Search Results

Search found 29333 results on 1174 pages for 'front end'.

Page 171/1174 | < Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >

• Determining the health of a Cisco switch port?

  - by ewwhite

  I've been chasing a packet-loss and network stability issue for a handful of end-users on an internal network for the past few days... These issues surfaced recently, however, the location was struck by lightning six weeks ago. I was seeing 5-10% packet loss between a stack of four Cisco 2960's and several PC's and phones on the other side of a 77-meter run. The PC's were run inline with the phones over a trunked link. We were seeing dropped calls and interruptions in client-server applications and Microsoft Exchange connectivity. I tried the usual troubleshooting steps remotely, having a local technician do the following during breaks in user and production activity: change cables between the wall jack and device. change patch cables between the patch panel and switch port(s). try different switch ports within the 2960 stack. change end-user devices with known-good equipment (new phones, different PC's). clear switch port interface counters and monitor incrementing errors closely. (Pastebin output of sh int) Pored over the device logs and Observium RRD graphs. No link up/down issues from the switch side. change power strips on the end-user side. test cable runs from the Cisco 2960 using test cable-diagnostics tdr int Gi4/0/9 (clean)* test cable runs with a Tripp-Lite cable tester. (clean) run diagnostics on the switch stack members. (clean) In the end, it took three changes of switch ports to find a stable solution. The only logical conclusion is that a few Cisco 2960 switch ports are bad or flaky... Not dead, but not consistent in behavior either. I'm not used to seeing individual ports die in this manner. What else can I test or check to determine if these devices are bad? Is it common for single ports to have problems, rather than a contiguous bank of ports? BTW - show cable-diagnostics tdr int Gi4/0/14 is very cool... Interface Speed Local pair Pair length Remote pair Pair status --------- ----- ---------- ------------------ ----------- -------------------- Gi4/0/14 1000M Pair A 79 +/- 0 meters Pair B Normal Pair B 75 +/- 0 meters Pair A Normal Pair C 77 +/- 0 meters Pair D Normal Pair D 79 +/- 0 meters Pair C Normal

  Read the article

• Rails 3 Form For Custom Action

  - by Andrew

  I'm having trouble routing a form to a custom action in Rails 3. Here are my routes: resources :photos do resources :comments collection do get 'update_states' end member do put 'upload' end end Here's the form_for: form_for @photo, :remote => true, :url => { :action => upload_photo_path(@photo) }, :html => { :multipart => :true, :method => 'put' } do |f| And here's the error message: No route matches {:action=>"/photos/42/upload", :controller=>"photos"} ... this is especially frustrating because "photos/:id/upload" is exactly the correct action for this form. What am I missing? EDITS - Here are the original Photo-related routes: photo_comments GET /photos/:photo_id/comments(.:format) {:action=>"index", :controller=>"comments"} POST /photos/:photo_id/comments(.:format) {:action=>"create", :controller=>"comments"} new_photo_comment GET /photos/:photo_id/comments/new(.:format) {:action=>"new", :controller=>"comments"} edit_photo_comment GET /photos/:photo_id/comments/:id/edit(.:format) {:action=>"edit", :controller=>"comments"} photo_comment GET /photos/:photo_id/comments/:id(.:format) {:action=>"show", :controller=>"comments"} PUT /photos/:photo_id/comments/:id(.:format) {:action=>"update", :controller=>"comments"} DELETE /photos/:photo_id/comments/:id(.:format) {:action=>"destroy", :controller=>"comments"} update_states_photos GET /photos/update_states(.:format) {:action=>"update_states", :controller=>"photos"} upload_photo PUT /photos/:id/upload(.:format) {:action=>"upload", :controller=>"photos"} photos GET /photos(.:format) {:action=>"index", :controller=>"photos"} POST /photos(.:format) {:action=>"create", :controller=>"photos"} new_photo GET /photos/new(.:format) {:action=>"new", :controller=>"photos"} edit_photo GET /photos/:id/edit(.:format) {:action=>"edit", :controller=>"photos"} photo GET /photos/:id(.:format) {:action=>"show", :controller=>"photos"} PUT /photos/:id(.:format) {:action=>"update", :controller=>"photos"} DELETE /photos/:id(.:format) {:action=>"destroy", :controller=>"photos"} Here are the relevant routes when I changed the route to match 'upload': photo_comments GET /photos/:photo_id/comments(.:format) {:action=>"index", :controller=>"comments"} POST /photos/:photo_id/comments(.:format) {:action=>"create", :controller=>"comments"} } new_photo_comment GET /photos/:photo_id/comments/new(.:format) {:action=>"new", :controller=>"comments"} edit_photo_comment GET /photos/:photo_id/comments/:id/edit(.:format) {:action=>"edit", :controller=>"comments"} photo_comment GET /photos/:photo_id/comments/:id(.:format) {:action=>"show", :controller=>"comments"} PUT /photos/:photo_id/comments/:id(.:format) {:action=>"update", :controller=>"comments"} DELETE /photos/:photo_id/comments/:id(.:format) {:action=>"destroy", :controller=>"comments"} update_states_photos GET /photos/update_states(.:format) {:action=>"update_states", :controller=>"photos"} upload_photo /photos/:id/upload(.:format) {:action=>"upload", :controller=>"photos"} photos GET /photos(.:format) {:action=>"index", :controller=>"photos"} POST /photos(.:format) {:action=>"create", :controller=>"photos"} new_photo GET /photos/new(.:format) {:action=>"new", :controller=>"photos"} edit_photo GET /photos/:id/edit(.:format) {:action=>"edit", :controller=>"photos"} photo GET /photos/:id(.:format) {:action=>"show", :controller=>"photos"} PUT /photos/:id(.:format) {:action=>"update", :controller=>"photos"} DELETE /photos/:id(.:format) {:action=>"destroy", :controller=>"photos"} Unfortunately 'match' didn't work any better... -- EDIT -- Just to confirm another scenario here... with this in the routes: resources :photos do resources :comments collection do get 'update_states' end member do match 'upload' end end and this in the view: form_for @photo, :remote => true, :url => { :action => 'upload' }, :html => { :multipart => :true, :id => 'photo_upload' } do |f| I still get: No route matches {:action=>"upload", :controller=>"photos"}

  Read the article

• Assign table values to multiple variables using a single SELECT statement and CASE?

  - by Darth Continent

  I'm trying to assign values contained in a lookup table to multiple variables by using a single SELECT having multiple CASE statements. The table is a lookup table with two columns like so: [GreekAlphabetastic] SystemID Descriptor -------- ---------- 1 Alpha 2 Beta 3 Epsilon This is my syntax: SELECT @VariableTheFirst = CASE WHEN myField = 'Alpha' THEN tbl.SystemID END, @VariableTheSecond = CASE WHEN myField = 'Beta' THEN tbl.SystemID END, @VariableTheThird = CASE WHEN myField = 'Epsilon' THEN tbl.SystemID END FROM GreekAlphabetastic tbl However, when I check the variables after this statement executes, I expected each to be assigned the appropriate value, but instead only the last has a value assigned. SELECT @VariableTheFirst AS First, @VariableTheSecond AS Second, @VariableTheThird AS Third Results: First Second Third NULL NULL 3 What am I doing wrong?

  Read the article

• TypeError: can't convert String into Integer

  - by demas

  I have code: class Scene def initialize(number) @number = number end attr_reader :number end scenes = [Scene.new("one"), Scene.new("one"), Scene.new("two"), Scene.new("one")] groups = scenes.inject({}) do |new_hash, scene| new_hash[scene.number] = [] if new_hash[scene.number].nil? new_hash[scene.number] << scene end When I'm lauching it I get error: freq.rb:11:in `[]': can't convert String into Integer (TypeError) from freq.rb:11:in `block in <main>' from freq.rb:10:in `each' from freq.rb:10:in `inject' from freq.rb:10:in `<main>' If I change scenes to: scenes = [Scene.new(1), Scene.new(1), Scene.new(2), Scene.new(1)] the problem dissapear. Why I get error message in the first case? Why Ruby decide to convert scene.number from String to Integer? And one additional question about the 'inject' method. When Ruby initialize the 'new_hash' variable and how can Ruby know the type of this variable?

  Read the article

• Weird Excel Formatting

  - by Gage

  Recently a new co-op was hired at our company and has been tasked to run a report. The report queries the database and returns a resultset and from there procedes to create the spreadsheets. Depending on the number of days selected a different number of reports are generated but I do not believe that is relavent to the question. Basically it runs the reports and loops through the resultset but at some point continues to loop through until tow 65536 at which it stops. For Example if the resultset contained 74 records then the first 74 rows would appear normally (formatted yellow) while everything after that would also be formatted yellow although it should be left alone. I am inheriting this code as I to am a new co-op. Apparently this only happens when a "change of guards" happens (New co-op has to run the report).` DoCmd.SetWarnings False DoCmd.OpenQuery ("DailySummaryQueryMain") strSQL = "SELECT * FROM DailySummaryMain" Set rs = CurrentDb.OpenRecordset(strSQL) DoCmd.Echo True, "Running first Report" If Not rs.EOF Then rs.MoveFirst Do While Not rs.EOF And Not rs.BOF xlapp.Range("A" & i).Value = rs.Fields(0).Value xlapp.Range("B" & i).Value = rs.Fields(1).Value xlapp.Range("C" & i).Value = rs.Fields(2).Value Set rs2 = CurrentDb.OpenRecordset("SELECT dbo_StatusType.StatusTypeID, dbo_StatusType.Name FROM dbo_StatusType WHERE (((dbo_StatusType.StatusTypeID)=" & rs.Fields(3) & "))") rs2.MoveFirst xlapp.Range("D" & i).Value = rs2.Fields(1).Value xlapp.Range("E" & i).Value = rs.Fields(4).Value xlapp.Range("F" & i).Value = rs.Fields(5).Value xlapp.Range("G" & i).Value = rs.Fields(6).Value 'count number of outages that start and end on same day If Format(xlapp.Range("F" & i).Value, "mm/dd/yyyy") = Format(xlapp.Range("G" & i).Value, "mm/dd/yyyy") Then dayCount = dayCount + 1 End If xlapp.Range("H" & i).Value = rs.Fields(7).Value xlapp.Range("I" & i).Value = rs.Fields(8).Value xlapp.Range("J" & i).Value = rs.Fields(9).Value xlapp.Range("K" & i).Value = rs.Fields(10).Value xlapp.Range("L" & i).Value = rs.Fields(11).Value xlapp.Range("M" & i).Value = rs.Fields(12).Value xlapp.Range("N" & i).Value = rs.Fields(13).Value 'highlite recently modified rows If rs.Fields(14).Value = "Yes" Then xlapp.Range("A" & i & ":N" & i).Select With xlapp.Selection.Interior .ColorIndex = 36 .Pattern = xlSolid End With End If 'break apart by sector If CInt(rs.Fields(2).Value) = 1 Then row = row1 ElseIf CInt(rs.Fields(2).Value) = 2 Then row = row2 ElseIf CInt(rs.Fields(2).Value) = 3 Then row = row3 Else row = row4 End If xlapp.Worksheets(CInt(rs.Fields(2).Value) + 1).Activate xlapp.Range("A" & row).Value = rs.Fields(0).Value xlapp.Range("B" & row).Value = rs.Fields(1).Value xlapp.Range("C" & row).Value = rs.Fields(13).Value xlapp.Range("D" & row).Value = rs.Fields(4).Value xlapp.Range("E" & row).Value = rs.Fields(5).Value xlapp.Range("F" & row).Value = rs.Fields(6).Value xlapp.Range("G" & row).Value = rs.Fields(7).Value xlapp.Range("H" & row).Value = rs.Fields(8).Value xlapp.Range("I" & row).Value = rs.Fields(9).Value xlapp.Range("J" & row).Value = rs.Fields(10).Value xlapp.Range("K" & row).Value = "" xlapp.Range("L" & row).Value = rs.Fields(11).Value xlapp.Range("M" & row).Value = rs.Fields(13).Value If CInt(rs.Fields(2).Value) = 1 Then row1 = row1 + 1 ElseIf CInt(rs.Fields(2).Value) = 2 Then row2 = row2 + 1 ElseIf CInt(rs.Fields(2).Value) = 3 Then row3 = row3 + 1 Else row4 = row4 + 1 End If 'activate main summary sheet for next outage xlapp.Worksheets(1).Activate i = i + 1 rs.MoveNext Loop` Also I should note that this is all happening within an access database which has its tables linked from SQL. The query is extremely slow to run from which I believe is the use of views but thats neither here nor there. All you have to know is attempting to debug takes an enormous amount of time due to having to wait for the recordset to return. My guess is that its not checking to see if the resultset is empty correctly. Is there a way I could check to see if theres a value is rs.Fields(0) and base it off that maybe? That is the ID column and there should always be a value. I am wondering why rs.EOF isn't catching this though.

  Read the article

• Can I check the validity of a single DataMapper property?

  - by Nathan Long

  In a custom DataMapper setter, I'd like to check whether the value I'm setting is valid or not. For instance: class ToastMitten include DataMapper::Resource property :id, Serial property :wearer, Enum['Chuck Norris', 'Jon Skeet'] property :first_worn_at, DateTime def wearer=(name) super if wearer.valid? # How can I do this? first_worn_at = Time.now end end end t = ToastMitten.new t.wearer = 'Nathan Long' # invalid value; do NOT set first_worn_at t.wearer = 'Jon Skeet' # valid value; set first_worn_at Can I check the validity of a single property like this without calling valid? on the object itself and looking through all the errors?

  Read the article

• Syntax Error with MySql Workbench and IF Statement

  - by Hugo S.

  Hey guys, Im migrating from T-SQL to MySql syntax and don't know how to get over this syntax error given by Workbench 5.1.18: -- -------------------------------------------------------------------------------- -- Routine DDL -- -------------------------------------------------------------------------------- DELIMITER // CREATE PROCEDURE `SysTicket`.`GetProductionLines` (aId INT, aActive INT, aResponsible VARCHAR(8000)) BEGIN IF(aId > 0) THEN SELECT * FROM ProductionLine WHERE Id = @Id; ELSE IF( aActive <> -1 AND aResponsible = '|$EMPTYARG$|') THEN SELECT * FROM ProductionLine; ELSE IF(aResponsible = '|$EMPTYARG&|') THEN SELECT * FROM ProductionLine WHERE Active = aActive; ELSE SELECT * FROM ProductionLine WHERE Active = aActive AND Responsible LIKE CONCAT('%', aResponsible, '%'); END IF; END// It says Syntax error near END (last line) ty in advance.

  Read the article

• will_paginate undefined method error - Ruby on Rails

  - by bgadoci

  I just installed the gem for will_paginate and it says that it was installed successfully. I followed all the instructions listed with the plugin and I am getting an 'undefined method `paginate' for' error. Can't find much in the way of Google search and haven't been able to fix it myself (obviously). Here is the code: PostsController def index @tag_counts = Tag.count(:group => :tag_name, :order => 'updated_at DESC', :limit => 10) @posts = Post.paginate :page => params[:page], :per_page => 50 respond_to do |format| format.html # index.html.erb format.xml { render :xml => @posts } format.json { render :json => @posts } format.atom end end /model/post.rb class Post < ActiveRecord::Base validates_presence_of :body, :title has_many :comments, :dependent => :destroy has_many :tags, :dependent => :destroy cattr_reader :per_page @@per_page = 10 end /posts/views/index.html.erb <%= will_paginate @posts %>

  Read the article

• Retrieve Gmail using Ruby

  - by Kartik Rao

  I need to retrieve emails from my Gmail account using Ruby on Rails. I'm currently using this piece of code, but it gives me a timeout error everytime. require 'net/pop' pop = Net::POP3.new 'mail.isp.com' pop.start '[email protected]', 'password' if pop.mails.empty? puts "No mail." else puts "You have #{pop.mails.length} new messages." puts "Downloading..." pop.mails.each_with_index do|m,i| File.open( "inbox/#{i}", 'w+' ) do|f| f.write m.pop end m.delete end end This is the error I recieve /usr/lib/ruby/1.8/timeout.rb:60:in `new': execution expired (Timeout::Error) from /usr/lib/ruby/1.8/net/protocol.rb:206:in `old_open' from /usr/lib/ruby/1.8/net/protocol.rb:206:in `old_open' from /usr/lib/ruby/1.8/net/pop.rb:438:in `do_start' from /usr/lib/ruby/1.8/net/pop.rb:432:in `start' from script/mail.rb:4 Any help will be appreciated!

  Read the article

• Conditional OrderBy

  - by jeriley

  So, right now I've got a number of columns the user can sort by (Name, County, Active) and that's easy but messy. Looks something like this... Select Case e.SortExpression Case "Name" If (isDescending) Then resultsList.OrderByDescending(Function(a) a.Name).ToList() Else resultsList.OrderBy(Function(a) a.Name).ToList() End If Case "County" ... and so on what I would LIKE to do, is something more ... graceful, like this Private Function SortThatList(ByVal listOfStuff As List(Of Stuff), ByVal isDescending As Boolean, ByVal expression As Func(Of Stuff)) As List(Of Stuff) If (isDescending) Then Return listOfStuff.OrderByDescending(expression) Else : Return listOfStuff.OrderBy(expression) End If End Function but it doesn't like the datatype (Of TKey) ... I've tired Func(Of stuff, boolean) (got something in c# that works nicely like that) but can't seem to get this one to do what I want. Ideas? What's the magic syntax?

  Read the article

• CrossPost access to data

  - by Craig

  Hi, I have a search form on a page that posts back to itself and shows the results, all works fine. I now have a requirement to put the same search form on the site home page. This needs to post back to the search form and run the findResults code. Using the PostBackURL parameter on the home page form's submit button I can hit the search page ok. However, when using the following code in the Page_Load section of the search page I hit the problem of not being able to access data from the posting page as I get the following error message on the line starting "yearList.SelectedValue....": "'Site._default1.Protected WithEvents yearList As System.Web.UI.WebControls.DropDownList' is not accessible in this context because it is 'Protected'". '################################# '# Handle form post from Home page '################################# Dim crossPostBackPage As Site._default1 If Not (Page.PreviousPage Is Nothing) Then If Not (Page.IsCrossPagePostBack) Then If (Page.PreviousPage.IsValid) Then crossPostBackPage = CType(PreviousPage, Site._default1) yearList.SelectedValue = crossPostBackPage.yearList.SelectedValue getAvailability() End If End If End If As I didn't declare yearList Protected, I don't know where to change it or how to. Any advice would be appreciated, Craig

  Read the article

• Python: Implementing slicing in __getitem__

  - by nicotine

  I am trying to implement slice functionality for a class I am making that creates a vector representation. I have this code so far, which I believe will properly implement the slice but whenever I do a call like v[4] where v is a vector python returns an error about not having enough parameters. So I am trying to figure out how to define the getitem class to handle both plain indexes and slicing. def __getitem__(self, start, stop, step): indx = start if stop == None: end = start + 1 else: end = stop if step == None: stride = 1 else: stride = step return self.__data[indx:end:stride]

  Read the article

• Can't store array in json field in postgresql (rails) can't cast Array to json

  - by Drew H

  This is the error I'm getting when I run db:migrate rake aborted! can't cast Array to json This is my table class CreateTrips < ActiveRecord::Migration def change create_table :trips do |t| t.json :flights t.timestamps end end end This is in my seeds.rb file flights = [{ depart_time_hour: 600, arrive_time_hour: 700, passengers: [ { user_id: 1, request: true } ] }] trip = Trip.create( { name: 'Flight', flights: flights.to_json } ) For some reason I can't do this. If I do this. trip = Trip.create( { name: 'Flight', flights: { flights: flights.to_json } } ) It works. I don't want this though because now I have to access the json array with trip.flights.flights. Not the behavior I'm wanting.

  Read the article

• 'rename' on files with apostrophes

  - by nomen

  I'm trying to batch rename some files using the 'rename' utility. Unfortunately, the file names contain apostrophes, and it's messing things up. I'm not sure how to proceed. Here's what I've tried: rename -n '/.*(\d\d).jpg/Foo's Excellent Photo - $1.jpg/' # fails due to end of string rename -n '/.*(\d\d).jpg/Foo\'s Excellent Photo - $1.jpg/' # fails due to end of string rename -n "/.*(\d\d).jpg/Foo's Excellent Photo - $1.jpg/" # fails due to shell expansion Can anybody help?

  Read the article

• Dynamic SQL to generate column names?

  - by Ben McCormack

  I have a query where I'm trying pivot row values into column names and currently I'm using SUM(Case...) As 'ColumnName' statements, like so: SELECT SKU1, SUM(Case When Sku2=157 Then Quantity Else 0 End) As '157', SUM(Case When Sku2=158 Then Quantity Else 0 End) As '158', SUM(Case When Sku2=167 Then Quantity Else 0 End) As '167' FROM OrderDetailDeliveryReview Group By OrderShipToID, DeliveryDate, SKU1 The above query works great and gives me exactly what I need. However, I'm writing out the SUM(Case... statements by hand based on the results of the following query: Select Distinct Sku2 From OrderDetailDeliveryReview Is there a way, using T-SQL inside a stored procedure, that I can dynamically generate the SUM(Case... statements from the Select Distinct Sku2 From OrderDetailDeliveryReview query and then execute the resulting SQL code?

  Read the article

• Don't see job schedule added by sp_add_jobschedule in SQL Mgmt UI

  - by Ariel

  I'm running a script like below on a SQL Server box and, even though it finishes correctly, then when, on SQL Mgmt UI, I right click on that job's properties, go to Schedules, I cannot see the schedule just added... what am I missing? (I'm using the right job_name param, etc) thanks! BEGIN TRY BEGIN TRAN EXEC msdb.dbo.sp_add_jobschedule @job_name = 'Job name', @name=N'Job schedule name', @enabled = 0, @freq_type=1, @active_start_date=20100525, @active_start_time=60000 COMMIT TRAN END TRY BEGIN CATCH SELECT ERROR_Message(), ERROR_Line(); ROLLBACK TRAN END CATCH

  Read the article

• How to set 2 conditions / criterias for VLOOKUP / LOOKUP / etc in OpenOffice Calc (or Excel)

  - by MestreLion

  I have this spreadsheet that started as a silly aid for a game (Mafia Wars 2), but grew into a tricky spreadsheet question. In the game your character have 9 "slots" for weapons and armors, 1 for each "type": Light Weapon, Heavy Weapon, Body Armor, Head Armor, etc. So I made a list of all weapons and armors available in the game, 1 item per row. Example: SHOP ITEM TYPE ITEM NAME ATK DEF PRICE EQUIPPED? Marketplace Weapon Light Konrad Knife 16 5 5.500 Marketplace Weapon Light Ice Queen 19 6 8.200 Marketplace Armor Body Up Layered Polym 0 31 8.600 Marketplace Armor Body Up Full Shield 7 42 17.650 Marketplace Weapon Heavy Konrad Bullpup 53 25 24.500 Marketplace Weapon Heavy Full Moon Blow 73 12 24.500 x Marketplace Armor Body Low Knee Pads 17 26 14.200 x Marketplace Armor Body Low Army Boots 15 55 24.500 Bone Yard Weapon Light Bone Launcher 41 2 9.400 x Neon Strip Vehicle Ground Supercharged 41 34 24.500 Dead End Weapon Heavy Sharp Sickle 21 5 24.500 Dead End Armor Body Low Unholy Boots 5 36 15.000 Dead End Armor Head Hockey Mask 5 18 15.900 x Last columns is an indication of the items i have already bought and equipped (marked with "x"). What I need is a formula that, for each "slot" (item type), returns info related to the item of that kind that I am using. That would be: ITEM TYPE SHOP NAME ITEM NAME ATK DEF PRICE Weapon Light Bone Yard Bone Launcher 41 2 9.400 Weapon Heavy Marketplace Full Moon Blow 73 12 24.500 Weapon Special -- -- -- -- -- Armor Body Up -- -- -- -- -- Armor Body Low Marketplace Knee Pads 17 26 14.200 Armor Head Dead End Hockey Mask 5 18 15.900 Vehicle Ground -- -- -- -- -- Vehicle Water -- -- -- -- -- Vehicle Air -- -- -- -- -- The item types are fixed, so they can be hard coded. Each row for an item type. So, for 1st result line, it would return data from the row where both 2nd column is "Weapon Light" and last column is "x". Basically I need a LOOKUP (or VLOOKUP, or anything else) that uses 2 criteria to find a given row, the item type and the X marker. Question is: HOW? I am using OpenOffice Calc 3.2.1, but since it shares so many functions with MS Excel, answers for Excel are also fine (as long as it only uses regular formulas, no VBScript or Macros or VBA etc) Last but not least, suggestions / solutions for rearranging the data so it makes this problem easier to solve are also welcome. Thanks!

  Read the article

• PHP 5.3.2 + Fcgid 2.3.5 + Apache 2.2.14 + SuExec => Connection reset by peer: mod_fcgid: error readi

  - by Zigzag

  Hi, I'm trying to use PHP 5.3.2 + Fcgid 2.3.5 + Apache 2.2.14 but I always have the error : "Connection reset by peer: mod_fcgid: error reading data from FastCGI server". And Apache returns an error 500 each time I tried to execute a php page : I have compiled the Apache with this options: ./configure --with-mpm=worker --enable-userdir=shared --enable-actions=shared --enable-alias=shared --enable-auth=shared --enable-so --enable-deflate \ --enable-cache=shared --enable-disk-cache=shared --enable-info=shared --enable-rewrite=shared \ --enable-suexec=shared --with-suexec-caller=www-data --with-suexec-userdir=site --with-suexec-logfile=/usr/local/apache2/logs/suexec.log --with-suexec-docroot=/home Then PHP: ./configure --with-config-file-path=/usr/local/apache2/php --with-apxs2=/usr/local/apache2/bin/apxs --with-mysql --with-zlib --enable-exif --with-gd --enable-cgi Then FCdigd: APXS=/usr/local/apache2/bin/apxs ./configure.apxs The VHOST is: <Directory /home/website_panel/site/> FCGIWrapper /home/website_panel/cgi/php .php ... ErrorLog /home/website_panel/logs/error.log </Directory> cat /home/website_panel/logs/error.log [Sun Mar 07 22:19:41 2010] [warn] [client xx.xx.xx.xx] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server [Sun Mar 07 22:19:41 2010] [error] [client xx.xx.xx.xx] Premature end of script headers: test.php [Sun Mar 07 22:19:41 2010] [warn] [client xx.xx.xx.xx] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server [Sun Mar 07 22:19:41 2010] [error] [client xx.xx.xx.xx] Premature end of script headers: test.php [Sun Mar 07 22:19:42 2010] [warn] [client xx.xx.xx.xx] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server [Sun Mar 07 22:19:42 2010] [error] [client xx.xx.xx.xx] Premature end of script headers: test.php [Sun Mar 07 22:19:43 2010] [warn] [client xx.xx.xx.xx] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server [Sun Mar 07 22:19:43 2010] [error] [client xx.xx.xx.xx] Premature end of script headers: test.php The Suexec log: root:/usr/local/apache2# cat /var/log/apache2/suexec.log [2010-03-07 22:11:05]: uid: (1001/website_panel) gid: (1001/website_panel) cmd: php [2010-03-07 22:11:15]: uid: (1001/website_panel) gid: (1001/website_panel) cmd: php [2010-03-07 22:11:23]: uid: (1001/website_panel) gid: (1001/website_panel) cmd: php [2010-03-07 22:19:41]: uid: (1001/website_panel) gid: (1001/website_panel) cmd: php [2010-03-07 22:19:41]: uid: (1001/website_panel) gid: (1001/website_panel) cmd: php [2010-03-07 22:19:42]: uid: (1001/website_panel) gid: (1001/website_panel) cmd: php [2010-03-07 22:19:43]: uid: (1001/website_panel) gid: (1001/website_panel) cmd: php root:/usr/local/apache2# cat logs/error_log [Sun Mar 07 22:18:47 2010] [notice] suEXEC mechanism enabled (wrapper: /usr/local/apache2/bin/suexec) [Sun Mar 07 22:18:47 2010] [notice] mod_bw : Memory Allocated 0 bytes (each conf takes 32 bytes) [Sun Mar 07 22:18:47 2010] [notice] mod_bw : Version 0.7 - Initialized [0 Confs] [Sun Mar 07 22:18:47 2010] [notice] Apache/2.2.14 (Unix) mod_fcgid/2.3.5 configured -- resuming normal operations root:/usr/local/apache2# /home/website_panel/cgi/php -v PHP 5.3.2 (cli) (built: Mar 7 2010 16:01:49) Copyright (c) 1997-2010 The PHP Group Zend Engine v2.3.0, Copyright (c) 1998-2010 Zend Technologies If someone has got an idea, I want to hear it ^^ Thanks !

  Read the article

• Linking LLVM JIT Code to Static LLVM Libraries?

  - by inflector

  I'm in the process of implementing a cross-platform (Mac OS X, Windows, and Linux) application which will do lots of CPU intensive analysis of financial data. The bulk of the analysis engine will be written in C++ for speed reasons, with a user-accessible scripting engine interfacing with the C++ testing engine. I want to write several scripting front-ends over time to emulate other popular software with existing large user bases. The first front will be a VisualBasic-like scripting language. I'm thinking that LLVM would be perfect for my needs. Performance is very important because of the sheer amount of data; it can take hours or days to run a single run of tests to get an answer. I believe that using LLVM will also allow me to use a single back-end solution while I implement different front-ends for different flavors of the scripting language over time. The testing engine itself will be separated from the interface and testing will even take place in a separate process with progress and results being reported to the testing management interface. Tests will consist of scripting code integrated with the testing engine code. In a previous implementation of a similar commercial testing system I wrote, I built a fast interpreter which easily interfaced with the testing library because it was written in C++ and linked directly to the testing engine library. Callbacks from scripting code to testing library objects involved translating between the formats with significant overhead. I'm imagining that with LLVM, I could implement the callbacks into C++ directly so that I could make the scripting code work almost as if it had been written in C++. Likewise, if all the code was compiled to LLVM byte-code format, it seems like the LLVM optimizers could optimize across the boundaries between the scripting language and the testing engine code that was written in C++. I don't want to have to compile the testing engine every time. Ideally, I'd like to JIT compile only the scripting code. For small tests, I'd skip some optimization passes, while for large tests, I'd perform full optimizations during the link. So is this possible? Can I precompile the testing engine to a .o object file or .a library file and then link in the scripting code using the JIT? Finally, ideally, I'd like to have the scripting code implement specific methods as subclasses for a specific C++ class. So the C++ testing engine would only see C++ objects while the JIT setup code compiled scripting code that implemented some of the methods for the objects. It seems that if I used the right name mangling algorithm it would be relatively easy to set up the LLVM generation for the scripting language to look like a C++ method call which could then be linked into the testing engine. Thus the linking stage would go in two directions, calls from the scripting language into the testing engine objects to retrieve pricing information and test state information and calls from the testing engine of methods of some particular C++ objects where the code was supplied not from C++ but from the scripting language. In summary: 1) Can I link in precompiled (either .bc, .o, or .a) files as part of the JIT compilation, code-generation process? 2) Can I link in code using that the process in 1) above in such a way that I am able to create code that acts as if it was all written in C++?

  Read the article

• Problem with creating a newenvironment in LaTeX

  - by Andreas Grech

  I am trying to implement this new environment in LaTeX: \newenvironment{javacode}[2] {\begin{lstlisting}[language=java, label=#1, caption=#2]} {\end{lstlisting}} And then use it like such: \begin{javacode}{c}{some code} int x = 5; \end{javacode} But I am getting the following error: Overfull \hbox (6.0pt too wide) in paragraph at lines 6--6 [][][][][][][] [1] [2]) [3]) * Can anyone help as regards fixing this problem? [Update] I tried it doing it like Red-nosed unicorn instructed, and it worked correctly. But now I tried adding a \begin{singlespace} like such: \lstnewenvironment{javacode}[2] { \begin{singlespace} \lstset{language=java, label=#1, caption=#2}} { \end{singlespace} } And I got the same error: Overfull \hbox (6.0pt too wide) in paragraph at lines 6--6 [][][][][][][] [1]) [2] [3]) *

  Read the article

• Creating a function in ruby

  - by Micke

  Hello, i have some problem with creating a function to my Rails app. I want it to work like this: str = "string here" if str.within_range?(3..30) puts "It's withing the range!" end To do that i added this into my application helper: def within_range?(range) if self.is_a?(String) (range).include?(self.size) elsif self.is_a?(Integer) (range).include?(self) end end But i get this error: undefined method `within_range?' for &quot;&quot;:String Do you know what the problem is? and could you please help me. If there is a easier way please say so then. Thanks in advance, Micke.

  Read the article

• Using rest-client to upload a paperclip attachment but getting no file found error

  - by Angela

  Hello, I have a paperclip attachment that I wan to upload to a web-service using rest-client. However, when I try to run it, I get an error: No such file or directory - /system/postalimages/1/original/postcard-1.png?1274635084 But the file exists for sure: I see it in my directory. How do I debug this? Here is the code in my controller which makes the upload: def upload @postalcard = Postalcard.find(:last) response = RestClient.post('http://www.postful.com/service/upload', { :upload => { :file => File.new(@postalcard.postalimage.url,'rb') #paperclip file path } }, #end payload {"Content-Type" => @postalcard.postalimage.content_type, "Content-Length" => @postalcard.postalimage.size, "Authorization" => 'Basic dGltZm9uZzg4OEBnbWFpbC5jb206ZDlQcTVKUU4='} # end headers ) #close arguments to Restclient.post return response.body end

  Read the article

• How to handle User "confirmation" with Watir/Cucumber?

  - by Matt Darby

  I'm new to Watir and I've having a little trouble getting logged in in my tests. I use authlogic as my authentication method of choice. When a User registers, they are sent an email with a confirmation link. Clicking this link confirms their account and they can then login. The issue I'm having is how do I confirm the User when using Watir? I have so far: Given /I sign up/ do BROWSER.goto("http://localhost:3000/register") BROWSER.text_field(:id, "user_email").set("[email protected]") BROWSER.text_field(:id, "user_name").set("Foo Bar) BROWSER.text_field(:id, "user_password").set("foo bar") BROWSER.text_field(:id, "user_password_confirmation").set("foo bar") BROWSER.button(:id, "user_submit").click end Given /I am logged in via Watir/ do BROWSER.goto("http://localhost:3000/login") BROWSER.text_field(:id, "user_session_email").set("[email protected]) BROWSER.text_field(:id, "user_session_password").set("foo bar") BROWSER.button(:id, "user_session_submit").click end This correctly populates the fields and the User is saved. Now I try to confirm the User like so: Given /I am confirmed/ do User.last.confirmed! end Unfortunately this doesn't work. What am I missing?

  Read the article

• Ruby on Rails redirect_to not functioning in IF statement?

  - by Hard-Boiled Wonderland

  Hi, I am redirecting a POST request to ensure the URL is correct along with other things. The redirect worked fine before I added in the if statements for town below: if !params[:address].blank? town = Town.find(:all, :conditions => ["name = ?", params[:address]]) @towns = town if !town.blank? redirect_to '/town/' + params[:address] else @town_invalid = 'test' end end end I am sure it is something simple and that I simply cannot see it. Also if you see any glaring errors or code mishaps let me know as I am just starting out. EDIT: I should mention this is what I get back from Safari when a real town is entered: Safari can’t open the page.Safari can’t open the page “http://localhost:3000/” because the server unexpectedly dropped the connection. This sometimes occurs when the server is busy. Wait for a few minutes, and then try again. Thanks!

  Read the article

• Designing interfaces: predict methods needed, discipline yourself and deal with code that comes to m

  - by fireeyedboy

  Was: Design by contract: predict methods needed, discipline yourself and deal with code that comes to mind I like the idea of designing by contract a lot (at least, as far as I understand the principal). I believe it means you define intefaces first before you start implementing actual code, right? However, from my limited experience (3 OOP years now) I usually can't resist the urge to start coding pretty early, for several reasons: because my limited experience has shown me I am unable to predict what methods I will be needing in the interface, so I might as well start coding right away. or because I am simply too impatient to write out the whole interfaces first. or when I do try it, I still wind up implementing bits of code already, because I fear I might forget this or that imporant bit of code, that springs to mind when I am designing the interfaces. As you see, especially with the last two points, this leads to a very disorderly way of doing things. Tasks get mixed up. I should draw a clear line between designing interfaces and actual coding. If you, unlike me, are a good/disciplined planner, as intended above, how do you: ...know the majority of methods you will be needing up front so well? Especially if it's components that implement stuff you are not familiar with yet. ...resist the urge to start coding right away? ...deal with code that comes to mind when you are designing the interfaces? UPDATE: Thank you for the answers so far. Valuable insights! And... I stand corrected; it seems I misinterpreted the idea of Design By Contract. For clarity, what I actually meant was: "coming up with interface methods before implementing the actual components". An additional thing that came up in my mind is related to point 1): b) How do you know the majority of components you will be needing. How do you flesh out these things before you start actually coding? For arguments sake, let's say I'm a novice with the MVC pattern, and I wanted to implement such a component/architecture. A naive approach would be to think of: a front controller some abstract action controller some abstract view ... and be done with it, so to speak. But, being more familiar with the MVC pattern, I know now that it makes sense to also have: a request object a router a dispatcher a response object view helpers etc.. etc.. If you map this idea to some completely new component you want to develop, with which you have no experience yet; how do you come up with these sort of additional components without actually coding the thing, and stuble upon the ideas that way? How would you know up front how fine grained some components should be? Is this a matter of disciplining yourself to think it out thoroughly? Or is it a matter of being good at thinking in abstractions?

  Read the article

< Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >