Search Results

Search found 172201 results on 6889 pages for 'not printing colour'.

Page 19/6889 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

  • Xen 4.0.1 not booting with device not found error

    - by Disco
    I'm trying to get Xen 4.0.1 run as dom0 on a fresh/clean install of 10.10 desktop (x64). Followed the step by step tutorial at http://wiki.xensource.com/xenwiki/Xen4.0 I have the pvops kernel in /boot, also included the ext4 fs support by recompiling the kernel by : make -j6 linux-2.6-pvops-config CONFIGMODE=menuconfig make -j6 linux-2.6-pvops-build make -j6 linux-2.6-pvops-install Here's my grub entry : menuentry 'Xen4' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 insmod ext3 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set 2bf3177a-92fd-4196-901a-da8d810b04b4 multiboot /xen-4.0.gz dom0_mem=1024M loglvl=all guest_loglvl=all module /vmlinuz-2.6.32.27 root=UUID=2bf3177a-92fd-4196-901a-da8d810b04b4 ro module /initrd.img-2.6.32.27 } blkid /dev/sda1 gives the : /dev/sda1: UUID="2bf3177a-92fd-4196-901a-da8d810b04b4" TYPE="ext3" My partition shemes is : /boot (ext3) / (ext4) Whatever option i've tried i end up with : mounting none on /dev failed: no such file or directory And message complaining that it cannot find the device with uuid ... It's taking my hairs out, if somone has a clue ...

    Read the article

  • How to get hp printer to select correct trays on samba shared printer

    - by dgermann
    My first post here. Clean install of 12.04.1. Previously 10.04. Have been running a p2035n printer without problem. Now, no matter what paper tray I select it prints to the top "by-pass" feeder--not the lower main tray. And when I select to print to manual feed, it does not wait for me to put in paper (like it used to), but prints immediately. The printer is on a samba share and is physically plugged into a WinXP machine. Its uri is smb:///computername/p2035n. I have tried several of the offered drivers for this hp machine, and even tried generic-laser. Same result on all. Here are some other things I have tried (losing 2-3 hours of my time!): hp-check -t reports “error: User needs to be member of group 'lp' to enable print, scan & fax. ” and “warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.” needed to download HPLIP 3.12.11 followed http://hplipopensource.com/hplip-web/install/install/index.html sh hplip-3.12.11-run says that before setup logout and then on login run hp-setup hp-setup could not find the printer ran hp-check -t again, found I was not in group lp ran hp-check --fix and it fixed that problem, asks for reboot rebooted after running update manager (new kernel) and hp-check -t shows no errors this time all the tray selections end up on the bypass tray hp-setup still cannot find the printer So is there a way to make this work? Thanks! :- Doug.

    Read the article

  • Unity Desktop not loading and ccsm method not working

    - by slimy-spork
    I installed Ubuntu 13.04 x86_64 on my HP Pavillion DV7-6c60us. It installs fine and works until I update. I run the software updater and reboot as it requests after. When my computer comes back on I get the desktop background but the rest of the Unity desktop doesn't load. I've tried the ccsm method and re-enabling but it just de-enables itself. I've also tried installing the gnome desktop but that does nothing for me either. I really want to switch to Ubuntu but this is causing issues. P.S. I've also tried using 12.10 and 12.04 with no dice.

    Read the article

  • my application did not show toast mesage when network is not available [closed]

    - by Smart Guy
    my application did no show toast message when network is disable if (position == 2) { final ConnectivityManager connMgr = (ConnectivityManager) getSystemService(Context.CONNECTIVITY_SERVICE); NetworkInfo activeNetworkInfo = connMgr .getActiveNetworkInfo(); android.net.NetworkInfo mobile1 = connMgr.getNetworkInfo(ConnectivityManager.TYPE_MOBILE); if (activeNetworkInfo == null) { Toast.makeText(LoginScreen.this, "No Active Network",Toast.LENGTH_LONG).show(); } else { if (activeNetworkInfo.isConnected()) { btnLogin.setOnClickListener(new OnClickListener() { public void onClick(View view) { String pinemptycheck = pin.getText().toString(); String mobileemptycheck = mobile.getText().toString(); if (pinemptycheck.trim().equals("")||(mobileemptycheck.trim().equals(""))) { Toast.makeText(getApplicationContext(), "Please Enter Correct Information", Toast.LENGTH_LONG).show(); } else { showProgress(); postLoginData(); } } }); } else if (activeNetworkInfo.isConnectedOrConnecting()) { Toast.makeText(LoginScreen.this, "network is Connecting", Toast.LENGTH_LONG) .show(); else if (mobile1.isAvailable()) { btnLogin.setOnClickListener(new OnClickListener() { public void onClick(View view) { showProgress(); postLoginData(); } }); } else if (!mobile1.isAvailable()) { Toast.makeText(LoginScreen.this,"No other Connection Found ",Toast.LENGTH_LONG).show(); btnLogin.setOnClickListener(new OnClickListener() { public void onClick(View v) { Toast.makeText(LoginScreen.this," No other Connection Found", Toast.LENGTH_LONG).show(); } }); }}}

    Read the article

  • How can I correct the paper size (A4) for Canon i560 printer for 12.04?

    - by Peter
    How can I correct the paper size (A4) for Canon i560 printer for 12.04? Canon i560-Paper size error-with printer driver for Ubuntu 12.04 Precise Pangolin offers the same problem, but the answers are not very helpful/elegant to me. Especially the second is far too imprecise and the dimensions for A4 suggested there do not seem to be correct as they do not match with any other (and correctly working) A-Size dimensions. My i560.ppd has for A4 a length of [842] which is then the width for A3 throughout the ppd-file. A3 printouts are fine (So just the way it should be). A4 are not. Cannot figure out why.

    Read the article

  • 3 threads printing numbers of different range

    - by user875036
    This question was asked in an Electronic Arts interview: There are 3 threads. The first thread prints the numbers 1 to 10. The second thread prints the numbers 11 to 20. The third thread prints the numbers from from 21 to 30. Now, all three threads are running. The numbers are printed in an irregular order like 1, 11, 2, 21, 12 etc. If I want numbers to be printed in sorted order like 1, 2, 3, 4..., what should I do with these threads?

    Read the article

  • WIA Automation for scanner color intent is not working

    - by Mike Nicholson
    I cannot get my Canon Pixma MP150 to scan a color scan from c# code. The following code is resulting in a black and white image, or if I change the value of 6146 to 2 then a grayscale image is created. I would like to be able to have a color scan from code. I know the scanner does color images because I can do one through the xp wizard in "scanners and camera". Can anyone help me figure out what value I am not setting for a color scan. All documentation and examples I can find just say to change the value of 6146. Thank you for taking the time to read this! private void ScanAndSaveOnePage () { WIA.CommonDialog Dialog1 = new WIA.CommonDialogClass(); WIA.DeviceManager DeviceManager1 = new WIA.DeviceManagerClass(); System.Object Object1 = null; System.Object Object2 = null; WIA.Device Scanner = null; Scanner = Dialog1.ShowSelectDevice(WIA.WiaDeviceType.ScannerDeviceType, false, false); WIA.Item Item1 = Scanner.Items[1]; setItem(Item1, "6146", 1); setItem(Item1, "6147", 150); setItem(Item1, "6148", 150); setItem(Item1, "6151", 150 * 8.5); setItem(Item1, "6152", 150 * 11); WIA.ImageFile Image1 = new WIA.ImageFile(); WIA.ImageProcess ImageProcess1 = new WIA.ImageProcess(); Object1 = (Object)"Convert"; ImageProcess1.Filters.Add(ImageProcess1.FilterInfos.get_Item(ref Object1).FilterID, 0); Object1 = (Object)"FormatID"; Object2 = (Object)WIA.FormatID.wiaFormatBMP; ImageProcess1.Filters[1].Properties.get_Item(ref Object1).set_Value(ref Object2); Object1 = null; Object2 = null; Image1 = (WIA.ImageFile)Item1.Transfer(WIA.FormatID.wiaFormatBMP); string DestImagePath = @"C:\test.bmp"; File.Delete(DestImagePath); Image1.SaveFile(DestImagePath); } private void setItem (IItem item, object property, object value) { WIA.Property aProperty = item.Properties.get_Item(ref property); aProperty.set_Value(ref value); }

    Read the article

  • Why does Windows spooler require an administrator account?

    - by Software Monkey
    Does anyone know what changes I might need to make to allow restricted users to print using a printer configured for spooling? My Windows XP SP3 system currently requires me to use an Admin account for printing if the printer is configured to spool documents before printing. If the printer is configured for direct printing it works for all accounts. This used to work and some months back it just stopped, and I can't pin down why. The printer, which is an HP PSC 1200 (an old printer) itself is configured for Everyone to have Print authority and my specific (restricted) account to have Full authority, that is Print, Manage Printers and Manager Documents. My HDD is locked down for restricted users given them only read authority to the entire file system except their data directories, which is how I have run my systems for years. I assume there may be a directory somewhere that I need to allow users to write to.

    Read the article

  • Network printer - Print direct or via shared printer on Server?

    - by NickC
    It has occurred to me that a workstation can connect to a printer in two ways: 1). Printing directly to the IP of the printer with the print driver installed locally. 2). Printing to a \Server\Printer1 share with the print queue residing on the server. Question is which way is preferred? I would assume that printing directly to a network printer rather than going through the server would be the most efficient from the point of view of network traffic. On the other hand I guess a server printer share would be easier to manage with the correct driver automatically being downloaded to the workstations. Also what about using GPP (Server2012) to install this printer on the workstations, does that require any specific way?

    Read the article

  • Windows Despooler Requires Administrator to Print

    - by Software Monkey
    Does anyone know what changes I might need to make to allow restricted users to print using a printer configured for spooling? My Windows XP SP3 system currently requires me to use an Admin account for printing if the print is configured to spool documents before printing. If the printer is configured for direct printing it works for all accounts. This used to work and some months back it just stopped, and I can't pin down why. The printer itself is configured for all uses to have complete authority. My system is locked down for restricted users given them only read authority to the entire file system except their data directories, which is how I have run my systems for years. I assume there may be a directory somewhere that I need to allow users to write to.

    Read the article

  • Multi-Page PDF Banner/Poster from PDF

    - by Tim Lytle
    I'm looking for a utility that will take one large sized PDF, and split it into smaller PDFs for banner/poster printing. Looking for a linux or multi-platform solution. More Background My goal is to take an Inkscape document and generate a PDF, then print it on a printer that doesn't do banner/poster printing automatically - so if there's a better solution, I'd be happy to hear that as well. I've found exporting as a PNG both takes a while, and sometimes blends are not preserved. Printing as PDF (Ubuntu print-to-file) seems to work well. I've found utilities that can take large images formats and generate multipage PDFs, but not PDF to PDF.

    Read the article

  • Computer prints blank pages before and after content

    - by Cpt. Jack
    This would seem like a pretty simple question but I have exhausted every idea I can come up with. I bought a brand new Dell Latitude E5410 not too long ago with Windows 7 OS. I installed office 2010 on the machine right away and have had a printing problem since day one. For some reason every time I print a page, a blank page prints out before and after the content print. This also applies to any other application such as notepad or printing an email. If I have a 6 page document, it still prints out one page before and after every content page. Meaning I get my 6 page document along with 12 blank pages. I can't figure out why this would be some sort of default setting or what would cause this printing configuration. I am the only computer on the network that has this problem and quite frankly I'm getting tired of it. Can anyone help me figure this out or steer me in the right direction to correcting this problem?

    Read the article

  • Trouble with Remote Desktop pulling through printers. Drive Redirection works, and the ports created but not the printers

    - by Windex
    I've run out of things to look into. All the support documents have been gone through and still provide no resolution. I've checked the service permissions, (sc sdshow spooler) they all match up with other systems and what is output on the support documents. I'm nearly positive that the issue can't be permissions anyway as the software requires all users to be an administrator, so all users are a local administrator. (I haven't looked into why yet but its on the list, I was just recently brought into this team and we've put procedures in place for quick recovery.) We've applied hot fixes relating to RDS and printing, though I'm not sure which ones they were. I've combed through group policy and no where is printer redirection disabled. It's setup with all default values regarding the use and redirection of printers and a quick install of W2k8 R2 shows that it works by default. This dev install was joined to the same domain, placed in the same OU, shows the same policies applied, etc, etc, etc, The server generates all the correct redirected ports but no printers are created. It will also redirect drives without issue, this would seem to rule out the usermode service that handles redirects being broken. No events are logged related to any of the events and there are no events from the TerminalServices-Printer source. There were local printers setup. I didn't think it would mattter but as I was running out of ideas I tried deleting them all with no change. The TS was configured for the software it will be running before we checked out the redirection of printers so the other team responsible to setting up new servers wants to find a fix instead of reloading a new server. I'm not sure where or what else to look for. Any ideas?

    Read the article

  • Canon MX870 printer only shows "Processing" on the status LCD

    - by Nick
    I had my Canon MX870 installed perfectly fine in 11.10, but since upgrading to 12.04, it no longer works. The printer is recognized in print settings and when I attempt to print a test page, the printer LCD displays a "Processing" message, but then it disappears and nothing happens. Here are my logs (note that printing did not succeed despite the access logs showing success): # /var/log/cups/access_log localhost - - [22/May/2012:12:29:35 -0400] "POST /printers/Canon-MX870 HTTP/1.1" 200 412 Print-Job successful-ok - # /var/log/cups/error_log W [22/May/2012:12:25:51 -0400] failed to CreateProfile: org.freedesktop.ColorManager.AlreadyExists:profile id 'Canon-MX870-Gray..' already exists W [22/May/2012:12:25:51 -0400] failed to CreateProfile: org.freedesktop.ColorManager.AlreadyExists:profile id 'Canon-MX870-RGB..' already exists W [22/May/2012:12:25:51 -0400] failed to CreateDevice: org.freedesktop.ColorManager.AlreadyExists:device id 'cups-Canon-MX870' already exists W [22/May/2012:12:25:51 -0400] failed to CreateProfile: org.freedesktop.ColorManager.AlreadyExists:profile id 'Canon-MX870-Gray..' already exists W [22/May/2012:12:25:51 -0400] failed to CreateProfile: org.freedesktop.ColorManager.AlreadyExists:profile id 'Canon-MX870-RGB..' already exists W [22/May/2012:12:25:51 -0400] failed to CreateDevice: org.freedesktop.ColorManager.AlreadyExists:device id 'cups-Canon-MX870' already exists W [22/May/2012:12:25:51 -0400] failed to CreateProfile: org.freedesktop.ColorManager.AlreadyExists:profile id 'Canon-MX870-Gray..' already exists W [22/May/2012:12:25:51 -0400] failed to CreateProfile: org.freedesktop.ColorManager.AlreadyExists:profile id 'Canon-MX870-RGB..' already exists W [22/May/2012:12:25:51 -0400] failed to CreateDevice: org.freedesktop.ColorManager.AlreadyExists:device id 'cups-Canon-MX870' already exists W [22/May/2012:12:25:51 -0400] failed to CreateProfile: org.freedesktop.ColorManager.AlreadyExists:profile id 'Canon-MX870-Gray..' already exists W [22/May/2012:12:25:51 -0400] failed to CreateProfile: org.freedesktop.ColorManager.AlreadyExists:profile id 'Canon-MX870-RGB..' already exists W [22/May/2012:12:25:51 -0400] failed to CreateDevice: org.freedesktop.ColorManager.AlreadyExists:device id 'cups-Canon-MX870' already exists

