Search Results

Search found 7936 results on 318 pages for 'kernel modules'.

Page 175/318 | < Previous Page | 171 172 173 174 175 176 177 178 179 180 181 182  | Next Page >

  • Slow writing HDD speed, Ubuntu 12.04 64-bit, Thinkpad T520i

    - by pyc
    It seems that (but I'm not completely sure), that when I'm copying files from gigabit network to HDD, I can't use full potential of the network which in my case is about 60 MB/s, because HDD writing is so slow like lower than 10 MB/s, and also it's slowing down the whole system which becomes pretty much unresponsive, almost impossible to work with. Copying files to samba share residing at Ubuntu machine, connected to share from Windows 7, I'm completely sure my network equipment is OK, and there's no CPU intensive process on Ubuntu except smbd getting about 10-20% from time to time which I think is OK. Something here is burried deep I think, maybe even in kernel. Already tried to switch from AHCI to compatibility mode, and turning acpi on and off - nothing helped. So it's like HDD buffer is full and emptying slowly while machine is sluggish, load is about 3 to 4. Somebody experienced the similar problems? Some help on troubleshooting process and identifying the cause would be helpful too :) Thanks!

    Read the article

  • vmbuilder fails on chroot

    - by Bruce
    I am trying to install virtual machine with this command, but have no success: vmbuilder kvm ubuntu --verbose --suite precise --flavour virtual \ --part partitions.txt --ip 192.168.1.3 --hostname edb1 --arch amd64 \ -o --libvirt qemu:///system --user someuser --pass somepass \ --raw /home/virtual-machines/edb1.disk1.img \ --raw /home/virtual-machines/edb1.disk2.img \ --domain somedomain.com --mem 4096 --cpus 4 This is the error: ... I: Extracting xz-utils... I: Extracting zlib1g... W: Failure trying to run: chroot /tmp/tmp_JdKzu mount -t proc proc /proc , stderr: The host kernel is not original but modified by server provider. Why is the chroot needed for installation?

    Read the article

  • My system screen goes black and displays Term Signal Killed?

    - by Quandite
    My computer will often just die randomly while I am using it. The screen goes black and sometimes displays the words TERM signal killed along with other things and sometimes it displays nothing. The writing stays on the screen momentarily before it disappears to just black. I then have to hold in the power button to turn it off and then re boot. Here are the specs... help! Ubuntu 10.04(lucid) Kernel Linux 2.6.32-23-generic GNOME 2.30.2 memory 495.7 MiB processor Intel(R) Pentium(R) 4CPU 1.80GHz

    Read the article

  • Alps touchpad detected as a mouse, can't enable/disable multitouch

    - by Shota Bakuradze
    Now I know that this has been asked several times here but I couldn't find any decent solution to it. I am running Ubuntu 12.04 on my DELL N5110 and my touchpad is detected as a mouse, So I don't have the touchpad options availiable. Can't use multitouch and can't disable it either. I have tried the dkms driver from this link. But when I tried to install it with dpkg -i command, dpkg returns the following error: ERROR (dkms apport): unable to determine source package for psmouse-alps-dkms Error! Bad return status for module build on kernel: 3.2.0-25-generic-pae (i686) Consult /var/lib/dkms/psmouse-alps/0.10/build/make.log for more information. I have installed all the updates as well. Can someone help me out with this issue?

    Read the article

  • Getting Started with Oracle Fusion Project Portfolio Management

    Designed from the ground-up using the latest technology advances and incorporating the best practices gathered from Oracle's thousands of customers, Fusion Applications are 100 percent open standards-based business applications that set a new standard for the way we innovate, work and adopt technology. Delivered as a complete suite of modular applications, Fusion Applications work with your existing portfolio to evolve your business to a new level of performance. In this AppCast, part of a special series on Fusion Applications, you hear about the unique advantages of Fusion Project Portfolio Management, learn about the scope of the first release and discover how Fusion PPM modules can be used to complement and enhance your existing Projects solutions.

    Read the article

  • Slow Wireless Reconnect After Suspend

    - by nrhine1
    I a Broadcom 4312 using the STA drivers, I reinstalled ubuntu because the b43 drivers were giving me a huge hassle along with some weird kernel issues. My wireless speed is fine, everything works well, except upon restart of computer and after taking the computer out of suspend. It takes about 30-45 seconds for the wireless to reconnect, and I think it is a driver issue (I clicked on the network manager at the top and for about 30 seconds there are no wireless networks listed.) I tried this advice already: http://lilserenity.wordpress.com/2007/10/31/fix-ubuntu-dropping-wireless-on-suspendhibernate-resume/ which basically says to change this: STOP_SERVICES="" to STOP_SERVICES="networking" in the file /etc/default/acpi-support This did not help anything. Something to note is that the issue does not occur when I am logging back in after already logging in once and logging out.

    Read the article

  • Is there an industry standard for systems registered user permissions in terms of database model?

    - by EASI
    I developed many applications with registered user access for my enterprise clients. In many years I have changed my way of doing it, specially because I used many programming languages and database types along time. Some of them not very simple as view, create and/or edit permissions for each module in the application, or light as access or can't access certain module. But now that I am developing a very extensive application with many modules and many kinds of users to access them, I was wondering if there is an standard model for doing it, because I already see that's the simple or the light way won't be enough.

    Read the article

  • Problem with Ubuntu 12.04 boot

    - by Etienne
    I'm having a problem as stated in the title regarding bootup. What happens basically is that after grub is loaded the system doesn't boot. I get a black screen with cursor blinking then the screen darkens ( switches off ) and keyboard is unresponsive. Today I have re-installed everything on a new hard drive and it happened again. This has been observed when running kernel 3.5.0-30 and 3.5.0-28. System is an HP6550b. Can someone help me on this please ? Many Thanks!

    Read the article

  • How to Create a Skin Object from an OWS Configuration - 2 Videos

    In this video tutorial we walk you through how to create and place Open Web Studio skin objects directly into your DotNetNuke skin.We cover how to create an OWS menu and feedback form and how to convert those modules into DNN Skin Objects.The videos contain:Video 1 - Building the New OWS Configuration and Creating the Menu SystemVideo 2 - Placing the OWS Skin Object within the Skin File and Creating a Feedback Skin ObjectHow to Create a Skin Object from an OWS Configuration - 2 Videos Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Typescript - A free add-on for Visual Studio 2012

    - by TATWORTH
    At http://www.microsoft.com/en-us/download/details.aspx?id=34790, Microsoft are providing a free add-on for Visual Studio. If you have any version of Visual Studio 2012, it provides an editor for Typescript."TypeScript is a language for application-scale JavaScript. TypeScript adds optional types, classes, and modules to JavaScript. TypeScript supports tools for large-scale JavaScript applications for any browser, for any host, on any OS. TypeScript compiles to clean, readable, standards-based JavaScript. Try it out at http://www.typescriptlang.org/playground."I look forward to type-safe JavaScript!There is a tutorial for it at http://www.typescriptlang.org/tutorial/

    Read the article

  • Sites with overlapping code-bases. Developing multiple sites with little changes

    - by Web Developer
    I have to develop 3 different sites video.com for hosting video audio.com for hosting audio docs.com for hosting docs. domain names for example only Almost 80% of the functionality is the same for all the three, with remaining 20% being completely different features... How do I handle this? How does sites like SO handle this? I am developing this in YII framework and was thinking of having these different features as modules but in this case the menu/code links in html code can become difficult.

    Read the article

  • Unwittingly activate wrong wireless driver and now cannot activate the correct one

    - by Sumeth Chaochuti
    I just installed Kubuntu 10.10 on my MacBook 3,1 and found no wireless connection. Using KPackageKit I activated Broadcom b43 because it had already been selected for me. When I subsequently tried to activate Broadcom STA, however, I was returned with an error. After reading Jockey log I removed the wrong driver and reinstalled all drivers so that I can activate the correct one. It hasn't work even though KPackageKit now shows that I have installed: bcmwl-kernel-source bcmwl-modaliases broadcom-sta-common broadcom-sta-source According to the log it appears as if there are conflicts but I don't know how to rectify it. I'm completely new to the platform, just started using Kubuntu 2 days ago. I'll appreciate any advice anyone can give. Thanks.

    Read the article

  • Color distortion with Intel HD4000 over HDMI output - VGA is fine

    - by Simon Möller
    I set up a new system with i5 3570k gigabyte z77 d3h using integrated graphics (HD4000) and I've installed the 64bit Desktop version of 12.04. Connected to my Acer Screen via HDMI, the colors are horribly distorted. I think the biggest issue is that black appears as greenish. Over VGA everything is fine. Interestingly, I once observed that connecting both, the VGA and the HDMI cable at the same time, solved the issue. Ubuntu thought 2 screens were connected, I mirrored the image, and over HDMI the colors looked fine. However, after a reboot I am now unable to reproduce this behavior. I read frequently, that Intel hardware should be supported out of the box by Ubuntu but it doesn't seem to be the case here. Should I upgrade my Kernel? If so, which version would you recommend? Thank you for your answers!

    Read the article

  • Embedding Pygame to C++ [closed]

    - by Pendertuga
    If embedding Pygame to C++ to have a game be an executable, is there any extra process I would have to use in order to use Pygame functions when embedding into C++? As opposed to just writing embedding code in C++ for normal Python code? To clear cut the question I want to know if it's the same process without having to call different functions. EDIT: My question is if I have to call different functions in C++ when embedding Python code that uses Pygame modules. I am NOT using pygame2exe nor py2exe. I never even mentioned those. My question is solely about code embedding.

    Read the article

  • 3D mobile game development [on hold]

    - by SCM
    I am not a developer or programmer and, I am planning an educative project that will involve having students to develop a cross-platform, 3D mobile game, similar to the SimCity concept. I need to write a project requirement and I'd like to pick someone's brain to understand what's involved in developing such a project: -Is it realistic to have one or two students to do it? and along their other modules at uni? - How much time can it take to develop from scratch? - what are the different skills required? Thank you All SCM

    Read the article

  • How do you track Production tasks.

    - by M.C
    I manage a team of coders (5people) that maintain a few modules in a large project. On top of doing coding, we also do production operational tasks (like doing server housekeeping, batch backlog tracking) These tasks are done daily, done by 1 person, and is rotated weekly The problem is this: These tasks are routine, but there I cant think of a practical way of ensuring the person does what he is supposed to do. I thought of using spreadsheets to track, or to the extent of doing a paper checklist, which the person on duty will have to physically sign off. I just want the guy on duty to remember and execute every daily item. What works on your project?

    Read the article

  • Line6 UX1 soundcard and Ubuntu

    - by the_drow
    I own a Line6 UX1 soundcard and I would like to make it work for Ubuntu. I have followed the instructions here and it worked. But at some point I upgraded my kernel version (not sure what uname -a prints but it's related) and it stopped working. Here's what uname -a prints: Linux ubuntu 2.6.32-29-generic 58-Ubuntu SMP Fri Feb 11 20:52:10 UTC 2011 x86_64 GNU/Linux I figured out that maybe it's installed per version so I used svn update and hit make again. My guess was right as it copied the relevant files to the new version's folder. I restarted and still nothing. Should I revert to an older version? Or is there a solution here?

    Read the article

  • Detect Subscribers To Event In Real Time

    - by xyz247
    I'm using C++ in the QT framework to write an application that detects an application running in memory. I can use the FindWindow method, but that requires that I know the windows title before hand. What would be the best method for identifying behavior of the application in memory to match it to a title? For example, if I know (before scanning) that a given application subscribes to the OnKeyPress event, is it possible to hook to it that method, detect all of the subscribers and enumerate them to find the application i'm looking for? If so, how would I go about doing that without integrating into the kernel? Thanks in advance for all the responses.

    Read the article

  • How can i get ubuntu to run smoother?

    - by Knuckles
    I am relatively new to ubuntu [I've used it before and loved it but one day i just randomly couldn't connect to the internet anymore so i switched back to windows... also netflix doesn't work in ubuntu...] and I've noticed that when i used it before everything ran very smoothly and the window animations and stuff like that were just beautiful. now though, everything is choppy and just ugly really. I wanna say its because i was using an older kernel but i really don't know. Anyway, i guess my point is, How can i get it to look pretty again? i really do wish i could be more descriptive but... yeah... I'm on Maverick btw. if anymore information is required i will happily oblige, just let me know.

    Read the article

  • No useful DVB-T card found

    - by Edu
    I am using Ubuntu 12.04 3.2.0-26 kernel and I just added a DVB-T card. I did install the media_build as in (http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers) After that the Restricted Drivers appeared on the screen and I installed the Firmware for DVB Cards. lsusb shows Bus 002 Device 005: ID 048d:9005 Integrated Technology Express, Inc. which is my card. lsmod shows these things regarding dvb dvb_usb_it913x 22173 0 dvb_usb 32369 1 dvb_usb_it913x dvb_core 110010 1 dvb_usb rc_core 26343 2 dvb_usb_it913x,dvb_usb Nevertheless there is no /dev/dvb on my linux and Kaffeine does not find the TV turner. Can anybody help me installing my TV Card? Thanks

    Read the article

  • How can I solve display glitches and poor performance with ATI fglrx driver on my ThinkPad X100e?

    - by rewbs
    Hi all, I noticed that video performance on my Thinkpad X100e was very poor compared to Windows 7, so I installed the ATI fglrx proprietary drivers by using the "Additional Drivers" dialogue box. The system has an ATI Radeon Mobility HD 3200 chip. The result of installing the drivers is pretty devastatingly negative, with symptoms such as skewed content in windows, browser tabs and text boxes failing to refresh when their content changes. In fact, please excuse typos in this post, because I can't really see what I am typing. :) I also notice that HD video playback performance is no better - perhaps even worse - than prior to installing the drivers. Example of what I see: Here's the output of fglrxinfo: display: :0.0 screen: 0 OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: ATI Radeon HD 3200 Graphics OpenGL version string: 3.3.10237 Compatibility Profile Context Output of lspci | grep -i vga: 01:05.0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] I'm on Ubuntu 10.10 with kernel 2.6.35-22-generic-pae. What can I try? Many thanks, -R

    Read the article

  • Build graph of dependencies (calls) in javascript [on hold]

    - by Maximus
    I'm new to a project and I see that everything is so interwoven that small changes here makes stuff break there. I'd like to refactor it and separate into modules. For that I'm going to need a tool that can build a graph of dependencies (calls) to visualize the connections. There are many tools like that for languages like C#, but I've found little information about the available tools for JavaScript. Has anyone done something like this? What tools have you used?

    Read the article

  • VMWare Player pauses often

    - by pascal
    I'm using a 64bit Windows 8 inside vmplayer, with 2 virtual processor cores, virtual hard disk resides on a fast local disc and is not preallocated; host CPU is Intel i7 3770, should be capable of hardware virtualisation but I don't know if VMWare uses it; NAT networking; Sound card connected, USB connected, accelerated 3D graphics (NVidia 313.30 on host) My problem is, that the VM often pauses for a few seconds, and then speeds up for a few seconds to reach real time again. Time in the VM actually moves faster after the pause, for example all animations using timers speed up. When running, the vmware-vmx process shows ~150% CPU usage in top, but 0% when pausing (and D state i.e. waiting for IO). iotop shows normal disk writes from vmware-vmx threads, but during pauses, the flush kernel thread uses 99%. Are there some options to try so that VMWare doesn't wait for IO? I've tried a few things available from the GUI but the issue never went away…

    Read the article

  • How do I fix this half screen problem?

    - by link1275
    I just installed 12.04, and my entire screen is being displayed entirely on the top half of my screen. The bottom half is always black or some technical garbage from the boot up. To interact with the bottom half of the screen I have to move the mouse over the screen to pull part of the bottom half of the screen on top and vice-versa. Does anyone know how to fix this? Also my computer told me, at startup, to go to here: http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware.

    Read the article

  • How to Create a DotNetNuke Skin Object from an OWS Configuration - 2 Videos

    In this tutorial we walk you through how to create and place Open Web Studio skin objects directly into your DotNetNuke skin. We cover how to create an OWS menu and feedback form and how to convert those modules into DNN Skin Objects. The videos contain: Video 1 - Building the New OWS Configuration and Creating the Menu System Video 2 - Placing the OWS Skin Object within the Skin File and Creating a Feedback Skin Object Total Time Length: 18minsDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

< Previous Page | 171 172 173 174 175 176 177 178 179 180 181 182  | Next Page >