Search Results

Search found 47090 results on 1884 pages for 'linux ubuntu customize'.

Page 172/1884 | < Previous Page | 168 169 170 171 172 173 174 175 176 177 178 179  | Next Page >

• Arch Linux drops me on my school network

  - by Kravlin

  I'm running a Lenovo X61 which i carry around my college for getting on the internet at various points in the day. The network has always been finicky but recently it's gotten worse. I'll connect using iwconfig, get an ip from dhcpcd and log in using vpnc to their system. Sometimes I'll stay connected for hours but most of the time within 30 seconds my network traffic will drop to zero and i'll be unable to do anything. My computer still belives it's connected, however to try again i need to put my wireless interface down, put it back up and try again. It's gotten so bad that i've got a window on my computer pinging yahoo or google constantly in order to know if i'm still able to get online. I know other people who have used Arch Linux that don't have the same problems as well as people who use Ubuntu who haven't had any problems either. It seems like my computer is a special case. Does anyone have any suggestions on how to fix it? dmesg doesn't show anything out of the ordinary going on and i don't know where else to look for errors or other things to try. Edit: this doesn't happen on my home network. It's a problem that only happens at school.

  Read the article

• What are "build-essential" & "build-dep"?

  - by Adam Siddhi

  I am researching how to install Ruby 1.9.1 in Xubuntu 10.04 and I came across the command build-essential and build-dep multiple times. Sometimes it is followed by packages and sometimes it is both preceded and post-ceded by packages. The 2 examples I am looking at are: sudo apt-get install build-essential zlib1g zlib1g-dev zlibc libruby1.9 libxml2 libxml2-dev libxslt-dev sudo apt-get build-dep ruby1.9 and sudo apt-get install ruby irb ri rdoc ruby1.8-dev libzlib-ruby libyaml-ruby libreadline-ruby libncurses-ruby libcurses-ruby libruby libruby-extras libfcgi-ruby1.8 build-essential libopenssl-ruby libdbm-ruby libdbi-ruby libdbd-sqlite3-ruby sqlite3 libsqlite3-dev libsqlite3-ruby libxml-ruby libxml2-dev

  Read the article

• linux command prompt ftp to ftp server running on windows

  - by Vass

  Hi, I am using on Windows Vista, Filezilla server. I have it set up to be accessed via outside IPs and when I use a client on the IP I have it connects normally using Filezilla client. On the same machine I have Ubuntu running in a virtual box and when using filezilla client in there it works fine. Now I want to try the command prompt. So I do the ftp xxx.xxx.xx.xx I enter the name and password and i get the ftp command prompt, but the commands are not working properly. when trying "ls" or "cd" these commands do not work. "cd" tells me that the current directory is "/" root, but this does not make sense in the windows operating system. Now the filezilla client is taking the user in the application window directly to the root folder of the permitted filespace granted to that user. How can the same be done from the command prompt, if there is a way? It is as if the command prompt takes me to the root which does not exist or even have correct permissions to move in. Is there any way to be taken to the correct directory directly, or move there especially when the slashes are the wrong way around etc? Best,

  Read the article

• Do I need to restart my server after editing fstab and mtab?

  - by jaypabs

  I'm just wondering if I need to restart my server after editing fstab and mtab. I changed something in this file manually due to problem with awstats report. I am using ISPConfig 3 with the help of the tutorial from howtoforge. But due to removing/deleting of some account, the configuration of fstab and mtab messed up. I also ask this question at howtoforge forum but until now no one has answered. If you'd like to read my question please visit it here. I tried very hard to fix the problem w/o luck. Update: Here's what happen to my fstab: Before the value was (I omitted the other): /var/log/ispconfig/httpd/mydomain.com /var/www/clients/client1/web1/log none bind,nobootwait 0 0 /var/log/ispconfig/httpd/example.com /var/www/clients/client1/web2/log none bind,nobootwait 0 0 So I changed it to the correct path: /var/log/ispconfig/httpd/mydomain.com /var/www/clients/client1/web2/log none bind,nobootwait 0 0 /var/log/ispconfig/httpd/example.com /var/www/clients/client1/web3/log none bind,nobootwait 0 0 I also found mtab to have the same value as above that's why I edited it manually. from: /var/log/ispconfig/httpd/mydomain.com /var/www/clients/client1/web1/log none rw,bind 0 0 /var/log/ispconfig/httpd/example.com /var/www/clients/client1/web2/log none rw,bind 0 0 to: /var/log/ispconfig/httpd/mydomain.com /var/www/clients/client1/web2/log none rw,bind 0 0 /var/log/ispconfig/httpd/example.com /var/www/clients/client1/web3/log none rw,bind 0 0 I edited those value because the correct path of mydomain.com and example.com should be under web2 and web3 folder respectively. As of now the log of example.com is pointed to: /var/www/clients/client1/web2/log when it should be: /var/www/clients/client1/web3/log So I am thinking that this is because of fstab and mtab. Please guide me how to point the log correctly to it's default directory. I explain the scenario one by one at this link. to dawud: Based on your example mount -o remount,noexec /var, should I run mount -o remount,noexec /var/log/ispconfig/httpd/example.com?

  Read the article

• Transmission-daemon not picking up on watch directory

  - by Mild Fuzz

  Trying to get my transmission-daemon to pick up files from a dropbox folder, to make remote starting easier (it's a headless system). As far as I can tell, the settings.json file is as expected, but none of the files I place in the folder get picked up. I have checked that dropbox is syncing correctly. Here is the whole settings.json file, but the relevant lines are included below: "watch-dir": "/home/john/Dropbox/torrents", "watch-dir-enabled": true Update It appears to be a permissions issue. From /var/log/syslog: Unable to watch "/home/john/Dropbox/torrents": Permission denied (watch.c:79) I have tried stopping the daemon - sudo service transmission-daemon stop - changing permissions of folder using chown - sudo chown -R john /home/john/Dropbox/torrents - restarting daemon - sudo service transmission-daemon start Same result, however Update 2 Permissions for the folder are: drwsrwsrwx 2 john debian-transmission 4096 2012-04-09 19:40

  Read the article

• How to connect to Sametime server from Empathy IM or Pidgin?

  - by Danny

  Does anyone know how to connect to a Sametime server from Empathy IM or Pidgin? If yes, could you describe the steps you took in order to connect? I've tried creating an account in Empathy with the respective Sametime account and password information, but it continually fails to authenticate. Thanks.

  Read the article

• file corruption on read/write 2.6.32-22-server (happens across many kernels)

  - by Jonathan

  Hi Guys, I'm having an issue where after the server has been up for a period of time (~week/few days) the server will start reading corrupt data. For instance when I run a sha1sum of a file after a fresh boot it remains the same. However after a while I will start to get segfaults and from then on whenever I read this file I get a different sha1sum. I've checked S.M.A.R.T with long tests and I've run an extended memtest86+(12 passes) My lspci is as follows: 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3) 00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] 00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller 00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller 00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3c) 00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller 00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge 00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon HD 3300 Graphics 01:05.1 Audio device: ATI Technologies Inc RS780 Azalia controller 02:00.0 Ethernet controller: Atheros Communications Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller (rev b0) 03:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. Device 3403 I could really use some help on this, do you have any idea what could cause this? It's really frustrating me as it seems to trigger entirely randomly and will not go away until I reboot. I'm also use KVM for virtualization as well as MD for software RAID on this server and the processor is a Phenom II X4 965. I don't believe it's the software raid however as this affects files also hosted on non-raid partitions so I don't know.

  Read the article

• Basic OpenVPN setup not working

  - by WalterJ89

  I am attempting to connect 2 win7 (x64+ x32) computers (there will be 4 in total) using OpenVPN. Right now they are on the same network but the intention is to be able to access the client remotely regardless of its location. The Problem I am having is I am unable to ping or tracert between the two computers. They seem to be on different subnets even though I have the mask set to 255.255.255.0. The server ends up as 10.8.0.1 255.255.255.252 and the client 10.8.0.6 255.255.255.252. And a third ends up as 10.8.0.10. I don't know if this a Windows 7 problem or something I have wrong in my config. Its a very simple set up, I'm not connecting two LANs. this is the server config (removed all the extra lines because it was too ugly) port 1194 proto udp dev tun ca keys/ca.crt cert keys/server.crt key keys/server.key # This file should be kept secret dh keys/dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt client-to-client duplicate-cn keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 6 this is the client config client dev tun proto udp remote thisdomainis.random.com 1194 resolv-retry infinite nobind persist-key persist-tun ca keys/ca.crt cert keys/client.crt key keys/client.key ns-cert-type server comp-lzo verb 6 Is there anything I missed in this? keys are all correct and the vpn's connect fine, its just the subnet or route issue. Thank You EDIT it seems on the server the openvpn-status.log has the routes for the client SERVER OpenVPN CLIENT LIST Updated,Wed May 19 18:26:32 2010 Common Name,Real Address,Bytes Received,Bytes Sent,Connected Since client,192.168.10.102:50517,19157,20208,Wed May 19 17:38:25 2010 ROUTING TABLE Virtual Address,Common Name,Real Address,Last Ref 10.8.0.6,client,192.168.10.102:50517,Wed May 19 17:38:56 2010 GLOBAL STATS Max bcast/mcast queue length,0 END Also this is from the client.log file: Which seems to be correct C:\WINDOWS\system32\route.exe ADD 10.8.0.0 MASK 255.255.255.0 10.8.0.5 Another EDIT 'route print' on the server shows the route: Destination Mask Gateway Interface 10.8.0.0 255.255.255.0 10.8.0.2 10.8.0.1 the same on the client shows 10.8.0.0 255.255.255.0 10.8.0.5 10.8.0.6 So the routes are there.. what can the problem be? Is there anything wrong with my configs? Why would OpenVPN be having problems communicating?

  Read the article

• Installing ffmpeg + dependencies on AWS Linux AMI (repo issues)

  - by HdN8

  I'm installing ffmpeg to run on an Amazon linux AMI, and have added the rpmforge repo and the dag repo. Here are some guidelines I'm using for reference: TWoZaO and Razuna The rpmforge repo has ffmpeg, but if you try to install it then it will complain that is missing dependencies (for me libSDL-1.2.so.0()(64bit)). Regardless I will install ffmpeg from svn so I can be sure to enable the options I want (namelylibx264). It seems strange to me though that SDL is not inrpmforgeordag`, and in according to both of my references above, it should be there. I tried to grab it manually from here, but it needs these dependencies, so no-go: > error: Failed dependencies: SDL = > 1.2.10-8.el5 is needed by SDL-devel-1.2.10-8.el5.x86_64 > alsa-lib-devel is needed by > SDL-devel-1.2.10-8.el5.x86_64 > libGL-devel is needed by > SDL-devel-1.2.10-8.el5.x86_64 > libGLU-devel is needed by > SDL-devel-1.2.10-8.el5.x86_64 > libSDL-1.2.so.0()(64bit) is needed by > SDL-devel-1.2.10-8.el5.x86_64 > libX11-devel is needed by > SDL-devel-1.2.10-8.el5.x86_64 > libXext-devel is needed by > SDL-devel-1.2.10-8.el5.x86_64 > libXrandr-devel is needed by > SDL-devel-1.2.10-8.el5.x86_64 > libXrender-devel is needed by > SDL-devel-1.2.10-8.el5.x86_64 > libXt-devel is needed by > SDL-devel-1.2.10-8.el5.x86_64

  Read the article

• Iptables based router inside KVM virtual machine

  - by Anton

  I have KVM virtual machine (CentOS 6.2 x64), it has 2 NIC: eth0 - real external IP 1.2.3.4 (simplified example instead of real one) eth1 - local internal IP 172.16.0.1 Now I'm trying to make port mapping 1.2.3.4:80 = 172.16.0.2:80 Current iptables rules: # Generated by iptables-save v1.4.7 on Fri Jun 29 17:53:36 2012 *nat :OUTPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -o eth0 -j MASQUERADE -A PREROUTING -p tcp -m tcp -d 1.2.3.4 --dport 80 -j DNAT --to-destination 172.16.0.2:80 COMMIT # Completed on Fri Jun 29 17:53:36 2012 # Generated by iptables-save v1.4.7 on Fri Jun 29 17:53:36 2012 *mangle :PREROUTING ACCEPT [0:0] :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] COMMIT # Completed on Fri Jun 29 17:53:36 2012 # Generated by iptables-save v1.4.7 on Fri Jun 29 17:53:36 2012 *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] COMMIT # Completed on Fri Jun 29 17:53:36 2012 But there is nothing works, I mean it does not forwards that port. Similar configuration without virtualization seems to be working. What am I missing? Thanks!

  Read the article

• Enabling vim file type plugin

  - by person

  In my .vimrc file I have this line.. filetype plugin indent on and then in ~/.vim/ftplugin/py.vimrc (I've also tried saving it as a .vim file) I've copied and pasted a vimrc file for python standards and have enabled all of the suggested settings in it (uncommented them). When I create and open a test.py file and do something like a tab, it goes 8 spaces instead of 4. Not sure what's going wrong.

  Read the article

• Not able to delete file from server with permissions of 644 via PHP script

  - by letseatfood

  I am trying to delete JPEG files that were uploaded to the server via FTP. The files are uploaded and written with permissions of 644. The owner and group of the upload directory are mike and mike. I have tried changing the owner and group to www-data, but that does not seem to work. I am trying to delete the files with a PHP script using unlink(). This works on the production server (which is a hosting service), but not my development server, which is a LAMP setup. This leads me to believe it has something to do with permissions on my development server.

  Read the article

• Same netmask or /32 for secondary IP on Linux

  - by derobert

  There appear to be (at least) two ways to add a secondary IP address to an interface on Linux. By secondary, I mean that it'll accept traffic to the IP address, and responses to connections made to that IP will use it as a source, but any traffic the box originates (e.g., an outgoing TCP connection) will not use the secondary address. Both ways start with adding the primary address, e.g., ip addr add 172.16.8.10/24 dev lan. Then I can add the secondary address with either a netmask of /24 (matching the primary) or /32. If I add it with a /24, it gets flagged secondary, so will not be used as the source of outgoing packets, but that leaves a risk of the two addresses being added in the wrong order by mistake. If I add it with /32, wrong order can't happen, but it doesn't get flagged as secondary, and I'm not sure what the bad effects of that may be. So, I'm wondering, which approach is least likely to break? (If it matters, the main service on this machine is MySQL, but it also runs NFSv3. I'm adding a second machine as a warm standby, and hope to switch between them by changing which owns the secondary IP.)

  Read the article

• Linux VLAN Bridge

  - by raspi

  I have home network with VLANs, one for LAN, one for WLAN and one for internet. I'd like to use bridging so that instead of configuring these same VLANs to every machine, they had own VLAN ID and bridges were LAN, WLAN and internet. I've tried it but for some reason keep-alive/ttl seems to get broken because SSH sessions etc suddenly disconnects. We have this same setup working in workplace for 4+ years with 100+ customers but it's custom firewall/router hardware so accessing it is impossible. I know that it runs Linux. So what is Debian/Ubuntu default network settings doing wrong or is it just NIC driver/hw problem? I've tried to mess araund with ttl etc settings without any luck. The bad stuff is happening in the bridge because current VLAN-only setup works fine. interfaces: auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 allow-hotplug eth1 iface eth0 inet static iface eth1 inet static auto vlan111 auto vlan222 auto vlan333 auto vlan444 auto br0 auto br1 auto br2 # LAN iface vlan111 inet static vlan_raw_device eth0 # WLAN iface vlan222 inet static vlan_raw_device eth0 # ADSL Modem iface vlan333 inet static vlan_raw_device eth1 # Internet iface vlan444 inet static vlan_raw_device eth0 # LAN bridge iface br0 inet static address 192.168.0.1 netmask 255.255.255.0 bridge_ports eth0.111 bridge_stp on # Internet bridge iface br1 inet static address x.x.x.x netmask x.x.x.x gateway x.x.x.x bridge_ports eth1.333 eth0.444 bridge_stp on post-up iptables -t nat -A POSTROUTING -o br1 -j MASQUERADE pre-down iptables -t nat -D POSTROUTING -o br1 -j MASQUERADE # WLAN bridge iface br2 inet static address 192.168.1.1 netmask 255.255.255.0 bridge_ports eth0.222 bridge_stp on Sysctl: net.ipv4.conf.default.forwarding=1

  Read the article

• Cannot connect to network

  - by dany

  I have a problem: I am on Debian. I configured my nic with a static ip (192.168.1.56). When I try to connect to a network, initially with ifconfig eth2 I get (correctly): eth2 inet addr:192.168.1.56 .... inet6 addr: fe80:221:ff:fe96:4598/64 but after a few seconds the 192.168.1.56 disappears and after some other seconds disappears the inet6 address too. When I press in the nm-applet it requires me the password but in the meantime it try to connect. At uni, the connection is a DHCP one. It works for the first few seconds but after it doesn't. Any possible solution? Here it is the relevant part of the syslog: (static ip configuration) http://pastebin.com/u3BPAsda

  Read the article

• trouble shooting ntfs-loop-xen combination in wubi based grub of Ubuntu

  - by Registered User

  Here is a situation I installed Ubuntu on a laptop using Wubi in Windows 7 drive.*The laptop is not mine.*I have installed and things worked by now perfectly without any problem.We are trying to set up a Xen (virtualization)environment in this laptop. After setting up every thing cleanly.When I needed to boot with following grub entries menuentry "Xen Linux 2.6.32.27" { insmod ntfs set root='(hd0,2)' loopback loop0 /ubuntu/disks/root.disk set root=(loop0) multiboot /boot/xen.gz module /boot/vmlinuz-2.6.32.27 dummy=dummy root=/dev/sda2 loop=/ubuntu/disks/root.disk ro console=tty0 module /boot/initrd.img-2.6.32.27 } I got error file not found error unknown command 'multiboot' error unknown command 'module' error unknown command 'module' Now to dig this issue further I reboot the machine and go to grub command prompt and manually pass on each of the above parameters which you see in the grub entry when I reached grub> insmod multiboot then I got following message on screen error:file not found. It looks like this wubi+ grub setup has just enough modules to use loopback file on ntfs, but the ACTUAL /boot directory is on the loopback NOT ntfs (hd0,2). Therefore any attempt to read any files from (hd0,2) simply wont work, cause there's no file there.I need to use insmod multiboot and command multiboot and module which are available in grub on a normal install without Wubi.But since the laptop is not mine so I am not allowed to partition it and have to make it work in this situation only. While a normal Kernel is still booting? How can I get module multiboot in this Wubi based install.

  Read the article

• Problem in accessing Windows shared folder on Ubuntu using terminal

  - by vikramtheone

  Hi Guys, Description I have 2 systems with me, one running on Windows(Host) and one on Ubuntu, both on a LAN. On the Windows(Host) I develop software intended for the Linux system and because the Linux system has little external memory, my idea to overcome this is by making the project folder on the Host side a Shared Folder with full access and access it on Ubuntu over the network. To achieve this, I have installed Samba on Ubuntu, when I go to Places -> Network I can see the shared project folder and I simply mount it. A link appears on the desktop. Next, using Nautilus I open the link and I can access the contents of the shared folder. Problem Even though I mount the shared project folder, I don't see it appearing in the /media or the /mnt folder, as a result of this I don't know what path to use to access this folder, from the terminal. For example: When, I mounted my USB stick, as expected, a link for the device appears on the Desktop and I also see a folder in the media folder. So, similarly, a mounted shared folder should have appeared on the /mnt folder, too. Can anyone suggest what I should do now? There are many posts around, but no solid solution for this problem. Help!!! :) Vikram

  Read the article

• Corosync :: Restarting some resources after Lan connectivity issue

  - by moebius_eye

  I am currently looking into corosync to build a two-node cluster. So, I've got it working fine, and it does what I want to do, which is: Lost connectivity between the two nodes gives the first node '10node' both Failover Wan IPs. (aka resources WanCluster100 and WanCluster101 ) '11node' does nothing. He "thinks" he still has his Failover Wan IP. (aka WanCluster101) But it doesn't do this: '11node' should restart the WanCluster101 resource when the connectivity with the other node is back. This is to prevent a condition where node10 simply dies (and thus does not get 11node's Failover Wan IP), resulting in a situation where none of the nodes have 10node's failover IP because 10node is down 11node has "given back" his failover Wan IP. Here's the current configuration I'm working on. node 10sch \ attributes standby="off" node 11sch \ attributes standby="off" primitive LanCluster100 ocf:heartbeat:IPaddr2 \ params ip="172.25.0.100" cidr_netmask="32" nic="eth3" \ op monitor interval="10s" \ meta is-managed="true" target-role="Started" primitive LanCluster101 ocf:heartbeat:IPaddr2 \ params ip="172.25.0.101" cidr_netmask="32" nic="eth3" \ op monitor interval="10s" \ meta is-managed="true" target-role="Started" primitive Ping100 ocf:pacemaker:ping \ params host_list="192.0.2.1" multiplier="500" dampen="15s" \ op monitor interval="5s" \ meta target-role="Started" primitive Ping101 ocf:pacemaker:ping \ params host_list="192.0.2.1" multiplier="500" dampen="15s" \ op monitor interval="5s" \ meta target-role="Started" primitive WanCluster100 ocf:heartbeat:IPaddr2 \ params ip="192.0.2.100" cidr_netmask="32" nic="eth2" \ op monitor interval="10s" \ meta target-role="Started" primitive WanCluster101 ocf:heartbeat:IPaddr2 \ params ip="192.0.2.101" cidr_netmask="32" nic="eth2" \ op monitor interval="10s" \ meta target-role="Started" primitive Website0 ocf:heartbeat:apache \ params configfile="/etc/apache2/apache2.conf" options="-DSSL" \ operations $id="Website-one" \ op start interval="0" timeout="40" \ op stop interval="0" timeout="60" \ op monitor interval="10" timeout="120" start-delay="0" statusurl="http://127.0.0.1/server-status/" \ meta target-role="Started" primitive Website1 ocf:heartbeat:apache \ params configfile="/etc/apache2/apache2.conf.1" options="-DSSL" \ operations $id="Website-two" \ op start interval="0" timeout="40" \ op stop interval="0" timeout="60" \ op monitor interval="10" timeout="120" start-delay="0" statusurl="http://127.0.0.1/server-status/" \ meta target-role="Started" group All100 WanCluster100 LanCluster100 group All101 WanCluster101 LanCluster101 location AlwaysPing100WithNode10 Ping100 \ rule $id="AlWaysPing100WithNode10-rule" inf: #uname eq 10sch location AlwaysPing101WithNode11 Ping101 \ rule $id="AlWaysPing101WithNode11-rule" inf: #uname eq 11sch location NeverLan100WithNode11 LanCluster100 \ rule $id="RAND1083308" -inf: #uname eq 11sch location NeverPing100WithNode11 Ping100 \ rule $id="NeverPing100WithNode11-rule" -inf: #uname eq 11sch location NeverPing101WithNode10 Ping101 \ rule $id="NeverPing101WithNode10-rule" -inf: #uname eq 10sch location Website0NeedsConnectivity Website0 \ rule $id="Website0NeedsConnectivity-rule" -inf: not_defined pingd or pingd lte 0 location Website1NeedsConnectivity Website1 \ rule $id="Website1NeedsConnectivity-rule" -inf: not_defined pingd or pingd lte 0 colocation Never -inf: LanCluster101 LanCluster100 colocation Never2 -inf: WanCluster100 LanCluster101 colocation NeverBothWebsitesTogether -inf: Website0 Website1 property $id="cib-bootstrap-options" \ dc-version="1.1.7-ee0730e13d124c3d58f00016c3376a1de5323cff" \ cluster-infrastructure="openais" \ expected-quorum-votes="2" \ no-quorum-policy="ignore" \ stonith-enabled="false" \ last-lrm-refresh="1408954702" \ maintenance-mode="false" rsc_defaults $id="rsc-options" \ resource-stickiness="100" \ migration-threshold="3" I also have a less important question concerning this line: colocation NeverBothLans -inf: LanCluster101 LanCluster100 How do I tell it that this collocation only applies to '11node'.

  Read the article

• how to switch to another window when Ctrl + B not works for tmux?

  - by hugemeow

  as we all know tmux is quite nice tool, but there is some scenerios that Ctrl + B cannot be used for example: i sshd to server A, and now i connect to A's tmux pty, so Ctrl + B is captured by server A. then i ssh to server B from server A, and there is also tmux running on Server B, this time, Ctrl + B only works for server A, and cannot be used by server B, so if i want to switch windows for server B, what should i do then?

  Read the article

• Munin "Available entropy" when using address space layout randomization

  - by clawspoon

  Having just configured munin for statistics logging on my gentoo server (hardened profile), I am noticing that my "Available entropy" is consitently in the 200-300 range. This seems way to low, so I checked it manually using the command $ cat /proc/sys/kernel/random/entropy_avail 3544 Odd. Consistently very low values in Munin and practically filled up when checking manually. After thinking about the problem for a while I came to the conclusion that the problem is probably that I'm using Adress Space Layout Randomization which is using the entropy when running commands/programs. Since Munin runs a whole slew of programs all the entropy is used up, and Munin then measures how much entropy there is, resulting in the low values. Does anyone have any experience with this? How can this be avoided?

  Read the article

• linux: mount old ATA disk to USB adapter

  - by 130490868091234

  I am trying to recover data from an old Linux that was installed in a computer on an ATA hard drive. I found a ScanLogic Corp. SL11R-IDE IDE Bridge (04ce:0002), an ATA adapter to USB 1.0 like the one in the picture: and after switching it on, I plugged it into a laptop with Ubuntu 12.04. I am used to the drives being automatically mounted, but this one doesn't show up in /media. After doing a dmesg, all I got is this: [215298.671924] usb 2-1.1: new full-speed USB device number 5 using ehci_hcd [215298.767330] scsi19 : usb-storage 2-1.1:1.0 [215299.841701] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.017258] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.197050] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.372730] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd I tried plugging in the adapter to the three different USB ports in my laptop (one of them USB 3.0), but got no luck with any of them. I get different devices under, for example: /dev/bus/usb/003/002 or /dev/bus/usb/002/004, but I don't get any /dev/sdbN links. The output blkid -o list -c /dev/null is just the laptop's partitions. I have tried taking out the jumper, putting it as master and as CS Enabled, but didn't change the result. Any ideas?

  Read the article

• Only One GPU Detected in the Nvidia Quadro NVS 450

  - by Kyle Brandt

  I just built myself an new workstation and now only 2 of 3 monitors are working. I built the nvidia driver by downloading it and installing with ./Nvidia... Before when I ran nvidia-settings I saw two GPUs listed but now I only see one. Xorg Config (Not sure how I ended up with 3 devices in there): # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:39 PDT 2010 Section "ServerLayout" # Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor2" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:6:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+275, DFP-3: nvidia-auto-select +1680+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-3" Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-3: nvidia-auto-select +1680+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "DFP-3: nvidia-auto-select +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection lscpi: 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:02.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 2 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:10.0 PIC: Intel Corporation 5520/5500/X58 Physical and Link Layer Registers Port 0 (rev 13) 00:10.1 PIC: Intel Corporation 5520/5500/X58 Routing and Protocol Layer Registers Port 0 (rev 13) 00:11.0 PIC: Intel Corporation 5520/5500 Physical and Link Layer Registers Port 1 (rev 13) 00:11.1 PIC: Intel Corporation 5520/5500 Routing & Protocol Layer Register Port 1 (rev 13) 00:13.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub I/OxAPIC Interrupt Controller (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:15.0 PIC: Intel Corporation 5520/5500/X58 Trusted Execution Technology Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 01:00.0 IDE interface: Device 1b4b:91a3 (rev 11) 02:00.0 USB Controller: NEC Corporation Device 0194 (rev 03) 03:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:02.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 05:00.0 3D controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 06:00.0 VGA compatible controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 08:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 08:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 09:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 09:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 0b:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)

  Read the article

• TFTP Timing Out on Ubuntu VM

  - by valsidalv

  I'm running a Windows 7 PC with VMware installed which has my Ubuntu (10.04 Lucid Lynx). I recently installed a DHCP server and TFTP (Xinet tftpd) using these instructions. I've mapped a network drive so that my Windows has access to all the files in my VM through a 192.x.x.x IP address. I'm trying to throw some custom firmware onto a router. The router has its own built-in TFTP utility that will download the image. It successfully manages to do everything but it is slow because it writes it to flash memory. There is another method that is much quicker because it writes to RAM directly but it must use the TFTP server in Ubuntu. The issue I'm facing is that the Ubuntu TFTP transfer seems to be timing out. The transfer starts but never goes past ~60%. Here's my /etc/xinetd.d/tftp file (similar to a known working config): service tftp { protocol = udp port = 69 socket_type = dgram wait = yes user = nobody server = /usr/sbin/in.tftpd server_args = -s /home/user/tftp/ disable = no cps = 300 2 per_source = 60 } I've done some searching but can't find any parameters for this file to control timeout time or number of retries. The last two arguments (cps, per_source) and completely alien to me (can anyone explain). I have a few possible solutions but the easiest would be to get this TFTP server working. Can anyone help? Either with a timeout configuration or maybe even recommend a different TFTP server? Thanks!

  Read the article

• Xorg: How can I map AltGr to the CapsLock Key (to toggle 3rd level symbols)

  - by basweber

  Hi, as many others I don't need Capslock. I want to reassign it to have the function of AltGr. I use Kubuntu 9.10 but I think there must be a solution which is distribution independent. I already tried to use setxkbmap or xmodmap. Using xmodmap at least I managed that the CapsLock key to behaves like the Delete key by following this description. But I could not achieve assigning the AltGr behavior to CapsLock.

  Read the article

• SSH session becomes unresponsive when logged into Ubuntu Server virtual machine using VirtualBox

  - by nickbart

  Hi everyone, I'm really at my wits end here, so I'm hoping someone here can help me. I have a virtual machine running Ubuntu Server 9.10. It's just a small development environment so I can keep my code separate from the test and production environments. I am running it through VirtualBox 3.1.6 on a laptop running Ubuntu Desktop 9.10. I have it set up with a bridged network connection and it is bridged to my laptop's wireless adapter. We have no wired connections in this office. I boot up the VM and everything is fine. I can SSH into it using gnome-terminal and for a while everything is Kosher. Then seemingly randomly, the SSH terminal session with hang. No error message, nothing; it just becomes unresponsive. If I go to the VirtualBox terminal I find the VM itself is perfectly fine. It can ping and I can SSH out with it. If I restart the networking on the VM the SSH session in my gnome-terminal will most of the time become responsive again. Here's an interesting point, the SSH session will sometimes die right in the middle of me typing something (this points to it not being an idle session issue) and if I go to the VirtualBox terminal and restart the networking and then return to my gnome-terminal SSH session I find that it will come back to life and what I typed when the session hung originally will magically type itself in to the buffer. So, my input is getting stored somewhere and just can't make its way to the VM until the networking on the VM is restarted. I've tried different versions of VirtualBox and used vmdk images and vdi images and nothing seems to work. I can't tell if the problem is with my laptop, VirtualBox, or the Ubuntu Server VDI. Is there anyway to debug this issue? Or has anyone out there seen anything similar? Your help is much appreciated. Nick

  Read the article

< Previous Page | 168 169 170 171 172 173 174 175 176 177 178 179  | Next Page >