Search Results

Search found 4390 results on 176 pages for 'git daemon'.

Page 169/176 | < Previous Page | 165 166 167 168 169 170 171 172 173 174 175 176  | Next Page >

  • Error installing mysql, any way to fix it?

    - by user156355
    I was installing mysql with apt-get install mysql-server (like I always did) before that I had done an apt-get update (I am using Debian 6), and when I installed I found this problem, pretty common as I see, but Ive followed all stepts and nothing have worked, Ive tried with apt-get install -f also with apt-get remove mysql-server (and common, and mysql-server-5.1) and also with apt-get purge (every packate) and later install, but nothing... I tried also dpkg-reconfigure mysql-server-5.1 apt-get install --reinstall mysql-server (all runed as Root) Still, nothing worked, any idea??? 130130 10:11:48 InnoDB: Shutdown completed; log sequence number 0 44233 Starting MySQL database server: mysqld . . . . . . . . . . . . . . failed! invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing mysql-server-5.1 (--configure): subprocess installed post-installation script returned error exit status 1 configured to not write apport reports dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.1; however: Package mysql-server-5.1 is not configured yet. dpkg: error processing mysql-server (--configure): dependency problems - leaving unconfigured configured to not write apport reports Errors were encountered while processing: mysql-server-5.1 mysql-server E: Sub-process /usr/bin/dpkg returned an error code (1) when I tried dpkg-reconfigure mysql-server-5.1 /usr/sbin/dpkg-reconfigure: mysql-server-5.1 is broken or not fully installed the case "Start" on /etc/init.d/mysql is 'start') sanity_checks; # Start daemon log_daemon_msg "Starting MySQL database server" "mysqld" if mysqld_status check_alive nowarn; then log_progress_msg "already running" log_end_msg 0 else # Could be removed during boot test -e /var/run/mysqld || install -m 755 -o mysql -g root -d /var/run/mysqld # Start MySQL! /usr/bin/mysqld_safe > /dev/null 2>&1 & # 6s was reported in #352070 to be too few when using ndbcluster for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14; do sleep 1 if mysqld_status check_alive nowarn ; then break; fi log_progress_msg "." done if mysqld_status check_alive warn; then log_end_msg 0 # Now start mysqlcheck or whatever the admin wants. output=$(/etc/mysql/debian-start) [ -n "$output" ] && log_action_msg "$output" else log_end_msg 1 log_failure_msg "Please take a look at the syslog" fi fi When I make mysql force-reload: Reloading MySQL database server: mysqld/usr/bin/mysqladmin: connect to server at 'localhost' failed error: 'Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)' Check that mysqld is running and that the socket: '/var/run/mysqld/mysqld.sock' exists! root@americandougnuts:/etc/init.d# root@americandougnuts:/etc/init.d# Check that mysqld is running and that the socket: '/var/run/mysqld/mysqld.sock' exists!

    Read the article

  • Understanding NFS4 (Linux server)

    - by drumfire
    I've been a bit bothered by NFS4 on Linux. Some information 'out there' seems to conflict with other information, and other information appears hard to find. So here are a couple of things that caught my attention, hopefully someone out there can shed some light on this. This question focuses exclusively on NFS4 without Kerberos etc. 1. Exports There is ambiguous information in the exports manpage on the structure of /etc/exports. To quote from exports(5): Also, each line may have one or more specifications for default options after the path name, in the form of a dash ("-") followed by an option list. The option list is used for all subsequent exports on that line only. What does "subsequent exports on that line only" mean? 1.2 fsid=0 not required anymore? I was searching for fsid when I found a comment on the linux-nfs list stating fsid=0 is not required anymore. Now I'm just confused, do I need it with nfs4 or not?! 2. Non-exported directory still mountable Say I have the following tree: /exp /exp/users /exp/distr /exp/distr/archlinux /exp/distr/debian And I have the following entries in this fstab entry: /dev/disk/by-label/users /mnt/users ext4 defaults 0 0 /dev/disk/by-label/distr /mnt/distr ext4 defaults 0 0 /mnt/users /exp/users none bind 0 0 /mnt/distr /exp/distr none bind 0 0 And my exports is exactly this: /exp 192.168.1.0/24(fsid=0,rw,async,no_subtree_check,no_root_squash) /exp/distr 192.168.1.0/24(rw,async,no_subtree_check,no_root_squash) And exportfs -arv shows: exporting 192.168.1.0/24:/exp/distr exporting 192.168.1.0/24:/exp Then why am I able to do this and get no error on a client: mount -t nfs4 server:/exp/users /tmp/test Even though /exp/users is not exported? I didn't export this directory, and while I don't see the contents of /dev/disk/by-label/users unless I specify crossmnt, I am still able to write to the directory. Everything I write to there goes to the underlying directory of /exp/users which can be seen when I umount /exp/users; ls /exp/users.. 3. The odd case of showmount -d server As stated by rpc.mountd(8), this command should display directories that are either currently mounted by clients, or stale entries in /var/lib/nfs/rmtab, as can be read: The rpc.mountd daemon registers every successful MNT request by adding an entry to the /var/lib/nfs/rmtab file. When receivng a UMNT request from an NFS client, rpc.mountd simply removes the matching entry from /var/lib/nfs/rmtab, as long as the access control list for that export allows that sender to access the export. (...) Note, however, that there is little to guarantee that the contents of /var/lib/nfs/rmtab are accurate. A client may continue accessing an export even after invoking UMNT. If the client reboots without sending a UMNT request, stale entries remain for that client in /var/lib/nfs/rmtab. After reading this I surely wonder: Isn't it terribly insecure to just expose this type of client information; Aren't unaware server admins bound to have an rmtab with a lot of stale clients; Is this the reason that clients that mount nfs4 directories with mount -v get to see output like "nothing was mounted" even though something was mounted? I have a lot of other questions regarding nfs4, but I'll keep it at this for the moment.. :)

    Read the article

  • Announcing the New Windows Azure Web Sites Shared Scaling Tier

    - by Clint Edmonson
    Windows Azure Web Sites has added a new pricing tier that will solve the #1 blocker for the web development community. The shared tier now supports custom domain names mapped to shared-instance web sites. This post will outline the plan changes and elaborate on how the new pricing model makes Windows Azure Web Sites an even richer option for web development shops of all sizes. Free Shared Reserved # of Sites 10 100 100 Egress 165MB/Day 5GB/Month Included 5GB/Month Included Storage 1GB 1GB 10GB Throttling CPU/Memory/Egress CPU/Memory Unlimited Price Free $.02/hr per site, per instance $.08/hr per core Setting the Stage In June, we released the first public preview of Windows Azure Web Sites, which gave web developers a great platform on which to get web sites running using their web development framework of choice. PHP, Node.js, classic ASP, and ASP.NET developers can all utilize the Windows Azure platform to create and launch their web sites. Likewise, these developers have a series of data storage options using Windows Azure SQL Databases, MySQL, or Windows Azure Storage. The Windows Azure Web Sites free offer enabled startups to get their site up and running on Windows Azure with a minimal investment, and with multiple deployment and continuous integration features such as Git, Team Foundation Services, FTP, and Web Deploy.  The response to the Windows Azure Web Sites offer has been overwhelmingly positive. Since the addition of the service on June 12th, tens of thousands of web sites have been deployed to Windows Azure and the volume of adoption is increasing every week. Preview Feedback In spite of the growth and success of the product, the community has had questions about features lacking in the free preview offer. The main question web developers asked regarding Windows Azure Web Sites relates to the lack of the free offer’s support for domain name mapping. During the preview launch period, customer feedback made it obvious that the lack of domain name mapping support was an area of concern. We’re happy to announce that this #1 request has been delivered as a feature of the new shared plan. New Shared Tier Portal Features In the screen shot below, the “Scale” tab in the portal shows the new tiers – Free, Shared, and Reserved – and gives the user the ability to quickly move any of their free web sites into the shared tier. With a single mouse-click, the user can move their site into the shared tier. Once a site has been moved into the shared tier, a new Manage Domains button appears in the bottom action bar of the Windows Azure Portal giving site owners the ability to manage their domain names for a shared site. This button brings up the domain-management dialog, which can be used to enter in a specific domain name that will be mapped to the Windows Azure Web Site. Shared Tier Benefits Startups and large web agencies will both benefit from this plan change. Here are a few examples of scenarios which fit the new pricing model: Startups no longer have to select the reserved plan to map domain names to their sites. Instead, they can use the free option to develop their sites and choose on a site-by-site basis which sites they elect to move into the shared plan, paying only for the sites that are finished and ready to be domain-mapped Agencies who manage dozens of sites will realize a lower cost of ownership over the long term by moving their sites into reserved mode. Once multi-site companies reach a certain price point in the shared tier, it is much more cost-effective to move sites to a reserved tier.  Long-term, it’s easy to see how the new Windows Azure Web Sites shared pricing tier makes Windows Azure Web Sites it a great choice for both startups and agency customers, as it enables rapid growth and upgrades while keeping the cost to a minimum. Large agencies will be able to have all of their sites in their own instances, and startups will have the capability to scale up to multiple-shared instances for minimal cost and eventually move to reserved instances without worrying about the need to incur continually additional costs. Customers can feel confident they have the power of the Microsoft Windows Azure brand and our world-class support, at prices competitive in the market. Plus, in addition to realizing the cost savings, they’ll have the whole family of Windows Azure features available. Continuous Deployment from GitHub and CodePlex Along with this new announcement are two other exciting new features. I’m proud to announce that web developers can now publish their web sites directly from CodePlex or GitHub.com repositories. Once connections are established between these services and your web sites, Windows Azure will automatically be notified every time a check-in occurs. This will then trigger Windows Azure to pull the source and compile/deploy the new version of your app to your web site automatically. Walk-through videos on how to perform these functions are below: Publishing to an Azure Web Site from CodePlex Publishing to an Azure Web Site from GitHub.com These changes, as well as the enhancements to the reserved plan model, make Windows Azure Web Sites a truly competitive hosting option. It’s never been easier or cheaper for a web developer to get up and running. Check out the free Windows Azure web site offering and see for yourself. Stay tuned to my twitter feed for Windows Azure announcements, updates, and links: @clinted

    Read the article

  • What do these messages in the Qmail maillog indicate?

    - by Griffo
    There seems to be an endless supply of messages in the Qmail maillog for a single address. Can anyone shed some light on why this might be and whether it is a problem? To me it looks like either spam or some sort of unhandled problem. It strikes me as unusual that the 'from=' field is blank. This is on a VPS using Plesk in case that's important. Jun 30 15:10:17 vps-1001108-595 qmail-remote-handlers[23593]: [email protected] Jun 30 15:10:17 vps-1001108-595 qmail-remote-handlers[23586]: from= Jun 30 15:10:17 vps-1001108-595 qmail-remote-handlers[23586]: [email protected] Jun 30 15:10:17 vps-1001108-595 qmail-remote-handlers[23585]: from= Jun 30 15:10:17 vps-1001108-595 qmail-remote-handlers[23585]: [email protected] Jun 30 15:10:17 vps-1001108-595 qmail-remote-handlers[23584]: from= Jun 30 15:10:17 vps-1001108-595 qmail-remote-handlers[23584]: [email protected] Jun 30 15:10:17 vps-1001108-595 qmail-remote-handlers[23583]: from= Jun 30 15:10:17 vps-1001108-595 qmail-remote-handlers[23583]: [email protected] Jun 30 15:10:17 vps-1001108-595 qmail-remote-handlers[23600]: from= Jun 30 15:10:17 vps-1001108-595 qmail-remote-handlers[23600]: [email protected] Jun 30 15:10:17 vps-1001108-595 qmail-remote-handlers[23599]: from= Jun 30 15:10:17 vps-1001108-595 qmail-remote-handlers[23599]: [email protected] EDIT Here's a sample of one of the emails: Received: (qmail 5603 invoked for bounce); 29 Jun 2011 07:46:31 +0100 Date: 29 Jun 2011 07:46:31 +0100 From: [email protected] To: [email protected] Subject: failure notice Hi. This is the qmail-send program at vps-1001108-595.cp.blacknight.com. I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. <[email protected]>: 200.147.36.13 does not like recipient. Remote host said: 450 4.7.1 Client host rejected: cannot find your hostname, [78.153.208.195] Giving up on 200.147.36.13. I'm not going to try again; this message has been in the queue too long. --- Below this line is a copy of the message. Return-Path: <[email protected]> Received: (qmail 15585 invoked by uid 48); 22 Jun 2011 07:38:26 +0100 Date: 22 Jun 2011 07:38:26 +0100 Message-ID: <[email protected]> To: [email protected] Subject: Cadastre-se e Concorra ? um Carro! MIME-Version: 1.0 Content-type: text/html; charset=iso-8859-1 From: Cielo Fidelidade <[email protected]> <!DOCTYPE HTML> <html> ... <body text removed> <html> If I understand this correctly, this is saying that an email sent by my server, from address [email protected], could not be delivered. However, [email protected] is not a valid email address on my server, so how can email be sent from this address on my server? I have tested whether my server is acting as an open relay, and it isn't. So how else could this be happening? I am getting thousands of these every day. What can I do to prevent it?

    Read the article

  • Tuning performance of Ubuntu 10.04 on Compaq Evo W4000.

    - by Fantomas
    Hi, I got this computer free and installed Ubuntu 10.04 on it + updates, plus followed the following tutorial all the way: http://www.unixmen.com/linux-tutorials/937-things-to-do-after-installing-ubuntu-1004-lts-lucid-lynx I love the Docky which comes with it, but the computer has been running rather slowly. The System: kernel 2.6.32-22-generic Gnome 2.30.0 (I like Gnome!) Memory: 1GB Processor: Intel (R) Pentium (R) 4 CPU 1700 MHz (needless to say, it is 32 bit). I think I dedicated 128 Mb to video memory while installing, but cannot find this setting now. I did also install an NVidia driver for the 3D card, so I probably want to reclaim that memory back. I want to trim the fat but I also want to keep some of the sex appeal of Ubuntu 10.04. I will gift this computer to a friend, who will use it for Internet, music, videos, word processing, Skype and instant messaging - he is non-technical, so this hardware and Linux should work for him; I just need to speed it up while keeping the good software and having a nice UI. I sort of know my way around Linux, but not that well. Feel free to ask me to run particular commands if you want more info. For starters, here are the services below. Which ones can I kill and how? What else can go? There is no need to run ssh or ftp or http or ntp servers. As I said before, this computer is for non-technical person. There is also absolutely no bluetooth or wireless networking needed - it will feed off a regular ethernet cable. What I do not want to do is reinstall some other distro or recompile a kernel. I want to make it 80% perfect spending 20% of the energy :) Thanks! $ service --status-all [ ? ] acpi-support [ ? ] acpid [ ? ] alsa-mixer-save [ ? ] anacron [ - ] apparmor [ ? ] apport [ ? ] atd [ ? ] avahi-daemon [ ? ] binfmt-support [ - ] bluetooth [ - ] bootlogd [ - ] brltty [ ? ] console-setup [ ? ] cron [ + ] cups [ ? ] dbus [ ? ] dmesg [ ? ] dns-clean [ ? ] failsafe-x [ - ] fancontrol [ ? ] gdm [ - ] grub-common [ ? ] hostname [ ? ] hwclock [ ? ] hwclock-save [ ? ] irqbalance [ - ] kerneloops [ ? ] killprocs [ - ] lm-sensors [ ? ] module-init-tools [ ? ] network-interface [ ? ] network-interface-security [ ? ] network-manager [ ? ] networking [ ? ] ondemand [ ? ] pcmciautils [ ? ] plymouth [ ? ] plymouth-log [ ? ] plymouth-splash [ ? ] plymouth-stop [ ? ] pppd-dns [ ? ] procps [ + ] pulseaudio [ ? ] rc.local [ - ] rsync [ ? ] rsyslog [ - ] saned [ ? ] screen-cleanup [ ? ] sendsigs [ ? ] speech-dispatcher [ ? ] stop-bootlogd [ ? ] stop-bootlogd-single [ ? ] udev [ ? ] udev-finish [ ? ] udevmonitor [ ? ] udevtrigger [ ? ] ufw [ ? ] umountfs [ ? ] umountnfs.sh [ ? ] umountroot [ ? ] unattended-upgrades [ - ] urandom [ + ] winbind [ ? ] wpa-ifupdown [ - ] x11-common

    Read the article

  • Cannot Start MySQL Server on Fresh MAMP Install

    - by alexpelan
    I'm using Mac OS X 10.6.2 on my Macbook Pro. I can get the apache server to start, but not the mysql server, on both the default apache and default MAMP ports. When I try to go to my start page, I get the message "Error: Could not connect to MySQL server!" . Here's what's in my mysql error log: 00513 02:00:07 mysqld_safe mysqld from pid file /Applications/MAMP/tmp/mysql/mysql.pid ended 100513 02:00:16 mysqld_safe Starting mysqld daemon with databases from /Applications/MAMP/db/mysql 100513 2:00:16 [Warning] The syntax '--log_slow_queries' is deprecated and will be removed in a future release. Please use '--slow_query_log'/'--slow_query_log_file' instead. 100513 2:00:16 [Warning] You have forced lower_case_table_names to 0 through a command-line option, even though your file system '/Applications/MAMP/db/mysql/' is case insensitive. This means that you can corrupt a MyISAM table by accessing it with different cases. You should consider changing lower_case_table_names to 1 or 2 100513 2:00:16 [Warning] One can only use the --user switch if running as root 100513 2:00:16 [Note] Plugin 'FEDERATED' is disabled. 100513 2:00:16 [Note] Plugin 'ndbcluster' is disabled. InnoDB: Error: log file /usr/local/mysql/data/ib_logfile0 is of different size 0 5242880 bytes InnoDB: than specified in the .cnf file 0 16777216 bytes! 100513 2:00:16 [ERROR] Plugin 'InnoDB' init function returned error. 100513 2:00:16 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed. 100513 2:00:16 [ERROR] /Applications/MAMP/Library/libexec/mysqld: unknown option '--skip-bdb' 100513 2:00:16 [ERROR] Aborting 100513 2:00:16 [Note] /Applications/MAMP/Library/libexec/mysqld: Shutdown complete 100513 02:00:16 mysqld_safe mysqld from pid file /Applications/MAMP/tmp/mysql/mysql.pid ended A couple of things: 1) There are a bunch of different .cnf files that come with MAMP (my-huge, my-medium, etc.)...how can I tell which one is actually being used? 2) I deleted the ib_logfile0 and ib_logfile1 as recommended by another post on serverfault, and then ended up with more errors: 100519 16:01:30 InnoDB: Log file /usr/local/mysql/data/ib_logfile0 did not exist: new to be created InnoDB: Setting log file /usr/local/mysql/data/ib_logfile0 size to 16 MB InnoDB: Database physically writes the file full: wait... 100519 16:01:30 InnoDB: Log file /usr/local/mysql/data/ib_logfile1 did not exist: new to be created InnoDB: Setting log file /usr/local/mysql/data/ib_logfile1 size to 16 MB InnoDB: Database physically writes the file full: wait... InnoDB: The log sequence number in ibdata files does not match InnoDB: the log sequence number in the ib_logfiles! 100519 16:01:31 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... 100519 16:01:31 InnoDB: Started; log sequence number 0 44556 100519 16:01:31 [ERROR] /Applications/MAMP/Library/libexec/mysqld: unknown option '--skip-bdb' 100519 16:01:31 [ERROR] Aborting And then I got this the next time I tried to run it: InnoDB: Unable to lock /usr/local/mysql/data/ibdata1, error: 35 InnoDB: Check that you do not already have another mysqld process InnoDB: using the same InnoDB data or log files. Sorry that this is a lot of information, but I don't want to leave anything out. Thanks.

    Read the article

  • How to configure TATA Photon+ EC1261 HUAWEI

    - by user3215
    I'm running ubuntu 10.04. I have a newly purchased TATA Photon+ Internet connection which supports Windows and Mac. On the Internet I found a article saying that it could be configured on Linux. I followed the steps to install it on Ubuntu from this link. I am still not able to get online, and need some help. Also, it is very slow, but I was told that I would see speeds up to 3.1MB. I dont have wvdial installed and cannot install it from apt as I'm not connected to internet Booting from windows I dowloaded "wvdial" .deb package and tried to install on ubuntu but it's ended with dependency problem. Automatically, don't know how, I got connected to internet only for once. Immediately I installed wvdial package after this I followed the tutorials(I could not browse and upload the files here) . From then it's showing that the device is connected in the network connections but no internet connection. Once I disable the device, it won't show as connected again and I'll have to restart my system. Sometimes the device itself not detected(wondering if there is any command to re-read the all devices). output of wvdialconf /etc/wvdial.cof: #wvdialconf /etc/wvdial.conf Editing `/etc/wvdial.conf'. Scanning your serial ports for a modem. ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. Modem Port Scan<*1>: S1 S2 S3 WvModem<*1>: Cannot get information for serial port. ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. WvModem<*1>: Cannot get information for serial port. ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud ttyUSB1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. WvModem<*1>: Cannot get information for serial port. ttyUSB2<*1>: ATQ0 V1 E1 -- OK ttyUSB2<*1>: ATQ0 V1 E1 Z -- OK ttyUSB2<*1>: ATQ0 V1 E1 S0=0 -- OK ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK ttyUSB2<*1>: Modem Identifier: ATI -- Manufacturer: +GMI: HUAWEI TECHNOLOGIES CO., LTD ttyUSB2<*1>: Speed 9600: AT -- OK ttyUSB2<*1>: Max speed is 9600; that should be safe. ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK Found a modem on /dev/ttyUSB2. Modem configuration written to /etc/wvdial.conf. ttyUSB2<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" output of wvdial: #wvdial --> WvDial: Internet dialer version 1.60 --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Sending: AT+CRM=1 AT+CRM=1 OK --> Modem initialized. --> Sending: ATDT#777 --> Waiting for carrier. ATDT#777 CONNECT --> Carrier detected. Starting PPP immediately. --> Starting pppd at Sat Oct 16 15:30:47 2010 --> Pid of pppd: 5681 --> Using interface ppp0 --> pppd: (u;[08]@s;[08]`{;[08] --> pppd: (u;[08]@s;[08]`{;[08] --> pppd: (u;[08]@s;[08]`{;[08] --> pppd: (u;[08]@s;[08]`{;[08] --> pppd: (u;[08]@s;[08]`{;[08] --> pppd: (u;[08]@s;[08]`{;[08] --> local IP address 14.96.147.104 --> pppd: (u;[08]@s;[08]`{;[08] --> remote IP address 172.29.161.223 --> pppd: (u;[08]@s;[08]`{;[08] --> primary DNS address 121.40.152.90 --> pppd: (u;[08]@s;[08]`{;[08] --> secondary DNS address 121.40.152.100 --> pppd: (u;[08]@s;[08]`{;[08] Output of log message /var/log/messages: Oct 16 15:29:44 avyakta-desktop pppd[5119]: secondary DNS address 121.242.190.180 Oct 16 15:29:58 desktop pppd[5119]: Terminating on signal 15 Oct 16 15:29:58 desktop pppd[5119]: Connect time 0.3 minutes. Oct 16 15:29:58 desktop pppd[5119]: Sent 0 bytes, received 177 bytes. Oct 16 15:29:58 desktop pppd[5119]: Connection terminated. Oct 16 15:30:47 desktop pppd[5681]: pppd 2.4.5 started by root, uid 0 Oct 16 15:30:47 desktop pppd[5681]: Using interface ppp0 Oct 16 15:30:47 desktop pppd[5681]: Connect: ppp0 <--> /dev/ttyUSB2 Oct 16 15:30:47 desktop pppd[5681]: CHAP authentication succeeded Oct 16 15:30:47 desktop pppd[5681]: CHAP authentication succeeded Oct 16 15:30:48 desktop pppd[5681]: local IP address 14.96.147.104 Oct 16 15:30:48 desktop pppd[5681]: remote IP address 172.29.161.223 Oct 16 15:30:48 desktop pppd[5681]: primary DNS address 121.40.152.90 Oct 16 15:30:48 desktop pppd[5681]: secondary DNS address 121.40.152.100 EDIT 1 : I tried the following sudo stop network-manager sudo killall modem-manager sudo /usr/sbin/modem-manager --debug > ~/mm.log 2>&1 & sudo /usr/sbin/NetworkManager --no-daemon > ~/nm.log 2>&1 & Output of mm.log: #vim ~/mm.log: ** Message: Loaded plugin Option High-Speed ** Message: Loaded plugin Option ** Message: Loaded plugin Huawei ** Message: Loaded plugin Longcheer ** Message: Loaded plugin AnyData ** Message: Loaded plugin ZTE ** Message: Loaded plugin Ericsson MBM ** Message: Loaded plugin Sierra ** Message: Loaded plugin Generic ** Message: Loaded plugin Gobi ** Message: Loaded plugin Novatel ** Message: Loaded plugin Nokia ** Message: Loaded plugin MotoC Output of nm.log: #vim ~/nm.log: NetworkManager: <info> starting... NetworkManager: <info> modem-manager is now available NetworkManager: SCPlugin-Ifupdown: init! NetworkManager: SCPlugin-Ifupdown: update_system_hostname NetworkManager: SCPluginIfupdown: guessed connection type (eth0) = 802-3-ethernet NetworkManager: SCPlugin-Ifupdown: update_connection_setting_from_if_block: name:eth0, type:802-3-ethernet, id:Ifupdown (eth0), uuid: 681b428f-beaf-8932-dce4-678ed5bae28e NetworkManager: SCPlugin-Ifupdown: addresses count: 1 NetworkManager: SCPlugin-Ifupdown: No dns-nameserver configured in /etc/network/interfaces NetworkManager: nm-ifupdown-connection.c.119 - invalid connection read from /etc/network/interfaces: (1) addresses NetworkManager: SCPluginIfupdown: management mode: unmanaged NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:14.4/0000:02:02.0/net/eth1, iface: eth1) NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:14.4/0000:02:02.0/net/eth1, iface: eth1): no ifupdown configuration found. NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo) @

    Read the article

  • Bridged virtual interface is not available or visible to ifconfig.

    - by Omniwombat
    Hello all. I'm running Ubuntu 9.04, kernel 2.6.28-18, and vmware-server 2.0.1. I'm attempting to setup a virtual linux machine to use a bridged interface rather than NAT or host-only. Both NAT and host-only work just fine. When running vmware-config.pl, I set /dev/vmnet0 to bridge eth0, /dev/vmnet1 to host-only, and /dev/vmnet8 to NAT. When I run ifconfig -a I see the physical interface (eth0), vmnet1 and vmnet8 both of which are up and have IP addresses assigned to them. I also see other various interfaces that are not relevant here. In the web console, when I ask that the guest machine's network card be bridged, it states that a bridged setup is "Not available" and shows the disabled device icon. Inside the guest machine, I do have an eth0 interface which I can set to anything I like, however it can't see my external network, or the host. I do see errors in my vmware/hostd.log which state: "The network bridge on device vmnet0 is not running. The virtual machine will not be able to communicate with the host or with other machines on your network" which confirms the problem. vmnet-bridge is running, and I see the following in my process table: /usr/bin/vmnet-bridge -d /var/run/vmnet-bridge-0.pid -n 0 -i eth0 I confirm that the /var/run/vmnet-bridge-0.pid file is there and that it points to the correct process. I saw this question relating to Ubuntu 9.04 and bridged interfaces, in which the poster determined that the vsock library was not getting built due to a flaw in the vmware-config.pl script. I applied the patch, reran the script, and confirm that vsock.ko and vsock.o are in my /lib directory structure. vsock does show up in an lsmod. My /etc/vmware directory has /vmnet1 and /vmnet8 subdirectories. They contain configuration utilities for running DHCP and nat type services as expected. There is no vmnet0 subdirectory. My /etc/vmware/netmap.conf file DOES show entries for vmnet0; both the name and the device as I configured it from the script. My /dev directory contains devices vmnet0 through vmnet9. They have major device number 119, and minor device numbers 0 through 9. /proc/net/dev shows statistics for vmnet1 and vmnet8, but not vmnet0. I have a /proc/vmnet directory, but it's empty. When I start or stop the vmware service with /etc/init.d/vmware start, I see the following: Starting VMware services: Virtual machine monitor done Virtual machine communication interface done VM communication interface socket family: done Virtual ethernet done Bridged networking on /dev/vmnet0 done Host-only networking on /dev/vmnet1 (background) done DHCP server on /dev/vmnet1 done Host-only networking on /dev/vmnet8 (background) done DHCP server on /dev/vmnet8 done NAT service on /dev/vmnet8 done VMware Server Authentication Daemon (background) done Shared Memory Available done Starting VMware management services: VMware Server Host Agent (background) done VMware Virtual Infrastructure Web Access Starting VMware autostart virtual machines: Virtual machines done Nothing appears to be wrong there. What n00b thing am I doing such that vmnet0 and only vmnet0 does not show up in the interface list?

    Read the article

  • What's new in Solaris 11.1?

    - by Karoly Vegh
    Solaris 11.1 is released. This is the first release update since Solaris 11 11/11, the versioning has been changed from MM/YY style to 11.1 highlighting that this is Solaris 11 Update 1.  Solaris 11 itself has been great. What's new in Solaris 11.1? Allow me to pick some new features from the What's New PDF that can be found in the official Oracle Solaris 11.1 Documentation. The updates are very numerous, I really can't include all.  I. New AI Automated Installer RBAC profiles have been introduced to enable delegation of installation tasks. II. The interactive installer now supports installing the OS to iSCSI targets. III. ASR (Auto Service Request) and OCM (Oracle Configuration Manager) have been enabled by default to proactively provide support information and create service requests to speed up support processes. This is optional and can be disabled but helps a lot in supportcases. For further information, see: http://oracle.com/goto/solarisautoreg IV. The new command svcbundle helps you to create SMF manifests without having to struggle with XML editing. (btw, do you know the interactive editprop subcommand in svccfg? The listprop/setprop subcommands are great for scripting and automating, but for an interactive property editing session try, for example, this: svccfg -s svc:/application/pkg/system-repository:default editprop )  V. pfedit: Ever wondered how to delegate editing permissions to certain files? It is well known "sudo /usr/bin/vi /etc/hosts" is not the right way, for sudo elevates the complete vi process to admin levels, and the user can "break" out of the session as root with simply starting a shell from that vi. Now, the new pfedit command provides a solution exactly to this challenge - an auditable, secure, per-user configurable editing possibility. See the pfedit man page for examples.   VI. rsyslog, the popular logging daemon (filters, SSL, formattable output, SQL collect...) has been included in Solaris 11.1 as an alternative to syslog.  VII: Zones: Solaris Zones - as a major Solaris differentiator - got lots of love in terms of new features: ZOSS - Zones on Shared Storage: Placing your zones to shared storage (FC, iSCSI) has never been this easy - via zonecfg.  parallell updates - with S11's bootenvironments updating zones was no problem and meant no downtime anyway, but still, now you can update them parallelly, a way faster update action if you are running a large number of zones. This is like parallell patching in Solaris 10, but with all the IPS/ZFS/S11 goodness.  per-zone fstype statistics: Running zones on a shared filesystems complicate the I/O debugging, since ZFS collects all the random writes and delivers them sequentially to boost performance. Now, over kstat you can find out which zone's I/O has an impact on the other ones, see the examples in the documentation: http://docs.oracle.com/cd/E26502_01/html/E29024/gmheh.html#scrolltoc Zones got RDSv3 protocol support for InfiniBand, and IPoIB support with Crossbow's anet (automatic vnic creation) feature.  NUMA I/O support for Zones: customers can now determine the NUMA I/O topology of the system from within zones.  VIII: Security got a lot of attention too:  Automated security/audit reporting, with builtin reporting templates e.g. for PCI (payment card industry) audits.  PAM is now configureable on a per-user basis instead of system wide, allowing different authentication requirements for different users  SSH in Solaris 11.1 now supports running in FIPS 140-2 mode, that is, in a U.S. government security accredited fashion.  SHA512/224 and SHA512/256 cryptographic hash functions are implemented in a FIPS-compliant way - and on a T4 implemented in silicon! That is, goverment-approved cryptography at HW-speed.  Generally, Solaris is currently under evaluation to be both FIPS and Common Criteria certified.  IX. Networking, as one of the core strengths of Solaris 11, has been extended with:  Data Center Bridging (DCB) - not only setups where network and storage share the same fabric (FCoE, anyone?) can have Quality-of-Service requirements. DCB enables peers to distinguish traffic based on priorities. Your NICs have to support DCB, see the documentation, and additional information on Wikipedia. DataLink MultiPathing, DLMP, enables link aggregation to span across multiple switches, even between those of different vendors. But there are essential differences to the good old bandwidth-aggregating LACP, see the documentation: http://docs.oracle.com/cd/E26502_01/html/E28993/gmdlu.html#scrolltoc VNIC live migration is now supported from one physical NIC to another on-the-fly  X. Data management:  FedFS, (Federated FileSystem) is new, it relies on Solaris 11's NFS referring mechanism to join separate shares of different NFS servers into a single filesystem namespace. The referring system has been there since S11 11/11, in Solaris 11.1 FedFS uses a LDAP - as the one global nameservice to bind them all.  The iSCSI initiator now uses the T4 CPU's HW-implemented CRC32 algorithm - thus improving iSCSI throughput while reducing CPU utilization on a T4 Storage locking improvements are now RAC aware, speeding up throughput with better locking-communication between nodes up to 20%!  XI: Kernel performance optimizations: The new Virtual Memory subsystem ("VM2") scales now to 100+ TB Memory ranges.  The memory predictor monitors large memory page usage, and adjust memory page sizes to applications' needs OSM, the Optimized Shared Memory allows Oracle DBs' SGA to be resized online XII: The Power Aware Dispatcher in now by default enabled, reducing power consumption of idle CPUs. Also, the LDoms' Power Management policies and the poweradm settings in Solaris 11 OS will cooperate. XIII: x86 boot: upgrade to the (Grand Unified Bootloader) GRUB2. Because grub2 differs in the configuration syntactically from grub1, one shall not edit the new grub configuration (grub.cfg) but use the new bootadm features to update it. GRUB2 adds UEFI support and also support for disks over 2TB. XIV: Improved viewing of per-CPU statistics of mpstat. This one might seem of less importance at first, but nowadays having better sorting/filtering possibilities on a periodically updated mpstat output of 256+ vCPUs can be a blessing. XV: Support for Solaris Cluster 4.1: The What's New document doesn't actually mention this one, since OSC 4.1 has not been released at the time 11.1 was. But since then it is available, and it requires Solaris 11.1. And it's only a "pkg update" away. ...aand I seriously need to stop here. There's a lot I missed, Edge Virtual Bridging, lofi tuning, ZFS sharing and crypto enhancements, USB3.0, pulseaudio, trusted extensions updates, etc - but if I mention all those then I effectively copy the What's New document. Which I recommend reading now anyway, it is a great extract of the 300+ new projects and RFE-followups in S11.1. And this blogpost is a summary of that extract.  For closing words, allow me to come back to Request For Enhancements, RFEs. Any customer can request features. Open up a Support Request, explain that this is an RFE, describe the feature you/your company desires to have in S11 implemented. The more SRs are collected for an RFE, the more chance it's got to get implemented. Feel free to provide feedback about the product, as well as about the Solaris 11.1 Documentation using the "Feedback" button there. Both the Solaris engineers and the documentation writers are eager to hear your input.Feel free to comment about this post too. Except that it's too long ;)  wbr,charlie

    Read the article

  • Alternative Methods of Sharing Folders in Windows?

    - by Blaenk
    Hey guys. I'm running Windows 7 and as of now I simply share folders as one usually does in Windows. I then have a MacBook with Leopard (Now Snow Leopard) which I use to connect to my computer to mount the shares by going to Finder, then CMD + K and typing smb://BlaenkPC (The name of my PC) into the address box. This consequently connects to my computer and mounts all of the shares. The problem is that sometimes, if for example I close my MacBook (Which makes it go to sleep) or sometimes even without doing that, the connection somehow drops. Sometimes I close the MacBook and upon re-opening it, everything still works; it's random. It still shows the computer as being connected, but it just shows 'loading' indefinitely. If I hit 'eject' with the intention of re-connecting to the computer, it disappears from the sidebar (The Computer Icon) in Finder, but I cannot re-connect. Activity Monitor (or ps aux, whichever) both show hung instances of umount; one for each share that was mounted. I cannot kill these processes with kill or killall (Yes, even with sudo, and sending signal -9). This has happened to me before, and here is another person who has experienced this. My question boils down to this: Is there an alternative method of sharing folders in Windows, that my Mac can read/understand, that is possibly more reliable and preferably just as fast? I usually use the mounted shares to watch television episodes off my computer, or movies, etc. (In other words, I open them in VLC and they automatically stream from my computer). As far as I can tell, this is a problem with the Samba protocol. I have heard of NFS, but I am not sure if I would have to re-format my drives, or what. I don't mind running a service or daemon to allow the sharing of the folders, I just want it to be done and hopefully in a better way than typical Windows shares through Samba. Usually when I encounter this problem, which is often (read: every day), I have no other option but to restart the MacBook. As I stated in the first question I linked to, shutting down and restarting don't work; I have to manually force the shutdown by holding the power button. I have not modified my installation of Mac OS X in any hackish way, so I doubt it's something with the Operating System, but worst come to worst, I might end up reformatting and doing a clean install to see if that fixes anything, as I am at a complete loss as to what may be causing the problem, and no one else seems to have any idea or care, despite there being quite a few people suffering from this problem, as my research has shown. Any pieces of information that can help are extremely appreciated. You don't have to answer every question on here, but maybe even some insight as to why it might not be possible to kill those hung umount instances for example, or why I may not be able to reconnect using samba (Is it something regarding the way the protocol works?). One thing to note is that I have another computer in the home network that doesn't seem to have this problem. However, it is also running Windows 7 (Note though that I am not using the homegroup feature, but the typical windows sharing feature). My only deduction is that the problem is being caused by the way the Mac (Or Samba implementation, whichever) is handling things. Perhaps it is a limitation.

    Read the article

  • AppHarbor - Azure Done Right AKA Heroku for .NET

    - by Robz / Fervent Coder
    Easy and Instant deployments and instant scale for .NET? Awhile back a few of us were looking at Ruby Gems as the answer to package management for .NET. The gems platform supported the concept of DLLs as packages although some changes would have needed to happen to have long term use for the entire community. From that we formed a partnership with some folks at Microsoft to make v2 into something that would meet wider adoption across the community, which people now call NuGet. So now we have the concept of package management. What comes next? Heroku Instant deployments and instant scaling. Stupid simple API. This is Heroku. It doesn’t sound like much, but when you think of how fast you can go from an idea to having someone else tinker with it, you can start to see its power. In literally seconds you can be looking at your rails application deployed and online. Then when you are ready to scale, you can do that. This is power. Some may call this “cloud-computing” or PaaS (Platform as a Service). I first ran into Heroku back in July when I met Nick of RubyGems.org. At the time there was no alternative in the .NET-o-sphere. I don’t count Windows Azure, mostly because it is not simple and I don’t believe there is a free version. Heroku itself would not lend itself well to .NET due to the nature of platforms and each language’s specific needs (solution stack).  So I tucked the idea in the back of my head and moved on. AppHarbor Enters The Scene I’m not sure when I first heard about AppHarbor as a possible .NET version of Heroku. It may have been in November, but I didn’t actually try it until January. I was instantly hooked. AppHarbor is awesome! It still has a ways to go to be considered Heroku for .NET, but it already has a growing community. I created a video series (at the bottom of this post) that really highlights how fast you can get a product onto the web and really shows the power and simplicity of AppHarbor. Deploying is as simple as a git/hg push to appharbor. From there they build your code, run any unit tests you have and deploy it if everything succeeds. The screen on the right shows a simple and elegant UI to getting things done. The folks at AppHarbor graciously gave me a limited number of invites to hand out. If you are itching to try AppHarbor then navigate to: https://appharbor.com/account/new?inviteCode=ferventcoder  After playing with it, send feedback if you want more features. Go vote up two features I want that will make it more like Heroku. Disclaimer: I am in no way affiliated with AppHarbor and have not received any funds or favors from anyone at AppHarbor. I just think it is awesome and I want others to know about it. From Zero To Deployed in 15 Minutes (Or Less) Now I have a challenge for you. I created a video series showing how fast I could go from nothing to a deployed application. It could have been from Zero to Deployed in Less than 5 minutes, but I wanted to show you the tools a little more and give you an opportunity to beat my time. And that’s the challenge. Beat my time and show it in a video response. The video series is below (at least one of the videos has to be watched on YouTube). The person with the best time by March 15th @ 11:59PM CST will receive a prize. Ground rules: .NET Application with a valid database connection Start from Zero Deployed with AppHarbor or an alternative A timer displayed in the video that runs during the entire process Video response published on YouTube or acceptable alternative Video(s) must be published by March 15th at 11:59PM CST. Either post the link here as a comment or on YouTube as a response (also by 11:59PM CST March 15th) From Zero To Deployed In 15 Minutes (Or Less) Part 1 From Zero To Deployed In 15 Minutes (Or Less) Part 2 From Zero To Deployed In 15 Minutes (Or Less) Part 3

    Read the article

  • Launchd item no longer firing in Snow Leopard

    - by ridogi
    A launchd item that was working in 10.5 is no longer working after my upgrade to 10.6. I am running 10.6.2 and I have recreated the launchd item and given it a new name and that one doesn't run either. I have found a link of people with the same problem on google groups but none of the advice in that link helps. My launchd item is not listed in /private/var/db/launchd.db/com.apple.launchd/overrides.plist or in any of the overrides.plist files in the subdirectories of /private/var/db/launchd.db/ I have also tried to set this up as both a user agent and a user daemon. My launchd item simply runs a shell script, which I have no problem launching manually. <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Label</key> <string>com.eric.tmnotify.launchd</string> <key>ProgramArguments</key> <array> <string>/<path_to>/tmnotify.sh</string> </array> <key>StartInterval</key> <integer>3600</integer> </dict> </plist> I have tried to load it by overriding the disabled key (even though it is not disabled in any of the overrides.plist files) with both: sudo launchctl load -F /Users/eric/Library/LaunchAgents/com.eric.tmnotify.launchd.plist sudo launchctl load -w /Users/eric/Library/LaunchAgents/com.eric.tmnotify.launchd.plist and after running either of them I can see that it is running by using sudo launchctl list but the shell script never fires. Edit: I have also put this in the formerly blank file at /private/var/db/launchd.db/com.apple.launchd.peruser.501/overrides.plist : <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>com.eric.tmnotify.launchd</key> <dict> <key>Disabled</key> <false/> </dict> </dict> </plist> I also tried inserting this alphabetically: <key>com.eric.tmnotify.launchd</key> <dict> <key>Disabled</key> <false/> </dict> into the file /private/var/db/launchd.db/com.apple.launchd/overrides.plist but still no dice.

