Search Results

Search found 52714 results on 2109 pages for 'error correction'.

Page 1799/2109 | < Previous Page | 1795 1796 1797 1798 1799 1800 1801 1802 1803 1804 1805 1806  | Next Page >

• Nginx Ubuntu Postfix Config - Can't connect to incoming IMAP server 'server not responding' but can send mail via outgoing using same details?

  - by daveaspinall

  I'm pretty to new server admin and especially nginx but seem to be getting ok fine apart from accessing my mail via my iPhone? I've changed my domain to 'domain.com' The thing is I can send mail via my outgoing IMAP server but can't connect to the incoming one? I just get the message "the mail server at mail.domain.com is not responding" /etc/postfix/main.cf alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes config_directory = /etc/postfix home_mailbox = Maildir/ inet_interfaces = all inet_protocols = all mailbox_command = mailbox_size_limit = 0 mydestination = domain.com, mail.domain.com, localhost.com, , localhost, localhost.localdomain mydomain = domain.com myhostname = mail.domain.com mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = /etc/mailname recipient_delimiter = + relayhost = smtp_tls_note_starttls_offer = yes smtp_tls_security_level = may smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = smtpd_sasl_security_options = noanonymous smtpd_tls_CAfile = /etc/ssl/certs/cacert.pem smtpd_tls_auth_only = no smtpd_tls_cert_file = /etc/ssl/certs/smtpd.crt smtpd_tls_key_file = /etc/ssl/private/smtpd.key smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_security_level = may smtpd_tls_session_cache_timeout = 3600s tls_random_source = dev:/dev/urandom telnet localhost 25 ehlo locahost 250-mail.domain.com 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-STARTTLS 250-AUTH LOGIN PLAIN 250-AUTH=LOGIN PLAIN 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN Using the following details to connect: username password hostname: mail.domain.com port: 25 iptables --list Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination I also sent mail to the server as a test and got this missage if it helps? Technical details of temporary failure: [mail.domain.com. (10): Connection refused] I also looked in /var/log/mail.log and it has multiple entries of: postfix/smtpd[12239]: connect from 5acefc9a.bb.sky.com[90.206.252.xxx] Mar 23 06:47:09 new-domain postfix/smtpd[12239]: lost connection after CONNECT from 5acefc9a.bb.sky.com[90.206.252.154] Notice new-domain which is incorrect but the server hostname and hostname in the configs are correct? I recently moves servers and the host has set the primary domain on the service as new-domain.com so this may be the issue? Like I said, it works to connect to outgoing server, but incoming gets the not responding error? Any idea would be much appreciated!

  Read the article

• dell latitude XT touch screen issue

  - by Jake

  yesterday I installed windows 7 ultimate after I had the enterprise version on this machine for a few months. the installation went smoothly and everything worked fine except for the finger detection of the screen(only the pen worked) and the bottom screen buttons for rotating and so. so I started to install all the missing drivers dell recommends for this model on their site, but once I tried to install N-Trig degitizer driver the installation said it was unsuccessful and since then the touch stopped working completely! I tried system restore but it didn't help so I went on and formatted the harddisk completely once again and installed windows but that didn't work either. I tried to install the N-Trig's driver but it was alarting for a fatal error and said that no device was detected. same story with N-Trig rollback. so I checked the device manager and saw an "unknown device" with VID and PID values set as 0000. I figured the N-Trig driver might have messed with the device firmware or something and now it doesnt know it's ID and munufactor... Is there anything that can be done? like forcing the N-Trig driver to install on this device or something? please help!

  Read the article

• All applications quit when printing on Mac OS X 10.5.8

  - by Tamany

  I recently ran a software update. I'm not sure if my problems are associated with this but I'm pretty sure they are as I printed successfully before update. I checked the log at time of printing: 03/05/2010 22:03:15 Microsoft Word[697] *** -[NSCFString _getValue:forType:]: unrecognized selector sent to instance 0x17a82b50 03/05/2010 22:03:15 [0x0-0x51051].com.microsoft.Word[697] Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext 03/05/2010 22:03:16 [0x0-0x51051].com.microsoft.Word[697] Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext 03/05/2010 22:03:16 [0x0-0x51051].com.microsoft.Word[697] Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext 03/05/2010 22:03:16 [0x0-0x51051].com.microsoft.Word[697] Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext 03/05/2010 22:03:16 [0x0-0x51051].com.microsoft.Word[697] Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext 03/05/2010 22:03:16 [0x0-0x51051].com.microsoft.Word[697] Ignoring Quickdraw drawing between QDBeginCGContext and QDEndCGContext 03/05/2010 22:03:17 [0x0-0x51051].com.microsoft.Word[697] Mon May 3 22:03:17 leopards-imac-2.local Word[697] <Error>: The function `CGPDFDocumentGetMediaBox' is obsolete and will be removed in an upcoming update. Unfortunately, this application, or a library it uses, is using this obsolete function, and is thereby contributing to an overall degradation of system performance. Please use `CGPDFPageGetBoxRect' instead. 03/05/2010 22:22:09 Microsoft Word[697] *** -[NSCFString _getValue:forType:]: unrecognized selector sent to instance 0x1b036500 Any thoughts on how to fix this?

  Read the article

• Internet connection problem,ping ok , but outlook and browsers dont work

  - by Ashian

  Hi, From some days ago I have a big problem on my laptop( run windows xp sp3) When I connect to internet I can ping web sites but when try to browse them some times it work correctly and some times the connection to server intrupted and I have to refresh the page several times. in this case browser show a connection problem immediatly after I click on address bar or a link on page( wihtout any try to connect to server) I use FireFox and opera and both of them have this problem. try another ISP and still I have this problem. I didnt use any proxy server and check the proxy setting. In this case Outlook also can't connect to mail server. this problem anfter some time or after restart windows have been fixed for a while. I check for virus and can't find anything. Is there any idea how can I fix it? UPDATE: Thanks for your responses. I test them , also I use Open DNS setting and that dosent help me. last night I see that my local web application ( such as Adsl modem config web site , and sites that I set up on windows xo IIS ) aslo can't open and Internal Communication error apears ( Opera Message) that didnt relate to DNS settings or Internet connection.

  Read the article

• Attempting to emulate Apache MultiViews with Nginx try_files

  - by Samuel Bierwagen

  I want a request to http://example.com/foobar to return http://example.com/foobar.jpg. (Or .gif, .html, .whatever) This is trivial to do with Apache MultiViews, and it seems like it would be equally easy in Nginx. This question seems to imply that it'd be easy as try_files $uri $uri/ index.php; in the location block, but that doesn't work. try_files $uri $uri/ =404; doesn't work, nor does try_files $uri =404; or try_files $uri.* =404; Moving it between my location / { block and the regexp which matches images has no effect. Crucially, try_files $uri.jpg =404; does work, but only for .jpg files, and it throws a configuration error if I use more than one try_files rule in a location block! The current server { block: server { listen 80; server_name example.org www.example.org; access_log /var/log/nginx/vhosts.access.log; root /srv/www/vhosts/example; location / { root /srv/www/vhosts/example; } location ~* \.(?:ico|css|js|gif|jpe?g|es|png)$ { expires max; add_header Cache-Control public; try_files $uri =404; } } Nginx version is 1.1.14.

  Read the article

• Centos 6.2 postfix install dependency issues

  - by Mishari

  I am administrating a VPS running cPanel and I'm trying to install postfix. Redhat-release says the version is CentOS release 6.2 (Final) and uname -a says: Linux server.mydomain.com 2.6.32-220.el6.i686 #1 SMP Tue Dec 6 16:15:40 GMT 2011 i686 i686 i386 GNU/Linux This is how I'm installing postfix (I had tried to solve the problem earlier by installing epel). # yum install postfix Loaded plugins: fastestmirror, security Loading mirror speeds from cached hostfile * epel: mirror.cogentco.com Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package postfix.i686 2:2.6.6-2.2.el6_1 will be installed --> Processing Dependency: mysql-libs for package: 2:postfix-2.6.6-2.2.el6_1.i686 --> Finished Dependency Resolution Error: Package: 2:postfix-2.6.6-2.2.el6_1.i686 (centos-burstnet) Requires: mysql-libs You could try using --skip-broken to work around the problem Attempts to install mysql-libs tells me several files conflict with "MySQL-server-5.1.61-0.glibc23.i386" I'm not sure why or how this is happening, does anyone know how to resolve this? Surely Centos 6.2 could not have shipped with a broken postfix.

  Read the article

• Apache: Isn't chmod 755 enough to set up symlink or alias on Apache httpd on Mac OS 10.5?

  - by eed3si9n

  On my Mac OS 10.5 machine, I would like to set up a subfolder of ~/Documents like ~/Documents/foo/html to be http://localhost/foo. The first thing I thought of doing is using Alias as follows: Alias /foo /Users/someone/Documents/foo/html <Directory "/Users/someone/Documents/foo/html"> Options Indexes FollowSymLinks MultiViews Order allow,deny Allow from all </Directory> This got me 403 Forbidden. In the error_log I got: [error] [client ::1] (13)Permission denied: access to /foo denied The subfolder in question has chmod 755 access. I've tried specifying likes like http://localhost/foo/test.php, but that didn't work either. Next, I tried the symlink route. Went into /Library/WebServer/Documents and made a symlink to ~/Documents/foo/html. The document root has Options Indexes FollowSymLinks MultiViews This still got me 403 Forbidden: Symbolic link not allowed or link target not accessible: /Library/WebServer/Documents/foo What else do I need to set this up? Solution: $ chmod 755 ~/Documents In general, the folder to be shared and all of its ancestor folder needs to be viewable by the www service user.

  Read the article

• nginx: js file loads indifferently every refresh

  - by poymode

  I have this nginx problem wherein a js file in a rails app loads indifferently. Whenever I try to access the JS file in the browser and refresh the page, the scrollbar changes length meaning sometimes it loads half the js page, sometimes the whole and sometimes just a part of it. the js file size is 71K. my nginx server is on different server,separate from my rails app. when I try to access the js file directly through the app server, lets say 10.48.30.150:3000/javascripts/file.js it works fine and doesnt show any half-loaded page. but when I use the nginx server which upstreams the rails app, it shows the indifferent page loads. here is my nginx http conf error_log /usr/local/nginx/logs/error.log; pid /usr/local/nginx/logs/nginx.pid; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; server_names_hash_bucket_size 256; access_log /usr/local/nginx/logs/access.log; sendfile on; #tcp_nopush on; keepalive_timeout 0; tcp_nodelay on; #gzip on; #gzip_min_length 4096; #gzip_buffers 16 8k; #gzip_types application/x-javascript text/css text/plain; large_client_header_buffers 4 8k; client_max_body_size 2G; include /usr/local/nginx/conf.d/*.conf; }

  Read the article

• Cannot write to directory after taking ownership

  - by jeff charles

  I had a directory on an internal hard-drive that was created in an old Windows 7 install. After re-installing my operating system, when I try to create a new directory inside that directory, I get an Access Denied message. This isn't a protected directory, just a random directory I created at the drive root (that drive was not the C drive in either install). I tried to take ownership by opening folder properties, going to the Security tab, clicking on Advanced, going to Owner tab, clicking on Edit, selecting my user account, checking Replace owner on subcontainers and objects, and clicking Apply. There were no error messages and I closed the dialogs. I rebooted, checked the owner on that folder and a couple subfolders and it appears to be set correctly. I am still getting an Access Denied message however when trying to create a directory in it. I've also tried using attrib -R . to remove any possible readonly attribute inside the directory in an admin command prompt but am still unable to create a directory using a non-admin prompt (it does work in an admin prompt). Is there anything I can do to get write access to that folder and it's subcontents in a non-elevated context without disabling UAC?

  Read the article

• P2V Wouldn't Boot, Rebuilt initrd, Need to Clean Up

  - by Mike Soule

  We have a CentOS 5.4 server (build 2.6.18-164.el5xen). We went to P2V this server so we can have redundancy, the physical only has one PSU. The P2V only completed 99% of the way, we have a VMWare ticket opened, but they marked the ticket as low priority. I was able to boot into a rescue disc of Red Hat 5.4 and rebuild the initrd with the help of this blog post. Now the only issue is the original server had a modified initrd, which was also from a different OS build and made by an outside provider. We do not have a document outlining modifications. My question is, is it at all possible to copy the initrd off of the physical server and replace it on the virtual and some how have the virtual machine boot? Thanks for any input. Edit: I copied the initrd img from the physical and it recreated the original issue. Here is a screen capture of the error. http://i.imgur.com/MqC73.jpg Edit2: echo Scanning logical volumes lvm vgscan --ignorelockingfailure echo Activating logical volumes lvm vgchange -ay --ignorelockingfailure VolGroup00 resume /dev/VolGroup00/LogVol01 echo Creating root device. mkrootdev -t ext3 -o defaults,ro /dev/VolGroup00/LogVol00 echo Mounting root filesystem. mount /sysroot

  Read the article

• nginx giving of 404 when using set in an if-block

  - by ba

  I've just started using nginx and I'm now trying to make it play nice with the Wordpress plugin WP-SuperCache which adds static files of my blog posts. To serve the static file I need to make sure that some cookies aren't set, that it's not a POST-request and making sure the cached/static file exist. I found this guide and it seems like a good fit. But I've noticed that as soon as I try to set something inside an if my site starta giving 404s on an URL that isn't rewritten. The location block of the configuration: location /blog { index index.php; set $supercache_file ''; set $supercache_ok 1; if ($request_method = POST) { set $supercache_ok 0; } if ($http_cookie ~* "(comment_author_|wordpress|wp-postpass_)") { set $supercache_ok '0'; } if ($supercache_ok = '1') { set $supercache_file '$document_root/blog/wp-content/cache/supercache/$http_host/$1/index.html.gz'; } if (-f $supercache_file) { rewrite ^(.*)$ $supercache_file break; } try_files $uri $uri/ @wordpress; } The above doesn't work, and if I remove all the ifs above and add if ($http_host = 'mydomain.tld') { set $supercache_ok = 1; } and then I get the exact same message in the errors.log. Namely: 2010/05/12 19:53:39 [error] 15977#0: *84 "/home/ba/www/domain.tld/blog/2010/05/blogpost/index.php" is not found (2: No such file or directory), client: <ip>, server: domain.tld, request: "GET /blog/2010/05/blogpost/ HTTP/1.1", host: "domain.tld", referrer: "http://domain.tld/blog/" Remove the if and everything works as it should. I'm stymied, no idea at all where I should start searching. =/ ba@cell: ~> nginx -v nginx version: nginx/0.7.65

  Read the article

• Stepmania + KDE4 = sound problem

  - by picca

  I cannot manage to get KDE4 + stepmania working. If I run StepMania I always get: StepMania 3.9 Log starting 2010-12-24 14:52:48 Loading window: gtk OS: Linux ver 020636 Crash backtrace component: x86 custom backtrace Crash lookup component: dladdr Crash demangle component: cxa_demangle Runtime library: glibc 2.11.2 Threads library: NPTL 2.11.2 TLS is available ALSA: Advanced Linux Sound Architecture Driver Version 1.0.23. ALSA Driver: 0: HDA ATI SB [SB], device 0: STAC92xx Analog [STAC92xx Analog], 0/1 subdevices avail ALSA Driver: 0: HDA ATI SB [SB], device 1: STAC92xx Digital [STAC92xx Digital], 1/1 subdevices avail Couldn't load driver ALSA: dsnd_pcm_open(hw:0): Device or resource busy Mixing 0.000000 ahead in 0 Mix() calls Couldn't load driver ALSA-sw: dsnd_pcm_open(hw:0): Device or resource busy Mixing 0.000000 ahead in 0 Mix() calls Couldn't load driver OSS: RageSound_OSS: Couldn't open /dev/dsp: Device or resource busy Language: english Theme: default Error: Couldn't find a sound driver that works I found that in StepMania/Data/StepMania.ini I should add following line: SoundDevice=default That enables me to run StepMania, but I don't have any sound. Which is pretty bad for an application like this one. I'm quite sure that the problem is in phonon that is blocking the audio device to which StepMania needs to access directly. I think that I can fix this if I run other (lighter) window-manager than KDE4. But that is not a solution occasional linux user. Do I have any chance to get StepMania under KDE4 completely working?

  Read the article

• krenew command not working : Permission Denied

  - by prathmesh.kallurkar

  I am using a Linux server to perform my simulations. The login and the file-system of the server are protected using kerberos. The file-system is supported using NFS. Since my simulations take a lot of time to run, my ssh sessions used to hang regularly. So, I have started running my simulations in byobu (similar to screen). In order to make sure that my kerberos session remains active, I am using the krenew command. I have entered the following command in my .bash_profile file. (I am sure that it is called for every login) killall -9 krenew 2> /dev/null krenew -b -t -K 10 So everytime I ssh to the server, I kill the existing krenew command. Then, I spawn a new krenew command -b (which runs in background), -t (I forgot why I was using this option !), and -K 10 (It must run after every 10 minutes and refresh the kerberos cache). When I run the simulations, It runs for 14 hours and then suddenly, I am getting error for reading file Permission Denied Is the command that I am running incorrect ??

  Read the article

• Changing the current URL but serving content from another (same domain) - ProxyPass?

  - by zigojacko

  I've been banging my head against the wall with this for months now so I hope someone on here will be able to finally advise what is needed for this. I have some URL's like this:- domain.com/category/subcat/filter/brand And I wish to rewrite the URL's to:- domain.com/category/brand-subcat Content loads fine at the first URL, I just want to show it at a different URL - is URL masking the correct term for this? I have a RewriteRule in .htaccess that should do this job as far as I believe:- RewriteRule ^([a-zA-Z]+)/([a-zA-Z]+)/filter/([a-zA-Z]+)$ $1/$3-$2 This isn't actually modifying the URL at all though on a Magento website (mod_rewrite is enabled and plenty of other rewrites are working from the same .htaccess). So firstly, I want to know is what I am trying to achieve definitely possible? If so, what is this process even called? Secondly, does this need to be handled using ProxyPass and then use a [P] flag with the rewrite rule? I assume the Apache server doesn't have mod_proxy enabled currently because when I add a [P] flag, the URL returns a 403 forbidden error with the full server path for the current URL. Please could anyone kindly advise what on earth I need to do to achieve this?

  Read the article

• How to find the IP Address of a vm running on VMware (or other methods of using VM)

  - by sixtyfootersdude

  I am running VMware Workstation on a Linux box. When I power on a centOS (Linux) virtual machine I cannot get mouse or keyboard control of the machine. I suspect that it has something to do with the error message: You do not have VMware Tools installed in this guest. Chose "Install VMware Tools" from the VM menu. If I click on that menu option it inserts a virtual cd with drivers etc. This does not help me since I don't have keyboard or mouse control over the machine. I was thinking that if I could figure out the IP address or hostname I could use any number of protocols to get into the machine (SSH comes to mind). How can I get the IP address or hostname of this machine? Note: I did not create this machine. A coworker created it who is no longer with the company. Would save me a lot of time if I could get into the machine. I have login credentials so that won't be a problem.

  Read the article

• EC2 kernel decision and issues with creating a new machine with my AMI

  - by roacha

  I could really use some advice. I started a new instance on EC2 using Amazon's AMI and during the deployment process I selected a Kernel ID of "Use Default". I then configured my server the way that I wanted to and took a snapshot of it. I then created my own AMI to create new servers with. When I try and create a new server with this AMI the server fails to start and I get the error: EXT3-fs: sda1: couldn't mount because of unsupported optional features (240). Which appears to happen because I am selecting a kernel id of "Use default" again when building my second server. I have read that in order for this to work I need to choose the same kernel id that was used in my original server. I have deleted my original server and don't know what it was using. What is the best process to follow in order to not have these issues? Should I choose "Use Default" for my original server? How do you know which kernel it selected? Then should I just document this and always specify this during the deployment of my next servers using my custom AMI? OR should I choose a custom kernel id during the initial build and always use this one moving ahead hoping Amazon never retires it? Thanks for any advice!

  Read the article

• DirectAdmin Centos4 server has virus

  - by Rogier21

  Hello all, I have a problem with a webserver that runs Centos4 with DirectAdmin. Since a few weeks some websites hosted on it are not redirecting on search engines properly, they are redirected to some malware site, resulting in a ban from google. Now I have used 3 virusscanners: ClamAV: Didn't find anything Bitdefender: Found a 2-3 files with JS infection, deleted them AVG: Finds lots of files, but doesn't have the option to clean! The virus that it finds is: JS/Redir JS/Dropper Still the strange thing is: website a (www.aa.com) does not have any infected files (have gone through all the files manually, is a custom PHP app, nothing special) but does still have the same virus. Website b (www.bb.com) does have the infected files as only one. I deleted all these files and suspended the account, but no luck, still the same error. I do get the log entries on the website from the searchengines so the DNS entries are not changed. But now I have gone through the httpd files but cannot find anything. Where can I start looking for this?

  Read the article

• Dealing with upgrade of libevent on Amazon AWS

  - by Dreen

  I am building an application (in Python) on Amazon EC2 that has a following dependency chain: gevent-websocket ---> gevent ---> libevent The last one (libevent) got upgraded on Sunday and my server is now generating this error: (...) File "/usr/lib/python2.6/site-packages/gevent-0.13.7-py2.6-linux-x86_64.egg/gevent/__init__.py", line 41, in <module> from gevent import core ImportError: libevent-1.4.so.2: cannot open shared object file: No such file or directory Not wanting to spend much time on the issue, I tried to mitigate it by creating a symlink to an always-recent version: $ sudo ln -s /usr/lib64/libevent.so /usr/lib64/libevent-1.4.so.2 But it didn't quite work: (...) File "/usr/lib/python2.6/site-packages/gevent-0.13.7-py2.6-linux-x86_64.egg/gevent/__init__.py", line 41, in <module> from gevent import core ImportError: /usr/lib/python2.6/site-packages/gevent-0.13.7-py2.6-linux-x86_64.egg/gevent/core.so: undefined symbol: current_base I am a bit stumped as to how to proceed. Should I create more symlinks? To what? Or is there a better way to solve this problem... PS. For the record I am using Amazon AMI.

  Read the article

• How to tell nginx to honor backend's cache?

  - by ChocoDeveloper

  I'm using php-fpm with nginx as http server (I don't know much about reverse proxies, I just installed it and didn't touch anything), without Apache nor Varnish. I need nginx to understand and honor the http headers I send. I tried with this config (taken from the docs) but didn't work: /etc/nginx/nginx.conf: fastcgi_cache_path /var/lib/nginx/cache levels=1:2 keys_zone=website:10m inactive=10m; fastcgi_cache_key "$scheme$request_method$host$request_uri"; /etc/nginx/sites-available/website: server { fastcgi_cache website; #fastcgi_cache_valid 200 302 1h; #fastcgi_cache_valid 301 1d; #fastcgi_cache_valid any 1m; #fastcgi_cache_min_uses 1; #fastcgi_cache_use_stale error timeout invalid_header http_503; add_header X-Cache $upstream_cache_status; } I always get "MISS" and the cache dir is empty. If I uncomment the other directives, I get hit, but I don't want those "dumb" settings, I need to control them within my backend. For example, if my backend says "public, s-maxage=10", the cache should be considered stale after 10 secs. Instead, nginx will store it for 1h, because of these directives. I was thinking whether I should try proxy_cache, not sure what's the difference. In both fastcgi and proxy modules docs it says this: The cache honors backend's Cache-Control, Expires, and etc. since version 0.7.48, Cache-Control: private and no-store only since 0.7.66, though. Vary handling is not implemented. nginx version: nginx/1.1.19 Any thoughts? pd: I also have the reverse proxy that is offered by Symfony2 (which I turn off to use nginx's). The headers are interpreted correctly by it, so I think I'm doing it right.

  Read the article

• Upgrading PHP, MySQL old-passwords issue

  - by Rushyo

  I've inherited a Windows 2k3 server running an XAMPP-installation from the stone age. I needed to upgrade PHP to facilitate an upgrade to MediaWiki to facilitate a new MediaWiki extension (to facilitate some documentation to facilitate doing my job to facilitate getting paid to facilit... you get the idea). However... installing a new version of PHP resulted in PHP's MySQL libraries refusing to communicate using MySQL's 'old style' 152-bit passwords. Not a problem in theory. The MySQL installation is post-4.1, so it should have the functionality to upgrade the user's passwords from 152-bit to 328-bit (what a weird hashing algorithm...). I ran the following: SET PASSWORD = PASSWORD('foo'); on MySQL but querying: SELECT user, password FROM mysql.user; returned just the same password I started out with - 152-bit. Now... I suspect you're thinking 'AHA! old-passwords is on!'. Unfortunately it's not - I've disabled it in the configuration (explicitly set it to 0), made doubly sure I have an absolute reference to that configuration file and ensured the service isn't using the --old-passwords flag. The service was reset after each and every operation. So I went onto another system and generated the 328-bit hash on there, copying the hash over to the first MySQL instance. Unfortunately, that didn't work either (I did remember to FLUSH PRIVILEGES). The application error is: "'mysqlnd cannot connect to MySQL 4.1+ using the old insecure authentication. Please use an administration tool [...snip...] Is there anything else I can try to get PHP to recognise MySQL as not using the 'old insecure authentication'? MySQL seems to be stuck in 'old-passwords' mode and I can't get it out of it.

  Read the article

• SBS 2008 R2: Did something change with anonymous relays?

  - by gravyface

  Have noticed that prior documentation on setting up anonymous relays in SBS 2008 no longer work without some additional configuration. Used to be able to follow this documentation, which is basically: setup a new receive connector add the IP address(es) that will be permitted to relay check off "anonymous" under Permission Group and then run the Exchange shell script to grant permissions. Now what seems to be happening is that if the permitted IP address happens to fall within the same address space as another more restrictive Receive Connector (like the "Default SBS08" one) and possibly if it's ahead of the new Receive Connector alphabetically (haven't tested that yet), the relay attempt fails with "Client Was Not Authenticated" error. To get it to work, I had to modify the scope of the "Default SBS08" Receive Connector to exclude the one LAN IP that I wanted to allow relaying for. I can't recall ever having to do this for Exchange 2007 Standard and/or any other SBS 2008 servers I've setup over the last couple of years and I don't remember doing this and the wiki entry I added at the office doesn't mention it either. So my question is, has anyone else experienced this? Has there been a new change with R2 or perhaps an Exchange Service Pack?

  Read the article

• How can I get around windows 8.1 store (& metro apps) not working with UAC disabled

  - by Enigma

  I have UAC disabled because it is annoying and causes more problems that it could ever possibly solve, at least for me. Here is yet another problem, and it seems to be due to a recent update as I don't remember it in the past. Even with a MS account, I can't use the store because UAC is disabled. How can I get around this? Short term I can just enable it, reboot, use store, disable it, reboot and be on my way but there has to be a better way (other than MS getting their software completely right - like that will happen anytime, ever) Edit: Apparently this is far more of an issue than I originally thought. Now every(?)many metro apps requires UAC. Anyone aware of the update this got rolled in with? Thankfully netflix isn't affected which is the only metro app I use at the moment. What I see: Event Log info: Activation of app winstore_cw5n1h2txyewy!Windows.Store failed with error: This app can't be activated when UAC is disabled. See the Microsoft-Windows-TWinUI/Operational log for additional information.

  Read the article

• Office documents on intranet all requiring second login and can't pass auth? Disable webdav?

  - by DOTang

  I am not sure what is going on, but recently all the Office documents on our intranet get prompted a second time for login and according to the error logs it looks like it's trying to use webdav to open (an editable?) version of the document to save directly on the server? We have no sharepoint server setup or anything, but this shouldn't be happening. All I want is for the document to be saved or opened from a local copy in temp like normal. Here is the log: Line 57499: 2011-04-12 15:57:10 (ip) OPTIONS (address) - 443 (username) (user ip) Microsoft-WebDAV-MiniRedir/6.1.7601 - 401 1 1326 1525 238 0 Line 57500: 2011-04-12 15:57:10 (ip) OPTIONS (address) - 443 (username) (user ip) Microsoft-WebDAV-MiniRedir/6.1.7601 - 401 1 1326 1525 238 0 Line 57501: 2011-04-12 15:57:10 (ip) OPTIONS (address) - 443 (username) (user ip) Microsoft-WebDAV-MiniRedir/6.1.7601 - 401 1 1326 1525 238 0 The log basically contains a bunch of these. How can I disable this behavior so that office documents that are downloaded aren't attempted to be used through webdav?? Edit: I should clarify behavior, it asks if you want to save or open it, upon choosing open open, it asks to re-authenicate, you put in the user information and the login box comes up 3 times acting like you entered the wrong password. For some users, after passing the login box the third time, it still opens up, for others their browser just locks up. It also doesn't even look like webdav is installed on our server, I see no config options in IIS for it as outlined on this page: http://learn.iis.net/page.aspx/350/installing-and-configuring-webdav-on-iis-7/#001

  Read the article

• logfile deleted on Oracle database how to re-create it?

  - by Daniel

  for my database assignment we were looking into 'database corruption' and I was asked to delete the second redo log file which I have done with the command: rm log02a.rdo this was in the $HOME/ORADATA/u03 directory. Now I started up my database using startup pfile=$PFILE nomount then I mounted it using the command alter database mount; now when I try to open it alter database open; it gives me the error: ORA-03113: end-of-file on communication channel Process ID: 22125 Session ID: 25 Serial number: 1 I am assuming this is because the second redo log file is missing. There is still log01a.rdo, but not the one I have deleted. How can I go about recovering this now so that I can open my database again? I have looked into the database created scripts, and it specified the log02a.rdo file to be size 10M and part of group 2. If I do select group#, member from v$logfile; I get: 1 /oradata/student_db/user06/ORADATA/u03/log01a.rdo 2 /oradata/student_db/user06/ORADATA/u03/log02a.rdo 3 /oradata/student_db/user06/ORADATA/u03/log03a.rdo 4 /oradata/student_db/user06/ORADATA/u03/log04a.rdo So it is part of group 2. If I try to add the log02a.rdo file again "already part of the database". If I drop group 2 and then add it again with these commands: ALTER DATABASE ADD LOGFILE GROUP 2 ('$HOME/ORADATA/u03/log02a.rdo') SIZE 10M; Nothing. Supposedly alters the database, but it still won't start up. Any ideas what I can do to re-create this and be able to open my database again?

  Read the article

• Network Sharing Issues

  - by Mark Kramer

  I have two computers I want to have on a network share together (so the laptop can print through the desktop's printer). These are both connected to the same router. (One wired and one wireless) And they both have the same workgroup name. However, when I type "net view" in the command prompt, the only computer that shows up is the computer I type the command into. How do I get these computers to be shared with each other? Update: The tower is running Windows XP, the Laptop is running Windows 7. I have disabled the Firewall on both until I get this set up. Update 2: Typing the command net view on my desktop is acting very strangely. Noe sometimes it only shows itself on the list of computers, sometimes it shows itself and the laptop and sometimes it doesn't work at all and displays system error 6118. I typed net view into the command prompt on the Windows 7 laptop and both computers showed up, so I went to connect to the desktop from the laptop and it said the dekptop could not be found, even though it is showing up int he list of shared computers. Here are supporting pictures (these are coming from the laptop)

  Read the article

< Previous Page | 1795 1796 1797 1798 1799 1800 1801 1802 1803 1804 1805 1806  | Next Page >