 in this case, this is referencing ext1.some_id in nested select. I am getting errors in this case that field ext1.some_id is unknow. Is it possible? Is there some other way?

Read the article

mysql whats wrong with this query?

- by Hailwood

I'm trying to write a query that selects from four tables campaignSentParent csp campaignSentEmail cse campaignSentFax csf campaignSentSms css Each of the cse, csf, and css tables are linked to the csp table by csp.id = (cse/csf/css).parentId The csp table has a column called campaignId, What I want to do is end up with rows that look like: | id | dateSent | emailsSent | faxsSent | smssSent | | 1 | 2011-02-04 | 139 | 129 | 140 | But instead I end up with a row that looks like: | 1 | 2011-02-03 | 2510340 | 2510340 | 2510340 | Here is the query I am trying SELECT csp.id id, csp.dateSent dateSent, COUNT(cse.parentId) emailsSent, COUNT(csf.parentId) faxsSent, COUNT(css.parentId) smsSent FROM campaignSentParent csp, campaignSentEmail cse, campaignSentFax csf, campaignSentSms css WHERE csp.campaignId = 1 AND csf.parentId = csp.id AND cse.parentId = csp.id AND css.parentId = csp.id; Adding GROUP BY did not help, so I am posting the create statements. csp CREATE TABLE `campaignsentparent` ( `id` int(11) NOT NULL AUTO_INCREMENT, `campaignId` int(11) NOT NULL, `dateSent` datetime NOT NULL, `account` int(11) NOT NULL, `status` varchar(15) NOT NULL DEFAULT 'Creating', PRIMARY KEY (`id`) ) ENGINE=MyISAM AUTO_INCREMENT=2 DEFAULT CHARSET=latin1 cse/csf (same structure, different names) CREATE TABLE `campaignsentemail` ( `id` int(11) NOT NULL AUTO_INCREMENT, `parentId` int(11) NOT NULL, `contactId` int(11) NOT NULL, `content` text, `subject` text, `status` varchar(15) DEFAULT 'Pending', PRIMARY KEY (`id`) ) ENGINE=MyISAM AUTO_INCREMENT=140 DEFAULT CHARSET=latin1 css CREATE TABLE `campaignsentsms` ( `id` int(11) NOT NULL AUTO_INCREMENT, `parentId` int(11) NOT NULL, `contactId` int(11) NOT NULL, `content` text, `status` varchar(15) DEFAULT 'Pending', PRIMARY KEY (`id`) ) ENGINE=MyISAM AUTO_INCREMENT=141 DEFAULT CHARSET=latin1

Read the article

mysql to get depth of record, count parent and ancestor records

- by Nate

Hey All, Say I have a post table containing the fields post_id and parent_post_id. I want to return every record in the post table with a count of the "depth" of the post. By depth, I mean, how many parent and ancestor records exist. Take this data for example... post_id parent_post_id ------- -------------- 1 null 2 1 3 1 4 2 5 4 The data represents this hierarchy... 1 |_ 2 | |_ 4 | |_ 5 |_ 3 The result of the query should be... post_id depth ------- ----- 1 0 2 1 3 1 4 2 5 3 Thanks in advance!

Read the article

How to model parent to child pair in MySQL (SQL)

- by mikeschuld

I have a data model that includes element types Stage, Actor, and Form. Logically, Stages can be assigned pairs of ( Form <--- Actor ) which can be duplicated many times (i.e. same person and same form added to the same stage at a later date/time). Right now I am modeling this with these tables: Stage Form Actor Form_Actor _______________ |Id | |FormId | --> Id in Form |ActorId | --> Id in Actor Stage_FormActor __________________ |Id | |StageId | --> Id in Stage |FormActorId | --> Id in Form_Actor I am using CodeSmith to generate the data layer for this setup and none of the templates really know how to handle this type of relationship correctly when generating classes. Ideally, the ORM would have Stage.FormActors where FormActor would be the pair Form, Actor. Is this the correct way to model these relationships. I have tried using all three Ids in one table as well Stage_Form_Actor ______________ |Id | |StageId | --> Id in Stage |FormId | --> Id in Form |ActorId | --> Id in Actor This doesn't really get generated very well either. Ideas?

Read the article

Caching Mysql database for better performance

- by kobey

Hi, I'm using Amazon cloud and I've performance issue since the HDD is not located on my machine. My database is small (~500MB) and I can afford to keep it all in my RAM. I do not want to keep queries in my RAM, i need all the tables there. How can i do it? Thanks, Koby P.S. I'm using ubuntu server...

Read the article

Mysql trigger to block a row delete

- by rtacconi

I wuold like to define a trigger to block the deletion of the row with ID 2 of the configuration table, you might guess why, I am trying something like that: CREATE TRIGGER do_not_delete_configuration_1 BEFORE DELETE ON configuration FOR EACH ROW BEGIN IF (OLD.configurationid != 1) THEN DELETE FROM configuration WHERE configuration.configuration=OLD.configurationid; END IF; END; | without a positive result.

Read the article

MySQL doesn't yet support 'LIMIT & IN/ALL/ANY/SOME subquery'

- by user198729

SELECT u.id AS u__id, u.username AS u__username, p.id AS p__id, p.phonenumber AS p__phonenumber, p.user_id AS p__user_id FROM user u INNER JOIN phonenumber p ON u.id = p.user_id WHERE u.id IN (SELECT DISTINCT u2.id FROM user u2 INNER JOIN phonenumber p2 ON u2.id = p2.user_id LIMIT 20) This query is from here: http://www.doctrine-project.org/documentation/manual/1_2/en/dql-doctrine-query-language It's supposed to work on all DBMS ,but not in fact

Read the article

Mysql select - improve performance

- by realshadow

Hey, I am working on an e-shop which sells products only via loans. I display 10 products per page in any category, each product has 3 different price tags - 3 different loan types. Everything went pretty well during testing time, query execution time was perfect, but today when transfered the changes to the production server, the site "collapsed" in about 2 minutes. The query that is used to select loan types sometimes hangs for ~10 seconds and it happens frequently and thus it cant keep up and its hella slow. The table that is used to store the data has approximately 2 milion records and each select looks like this: SELECT * FROM products_loans WHERE KOD IN("X17/Q30-10", "X17/12", "X17/5-24") AND 369.27 BETWEEN CENA_OD AND CENA_DO; 3 loan types and the price that needs to be in range between CENA_OD and CENA_DO, thus 3 rows are returned. But since I need to display 10 products per page, I need to run it trough a modified select using OR, since I didnt find any other solution to this. I have asked about it here, but got no answer. As mentioned in the referencing post, this has to be done separately since there is no column that could be used in a join (except of course price and code, but that ended very, very badly). Here is the show create table, kod and CENA_OD/CENA_DO very indexed via INDEX. CREATE TABLE `products_loans` ( `KOEF_ID` bigint(20) NOT NULL, `KOD` varchar(30) NOT NULL, `AKONTACIA` int(11) NOT NULL, `POCET_SPLATOK` int(11) NOT NULL, `koeficient` decimal(10,2) NOT NULL default '0.00', `CENA_OD` decimal(10,2) default NULL, `CENA_DO` decimal(10,2) default NULL, `PREDAJNA_CENA` decimal(10,2) default NULL, `AKONTACIA_SUMA` decimal(10,2) default NULL, `TYP_VYHODY` varchar(4) default NULL, `stage` smallint(6) NOT NULL default '1', PRIMARY KEY (`KOEF_ID`), KEY `CENA_OD` (`CENA_OD`), KEY `CENA_DO` (`CENA_DO`), KEY `KOD` (`KOD`), KEY `stage` (`stage`) ) ENGINE=InnoDB DEFAULT CHARSET=utf8 And also selecting all loan types and later filtering them trough php doesnt work good, since each type has over 50k records and the select takes too much time as well... Any ides about improving the speed are appreciated.

Read the article

Mysql and PHP - Reading multiple insert queries from a file and executing at runtime

- by SpikETidE

Hi everyone... I am trying out a back-up and restore system. Basically, what i try to do is, when creating the back up i make a file which looks like DELETE FROM bank_account; INSERT INTO bank_account VALUES('1', 'IB6872', 'Indian Bank', 'Indian Bank', '2', '1', '0', '0000-00-00 00:00:00', '1', '2010-04-13 17:09:05');INSERT INTO bank_account VALUES('2', 'IB7391', 'Indian Bank', 'Indian Bank', '3', '1', '0', '0000-00-00 00:00:00', '1', '2010-04-13 17:09:32'); and so on and so forth. When i restore the db i just read the query from the file, save it to a string and then execute it over the DB using mysql_query(); The problem is, when i run the query through mysql_query(), the execution stops after the delete query with the error 'Error in syntax near '; INSERT INTO bank_account VALUES('1', 'IB6872', 'Indian Bank', 'Indian Bank', '2',' at line 1. But when i run the queries directly over the Db, using phpmyadmin it executes without any errors. As far as i can see, i can't notice any syntax error in the query. Can anyone point out where there might be a glitch...? Thanks and regards....

Read the article

Select nth percentile from MySQL

- by mazin k.

I have a simple table of data, and I'd like to select the row that's at about the 40th percentile from the query. I can do this right now by first querying to find the number of rows and then running another query that sorts and selects the nth row: select count(*) as `total` from mydata; select * from mydata order by `field` asc limit 37,1; Can I combine these two queries into a single query?

Read the article

What does this MySQL statement do?

- by user198729

INSERT IGNORE INTO `PREFIX_tab_lang` (`id_tab`, `id_lang`, `name`) (SELECT `id_tab`, id_lang, (SELECT tl.`name` FROM `PREFIX_tab_lang` tl WHERE tl.`id_lang` = (SELECT c.`value` FROM `PREFIX_configuration` c WHERE c.`name` = 'PS_LANG_DEFAULT' LIMIT 1) AND tl.`id_tab`=`PREFIX_tab`.`id_tab`) FROM `PREFIX_lang` CROSS JOIN `PREFIX_tab`); It's from an opensource project,and no documentation available. Especially,what does cross-join mean? I've only used join/left join .

Read the article

checkbox, php and update mysql!

- by Ronnie Chester Lynwood

Hello now I got this form. i get values with "while": mysql_query("select * from mp3 where aktif = '0'"); <form name="form" method="post" action=""> <input type="text" size="10" name="id" value="<?=$haciosman['id']?>" /> <input type="text" name="baslik" value="<?=$haciosman['baslik']?> <textarea name="sarkisozu"><?=$haciosman['sarkisozu']?></textarea> <input type="text" name="a3" value="<?=$haciosman['ekleyen']?"> <input type="checkbox" name="onay[]" /> <input type="submit" name="0" id="0" value="Onayla" /> <form> and updating values with: <? if (isset($_POST['onay'])) { $cikti = mysql_query("update mp3 set aktif = '1', baslik = '$_POST[baslik]' where id = '$_POST[id]'"); if ($cikti) { echo "islem tamam"; exit; } } ?> but this code only updating only one value. how can i let it update multiple values?

Read the article

Update the rank in a MySQL Table

- by sammichy

I have the following table structure for a table Player Table Player { Long playerID; Long points; Long rank; } Assuming that the playerID and the points have valid values, can I update the rank for all the players based on the number of points in a single query? If two people have the same number of points, they should tie for the rank.

Read the article

PHP, MySQL, jQuery, AJAX: json data returns correct response but frontend returns error

- by Devner

Hi all, I have a user registration form. I am doing server side validation on the fly via AJAX. The quick summary of my problem is that upon validating 2 fields, I get error for the second field validation. If I comment first field, then the 2nd field does not show any error. It has this weird behavior. More details below: The HTML, JS and Php code are below: HTML FORM: <form id="SignupForm" action=""> <fieldset> <legend>Free Signup</legend> <label for="username">Username</label> <input name="username" type="text" id="username" /><span id="status_username"></span><br /> <label for="email">Email</label> <input name="email" type="text" id="email" /><span id="status_email"></span><br /> <label for="confirm_email">Confirm Email</label> <input name="confirm_email" type="text" id="confirm_email" /><span id="status_confirm_email"></span><br /> </fieldset> <p> <input id="sbt" type="button" value="Submit form" /> </p> </form> JS: <script type="text/javascript"> $(document).ready(function() { $("#email").blur(function() { var email = $("#email").val(); var msgbox2 = $("#status_email"); if(email.length > 3) { $.ajax({ type: 'POST', url: 'check_ajax2.php', data: "email="+ email, dataType: 'json', cache: false, success: function(data) { if(data.success == 'y') { alert('Available'); } else { alert('Not Available'); } } }); } return false; }); $("#confirm_email").blur(function() { var confirm_email = $("#confirm_email").val(); var email = $("#email").val(); var msgbox3 = $("#status_confirm_email"); if(confirm_email.length > 3) { $.ajax({ type: 'POST', url: 'check_ajax2.php', data: 'confirm_email='+ confirm_email + '&email=' + email, dataType: 'json', cache: false, success: function(data) { if(data.success == 'y') { alert('Available'); } else { alert('Not Available'); } } , error: function (data) { alert('Some error'); } }); } return false; }); }); </script> PHP code: <?php //check_ajax2.php if(isset($_POST['email'])) { $email = $_POST['email']; $res = mysql_query("SELECT uid FROM members WHERE email = '$email' "); $i_exists = mysql_num_rows($res); if( 0 == $i_exists ) { $success = 'y'; $msg_email = 'Email available'; } else { $success = 'n'; $msg_email = 'Email is already in use.</font>'; } print json_encode(array('success' => $success, 'msg_email' => $msg_email)); } if(isset($_POST['confirm_email'])) { $confirm_email = $_POST['confirm_email']; $email = ( isset($_POST['email']) && trim($_POST['email']) != '' ? $_POST['email'] : '' ); $res = mysql_query("SELECT uid FROM members WHERE email = '$confirm_email' "); $i_exists = mysql_num_rows($res); if( 0 == $i_exists ) { if( isset($email) && isset($confirm_email) && $email == $confirm_email ) { $success = 'y'; $msg_confirm_email = 'Email available and match'; } else { $success = 'n'; $msg_confirm_email = 'Email and Confirm Email do NOT match.'; } } else { $success = 'n'; $msg_confirm_email = 'Email already exists.'; } print json_encode(array('success' => $success, 'msg_confirm_email' => $msg_confirm_email)); } ?> THE PROBLEM: As long as I am validating the $_POST['email'] as well as $_POST['confirm_email'] in the check_ajax2.php file, the validation for confirm_email field always returns an error. With my limited knowledge of Firebug, however, I did find out that the following were the responses when I entered email and confirm_email in the fields: RESPONSE 1: {"success":"y","msg_email":"Email available"} RESPONSE 2: {"success":"y","msg_email":"Email available"}{"success":"n","msg_confirm_email":"Email and Confirm Email do NOT match."} Although the RESPONSE 2 shows that we are receiving the correct message via msg_confirm_email, in the front end, the alert 'Some error' is popping up (I have enabled the alert for debugging). I have spent 48 hours trying to change every part of the code wherever possible, but with only little success. What is weird about this is that if I comment the validation for $_POST['email'] field completely, then the validation for $_POST['confirm_email'] field is displaying correctly without any errors. If I enable it back, it is validating email field correctly, but when it reaches the point of validating confirm_email field, it is again showing me the error. I have also tried renaming success variable in check_ajax2.php page to other different names for both $_POST['email'] and $_POST['confirm_email'] but no success. I will be adding more fields in the form and validating within the check_ajax2.php page. So I am not planning on using different ajax pages for validating each of those fields (and I don't think it's smart to do it that way). I am not a jquery or AJAX guru, so all help in resolving this issue is highly appreciated. Thank you in advance.

Read the article

MySQL GROUP_CONCAT + IN() = missing data :-(

- by Andrew Heath

Example: Table: box boxID color 01 red 02 blue 03 green Table: boxHas boxID has 01 apple 01 pear 01 grapes 01 banana 02 lime 02 apple 02 pear 03 chihuahua 03 nachos 03 baby crocodile I want to query on the contents of each box, and return a table with each ID, color, and a column that concatenates the contents of each box, so I use: SELECT box.boxID, box.color, GROUP_CONCAT(DISTINCT boxHas.has SEPARATOR ", ") AS contents FROM box LEFT JOIN boxHas ON box.boxID=boxHas.boxID WHERE boxHas.has IN ('apple','pear') GROUP BY box.boxID ORDER BY box.boxID and I get the following table of results: boxID color contents 01 red apple, pear 02 blue apple, pear My question to you is: why isn't it listing ALL the has values in the contents column? Why is my WHERE statement also cropping my GROUP_CONCAT? The table I thought I was going to get is: boxID color contents 01 red apple, banana, grapes, pear 02 blue apple, lime, pear Although I want to limit my boxID results based upon the WHERE statement, I do not want to limit the contents field for valid boxes. :-/ Help?

Read the article

Import CSV to mysql

- by 404error

I have created a database and table. I have also created all the fields i will be needing. I have created 46 fields including 1 that is my ID for the row. The CSV doesn't contain the id field, nor does it contain the headers for the columns. I am new to all of this but have been trying to figure this out. I'm not on here being lazy asking for the answer, but looking for direction. I'm trying to figure out how to import the CSV but have it start importing data starting at the 2nd field, since I'm hoping the auto_increment will fill in the ID field, which is the first field i created. I tried these instructions with now luck. Can anyone offer some insight? your cvs file's column name must match your table column name browse your required .csv file select CSV using LOAD DATA options Check box 'ON' for Replace table data with file in Fields terminated by box type , in Fields enclosed by box " in Fields escaped by box \ in Lines terminated by box auto in Column names box type column name seperated by , like column1,column2,column3 10 check box ON for Use LOCAL keyword.

Read the article

mysql - joining three tables with HAVING

- by Qiao

I have table: id name type where "type" is 1 or 2 I need to join this table with two other. Rows with "type = 1" should be joined with first table, and =2 with second. Something like SELECT * FROM tbl INNER JOIN tbl_1 ON tbl.name = tbl_1.name HAVING tbl.type = 1 INNER JOIN tbl_2 ON tbl.name = tbl_2.name HAVING tbl.type = 2 But it does not working. How it can be implemented?

Read the article

Specific query in Mysql

- by Radhe

I have two tables reports and holidays. reports: (username varchar(30),activity varchar(30),hours int(3),report_date date) holidays: (holiday_name varchar(30), holiday_date date) select * from reports gives +----------+-----------+---------+------------+ | username | activity | hours | date | +----------+-----------+---------+------------+ | prasoon | testing | 3 | 2009-01-01 | | prasoon | coding | 4 | 2009-01-03 | | prasoon | designing| 2 | 2009-01-04 | | prasoon | coding | 4 | 2009-01-06 | +----------+-----------+---------+------------+ select * from holidays gives +--------------+---------------+ | holiday_name | holiday_date | +--------------+---------------+ | Diwali | 2009-01-02 | | Holi | 2009-01-05 | +--------------+---------------+ Is there any way by which I can output the following? +-------------+-----------+---------+-------------------+ | date | activity | hours | holiday_name | +-------------+-----------+---------+-------------------+ | 2009-01-01 | testing | 3 | | | 2009-01-02 | | | Diwali | | 2009-01-03 | coding | 4 | | | 2009-01-04 | designing| 2 | | | 2009-01-05 | | | Holi | | 2009-01-06 | coding | 4 | | +-------------+-----------+---------+-------------------+

Search Results

Search found 14310 results on 573 pages for 'mysql sock'.

Page 168/573 | < Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175 | Next Page >

- by Felthragar

- by apis17

- by jeerose

- by Tillebeck

- by dscher

- by TK

- by Mint

- by PHP thinker

- by Hailwood

- by Nate

- by mikeschuld

- by kobey

- by rtacconi

- by user198729

- by realshadow

- by SpikETidE

- by mazin k.

- by user198729

- by Ronnie Chester Lynwood

- by sammichy

- by Devner

- by Andrew Heath

- by 404error

- by Qiao

- by Radhe

< Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175 | Next Page >