    Read the article

  • Dealing with "I-am-cool-and-you-are-dumb" manager [closed]

    - by Software Guy
    I have been working with a software company for about 6 months now. I like the projects I work on there and I really like all the people there except for 1 guy. That guy is technically smart, and he is a co-founder of the company. He is an okay guy in person (the kind you wouldn't want to care about much) but things get tricky when he is your manager. In general I am all okay but there are times when I feel I am not being treated fairly: He doesn't give much thought to when he makes mistakes and when I do something similar, he is super critical. Recently he went as far as to say "I am not sure if I can trust you with this feature". The detais of this specific case are this: I was working on this feature, and I was already a couple of hours over my normal working hours, and then I decided to stop and continue tomorrow. We use git, and I like to commit changes locally and only push when I feel they are ready. This manager insists that I push all the changes to the central repo (in case my hard drive crashes). So I push the change, and the ticket is marked as "to be tested". Next day I come in, he sits next to me and starts complaining and says that I posted above. I really didn't know what to say, I tried to explain to him that the ticket is still being worked upon but he didn't seem to listen. He interrupts me in-between when I am coding, which I do not mind, but when I do that same, his face turns like this :| and reacts as if his work was super important and I am just wasting his time. He asks me to accumulate all questions, and then ask him altogether which is not always possible, as you need a clarification before you can continue on a feature implementation. And when I am coding, he talks on the phone with his customers next to me (when he can go to the meeting room with his laptop) and doesn't care. He made me switch to a whole new IDE (from Netbeans to a commercial IDE costing a lot of money) for a really tiny feature (which I later found out was in Netbeans as well!). I didn't make a big deal out of it as I am equally comfortable working with this new IDE, but I couldn't get the science behind his obsession. He said this feature makes sure that if any method is updated by a programmer, the IDE will turn the method name to red in places where it is used. I told him that I do not have a problem since I always search for method usage in the project and make sure its updated. IDEs even have refactoring features for exactly that, but... I recently implemented a feature for a project, and I was happy about it and considering him a senior, I asked him his comments about the implementation quality.. he thought long and hard, made a few funny faces, and when he couldn't find anything, he said "ummm, your program will crash if JS is disabled" - he was wrong, since I had made sure it would work fine with default values even if JS was disabled. I told him that and then he said "oh okay". BUT, the funny thing is, a few days back, he implemented something and I objected with "But that would not run if JS is disabled" and his response was "We don't have to care about people who disable JS" :-/ Once he asked me to investigate if there was a way to modify a CMS generated menu programmatically by extending the CMS, I did my research and told him that the only was is to inject a menu item using JavaScript / jQuery and his reaction was "ah that's ugly, and hacky, not acceptable" and two days later, I see that feature implemented in the same way as I had suggested. The point is, his reaction was not respectful at all, even if what I proposed was hacky, he should be respectful, that I know what's hacky and if I am suggesting something hacky, there must be a reason for it. There are plenty of other reasons / examples where I feel I am not being treated fairly. I want your advice as to what is it that I am doing wrong and how to deal with such a situation. The other guys in the team are actually very good people, and I do not want to leave the job either (although I could, if I want to). All I want is respect and equal treatment. I have thought about talking to this guy in a face to face meeting, but that worries me that his attitude might get worse and make things more difficult for me (since he doesn't seem to be the guy who thinks he can be wrong too). I am also considering talking to the other co-founder but I am not sure how he will take it (as both founders have been friends forever). Thanks for reading the long message, I really appreciate your help.

    Read the article

  • dns queries not using nscd for caching

    - by xenoterracide
    I'm trying to use nscd (Nameservices Cache Daemon) to cache dns locally so I can stop using bind to do it. I've gotten it started and ntpd seems to attempt to use it. But everything else for hosts seems to ignore it. e.g if I do dig apache.org 3 times none of them will hit the cache. I'm viewing the cache stats using nscd -g to determine whether it's been used. I've also turned the debug log level up to see if I can see it hitting and the queries don't even hit nscd. nsswitch.conf # Begin /etc/nsswitch.conf passwd: files group: files shadow: files publickey: files hosts: cache files dns networks: files protocols: files services: files ethers: files rpc: files netgroup: files # End /etc/nsswitch.confenter code here nscd.conf # # /etc/nscd.conf # # An example Name Service Cache config file. This file is needed by nscd. # # Legal entries are: # # logfile <file> # debug-level <level> # threads <initial #threads to use> # max-threads <maximum #threads to use> # server-user <user to run server as instead of root> # server-user is ignored if nscd is started with -S parameters # stat-user <user who is allowed to request statistics> # reload-count unlimited|<number> # paranoia <yes|no> # restart-interval <time in seconds> # # enable-cache <service> <yes|no> # positive-time-to-live <service> <time in seconds> # negative-time-to-live <service> <time in seconds> # suggested-size <service> <prime number> # check-files <service> <yes|no> # persistent <service> <yes|no> # shared <service> <yes|no> # max-db-size <service> <number bytes> # auto-propagate <service> <yes|no> # # Currently supported cache names (services): passwd, group, hosts, services # logfile /var/log/nscd.log threads 4 max-threads 32 server-user nobody # stat-user somebody debug-level 9 # reload-count 5 paranoia no # restart-interval 3600 enable-cache passwd yes positive-time-to-live passwd 600 negative-time-to-live passwd 20 suggested-size passwd 211 check-files passwd yes persistent passwd yes shared passwd yes max-db-size passwd 33554432 auto-propagate passwd yes enable-cache group yes positive-time-to-live group 3600 negative-time-to-live group 60 suggested-size group 211 check-files group yes persistent group yes shared group yes max-db-size group 33554432 auto-propagate group yes enable-cache hosts yes positive-time-to-live hosts 3600 negative-time-to-live hosts 20 suggested-size hosts 211 check-files hosts yes persistent hosts yes shared hosts yes max-db-size hosts 33554432 enable-cache services yes positive-time-to-live services 28800 negative-time-to-live services 20 suggested-size services 211 check-files services yes persistent services yes shared services yes max-db-size services 33554432 resolv.conf # Generated by dhcpcd from eth0 nameserver 127.0.0.1 domain westell.com nameserver 192.168.1.1 nameserver 208.67.222.222 nameserver 208.67.220.220 as kind of a side note I'm using archlinux.

    Read the article

  • Can't re-mount existing RAID10 on Ubuntu

    - by Zoran
    I saw similar questions, but didn't find what solution to my problem. After power-cut, one of RAID10 (4 disks were) appears to be malfunctioning. I make tha array active one, but can not mount it. Always the same error: mount: you must specify the filesystem type So, here is what I have when type mdadm --detail /dev/md0 /dev/md0: Version : 00.90.03 Creation Time : Tue Sep 1 11:00:40 2009 Raid Level : raid10 Array Size : 1465148928 (1397.27 GiB 1500.31 GB) Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 4 Total Devices : 3 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Mon Jun 11 09:54:27 2012 State : clean, degraded Active Devices : 3 Working Devices : 3 Failed Devices : 0 Spare Devices : 0 Layout : near=2, far=1 Chunk Size : 64K UUID : 1a02e789:c34377a1:2e29483d:f114274d Events : 0.166 Number Major Minor RaidDevice State 0 8 16 0 active sync /dev/sdb 1 0 0 1 removed 2 8 48 2 active sync /dev/sdd 3 8 64 3 active sync /dev/sde At the /etc/mdadm/mdadm.conf I have by default, scan all partitions (/proc/partitions) for MD superblocks. alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes automatically tag new arrays as belonging to the local system HOMEHOST <system> instruct the monitoring daemon where to send mail alerts MAILADDR root definitions of existing MD arrays ARRAY /dev/md0 level=raid10 num-devices=4 UUID=1a02e789:c34377a1:2e29483d:f114274d ARRAY /dev/md1 level=raid1 num-devices=2 UUID=9b592be7:c6a2052f:2e29483d:f114274d This file was auto-generated... So, my question is, how can I mount md0 array (md1 has been mounted without problem) in order to preserve existing data? One more thing, fdisk -l command gives the following result: Disk /dev/sdb: 750.1 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x660a6799 Device Boot Start End Blocks Id System /dev/sdb1 * 1 88217 708603021 83 Linux /dev/sdb2 88218 91201 23968980 5 Extended /dev/sdb5 88218 91201 23968948+ 82 Linux swap / Solaris Disk /dev/sdc: 750.1 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x0008f8ae Device Boot Start End Blocks Id System /dev/sdc1 1 88217 708603021 83 Linux /dev/sdc2 88218 91201 23968980 5 Extended /dev/sdc5 88218 91201 23968948+ 82 Linux swap / Solaris Disk /dev/sdd: 750.1 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x4be1abdb Device Boot Start End Blocks Id System Disk /dev/sde: 750.1 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xa4d5632e Device Boot Start End Blocks Id System Disk /dev/sdf: 750.1 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xdacb141c Device Boot Start End Blocks Id System Disk /dev/sdg: 750.1 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xdacb141c Device Boot Start End Blocks Id System Disk /dev/md1: 750.1 GB, 750156251136 bytes 2 heads, 4 sectors/track, 183143616 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk identifier: 0xdacb141c Device Boot Start End Blocks Id System Warning: ignoring extra data in partition table 5 Warning: ignoring extra data in partition table 5 Warning: ignoring extra data in partition table 5 Warning: invalid flag 0x7b6e of partition table 5 will be corrected by w(rite) Disk /dev/md0: 1500.3 GB, 1500312502272 bytes 255 heads, 63 sectors/track, 182402 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x660a6799 Device Boot Start End Blocks Id System /dev/md0p1 * 1 88217 708603021 83 Linux /dev/md0p2 88218 91201 23968980 5 Extended /dev/md0p5 ? 121767 155317 269488144 20 Unknown And one more thing. When using mdadm --examine command, here ise result: mdadm -v --examine --scan /dev/sdb /dev/sdc /dev/sdd /dev/sde /dev/sdf /dev/sd ARRAY /dev/md1 level=raid1 num-devices=2 UUID=9b592be7:c6a2052f:2e29483d:f114274d devices=/dev/sdf ARRAY /dev/md0 level=raid10 num-devices=4 UUID=1a02e789:c34377a1:2e29483d:f114274d devices=/dev/sdb,/dev/sdc,/dev/sdd,/dev/sde md0 has 3 devices which are active. Can someone instruct me how to solve this issue? If it is possible, I would like not to removing faulty HDD. Please advise

    Read the article

  • mysqld service crashes on restart, after importing mysqldump #innodb

    - by ubunut
    I have 2 mysql servers. Let's call them server01 & server02. Both have the same configuration: mysqladmin Ver 8.42 Distrib 5.1.61, for redhat-linux-gnu on x86_64 [client] default-character-set=utf8 [mysqld] datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock user=mysql # Disabling symbolic-links is recommended to prevent assorted security risks symbolic-links=0 max_allowed_packet = 16M default-character-set=utf8 default-collation=utf8_unicode_ci character-set-server=utf8 collation-server=utf8_unicode_ci default-storage-engine = InnoDB innodb_data_home_dir = /var/lib/mysql innodb_log_group_home_dir = /var/lib/mysql innodb_data_file_path = ibdata1:10M:autoextend innodb_additional_mem_pool_size = 2M innodb_log_file_size = 5M innodb_log_buffer_size = 8M innodb_lock_wait_timeout = 50 innodb_flush_log_at_trx_commit = 1 innodb_buffer_pool_size = 700M table_cache = 300 thread_cache_size = 4 query_cache_size = 200m query_cache_limit = 10m [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid I make a mysqldump on server01: mysqldump -uuser -ppassword --all-databases testservers.sql (most tables in these databases are innodb, some of the mysql.* tables are Innodb too) Then I import the testservers.sql on server02: mysql -uuser < testservers.sql (mysqld has been started with --skip-network). So far so good, I can login into mysql & everything seems to be ok. BUT when I exit to the shell and execute service mysqld restart, The service fails to start. stack-trace in /var/log/mysqld.log: 121022 14:53:19 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql 121022 14:53:19 [Warning] '--default-character-set' is deprecated and will be removed in a future release. Please use '--character-set-server' instead. 121022 14:53:19 [Warning] '--default-collation' is deprecated and will be removed in a future release. Please use '--collation-server' instead. 12:53:19 UTC - mysqld got signal 11 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8384512 read_buffer_size=131072 max_used_connections=0 max_threads=151 thread_count=0 connection_count=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 338324 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. Thread pointer: 0x267e630 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 7fff3efe0be0 thread_stack 0x40000 /usr/libexec/mysqld(my_print_stacktrace+0x29) [0x84bd89] /usr/libexec/mysqld(handle_fatal_signal+0x483) [0x6a0be3] /lib64/libpthread.so.0() [0x338d60f500] /usr/libexec/mysqld(ha_resolve_by_name(THD*, st_mysql_lex_string const*)+0x81) [0x6956e1] /usr/libexec/mysqld(open_table_def(THD*, st_table_share*, unsigned int)+0xe0a) [0x60e5ba] /usr/libexec/mysqld(get_table_share(THD*, TABLE_LIST*, char*, unsigned int, unsigned int, int*)+0x20b) [0x602b0b] /usr/libexec/mysqld() [0x603597] /usr/libexec/mysqld(open_table(THD*, TABLE_LIST*, st_mem_root*, bool*, unsigned int)+0x7a1) [0x6079a1] /usr/libexec/mysqld(open_tables(THD*, TABLE_LIST**, unsigned int*, unsigned int)+0x5d0) [0x608570] /usr/libexec/mysqld(open_and_lock_tables_derived(THD*, TABLE_LIST*, bool)+0x6a) [0x60877a] /usr/libexec/mysqld(plugin_init(int*, char**, int)+0x622) [0x715af2] /usr/libexec/mysqld() [0x5bd3b2] /usr/libexec/mysqld(main+0x1b3) [0x5bfc93] /lib64/libc.so.6(__libc_start_main+0xfd) [0x338d21ecdd] /usr/libexec/mysqld() [0x5087b9] Trying to get some variables. Some pointers may be invalid and cause the dump to abort. Query (0): is an invalid pointer Connection ID (thread ID): 0 Status: NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash. 121022 14:53:19 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended A typical mysqdump entry looks like this: DROP TABLE IF EXISTS `adodb_logsql`; /*!40101 SET @saved_cs_client = @@character_set_client */; /*!40101 SET character_set_client = utf8 */; CREATE TABLE `adodb_logsql` ( `id` bigint(10) unsigned NOT NULL AUTO_INCREMENT, `created` datetime NOT NULL, `sql0` varchar(250) NOT NULL DEFAULT '', `sql1` text, `params` text, `tracer` text, `timer` decimal(16,6) NOT NULL DEFAULT '0.000000', PRIMARY KEY (`id`) ) ENGINE=InnoDB DEFAULT CHARSET=utf8 COMMENT='to save some logs from ADOdb'; /*!40101 SET character_set_client = @saved_cs_client */; IF I change all occurrences of "ENGINE=InnoDB" to "ENGINE=MyISAM" before import, then the service has no problem restarting. I'm quite puzzled as to what's happening, maybe I'm just an idiot, then by all means tell me so. Any help would be greatly appreciated!

    Read the article

  • Why don't mails show up in the recipient's mailspool?

    - by Jason
    I have postfix dovecot running with local email system on thunderbird. I have two users on by ubuntu, mailuser 1 and mailuser 2 whom i added to thunderbird. Everything went fine, except the users dont have anything on their inbox on thunderbird and sent mails dont get through. Im using maildir as well. Checking /var/log/mail.log reveals this This what is happining: Restarting postfix and dovecot and then sending mail from one user to another user... I believe this line is the problem May 30 18:31:55 postfix/smtpd[12804]: disconnect from localhost[127.0.0.1] Why is it not connecting ? What could be wrong ? /var/log/mail.log May 30 18:30:21 dovecot: imap: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) May 30 18:30:21 dovecot: master: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) May 30 18:30:21 dovecot: imap: Server shutting down. in=467 out=475 May 30 18:30:21 dovecot: config: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) May 30 18:30:21 dovecot: log: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) May 30 18:30:21 dovecot: anvil: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) May 30 18:30:21 dovecot: master: Dovecot v2.2.9 starting up (core dumps disabled) May 30 18:30:54 dovecot: imap-login: Login: user=<mailuser2>, method=PLAIN, rip=::1, lip=::1, mpid=12638, TLS, session=<xUfQkaD66gAAAAAAAAAAAAAAAAAAAAAB> May 30 18:31:04 postfix/master[12245]: terminating on signal 15 May 30 18:31:04 postfix/master[12795]: daemon started -- version 2.11.0, configuration /etc/postfix May 30 18:31:55 postfix/postscreen[12803]: CONNECT from [127.0.0.1]:33668 to [127.0.0.1]:25 May 30 18:31:55 postfix/postscreen[12803]: WHITELISTED [127.0.0.1]:33668 May 30 18:31:55 postfix/smtpd[12804]: connect from localhost[127.0.0.1] May 30 18:31:55 postfix/smtpd[12804]: 1ED7120EB9: client=localhost[127.0.0.1] May 30 18:31:55 postfix/cleanup[12809]: 1ED7120EB9: message-id=<[email protected]> May 30 18:31:55 postfix/qmgr[12799]: 1ED7120EB9: from=<[email protected]>, size=546, nrcpt=1 (queue active) May 30 18:31:55 postfix/local[12810]: 1ED7120EB9: to=<mailuser2@mysitecom>, relay=local, delay=0.03, delays=0.02/0.01/0/0, dsn=2.0.0, status=sent (delivered to maildir) May 30 18:31:55 postfix/qmgr[12799]: 1ED7120EB9: removed May 30 18:31:55 postfix/smtpd[12804]: disconnect from localhost[127.0.0.1] May 30 18:31:55 dovecot: imap-login: Login: user=<mailuser1>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=12814, TLS, session=<sD9plaD6PgB/AAAB> This is my postfix main.cf See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. smtpd_relay_restrictions = permit_mynetworks permit_sasl_authenticated defer_unauth_destination myhostname = server mydomain = mysite.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = $mydomain mydestination = mysite.com #relayhost = smtp.192.168.10.1.com mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 192.168.10.0/24 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all home_mailbox = Maildir / mailbox_command= All ports are listening tcp 0 0 *:imaps *:* LISTEN tcp 0 0 *:submission *:* LISTEN tcp 0 0 *:imap2 *:* LISTEN tcp 0 0 s148134.s148134.:domain *:* LISTEN tcp 0 0 192.168.56.101:domain *:* LISTEN tcp 0 0 10.0.2.15:domain *:* LISTEN tcp 0 0 localhost:domain *:* LISTEN tcp 0 0 *:ssh *:* LISTEN tcp 0 0 *:smtp *:* LISTEN tcp 0 0 localhost:953 *:* LISTEN tcp6 0 0 [::]:imaps [::]:* LISTEN tcp6 0 0 [::]:submission [::]:* LISTEN tcp6 0 0 [::]:imap2 [::]:* LISTEN tcp6 0 0 [::]:domain [::]:* LISTEN tcp6 0 0 [::]:ssh [::]:* LISTEN tcp6 0 0 [::]:smtp [::]:* LISTEN tcp6 0 0 localhost:953 [::]:* LISTEN

    Read the article

  • What's up with LDoms: Part 5 - A few Words about Consoles

    - by Stefan Hinker
    Back again to look at a detail of LDom configuration that is often forgotten - the virtual console server. Remember, LDoms are SPARC systems.  As such, each guest will have it's own OBP running.  And to connect to that OBP, the administrator will need a console connection.  Since it's OBP, and not some x86 BIOS, this console will be very serial in nature ;-)  It's really very much like in the good old days, where we had a terminal concentrator where all those serial cables ended up in.  Just like with other components in LDoms, the virtualized solution looks very similar. Every LDom guest requires exactly one console connection.  Envision this similar to the RS-232 port on older SPARC systems.  The LDom framework provides one or more console services that provide access to these connections.  This would be the virtual equivalent of a network terminal server (NTS), where all those serial cables are plugged in.  In the physical world, we'd have a list somewhere, that would tell us which TCP-Port of the NTS was connected to which server.  "ldm list" does just that: root@sun # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-cv- UART 16 7680M 0.4% 27d 8h 22m jupiter bound ------ 5002 20 8G mars active -n---- 5000 2 8G 0.5% 55d 14h 10m venus active -n---- 5001 2 8G 0.5% 56d 40m pluto inactive ------ 4 4G The column marked "CONS" tells us, where to reach the console of each domain. In the case of the primary domain, this is actually a (more) physical connection - it's the console connection of the physical system, which is either reachable via the ILOM of that system, or directly via the serial console port on the chassis. All the other guests are reachable through the console service which we created during the inital setup of the system.  Note that pluto does not have a port assigned.  This is because pluto is not yet bound.  (Binding can be viewed very much as the assembly of computer parts - CPU, Memory, disks, network adapters and a serial console cable are all put together when binding the domain.)  Unless we set the port number explicitly, LDoms Manager will do this on a first come, first serve basis.  For just a few domains, this is fine.  For larger deployments, it might be a good idea to assign these port numbers manually using the "ldm set-vcons" command.  However, there is even better magic associated with virtual consoles. You can group several domains into one console group, reachable through one TCP port of the console service.  This can be useful when several groups of administrators are to be given access to different domains, or for other grouping reasons.  Here's an example: root@sun # ldm set-vcons group=planets service=console jupiter root@sun # ldm set-vcons group=planets service=console pluto root@sun # ldm bind jupiter root@sun # ldm bind pluto root@sun # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-cv- UART 16 7680M 6.1% 27d 8h 24m jupiter bound ------ 5002 200 8G mars active -n---- 5000 2 8G 0.6% 55d 14h 12m pluto bound ------ 5002 4 4G venus active -n---- 5001 2 8G 0.5% 56d 42m root@sun # telnet localhost 5002 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. sun-vnts-planets: h, l, c{id}, n{name}, q:l DOMAIN ID DOMAIN NAME DOMAIN STATE 2 jupiter online 3 pluto online sun-vnts-planets: h, l, c{id}, n{name}, q:npluto Connecting to console "pluto" in group "planets" .... Press ~? for control options .. What I did here was add the two domains pluto and jupiter to a new console group called "planets" on the service "console" running in the primary domain.  Simply using a group name will create such a group, if it doesn't already exist.  By default, each domain has its own group, using the domain name as the group name.  The group will be available on port 5002, chosen by LDoms Manager because I didn't specify it.  If I connect to that console group, I will now first be prompted to choose the domain I want to connect to from a little menu. Finally, here's an example how to assign port numbers explicitly: root@sun # ldm set-vcons port=5044 group=pluto service=console pluto root@sun # ldm bind pluto root@sun # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-cv- UART 16 7680M 3.8% 27d 8h 54m jupiter active -t---- 5002 200 8G 0.5% 30m mars active -n---- 5000 2 8G 0.6% 55d 14h 43m pluto bound ------ 5044 4 4G venus active -n---- 5001 2 8G 0.4% 56d 1h 13m With this, pluto would always be reachable on port 5044 in its own exclusive console group, no matter in which order other domains are bound. Now, you might be wondering why we always have to mention the console service name, "console" in all the examples here.  The simple answer is because there could be more than one such console service.  For all "normal" use, a single console service is absolutely sufficient.  But the system is flexible enough to allow more than that single one, should you need them.  In fact, you could even configure such a console service on a domain other than the primary (or control domain), which would make that domain a real console server.  I actually have a customer who does just that - they want to separate console access from the control domain functionality.  But this is definately a rather sophisticated setup. Something I don't want to go into in this post is access control.  vntsd, which is the daemon providing all these console services, is fully RBAC-aware, and you can configure authorizations for individual users to connect to console groups or individual domain's consoles.  If you can't wait until I get around to security, check out the man page of vntsd. Further reading: The Admin Guide is rather reserved on this subject.  I do recommend to check out the Reference Manual. The manpage for vntsd will discuss all the control sequences as well as the grouping and authorizations mentioned here.

    Read the article

  • Squid not caching files (Randomly)

    - by Heinrich
    I want to use an intercepting squid server to cache specific large zip files that users in my network download frequently. I have configured squid on a gateway machine and caching is working for "static" zip files that are served from an Apache web server outside our network. The files that I want to have cached by squid are zip files 100MB which are served from a heroku-hosted Rails application. I set an ETag header (SHA hash of the zip file on the server) and Cache-Control: public header. However, these files are not cached by squid. This, for example, is a request that is not cached: $ curl --no-keepalive -v -o test.zip --header "X-Access-Key: 20767ed397afdea90601fda4513ceb042fe6ab4e51578da63d3bc9b024ed538a" --header "X-Customer: 5" "http://MY_APP.herokuapp.com/api/device/v1/media/download?version=latest" * Adding handle: conn: 0x7ffd4a804400 * Adding handle: send: 0 * Adding handle: recv: 0 ... > GET /api/device/v1/media/download?version=latest HTTP/1.1 > User-Agent: curl/7.30.0 > Host: MY_APP.herokuapp.com > Accept: */* > X-Access-Key: 20767ed397afdea90601fda4513ceb042fe6ab4e51578da63d3bc9b024ed538a > X-Customer: 5 > 0 0 0 0 0 0 0 0 --:--:-- 0:00:09 --:--:-- 0< HTTP/1.1 200 OK * Server Cowboy is not blacklisted < Server: Cowboy < Date: Mon, 18 Aug 2014 14:13:27 GMT < Status: 200 OK < X-Frame-Options: SAMEORIGIN < X-Xss-Protection: 1; mode=block < X-Content-Type-Options: nosniff < ETag: "95e888938c0d539b8dd74139beace67f" < Content-Disposition: attachment; filename="e7cce850ae728b81fe3f315d21a560af.zip" < Content-Transfer-Encoding: binary < Content-Length: 125727431 < Content-Type: application/zip < Cache-Control: public < X-Request-Id: 7ce6edb0-013a-4003-a331-94d2b8fae8ad < X-Runtime: 1.244251 < X-Cache: MISS from AAA.fritz.box < Via: 1.1 vegur, 1.1 AAA.fritz.box (squid/3.3.11) < Connection: keep-alive In the logs squid is reporting a TCP_MISS. This is the relevant excerpt from my squid file: # Squid normally listens to port 3128 http_port 3128 http_port 3129 intercept # Uncomment and adjust the following to add a disk cache directory. maximum_object_size 1000 MB maximum_object_size_in_memory 1000 MB cache_dir ufs /usr/local/var/cache/squid 10000 16 256 cache_mem 2000 MB # Leave coredumps in the first cache dir coredump_dir /usr/local/var/cache/squid cache_store_log daemon:/usr/local/var/logs/cache_store.log #refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern -i .(zip) 525600 100% 525600 override-expire ignore-no-cache ignore-no-store refresh_pattern . 0 20% 4320 ## DNS Configuration dns_nameservers 8.8.8.8 8.8.4.4 After trying around for some time I realized that squid is sometimes deciding that my file is cacheable, sometimes not, depending on whether and when I enable/disable the dns_nameservers directive. What could be wrong here?

    Read the article

  • Debian dependency problems / partially installed

    - by Michael
    I tried to install curl support for php 5 on my debian squeeze machine and since I'm having problems. After trying to install curl I got dependency issues which I tried to solve by removing what started the issues. From one thing came another and I'm currently looking at ~29 issues when I try to do an apt-get upgrade. These issues vary from unable to config, dependency and unable to remove errors. I tried apt-get upgrade -f and installing packages using dpkg command. I tried removing using purge and force. I manually removed stuff to try and fix it. I tried running dpkg --configure -a. I've to say I'm still pretty new to linux so I'm out of idea's and cant seem to find an answer online that matches my problems. Here's a part of the apt-get upgrade command output: Reading package lists... Building dependency tree... Reading state information... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 29 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Setting up libgeoip1 (1.4.7~beta6+dfsg-1) ... Bus error dpkg: error processing libgeoip1 (--configure): subprocess installed post-installation script returned error exit status 135 Setting up libisc62 (1:9.7.3.dfsg-1~squeeze3) ... Bus error dpkg: error processing libisc62 (--configure): subprocess installed post-installation script returned error exit status 135 dpkg: dependency problems prevent configuration of libdns69: libdns69 depends on libgeoip1 (>= 1.4.7~beta6+dfsg); however: Package libgeoip1 is not configured yet. libdns69 depends on libisc62; however: Package libisc62 is not configured yet. dpkg: error processing libdns69 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libisccc60: libisccc60 depends on libisc62; however: Package libisc62 is not configured yet. dpkg: error processing libisccc60 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libisccfg62: libisccfg62 depends on libdns69; however: Package libdns69 is not configured yet. .. continues Errors were encountered while processing: libgeoip1 libisc62 libdns69 libisccc60 libisccfg62 libbind9-60 liblwres60 bind9-host libavahi-core7 libdaemon0 avahi-daemon libexif12 libffi5 libgomp1 libgphoto2-port0 libgphoto2-2 libperl5.10 libsensors4 libsnmp15 libhpmud0 libieee1284-3 libnss-mdns libossp-uuid16 libpq5 libv4l-0 libsane libsane-hpaio libssh2-1 python-gobject dpkg --configure -a Setting up libpq5 (8.4.8-0squeeze2) ... Bus error dpkg: error processing libpq5 (--configure): subprocess installed post-installation script returned error exit status 135 Setting up libperl5.10 (5.10.1-17squeeze2) ... Bus error dpkg: error processing libperl5.10 (--configure): subprocess installed post-installation script returned error exit status 135 Setting up libffi5 (3.0.9-3) ... Bus error dpkg: error processing libffi5 (--configure): subprocess installed post-installation script returned error exit status 135 Setting up libexif12 (0.6.19-1) ... .. continues Suggestions are really welcome I really don't know what to do. Michael.

    Read the article

  • RedHat 5.5 server does not show per processor memory utilization

    - by Mike S
    I have been searching all over internet but not finding any leads. I have a system with a memory leak that I am trying to troubleshoot. Unfortunately I am not able to see per processor memory utilization. Here are the outputs of TOP and PS commands. Linux SERVER_NAME 2.6.18-194.8.1.el5 #1 SMP Wed Jun 23 10:52:51 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux top - 09:17:13 up 18:43, 3 users, load average: 0.00, 0.00, 0.00 Tasks: 375 total, 1 running, 373 sleeping, 0 stopped, 1 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 32922828k total, 32776712k used, 146116k free, 267128k buffers Swap: 5245212k total, 0k used, 5245212k free, 32141044k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1 root 15 0 10348 744 620 S 0.0 0.0 0:05.65 init 2 root RT -5 0 0 0 S 0.0 0.0 0:00.05 migration/0 3 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/0 4 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/0 5 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/1 6 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/1 7 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/1 8 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/2 9 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/2 10 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/2 11 root RT -5 0 0 0 S 0.0 0.0 0:00.01 migration/3 12 root 34 19 0 0 0 S 0.0 0.0 0:00.01 ksoftirqd/3 13 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/3 14 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/4 15 root 34 19 0 0 0 S 0.0 0.0 0:00.01 ksoftirqd/4 16 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/4 17 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/5 18 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/5 19 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/5 20 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/6 % ps -auxf | sort -nr -k 4 | head -10 Warning: bad syntax, perhaps a bogus '-'? See /usr/share/doc/procps-3.2.7/FAQ xfs 6205 0.0 0.0 23316 3892 ? Ss Aug19 0:00 xfs -droppriv -daemon uuidd 6101 0.0 0.0 60976 224 ? Ss Aug19 0:00 /usr/sbin/uuidd USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND smmsp 6130 0.0 0.0 57900 1784 ? Ss Aug19 0:00 sendmail: Queue runner@01:00:00 for /var/spool/clientmqueue rpc 5126 0.0 0.0 8052 632 ? Ss Aug19 0:00 portmap root 99 0.0 0.0 0 0 ? S< Aug19 0:00 [events/1] root 98 0.0 0.0 0 0 ? S< Aug19 0:00 [events/0] root 97 0.0 0.0 0 0 ? S< Aug19 0:00 [watchdog/31] root 96 0.0 0.0 0 0 ? SN Aug19 0:00 [ksoftirqd/31] root 95 0.0 0.0 0 0 ? S< Aug19 0:00 [migration/31] Any help with this is appretiate.

    Read the article

  • Solaris 11.1 changes building of code past the point of __NORETURN

    - by alanc
    While Solaris 11.1 was under development, we started seeing some errors in the builds of the upstream X.Org git master sources, such as: "Display.c", line 65: Function has no return statement : x_io_error_handler "hostx.c", line 341: Function has no return statement : x_io_error_handler from functions that were defined to match a specific callback definition that declared them as returning an int if they did return, but these were calling exit() instead of returning so hadn't listed a return value. These had been generating warnings for years which we'd been ignoring, but X.Org has made enough progress in cleaning up code for compiler warnings and static analysis issues lately, that the community turned up the default error levels, including the gcc flag -Werror=return-type and the equivalent Solaris Studio cc flags -v -errwarn=E_FUNC_HAS_NO_RETURN_STMT, so now these became errors that stopped the build. Yet on Solaris, gcc built this code fine, while Studio errored out. Investigation showed this was due to the Solaris headers, which during Solaris 10 development added a number of annotations to the headers when gcc was being used for the amd64 kernel bringup before the Studio amd64 port was ready. Since Studio did not support the inline form of these annotations at the time, but instead used #pragma for them, the definitions were only present for gcc. To resolve this, I fixed both sides of the problem, so that it would work for building new X.Org sources on older Solaris releases or with older Studio compilers, as well as fixing the general problem before it broke more software building on Solaris. To the X.Org sources, I added the traditional Studio #pragma does_not_return to recognize that functions like exit() don't ever return, in patches such as this Xserver patch. Adding a dummy return statement was ruled out as that introduced unreachable code errors from compilers and analyzers that correctly realized you couldn't reach that code after a return statement. And on the Solaris 11.1 side, I updated the annotation definitions in <sys/ccompile.h> to enable for Studio 12.0 and later compilers the annotations already existing in a number of system headers for functions like exit() and abort(). If you look in that file you'll see the annotations we currently use, though the forms there haven't gone through review to become a Committed interface, so may change in the future. Actually getting this integrated into Solaris though took a bit more work than just editing one header file. Our ELF binary build comparison tool, wsdiff, actually showed a large number of differences in the resulting binaries due to the compiler using this information for branch prediction, code path analysis, and other possible optimizations, so after comparing enough of the disassembly output to be comfortable with the changes, we also made sure to get this in early enough in the release cycle so that it would get plenty of test exposure before the release. It also required updating quite a bit of code to avoid introducing new lint or compiler warnings or errors, and people building applications on top of Solaris 11.1 and later may need to make similar changes if they want to keep their build logs similarly clean. Previously, if you had a function that was declared with a non-void return type, lint and cc would warn if you didn't return a value, even if you called a function like exit() or panic() that ended execution. For instance: #include <stdlib.h> int callback(int status) { if (status == 0) return status; exit(status); } would previously require a never executed return 0; after the exit() to avoid lint warning "function falls off bottom without returning value". Now the compiler & lint will both issue "statement not reached" warnings for a return 0; after the final exit(), allowing (or in some cases, requiring) it to be removed. However, if there is no return statement anywhere in the function, lint will warn that you've declared a function returning a value that never does so, suggesting you can declare it as void. Unfortunately, if your function signature is required to match a certain form, such as in a callback, you not be able to do so, and will need to add a /* LINTED */ to the end of the function. If you need your code to build on both a newer and an older release, then you will either need to #ifdef these unreachable statements, or, to keep your sources common across releases, add to your sources the corresponding #pragma recognized by both current and older compiler versions, such as: #pragma does_not_return(exit) #pragma does_not_return(panic) Hopefully this little extra work is paid for by the compilers & code analyzers being able to better understand your code paths, giving you better optimizations and more accurate errors & warning messages.

    Read the article

  • ensime scala errors (class scala.Array not found, object scala not found)

    - by Jeff Bowman
    I've installed ensime according to the README.md file, however, I get errors in the inferior-ensime-server buffer with the following: INFO: Fatal Error: scala.tools.nsc.MissingRequirementError: object scala not found. scala.tools.nsc.MissingRequirementError: object scala not found. at scala.tools.nsc.symtab.Definitions$definitions$.getModuleOrClass(Definitions.scala:516) at scala.tools.nsc.symtab.Definitions$definitions$.ScalaPackage(Definitions.scala:43) at scala.tools.nsc.symtab.Definitions$definitions$.ScalaPackageClass(Definitions.scala:44) at scala.tools.nsc.symtab.Definitions$definitions$.UnitClass(Definitions.scala:89) at scala.tools.nsc.symtab.Definitions$definitions$.init(Definitions.scala:786) at scala.tools.nsc.Global$Run.(Global.scala:593) at scala.tools.nsc.interactive.Global$TyperRun.(Global.scala:473) at scala.tools.nsc.interactive.Global.newTyperRun(Global.scala:535) at scala.tools.nsc.interactive.Global.reloadSources(Global.scala:289) at scala.tools.nsc.interactive.Global$$anonfun$reload$1.apply(Global.scala:300) at scala.tools.nsc.interactive.Global$$anonfun$reload$1.apply(Global.scala:300) at scala.tools.nsc.interactive.Global.respond(Global.scala:276) at scala.tools.nsc.interactive.Global.reload(Global.scala:300) at scala.tools.nsc.interactive.CompilerControl$$anon$1.apply$mcV$sp(CompilerControl.scala:81) at scala.tools.nsc.interactive.Global.pollForWork(Global.scala:132) at scala.tools.nsc.interactive.Global$$anon$2.run(Global.scala:192) also: INFO: Fatal Error: scala.tools.nsc.MissingRequirementError: class scala.Array not found. scala.tools.nsc.MissingRequirementError: class scala.Array not found. at scala.tools.nsc.symtab.Definitions$definitions$.getModuleOrClass(Definitions.scala:516) at scala.tools.nsc.symtab.Definitions$definitions$.getClass(Definitions.scala:474) at scala.tools.nsc.symtab.Definitions$definitions$.ArrayClass(Definitions.scala:217) at scala.tools.nsc.backend.icode.TypeKinds$REFERENCE.(TypeKinds.scala:258) at scala.tools.nsc.backend.icode.GenICode$ICodePhase.(GenICode.scala:55) at scala.tools.nsc.backend.icode.GenICode.newPhase(GenICode.scala:43) at scala.tools.nsc.backend.icode.GenICode.newPhase(GenICode.scala:25) at scala.tools.nsc.Global$Run$$anonfun$4.apply(Global.scala:606) at scala.tools.nsc.Global$Run$$anonfun$4.apply(Global.scala:605) at scala.collection.LinearSeqOptimized$class.foreach(LinearSeqOptimized.scala:62) at scala.collection.immutable.List.foreach(List.scala:46) at scala.tools.nsc.Global$Run.(Global.scala:605) at scala.tools.nsc.interactive.Global$TyperRun.(Global.scala:473) at scala.tools.nsc.interactive.Global.newTyperRun(Global.scala:535) at scala.tools.nsc.interactive.Global.reloadSources(Global.scala:289) at scala.tools.nsc.interactive.Global.typedTreeAt(Global.scala:309) at scala.tools.nsc.interactive.Global$$anonfun$getTypedTreeAt$1.apply(Global.scala:326) at scala.tools.nsc.interactive.Global$$anonfun$getTypedTreeAt$1.apply(Global.scala:326) at scala.tools.nsc.interactive.Global.respond(Global.scala:276) at scala.tools.nsc.interactive.Global.getTypedTreeAt(Global.scala:326) at scala.tools.nsc.interactive.CompilerControl$$anon$2.apply$mcV$sp(CompilerControl.scala:89) at scala.tools.nsc.interactive.Global.pollForWork(Global.scala:132) at scala.tools.nsc.interactive.Global$$anon$2.run(Global.scala:192) Also none of the type identification works for me, I get 'NA' if I get anything at all. C-c t causes emacs to lock up. I'm running: Ubuntu 10.04 (64bit version) emacs 23.1.50.1 ensime from git (as of 3 May 2010) scala is version 2.8.0.RC1 java is 1.6.0_20 (from sun) here is a copy of the log: http://dl.dropbox.com/u/5309017/ensime.log Thanks! Jeff

    Read the article

  • List of freely available programming books

    - by Karan Bhangui
    I'm trying to amass a list of programming books with opensource licenses, like Creative Commons, GPL, etc. The books can be about a particular programming language or about computers in general. Hoping you guys could help: Languages BASH Advanced Bash-Scripting Guide (An in-depth exploration of the art of shell scripting) C The C book C++ Thinking in C++ C++ Annotations How to Think Like a Computer Scientist C# .NET Book Zero: What the C or C++ Programmer Needs to Know About C# and the .NET Framework Illustrated C# 2008 (Dead Link) Data Structures and Algorithms with Object-Oriented Design Patterns in C# Threading in C# Common Lisp Practical Common Lisp On Lisp Java Thinking in Java How to Think Like a Computer Scientist Java Thin-Client Programming JavaScript Eloquent JavaScript Haskell Real world Haskell Learn You a Haskell for Great Good! Objective-C The Objective-C Programming Language Perl Extreme Perl (license not specified - home page is saying "freely available") The Mason Book (Open Publication License) Practical mod_perl (CreativeCommons Attribution Share-Alike License) Higher-Order Perl Learning Perl the Hard Way PHP Practical PHP Programming Zend Framework: Survive the Deep End PowerShell Mastering PowerShell Prolog Building Expert Systems in Prolog Adventure in Prolog Prolog Programming A First Course Logic, Programming and Prolog (2ed) Introduction to Prolog for Mathematicians Learn Prolog Now! Natural Language Processing Techniques in Prolog Python Dive Into Python Dive Into Python 3 How to Think Like a Computer Scientist A Byte of Python Python for Fun Invent Your Own Computer Games With Python Ruby Why's (Poignant) Guide to Ruby Programming Ruby - The Pragmatic Programmer's Guide Mr. Neighborly's Humble Little Ruby Book SQL Practical PostgreSQL x86 assembly Paul Carter's tutorial Lua Programming In Lua (for v5 but still largely relevant) Algorithms and Data Structures Algorithms Data Structures and Algorithms with Object-Oriented Design Patterns in Java Planning Algorithms Frameworks/Projects The Django Book The Pylons Book Introduction to Design Patterns in C++ with Qt 4 (Open Publication License) Version control The SVN Book Mercurial: The Definitive Guide Pro Git UNIX / Linux The Art of Unix Programming Linux Device Drivers, Third Edition Others Structure and Interpretation of Computer Programs The Little Book of Semaphores Mathematical Logic - an Introduction An Introduction to the Theory of Computation Developers Developers Developers Developers Linkers and loaders Beej's Guide to Network Programming Maven: The Definitive Guide I will expand on this list as I get comments or when I think of more :D Related: Programming texts and reference material for my Kindle What are some good free programming books? Can anyone recommend a free software engineering book? Edit: Oh I didn't notice the community wiki feature. Feel free to edit your suggestions right in!

    Read the article

  • jQueryMobile: how to work with slider events?

    - by balexandre
    I'm testing the slider events in jQueryMobile and I must been missing something. page code is: <div data-role="fieldcontain"> <label for="slider">Input slider:</label> <input type="range" name="slider" id="slider" value="0" min="0" max="100" /> </div> and if I do: $("#slider").data("events"); I get blur, focus, keyup, remove What I want to do is to get the value once user release the slider handle and having a hook to the keyup event as $("#slider").bind("keyup", function() { alert('here'); } ); does absolutely nothing :( I must say that I wrongly assumed that jQueryMobile used jQueryUI controls as it was my first thought, but now working deep in the events I can see this is not the case, only in terms of CSS Design. What can I do? jQuery Mobile Slider source code can be found on Git if it helps anyone as well a test page can be found at JSBin As I understand, the #slider is the textbox with the value, so I would need to hook into the slider handle as the generated code for this slider is: <div data-role="fieldcontain" class="ui-field-contain ui-body ui-br"> <label for="slider" class="ui-input-text ui-slider" id="slider-label">Input slider:</label> <input data-type="range" max="100" min="0" value="0" id="slider" name="slider" class="ui-input-text ui-body-null ui-corner-all ui-shadow-inset ui-body-c ui-slider-input" /> <div role="application" class="ui-slider ui-btn-down-c ui-btn-corner-all"> <a class="ui-slider-handle ui-btn ui-btn-corner-all ui-shadow ui-btn-up-c" href="#" data-theme="c" role="slider" aria-valuemin="0" aria-valuemax="100" aria-valuenow="54" aria-valuetext="54" title="54" aria-labelledby="slider-label" style="left: 54%;"> <span class="ui-btn-inner ui-btn-corner-all"> <span class="ui-btn-text"></span> </span> </a> </div> </div> and checking the events in the handler anchor I get only the click event $("#slider").next().find("a").data("events");

    Read the article

< Previous Page | 165 166 167 168 169 170 171 172 173 174 175 176  | Next Page >