    Read the article

  • Lexmark X5650 doesn't print (scanning works)

    - by unor
    I want to use a Lexmark X5650 under Ubuntu. When I connect it via USB, Ubuntu recognizes the device, but can't find a driver. On the Lexmark support site, you can select "Unix/Linux" and then "Ubuntu 9.04", "9.10", "10.04" and "10.10". However, all versions lead to the same driver: lexmark-08z-series-driver-1.0-1.i386.deb.sh.tar.gz (Last updated: 2012-04-13). While installing this driver, the installer asks me to connect the device. As soon as I connect it via USB, Ubuntu now adds the printer automatically. So after the installation completed, I had 2 printers set up. But I can't print anything (I tried it with both printer configurations). Scanning works fine, though. So I guess the driver installation and the device connection are successful. When I try to print something, the print job is listed in the printing queue, but nothing happens. After some time, I get an error message which starts a debug wizard, but in the end it reads something like "Sorry, couldn't find the reason". I had several different error messages (unfortunately, I didn't record them), one was approximately like "printer cannot communicate with computer". Another said that my color ink was low (which is true, but black is full). Another said there was an input/output error. I tried it with Ubuntu 11.10. Because I read that some people had success with 10.04., I installed it in QEMU and installed the driver there, too. Same problem, though. I'd like to upgrade to 12.04, if it should work there for any reason, but I read that for some people this printer stopped working in 12.04 :/ So, it would be best if the printer would work in 12.04. If that's not possible, I'd be fine with starting a QEMU virtual machine with any GNU/Linux distribution that works with my printer.

    Read the article

  • How can I connect my USB (HP) printer in 10.4, which can't be discovered and worked in 9.x

    - by Brian
    My printer was working under 9.x. It is a an hp photosmart C3100 series. When I open the Admin- printing. no local printers are found. I try to add via other (My local choices are Serial and other). I have tried many uri's - ipp://localhost:631/ipp, http://localhost/ipp, localhost, 127.0.0.1, etc... None have worked. Under the networked I have tried JetDirect, using localhost and 127.0.0.1 and port 631. I have tried many options under IPP with different variants in the host trying to verify a printer. No luck. I tried LPD/LPR with localhost and tried the probe. no luck. I tried the cups admin via localhost:631 and that didn't work. On the old version its simply found the local printer, I might have picked the driver, I can't remember but it was the photosmart c3100 series that was working. I just can't get 10.4 to print.

    Read the article

  • Network printer problem with 12.04

    - by G. He
    I had an HP LaserJet 3030 printer connected to an Ubuntu box. It worked fine with 11.10. I was able to print from Ubuntu as well as from Windows and Mac from the home network. About a month or so ago, I upgraded 11.10 to 12.04, then things started to falling apart. My Windows 7 laptop couldn't print to the printer any more. Today, I installed many updates on 12.04, hoping that would fix the printing problem. Unfortunately, it made the situation much worse. Now not only my Windows 7 laptop won't print, my XP desktop won't print either. Every time I print something from the Windows computer, the Ubuntu box logs an error message in /var/log/samba/log.'machineName' as: _spoolss_OpenPrinterEx: Cannot open a printer handle for printer \\server. It is interesting that it uses the server name as the printer, not the \\server\xyzprinter as the printer name. Anyone had a similar problem? Anyway to work around the problem?

    Read the article

  • NHibernate IUserType convert nullable DateTime to DB not-null value

    - by barakbbn
    I have legacy DB that store dates that means no-date as 9999-21-31, The column Till_Date is of type DateTime not-null="true". in the application i want to build persisted class that represent no-date as null, So i used nullable DateTime in C# //public DateTime? TillDate {get; set; } I created IUserType that knows to convert the entity null value to DB 9999-12-31 but it seems that NHibernate doesn't call SafeNullGet, SafeNullSet on my IUserType when the entity value is null, and report a null is used for not-null column. I tried to by-pass it by mapping the column as not-null="false" (changed only the mapping file, not the DB) but it still didn't help, only now it tries to insert the null value to the DB and get ADOException. Any knowledge if NHibernate doesn't support IUseType that convert null to not-null values? Thanks //Implementation public class NullableDateTimeToNotNullUserType : IUserType { private static readonly DateTime MaxDate = new DateTime(9999, 12, 31); public new bool Equals(object x, object y) { //This didn't work as well if (ReferenceEquals(x, y)) return true; //if(x == null && y == null) return false; if (x == null || y == null) return false; return x.Equals(y); } public int GetHashCode(object x) { return x == null ? 0 : x.GetHashCode(); } public object NullSafeGet(IDataReader rs, string[] names, object owner) { var value = rs.GetDateTime(rs.GetOrdinal(names[0])); return (value == MaxDate)? null : value; } public void NullSafeSet(IDbCommand cmd, object value, int index) { var dateValue = (DateTime?)value; var dbValue = (dateValue.HasValue) ? dateValue.Value : MaxDate; ((IDataParameter)cmd.Parameters[index]).Value = dbValue; } public object DeepCopy(object value) { return value; } public object Replace(object original, object target, object owner) { return original; } public object Assemble(object cached, object owner) { return cached; } public object Disassemble(object value) { return value; } public SqlType[] SqlTypes { get { return new[] { NHibernateUtil.DateTime.SqlType }; } } public Type ReturnedType { get { return typeof(DateTime?); } } public bool IsMutable { get { return false; } } } } //Final Implementation with fixes. make the column mapping in hbm.xml not-null="false" public class NullableDateTimeToNotNullUserType : IUserType { private static readonly DateTime MaxDate = new DateTime(9999, 12, 31); public new bool Equals(object x, object y) { //This didn't work as well if (ReferenceEquals(x, y)) return true; //if(x == null && y == null) return false; if (x == null || y == null) return false; return x.Equals(y); } public int GetHashCode(object x) { return x == null ? 0 : x.GetHashCode(); } public object NullSafeGet(IDataReader rs, string[] names, object owner) { var value = NHibernateUtil.Date.NullSafeGet(rs, names[0]); return (value == MaxDate)? default(DateTime?) : value; } public void NullSafeSet(IDbCommand cmd, object value, int index) { var dateValue = (DateTime?)value; var dbValue = (dateValue.HasValue) ? dateValue.Value : MaxDate; NHibernateUtil.Date.NullSafeSet(cmd, valueToSet, index); } public object DeepCopy(object value) { return value; } public object Replace(object original, object target, object owner) { return original; } public object Assemble(object cached, object owner) { return cached; } public object Disassemble(object value) { return value; } public SqlType[] SqlTypes { get { return new[] { NHibernateUtil.DateTime.SqlType }; } } public Type ReturnedType { get { return typeof(DateTime?); } } public bool IsMutable { get { return false; } } } }

    Read the article

  • Stopping windows changing colour scheme

    - by dave
    Windows keeps saying my computer is low on memory and changing the aero scheme to basic its really annoying I have 16gb of ram and 2 3gb 6970 gpu's i have no issues at all with anything expect from this my motherboard has a intel hd onboard gpu i think its something to do with this but all my settings are correct. Is there anyway to tell it not to change it without asking me or to tell it how much memory is too low its driving me mad.

    Read the article

  • Gimp: change one colour to another?

    - by AP257
    Simple to explain: possibly not so simple to do. In Gimp, I have a green button GIF image: it shades from dark green to light green, against a transparent background. I would like to change it to blue, and keep the shading, so it shades from dark blue to light blue. Anyone know how I can do this? Can't find an explanation by Googling! Thanks.

    Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >