Search Results

Search found 19557 results on 783 pages for 'networking programming'.

Page 191/783 | < Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >

• Why can't I access my own web server from my local network?

  - by frenetic

  I have a web server in my home network and I'm using ZoneEdit for dynamic DNS. It's accessible perfectly to everyone outside of my local network, but since I switched to a Gateway 2Wire DSL modem/router I'm unable to use the domain to access the server from my network. I can access it via a local IP or by putting it in my Windows hosts file but this is annoying to do on every computer and for every subdomain. Any idea how I can fix this? Thanks!

  Read the article

• Monitoring bandwidth/latency/jitter between 2 sites?

  - by TheCleaner

  I have 2 sites connected via an MPLS network and I'd like to do the following: setup a host on each end that can "talk" back and forth between each other and somehow report/log what kind of throughput, jitter, latency, etc. they are experiencing between each other in 5 minute intervals. Something similar to Qcheck but that can be automated. Bottom line is I'm trying to determine if the WAN network is "stable" throughout the day or if something is wrong. We have video conferences between these sites and even at 1024kbps calls we are experiencing delays and jitter. I'm hoping to exonerate the network with some testing.

  Read the article

• Chrome browser completely messing with network?

  - by kiasecto

  I have a bizare problem with Google Chrome on a intel core i5 running windows 7 32bit. Whenever chrome is installed, access to other computers in the home group becomes really slow - such as opening shares. Its becomes really slow to resolve windows names. Something goes hay-wire with the local network - pining local machines which is usually 0mS pings I get random timeouts and random successes. Whenever I try to load a local address inside of chrome (including localhost, 192.168.0.1 etc) - it always says something in the status bar about resolving proxy and times out after about 5 seconds, then seems to work fine. If I go to settings inside of chrome, it just brings up the internet explorer connection settings, where I have not set any proxy settings. One I uninstall chrome, all these problems go away. Network shares and name resolvings work instantly, pings to any machines never have a problem. Localhost and other network IP address work fine in all other browsers. Anyone heard of this problem before and know what it might be? I even tried re-installing winodws 7 and the problem came straight back when chrome was loaded on again.

  Read the article

• Ubuntu Wireless card not found

  - by user32121

  Hello all, I'm trying to setup Ubuntu on an old PC. I ran the following command, lspci, in order to get info on the wireless card installed. 00:0a.0 Ethernet controller: Marvell Technology Group Ltd. 88w8335 [Libertas] 802.11b/g Wireless (rev 03) Does anyone know where I can get drivers for this card/chip? And also, how to install (I'm rather new to linux). Also, I'm sure the card is working because I just formatted over xp, and everything was working well. Thanks in advanced!

  Read the article

• Windows redirect traffic to different DNS name not fixed IP address (hosts file equivalent)

  - by Arik Raffael Funke

  Using the Windows hosts file, one can redirect traffic for a domain to a specific IP address, e.g. domainA.com -- 127.0.0.1 I am looking for a SIMPLE way to do the same, but for a target domain name not for a target IP address (as this is dynamic), I.e. domainA.com -- domainB.com Addition: After the getting some initial answers I think I need to concretise my question. Situation: I have an application which looks up the IP of the target domain via DNS and then connects via HTTP to the IP address. I do not have control over any proxy settings. Option 1 Basically I am looking for a way to: intercept DNS requests for a domainA.com launch a DNS request for a domainB.com serve the IP of domainB.com in response to the request for domainA.com Without running an entire DNS server. Option 2 If a DNS server is the only way, in the alternative I would also be happy with an solution to how to define a non-standard DNS-server for a single application. Any ideas for wrapper applications, etc?

  Read the article

• Basic questions about network topologies

  - by laoshanlung

  I have just started learning about network topologies, but there are a lot of confusion about different types of network topologies i have learnt so far. First of all, BUS topology. If i have like 100 PCs in the same wire connected using BUS topology, and the network connection speed is 100Mbps, then each PC will have a connection of 1Mbps, right ? With the same scenario, if i connect those 100 PCs using STAR topology, then each PC will have a connection of 100Mbps ? Then with the TREE topology, i divide the system into 10 sub-system (10 tree branches) , each branch has 10 PCs, then i will have other 10 small "BUS-topology" networks each one will have a connection of 10Mbps and therefore each PC will also have 10Mbps ? And the last one is RING topology, 100 PCs, each PC will have 100Mbps connection ?

  Read the article

• Set 802.1Q tagged port on VLAN1 on Dell PowerConnect switch

  - by Javier

  I'm having big troubles when adding this Dell switch to my network. Here we use several VLANs to segment traffic. All switches (3com and DLink mostly) have configured the same VLANs, most ports are 'untagged' and belong to a single VLAN, except for the ports used to join together the switches (in a star topology), these ports belong to all VLANs and use 802.1Q tags. So far, it works really well. But on this new switch (a Dell PowerConnect 5448), the settings are very different (and confusing). I have configured the same VLANs, an the uplink ports are set in 'general' mode (supposed to be fully 802.1Q compliant), I can set the VLAN membership as 'T' on these ports for all VLANs except VLAN 1. It always stay as 'U' on VLAN 1. Any ideas?

  Read the article

• Ninety-Fifth Percentile Calculation for Bandwidth

  - by Kyle Brandt

  I am trying to calculate the bandwidth of my current internet connection. I am pulling the current input and output transfer rate via snmp. If the argument to the following function is a sorted ascending list of the the some of each input and output sample, is this the right way to calculate 95th percentile? sub ninetyFifth { #Expects Sorted Data my $ninetyFifthLine = (@_ * .95) - 1; return $_[$ninetyFifthLine]; }

  Read the article

• Working WCF WebServices with NLB server

  - by gguth

  Im starting the architecture of a new project using WCF, but im not the right person to make some network considerations, so im doing some research but cannot find the answers to these questions: We´ll host the WCF service in a common Windows Service app in 2 servers and we´ll have another server to make the Load-Balancing job using the WNLB. The fact that we are hosting the WCF in a Windows Service app can disturb the NLB job? Before my research i thought the load balancing was tought to configure, but with NLB it seems to be very simple, its really that simple? Note: The binding will be basicHttpBinding

  Read the article

• Can't get my Raspberry Pi to keep a static IP

  - by JonnyIrving

  I recently got given a Raspberry Pi and I would like to be able to remote into it using puTTy from my laptop so I don't have to sit next to my tv with a keyboard and mouse to use it. I am able to get a puTTy session going when I know the IP address that my router has given the Pi on each session but it keeps changing on each reboot as I would expect. So I followed a number if instruction to go about configuring the RPi to keep a static IP address. This involved changing the file at '/etc/netwrok/interfaces' which now contains (password removed): auto lo iface lo inet loopback iface eth0 inet static address 192.168.1.82 netmask 255.255.255.0 gateway 192.168.1.254 auto wlan0 allow-hotplug wlan0 iface wlan0 inet dhcp wpa-ssid "BeBoxD304BF" wpa-psk "**********" Despite this however, each time I reboot my RPi it gives me a new dynamic IP address still. I also noticed that in the 'ifconfig' output below that the details of the eth0 doesn't contain IP details for inet addr, Bcast or Mask which have been present in all other examples I have seen online. eth0 Link encap:Ethernet HWaddr b8:27:eb:b5:95:da UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 00:87:c6:00:33:77 inet addr:192.168.1.83 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:918 errors:0 dropped:0 overruns:0 frame:0 TX packets:277 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 Also I'm not sure if this is relevant but it can't hurt! The file at '/etc/resolv.conf' contains: domain config search config nameserver 192.168.1.254 ..I heard it might mean something on one of the pages I was looking at. I would be very grateful for any help with this. I have tried everything I can think of and would really like to get this working this weekend so I can use it from work.

  Read the article

• pip install very slow through virtual box

  - by AJP

  pip install --exists-action=w -r requirements.txt is very very slow through virtual box. Any suggests of how to diagnose and fix? Would seeing the VagrantFile be useful? VirtualBox 4.2.12 (can't upgrade to .14 as it doesn't work.) Vagrant 1.0.7 Host machine: ProductName: Mac OS X ProductVersion: 10.7.5 BuildVersion: 11G63b VagrantFile contains: Vagrant::Config.run do |config| config.vm.box = "precise64" config.vm.customize ["modifyvm", :id, "--memory", 2048] config.vm.box_url = "http://files.vagrantup.com/precise64.box" config.vm.network :hostonly, "33.33.33.21" config.vm.forward_port 5000, 5000 config.vm.forward_port 5555, 5555 config.vm.share_folder "v-root", "/vagrant", "./" Vagrant::Config.run do |config| config.vm.provision :shell, :inline => "VENV=/usr/local/venv bash /vagrant/setup_env.sh" end end Normal download speed is only about 5 times slower at 0.8 Mb per second versus 4 MB per second (as judged by curling a 50 Mb file from S3). But pip install is taking about 20 times longer from Mac (i.e. about 40 minutes) versus 2.

  Read the article

• How do I know how many bandwidth an individual application are consuming on Mac OS X?

  - by overboming

  I mean for individual application, if it doesn't provide this kind of functionality.

  Read the article

• Bridging my laptop's wireless and wired adaptors

  - by stacey.richards

  I would like to be able to connect a desktop computer that does not have a wireless adapter to my wireless network. I could just run a network cable from my ADSL/wireless router to the desktop computer but sometimes this is not practical. What I would really like to do is bridge my laptop's wireless and wired adapters in such a way that I can run a network cable from my laptop to a switch and another network cable from the switch to a desktop computer so that the desktop computer can access the Internet through my ADSL/wireless router via my latop: +--------------------+ |ADSL/wireless router| +--------------------+ | +-------------------------+ |laptop's wireless adaptor| | | |laptop's wired adaptor | +-------------------------+ | +------+ |switch| +------+ | +-----------------------+ |desktop's wired adapter| +-----------------------+ A bit of Googling suggests that I can do this by bridging my laptop's wireless and wired adapters. In Windows XP's Network Connections I select both the Local Area Connection and the Wireless Network Connection, right click and select Bridge Connections. From what I gather, this (layer 2?) bridge will examine the MAC address of traffic coming from the wireless network and pass it through to the wired network if it suspects that a network adapter with that MAC address may be on the wired side, and vice-versa. If this is the case, I would assume that when the desktop computer attempts to get an IP address from a DHCP server (which is running on the ADSL/wireless router), it would send a DHCP broadcast packet which would pass through the laptop's bridge to the router and the reply would return through the laptop's bridge back to the desktop. This doesn't happen. With some more Googling I find some instruction how this can be done with Linux. I reboot to Ubuntu 9.10 and type the following: sudo apt-get install bridge-utils sudo brctl addbr br0 sudo brctl addif br0 wlan0 sudo brctl addif br0 eth0 sudo ipconfig wlan0 0.0.0.0 sudo ipconfig eth0 0.0.0.0 Once again, the desktop cannot reach the ADSL/wireless router. I suspect that I'm missing some simple important step. Can anyone shed some light on this for me?

  Read the article

• How to make sure Windows PC is reasonably secure?

  - by Coder

  I'm not much of a network and network security expert, but I need to add an existing Windows PC to a network with always on connection. The problem is, I have no idea if the PC is really clean, and, actually, no knowledge to check it. I scanned the PC with Process Explorer to verify if all running processes are signed, ran an AVG scan, but this is where my knowledge ends. IIRC, there can be bad code attached to svchost or something, bad drivers, and so on, but I have no idea how to check all those things. Reformatting the PC is unfeasible as of now. Are there any suggestions on what I could do?

  Read the article

• What is error 324? Is it related to Google Chrome? Or Verizon Webmail?

  - by Jason Rhodes

  My in-laws are having trouble with signing into their Verizon Webmail account at webmail.verizon.net, only when they are on their wireless network. When they try to log in from wireless they get "Error 324" in the browser, in both Google Chrome and Internet Explorer 8. But they can access any other site, and they can get on their Verizon email when they plug in directly to the browser. Why is this?

  Read the article

• windows server 2008 r2 remote desktop issue with roaming clients

  - by Patrick D'Haese

  I have the following situation : a Dell windows server 2008 R2 computer, with remote desktop services installed. I have installed a java application making use of a PostgreSql database, and made this application available for clients using RDP. Clients are standard Win XP pc's and Psion Neo handheld devices running Windows CE 5 Pro. The application works fine for clients on standard XP pc's connected directly via cat 5E Ethernet cable to a Dell Powerconnect 2816 switch. The Psion Neo clients connect wireless to the network via Motorola AP6532 access points. These access points are connected via a POE adapter to the same switch as the XP pc's. The Psion devices can connect without any problem and very quickly to the server and to the application using RDP. So far, so good. When the Psion devices move around in the warehouse, and they roam from one access point to the other, the RDP session on the client freezes for approx 1 minute, and then it automatically resumes the session. This freezing is very annoying for the users. Can anyone help in solving this issue? Update (August 9) : After re-installing the access points we have a working situation, but only when connecting to the RDP host : * via a Win Xp SP3 laptop * via a Symbol MC9190 Win CE 6 mobile device When roaming we notice a small hick-up less then 1 second, what is very acceptable. With the Psion NEO it's still not working, when roaming the screen freezes from 2 to 30 seconds. The RDP client on the win xp sp3 laptop and the symbol mc9190 is version 6.0. The RDP client on the neo is version 5.2. I have changed the security layer on the RDP host to RDP security layer (based on forums on the internet), because older RDP clients seem to have issues with the RDP 7.1 protocol on the Win server 2088 R2. Psion adviced us to do some network logging activity on the different devices. We made this logging via wireshark, and based on this the conclusion of Psion is that the server fails in handling tcp-requests. Can anyone give me a second opinion by analysing the wireshark loggings. Thanks in advance. Regards Patrick

  Read the article

• hardware addressing and configurable addressing scheme

  - by Zia ur Rahman

  basically i want to ask question about configurable addressing scheme for LAN interface hardware. i have read about it from a book, some main points are given by a configurable addressing scheme provides a mechanism that a customer can use to set a physical address.The mechanism can be manual (the switches that must be set when the interface is first installed).or an electronic memory such as an EPROM that can be downloded from the computer(what does this means). Most hardware needs to be configured only once- configuration is usually done when the hardware is first installed. Question:Suppose a network administrator configures the LAN interface hardware (assigns the address) when he installs it. Now later on if he needs to change the physical address of the device can he change it? Or in this addressing scheme the hardware can only be configured once and we can not reconfigure it later on.

  Read the article

• Router's ssid changes from infrastructure to ad-hoc

  - by waldo

  For a period of time the router's ssid is shown (on various computers) as a normal infrastructure network - computers connect fine and everything works however after a few minutes / hours all computers see the same ssid as an ad-hoc network (not infrastructure). At this point a computer that was already connected continues to work - a computer that isn't cannot connect. Rebooting the router temporarily restores the visibility of the correct infrastructure ssid. Is something interfering? Connecting computers: macbook (2009), iphone 3g, windows vista desktop, windows xp desktop. Details: - D-Link DSL-2740B router set to WPA2-PSK (Personal) - Enable Wireless : Yes - Wireless Network Name (SSID) : ###### - Country : Australia - Wireless Channel : 1 - 802.11 Mode : Mixed 802.11n, 802.11g and 802.11b - Channel Width : Auto 20/40 MHz - Transmission Rate : Best (automatic) - Hide Wireless Network : No - Group Key Update Interval : 0 (seconds)

  Read the article

• i am not able to connect to the application hosted on port 80

  - by shiva

  I am trying to access an application that is hosted on port 80. When i try the url from my personal computer , the site is not reachable but the same url on the server( which hosts the application) i am able to access the site. When i disable the firewall then i am able to access the site from my pc. So there is some rule which is blocking this port. How do i determine what windows firewall rule is blocking this port. I have disables IIS as well. Kindly point me in the right direction

  Read the article

• SSH Tunneling From Mac to Windows Server 2008

  - by 5arx

  I've been using Bitvise Tunnelier for a good few years to get secure access to my home server. This week I've switched to OS X and can't seem to find a nice GUI-based app to allow me to connect SSH/SFTP/Remote Desktop thru an SSH tunnel. Can anyone please advise? I'm not overly keen on the command line... Thanks for reading :-D

  Read the article

• mail server administration

  - by kibs

  MY postfix does not show that it is listening to the smtp daemon getting mesaage below: The message WAS NOT relayed Reporting-MTA: dns; mail.mak.ac.ug Received-From-MTA: smtp; mail.mak.ac.ug ([127.0.0.1]) Arrival-Date: Wed, 19 May 2010 12:45:20 +0300 (EAT) Original-Recipient: rfc822;[email protected] Final-Recipient: rfc822;[email protected] Action: failed Status: 5.4.0 Remote-MTA: dns; 127.0.0.1 Diagnostic-Code: smtp; 554 5.4.0 Error: too many hops Last-Attempt-Date: Wed, 19 May 2010 12:45:20 +0300 (EAT) Final-Log-ID: 23434-08/A38QHg8z+0r7 undeliverable mail MTA BLOCKED OUTPUT FROM lsof -i tcp:25 command master 3014 root 12u IPv4 9429 TCP *:smtp (LISTEN) (Postfix as a user is missing )

  Read the article

• What kind of router do I need to handle multiple external I.P addresses?

  - by user1308743

  I have 3 dedicated I.P addresses going to a location with a few servers, and 1 RVS4000 router. Right now, only one I.P is being used. I would like a router that can use all 3 I.P addresses and I can make rules like this: IP1:80 goes to ServerA IP2:80 goes to ServerB What kind of router/device with what features do I need to handle this? I will need to set 30-40 rules to forward certain ports to certain servers. Only a couple ports will need to go to IP2 or IP3. Thanks

  Read the article

• How to fill in the network line in the ubuntu interfaces config file?

  - by matnagel

  I have to configure an ubuntu hardy server network interface. The service hoster told me that this is the network data for the machine: IP Range: 111.111.200.74 to 111.111.200.78 Netmask: 255.255.255.248 Broadcast: 111.111.200.79 Gateway: 111.111.200.73 Subnet: 111.111.200.72/29 I am only using the first IP address. I will update the /etc/hosts file with 111.111.200.74, but I am still unsure how the /etc/network/interfaces file should be. This is my plan: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 111.111.200.74 netmask 255.255.255.248 network 111.111.200.??? broadcast 111.111.200.79 gateway 111.111.200.73 As you can see I don't know how to build the network line. How would I calculate the data for the network line and what is the result? (I changed the first 2 octets of the subnet, they are not "111.111" in the real setup.)

  Read the article

• Debian can't connect to internet using LAN

  - by tampe125

  I have a headless Raspberry Pi using Debian Wheezy. I have a wifi dongle and if I connect my Raspberry using it, everything works fine: I can connect to the Internet, I can ping, I can update. However, if I get down my wifi and set up the lan interface, I lost my internet connection. I still can connect locally, using my laptop, but the connection doesn't exit (ie ping is not working). Some useful info: cat /etc/network/interfaces auto lo auto eth0 iface eth0 inet static address 192.168.0.105 netmask 255.255.255.0 gateway 192.168.0.1 ping www.google.com (nothing request timed out) ifconfig eth0 Link encap:Ethernet HWaddr b8:27:eb:a2:b5:20 inet addr:192.168.0.105 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1130 errors:0 dropped:0 overruns:0 frame:0 TX packets:1116 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:97223 (94.9 KiB) TX bytes:146140 (142.7 KiB) ping 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. ^C --- 192.168.0.1 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18007ms cat /etc/resolv.conf nameserver 8.8.8.8 netstat -r Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface default 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 192.168.0.0 * 255.255.255.0 U 0 0 0 eth0 well, I think that's all... Any ideas?

  Read the article

• Debian can't connect to internet using LAN

  - by tampe125

  I have a headless Raspberry Pi using Debian Wheezy. I have a wifi dongle and if I connect my Raspberry using it, everything works fine: I can connect to the Internet, I can ping, I can update. However, if I get down my wifi and set up the lan interface, I lost my internet connection. I still can connect to it locally, using my laptop, but the connection doesn't exit (ie ping is not working). Some useful info: cat /etc/network/interfaces auto lo auto eth0 iface eth0 inet static address 192.168.0.105 netmask 255.255.255.0 gateway 192.168.0.1 ping www.google.com (nothing request timed out) ifconfig eth0 Link encap:Ethernet HWaddr b8:27:eb:a2:b5:20 inet addr:192.168.0.105 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1130 errors:0 dropped:0 overruns:0 frame:0 TX packets:1116 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:97223 (94.9 KiB) TX bytes:146140 (142.7 KiB) ping 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. ^C --- 192.168.0.1 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18007ms cat /etc/resolv.conf nameserver 8.8.8.8 netstat -r Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface default 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 192.168.0.0 * 255.255.255.0 U 0 0 0 eth0 well, I think that's all... Any ideas?

  Read the article

< Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >