Search Results

Search found 1456 results on 59 pages for 'wall'.

Page 18/59 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

  • Software to measure power draw of HP Server

    - by tombull89
    I'm after some software to measure the power draw of a HP Server, namely a DL360 series. I know Nagios is used for logging and monitering but I'm not sure if it logs power usage as well. I've also tried to find the HP Server Management package but am not sure if this shows power usage either. I'm thinking my best bet would to buy some sort of device that goes inbetween the wall and the servers plug. Can anybody suggest what would do for me?

    Read the article

  • What other protocols must not be fire-walled for FTP to work?

    - by Chris
    my Netgear router randomly reset itself the other day loosing all of my config settings: DSL details, Firewall rules, the lot! So I set about restoring all of the details manually, but when it came to configuring the firewall I wanted improve the security by explicitly setting 'deny' rules for everything that I figured is 'non-essential', and (although not necessary) whilst I was at it I set explicit 'allow' for the 'essential' protocols. I'll admit now I didn't really know what I was doing and everything was just 'my best guess', but I enabled only DNS, HTTP, HTTPS, FTP, SFTP, TFTP with everything else blocked. This did not work for me as I could not access 99% of web sites (although strangely Google worked!), so I played around a bit more and found that (oddly) if I disabled just the explicit 'allow' rules then everything worked fine, for browsing anyway. Today I came to work on some web-sites via FTP and just could not get a consistent connection, it kept dropping out after a few files or being blocked by the server or simply not connecting. It would authenticate okay but then stop when retrieving the initial directory listing! e.g.: Status: Delaying connection for 1 second due to previously failed connection attempt... Status: Resolving address of ftp.domain.co.uk Status: Resolving address of ftp.domain.co.uk Status: Connecting to 123.123.123.123:21... Status: Connecting to 123.123.123.123:21... Status: Connection established, waiting for welcome message... Status: Connection established, waiting for welcome message... Response: 421 Too many connections (8) from this IP Error: Could not connect to server Status: Delaying connection for 5 seconds due to previously failed connection attempt... Response: 421 Too many connections (8) from this IP Error: Could not connect to server Status: Delaying connection for 5 seconds due to previously failed connection attempt... I've checked and re-checked the FTP settings (they worked before anyway), I have Googled the I.T. out of the various protocols that I have blocked in the fire-wall but none seem essential to FTP (other than FTP/SFTP etc. which I have passively enabled). I'm (clearly) no server engineer, or protocols / fire-wall expert so I was hoping that some one could maybe shed some light on why my FTP is failing. I've been wondering if I ought to be allowing BGP, BOOTP and/or IDENT (or any others)? What other protocols are required for FTP? Thanks in advance!

    Read the article

  • Best Filesystem to use for Desktop Linux?

    - by contagious
    I'm going to be building a fancy new desktop soon, and I want to experiment with file systems. I know that ext3 is the most common for linux, but what about ext4, or zfs? Are their any pros or cons to certain ones? I won't be doing anything spectacularly off the wall, just using it as my main box. It is a good possibility that it will double as my web server, though.

    Read the article

  • Revolutionary brand powder packing machine price from affecting marketplace boom and put on uniform in addition to a lengthy service life

    - by user74606
    In mining in stone crushing, our machinery company's encounter becomes much more apparent. As a consequence of production capacity in between 600~800t/h of mining stone crusher, stone is mine Mobile Cone Crushing Plant Price 25~40 times, effectively solved the initially mining stone crusher operation because of low yield prices, no upkeep problems. Full chunk of mining stone crusher. Maximum particle size for crushing 1000x1200mm, an effective answer for the original side is mine stone provide, storing significant chunks of stone can not use complications in mines. Completed goods granularity is modest, only 2~15mm, an effective option for the original mine stone size, generally blocking chute production was an issue even the grinding machine. Two types of material mixed great uniformity, desulfurization of mining stone by adding weight considerably. Present quantity added is often reached 60%, effectively minimizing the cost of raw supplies. Electrical energy consumption has fallen. Dropped 1~2KWh/t tons of mining stone electrical energy consumption, annual electricity savings of one hundred,000 yuan. Efficient labor intensity of workers and also the atmosphere. Due to mine stone powder packing machine price a high degree of automation, with out human make contact with supplies, workers working circumstances enhanced significantly. Positive aspects, and along with mine for stone crushing, CS series cone Crusher has the following efficiency traits. CS series cone Crusher Chamber is divided into 3 unique designs, the user is usually chosen in accordance with the scenario on site crushing efficiency is high, uniform item size, grain shape, rolling mortar wall friction and put on uniform in addition to a extended service life of crushing cavity-. CS series cone Crusher utilizes a one of a kind dust-proof seal, sealing dependable, properly extend the service life of the lubricant replacement cycle and parts. CS series Sprial Sand washer price manufacture of important components to choose unique materials. Each and every stroke left rolling mortar wall of broken cone distances, by permitting a lot more products into the crushing cavity, as well as the formation of big discharge volume, speed of supplies by way of the crushing Chamber. This machine makes use of the principle of crushing cavity, also as unique laminated crushing, particle fragmentation, so that the completed product drastically improved the proportions of a cube, needle-shaped stones to lower particle levels extra evenly.

    Read the article

  • I need Internet Security software with following properties

    - by Eias.N
    Hello ,, I want to own an Internet Security software , but I prefer that it has following properties : Not a heavy one that killing the machine (Like Norton) . Delete the viruses , and don't keep it after clean it . The most important off all : Has an Offline databases that Can I download and add to program database without connecting to Internet (Not Like KIS 2010) Containing (anti spam -anti Virus - Fire wall - ....... ) So what is in your mind?(Don't tell me AVG I tested it)

    Read the article

  • When spliting MP4s with ffmpeg how do I include metadata?

    - by Josh
    I have a few MP4s that i want to upload to my flickr account but they have a maximum size of 500mb as mine is only about 550 i was planing to simply split them in half then upload them, but i want to make sure all the meta data is included but it does not seem to be. I have tried each of the following with no luck, (at the end of this post i have the original and the new ffprobe outputs): ffmpeg -ss 00:00:00.00 -t 00:04:19.35 -i SANY0069.MP4 -acodec copy -vcodec copy -map_metadata 0:0 SANY0069A.MP4 ffmpeg -ss 00:00:00.00 -t 00:04:19.35 -i SANY0069.MP4 -acodec copy -vcodec copy -map_meta_data SANY0069.MP4:SANY0069A.MP4 SANY0069A.MP4 with the this one I manually produced the individual meta tags that i took from this command ffmpeg -i SANY0069A.MP4 -f ffmetadata meta.txt ffmpeg -ss 00:00:00.00 -t 00:04:19.35 -i SANY0069.MP4 -acodec copy -vcodec copy -metadata major_brand="mp42" -metadata minor_version="1" -metadata compatible_brands="mp42avc1" -metadata creation_time="2012-09-29 09:05:50" -metadata comment="SANYO DIGITAL CAMERA CA9" -metadata comment-eng="SANYO DIGITAL CAMERA CA9" SANY0069A.MP4 using the output of the former command i also tried this: ffmpeg -ss 00:00:00.00 -t 00:04:19.35 -i SANY0069.MP4 -acodec copy -vcodec copy -f ffmetadata -i meta.txt SANY0069A.MP4 Output: sample output from my first command: ffmpeg -ss 00:00:00.00 -t 00:04:19.35 -i SANY0069.MP4 -acodec copy -vcodec copy -map_metadata 0:0 SANY0069A.MP4 ffmpeg version 0.8.12, Copyright (c) 2000-2011 the FFmpeg developers built on Jun 13 2012 09:57:38 with gcc 4.6.3 20120306 (Red Hat 4.6.3-2) configuration: --prefix=/usr --bindir=/usr/bin --datadir=/usr/share/ffmpeg --incdir=/usr/include/ffmpeg --libdir=/usr/lib64 --mandir=/usr/share/man --arch=x86_64 --extra-cflags='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic' --enable-bzlib --enable-libcelt --enable-libdc1394 --enable-libdirac --enable-libfreetype --enable-libgsm --enable-libmp3lame --enable-libopenjpeg --enable-librtmp --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxvid --enable-x11grab --enable-avfilter --enable-postproc --enable-pthreads --disable-static --enable-shared --enable-gpl --disable-debug --disable-stripping --shlibdir=/usr/lib64 --enable-runtime-cpudetect libavutil 51. 9. 1 / 51. 9. 1 libavcodec 53. 8. 0 / 53. 8. 0 libavformat 53. 5. 0 / 53. 5. 0 libavdevice 53. 1. 1 / 53. 1. 1 libavfilter 2. 23. 0 / 2. 23. 0 libswscale 2. 0. 0 / 2. 0. 0 libpostproc 51. 2. 0 / 51. 2. 0 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'SANY0069.MP4': Metadata: major_brand : mp42 minor_version : 1 compatible_brands: mp42avc1 creation_time : 2012-09-29 09:05:50 comment : SANYO DIGITAL CAMERA CA9 comment-eng : SANYO DIGITAL CAMERA CA9 Duration: 00:08:38.71, start: 0.000000, bitrate: 9142 kb/s Stream #0.0(eng): Video: h264 (Constrained Baseline), yuv420p, 1280x720 [PAR 1:1 DAR 16:9], 9007 kb/s, 29.97 fps, 29.97 tbr, 30k tbn, 59.94 tbc Metadata: creation_time : 2012-09-29 09:05:50 Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, s16, 127 kb/s Metadata: creation_time : 2012-09-29 09:05:50 File 'SANY0069A.MP4' already exists. Overwrite ? [y/N] y Output #0, mp4, to 'SANY0069A.MP4': Metadata: major_brand : mp42 minor_version : 1 compatible_brands: mp42avc1 creation_time : 2012-09-29 09:05:50 comment : SANYO DIGITAL CAMERA CA9 comment-eng : SANYO DIGITAL CAMERA CA9 encoder : Lavf53.5.0 Stream #0.0(eng): Video: libx264, yuv420p, 1280x720 [PAR 1:1 DAR 16:9], q=2-31, 9007 kb/s, 30k tbn, 29.97 tbc Metadata: creation_time : 2012-09-29 09:05:50 Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, 127 kb/s Metadata: creation_time : 2012-09-29 09:05:50 Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 Press [q] to stop, [?] for help frame= 7773 fps=4644 q=-1.0 Lsize= 289607kB time=00:04:19.35 bitrate=9147.4kbits/s video:285416kB audio:4033kB global headers:0kB muxing overhead 0.054571% and finaly, when i compare the ffprobe of the original and the first split part i get the 2 following outputs: original ffprobe version 0.8.12, Copyright (c) 2007-2011 the FFmpeg developers built on Jun 13 2012 09:57:38 with gcc 4.6.3 20120306 (Red Hat 4.6.3-2) configuration: --prefix=/usr --bindir=/usr/bin --datadir=/usr/share/ffmpeg --incdir=/usr/include/ffmpeg --libdir=/usr/lib64 --mandir=/usr/share/man --arch=x86_64 --extra-cflags='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic' --enable-bzlib --enable-libcelt --enable-libdc1394 --enable-libdirac --enable-libfreetype --enable-libgsm --enable-libmp3lame --enable-libopenjpeg --enable-librtmp --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxvid --enable-x11grab --enable-avfilter --enable-postproc --enable-pthreads --disable-static --enable-shared --enable-gpl --disable-debug --disable-stripping --shlibdir=/usr/lib64 --enable-runtime-cpudetect libavutil 51. 9. 1 / 51. 9. 1 libavcodec 53. 8. 0 / 53. 8. 0 libavformat 53. 5. 0 / 53. 5. 0 libavdevice 53. 1. 1 / 53. 1. 1 libavfilter 2. 23. 0 / 2. 23. 0 libswscale 2. 0. 0 / 2. 0. 0 libpostproc 51. 2. 0 / 51. 2. 0 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'SANY0069.MP4': Metadata: major_brand : mp42 minor_version : 1 compatible_brands: mp42avc1 creation_time : 2012-09-29 09:05:50 comment : SANYO DIGITAL CAMERA CA9 comment-eng : SANYO DIGITAL CAMERA CA9 Duration: 00:08:38.71, start: 0.000000, bitrate: 9142 kb/s Stream #0.0(eng): Video: h264 (Constrained Baseline), yuv420p, 1280x720 [PAR 1:1 DAR 16:9], 9007 kb/s, 29.97 fps, 29.97 tbr, 30k tbn, 59.94 tbc Metadata: creation_time : 2012-09-29 09:05:50 Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, s16, 127 kb/s Metadata: creation_time : 2012-09-29 09:05:50 Split ffprobe version 0.8.12, Copyright (c) 2007-2011 the FFmpeg developers built on Jun 13 2012 09:57:38 with gcc 4.6.3 20120306 (Red Hat 4.6.3-2) configuration: --prefix=/usr --bindir=/usr/bin --datadir=/usr/share/ffmpeg --incdir=/usr/include/ffmpeg --libdir=/usr/lib64 --mandir=/usr/share/man --arch=x86_64 --extra-cflags='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic' --enable-bzlib --enable-libcelt --enable-libdc1394 --enable-libdirac --enable-libfreetype --enable-libgsm --enable-libmp3lame --enable-libopenjpeg --enable-librtmp --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxvid --enable-x11grab --enable-avfilter --enable-postproc --enable-pthreads --disable-static --enable-shared --enable-gpl --disable-debug --disable-stripping --shlibdir=/usr/lib64 --enable-runtime-cpudetect libavutil 51. 9. 1 / 51. 9. 1 libavcodec 53. 8. 0 / 53. 8. 0 libavformat 53. 5. 0 / 53. 5. 0 libavdevice 53. 1. 1 / 53. 1. 1 libavfilter 2. 23. 0 / 2. 23. 0 libswscale 2. 0. 0 / 2. 0. 0 libpostproc 51. 2. 0 / 51. 2. 0 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'SANY0069A.MP4': Metadata: major_brand : isom minor_version : 512 compatible_brands: isomiso2avc1mp41 creation_time : 1970-01-01 00:00:00 encoder : Lavf53.5.0 comment : SANYO DIGITAL CAMERA CA9 Duration: 00:04:19.37, start: 0.000000, bitrate: 9146 kb/s Stream #0.0(eng): Video: h264 (Constrained Baseline), yuv420p, 1280x720 [PAR 1:1 DAR 16:9], 9015 kb/s, 29.97 fps, 29.97 tbr, 30k tbn, 59.94 tbc Metadata: creation_time : 1970-01-01 00:00:00 Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, s16, 127 kb/s Metadata: creation_time : 1970-01-01 00:00:00 I know this is incredibly long but its actually a quite simple question. I thought it would be best to provide as much detail as possible. any advice here would be great, Thanks

    Read the article

  • How to enable remote desktop view in windows 7 ?

    - by Ravi shankar
    Hi, I am trying to connect to a tight VNC server for remote desktop view. Its working fine when VNC server is running in XP PC but I am not able to connect remotly when VNC server is running in windows 7 PC. I am also able to connect to localhost in windows 7. I have turn off windows fire wall and other anti virus.

    Read the article

  • Can I prevent logon wallpaper from being changed when changing Windows theme?

    - by eidylon
    Hello all; I use TweaksLogon to change the logon wallpaper on my Win7x64 Ultimate system. However if I change my windows theme, it resets the logon wallpaper back to the default. Is there any way this can be prevented so that it will keep my chosen logon wall when changing the windows theme? I've tried both the programs at this question: http://superuser.com/questions/113817/customize-logon-or-welcome-screen-in-windows-7

    Read the article

  • How to take a call without forwarding it

    - by ageis23
    Hi I have a traditional telephony system at home. I also got an voip ATA device connected to the telephone socket. On a normal phone you can just plug it into the wall socket then multiple people on different phones can speak a the same time. Currently for me to take this call whoever answered the call will forward it onto my internal number. Is there not a way I can make it work like the analogue system so I can just pick up the phone?

    Read the article

  • Creating a network link between 2 very close buildings

    - by Daniel Johnson
    I have a charity who have two adjacent medium sized modern detached houses (in the UK): the buildings stand next to each other and are less than 5 metres apart. They have DSL connected to a single computer in one of the buildings. They want to add a network with wireless, and want it to work across both buildings. Being a charity they need to keep costs down. The network would be used for sharing Word documents, e-mail, browsing and skyping. My initial thoughts were to connect the buildings with fibre. So: Option 1 Use fibre between the buildings. Sufficient cable and two TP-LINK MC100CM Fast Ethernet Media Converters. Cost ~£80.00. But there is the extra cost and hassle of running the cable down and up the external walls, lifting and relaying paving, and burying underground. Never having fitted fibre I'm also a little worried about going up the wall and then bending the cable at 90 degrees to go through the wall and into the building. Option 2 Use two TP-Link TL-WA7510N High Powered Outdoor 5Ghz 15dBi Wireless antennas to connect the buildings. There is a clear line of sight at first floor level. Cost ~£100. And much easier to fit than fibre! Is using the TL-WA7510Ns overkill? Is there something more suitable? I had hoped to use some Netgear stuff, e.g. two DGN2200, one in each house and also use them to provide the wireless link between the buildings. However, in bridge mode wireless client association is not available and repeater mode with client association only supports WEP security which isn't strong enough. Is there something similar that would be up to the job? Option 3 Connect the buildings with UTP cable. My concerns here are risk of electric shock due to a difference of potential between the buildings (or are they so close this shouldn't be an issue) and protection from lightning strikes. Is fitting lighting arrestors expensive? And what can be done to ameliorate against the risk of shock? This all falls outside my area of expertise so I would really appreciate some advice.

    Read the article

  • anti-static foam under a motherboard?

    - by user29734
    I am modding out a custom built case/system. I have my motherboard mounted on a metal tray, (Dell did this) has been working great. Not I am modding the case to hold everything and how I want to mount the motherboard on the tray I have a slight gap between the wall of the case and the motherboard/tray. Can I put a piece of thin anti-static foam/packaging in between the tray and the case? That is safe right?

    Read the article

  • Website Reference about Server Placement

    - by Manuel Faux
    I have to do a student research project about "Server Placement in a Server Room". The paper should contain something like "place the racks about 3 meters away from any wall", "mind the maximum capacity load of the (false) floor" and other placement strategies. I have been searching for a while, but I did not find any reliable reference I can use in my work. Does anyone know some useful websites about server placement?

    Read the article

  • Is there a way to detect which port on an ethernet switch a device is connected to?

    - by banno
    Since the wall jack is typically always connected to the same port on the switch I would like to be able to know which device is connected at a specific location. In my case I am talking about printers. I have code to go out on the network and find the IP Address of all of my printers, but would like to be able to update a server based on a printer being swapped out of a location for maintenance or repair. Is there a method for determining a port connection?

    Read the article

  • Why is my concurrency capacity so low for my web app on a LAMP EC2 instance?

    - by AMF
    I come from a web developer background and have been humming along building my PHP app, using the CakePHP framework. The problem arose when I began the ab (Apache Bench) testing on the Amazon EC2 instance in which the app resides. I'm getting pretty horrendous average page load times, even though I'm running a c1.medium instance (2 cores, 2GB RAM), and I think I'm doing everything right. I would run: ab -n 200 -c 20 http://localhost/heavy-but-view-cached-page.php Here are the results: Concurrency Level: 20 Time taken for tests: 48.197 seconds Complete requests: 200 Failed requests: 0 Write errors: 0 Total transferred: 392111200 bytes HTML transferred: 392047600 bytes Requests per second: 4.15 [#/sec] (mean) Time per request: 4819.723 [ms] (mean) Time per request: 240.986 [ms] (mean, across all concurrent requests) Transfer rate: 7944.88 [Kbytes/sec] received While the ab test is running, I run VMStat, which shows that Swap stays at 0, CPU is constantly at 80-100% (although I'm not sure I can trust this on a VM), RAM utilization ramps up to about 1.6G (leaving 400M free). Load goes up to about 8 and site slows to a crawl. Here's what I think I'm doing right on the code side: In Chrome browser uncached pages typically load in 800-1000ms, and cached pages load in 300-500ms. Not stunning, but not terrible either. Thanks to view caching, there might be at most one DB query per page-load to write session data. So we can rule out a DB bottleneck. I have APC on. I am using Memcached to serve the view cache and other site caches. xhprof code profiler shows that cached pages take up 10MB-40MB in memory and 100ms - 1000ms in wall time. Pages that would be the worst offenders would look something like this in xhprof: Total Incl. Wall Time (microsec): 330,143 microsecs Total Incl. CPU (microsecs): 320,019 microsecs Total Incl. MemUse (bytes): 36,786,192 bytes Total Incl. PeakMemUse (bytes): 46,667,008 bytes Number of Function Calls: 5,195 My Apache config: KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 3 <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 120 MaxRequestsPerChild 1000 </IfModule> Is there something wrong with the server? Some gotcha with the EC2? Or is it my code? Some obvious setting I should look into? Too many DNS lookups? What am I missing? I really want to get to 1,000 concurrency capacity, but at this rate, it ain't gonna happen.

    Read the article

  • Agile Development

    - by James Oloo Onyango
    Alot of literature has and is being written about agile developement and its surrounding philosophies. In my quest to find the best way to express the importance of agile methodologies, i have found Robert C. Martin's "A Satire Of Two Companies" to be both the most concise and thorough! Enjoy the read! Rufus Inc Project Kick Off Your name is Bob. The date is January 3, 2001, and your head still aches from the recent millennial revelry. You are sitting in a conference room with several managers and a group of your peers. You are a project team leader. Your boss is there, and he has brought along all of his team leaders. His boss called the meeting. "We have a new project to develop," says your boss's boss. Call him BB. The points in his hair are so long that they scrape the ceiling. Your boss's points are just starting to grow, but he eagerly awaits the day when he can leave Brylcream stains on the acoustic tiles. BB describes the essence of the new market they have identified and the product they want to develop to exploit this market. "We must have this new project up and working by fourth quarter October 1," BB demands. "Nothing is of higher priority, so we are cancelling your current project." The reaction in the room is stunned silence. Months of work are simply going to be thrown away. Slowly, a murmur of objection begins to circulate around the conference table.   His points give off an evil green glow as BB meets the eyes of everyone in the room. One by one, that insidious stare reduces each attendee to quivering lumps of protoplasm. It is clear that he will brook no discussion on this matter. Once silence has been restored, BB says, "We need to begin immediately. How long will it take you to do the analysis?" You raise your hand. Your boss tries to stop you, but his spitwad misses you and you are unaware of his efforts.   "Sir, we can't tell you how long the analysis will take until we have some requirements." "The requirements document won't be ready for 3 or 4 weeks," BB says, his points vibrating with frustration. "So, pretend that you have the requirements in front of you now. How long will you require for analysis?" No one breathes. Everyone looks around to see whether anyone has some idea. "If analysis goes beyond April 1, we have a problem. Can you finish the analysis by then?" Your boss visibly gathers his courage: "We'll find a way, sir!" His points grow 3 mm, and your headache increases by two Tylenol. "Good." BB smiles. "Now, how long will it take to do the design?" "Sir," you say. Your boss visibly pales. He is clearly worried that his 3 mms are at risk. "Without an analysis, it will not be possible to tell you how long design will take." BB's expression shifts beyond austere.   "PRETEND you have the analysis already!" he says, while fixing you with his vacant, beady little eyes. "How long will it take you to do the design?" Two Tylenol are not going to cut it. Your boss, in a desperate attempt to save his new growth, babbles: "Well, sir, with only six months left to complete the project, design had better take no longer than 3 months."   "I'm glad you agree, Smithers!" BB says, beaming. Your boss relaxes. He knows his points are secure. After a while, he starts lightly humming the Brylcream jingle. BB continues, "So, analysis will be complete by April 1, design will be complete by July 1, and that gives you 3 months to implement the project. This meeting is an example of how well our new consensus and empowerment policies are working. Now, get out there and start working. I'll expect to see TQM plans and QIT assignments on my desk by next week. Oh, and don't forget that your crossfunctional team meetings and reports will be needed for next month's quality audit." "Forget the Tylenol," you think to yourself as you return to your cubicle. "I need bourbon."   Visibly excited, your boss comes over to you and says, "Gosh, what a great meeting. I think we're really going to do some world shaking with this project." You nod in agreement, too disgusted to do anything else. "Oh," your boss continues, "I almost forgot." He hands you a 30-page document. "Remember that the SEI is coming to do an evaluation next week. This is the evaluation guide. You need to read through it, memorize it, and then shred it. It tells you how to answer any questions that the SEI auditors ask you. It also tells you what parts of the building you are allowed to take them to and what parts to avoid. We are determined to be a CMM level 3 organization by June!"   You and your peers start working on the analysis of the new project. This is difficult because you have no requirements. But from the 10-minute introduction given by BB on that fateful morning, you have some idea of what the product is supposed to do.   Corporate process demands that you begin by creating a use case document. You and your team begin enumerating use cases and drawing oval and stick diagrams. Philosophical debates break out among the team members. There is disagreement as to whether certain use cases should be connected with <<extends>> or <<includes>> relationships. Competing models are created, but nobody knows how to evaluate them. The debate continues, effectively paralyzing progress.   After a week, somebody finds the iceberg.com Web site, which recommends disposing entirely of <<extends>> and <<includes>> and replacing them with <<precedes>> and <<uses>>. The documents on this Web site, authored by Don Sengroiux, describes a method known as stalwart-analysis, which claims to be a step-by-step method for translating use cases into design diagrams. More competing use case models are created using this new scheme, but again, people can't agree on how to evaluate them. The thrashing continues. More and more, the use case meetings are driven by emotion rather than by reason. If it weren't for the fact that you don't have requirements, you'd be pretty upset by the lack of progress you are making. The requirements document arrives on February 15. And then again on February 20, 25, and every week thereafter. Each new version contradicts the previous one. Clearly, the marketing folks who are writing the requirements, empowered though they might be, are not finding consensus.   At the same time, several new competing use case templates have been proposed by the various team members. Each template presents its own particularly creative way of delaying progress. The debates rage on. On March 1, Prudence Putrigence, the process proctor, succeeds in integrating all the competing use case forms and templates into a single, all-encompassing form. Just the blank form is 15 pages long. She has managed to include every field that appeared on all the competing templates. She also presents a 159- page document describing how to fill out the use case form. All current use cases must be rewritten according to the new standard.   You marvel to yourself that it now requires 15 pages of fill-in-the-blank and essay questions to answer the question: What should the system do when the user presses Return? The corporate process (authored by L. E. Ott, famed author of "Holistic Analysis: A Progressive Dialectic for Software Engineers") insists that you discover all primary use cases, 87 percent of all secondary use cases, and 36.274 percent of all tertiary use cases before you can complete analysis and enter the design phase. You have no idea what a tertiary use case is. So in an attempt to meet this requirement, you try to get your use case document reviewed by the marketing department, which you hope will know what a tertiary use case is.   Unfortunately, the marketing folks are too busy with sales support to talk to you. Indeed, since the project started, you have not been able to get a single meeting with marketing, which has provided a never-ending stream of changing and contradictory requirements documents.   While one team has been spinning endlessly on the use case document, another team has been working out the domain model. Endless variations of UML documents are pouring out of this team. Every week, the model is reworked.   The team members can't decide whether to use <<interfaces>> or <<types>> in the model. A huge disagreement has been raging on the proper syntax and application of OCL. Others on the team just got back from a 5-day class on catabolism, and have been producing incredibly detailed and arcane diagrams that nobody else can fathom.   On March 27, with one week to go before analysis is to be complete, you have produced a sea of documents and diagrams but are no closer to a cogent analysis of the problem than you were on January 3. **** And then, a miracle happens.   **** On Saturday, April 1, you check your e-mail from home. You see a memo from your boss to BB. It states unequivocally that you are done with the analysis! You phone your boss and complain. "How could you have told BB that we were done with the analysis?" "Have you looked at a calendar lately?" he responds. "It's April 1!" The irony of that date does not escape you. "But we have so much more to think about. So much more to analyze! We haven't even decided whether to use <<extends>> or <<precedes>>!" "Where is your evidence that you are not done?" inquires your boss, impatiently. "Whaaa . . . ." But he cuts you off. "Analysis can go on forever; it has to be stopped at some point. And since this is the date it was scheduled to stop, it has been stopped. Now, on Monday, I want you to gather up all existing analysis materials and put them into a public folder. Release that folder to Prudence so that she can log it in the CM system by Monday afternoon. Then get busy and start designing."   As you hang up the phone, you begin to consider the benefits of keeping a bottle of bourbon in your bottom desk drawer. They threw a party to celebrate the on-time completion of the analysis phase. BB gave a colon-stirring speech on empowerment. And your boss, another 3 mm taller, congratulated his team on the incredible show of unity and teamwork. Finally, the CIO takes the stage to tell everyone that the SEI audit went very well and to thank everyone for studying and shredding the evaluation guides that were passed out. Level 3 now seems assured and will be awarded by June. (Scuttlebutt has it that managers at the level of BB and above are to receive significant bonuses once the SEI awards level 3.)   As the weeks flow by, you and your team work on the design of the system. Of course, you find that the analysis that the design is supposedly based on is flawedno, useless; no, worse than useless. But when you tell your boss that you need to go back and work some more on the analysis to shore up its weaker sections, he simply states, "The analysis phase is over. The only allowable activity is design. Now get back to it."   So, you and your team hack the design as best you can, unsure of whether the requirements have been properly analyzed. Of course, it really doesn't matter much, since the requirements document is still thrashing with weekly revisions, and the marketing department still refuses to meet with you.     The design is a nightmare. Your boss recently misread a book named The Finish Line in which the author, Mark DeThomaso, blithely suggested that design documents should be taken down to code-level detail. "If we are going to be working at that level of detail," you ask, "why don't we simply write the code instead?" "Because then you wouldn't be designing, of course. And the only allowable activity in the design phase is design!" "Besides," he continues, "we have just purchased a companywide license for Dandelion! This tool enables 'Round the Horn Engineering!' You are to transfer all design diagrams into this tool. It will automatically generate our code for us! It will also keep the design diagrams in sync with the code!" Your boss hands you a brightly colored shrinkwrapped box containing the Dandelion distribution. You accept it numbly and shuffle off to your cubicle. Twelve hours, eight crashes, one disk reformatting, and eight shots of 151 later, you finally have the tool installed on your server. You consider the week your team will lose while attending Dandelion training. Then you smile and think, "Any week I'm not here is a good week." Design diagram after design diagram is created by your team. Dandelion makes it very difficult to draw these diagrams. There are dozens and dozens of deeply nested dialog boxes with funny text fields and check boxes that must all be filled in correctly. And then there's the problem of moving classes between packages. At first, these diagram are driven from the use cases. But the requirements are changing so often that the use cases rapidly become meaningless. Debates rage about whether VISITOR or DECORATOR design patterns should be used. One developer refuses to use VISITOR in any form, claiming that it's not a properly object-oriented construct. Someone refuses to use multiple inheritance, since it is the spawn of the devil. Review meetings rapidly degenerate into debates about the meaning of object orientation, the definition of analysis versus design, or when to use aggregation versus association. Midway through the design cycle, the marketing folks announce that they have rethought the focus of the system. Their new requirements document is completely restructured. They have eliminated several major feature areas and replaced them with feature areas that they anticipate customer surveys will show to be more appropriate. You tell your boss that these changes mean that you need to reanalyze and redesign much of the system. But he says, "The analysis phase is system. But he says, "The analysis phase is over. The only allowable activity is design. Now get back to it."   You suggest that it might be better to create a simple prototype to show to the marketing folks and even some potential customers. But your boss says, "The analysis phase is over. The only allowable activity is design. Now get back to it." Hack, hack, hack, hack. You try to create some kind of a design document that might reflect the new requirements documents. However, the revolution of the requirements has not caused them to stop thrashing. Indeed, if anything, the wild oscillations of the requirements document have only increased in frequency and amplitude.   You slog your way through them.   On June 15, the Dandelion database gets corrupted. Apparently, the corruption has been progressive. Small errors in the DB accumulated over the months into bigger and bigger errors. Eventually, the CASE tool just stopped working. Of course, the slowly encroaching corruption is present on all the backups. Calls to the Dandelion technical support line go unanswered for several days. Finally, you receive a brief e-mail from Dandelion, informing you that this is a known problem and that the solution is to purchase the new version, which they promise will be ready some time next quarter, and then reenter all the diagrams by hand.   ****   Then, on July 1 another miracle happens! You are done with the design!   Rather than go to your boss and complain, you stock your middle desk drawer with some vodka.   **** They threw a party to celebrate the on-time completion of the design phase and their graduation to CMM level 3. This time, you find BB's speech so stirring that you have to use the restroom before it begins. New banners and plaques are all over your workplace. They show pictures of eagles and mountain climbers, and they talk about teamwork and empowerment. They read better after a few scotches. That reminds you that you need to clear out your file cabinet to make room for the brandy. You and your team begin to code. But you rapidly discover that the design is lacking in some significant areas. Actually, it's lacking any significance at all. You convene a design session in one of the conference rooms to try to work through some of the nastier problems. But your boss catches you at it and disbands the meeting, saying, "The design phase is over. The only allowable activity is coding. Now get back to it."   ****   The code generated by Dandelion is really hideous. It turns out that you and your team were using association and aggregation the wrong way, after all. All the generated code has to be edited to correct these flaws. Editing this code is extremely difficult because it has been instrumented with ugly comment blocks that have special syntax that Dandelion needs in order to keep the diagrams in sync with the code. If you accidentally alter one of these comments, the diagrams will be regenerated incorrectly. It turns out that "Round the Horn Engineering" requires an awful lot of effort. The more you try to keep the code compatible with Dandelion, the more errors Dandelion generates. In the end, you give up and decide to keep the diagrams up to date manually. A second later, you decide that there's no point in keeping the diagrams up to date at all. Besides, who has time?   Your boss hires a consultant to build tools to count the number of lines of code that are being produced. He puts a big thermometer graph on the wall with the number 1,000,000 on the top. Every day, he extends the red line to show how many lines have been added. Three days after the thermometer appears on the wall, your boss stops you in the hall. "That graph isn't growing quickly enough. We need to have a million lines done by October 1." "We aren't even sh-sh-sure that the proshect will require a m-million linezh," you blather. "We have to have a million lines done by October 1," your boss reiterates. His points have grown again, and the Grecian formula he uses on them creates an aura of authority and competence. "Are you sure your comment blocks are big enough?" Then, in a flash of managerial insight, he says, "I have it! I want you to institute a new policy among the engineers. No line of code is to be longer than 20 characters. Any such line must be split into two or more preferably more. All existing code needs to be reworked to this standard. That'll get our line count up!"   You decide not to tell him that this will require two unscheduled work months. You decide not to tell him anything at all. You decide that intravenous injections of pure ethanol are the only solution. You make the appropriate arrangements. Hack, hack, hack, and hack. You and your team madly code away. By August 1, your boss, frowning at the thermometer on the wall, institutes a mandatory 50-hour workweek.   Hack, hack, hack, and hack. By September 1st, the thermometer is at 1.2 million lines and your boss asks you to write a report describing why you exceeded the coding budget by 20 percent. He institutes mandatory Saturdays and demands that the project be brought back down to a million lines. You start a campaign of remerging lines. Hack, hack, hack, and hack. Tempers are flaring; people are quitting; QA is raining trouble reports down on you. Customers are demanding installation and user manuals; salespeople are demanding advance demonstrations for special customers; the requirements document is still thrashing, the marketing folks are complaining that the product isn't anything like they specified, and the liquor store won't accept your credit card anymore. Something has to give.    On September 15, BB calls a meeting. As he enters the room, his points are emitting clouds of steam. When he speaks, the bass overtones of his carefully manicured voice cause the pit of your stomach to roll over. "The QA manager has told me that this project has less than 50 percent of the required features implemented. He has also informed me that the system crashes all the time, yields wrong results, and is hideously slow. He has also complained that he cannot keep up with the continuous train of daily releases, each more buggy than the last!" He stops for a few seconds, visibly trying to compose himself. "The QA manager estimates that, at this rate of development, we won't be able to ship the product until December!" Actually, you think it's more like March, but you don't say anything. "December!" BB roars with such derision that people duck their heads as though he were pointing an assault rifle at them. "December is absolutely out of the question. Team leaders, I want new estimates on my desk in the morning. I am hereby mandating 65-hour work weeks until this project is complete. And it better be complete by November 1."   As he leaves the conference room, he is heard to mutter: "Empowermentbah!" * * * Your boss is bald; his points are mounted on BB's wall. The fluorescent lights reflecting off his pate momentarily dazzle you. "Do you have anything to drink?" he asks. Having just finished your last bottle of Boone's Farm, you pull a bottle of Thunderbird from your bookshelf and pour it into his coffee mug. "What's it going to take to get this project done? " he asks. "We need to freeze the requirements, analyze them, design them, and then implement them," you say callously. "By November 1?" your boss exclaims incredulously. "No way! Just get back to coding the damned thing." He storms out, scratching his vacant head.   A few days later, you find that your boss has been transferred to the corporate research division. Turnover has skyrocketed. Customers, informed at the last minute that their orders cannot be fulfilled on time, have begun to cancel their orders. Marketing is re-evaluating whether this product aligns with the overall goals of the company. Memos fly, heads roll, policies change, and things are, overall, pretty grim. Finally, by March, after far too many sixty-five hour weeks, a very shaky version of the software is ready. In the field, bug-discovery rates are high, and the technical support staff are at their wits' end, trying to cope with the complaints and demands of the irate customers. Nobody is happy.   In April, BB decides to buy his way out of the problem by licensing a product produced by Rupert Industries and redistributing it. The customers are mollified, the marketing folks are smug, and you are laid off.     Rupert Industries: Project Alpha   Your name is Robert. The date is January 3, 2001. The quiet hours spent with your family this holiday have left you refreshed and ready for work. You are sitting in a conference room with your team of professionals. The manager of the division called the meeting. "We have some ideas for a new project," says the division manager. Call him Russ. He is a high-strung British chap with more energy than a fusion reactor. He is ambitious and driven but understands the value of a team. Russ describes the essence of the new market opportunity the company has identified and introduces you to Jane, the marketing manager, who is responsible for defining the products that will address it. Addressing you, Jane says, "We'd like to start defining our first product offering as soon as possible. When can you and your team meet with me?" You reply, "We'll be done with the current iteration of our project this Friday. We can spare a few hours for you between now and then. After that, we'll take a few people from the team and dedicate them to you. We'll begin hiring their replacements and the new people for your team immediately." "Great," says Russ, "but I want you to understand that it is critical that we have something to exhibit at the trade show coming up this July. If we can't be there with something significant, we'll lose the opportunity."   "I understand," you reply. "I don't yet know what it is that you have in mind, but I'm sure we can have something by July. I just can't tell you what that something will be right now. In any case, you and Jane are going to have complete control over what we developers do, so you can rest assured that by July, you'll have the most important things that can be accomplished in that time ready to exhibit."   Russ nods in satisfaction. He knows how this works. Your team has always kept him advised and allowed him to steer their development. He has the utmost confidence that your team will work on the most important things first and will produce a high-quality product.   * * *   "So, Robert," says Jane at their first meeting, "How does your team feel about being split up?" "We'll miss working with each other," you answer, "but some of us were getting pretty tired of that last project and are looking forward to a change. So, what are you people cooking up?" Jane beams. "You know how much trouble our customers currently have . . ." And she spends a half hour or so describing the problem and possible solution. "OK, wait a second" you respond. "I need to be clear about this." And so you and Jane talk about how this system might work. Some of her ideas aren't fully formed. You suggest possible solutions. She likes some of them. You continue discussing.   During the discussion, as each new topic is addressed, Jane writes user story cards. Each card represents something that the new system has to do. The cards accumulate on the table and are spread out in front of you. Both you and Jane point at them, pick them up, and make notes on them as you discuss the stories. The cards are powerful mnemonic devices that you can use to represent complex ideas that are barely formed.   At the end of the meeting, you say, "OK, I've got a general idea of what you want. I'm going to talk to the team about it. I imagine they'll want to run some experiments with various database structures and presentation formats. Next time we meet, it'll be as a group, and we'll start identifying the most important features of the system."   A week later, your nascent team meets with Jane. They spread the existing user story cards out on the table and begin to get into some of the details of the system. The meeting is very dynamic. Jane presents the stories in the order of their importance. There is much discussion about each one. The developers are concerned about keeping the stories small enough to estimate and test. So they continually ask Jane to split one story into several smaller stories. Jane is concerned that each story have a clear business value and priority, so as she splits them, she makes sure that this stays true.   The stories accumulate on the table. Jane writes them, but the developers make notes on them as needed. Nobody tries to capture everything that is said; the cards are not meant to capture everything but are simply reminders of the conversation.   As the developers become more comfortable with the stories, they begin writing estimates on them. These estimates are crude and budgetary, but they give Jane an idea of what the story will cost.   At the end of the meeting, it is clear that many more stories could be discussed. It is also clear that the most important stories have been addressed and that they represent several months worth of work. Jane closes the meeting by taking the cards with her and promising to have a proposal for the first release in the morning.   * * *   The next morning, you reconvene the meeting. Jane chooses five cards and places them on the table. "According to your estimates, these cards represent about one perfect team-week's worth of work. The last iteration of the previous project managed to get one perfect team-week done in 3 real weeks. If we can get these five stories done in 3 weeks, we'll be able to demonstrate them to Russ. That will make him feel very comfortable about our progress." Jane is pushing it. The sheepish look on her face lets you know that she knows it too. You reply, "Jane, this is a new team, working on a new project. It's a bit presumptuous to expect that our velocity will be the same as the previous team's. However, I met with the team yesterday afternoon, and we all agreed that our initial velocity should, in fact, be set to one perfectweek for every 3 real-weeks. So you've lucked out on this one." "Just remember," you continue, "that the story estimates and the story velocity are very tentative at this point. We'll learn more when we plan the iteration and even more when we implement it."   Jane looks over her glasses at you as if to say "Who's the boss around here, anyway?" and then smiles and says, "Yeah, don't worry. I know the drill by now."Jane then puts 15 more cards on the table. She says, "If we can get all these cards done by the end of March, we can turn the system over to our beta test customers. And we'll get good feedback from them."   You reply, "OK, so we've got our first iteration defined, and we have the stories for the next three iterations after that. These four iterations will make our first release."   "So," says Jane, can you really do these five stories in the next 3 weeks?" "I don't know for sure, Jane," you reply. "Let's break them down into tasks and see what we get."   So Jane, you, and your team spend the next several hours taking each of the five stories that Jane chose for the first iteration and breaking them down into small tasks. The developers quickly realize that some of the tasks can be shared between stories and that other tasks have commonalities that can probably be taken advantage of. It is clear that potential designs are popping into the developers' heads. From time to time, they form little discussion knots and scribble UML diagrams on some cards.   Soon, the whiteboard is filled with the tasks that, once completed, will implement the five stories for this iteration. You start the sign-up process by saying, "OK, let's sign up for these tasks." "I'll take the initial database generation." Says Pete. "That's what I did on the last project, and this doesn't look very different. I estimate it at two of my perfect workdays." "OK, well, then, I'll take the login screen," says Joe. "Aw, darn," says Elaine, the junior member of the team, "I've never done a GUI, and kinda wanted to try that one."   "Ah, the impatience of youth," Joe says sagely, with a wink in your direction. "You can assist me with it, young Jedi." To Jane: "I think it'll take me about three of my perfect workdays."   One by one, the developers sign up for tasks and estimate them in terms of their own perfect workdays. Both you and Jane know that it is best to let the developers volunteer for tasks than to assign the tasks to them. You also know full well that you daren't challenge any of the developers' estimates. You know these people, and you trust them. You know that they are going to do the very best they can.   The developers know that they can't sign up for more perfect workdays than they finished in the last iteration they worked on. Once each developer has filled his or her schedule for the iteration, they stop signing up for tasks.   Eventually, all the developers have stopped signing up for tasks. But, of course, tasks are still left on the board.   "I was worried that that might happen," you say, "OK, there's only one thing to do, Jane. We've got too much to do in this iteration. What stories or tasks can we remove?" Jane sighs. She knows that this is the only option. Working overtime at the beginning of a project is insane, and projects where she's tried it have not fared well.   So Jane starts to remove the least-important functionality. "Well, we really don't need the login screen just yet. We can simply start the system in the logged-in state." "Rats!" cries Elaine. "I really wanted to do that." "Patience, grasshopper." says Joe. "Those who wait for the bees to leave the hive will not have lips too swollen to relish the honey." Elaine looks confused. Everyone looks confused. "So . . .," Jane continues, "I think we can also do away with . . ." And so, bit by bit, the list of tasks shrinks. Developers who lose a task sign up for one of the remaining ones.   The negotiation is not painless. Several times, Jane exhibits obvious frustration and impatience. Once, when tensions are especially high, Elaine volunteers, "I'll work extra hard to make up some of the missing time." You are about to correct her when, fortunately, Joe looks her in the eye and says, "When once you proceed down the dark path, forever will it dominate your destiny."   In the end, an iteration acceptable to Jane is reached. It's not what Jane wanted. Indeed, it is significantly less. But it's something the team feels that can be achieved in the next 3 weeks.   And, after all, it still addresses the most important things that Jane wanted in the iteration. "So, Jane," you say when things had quieted down a bit, "when can we expect acceptance tests from you?" Jane sighs. This is the other side of the coin. For every story the development team implements,   Jane must supply a suite of acceptance tests that prove that it works. And the team needs these long before the end of the iteration, since they will certainly point out differences in the way Jane and the developers imagine the system's behaviour.   "I'll get you some example test scripts today," Jane promises. "I'll add to them every day after that. You'll have the entire suite by the middle of the iteration."   * * *   The iteration begins on Monday morning with a flurry of Class, Responsibilities, Collaborators sessions. By midmorning, all the developers have assembled into pairs and are rapidly coding away. "And now, my young apprentice," Joe says to Elaine, "you shall learn the mysteries of test-first design!"   "Wow, that sounds pretty rad," Elaine replies. "How do you do it?" Joe beams. It's clear that he has been anticipating this moment. "OK, what does the code do right now?" "Huh?" replied Elaine, "It doesn't do anything at all; there is no code."   "So, consider our task; can you think of something the code should do?" "Sure," Elaine said with youthful assurance, "First, it should connect to the database." "And thereupon, what must needs be required to connecteth the database?" "You sure talk weird," laughed Elaine. "I think we'd have to get the database object from some registry and call the Connect() method. "Ah, astute young wizard. Thou perceives correctly that we requireth an object within which we can cacheth the database object." "Is 'cacheth' really a word?" "It is when I say it! So, what test can we write that we know the database registry should pass?" Elaine sighs. She knows she'll just have to play along. "We should be able to create a database object and pass it to the registry in a Store() method. And then we should be able to pull it out of the registry with a Get() method and make sure it's the same object." "Oh, well said, my prepubescent sprite!" "Hay!" "So, now, let's write a test function that proves your case." "But shouldn't we write the database object and registry object first?" "Ah, you've much to learn, my young impatient one. Just write the test first." "But it won't even compile!" "Are you sure? What if it did?" "Uh . . ." "Just write the test, Elaine. Trust me." And so Joe, Elaine, and all the other developers began to code their tasks, one test case at a time. The room in which they worked was abuzz with the conversations between the pairs. The murmur was punctuated by an occasional high five when a pair managed to finish a task or a difficult test case.   As development proceeded, the developers changed partners once or twice a day. Each developer got to see what all the others were doing, and so knowledge of the code spread generally throughout the team.   Whenever a pair finished something significant whether a whole task or simply an important part of a task they integrated what they had with the rest of the system. Thus, the code base grew daily, and integration difficulties were minimized.   The developers communicated with Jane on a daily basis. They'd go to her whenever they had a question about the functionality of the system or the interpretation of an acceptance test case.   Jane, good as her word, supplied the team with a steady stream of acceptance test scripts. The team read these carefully and thereby gained a much better understanding of what Jane expected the system to do. By the beginning of the second week, there was enough functionality to demonstrate to Jane. She watched eagerly as the demonstration passed test case after test case. "This is really cool," Jane said as the demonstration finally ended. "But this doesn't seem like one-third of the tasks. Is your velocity slower than anticipated?"   You grimace. You'd been waiting for a good time to mention this to Jane but now she was forcing the issue. "Yes, unfortunately, we are going more slowly than we had expected. The new application server we are using is turning out to be a pain to configure. Also, it takes forever to reboot, and we have to reboot it whenever we make even the slightest change to its configuration."   Jane eyes you with suspicion. The stress of last Monday's negotiations had still not entirely dissipated. She says, "And what does this mean to our schedule? We can't slip it again, we just can't. Russ will have a fit! He'll haul us all into the woodshed and ream us some new ones."   You look Jane right in the eyes. There's no pleasant way to give someone news like this. So you just blurt out, "Look, if things keep going like they're going, we're not going to be done with everything by next Friday. Now it's possible that we'll figure out a way to go faster. But, frankly, I wouldn't depend on that. You should start thinking about one or two tasks that could be removed from the iteration without ruining the demonstration for Russ. Come hell or high water, we are going to give that demonstration on Friday, and I don't think you want us to choose which tasks to omit."   "Aw forchrisakes!" Jane barely manages to stifle yelling that last word as she stalks away, shaking her head. Not for the first time, you say to yourself, "Nobody ever promised me project management would be easy." You are pretty sure it won't be the last time, either.   Actually, things went a bit better than you had hoped. The team did, in fact, have to drop one task from the iteration, but Jane had chosen wisely, and the demonstration for Russ went without a hitch. Russ was not impressed with the progress, but neither was he dismayed. He simply said, "This is pretty good. But remember, we have to be able to demonstrate this system at the trade show in July, and at this rate, it doesn't look like you'll have all that much to show." Jane, whose attitude had improved dramatically with the completion of the iteration, responded to Russ by saying, "Russ, this team is working hard, and well. When July comes around, I am confident that we'll have something significant to demonstrate. It won't be everything, and some of it may be smoke and mirrors, but we'll have something."   Painful though the last iteration was, it had calibrated your velocity numbers. The next iteration went much better. Not because your team got more done than in the last iteration but simply because the team didn't have to remove any tasks or stories in the middle of the iteration.   By the start of the fourth iteration, a natural rhythm has been established. Jane, you, and the team know exactly what to expect from one another. The team is running hard, but the pace is sustainable. You are confident that the team can keep up this pace for a year or more.   The number of surprises in the schedule diminishes to near zero; however, the number of surprises in the requirements does not. Jane and Russ frequently look over the growing system and make recommendations or changes to the existing functionality. But all parties realize that these changes take time and must be scheduled. So the changes do not cause anyone's expectations to be violated. In March, there is a major demonstration of the system to the board of directors. The system is very limited and is not yet in a form good enough to take to the trade show, but progress is steady, and the board is reasonably impressed.   The second release goes even more smoothly than the first. By now, the team has figured out a way to automate Jane's acceptance test scripts. The team has also refactored the design of the system to the point that it is really easy to add new features and change old ones. The second release was done by the end of June and was taken to the trade show. It had less in it than Jane and Russ would have liked, but it did demonstrate the most important features of the system. Although customers at the trade show noticed that certain features were missing, they were very impressed overall. You, Russ, and Jane all returned from the trade show with smiles on your faces. You all felt as though this project was a winner.   Indeed, many months later, you are contacted by Rufus Inc. That company had been working on a system like this for its internal operations. Rufus has canceled the development of that system after a death-march project and is negotiating to license your technology for its environment.   Indeed, things are looking up!

    Read the article

  • How to merge two different Makefiles?

    - by martijnn2008
    I have did some reading on "Merging Makefiles", one suggest I should leave the two Makefiles separate in different folders [1]. For me this look counter intuitive, because I have the following situation: I have 3 source files (main.cpp flexibility.cpp constraints.cpp) one of them (flexibility.cpp) is making use of the COIN-OR Linear Programming library (Clp) When installing this library on my computer it makes sample Makefiles, which I have adjust the Makefile and it currently makes a good working binary. # Copyright (C) 2006 International Business Machines and others. # All Rights Reserved. # This file is distributed under the Eclipse Public License. # $Id: Makefile.in 726 2006-04-17 04:16:00Z andreasw $ ########################################################################## # You can modify this example makefile to fit for your own program. # # Usually, you only need to change the five CHANGEME entries below. # ########################################################################## # To compile other examples, either changed the following line, or # add the argument DRIVER=problem_name to make DRIVER = main # CHANGEME: This should be the name of your executable EXE = clp # CHANGEME: Here is the name of all object files corresponding to the source # code that you wrote in order to define the problem statement OBJS = $(DRIVER).o constraints.o flexibility.o # CHANGEME: Additional libraries ADDLIBS = # CHANGEME: Additional flags for compilation (e.g., include flags) ADDINCFLAGS = # CHANGEME: Directory to the sources for the (example) problem definition # files SRCDIR = . ########################################################################## # Usually, you don't have to change anything below. Note that if you # # change certain compiler options, you might have to recompile the # # COIN package. # ########################################################################## COIN_HAS_PKGCONFIG = TRUE COIN_CXX_IS_CL = #TRUE COIN_HAS_SAMPLE = TRUE COIN_HAS_NETLIB = #TRUE # C++ Compiler command CXX = g++ # C++ Compiler options CXXFLAGS = -O3 -pipe -DNDEBUG -pedantic-errors -Wparentheses -Wreturn-type -Wcast-qual -Wall -Wpointer-arith -Wwrite-strings -Wconversion -Wno-unknown-pragmas -Wno-long-long -DCLP_BUILD # additional C++ Compiler options for linking CXXLINKFLAGS = -Wl,--rpath -Wl,/home/martijn/Downloads/COIN/coin-Clp/lib # C Compiler command CC = gcc # C Compiler options CFLAGS = -O3 -pipe -DNDEBUG -pedantic-errors -Wimplicit -Wparentheses -Wsequence-point -Wreturn-type -Wcast-qual -Wall -Wno-unknown-pragmas -Wno-long-long -DCLP_BUILD # Sample data directory ifeq ($(COIN_HAS_SAMPLE), TRUE) ifeq ($(COIN_HAS_PKGCONFIG), TRUE) CXXFLAGS += -DSAMPLEDIR=\"`PKG_CONFIG_PATH=/home/martijn/Downloads/COIN/coin-Clp/lib64/pkgconfig:/home/martijn/Downloads/COIN/coin-Clp/lib/pkgconfig:/home/martijn/Downloads/COIN/coin-Clp/share/pkgconfig: pkg-config --variable=datadir coindatasample`\" CFLAGS += -DSAMPLEDIR=\"`PKG_CONFIG_PATH=/home/martijn/Downloads/COIN/coin-Clp/lib64/pkgconfig:/home/martijn/Downloads/COIN/coin-Clp/lib/pkgconfig:/home/martijn/Downloads/COIN/coin-Clp/share/pkgconfig: pkg-config --variable=datadir coindatasample`\" else CXXFLAGS += -DSAMPLEDIR=\"\" CFLAGS += -DSAMPLEDIR=\"\" endif endif # Netlib data directory ifeq ($(COIN_HAS_NETLIB), TRUE) ifeq ($(COIN_HAS_PKGCONFIG), TRUE) CXXFLAGS += -DNETLIBDIR=\"`PKG_CONFIG_PATH=/home/martijn/Downloads/COIN/coin-Clp/lib64/pkgconfig:/home/martijn/Downloads/COIN/coin-Clp/lib/pkgconfig:/home/martijn/Downloads/COIN/coin-Clp/share/pkgconfig: pkg-config --variable=datadir coindatanetlib`\" CFLAGS += -DNETLIBDIR=\"`PKG_CONFIG_PATH=/home/martijn/Downloads/COIN/coin-Clp/lib64/pkgconfig:/home/martijn/Downloads/COIN/coin-Clp/lib/pkgconfig:/home/martijn/Downloads/COIN/coin-Clp/share/pkgconfig: pkg-config --variable=datadir coindatanetlib`\" else CXXFLAGS += -DNETLIBDIR=\"\" CFLAGS += -DNETLIBDIR=\"\" endif endif # Include directories (we use the CYGPATH_W variables to allow compilation with Windows compilers) ifeq ($(COIN_HAS_PKGCONFIG), TRUE) INCL = `PKG_CONFIG_PATH=/home/martijn/Downloads/COIN/coin-Clp/lib64/pkgconfig:/home/martijn/Downloads/COIN/coin-Clp/lib/pkgconfig:/home/martijn/Downloads/COIN/coin-Clp/share/pkgconfig: pkg-config --cflags clp` else INCL = endif INCL += $(ADDINCFLAGS) # Linker flags ifeq ($(COIN_HAS_PKGCONFIG), TRUE) LIBS = `PKG_CONFIG_PATH=/home/martijn/Downloads/COIN/coin-Clp/lib64/pkgconfig:/home/martijn/Downloads/COIN/coin-Clp/lib/pkgconfig:/home/martijn/Downloads/COIN/coin-Clp/share/pkgconfig: pkg-config --libs clp` else ifeq ($(COIN_CXX_IS_CL), TRUE) LIBS = -link -libpath:`$(CYGPATH_W) /home/martijn/Downloads/COIN/coin-Clp/lib` libClp.lib else LIBS = -L/home/martijn/Downloads/COIN/coin-Clp/lib -lClp endif endif # The following is necessary under cygwin, if native compilers are used CYGPATH_W = echo # Here we list all possible generated objects or executables to delete them CLEANFILES = clp \ main.o \ flexibility.o \ constraints.o \ all: $(EXE) .SUFFIXES: .cpp .c .o .obj $(EXE): $(OBJS) bla=;\ for file in $(OBJS); do bla="$$bla `$(CYGPATH_W) $$file`"; done; \ $(CXX) $(CXXLINKFLAGS) $(CXXFLAGS) -o $@ $$bla $(LIBS) $(ADDLIBS) clean: rm -rf $(CLEANFILES) .cpp.o: $(CXX) $(CXXFLAGS) $(INCL) -c -o $@ `test -f '$<' || echo '$(SRCDIR)/'`$< .cpp.obj: $(CXX) $(CXXFLAGS) $(INCL) -c -o $@ `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(SRCDIR)/$<'; fi` .c.o: $(CC) $(CFLAGS) $(INCL) -c -o $@ `test -f '$<' || echo '$(SRCDIR)/'`$< .c.obj: $(CC) $(CFLAGS) $(INCL) -c -o $@ `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(SRCDIR)/$<'; fi` The other Makefile compiles a lot of code and makes use of bison and flex. This one is also made by someone else. I am able to alter this Makefile when I want to add some code. This Makefile also makes a binary. CFLAGS=-Wall LDLIBS=-LC:/GnuWin32/lib -lfl -lm LSOURCES=lex.l YSOURCES=grammar.ypp CSOURCES=debug.cpp esta_plus.cpp heap.cpp main.cpp stjn.cpp timing.cpp tmsp.cpp token.cpp chaining.cpp flexibility.cpp exceptions.cpp HSOURCES=$(CSOURCES:.cpp=.h) includes.h OBJECTS=$(LSOURCES:.l=.o) $(YSOURCES:.ypp=.tab.o) $(CSOURCES:.cpp=.o) all: solver solver: CFLAGS+=-g -O0 -DDEBUG solver: $(OBJECTS) main.o debug.o g++ $(CFLAGS) -o $@ $^ $(LDLIBS) solver.release: CFLAGS+=-O5 solver.release: $(OBJECTS) main.o g++ $(CFLAGS) -o $@ $^ $(LDLIBS) %.o: %.cpp g++ -c $(CFLAGS) -o $@ $< lex.cpp: lex.l grammar.tab.cpp grammar.tab.hpp flex -o$@ $< %.tab.cpp %.tab.hpp: %.ypp bison --verbose -d $< ifneq ($(LSOURCES),) $(LSOURCES:.l=.cpp): $(YSOURCES:.y=.tab.h) endif -include $(OBJECTS:.o=.d) clean: rm -f $(OBJECTS) $(OBJECTS:.o=.d) $(YSOURCES:.ypp=.tab.cpp) $(YSOURCES:.ypp=.tab.hpp) $(YSOURCES:.ypp=.output) $(LSOURCES:.l=.cpp) solver solver.release 2>/dev/null .PHONY: all clean debug release Both of these Makefiles are, for me, hard to understand. I don't know what they exactly do. What I want is to merge the two of them so I get only one binary. The code compiled in the second Makefile should be the result. I want to add flexibility.cpp and constraints.cpp to the second Makefile, but when I do. I get the problem following problem: flexibility.h:4:26: fatal error: ClpSimplex.hpp: No such file or directory #include "ClpSimplex.hpp" So the compiler can't find the Clp library. I also tried to copy-paste more code from the first Makefile into the second, but it still gives me that same error. Q: Can you please help me with merging the two makefiles or pointing out a more elegant way? Q: In this case is it indeed better to merge the two Makefiles? I also tried to use cmake, but I gave upon that one quickly, because I don't know much about flex and bison.

    Read the article

  • Getting an error when using 'make' command (installing aircrack-ng on Ubuntu 12.04)

    - by Mohd Arafat Hossain
    I followed instructions from here http://securit.se/en/2012/03/kompilera-reaver-ubuntu-12-04/. I edited the 'common.mak' file successfully and when I type in make I get this error mohd-arafat-hossain@TUD:~/aircrack-ng-1.1$ make make -C src all make[1]: Entering directory `/home/mohd-arafat-hossain/aircrack-ng-1.1/src' make -C osdep make[2]: Entering directory `/home/mohd-arafat-hossain/aircrack-ng-1.1/src/osdep' Building for Linux make[3]: Entering directory `/home/mohd-arafat-hossain/aircrack-ng-1.1/src/osdep' make[3]: `.os.Linux' is up to date. make[3]: Leaving directory `/home/mohd-arafat-hossain/aircrack-ng-1.1/src/osdep' make[2]: Leaving directory `/home/mohd-arafat-hossain/aircrack-ng-1.1/src/osdep' gcc -g -W -Wall -O3 -D_FILE_OFFSET_BITS=64 -D_REVISION=0 -Iinclude -c -o aircrack-ng.o aircrack-ng.c In file included from aircrack-ng.c:65:0: crypto.h:12:26: fatal error: openssl/hmac.h: No such file or directory compilation terminated. make[1]: *** [aircrack-ng.o] Error 1 make[1]: Leaving directory `/home/mohd-arafat-hossain/aircrack-ng-1.1/src' make: *** [all] Error 2 What am I supposed to do now?

    Read the article

  • jQuery Masonry – the answer to vertical flow layout

    - by joelvarty
    “Masonry is a layout plugin for jQuery. Think of it as the flip side of CSS floats. Whereas floating arranges elements horizontally then vertically, Masonry arranges elements vertically then horizontally according to a grid. The result minimizes vertical gaps between elements of varying height, just like a mason fitting stones in a wall.” I love this concept, and until it shows up in css (if ever…), I plan on using it. from jQuery Masonary via Daring Fireball   More later - joel

    Read the article

  • Lego Sport Champions: Soccer – An 80s Style LEGO Video

    - by Asian Angel
    Are you a fan of LEGO and soccer? Then watch as these two teams use some fancy LEGO footwork to try and win the championship game in this nicely done retro-look video. Wait!! Is that player building a brick wall?? Lego Sport Champions: Soccer [YouTube] Latest Features How-To Geek ETC Have You Ever Wondered How Your Operating System Got Its Name? Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 Lego Sport Champions: Soccer – An 80s Style LEGO Video Access the Options for Your Favorite Extensions Easier in Firefox Don’t Sleep Keeps Your Windows Machine Awake DropSpace Syncs Android Files to Dropbox Field of Poppies Wallpaper The History Of Operating Systems [Infographic]

    Read the article

  • 5 tipologie di consumatori con cui confrontarsi per rendere vincenti le proprie strategie di CRM

    - by antonella.buonagurio(at)oracle.com
    Sono 5 le tipologie di consumatori che  rappresentano 5 differenti modalità di acquisto di cui le aziende devono tenere in considerazione nella pianificazione dei propri piani strategici del 2011. Oltre al "consumatore just-in-time", già citato in un precedente articolo apparso sul Wall Street Journal a Novembre ecco le altre tipologie evidenziate da Lioe Arussy (Strativity Group). Il consumatore alla ricerca degli sconti Il consumatore diffidente Il consumatore timoroso Il consumatore fai-da-te Il consumatore indulgente Per ognuno di queste categorie viene evidenziato il modello di comportamento e il conseguente modello di acquisto. Per saperne di più  

    Read the article

  • Box2D Static-Dynamic body joint eliminates collisions

    - by andrewz
    I have a static body A, and a dynamic body B, and a dynamic body C. A is filtered to not collide with anything, B and C collide with each other. I wish to create a joint between B and A. When I create a joint (ex. revolute), B no longer collides with C - C passes through it as if it does not exist. What am I doing wrong? How can adding a joint prevent a body from colliding with another body it used to? EDIT: I want to join B with A, and have B collide with C, but not A collide with C. In realistic terms, I'm trying to create a revolute joint between a wheel (B) and a wall (A), and have a box (C) hit the wheel and the wheel would then rotate. EDIT: I create a the simplest revolute joint I can with these parameters (C++): b2RevoluteJointDef def; def.Initialize(A, B, B -> GetWorldCenter()); world -> CreateJoint(&def);

    Read the article

  • Using your own gameloop logic on iphone?

    - by kkan
    I'm currently working on moving some android-ndk code to the iphone and have hit a wall. I'm new to iphone development, and from looking at some samples it seems that the main loop is handled for you and all you've got to do is override the render method on the view to handle the rendering and add a selector to handle the update methods. The render method itself lookslike it's attached to the windows refresh. But in android I've got my own game loop that controls the rendering and updates using c++ time.h. is it possible to implement the same here bypassing apple's loop? I'd really like the keep the structures of the code similar. Thanks!

    Read the article

  • Steve Ballmer réfute la disparition des PC au profit des tablettes, quel sera l'avenir des appareils

    Mise à jour du 04.06.2010 par Katleen Steve Ballmer réfute la disparition des PCs au profit des tablettes en réponse à Steve Jobs, quel sera alors l'avenir des appareils numériques ? Suite au passage de Steve Jobs sur le grill des journalistes lors de la conférence D8, Steve Ballmer (CEO de Microsoft) s'est lui aussi assis dans la même chaise hier, où il a répondu aux questions de l'équipe de Wall Street Journal. «Quand nous étions une nation agraire, toutes les voitures étaient des camions. Mais à partir du moment où la population a commencé à migrer vers les villes, les gens ont commencé à utiliser des voitures. Je pense que les PC vont connaître le même sort que les camions. De moins en moins de ...

    Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >