Search Results

Search found 12017 results on 481 pages for 'root'.

Page 184/481 | < Previous Page | 180 181 182 183 184 185 186 187 188 189 190 191  | Next Page >

• RTL8192SU Linux Issue Installing Driver

  - by s32ialx

  OK I've read tons of fourms of people getting the onboard RTL8192SE working and the RTL8192SU working dif is U = USB they are both N and i have both Toshiba L500D-00T pre-installed Win Vistax64-HP and i have obtained the free Win7x64-HP upgrade the onboard wificard sucks and can't hold a stable connection for more then 20minutes in windows but the usb is amazing. Now problem is i tried both Ubuntu and Mandriva with no resolve the issue is the onboard drive detects and actually SHOWS that it's there but no wireless networks detect so it's saying no SSID's are broadcasting which i know is a lie since I'm running a 2wire bell dsl modem with built in wifi and a Linksys wrt54g w/ DD-WRT firmware and both are broadcasting fine. Why don't i use the USB? In the hardware device manager in mandriva it shows up as unknown but shows that it's realtek and that it's a 8192 chipset. but no option to for a driver install and when i do a make in terminal i get this error and no clue what it means [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# make make: *** /lib/modules/2.6.31.12-desktop-3mnb/build: No such file or directory. Stop. make: *** [all] Error 2 [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# any help appreciated. and just encase I'm running currently Mandriva Spring 2010 Free

  Read the article

• Why does nmap ping scan over a VPN link return all hosts alive?

  - by ewwhite

  I'm curious as to why running an nmap -sP (ping scan) on a remote subnet linked via a Cisco site-to-site IPSec tunnel returns "host up" status for every IP in the range. [root@xt ~]# nmap -sP 192.168.108.* Starting Nmap 4.11 ( http://www.insecure.org/nmap/ ) at 2012-11-22 14:08 CST Host 192.168.108.0 appears to be up. Host 192.168.108.1 appears to be up. Host 192.168.108.2 appears to be up. Host 192.168.108.3 appears to be up. Host 192.168.108.4 appears to be up. Host 192.168.108.5 appears to be up. . . . Host 192.168.108.252 appears to be up. Host 192.168.108.253 appears to be up. Host 192.168.108.254 appears to be up. Host 192.168.108.255 appears to be up. Nmap finished: 256 IP addresses (256 hosts up) scanned in 14.830 seconds However, a ping of a known-down IP simply times out or doesn't return anything... [root@xt ~]# ping 192.168.108.201 PING 192.168.108.201 (192.168.108.201) 56(84) bytes of data. --- 192.168.108.201 ping statistics --- 144 packets transmitted, 0 received, 100% packet loss, time 143001ms Is there a more effective way to scan live devices connected in this manner?

  Read the article

• Howo to get Multipath IO with Dell MD3600i into active/active setup?

  - by Disco

  I'm desperately trying to improve performance of my SAN connection. Here's what i have: [root@xnode1 dell]# multipath -ll mpath1 (36d4ae520009bd7cc0000030e4fe8230b) dm-2 DELL,MD36xxi [size=5.5T][features=3 queue_if_no_path pg_init_retries 50][hwhandler=1 rdac][rw] \_ round-robin 0 [prio=200][active] \_ 18:0:0:0 sdb 8:16 [active][ready] \_ 19:0:0:0 sdd 8:48 [active][ghost] \_ 20:0:0:0 sdf 8:80 [active][ghost] \_ 21:0:0:0 sdh 8:112 [active][ready] And multipath.conf : defaults { udev_dir /dev polling_interval 5 prio_callout none rr_min_io 100 max_fds 8192 user_friendly_names yes path_grouping_policy multibus default_features "1 fail_if_no_path" } blacklist { device { vendor "*" product "Universal Xport" } } devices { device { vendor "DELL" product "MD36xxi" path_checker rdac path_selector "round-robin 0" hardware_handler "1 rdac" failback immediate features "2 pg_init_retries 50" no_path_retry 30 rr_min_io 100 prio_callout "/sbin/mpath_prio_rdac /dev/%n" } } And sessions. [root@xnode1 dell]# iscsiadm -m session tcp: [13] 10.0.51.220:3260,1 iqn.1984-05.com.dell:powervault.md3600i.6d4ae520009bd7cc000000004fd7507c tcp: [14] 10.0.50.221:3260,2 iqn.1984-05.com.dell:powervault.md3600i.6d4ae520009bd7cc000000004fd7507c tcp: [15] 10.0.51.221:3260,2 iqn.1984-05.com.dell:powervault.md3600i.6d4ae520009bd7cc000000004fd7507c tcp: [16] 10.0.50.220:3260,1 iqn.1984-05.com.dell:powervault.md3600i.6d4ae520009bd7cc000000004fd7507c I'm getting very poor read performance : dd if=/dev/mapper/mpath1 of=/dev/null bs=1M count=1000 The SAN is configured as follows: CTRL0,PORT0 : 10.0.50.220 CTRL0,PORT1 : 10.0.50.221 CTRL1,PORT0 : 10.0.51.220 CTRL1,PORT1 : 10.0.51.221 And on the host : IF0 : 10.0.50.1 IF1 : 10.0.51.1 (Dual 10GbE Ethernet Card Intel DA2) It's connected to a 10gbE switch dedicated for SAN traffic. My questions being; why the connection is set up as 'ghost' and not 'ready' like an active/active configuration ?

  Read the article

• Apache mod_rewrite weird behavior in Internet Explorer

  - by morrty

  I'm attempting to setup redirection for a couple of root domains. Firstly, here is the code in my httpd-vhosts.conf file: <VirtualHost *:80> ServerAdmin ****@example.com ServerName example.com ServerAlias example2.com RewriteEngine On RewriteCond %{HTTP_HOST} !^192\.168\.0\.1$ # This is our WAN IP RewriteCond %{HTTP_HOST} !^www\. [NC] RewriteCond %{HTTP_HOST} !^$ RewriteRule ^/?(.*) http://www.%{HTTP_HOST}/$1 [L,R,NE] </VirtualHost> What this does is redirect the root domain of example.com or example2.com or any host other than www to www.example(2).com The part I'm having a problem with is the RewriteRule itself. the $1 is supposed to match the pattern of the RewriteRule and add it in the substitution. For example: "http://example.com/test.html" should rewrite to "http://www.example.com/test.html" It works in all modern browsers like it's supposed to except for IE8 or IE9 (I didn't test other IE versions). In IE, this works: "http://example.com" to "http://www.example.com" In IE, this does not work: "http://example.com/test.html" to "http://www.example.com/test.html" Does anyone have an explanation for this behavior? I hope I've explained it well enough. Thank you.

  Read the article

• Sparc v440 unable 2 boot after recommended patch install

  - by user100660

  After installing the October 2011 recommended patch bundle on a Solaris 10 the host fails to boot. The output is {0} ok boot SC Alert: Host System has Reset screen not found. keyboard not found. Keyboard not present. Using ttya for input and output. Sun Fire V440, No Keyboard Copyright 1998-2003 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.10.10, 8192 MB memory installed, Serial #54744555. Ethernet address 0:3:ba:43:55:eb, Host ID: 834355eb. Rebooting with command: boot Boot device: /pci@1f,700000/scsi@2/disk@0,0:a File and args: \ Evaluating: Out of memory Warning: Fcode sequence resulted in a net stack depth change of 1 Evaluating: Evaluating: The file just loaded does not appear to be executable. {3} ok If I do a boot -F failsafe the host come up and I'm able to mount the root device (ufs on /dev/dsk/c1t0d0s0) and nothing appears broken, i.e I can see the logfiles from the patch install etc. Root device still have 1GB+ free. Only 2 kernel patches was installed from the patch bundle: 144500-19 & 147440-02. Any hints how to debug it further, etc.

  Read the article

• Explanation for kernel error - Eeeek! page_mapcount went negative

  - by Aditya Advani

  Internet says this is a genuine Kernel Bug but does anyone know what triggers it?? Server running CentOS x86_64 with kernel 2.6.27.24 Here is my crash output: [root@u15345757 httpdocs]# Message from syslogd@ at Thu Aug 6 01:42:22 2009 ... u15345757 kernel: [1145736.506380] Eeek! page_mapcount(page) went negative! (-1) Message from syslogd@ at Thu Aug 6 01:42:22 2009 ... u15345757 kernel: [1145736.517515] page pfn = d0a3 Message from syslogd@ at Thu Aug 6 01:42:22 2009 ... u15345757 kernel: [1145736.523814] page->flags = 10000000000083c Message from syslogd@ at Thu Aug 6 01:42:22 2009 ... u15345757 kernel: [1145736.532489] page->count = 2 Message from syslogd@ at Thu Aug 6 01:42:22 2009 ... u15345757 kernel: [1145736.538741] page->mapping = ffff88001f01a110 Message from syslogd@ at Thu Aug 6 01:42:22 2009 ... u15345757 kernel: [1145736.547924] vma->vm_ops = 0x0 Message from syslogd@ at Thu Aug 6 01:42:22 2009 ... u15345757 kernel: [1145736.554543] [ cut here ] Message from syslogd@ at Thu Aug 6 01:42:23 2009 ... u15345757 kernel: [1145736.564528] invalid opcode: 0000 [1] SMP Message from syslogd@ at Thu Aug 6 01:42:23 2009 ... u15345757 kernel: [1145736.564528] Code: 80 e8 22 51 fd ff 48 8b 85 90 00 00 00 48 85 c0 74 19 48 8b 40 20 48 85 c0 74 10 48 8b 70 58 48 c7 c7 10 7f 7d 80 e8 fd 50 fd ff <0f> 0b eb fe 8b 77 18 41 58 5b 5d 83 e6 01 f7 de 83 c6 04 e9 df Broadcast message from root (pts/3) (Thu Aug 6 01:49:29 2009): The system is going down for reboot NOW!

  Read the article

• Gluster bricks are offline and errors in logs

  - by Roman Newaza

  I have substituted all the IP addresses with hostnames and renamed configs (IP to hostname) in /var/lib/glusterd by my shell script. After that I restarted Gluster Daemon and the volume. Then I checked if all the peers are connected: root@GlusterNode1a:~# gluster peer status Number of Peers: 3 Hostname: gluster-1b Uuid: 47f469e2-907a-4518-b6a4-f44878761fd2 State: Peer in Cluster (Connected) Hostname: gluster-2b Uuid: dc3a3ff7-9e30-44ac-9d15-00f9dab4d8b9 State: Peer in Cluster (Connected) Hostname: gluster-2a Uuid: 72405811-15a0-456b-86bb-1589058ff89b State: Peer in Cluster (Connected) I could see mounted volumes size change on all the nodes when I execute df command, so new data is coming. But recently I noticed error messages in app log: copy(/storage/152627/dat): failed to open stream: Structure needs cleaning readfile(/storage/1438227/dat): failed to open stream: Input/output error unlink(/storage/189457/23/dat): No such file or directory Finally, I have found out some bricks are offline: root@GlusterNode1a:~# gluster volume status Status of volume: storage Gluster process Port Online Pid ------------------------------------------------------------------------------ Brick gluster-1a:/storage/1a 24009 Y 1326 Brick gluster-1b:/storage/1b 24009 N N/A Brick gluster-2a:/storage/2a 24009 N N/A Brick gluster-2b:/storage/2b 24009 N N/A Brick gluster-1a:/storage/3a 24011 Y 1332 Brick gluster-1b:/storage/3b 24011 N N/A Brick gluster-2a:/storage/4a 24011 N N/A Brick gluster-2b:/storage/4b 24011 N N/A NFS Server on localhost 38467 Y 24670 Self-heal Daemon on localhost N/A Y 24676 NFS Server on gluster-2b 38467 Y 4339 Self-heal Daemon on gluster-2b N/A Y 4345 NFS Server on gluster-2a 38467 Y 1392 Self-heal Daemon on gluster-2a N/A Y 1402 NFS Server on gluster-1b 38467 Y 2435 Self-heal Daemon on gluster-1b N/A Y 2441 What can I do about that? I need to fix it. Note: CPU and Network usage of all the four nodes are about the same.

  Read the article

• ERROR with rpm_check_debug vs depsolve

  - by Frank Thornton

  Transaction Summary ========================================================================================================================================================== Install 9 Package(s) Upgrade 227 Package(s) Remove 1 Package(s) Total size: 252 M Downloading Packages: Running rpm_check_debug ERROR with rpm_check_debug vs depsolve: libasound.so.2()(64bit) is needed by libgcj-4.4.7-4.el6.x86_64 libasound.so.2(ALSA_0.9)(64bit) is needed by libgcj-4.4.7-4.el6.x86_64 ** Found 15 pre-existing rpmdb problem(s), 'yum check' output follows: alsa-lib-devel-1.0.22-3.el6.x86_64 has missing requires of alsa-lib = ('0', '1.0.22', '3.el6') alsa-lib-devel-1.0.22-3.el6.x86_64 has missing requires of libasound.so.2()(64bit) alsa-utils-1.0.22-5.el6.x86_64 has missing requires of libasound.so.2()(64bit) alsa-utils-1.0.22-5.el6.x86_64 has missing requires of libasound.so.2(ALSA_0.9)(64bit) alsa-utils-1.0.22-5.el6.x86_64 has missing requires of libasound.so.2(ALSA_0.9.0rc4)(64bit) alsa-utils-1.0.22-5.el6.x86_64 has missing requires of libasound.so.2(ALSA_0.9.0rc8)(64bit) frontpage-2002-SR1.2.i386 has missing requires of libexpat.so.0 gstreamer-plugins-base-0.10.29-2.el6.x86_64 has missing requires of libasound.so.2()(64bit) gstreamer-plugins-base-0.10.29-2.el6.x86_64 has missing requires of libasound.so.2(ALSA_0.9)(64bit) gstreamer-plugins-base-0.10.29-2.el6.x86_64 has missing requires of libasound.so.2(ALSA_0.9.0rc4)(64bit) libgcj-4.4.7-3.el6.x86_64 has missing requires of libasound.so.2()(64bit) libgcj-4.4.7-3.el6.x86_64 has missing requires of libasound.so.2(ALSA_0.9)(64bit) 1:qt-x11-4.6.2-26.el6_4.x86_64 has missing requires of libasound.so.2()(64bit) 1:qt-x11-4.6.2-26.el6_4.x86_64 has missing requires of libasound.so.2(ALSA_0.9)(64bit) 1:qt-x11-4.6.2-26.el6_4.x86_64 has missing requires of libasound.so.2(ALSA_0.9.0rc4)(64bit) Your transaction was saved, rerun it with: yum load-transaction /tmp/yum_save_tx-2013-12-23-22-364infzT.yumtx root@www1 [~]# I did some research and this is due to a 32bit binary trying to install itself or broken repo? root@www1 [~]# yum repolist Loaded plugins: fastestmirror, security Loading mirror speeds from cached hostfile * base: centos.mirror.lstn.net * extras: mirror.ash.fastserv.com * updates: ftp.usf.edu repo id repo name status base CentOS-6 - Base 6,284+83 dag Dag RPM Repository for Red Hat Enterprise Linux 4,559+91 extras CentOS-6 - Extras 14 updates CentOS-6 - Updates 247+39 repolist: 11,104 Now I disabled epel and rpmforge repops and still ended up with the same issues. Ideas?

  Read the article

• Cant connect to MySQL server from Java application

  - by RN

  This is on VPS\Centos server. The MySQL server is pre configured. I am running the Java application on Tomcat My Java web application is not able to connect to the MySQL server. I get an error - "Caused by: java.net.ConnectException: Connection refused" I suspect this to be a configuration problem rather than a coding problem- hence I have posted this on ServerFault And yes, The same web-app is able to connect to MySQL on a different linux box This is the URL that I provided to my Java application (note- it assumes default port) url = "jdbc:mysql://localhost/pickupgames" My first suspicion was that I am running on a non-default port So I tried to find the port where mySQL server is running I tried every trick mentioned in http://serverfault.com/questions/116100/how-to-check-what-port-mysql-is-running-on But no luck ! SHOW GLOBAL VARIABLES LIKE 'PORT'; This shows port 0 netstat -tlnp doesn't show mysql at all /etc/my.cnf It has no port entry telnet localhost 3306 Doesn't connect And in case you are wondering if mysql server is running at all or not It is And I know for sure, because I have been able to login using the mysql command Also # ps -ef|grep 'mysql' root 31839 27662 0 00:49 pts/3 00:00:00 grep mysql root 32452 1 0 Apr02 ? 00:00:00 /bin/sh /usr/bin/mysqld_safe --skip-grant-tables --skip-networking mysql 32504 32452 0 Apr02 ? 00:00:06 /usr/libexec/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-file=/var/run/mysqld/mysqld.pid --skip-external-locking --socket=/var/lib/mysql/mysql.sock --skip-grant-tables --skip-networking Please note the --skip-networking parameter Does this have something to do with the issue ? Any explanation why I cant connect to mysql server on port 3306 by telnet? Or why it docent show up under netstat? Any suggestion on whet I should try next ?

  Read the article

• How To Set Up A Loadbalanced High-Availability Apache Cluster On Windows

  - by bReAd

  Setting up a two-node Apache web server cluster that provides high-availability. In front of the Apache cluster we create a load balancer that splits up incoming requests between the two Apache nodes. Because we do not want the load balancer to become another “Single Point Of Failure”, we must provide high-availability for the load balancer, too. Therefore our load balancer will in fact consist out of two load balancer nodes that monitor each other using heartbeat, and if one load balancer fails, the other takes over silently. The following setup is proposed: Apache node 1: webserver1.example.com (webserver1) – IP address: 192.168.0.101; Apache document root: /var/www Apache node 2: webserver2.example.com (webserver2) – IP address: 192.168.0.102; Apache document root: /var/www Load Balancer node 1: loadb1.example.com (loadb1) – IP address: 192.168.0.103 Load Balancer node 2: loadb2.example.com (loadb2) – IP address: 192.168.0.104 Virtual IP Address: 192.168.0.105 (used for incoming requests) Currently, there are many solutions for Linux machines and there aren't any on windows. I've tried searching a long time for solutions on Windows platform How do I create the virtual IP in windows and perform monitoring and make the load balancer listen to the virtual IP Address?

  Read the article

• Getting Error while running RED5 server - class path resource [red5.xml] cannot be opened because it does not exist

  - by sunil221

  HI , I have installed java version "1.6.0_14" and Ant version 1.8.2 for red5 Server. when i am trying to run red5 server i am getting the following error please help Root: /usr/local/red5 Deploy type: bootstrap Logback selector: org.red5.logging.LoggingContextSelector Setting default logging context: default 11:27:39.838 [main] INFO org.red5.server.Launcher - Red5 Server 1.0.0 RC1 $Rev: 4171 $ (http://code.google.com/p/red5/) Red5 Server 1.0.0 RC1 $Rev: 4171 $ (http://code.google.com/p/red5/) SLF4J: Class path contains multiple SLF4J bindings. SLF4J: Found binding in [jar:file:/usr/local/red5/red5.jar!/org/slf4j/impl/StaticLoggerBinder.class] SLF4J: Found binding in [jar:file:/usr/local/red5/lib/logback-classic-0.9.26.jar!/org/slf4j/impl/StaticLoggerBinder.class] SLF4J: See http://www.slf4j.org/codes.html#multiple_bindings for an explanation. 11:27:39.994 [main] INFO o.s.c.s.FileSystemXmlApplicationContext - Refreshing org.springframework.context.support.FileSystemXmlApplicationContext@39d85f79: startup date [Mon Dec 21 11:27:39 EST 2009]; root of context hierarchy 11:27:40.149 [main] INFO o.s.b.f.xml.XmlBeanDefinitionReader - Loading XML bean definitions from class path resource [red5.xml] Exception org.springframework.beans.factory.BeanDefinitionStoreException: IOException parsing XML document from class path resource [red5.xml]; nested exception is java.io.FileNotFoundException: class path resource [red5.xml] cannot be opened because it does not exist Bootstrap complete

  Read the article

• How to specify search domain name of nginx resolver for proxy_pass

  - by myjpa

  Assuming my server is www.mydomain.com, on Nginx 1.0.6 I'm trying to proxy all request to http://www.mydomain.com/fetch to other hosts, the destination URL is specified as a GET parameter named "url". For instance, when user requests either one: http://www.mydomain.com/fetch?url=http://another-server.mydomain.com/foo/bar http://www.mydomain.com/fetch?url=http://another-server/foo/bar it should be proxyed to http://another-server.mydomain.com/foo/bar I'm using the following nginx config and it works fine only if the url paramter contains domain name, like http://another-server.mydomain.com/...; but fails on http://another-server/... on error: another-server could not be resolved (3: Host not found) nginx.conf is: http { ... # the DNS server resolver 171.10.129.16; server { listen 80; server_name localhost; root /path/to/site/root; location = /fetch { proxy_pass $arg_url; } } Here, I'd like to resolve all URL without domain name as host name in mydomain.com, in /etc/resolv.conf, it's possible to specify default search domain name for the whole Linux system, but it doesn't affect nginx resolver: search mydomain.com Is it possible in Nginx? Or alternatively, how to "rewrite" the url parameter so that I can add the domain name?

  Read the article

• Apache directory structure with multiple hosted languages.

  - by anomareh

  I just got a new work machine up and running and I'm trying to decide on how to set everything up directory wise. I've done some digging around and really haven't been able to find anything conclusive. I know it's a question with a variety of answers but I'm hoping there's some sort of general guidelines or best practices to go by. With that said, here are a few things specific to my situation. I will be doing actual development and testing on the same machine as the server. It is a single user machine in the sense that I will be the only one working on the machine. There will be multiple hosted languages, specifically PHP and RoR while possibly expanding later. I'd like the setup to translate well to a production environment. With those 3 things in mind there are a couple of things I've had in the back of mind. Seeing as it's a single user machine I haven't been able to decide whether or not I should be working on things out of my home directory or if they should be located outside of it. I'm feeling that outside of a user directory would be better as it would translate better to a production environment, but I'm also not sure if that will come with any permission annoyances or concerns seeing as I'll be working on the same machine. Hosting multiple languages seems like it may be a bit quirky. With PHP I've found you're generally just dumping the project somewhere in the document root where as something like a Rails app you have the entire project and you only want the public directory in the document root. Thanks for any insight, opinion, or just personal preference from experience anyone can offer.

  Read the article

• Why do I get xfs_freeze "Operation not supported" error with ec2-consistent-snapshot? Debian Squeeze w/ext4 filesystem

  - by Michael Endsley

  I'm running the following command: [root@somehost ~]# ec2-consistent-snapshot --aws-credentials-file '/some/dir/file' --mysql --mysql-socket '/var/run/mysqld/mysql.sock' --mysql-username 'backup' --mysql-password 'password' --freeze-filesystem '/dev/xvda1' vol-xxxxxx It returns this error: xfs_freeze: cannot freeze filesystem at /dev/xvda1: Operation not supported ec2-consistent-snapshot: ERROR: xfs_freeze -f /dev/xvda1: failed(256) snap-eeb66393 xfs_freeze: cannot unfreeze filesystem mounted at /dev/xvda1: Invalid argument ec2-consistent-snapshot: ERROR: xfs_freeze -u /dev/xvda1: failed(256) This is being run on Debian Squeeze with the ext4 Linux filesystem. Can anyone explain this error to me, or what might be its cause? When googling, I found information about it needing to be executed with sudo, but I'm performing the entire operation as root. I also found some posts about trying to run it after a CentOS upgrade using yum, but the situation appeared dissimilar. It's difficult to find things referring to this situation exactly. xfs_freeze is available for use on the filesystem. Is it possible that the filesystem, despite being ext4, somehow doesn't support freezing? Sorry if I've missed some bit of StackExchange etiquette with this post -- it's my first venture here!

  Read the article

• KVM Guest with NAT + Bridged networking

  - by Daniel

  I currently have a few KVM Guests on a dedicated server with bridged networking (this works) and i can successfully ping the outside ips i assign via ifconfig (in the guest). However, due to the fact i only have 5 public ipv4 ip addresses, i would like to port forward services like so: hostip:port - kvm_guest:port UPDATE I found out KVM comes with a "default" NAT interface, so added the virtual NIC to the Guest virsh configuration then configured it in the Guest, it has the ip address: 192.168.122.112 I can successfully ping 192.168.122.112 and access all ports on 192.168.122.112 from the KVM Host, so i tried to port forward like so: iptables -t nat -I PREROUTING -p tcp --dport 5222 -j DNAT --to-destination 192.168.122.112:2521 iptables -I FORWARD -m state -d 192.168.122.0/24 --state NEW,RELATED,ESTABLISHED -j ACCEPT telnet KVM_HOST_IP 5222 just hangs on "trying" telnet 192.168.122.112 2521 works [root@node1 ~]# tcpdump port 5222 tcpdump: WARNING: eth0: no IPv4 address assigned tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 23:43:47.216181 IP 1.152.245.247.51183 > null.xmpp-client: Flags [S], seq 1183303931, win 65535, options [mss 1400,nop,wscale 3,nop,nop,TS val 445777813 ecr 0,sackOK,eol], length 0 23:43:48.315747 IP 1.152.245.247.51183 > null.xmpp-client: Flags [S], seq 1183303931, win 65535, options [mss 1400,nop,wscale 3,nop,nop,TS val 445778912 ecr 0,sackOK,eol], length 0 23:43:49.415606 IP 1.152.245.247.51183 > null.xmpp-client: Flags [S], seq 1183303931, win 65535, options [mss 1400,nop,wscale 3,nop,nop,TS val 445780010 ecr 0,sackOK,eol], length 0 7 packets received by filter 0 packets dropped by kernel [root@node1 ~]# iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere 192.168.122.0/24 state NEW,RELATED,ESTABLISHED Chain OUTPUT (policy ACCEPT) target prot opt source destination All help is appreciated. Thanks.

  Read the article

• Cannot connect to server via SSH

  - by Rayne

  I'm running RHEL 6.0, and I accidentally moved the /bin, /boot, /cgroup, console.txt, /data, /dev, /etc to another folder. I think I managed to move these folders back, but now I'm having trouble connecting to the server using SSH, but am able to access the server via VNC. When I tried to connect to the server using a terminal from another server, I get the error ssh_exchange_identification: Connection closed by remote host I'm currently still connected via SSH to the server (haven't closed the window yet), and am still able to access it normally. But if I try to open a new SSH terminal from my current session, I see /bin/bash: Permission denied If I try to open a new SSH File Transfer window from my current session, I get the error File transfer server could not be started or it exited unexpectedly. Exit value 0 was returned. Most likely the sftp-server is not in the path of the user on the server-side I checked and I have Subsystem sftp /usr/libexec/openssh/sftp-server which is the same path as the output of locate sftp-server Also, when I tried to restart sshd, I get the error Couldn't open /dev/null: Permission denied But my /dev/null has the permissions crw-rw-rw- for root,root. How can I resolve this? ETA: Thanks for all your help! I was able to start ssh by running the application directly /usr/sbin/sshd Even though the status of the openssh-daemon is still "stopped".

  Read the article

• Process killing trouble

  - by Aditya Singh

  I am trying to program a server software which involves a lot of testing on java / scala platform. Whenever i compile and execute the code. It starts listening on port 80. Sometimes i need to terminate it by Ctrl+C when it hangs. In that case, ubuntu is not freeing the port. So in order to run the process, i have to restart the machine. I see this at ps aux root 1924 0.0 0.0 5796 1660 pts/0 T 05:44 0:00 sudo scala - root 1925 0.2 1.5 491448 40796 pts/0 Tl 05:44 0:03 java -Xmx256M -Xms16M So process 1924 and 1925. I did sudo kill on both these. But then they keep on persisting even after a long time. sudo nmap -T Aggressive -A -v 127.0.0.1 -p 1-65000 Scanning localhost (127.0.0.1) [65000 ports] Discovered open port 80/tcp on 127.0.0.1 It means its still there ! sudo netstat --tcp --udp --listening --program tcp6 0 0 [::]:www [::]:* LISTEN 1925/java tcp6 0 0 ip6-localhost:ipp [::]:* LISTEN 1185/cupsd This means its 1925 - java How to kill it.

  Read the article

• A complicated nginx/php-fpm chroot setup

  - by Rsaesha

  I'm running nginx and php-fpm, and I want to set up jails for each host. My setup is a little complicated, so following tutorials on the web gets me nowhere. Each site has a directory /var/www/domain.name/ Inside that directory, there will be a public/ directory which will be the website root, a logs/ directory which will store nginx logs for that site specifically, and the chroot filesystem (etc/, usr/, etc.) The first problem I've run into is that nomatter how I configure it, PHP-FPM cannot find the files that are passed to it via nginx. They result in a "Primary script unknown" error, and to make matters worse, the error messages from PHP-FPM are no more verbose than that, so I can't figure out what path is being passed by nginx. A php-fpm pool configuration for a host looks like this: [host] user = host group = www-data chroot = /var/www/domain.name chdir = /public listen = 127.0.0.1:900x 'x' is incremented for each pool. The nginx config for this host looks like this: server { listen 80; server_name domain.name *.domain.name; root /var/www/domain.name/public; index index.php index.html index.html; location ~ \.php$ { expires epoch; fastcgi_split_path_info ^(.+\.php)(/.+)$; include fastcgi_params; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_pass 127.0.0.1:9001; } } I'm guessing that the problem is the SCRIPT_FILENAME parameter, but I've changed it to just $fastcgi_script_name, and various other combinations, but to no avail. Can anyone help?

  Read the article

• Generic RPM package for Python 2.x

  - by RaphDG

  I have a python application, it can run on Python = 2.6 and it's architecture independant. I need the rpm package of this application to be installed on Fedora 14 (python 2.7) and Centos 6.2 (python 2.6). I currently use mock to build one rpm package for each "flavour" and it works well. I apparently can't install the Centos compiled rpm on Fedora. It gives me this error message : error: Failed dependencies: python(abi) = 2.6 is needed by myapp-0.9.el6.noarch Here is the relevant part of my .spec file : %{!?python_sitelib: %global python_sitelib %(%{__python} -c "from distutils.sysconfig import get_python_lib; print(get_python_lib())")} %{!?python_sitearch: %global python_sitearch %(%{__python} -c "from distutils.sysconfig import get_python_lib; print(get_python_lib(1))")} Name: myapp Version: #VERSION# Release: #RELEASE#%{dist} Summary: myapp Group: Development/Languages License: Apache v2 Source0: %{name}-%{version}-#RELEASE#.tar.gz BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n) BuildArch: noarch BuildRequires: python-devel BuildRequires: python-setuptools %description myapp %prep %setup -c %build %{__python} setup.py build %install %{__rm} -rf %{buildroot} %{__python} setup.py install -O1 --skip-build --root %{buildroot} Do I really have to use mock and build 2 rpms or is there another way to create a single generic 2.x rpm package ?

  Read the article

• Time not propagating to machines on Windows domain

  - by rbeier

  We have a two-domain Active Directory forest: ourcompany.com at the root, and prod.ourcompany.com for production servers. Time is propagating properly through the root domain, but servers in the child domain are unable to sync via NTP. So the time on these servers is starting to drift, since they're relying only on the hardware clock. WHen I type "net time" on one of the production servers, I get the following error: Could not locate a time-server. More help is available by typing NET HELPMSG 3912. When I type "w32tm /resync", i get the following: Sending resync command to local computer The computer did not resync because no time data was available. "w32tm /query /source" shows the following: Free-running System Clock We have three domain controllers in the prod.ourcompany.com subdomain (overkill, but the result of a migration - we haven't gotten rid of one of the old ones yet.) To complicate matters, the domain controllers are all virtualized, running on two different physical hosts. But the time on the domain controllers themselves is accurate - the servers that aren't DCs are the ones having problems. Two of the DCs are running Server 2003, including the PDC emulator. The third DC is running Server 2008. (I could move the PDC emulator role to the 2008 machine if that would help.) The non-DC servers are all running Server 2008. All other Active Directory functionality works fine in the production domain - we're only seeing problems with NTP. I can manually sync each machine to the time source (the PDC emulator) by doing the following: net time \\dc1.prod.ourcompany.com /set /y But this is just a one-off, and it doesn't cause automated time syncing to start working. I guess I could create a scheduled task which runs the above command periodically, but I'm hoping there's a better way. Does anyone have any ideas as to why this isn't working, and what we can do to fix it? Thanks for your help, Richard

  Read the article

• Cannot connect on TFS 2012 server through SSL with invalid certificate

  - by DaveWut

  I saw the problem on some forums and even here, but not as specific as mine. So here's the thing, So I've configured a TFS 2012 server, on one of my personnel server at home, and now, I'm trying to make it available through the internet, with the help of apache2 on a different UNIX based, physical server. The thing is working perfectly, I don't have any problem accessing the address https://tfs.something.com/tfs through my browser. The address can be pinged and I do have access to the TFS control panel through it. How does it work? Well, with apache2 you can set a virtual host and set up the ProxyPass and ProxyPassReserver setting, so the traffic can externally comes from a secure SSL connection, through a specified domain or sub-domain, but it can be locally redirect on a clear http session on a different port. This is my current setup. As I already said, I can access the web interface, but when I'm trying to connect with Visual Studio 2012, it can't be done. Here's the error I receive: http://i.imgur.com/TLQIn.png The technical information tells me: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. My SSL certificate is invalid and was automatically generated on my UNIX server. Even if I try to add it in the Trusted Root Certification Authorities either on my TFS server or on my local workstation, it doesn't work. I still receive the same error. Is there's a way to completely ignore certificate validation? If not, what's have I done? I mean, I've added the certificate in the trusted root certificates, it should works as mentioned on some forums... If you need more information, please ask me, I'll be pleased to provide you more. Dave

  Read the article

• Dell PE2950 - slow IO rates for writing and reading locally

  - by OrenM

  I'm having a serious issue with dell server PE2950. The server has really slow IO rates, so slow that I'm not able to use it anymore I tried few things to solve this: changing disks to new disks (configured them as raid1) changing perc card + perc cables reinstalling the OS of course, had to cause of changing of disks, centos 5.5 x64bit firmware update to everything virtual disks policy: No Read Ahead,Write Back, disk cache policy disabled. openmanage doesn't alert about anything, also i ran dell's diag tests, everything passed, also dell didn't see anything in deset log. dell offered to reseat everything, including the cpu, we did that as well, still io rates are slow I have several PE2950 servers, and I never had such a thing with any of those. All have similar or exact hardware as this one, all configured the same, with the same os centos 5.5 x64, same disks, same raid, same policy. Just for comparison: the problematic PE2950 server: [root@bad ~]# time sh -c "dd if=/dev/zero of=/tmp/ddfile bs=8k count=200000 && sync" 200000+0 records in 200000+0 records out 1638400000 bytes (1.6 GB) copied, 27.7946 seconds, 58.9 MB/s real 0m33.968s user 0m0.531s sys 0m26.000s good PE2950 server (with the exact same hardware): [root@good ~]# time sh -c "dd if=/dev/zero of=/tmp/ddfile bs=8k count=200000 && sync" 200000+0 records in 200000+0 records out 1638400000 bytes (1.6 GB) copied, 3.19999 seconds, 512 MB/s real 0m7.694s user 0m0.053s sys 0m4.057s Hopefully you will have an idea what can cause the problem.

  Read the article

• backupexec 12.5 not following symlinks on linux agent

  - by Peter Carrero

  Ok, we are at a loss here trying to backup a linux box to a backupexec server... we got a backupexec 12.5 server and a "backupexec for windows servers linux agent" (sigh) running on one of our linux boxes. When a backup runs, we get exceptions reported for our symbolic links. it says something like: BACKUP- \\<servername>\[ROOT] File \\<servername>\[ROOT]/<foldername>/<symlink> is in the backup selection list but was not found. Looking at the selection list, the symlink shows as a 1k file on BUE. Tools-Options-Backup has Backup files and directories by following symbolic links/junction points selected. These same checkboxes are selected on the Job Setup-Job Properties-Edit Template-Advanced Additionally, all the checkboxes are checkeced on Tools-Options-Linux, Unix, and Macintosh and on the Job Set-Job Properties-Edit Template-Linux, Unix, and Macintosh. These checkboxes read: "Preserve change time", "Follow local mount points", "Follow remote mount points", "Backup contents of soft-linked directories" and "Lock remote files", but apparently changing those options produce the same result. Any help on how to get BUE to make a proper backup would be greatly appreciated. Thanks.

  Read the article

• Is there a fix to display 0 when arithmetic underflow occurs on the Windows 7 calculator?

  - by Pascal Qyy

  I have a problem that exasperates me: When I take the Windows 7 calculator in standard mode, if I do 4, then v (square root), the result is 2 Fine. But, at this point, if I do - (minus), then 2, the result is -1,068281969439142e-19 instead of 0! OK, I know about ? (machine epsilon), and yes, -1,068281969439142e-19 is less than the 64 bits ? (1.11e-16), so, we have an arithmetic underflow, in other words in this case: 0. Great, my computer is able to represent subnormal numbers instead of just flush to zero when this happens, and it seems that it is an improvement! Subnormal values fill the underflow gap with values where the absolute distance between them are the same as for adjacent values just outside of the underflow gap. This is an improvement over the older practice to just have zero in the underflow gap, and where underflowing results were replaced by zero (flush to zero). BUT: this result is false! when you try to explain the concept of the square root to a child and you end up with this kind of result, it only complicates your task... what is the point to represent subnormal numbers in a standard, non scientific calculator? So, is there a way to fix this?

  Read the article

• IIS 6 ASP.NET default handler-mappings and virtual directories

  - by mlauter

  I'm having a problem with setting a default mapping in IIS 6. I want to secure *.HTML files with ASP.NET forms authentication. The problem seems to have something to do with using virtual directories to hold the html files. Here's how it's setup: sample directory tree c:/inetpub/ (nothing in here) d:/web_files/my_web_apps d:/web_files/my_web_apps/app1/ d:/web_files/my_web_apps/app2/ d:/web_files/my_web_apps/html_files/ app1 and app2 both access the same html_files directory, so html_files is set as a virtual directory in the web apps in IIS... sample web directory tree //app1/html_files/ (points to physical directory: d:/web_files/my_web_apps/html_files/) //app2/html_files/ (points to physical directory: d:/web_files/my_web_apps/html_files/) If I put a file called test.html in the root of //app1/ and then add the default mapping to the asp.net dll and setup my security on the root folder with deny="?", then accessing test.html works exactly as expected. If I'm not authenticated, it takes me to the login.aspx page, and if I am authenticated then it displays test.html. If I put the test.html file in the html_files directory I get a totally different behavior. Now the login.aspx page loads and I stuck some code in to check if I was still authenticated: <p>autheticated: <%=User.Identity.IsAuthenticated%></p> I figured it would say false because why else would it bother to load the login page? Nope, it says true - so it knows i'm authenticated, but it won't give me access to the test.html file. I've spent several hours on this and haven't been able to solve it. I'm going to spend some more time on google to see if I've missed something. Fingers crossed.

  Read the article

< Previous Page | 180 181 182 183 184 185 186 187 188 189 190 191  | Next Page >