Search Results

Search found 6845 results on 274 pages for 'all systems'.

Page 17/274 | < Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >

• NetInstall working on some systems, not working on others

  - by cduruk

  Hi, I'm having an issue where my NetInstall setup works on some computers and fails on others. I am not able to diagnose the issue. I created an image of a Mac Mini and then created a NetRestore image using the System Image Utility found on Snow Leopard Server. NetBoot and NFS all seem to be working fine on the server, which is an XServe. Then I select the NetInstall image from the Startup Disk on a machine. On some of the machines, the process works as expected. On some of them, I see the globe icon blink a few times and then the system boots to the regular hard drive. I have captured the tracedump and the system.log logs from the server on both cases where NetInstall seems to work and fail. Here is the link that has all the logs http://gist.github.com/232232 The gist of the failure seems to be from the lack of BSDP DISCOVER in the failure but I'm not able to identify why that exactly is happening. I'd really appreciate any help on this issue.

  Read the article

• Compatiblity of 64 bit systems

  - by Bill

  I am running Windows Vista home premium 32bit on an Intel core2 duo E7300,which I believe is actually a processor capable of running 64bit.I also run Adobe photoshop CS5 which i believe could utilise the 64 bit processor and more ram.Could I change my operating system to 64bit and would I gain anything from doing so.

  Read the article

• Time Machine (archive) of pre-Leopard systems?

  - by benc

  I want to get off an older Mac OS X system permanently. It is an iBook G3, so that has two important characteristics: Power PC, not Intel based. Runs only Tiger, not Leopard. This means, as far as I can tell: Cannot run Time Machine directly. Here's the approach I have been contemplating: Mount the drive in Firewire mode. Back up the drive as a external drive to the Time Machine volume. Disconnect the drive (permanently). However, I'm concerned that this drive will eventually age out, when the Time Machine volume fills up, and the old-system-as-external-drive is gone. Would it be better to do a single backup with another utility, to shared disk?

  Read the article

• View list of updated packages after apt-upgrade on debian-based linux systems

  - by WebDevHobo

  I just did an update on my Debian system and it was very long. I'd like to know now, after the upgrades have already been applied, which packages were upgraded and which were not.

  Read the article

• Which Version Control Systems support LDAP/AD users and groups

  - by Jason Irwin

  Does anyone know which of the big players (if any) support LDAP/AD users and groups for authentication AND database permissions? Specifically, I'm wondering if SVN, GIT, Mercurial etc. will allow users to login/connect based on AD permissions and also allow granular permissions to be applied to folders within the VC database based on groups within AD. So far my research has not shown this to be possible....

  Read the article

• rhel configure: limit root direct login to systems except through system consoles

  - by zhaojing

  I have to configure to limit root direct access except system consoles. That is, the ways of telnet, ftp, SSH are all prohibited. Root can only login through console. I understand that will require me to configure the file /etc/securetty. I have to comment all the tty, just keep "console" in /etc/securetty. But from google, I found many peoples said that configure /etc/securetty will not limit the way of SSH login. From my experiment, I found it is. (configure /etc/securetty won't limit SSH login). And I add one line in /etc/pam.d/system-auth: auth required pam_securetty It seems root SSH login can be prohibited. But I can't find the reason: What is the difference of configure pam_securetty and /etc/securetty? Can anyone help me with this? Only configure /etc/securetty could work? Or Have I to configure pam_securetty at the same time? Thanks a lot!

  Read the article

• How do you gracefully upgrade mission critical systems to wildly disparate systems?

  - by Ernie

  In the span of the 12+ years of my career, I have yet to overcome this hurdle and I suspect the answer simply isn't easy or even possible, so I ask everyone here for their experience. Say that you're running into egregious problems that can only be fixed by moving from one platform to another - either from making a mistake in choosing the platform that was chosen years ago, or simply growing beyond what the system was originally designed for. You know for certain that the cruft that has built up over time will invariably mean that it will be nearly impossible to test for all the things that will certainly lead to tech support hell - which we all know leads to the loss of customers. Not that customers aren't already complaining about the egregious problems that already exist! The best possible way that I've discovered so far is to maybe devise a plan for the changeover, test it on a few clients, test it on a dozen clients, test it on a hundred clients, then finally finish the changeover for everyone and pray that you've worked out all the bugs with those first hundred and twenty, and that the animal by-products will not hit the ventilation system in the most spectacular fashion possible. However, that doesn't mean that it won't anyway. So say that you're moving from Exchange to Exim (or even just Sendmail to Exim). How do you handle it?

  Read the article

• Non-embedded font with different name across operating systems when printing HTML to PDF

  - by sennett

  I create a document using HTML markup. I want to use Palatino, which is called Palatino on Windows and Palatino Linotype on Mac, so I specify my CSS accordingly: font-family: Palatino Linotype, Palatino, serif;. I then print to a PDF using PrimoPDF under Windows. It all looks good when viewed in Windows. But I want this PDF to look the same on a Mac, and the resulting file size (94KB) would suggest that the font (size 460KB) is not getting embedded by Primo, perhaps because it is a native font. How will this look? Will the PDF file format resolve this, or will the format of my PDF be wang when viewed under OSX? Please note that I do not want to embed the font. I used a web-safe font to avoid this need, and it just so happens that the one I picked does not have the same name in OSX as in Windows.

  Read the article

• Articles of x386 and later CPU based systems

  - by user32569

  Hi there. I know this is hard question, and possibly not to be answered here, but if there is some article, or more you know about, please post a link. About books, its sad but many great computer books cannot be bought in my country. So, you can find many articles online, which says how memory was mapped back in pre x386 CPU. How there was explicit holes ready for MMIO BIOS, Video BIOS, etc. How there was A20 line for allowing higher memory access etc. Problem is, time changed. Today BIOSes are many times larger, and pure x86 16bit mode is used for booting and ROM flashing only. OS ignore BIOS as they access everything using drivers. And I just want to know, how it works today. I know not so specific question, but I read OS dev wiki, many articles, but all refering to days before massive usage of pure 32bit CPUs.

  Read the article

• Disk monitor script with long file systems

  - by DD.

  $ df -H Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_app001-lv_root 34G 12G 21G 35% / tmpfs 8.4G 0 8.4G 0% /dev/shm /dev/sda1 508M 54M 429M 12% /boot /dev/mapper/vg_app001-lv_home 19G 309M 17G 2% /home I want to run a disk monitor script but because the filesystem is so long the row has been split into two lines and the script fails. Any suggestions?

  Read the article

• Office jukebox systems

  - by Jona

  We're looking for a good office jukebox solution where staff can select songs via a web interface to be played over the central set of speakers. Must haves: Web Interface RSS / easy to scrap display of currently playing songs Ability to play mp3s and manage an ordered playlist. Good cataloguing of media. Multiple OSs supported as clients - Windows, Mac, Fedora Linux (will probably be accomplished by virtue of a web interface). We have tried XBMC which worked well as a proof of concept however the web interface is just too immature and has too many bugs for a reliable multi-user solution. I believe the same will be true of boxee. Nice to have: Ability to play music videos onto a monitor Ability to listen to radio streams specifically Shoutcast and the BBC. Ability to run on Linux is a nice to have but windows solutions which worked well would certainly be considered. I am aware of question 61404 and don't believe this to be a duplicate due to the specific requirements.

  Read the article

• Sharing wireless internet connection between 2 Ubuntu 10.04 systems using cross-over cable

  - by Gary

  I have a Lenovo T60 with Ubuntu 10.04 connected with a cross-over cable to a Dell Vostro 1400, also running Ubuntu 10.04. My internet is coming into the Lenovo through an external wireless antennae, and I want to share the internet with the Dell. On the Lenovo: eth0 connection has IPv4 Settings 'Shared to other computers' I can ping the Dell (10.42.43.10) successfully I can use mtr to trace to www.google.com successfully On the Dell: eth0 connection has IPv4 Settings 'Automatic DHCP' I can ping the Lenovo (10.42.43.1) successfully when I use mtr to trace to www.google.com, I can only reach 10.42.43.1 I must be missing some setting, but cannot see what it is; can anyone help me?

  Read the article

• COM+ applications deployment behaves different on different systems

  - by sharptooth

  In order to give my COM+ application enough credentials I want its components to be instantiated under "Local Service" account. When I create a server application with a wizard on Win2k3 it offers to choose under whom to instantiate components - "Local Service" is one of choices. But on WinXP "Local Service" is not offered at all in the wizard. When I open the "Identity" tab of the COM+ application under Win2k3 there'a a handful of choises, "Local Service" included, and I can select any of them. But on WinXP the same "Identity" tab only offers "Interactive user". What does this difference depend on? Does it depend on the system or on something else?

  Read the article

• How do you keep track of installed/used software/systems/services in your organisations server infr

  - by edgars

  I'm interested in any software, experience or guidelines listed that help to deal with listing installed services, their primary user (or business person that is responsible for this service), domain names, ip addresses, ports in your servers. Servers are both Windows and Linux, so licenses are also good to track with all of this information. Scale of the infrastructure in question - 20-50 servers. Currently we have no better idea as to use Excel for it.

  Read the article

• Remote SCCM deployment of Operating Systems

  - by Decad

  I am currently using sccm 2007 for our software deployment and PXE. During this summer I have been tasked with upgrading 2000+ machines from Windows XP to Windows 7. My plan is to use sccm to advertise the Windows 7 task sequence to the machines. However my question is, what is the best way to automate the deployment? Can I make SCCM turn a machine on and make it run an advertised task sequence without having to be in the same room as the machines?

  Read the article

• EXT4 external hard drive for use with multiple systems

  - by EXTdumb

  I recently bought a external hard drive to store some data on. I use Linux but I am not a power user. If I format the drive to EXT4, is it possible for the permissions to ever screw up and I lost access to my data? I will be plugging the drive into several different linux based computers at work and I frequently hop distros on my main home machine. I need to make sure I don't lose any data because I overlooked something. I am not familiar with EXT 3 or 4. So far I have done this : Formatted drive to EXT4 ran gksudo thunar and changed the permissions to my user account and all settings to read/write Wrote all the files I need to the drive I really appreciate any help.

  Read the article

• Dual-boot more than two operating systems

  - by aldorado

  I currently run Windows 7 and Ubuntu 12.04 as a dual-boot system. I need Linux, but Ubuntu freezes at least once a day. So I want to replace it with another distribution like Debian or LMDE. On the other hand I am a little concerned that I'll have troubles working with a less user friendly operating system than Ubuntu. So would it be possible to just scale down the Windows partition and install the next Linux as a third system? Thus, with a "triple-boot system" I could keep Ubuntu until I feel familiar with the new system. Afterwards, I guess, it should be possible to replace the Ubuntu partition by expanding the new system?

  Read the article

• Best Practice for upgrading PHP On Production Systems

  - by Demic

  We Have two load balanced web servers running php 5.3. I've been asked by our dev team to upgrade php to 5.4 because they need certain functionality it will bring. The main issue is that 5.3 is the latest thats been built into the distros repository, so to upgrade using the package manager, Ill need to add another 3rd party repo. I dont have a problem with this per se, but Im concerned about using a package from a "non official" source. The other option is to compile php from source, but I guess this will prevent me from using the package manager to upgrade at any stage in the future? So I guess Im just looking for some guidance on which way to go. Compile from source or install from any old repo that purports to supply php 5.4? Or perhaps theres a third option I havent considered? Thanks in advance Demic

  Read the article

• DataGraph alternatives for Windows systems

  - by ldigas

  Recently, on a friend's mac I came across a wonderful application for plotting in numerous ways numeric data - DataGraph. I've always done this sort of thing with Excel, and with newer versions, to me (this is emphasized "to me", so this doesn't get taken as an Excel rant post), it's becoming troublesome. Are there applications like this (specialized for one thing they do good and relatively simple ... I'm not interested in CFD visualization packages in here.) for Windows ? All suggestions welcomed.

  Read the article

• encrypt multiple systems (win7 + deb)

  - by daftu

  I've installed two operatings system on single drive with 3 partitions (#1 Windows 7, #2 Debian Squeeze, #some data). Grub 2 is installed in MBR and lets me choose which system to boot. I would encrypt the 1st system partition containing Win 7. I tried to do this using TrueCrypt under Windows, but it says that encrypting Windows system with other loader (not windows loader, Grub in my case) is not supported. How can I do that?

  Read the article

• Libraries for developing NCPDP SCRIPT based systems (a standard for e-prescribing)

  - by Kaveh Shahbazian

  What are (based on experiences) best (commercial or open source) libraries for developing NCPDP-based systems? Background: NCPDP (National Council for Prescription Drug Programs) is a not-for-profit, ANSI-accredited, standards development organization. One of it's standards is the SCRIPT Standard for Electronic Prescribing, which allows PHARMACY, PRESCRIBER (i.e. Physician) and PAYERS (patient or more often insurer) communicate. So the SCRIPT standard is about data transmission. Problem: One step in implementing such systems is to develop models for data based on SCRIPT standard. These models should have utilities for serializing/deserializing to/from SCRIPT binary format and SCRIPT XML format (there are two distinct formats here; both must be supported). Here rises the problem (for me at least). To develop this subsystem for handling the model, implementing serializing and deserializing facilities and keep it uptodate with the SCRIPT standard specifications is a lot of work; it needs it's own team and team management issues (to support a standard implementation). So I am looking for a solution to this problem; to keep standard implementation out of the way and focusing on main problems. Thanks to all (Thankyou Freiheit for your hints!) Edit 2: Thanks to all for help! NCPDP (National Council for Prescription Drug Programs) is an standard for e-prescribing. It defines two formats for message transmission: binary and XML. Implementing XML is somehow easier because it is a standard format which in turn gives us more tooling options. The binary format has a very big specification and time-consuming to implement. I did not find an open source solution to work with. So I am looking for commercial alternatives. Edit 1: Please guide me; what's wrong with this question?

  Read the article

• Need some ignition for learning Embedded Systems

  - by Rahul

  I'm very much interested in building applications for Embedded Devices. I'm in my 3rd year Electrical Engineering and I'm passionate about coding, algorithms, Linux OS, etc. And also by Googling I found out that Linux OS is one of the best OSes for Embedded devices(may be/may not be). I want to work for companies which work on mobile applications. I'm a newbie/naive to this domain & my skills include C/C++ & MySQL. I need help to get started in the domain of Embedded Systems; like how/where to start off, Hardware prerequisites, necessary programming skills, also what kind of Embedded Applications etc. I've heard of ARM, firmware, PIC Micorcontrollers; but I don't know anything & just need proper introduction about them. Thanx. P.S: I'm currently reading Bjarne Struotsup's lecture in C++ at Texas A&M University, and one chapter in it describes about Embedded Systems Programming.

  Read the article

• Need some ignition in Embedded Systems

  - by Rahul

  I'm very much interested in building applications for Embedded Devices. I'm in my 3rd year Electrical Engineering and I'm passionate about coding, algorithms, Linux OS, etc. And also by Googling I found out that Linux OS is one of the best OSes for Embedded devices(may be/may not be). I want to work for companies which work on mobile applications. I'm a newbie/naive to this domain & my skills include C/C++ & MySQL. I need help to get started in the domain of Embedded Systems; like how/where to start off, Hardware prerequisites, necessary programming skills, also what kind of Embedded Applications etc. I've heard of ARM, firmware, PIC Micorcontrollers; but I don't know anything & just need proper introduction about them. Thanx. P.S: I'm currently reading Bjarne Struotsup's lecture in C++ at Texas A&M University, and one chapter in it describes about Embedded Systems Programming.

  Read the article

• Completed Event not triggering for web service on some systems

  - by Farukh

  Hi, This is rather weird issue that I am facing with by WCF/Silverlight application. I am using a WCF to get data from a database for my Silverlight application and the completed event is not triggering for method in WCF on some systems. I have checked the called method executes properly has returns the values. I have checked via Fiddler and it clearly shows that response has the returned values as well. However the completed event is not getting triggered. Moreover in few of the systems, everything is fine and I am able to process the returned value in the completed method. Any thoughts or suggestions would be greatly appreciated. I have tried searching around the web but without any luck :( Following is the code.. Calling the method.. void RFCDeploy_Loaded(object sender, RoutedEventArgs e) { btnSelectFile.IsEnabled = true; btnUploadFile.IsEnabled = false; btnSelectFile.Click += new RoutedEventHandler(btnSelectFile_Click); btnUploadFile.Click += new RoutedEventHandler(btnUploadFile_Click); RFCChangeDataGrid.KeyDown += new KeyEventHandler(RFCChangeDataGrid_KeyDown); btnAddRFCManually.Click += new RoutedEventHandler(btnAddRFCManually_Click); ServiceReference1.DataService1Client ws = new BEVDashBoard.ServiceReference1.DataService1Client(); ws.GetRFCChangeCompleted += new EventHandler<BEVDashBoard.ServiceReference1.GetRFCChangeCompletedEventArgs>(ws_GetRFCChangeCompleted); ws.GetRFCChangeAsync(); this.BusyIndicator1.IsBusy = true; } Completed Event.... void ws_GetRFCChangeCompleted(object sender, BEVDashBoard.ServiceReference1.GetRFCChangeCompletedEventArgs e) { PagedCollectionView view = new PagedCollectionView(e.Result); view.GroupDescriptions.Add(new PropertyGroupDescription("RFC")); RFCChangeDataGrid.ItemsSource = view; foreach (CollectionViewGroup group in view.Groups) { RFCChangeDataGrid.CollapseRowGroup(group, true); } this.BusyIndicator1.IsBusy = false; } Please note that this WCF has lots of other method as well and all of them are working fine.... I have problem with only this method... Thanks...

  Read the article

• transferring binary files between systems

  - by tim

  Hi guys I'm trying to transfer my files between 2 UNIX clusters, the data is pure numeric (vectors of double) in binary form. Unfortunately one of the systems is IBM ppc997 and the other is AMD Opteron, It seems the format of binary numbers in these systems are different. I have tried 3 ways till now: 1- Changed my files to ASCII format (i.e. saved a number at each line in a text file), sent them to the destination and changed them again to binary on the target system (they both are UNIX, no end of line character difference??!) 2- Sent pure binaries to the destination 3- used uuencode sent them to the destination and decoded them Unfortunately any of these methods does not work (my code in the destination system generates garbage, while it works on the first system, I'm 100% sure the code itself is portable). I don't know what else I can do? Do you have any idea? I'm not a professional, please don't use computer scientists terminology! And: my codes are in C, so by binary I mean a one to one mapping between memory and hard disk. Thanks

  Read the article

< Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >