Search Results

Search found 6137 results on 246 pages for 'forward mails'.

Page 193/246 | < Previous Page | 189 190 191 192 193 194 195 196 197 198 199 200  | Next Page >

• Employee Info Starter Kit: Project Mission

  - by Mohammad Ashraful Alam

  Employee Info Starter Kit is an open source ASP.NET project template that is intended to address different types of real world challenges faced by web application developers when performing common CRUD operations. Using a single database table ‘Employee’, it illustrates how to utilize Microsoft ASP.NET 4.0, Entity Framework 4.0 and Visual Studio 2010 effectively in that context. Employee Info Starter Kit is highly influenced by the concept ‘Pareto Principle’ or 80-20 rule. where it is targeted to enable a web developer to gain 80% productivity with 20% of effort with respect to learning curve and production. User Stories The user end functionalities of this starter kit are pretty simple and straight forward that are focused in to perform CRUD operation on employee records as described below. Creating a new employee record Read existing employee record Update an existing employee record Delete existing employee records Key Technology Areas ASP.NET 4.0 Entity Framework 4.0 T-4 Template Visual Studio 2010 Architectural Objective There is no universal architecture which can be considered as the best for all sorts of applications around the world. Based on requirements, constraints, environment, application architecture can differ from one to another. Trade-off factors are one of the important considerations while deciding a particular architectural solution. Employee Info Starter Kit is highly influenced by the concept ‘Pareto Principle’ or 80-20 rule, where it is targeted to enable a web developer to gain 80% productivity with 20% of effort with respect to learning curve and production. “Productivity” as the architectural objective typically also includes other trade-off factors as well as, such as testability, flexibility, performance etc. Fortunately Microsoft .NET Framework 4.0 and Visual Studio 2010 includes lots of great features that have been implemented cleverly in this project to reduce these trade-off factors in the minimum level. Why Employee Info Starter Kit is Not a Framework? Application frameworks are really great for productivity, some of which are really unavoidable in this modern age. However relying too many frameworks may overkill a project, as frameworks are typically designed to serve wide range of different usage and are less customizable or editable. On the other hand having implementation patterns can be useful for developers, as it enables them to adjust application on demand. Employee Info Starter Kit provides hundreds of “connected” snippets and implementation patterns to demonstrate problem solutions in actual production environment. It also includes Visual Studio T-4 templates that generate thousands lines of data access and business logic layer repetitive codes in literally few seconds on the fly, which are fully mock testable due to language support for partial methods and latest support for mock testing in Entity Framework. Why Employee Info Starter Kit is Different than Other Open-source Web Applications? Software development is one of the rapid growing industries around the globe, where the technology is being updated very frequently to adapt greater challenges over time. There are literally thousands of community web sites, blogs and forums that are dedicated to provide support to adapt new technologies. While some are really great to enable learning new technologies quickly, in most cases they are either too “simple and brief” to be used in real world scenarios or too “complex and detailed” which are typically focused to achieve a product goal (such as CMS, e-Commerce etc) from "end user" perspective and have a long duration learning curve with respect to the corresponding technology. Employee Info Starter Kit, as a web project, is basically "developer" oriented which actually considers a hybrid approach as “simple and detailed”, where a simple domain has been considered to intentionally illustrate most of the architectural and implementation challenges faced by web application developers so that anyone can dive into deep into the corresponding new technology or concept quickly. Roadmap Since its first release by 2008 in MSDN Code Gallery, Employee Info Starter Kit gained a huge popularity in ASP.NET community and had 1, 50,000+ downloads afterwards. Being encouraged with this great response, we have a strong commitment for the community to provide support for it with respect to latest technologies continuously. Currently hosted in Codeplex, this community driven project is planned to have a wide range of individual editions, each of which will be focused on a selected application architecture, framework or platform, such as ASP.NET Webform, ASP.NET Dynamic Data, ASP.NET MVC, jQuery Ajax (RIA), Silverlight (RIA), Azure Service Platform (Cloud), Visual Studio Automated Test etc. See here for full list of current and future editions.

  Read the article

• Silverlight Cream for December 27, 2010 -- #1016

  - by Dave Campbell

  In this Issue: Sacha Barber, David Anson, Jesse Liberty, Shawn Wildermuth, Jeff Blankenburg(-2-), Martin Krüger, Ryan Alford(-2-), Michael Crump, Peter Kuhn(-2-). Above the Fold: Silverlight: "Part 4 of 4 : Tips/Tricks for Silverlight Developers" Michael Crump WP7: "Navigating with the WebBrowser Control on WP7" Shawn Wildermuth Shoutouts: John Papa posted that the open call is up for MIX11 presenters: Your Chance to Speak at MIX11 From SilverlightCream.com: Aspect Examples (INotifyPropertyChanged via aspects) If you're wanting to read a really in-depth discussion of aspect oriented programming (AOP), check out the article Sacha Barber has up at CodeProject discussing INPC via aspects. How to: Localize a Windows Phone 7 application that uses the Windows Phone Toolkit into different languages David Anson has a nice tutorial up on localizing your WP7 app, including using the Toolkit and controls such as DatePicker... remember we're talking localized Windows Phone From Scratch – Animation Part 1 Jesse Liberty continues in his 'From Scratch' series with this first post on WP7 Animation... good stuff, Jesse! Navigating with the WebBrowser Control on WP7 In building his latest WP7 app, Shawn Wildermuth ran into some obscure errors surrounding browser.InvokeScript. He lists the simple solution and his back, refresh, and forward button functionality for us. What I Learned In WP7 – Issue #7 In the time I was out, Jeff Blankenburg got ahead of me, so I'll catch up 2 at a time... in this number 7 he discusses making videos of your apps, links to the Learn Visual Studio series, and his new website What I Learned In WP7 – Issue #8 Jeff Blankenburg's number 8 is a very cool tip on using the return key on the keyboard to handle the loss of focus and handling of text typed into a textbox. Resize of a grid by using thumb controls Martin Krüger has a sample in the Expression Gallery of a grid that is resizable by using 'thumb controls' at the 4 corners... all source, so check it out! Silverlight 4 – Productivity Power Tools and EF4 Ryan Alford found a very interesting bug associated with EF4 and the Productivity Power Tools, and the way to get out of it is just weird as well. Silverlight 4 – Toolkit and Theming Ryan Alford also had a problem adding a theme from the Toolkit, and what all you might have to do to get around this one.... Part 4 of 4 : Tips/Tricks for Silverlight Developers. Michael Crump has part 4 of his series on Silverlight Development tips and tricks. This is numbers 16 through 20 and covers topics such as Version information, Using Lambdas, Specifying a development port, Disabling ChildWindow Close button, and XAML cleanup. The XML content importer and Windows Phone 7 Peter Kuhn wanted to use the XML content inporter with a WP7 app and ran into problems implementing the process and a lack of documentation as well... he pounded through it all and has a class he's sharing for loading sounds via XML file settings. WP7 snippet: analyzing the hyperlink button style In a second post, Peter Kuhn responds to a forum discussion about the styles for the hyperlink button in WP7 and why they're different than SL4 ... and styles-to-go to get all the hyperlink goodness you want... wrapped text, or even non-text content. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Using the SOA-BPM VIrtualBox Appliance

  - by antony.reynolds

  Quickstart Guide to Using Oracle Appliance for SOA/BPM Recently I have been setting up some machines for fellow engineers.  My base setup consists of Oracle Enterprise Linux with Oracle Virtual Box.  Note that after installing VirtualBox I needed to add the VirtualBox Extension Pack to enable RDP access amongst other features.  In order to get them started quickly with some images I downloaded the pre-built appliance for SOA/BPM from OTN. Out of the box this provides a VirtualBox image that is pre-installed with everything you will need to develop SOA/BPM applications. Specifically by using the virtual appliance I got the following pre-installed and configured. Oracle Enterprise Linux 5 User oracle password oracle User root password oracle. Oracle Database XE Pre-configured with SOA/BPM repository. Set to auto-start on OS startup. Oracle SOA Suite 11g PS2 Configured with a “collapsed domain”, all services (SOA/BAM/EM) running in AdminServer. Listening on port 7001 Oracle BPM Suite 11g Configured in same domain as SOA Suite. Oracle JDeveloper 11g With SOA/BPM extensions. Networking The VM by default uses NAT (Network Address Translation) for network access.  Make sure that the advanced settings for port forwarding allow access through the host to guest ports.  It should be pre-configured to forward requests on the following ports Purpose Host Port Guest Port (VBox Image) SSH 2222 22 HTTP 7001 7001 Database 1521 1521 Note that only one VirtualBox image can use a given host port, so make sure you are not clashing if it seems not to work. What’s Left to Do? There is still some customization of the environment that may be required. If you need to configure a proxy server as I did then for the oracle and root users to set up an HTTP proxy Added “export http_proxy=http://proxy-host:proxy-port” to ~oracle/.bash_profile and ~root/.bash_profile Added “export http_proxy=http://proxy-host:proxy-port” to /etc/.bashrc Edited System->Preferences to set Network Proxy In Firefox set Preferences->Network->Connection Settings to “Use system proxy settings” In JDeveloper set Edit->Preferences->Web Browser and Proxy to required proxy settings You may need to configure yum to point to a public OEL yum repository – such as http://public-yum.oracle.com. If you are going to be accessing the SOA server from outside the VirtualBox image then you may want to set the soa-infra Server URLs to be the hostname of the host OS. Snap! Once I had the machine configured how I wanted to use it I took a snapshot so that I can always get back to the pristine install I have now.  Snapshots are one of the big benefits of putting a development environment into a virtualized environment.  I can make changes to my installation and if I mess it up I can restore the image to a last known good snapshot. Hey Presto!, Ready to Go This is the quickest way to get up and running with SOA/BPM Suite.  Out of the box the download will work, I only did extra customization so I could use services outside the firewall and browse outside the firewall from within by SOA VirtualBox image.  I also use yum to update the OS to the latest binaries. So have fun.

  Read the article

• Page output caching for dynamic web applications

  - by Mike Ellis

  I am currently working on a web application where the user steps (forward or back) through a series of pages with "Next" and "Previous" buttons, entering data until they reach a page with the "Finish" button. Until finished, all data is stored in Session state, then sent to the mainframe database via web services at the end of the process. Some of the pages display data from previous pages in order to collect additional information. These pages can never be cached because they are different for every user. For pages that don't display this dynamic data, they can be cached, but only the first time they load. After that, the data that was previously entered needs to be displayed. This requires Page_Load to fire, which means the page can't be cached at that point. A couple of weeks ago, I knew almost nothing about implementing page caching. Now I still don't know much, but I know a little bit, and here is the solution that I developed with the help of others on my team and a lot of reading and trial-and-error. We have a base page class defined from which all pages inherit. In this class I have defined a method that sets the caching settings programmatically. For pages that can be cached, they call this base page method in their Page_Load event within a if(!IsPostBack) block, which ensures that only the page itself gets cached, not the data on the page. if(!IsPostBack) {     ...     SetCacheSettings();     ... } protected void SetCacheSettings() {     Response.Cache.AddValidationCallback(new HttpCacheValidateHandler(Validate), null);     Response.Cache.SetExpires(DateTime.Now.AddHours(1));     Response.Cache.SetSlidingExpiration(true);     Response.Cache.SetValidUntilExpires(true);     Response.Cache.SetCacheability(HttpCacheability.ServerAndNoCache); } The AddValidationCallback sets up an HttpCacheValidateHandler method called Validate which runs logic when a cached page is requested. The Validate method signature is standard for this method type. public static void Validate(HttpContext context, Object data, ref HttpValidationStatus status) {     string visited = context.Request.QueryString["v"];     if (visited != null && "1".Equals(visited))     {         status = HttpValidationStatus.IgnoreThisRequest; //force a page load     }     else     {         status = HttpValidationStatus.Valid; //load from cache     } } I am using the HttpValidationStatus values IgnoreThisRequest or Valid which forces the Page_Load event method to run or allows the page to load from cache, respectively. Which one is set depends on the value in the querystring. The value in the querystring is set up on each page in the "Next" and "Previous" button click event methods based on whether the page that the button click is taking the user to has any data on it or not. bool hasData = HasPageBeenVisited(url); if (hasData) {     url += VISITED; } Response.Redirect(url); The HasPageBeenVisited method determines whether the destination page has any data on it by checking one of its required data fields. (I won't include it here because it is very system-dependent.) VISITED is a string constant containing "?v=1" and gets appended to the url if the destination page has been visited. The reason this logic is within the "Next" and "Previous" button click event methods is because 1) the Validate method is static which doesn't allow it to access non-static data such as the data fields for a particular page, and 2) at the time at which the Validate method runs, either the data has not yet been deserialized from Session state or is not available (different AppDomain?) because anytime I accessed the Session state information from the Validate method, it was always empty.

  Read the article

• Oracle and Partners release CAMP specification for PaaS Management

  - by macoracle

  Cloud Application Management for Platforms The public release of the Cloud Application Management for Platforms (CAMP) specification, an initial draft of what is expected to become an industry standard self service interface specification for Platform as a Service (PaaS) management, represents a significant milestone in cloud standards development. Created by several players in the emerging cloud industry, including Oracle, the specification is being submitted to the OASIS standards organization (draft charter) where it will be finalized in an open development process. CAMP is targeted at application developers and deployers for self service management of their application on a Platform-as-a-Service cloud. It is closely aligned with the application development process where applications are typically developed in an Application Development Environment (ADE) and then deployed into a private or public platform cloud. CAMP standardizes the model behind an application’s dependencies on platform components and provides a standardized format for moving applications between the ADE and the cloud, and if and when desirable, between clouds. Once an application is deployed, CAMP provides users with a standardized self service interface to the PaaS offering, allowing the cloud consumer to manage the lifecycle of the application on that platform and the use of the underlying platform services. The CAMP interface includes a RESTful binding of the CAMP model onto the standard HTTP protocol, using JSON as the encoding for the model resources. The model for CAMP includes resources that represent the Application, its Components and any Platform Components that they depend on. It's important PaaS Cloud consumers understand that for a PaaS cloud, these are the abstractions that the user would prefer to work with, not Virtual Machines and the various resources such as compute power, storage and networking. PaaS cloud consumers would also not like to become system administrators for the infrastructure that is hosting their applications and component services. CAMP works on this more abstract level, and yet still accommodates platforms that are built using an underlying infrastructure cloud. With CAMP, it is up to the cloud provider whether or not this underlying infrastructure is exposed to the consumer. One major challenge addressed by the CAMP specification is that of ensuring that application deployment on a new platform is as seamless and error free as possible. This becomes even more difficult when the application may have been developed for a different platform and is now moving to a new one. In CAMP this is accomplished by matching the requirements of the application and its components to the specific capabilities of the underlying platform. This needs to be done regardless of whether there are existing pools of virtualized platform resources (such as a database pool) which are provisioned(on the basis of a schema for example), or whether the platform component is really just a set of virtual machines drawn from an infrastructure pool. The interoperability between platform clouds that CAMP offers means that a CAMP client such as an ADE can target multiple clouds with a single common interface. Applications can even be spread across multiple platform clouds and then managed without needing to create a specialized adapter to manage the components running in each cloud. The development of CAMP has been an effort by a small set of companies, but there are significant advantages to this approach. For example, the way that each of these companies creates their platforms is different enough, to ensure that CAMP can cover a wide range of actual deployments. CAMP is now entering the next phase of development under the guidance of an open standards organization, OASIS, which will likely broaden it’s capabilities. We hope is to keep it concise and minimal, however, to ease implementation and adoption. Over time there will be many different types of platform components that applications can use and which need management. CAMP at this point only includes one example of this (in an appendix) – DataBase as a Service. I am looking forward to the start of the CAMP Technical Committee in OASIS and will do my best to ensure a successful development process. Hope to see you there.

  Read the article

• Agile Manifesto, Revisited

  - by GeekAgilistMercenary

  Again, conversations give me a zillion things to write about.  The recent conversation that has cropped up again is my various viewpoints of the Agile Manifesto.  Not all the processes that came after the manifesto was written, but just the core manifesto itself.  Just for context, here is the manifesto in all the glory. We are uncovering better ways of developing software by doing it and helping others do it. Through this work we have come to value: Individuals and interactions over processes and tools Working software over comprehensive documentation Customer collaboration over contract negotiation Responding to change over following a plan That is, while there is value in the items on the right, we value the items on the left more. Several of the key signatories at the time went on to write some of the core books that really gave Agile Software Development traction.  If you check out the Agile Manifesto Site and do a search for any of those people, you will find a treasure trove of software development information. My 2 Cents First off, I agree with a few people out there.  Agile is not Scrum for instance.  Do NOT get these things confused when checking out Agile, or pushing forward with Scrum.  As David Starr points out in his blog entry, "About 35 minutes into this discussion, I realized I hadn?t heard a question or comment that wasn?t related to Scrum. I asked the room, ?How many people are on an agile team that is NOT using Scrum?? 5 hands. Seriously, out of about 150 people of so. 5 hands." So know, as this is one of my biggest pet peves these days, that Scrum is not Agile.  Another quote David writes, "I assure you, dear reader, 2 week time boxes does not an agile team make." This is the exact problem.  Take a look at the actual manifesto above.  First ideal, "Individuals and interactions over processes and tools".  There are a couple of meanings in this ideal, just as there are in the other written ideals.  But this one has a lot of contention with a set practice such as Scrum.  There are other formulas, namely XP (eXtreme) and Kanban are two that come to mind often.  But none of these are Agile, but instead a process based on the ideals of Agile. Some of you may be thinking, "that?s the same thing".  Well, no, it is not.  This type of differentiation is vitally important.  Agile is a set of ideals.  Processes are nice, but they can change, they may work for some and not others.  The Agile Manifesto covers the ideals behind what is intended, that intention being to learn and find new ways to build better software. Ideals, not processes.  Definition versus implementation.  Class versus object.  The ideals are of utmost importance, the processes are secondary, the first ideal is what really lays this out for me "Individuals and interactions over processes and tools".  Yes, we need tools but we need the individuals and their interactions more. For those coming into a development team, I hope you take this to mind.  It is of utmost importance that this differentiation is known and fought for.  The second the process becomes more important than the individuals and interactions, the team will effectively lose the advantages of Agile Ideals. This is just one of my first thoughts on the topic of Agile.  I will be writing more in the near future about each of the ideals.  I will make a point to outline more of my thoughts, my opinions, and experience with the ideals of Agile and the various processes that are out there.  Maybe, I may stumble upon something new with the help of my readers?  It would be a grand overture to the ideals I hold. For the original entry, check out my personal blog with other juicy tech tidbits, rants, raves, and the like. Agilist Mercenary

  Read the article

• Pondering New Technology

  - by MOSSLover

  So I have been standing at the end of a fork for a year peering down a corner looking at this way and that way trying to figure out where I fit in.  I was so enthusiastic and excited about Silverlight when it came out.  It was this amazing awesome technology that had this really cool animation and webcam/multimedia piece.  I thought if I put my money on Silverlight it’s going somewhere, then HTML 5 came out and the wind shifted.  I realized times were changing. I have been working with web technologies since I was 15 years old.  Playing with html and javascript and even css back when it first came out.  In tech years 15 years is forever.  Things change so quickly and so often.  So I guess the question is where am I heading?  The answer is mobile technology.  For some reason I was resisting change and I have no idea why.  I guess I really wanted to see more than one player.  I didn’t quite feel that Microsoft was ready with Windows Phone 7.  It was a great start, but it just didn’t feel like they went all the way.  Now with Windows 8 it feels like they are at version 2.0.  It’s like hitting Silverlight 2.0 where they finally added the .Net bits.  The path is paved, but we don’t know where it’s leading.  Then we had 3.0, 4.0, and 5.0 to mature the technology into what it is today (man I’m hoping they are going to roll some of the cool bits into other tech if they don’t exist). Anyway, I’m on board, but I’m not buying a Windows Tablet just yet.  I was hoping for a 7 inch screen from Apple around $300 or just above and a 7 inch screen from the MS side around the same price.  What I got was the Apple side, but nothing from Microsoft.  I was pretty disappointed with the $500 market price on the RT version.  I realized Microsoft is close, but not quite where Apple is today.  Yes the devices have Office that they are offering, but the sticker is just too much for a first generation device.  If you guys remember correctly the first generation iPad was quite expensive.  I guess for a 1st generation device $500 is pretty good. So I guess what I’m trying to say is that I am shifting my focus entirely away from Silverlight and more towards mobile.  I will be doing a lot of postings on iOS, Windows 8, and Windows Phone 8 with SharePoint 2013.  Since I don’t have a tablet and don’t foresee myself buying one just yet it might be mostly on the phones for right now.  I want to do a bunch of testing on various devices on what needs to be done in apps on each device.  I might add a bit on porting code from one to the other.  I think it’s going to be a lot of fun and make things flow a little better for me.  In a way it’s kind of like Star Trek 6 where they talk about the Undiscovered Country.  I’m going to jump forward completely and see where I land. Technorati Tags: SharePoint 2013,Mobile,Windows 8,iOS

  Read the article

• Windows could not start Apache 2 on the local computer

  - by andig

  After installing PHP 5.3, Windows is unable to start Apache 2.2. Apache's error log is empty, no error message on startup: C:\Programme\Apache\bin>httpd -k start C:\Programme\Apache\bin>httpd -k stop The Apache2.2 service is not started. C:\Programme\Apache\bin>httpd -k config Reconfiguring the Apache2.2 service The Apache2.2 service is successfully installed. Testing httpd.conf.... Errors reported here must be corrected before the service can be started. I have no clue where to look for the cause. php5apache2_2.dll is copied to the Apache modules folder. The configuration looks like this: LoadModule php5_module modules/php5apache2_2.dll PHPIniDir "C:/programme/php" Where and how can I start diagnosis? The only hint I have so far is that startup fails as soon as a PHP module is enabled in the configuration. Is there a way to get more details out of the Apache startup process? This is the http.conf: # # This is the main Apache HTTP server configuration file. It contains the # configuration directives that give the server its instructions. # See <URL:http://httpd.apache.org/docs/2.2> for detailed information. # In particular, see # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html> # for a discussion of each configuration directive. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "logs/foo.log" # with ServerRoot set to "C:/Programme/Apache" will be interpreted by the # server as "C:/Programme/Apache/logs/foo.log". # # NOTE: Where filenames are specified, you must use forward slashes # instead of backslashes (e.g., "c:/apache" instead of "c:\apache"). # If a drive letter is omitted, the drive on which httpd.exe is located # will be used by default. It is recommended that you always supply # an explicit drive letter in absolute paths to avoid confusion. # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # Do not add a slash at the end of the directory path. If you point # ServerRoot at a non-local disk, be sure to point the LockFile directive # at a local disk. If you wish to share the same ServerRoot for multiple # httpd daemons, you will need to change at least LockFile and PidFile. # ServerRoot "C:/Programme/Apache" # # Listen: Allows you to bind Apache to specific IP addresses and/or # ports, instead of the default. See also the <VirtualHost> # directive. # # Change this to Listen on specific IP addresses as shown below to # prevent Apache from glomming onto all bound IP addresses. # #Listen 12.34.56.78:80 Listen 80 # # Dynamic Shared Object (DSO) Support # # To be able to use the functionality of a module which was built as a DSO you # have to place corresponding `LoadModule' lines at this location so the # directives contained in it are actually available _before_ they are used. # Statically compiled modules (those listed by `httpd -l') do not need # to be loaded here. # # Example: # LoadModule foo_module modules/mod_foo.so # LoadModule actions_module modules/mod_actions.so LoadModule alias_module modules/mod_alias.so LoadModule asis_module modules/mod_asis.so LoadModule auth_basic_module modules/mod_auth_basic.so #LoadModule auth_digest_module modules/mod_auth_digest.so #LoadModule authn_alias_module modules/mod_authn_alias.so #LoadModule authn_anon_module modules/mod_authn_anon.so #LoadModule authn_dbd_module modules/mod_authn_dbd.so #LoadModule authn_dbm_module modules/mod_authn_dbm.so LoadModule authn_default_module modules/mod_authn_default.so LoadModule authn_file_module modules/mod_authn_file.so #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so #LoadModule authz_dbm_module modules/mod_authz_dbm.so LoadModule authz_default_module modules/mod_authz_default.so LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule authz_host_module modules/mod_authz_host.so #LoadModule authz_owner_module modules/mod_authz_owner.so LoadModule authz_user_module modules/mod_authz_user.so LoadModule autoindex_module modules/mod_autoindex.so #LoadModule cache_module modules/mod_cache.so #LoadModule cern_meta_module modules/mod_cern_meta.so LoadModule cgi_module modules/mod_cgi.so #LoadModule charset_lite_module modules/mod_charset_lite.so #LoadModule dav_module modules/mod_dav.so #LoadModule dav_fs_module modules/mod_dav_fs.so #LoadModule dav_lock_module modules/mod_dav_lock.so #LoadModule dbd_module modules/mod_dbd.so #LoadModule deflate_module modules/mod_deflate.so LoadModule dir_module modules/mod_dir.so #LoadModule disk_cache_module modules/mod_disk_cache.so #LoadModule dumpio_module modules/mod_dumpio.so LoadModule env_module modules/mod_env.so #LoadModule expires_module modules/mod_expires.so #LoadModule ext_filter_module modules/mod_ext_filter.so #LoadModule file_cache_module modules/mod_file_cache.so #LoadModule filter_module modules/mod_filter.so #LoadModule headers_module modules/mod_headers.so #LoadModule ident_module modules/mod_ident.so #LoadModule imagemap_module modules/mod_imagemap.so LoadModule include_module modules/mod_include.so #LoadModule info_module modules/mod_info.so LoadModule isapi_module modules/mod_isapi.so #LoadModule ldap_module modules/mod_ldap.so #LoadModule logio_module modules/mod_logio.so LoadModule log_config_module modules/mod_log_config.so #LoadModule log_forensic_module modules/mod_log_forensic.so #LoadModule mem_cache_module modules/mod_mem_cache.so LoadModule mime_module modules/mod_mime.so #LoadModule mime_magic_module modules/mod_mime_magic.so LoadModule negotiation_module modules/mod_negotiation.so #LoadModule proxy_module modules/mod_proxy.so #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so #LoadModule proxy_connect_module modules/mod_proxy_connect.so #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so #LoadModule proxy_http_module modules/mod_proxy_http.so #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so #LoadModule reqtimeout_module modules/mod_reqtimeout.so #LoadModule rewrite_module modules/mod_rewrite.so LoadModule setenvif_module modules/mod_setenvif.so #LoadModule speling_module modules/mod_speling.so #LoadModule ssl_module modules/mod_ssl.so #LoadModule status_module modules/mod_status.so #LoadModule substitute_module modules/mod_substitute.so #LoadModule unique_id_module modules/mod_unique_id.so #LoadModule userdir_module modules/mod_userdir.so #LoadModule usertrack_module modules/mod_usertrack.so #LoadModule version_module modules/mod_version.so #LoadModule vhost_alias_module modules/mod_vhost_alias.so #!! LoadModule php5_module modules/php5apache2_2.dll PHPIniDir "C:/programme/php" <IfModule !mpm_netware_module> <IfModule !mpm_winnt_module> # # If you wish httpd to run as a different user or group, you must run # httpd as root initially and it will switch. # # User/Group: The name (or #number) of the user/group to run httpd as. # It is usually good practice to create a dedicated user and group for # running httpd, as with most system services. # User daemon Group daemon </IfModule> </IfModule> # 'Main' server configuration # # The directives in this section set up the values used by the 'main' # server, which responds to any requests that aren't handled by a # <VirtualHost> definition. These values also provide defaults for # any <VirtualHost> containers you may define later in the file. # # All of these directives may appear inside <VirtualHost> containers, # in which case these default settings will be overridden for the # virtual host being defined. # # # ServerAdmin: Your address, where problems with the server should be # e-mailed. This address appears on some server-generated pages, such # as error documents. e.g. [email protected] # ServerAdmin [email protected] # # ServerName gives the name and port that the server uses to identify itself. # This can often be determined automatically, but we recommend you specify # it explicitly to prevent problems during startup. # # If your host doesn't have a registered DNS name, enter its IP address here. # #ServerName localhost:8080 # # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests are taken from this directory, but # symbolic links and aliases may be used to point to other locations. # DocumentRoot "C:/data/htdocs" # # Each directory to which Apache has access can be configured with respect # to which services and features are allowed and/or disabled in that # directory (and its subdirectories). # # First, we configure the "default" to be a very restrictive set of # features. # <Directory /> Options FollowSymLinks AllowOverride None Order deny,allow Deny from all </Directory> # # Note that from this point forward you must specifically allow # particular features to be enabled - so if something's not working as # you might expect, make sure that you have specifically enabled it # below. # # # This should be changed to whatever you set DocumentRoot to. # <Directory "C:/data/htdocs"> # # Possible values for the Options directive are "None", "All", # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # # The Options directive is both complicated and important. Please see # http://httpd.apache.org/docs/2.2/mod/core.html#options # for more information. # Options Indexes FollowSymLinks # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # Options FileInfo AuthConfig Limit # AllowOverride None # # Controls who can get stuff from this server. # Order allow,deny Allow from all </Directory> # # DirectoryIndex: sets the file that Apache will serve if a directory # is requested. # <IfModule dir_module> DirectoryIndex index.html </IfModule> # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <FilesMatch "^\.ht"> Order allow,deny Deny from all Satisfy All </FilesMatch> # # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog "logs/error.log" # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel debug <IfModule log_config_module> # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common <IfModule logio_module> # You need to enable mod_logio.c to use %I and %O LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule> # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a <VirtualHost> # container, they will be logged here. Contrariwise, if you *do* # define per-<VirtualHost> access logfiles, transactions will be # logged therein and *not* in this file. # CustomLog "logs/access.log" common # # If you prefer a logfile with access, agent, and referer information # (Combined Logfile Format) you can use the following directive. # #CustomLog "logs/access.log" combined </IfModule> <IfModule alias_module> # # Redirect: Allows you to tell clients about documents that used to # exist in your server's namespace, but do not anymore. The client # will make a new request for the document at its new location. # Example: # Redirect permanent /foo http://localhost/bar # # Alias: Maps web paths into filesystem paths and is used to # access content that does not live under the DocumentRoot. # Example: # Alias /webpath /full/filesystem/path # # If you include a trailing / on /webpath then the server will # require it to be present in the URL. You will also likely # need to provide a <Directory> section to allow access to # the filesystem path. # # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases, except that # documents in the target directory are treated as applications and # run by the server when requested rather than as documents sent to the # client. The same rules about trailing "/" apply to ScriptAlias # directives as to Alias. # ScriptAlias /cgi-bin/ "C:/Programme/Apache/cgi-bin/" </IfModule> <IfModule cgid_module> # # ScriptSock: On threaded servers, designate the path to the UNIX # socket used to communicate with the CGI daemon of mod_cgid. # #Scriptsock logs/cgisock </IfModule> # # "C:/Programme/Apache/cgi-bin" should be changed to whatever your ScriptAliased # CGI directory exists, if you have that configured. # <Directory "C:/Programme/Apache/cgi-bin"> AllowOverride None Options None Order allow,deny Allow from all </Directory> # # DefaultType: the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain <IfModule mime_module> # # TypesConfig points to the file containing the list of mappings from # filename extension to MIME-type. # TypesConfig conf/mime.types # # AddType allows you to add to or override the MIME configuration # file specified in TypesConfig for specific file types. # #AddType application/x-gzip .tgz # # AddEncoding allows you to have certain browsers uncompress # information on the fly. Note: Not all browsers support this. # #AddEncoding x-compress .Z #AddEncoding x-gzip .gz .tgz # # If the AddEncoding directives above are commented-out, then you # probably should define those extensions to indicate media types: # AddType application/x-compress .Z AddType application/x-gzip .gz .tgz # # AddHandler allows you to map certain file extensions to "handlers": # actions unrelated to filetype. These can be either built into the server # or added with the Action directive (see below) # # To use CGI scripts outside of ScriptAliased directories: # (You will also need to add "ExecCGI" to the "Options" directive.) # #AddHandler cgi-script .cgi # For type maps (negotiated resources): #AddHandler type-map var # # Filters allow you to process content before it is sent to the client. # # To parse .shtml files for server-side includes (SSI): # (You will also need to add "Includes" to the "Options" directive.) # #AddType text/html .shtml #AddOutputFilter INCLUDES .shtml </IfModule> # # The mod_mime_magic module allows the server to use various hints from the # contents of the file itself to determine its type. The MIMEMagicFile # directive tells the module where the hint definitions are located. # #MIMEMagicFile conf/magic # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://localhost/subscription_info.html # # # EnableMMAP and EnableSendfile: On systems that support it, # memory-mapping or the sendfile syscall is used to deliver # files. This usually improves server performance, but must # be turned off when serving from networked-mounted # filesystems or if support for these functions is otherwise # broken on your system. # #EnableMMAP off #EnableSendfile off # Supplemental configuration # # The configuration files in the conf/extra/ directory can be # included to add extra features or to modify the default configuration of # the server, or you may simply copy their contents here and change as # necessary. # Server-pool management (MPM specific) #Include conf/extra/httpd-mpm.conf # Multi-language error messages #Include conf/extra/httpd-multilang-errordoc.conf # Fancy directory listings #Include conf/extra/httpd-autoindex.conf # Language settings #Include conf/extra/httpd-languages.conf # User home directories #Include conf/extra/httpd-userdir.conf # Real-time info on requests and configuration #Include conf/extra/httpd-info.conf # Virtual hosts #Include conf/extra/httpd-vhosts.conf # Local access to the Apache HTTP Server Manual #Include conf/extra/httpd-manual.conf # Distributed authoring and versioning (WebDAV) #Include conf/extra/httpd-dav.conf # Various default settings #Include conf/extra/httpd-default.conf # Secure (SSL/TLS) connections #Include conf/extra/httpd-ssl.conf # # Note: The following must must be present to support # starting without SSL on platforms with no /dev/random equivalent # but a statically compiled-in mod_ssl. # <IfModule ssl_module> SSLRandomSeed startup builtin SSLRandomSeed connect builtin </IfModule> #!! <IfModule mod_php5.c> AddType application/x-httpd-php .php AddType application/x-httpd-php .php5 AddType application/x-httpd-php-source .phps </IfModule>

  Read the article

• Java in Flux: Utopia or Deuteranopia?

  - by Tori Wieldt

  What a difference a year makes, indeed. Steve Harris, Senior VP, App Server Dev, Oracle and Adam Messinger, VP, Fusion Middleware Group, Oracle presented an informative keynote at the TheServerSide Java Symposium today. With a title "Java in Flux: Utopia or Deuteranopia?" you know things are going to be interesting (see Aeon Flux if you don't get the title reference).What a YearThey started with a little background, explaining that the reactions to Oracle's acquisition of Sun (and therefore Java) one year ago varied greatly, from "Freak Out!" to "Don't Panic." From the Oracle perspective, being the steward of and key contributor to Java requires a lot of sausage making.  They admitted to Oracle's fair share of Homer Simpson-esque "D'oh" moments in the past year, which was complicated by Oracle's communication style.   "Oracle has a tradition has a saying a few things and sticking by then, in contrast to Sun who was much more open," Adam explained. "We laid out the Java roadmap and are executing on it, and we hope that speaks to our commitment."Java SEAdam talked about having a long term perspective on the Java language (20+ years), letting ideas mature in more experimental languages, then bringing them into Java. Current priorities include: JVM convergence (getting the best features of JRockit into Hotspot); support of parallel/multi-core programming, and of course, all the improvements in JDK7. The JDK7 Developer Preview is underway (please download now and report bugs!). The Oracle development team is also working on Lambda and modularity (Jigsaw) for SE 8. Less certain, but also under discussion are improvements for Java SE 9. Adam is thinking of it as a "back to basics" release. He mentioned reworking JNI, improving data integration and improved device support.Java EE To provide context about Java EE, Steve said Java EE was great at getting businesses on the internet. The success of Java EE resulted in an incredible expansion of the middleware marketplace for developers and vendors.  But with success, came more. Java EE kept piling on capabilities, but that created excess baggage.  Doing simple things was no longer so simple. That's where Java community is so valuable: "When Java EE was too complex and heavyweight, many people were happy to tell us what we were doing wrong and popularize solutions," Steve explained. Because of that feedback, the Java EE teams focused on making things simple again: POJOs and annotations, and leveraging changes in Java SE.  Steve said that "innovation doesn't happen in expert groups, it happens on the ground where developers are solving problems," and platform stewards need to pay attention and take advantage of changes that are taking place.Enter the Cloud "Developers are restless, they want cloud functionality from their own IT dept" Steve explained. With the cloud, the scope of problem has expanded to include the data center itself, with multiple tenants. To move forward, existing APIs in Java EE need to be updated to be tenant-aware, service-enabled, and EE needs to support various styles of deployment. The goal is to get all that done in Java EE 8.Adam questioned Steve about timing and schedule. "Yes, the schedule is aggressive, but it'll work" Steve said. Then Adam asked about modularization. If Java SE 8 comes out at the end of 2012, when can Java EE deliver modularization? Steve suggested that key stakeholders can come with up some pre-SE 8 agreement on how to expose the metadata about modules. He then alluded to Mark Reinhold and John Duimovich's keynote at EclipseCON next week. Stay tuned.Evil Master PlanIn conclusion, Adam finally admitted to Oracle's Evil Master Plan: 1) Invest in and improve Java SE and EE 2) Collaborate with the community 3) Broaden the marketplace for Java development. Bwaaaaaaaaahahaha! <rubs hands together>Key LinksJDK7 Developer Preview  http://jdk7.java.net/preview/Oracle Technology Network http://www.oracle.com/technetwork/java/index.htmlTheServerSide Java Symposium  http://javasymposium.techtarget.com/"Utopia or Deuteranopia?" http://en.wikipedia.org/wiki/Aeon_Flux

  Read the article

• C# 4 Named Parameters for Overload Resolution

  - by Steve Michelotti

  C# 4 is getting a new feature called named parameters. Although this is a stand-alone feature, it is often used in conjunction with optional parameters. Last week when I was giving a presentation on C# 4, I got a question on a scenario regarding overload resolution that I had not considered before which yielded interesting results. Before I describe the scenario, a little background first. Named parameters is a well documented feature that works like this: suppose you have a method defined like this: 1: void DoWork(int num, string message = "Hello") 2: { 3: Console.WriteLine("Inside DoWork() - num: {0}, message: {1}", num, message); 4: } This enables you to call the method with any of these: 1: DoWork(21); 2: DoWork(num: 21); 3: DoWork(21, "abc"); 4: DoWork(num: 21, message: "abc"); and the corresponding results will be: Inside DoWork() - num: 21, message: Hello Inside DoWork() - num: 21, message: Hello Inside DoWork() - num: 21, message: abc Inside DoWork() - num: 21, message: abc This is all pretty straight forward and well-documented. What is slightly more interesting is how resolution is handled with method overloads. Suppose we had a second overload for DoWork() that looked like this: 1: void DoWork(object num) 2: { 3: Console.WriteLine("Inside second overload: " + num); 4: } The first rule applied for method overload resolution in this case is that it looks for the most strongly-type match first.  Hence, since the second overload has System.Object as the parameter rather than Int32, this second overload will never be called for any of the 4 method calls above.  But suppose the method overload looked like this: 1: void DoWork(int num) 2: { 3: Console.WriteLine("Inside second overload: " + num); 4: } In this case, both overloads have the first parameter as Int32 so they both fulfill the first rule equally.  In this case the overload with the optional parameters will be ignored if the parameters are not specified. Therefore, the same 4 method calls from above would result in: Inside second overload: 21 Inside second overload: 21 Inside DoWork() - num: 21, message: abc Inside DoWork() - num: 21, message: abc Even all this is pretty well documented. However, we can now consider the very interesting scenario I was presented with. The question was what happens if you change the parameter name in one of the overloads.  For example, what happens if you change the parameter *name* for the second overload like this: 1: void DoWork(int num2) 2: { 3: Console.WriteLine("Inside second overload: " + num2); 4: } In this case, the first 2 method calls will yield *different* results: 1: DoWork(21); 2: DoWork(num: 21); results in: Inside second overload: 21 Inside DoWork() - num: 21, message: Hello We know the first method call will go to the second overload because of normal method overload resolution rules which ignore the optional parameters.  But for the second call, even though all the same rules apply, the compiler will allow you to specify a named parameter which, in effect, overrides the typical rules and directs the call to the first overload. Keep in mind this would only work if the method overloads had different parameter names for the same types (which in itself is weird). But it is a situation I had not considered before and it is one in which you should be aware of the rules that the C# 4 compiler applies.

  Read the article

• News you can use, PeopleTools gems at OpenWorld 2012

  - by PeopleTools Strategy

  Here are some of the sessions which may not have caught your eyes during your scheduling of events you would like to attend at this year's Open World! CON9183 PeopleSoft Technology Roadmap Jeff Robbins Mon, Oct 1 4:45 PM Moscone West, Room 3002/4 Jeff's session is always very well attended. Come to hear, and see, what's going to be delivered in the new release and get some thoughts on where PeopleTools and the industry is heading. CON9186 Delivering a Ground-Breaking User Interface with PeopleTools Matt Haavisto Steve Elcock Wed, Oct 3 3:30 PM Moscone West, Room 3009 This session will be wonderfully engaging for participants.  As part of our demonstration, audience members will be able to interact live and real-time with our demo using their smart phones and tablets as if you are users of the system. CON9188 A Great User Experience via PeopleSoft Applications Portal Matt Haavisto Jim Marion Pramod Agrawal Mon, Oct 1 12:15 PM Moscone West, Room 3009 This session covers not only the PeopleSoft Portal, but new features like Workcenters and Dashboards, and how they all work together to form the PeopleSoft ecosystem. CON9192 Implementing a PeopleSoft Maintenance Strategy with My Update Manager Mike Thompson Mike Krajicek Tue, Oct 2 1:15 PM Moscone West, Room 3009 The LCM development team will show Oracle's My Update Manager for PeopleSoft and how it drastically simplifies deciding what updates are required for your specific environment. CON9193 Understanding PeopleSoft Maintenance Tools & How They Fit Together Mike Krajicek Wed, Oct 3 10:15 AM Moscone West, Room 3002/4 Learn about the portfolio of maintenance tools including some of the latest enhancements such as Oracle's My Update Manager for PeopleSoft, Application Data Sets, and the PeopleSoft Test Framework, and see what they can do for you. CON9200 PeopleTools Product Team Panel Discussion Jeff Robbins Willie Suh Virad Gupta Ravi Shankar Mike Krajicek Wed, Oct 3 5:00 PM Moscone West, Room 3009 Attend this session to engage in an open discussion with key members of Oracle's PeopleTools senior management team. You will be able to ask questions, hear their thoughts, and gain their insight into the PeopleTools product direction. CON9205 Securing Your PeopleSoft Integration Infrastructure Greg Kelly Keith Collins Tue, Oct 2 10:15 AM Moscone West, Room 3011 This session, with the senior integration developer, will outline Oracle's best practices for securing your integration infrastructure so that you know your web services and REST services are as secure as the rest of your PeopleSoft environment. CON9210 Performance Tuning for the PeopleSoft Administrator Tim Bower David Kurtz Mon, Oct 1 10:45 AM Moscone West, Room 3009 Meet long time technical consultants with deep knowledge of system tuning, Tim Bower of the Center of Excellence and David Kurtz, author of "PeopleSoft for the Oracle DBA". System administrators new to tuning a PeopleSoft environment as well as seasoned experts will come away with new techniques that will help them improve the performance of their PeopleSoft system. CON9055 Advanced Management of Oracle PeopleSoft with Oracle Enterprise Manager Greg Kelly Milten Garia Greg Bouras Thurs Oct 4 12:45 PM Moscone West, Room 3009 This promises to be a really interesting session as Milten Garia from CSU discusses lessons learned during the implementation of Oracle's Enterprise Manager with the PeopleSoft plug-in across a multi campus environment. There are some surprising things about Solaris 10 and the Bourne shell. Some creative work by the Unix administrators so the well tried scripts and system replication processes were largely unaffected. CON8932 New Functional PeopleTools Capabilities for the Line of Business User Jeff Robbins Tues, Oct 2 5:00 PM Moscone West, Room 3007 Using PeopleTools 8.5x capabilities like: related content, embedded help, pivot grids, hover-over, and more, Jeff will discuss how these can deliver business value and innovation which will positively impact your business without the high costs associated with upgrading your PeopleSoft applications. Check out a more detailed list here. We look forward to meeting you all there!

  Read the article

• Knowledge Management Feedback

  - by Robert Schweighardt

  Did you know that you can provide feedback on Knowledge Management (KM) articles? It's nice to read a technical article that is well-written, the grammar and spelling are correct, the information is up to date, concise, to the point, easy to understand and it flows from one paragraph to another.  And though we always strive for a well-written article, it doesn't always come out that way. Knowledge Management articles are written by Oracle Support Engineers and we welcome your feedback.  Providing feedback helps to improve Oracle's Knowledge Base.  If you're reading a KM article and you have a comment, please let us know about it.  Maybe it's just to fix a spelling or grammatical error.  Maybe there's a broken link that needs to be fixed.  Maybe it's a suggestion to provide additional information.  Maybe the article contains incorrect information.  Maybe some information in the article is outdated.  Maybe something is not clear in the article.  Whatever it is, we want to hear about it.  We value your input! When you provide feedback it goes directly to the owner of the article.  The owner carefully reviews the comment and decides whether or not to implement it.  Most comments are implemented and we strive to implement them within a week!  For those comments that are not implemented, there is normally a good reason.  It may not be feasible to implement the suggestion or the suggestion may not be correct.  We don't take the decision lightly! So how do you provide feedback? Providing feedback on a KM article depends on whether you're a customer or an Oracle Employee. Customer 1. In the upper right hand corner of the article, click on the little +/- Rate this document icon: Note: The grayed out Comments (0) link will only show a number when there are open comments that are still being evaluated. 2. In the Article Rating window, complete as many of the following optional fields as you like and then click the Send Rating button: Rate the article as Excellent, Good or Poor Specify whether the article helped you or not Specify the ease of finding the article Provide whatever comments you have Employee The interface for Oracle Employees is a little bit different, there are more options. 1. The +/- Rate this document icon is also available to employees and is identical to what the customers have.  Please see Customer section above. 2. The Show document comments link shows all comments that have ever been submitted for the article 3. Employees have an additional way to submit a comment.  Click on the little + Add Comment icon: 4. Fill out the Add Comment fields and click the Add Comment button: We look forward to your feedback!

  Read the article

• Linux router: ping doesn't route back

  - by El Barto

  I have a Debian box which I'm trying to set up as a router and an Ubuntu box which I'm using as a client. My problem is that when the Ubuntu client tries to ping a server on the Internet, all the packets are lost (though, as you can see below, they seem to go to the server and back without problem). I'm doing this in the Ubuntu Box: # ping -I eth1 my.remote-server.com PING my.remote-server.com (X.X.X.X) from 10.1.1.12 eth1: 56(84) bytes of data. ^C --- my.remote-server.com ping statistics --- 13 packets transmitted, 0 received, 100% packet loss, time 12094ms (I changed the name and IP of the remote server for privacy). From the Debian Router I see this: # tcpdump -i eth1 -qtln icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth1, link-type EN10MB (Ethernet), capture size 65535 bytes IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 305, seq 7, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 305, seq 8, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 305, seq 8, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 305, seq 9, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 305, seq 9, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 305, seq 10, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 305, seq 10, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 305, seq 11, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 305, seq 11, length 64 ^C 9 packets captured 9 packets received by filter 0 packets dropped by kernel # tcpdump -i eth2 -qtln icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth2, link-type EN10MB (Ethernet), capture size 65535 bytes IP 192.168.1.10 > X.X.X.X: ICMP echo request, id 360, seq 213, length 64 IP X.X.X.X > 192.168.1.10: ICMP echo reply, id 360, seq 213, length 64 IP 192.168.1.10 > X.X.X.X: ICMP echo request, id 360, seq 214, length 64 IP X.X.X.X > 192.168.1.10: ICMP echo reply, id 360, seq 214, length 64 IP 192.168.1.10 > X.X.X.X: ICMP echo request, id 360, seq 215, length 64 IP X.X.X.X > 192.168.1.10: ICMP echo reply, id 360, seq 215, length 64 IP 192.168.1.10 > X.X.X.X: ICMP echo request, id 360, seq 216, length 64 IP X.X.X.X > 192.168.1.10: ICMP echo reply, id 360, seq 216, length 64 IP 192.168.1.10 > X.X.X.X: ICMP echo request, id 360, seq 217, length 64 IP X.X.X.X > 192.168.1.10: ICMP echo reply, id 360, seq 217, length 64 ^C 10 packets captured 10 packets received by filter 0 packets dropped by kernel And at the remote server I see this: # tcpdump -i eth0 -qtln icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 1, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 1, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 2, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 2, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 3, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 3, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 4, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 4, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 5, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 5, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 6, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 6, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 7, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 7, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 8, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 8, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 9, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 9, length 64 18 packets captured 228 packets received by filter 92 packets dropped by kernel Here "X.X.X.X" is my remote server's IP and "Y.Y.Y.Y" is my local network's public IP. So, what I understand is that the ping packets are coming out of the Ubuntu box (10.1.1.12), to the router (10.1.1.1), from there to the next router (192.168.1.1) and reaching the remote server (X.X.X.X). Then they come back all the way to the Debian router, but they never reach the Ubuntu box back. What am I missing? Here's the Debian router setup: # ifconfig eth1 Link encap:Ethernet HWaddr 94:0c:6d:82:0d:98 inet addr:10.1.1.1 Bcast:10.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::960c:6dff:fe82:d98/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:105761 errors:0 dropped:0 overruns:0 frame:0 TX packets:48944 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:40298768 (38.4 MiB) TX bytes:44831595 (42.7 MiB) Interrupt:19 Base address:0x6000 eth2 Link encap:Ethernet HWaddr 6c:f0:49:a4:47:38 inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::6ef0:49ff:fea4:4738/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:38335992 errors:0 dropped:0 overruns:0 frame:0 TX packets:37097705 errors:0 dropped:0 overruns:0 carrier:1 collisions:0 txqueuelen:1000 RX bytes:4260680226 (3.9 GiB) TX bytes:3759806551 (3.5 GiB) Interrupt:27 eth3 Link encap:Ethernet HWaddr 94:0c:6d:82:c8:72 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:20 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:3408 errors:0 dropped:0 overruns:0 frame:0 TX packets:3408 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:358445 (350.0 KiB) TX bytes:358445 (350.0 KiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:2767779 errors:0 dropped:0 overruns:0 frame:0 TX packets:1569477 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:3609469393 (3.3 GiB) TX bytes:96113978 (91.6 MiB) # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.8.0.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 127.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 lo 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 192.168.1.0 0.0.0.0 255.255.255.0 U 1 0 0 eth2 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth2 # arp -n # Note: Here I have changed all the different MACs except the ones corresponding to the Ubuntu box (on 10.1.1.12 and 192.168.1.12) Address HWtype HWaddress Flags Mask Iface 192.168.1.118 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.72 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.94 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.102 ether NN:NN:NN:NN:NN:NN C eth2 10.1.1.12 ether 00:1e:67:15:2b:f0 C eth1 192.168.1.86 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.2 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.61 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.64 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.116 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.91 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.52 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.93 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.87 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.92 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.100 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.40 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.53 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.1 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.83 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.89 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.12 ether 00:1e:67:15:2b:f1 C eth2 192.168.1.77 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.66 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.90 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.65 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.41 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.78 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.123 ether NN:NN:NN:NN:NN:NN C eth2 # iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination # iptables -L -n -t nat Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- 10.1.1.0/24 !10.1.1.0/24 MASQUERADE all -- !10.1.1.0/24 10.1.1.0/24 Chain OUTPUT (policy ACCEPT) target prot opt source destination And here's the Ubuntu box: # ifconfig eth0 Link encap:Ethernet HWaddr 00:1e:67:15:2b:f1 inet addr:192.168.1.12 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:67ff:fe15:2bf1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:28785139 errors:0 dropped:0 overruns:0 frame:0 TX packets:19050735 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:32068182803 (32.0 GB) TX bytes:6061333280 (6.0 GB) Interrupt:16 Memory:b1a00000-b1a20000 eth1 Link encap:Ethernet HWaddr 00:1e:67:15:2b:f0 inet addr:10.1.1.12 Bcast:10.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:67ff:fe15:2bf0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:285086 errors:0 dropped:0 overruns:0 frame:0 TX packets:12719 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:30817249 (30.8 MB) TX bytes:2153228 (2.1 MB) Interrupt:16 Memory:b1900000-b1920000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:86048 errors:0 dropped:0 overruns:0 frame:0 TX packets:86048 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:11426538 (11.4 MB) TX bytes:11426538 (11.4 MB) # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 0.0.0.0 10.1.1.1 0.0.0.0 UG 100 0 0 eth1 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 10.8.0.0 192.168.1.10 255.255.255.0 UG 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 192.168.1.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 # arp -n # Note: Here I have changed all the different MACs except the ones corresponding to the Debian box (on 10.1.1.1 and 192.168.1.10) Address HWtype HWaddress Flags Mask Iface 192.168.1.70 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.90 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.97 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.103 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.13 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.120 (incomplete) eth0 192.168.1.111 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.118 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.51 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.102 (incomplete) eth0 192.168.1.64 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.52 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.74 (incomplete) eth0 192.168.1.94 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.121 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.72 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.87 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.91 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.71 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.78 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.83 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.88 (incomplete) eth0 192.168.1.82 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.98 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.100 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.93 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.73 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.11 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.85 (incomplete) eth0 192.168.1.112 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.89 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.65 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.81 ether NN:NN:NN:NN:NN:NN C eth0 10.1.1.1 ether 94:0c:6d:82:0d:98 C eth1 192.168.1.53 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.116 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.61 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.10 ether 6c:f0:49:a4:47:38 C eth0 192.168.1.86 (incomplete) eth0 192.168.1.119 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.66 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.1 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.1 ether NN:NN:NN:NN:NN:NN C eth1 192.168.1.92 ether NN:NN:NN:NN:NN:NN C eth0 # iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination # iptables -L -n -t nat Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain INPUT (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination Edit: Following Patrick's suggestion, I did a tcpdump con the Ubuntu box and I see this: # tcpdump -i eth1 -qtln icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth1, link-type EN10MB (Ethernet), capture size 65535 bytes IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 1, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 1, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 2, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 2, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 3, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 3, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 4, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 4, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 5, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 5, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 6, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 6, length 64 ^C 12 packets captured 12 packets received by filter 0 packets dropped by kernel So the question is: if all packets seem to be coming and going, why does ping report 100% packet loss?

  Read the article

• Organizational characteristics that impact the selection of Development Methodology concepts applied to a project

  Based on my experience, no one really follows a specific methodology exactly as it is formally designed. In fact, the key concepts of a few methodologies are usually combined to form a hybrid methodology for each project based on the current organizational makeup and the project need/requirements to be accomplished. Organizational characteristics that impact the selection of methodology concepts applied to a project. Prior subject knowledge pertaining to a project can be critical when deciding on what methodology or combination of methodologies to apply to a project. For example, if a project is very straight forward, and the development staff has experience in developing  that are similar, then the waterfall method could possibly be the best choice because little to no research is needed  in order to complete the project tasks and there is very little need for changes to occur.  On the other hand, if the development staff has limited subject knowledge or the requirements/specification of the project could possibly change as the project progresses then the use of spiral, iterative, incremental, agile, or any combination would be preferred. The previous methodologies used by an organization typically do not change much from project to project unless the needs of a project dictate differently. For example, if the waterfall method is the preferred development methodology then most projects will be developed by the waterfall method. Depending on the time allotted to a project each day can impact the selection of a development methodology. In one example, if the staff can only devote a few hours a day to a project then the incremental methodology might be ideal because modules can be added to the final project as they are developed. On the other hand, if daily time allocation is not an issue, then a multitude of methodologies could work well for a project. Project characteristics that impact the selection of methodology concepts applied to a project. The type of project being developed can often dictate the type of methodology used for the project. Based on my experience, projects that tend to have a lot of user interaction, follow a more iterative, incremental, or agile approach typically using a prototype that develops into a final project. These methodologies desire back and forth communication between users, clients, and developers to allow for requirements to change and functionality to be enhanced. Conversely, limited interaction applications or automated services can still sometimes get away with using the waterfall or transactional approach. The timeline of a project can also force an organization to prefer a particular methodology over the rest. For instance, if the project must be completed within 24 hours, then there is very little time for discussions back and forth between clients, users and the development team. In this scenario, the waterfall method would be perfect because the only interaction with the client occurs prior to a development project to outline the system requirements, and the development team can quickly move through the software development stages in order to complete the project within the deadline. If the team had more time, then the other methodologies could also be considered because there is more time for client and users to review the project and make changes as they see fit, and/or allow for more time to review the project in order to enhance the business performance and functionality. Sometimes the client and or user involvement can dictate the selection of methodologies applied to a project. One example of this is if a client is highly motivated to get a project completed and desires to play an active part in the development process then the agile development approach would work perfectly with this client because it allows for frequent interaction between clients, users and the development team. The inverse of this situation is a client that just wants to provide the project requirements and only wants to get involved when the project is to be delivered. In this case the waterfall method would work well because there is no room for changes and no back and forth between the users, clients or the development team.

  Read the article

• SQL – Step by Step Guide to Download and Install NuoDB – Getting Started with NuoDB

  - by Pinal Dave

  Let us take a look at the application you own at your business. If you pay attention to the underlying database for that application you will be amazed. Every successful business these days processes way more data than they used to process before. The number of transactions and the amount of data is growing at an exponential rate. Every single day there is way more data to process than before. Big data is no longer a concept; it is now turning into reality. If you look around there are so many different big data solutions and it can be a quite difficult task to figure out where to begin. Personally, I have been experimenting with a lot of different solutions which allow my database to scale immediately without much hassle while maintaining optimal database performance.  There are for sure some solutions out there, but for many I even have to learn their specific language and there is a lot of new exploration to do. Honestly, what I prefer is a product, which works with the language I know (SQL) and follows all the RDBMS concepts which I am familiar with (ACID etc.). NuoDB is one such solution.  It is an operational NewSQL database built on a patented emergent architecture with full support for SQL and ACID guarantees. In this blog post, I will explore how one can download and install NuoDB database. Step 1: Follow me and go to the NuoDB download page. Simply fill out the form, accept the online license agreement, and you will be taken directly to a page where you can select any platform you prefer to install NuoDB. In my example below, I select the Windows 64-bit platform as it is one of the most popular NuoDB platforms. (You can also run NuoDB on Amazon Web Services but I prefer to install it on my local machine for the purposes of this blog). Step 2: Once you have downloaded the NuoDB installer, double click on it to install it on the Windows platform. Here is the enlarged the icon of the installer. Step 3: Follow the wizard installation, as it is pretty straight forward and easy to do so. I have selected all the options to install as the overall installation is very simple and it does not take up much space. I have installed it on my C drive but you can select your preferred drive. It is quite possible that if you do not have 64 bit Java, it will throw following error. If you face following error, I suggest you to download 64-bit Java from here. Make sure that you download 64-bit Java from following link: http://java.com/en/download/manual.jsp If already have Java 64-bit installed, you can continue with the installation as described in following image. Otherwise, install Java and start from with Step 1. As in my case, I already have 64-bit Java installed – and you won’t believe me when I say that the entire installation of NuoDB only took me around 90 seconds. Click on Finish to end to exit the installation. Step 4: Once the installation is successful, NuoDB will automatically open the following two tabs – Console and DevCenter — in your preferred browser. On the Console tab you can explore various components of the NuoDB solution, e.g. QuickStart, Admin, Explorer, Storefront and Samples. We will see various components and their usage in future blog posts. If you follow these steps in this post, which I have followed to install NuoDB, you will agree that the installation of NuoDB is extremely smooth and it was indeed a pleasure to install a database product with such ease. If you have installed other database products in the past, you will absolutely agree with me. So download NuoDB and install it today, and in tomorrow’s blog post I will take the installation to the next level. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: NuoDB

  Read the article

• Smooth Sailing or Rough Waters: Navigating Policy Administration Modernization

  - by helen.pitts(at)oracle.com

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Life insurance and annuity carriers continue to recognize the need to modernize their aging policy administration systems, but may be hesitant to move forward because of the inherent risk involved. To help carriers better prepare for what lies ahead LOMA's Resource Magazine asked Karen Furtado, partner of Strategy Meets Action, to help them chart a course in Navigating Policy Administration Selection, the cover story of this month’s issue. The industry analyst and research firm recently asked insurance carriers to name the business drivers for replacing legacy policy administration systems. The top five cited, according to Furtado, centered on: Supporting growth in current lines Improving competitive position Containing and reducing costs Supporting growth in new lines Supporting agent demands and interaction It’s no surprise that fueling growth, both now and in the future, continues to be a key driver for modernization. Why? Inflexible, hard-coded, legacy systems require customization by IT every time a change is required. This in turn impedes a carrier’s ability to be agile, constraining their ability to quickly adapt to changing regulatory requirements and evolving market demands. It also stymies their ability to quickly bring to market new products or rapidly configure changes to existing ones, and also can inhibit how carriers service customers and distribution channels. In the article, Furtado advised carriers to ensure that the policy administration system they are considering is current and modern, with an adaptable user interface and flexible service-oriented architecture. She said carriers to should ask themselves, “How much do you need flexibility and agility now and in the future? Does it support the business processes and rules that are needed for you to be able to create that adaptable environment?” Furtado went on to advise that carriers “Connect your strategy to your business and technical capabilities before you make investment choices…You want to enable your organization to transform for the future, not just automate the past.” Unlocking High Performance with Policy Administration Transformation also was the topic of a recent LOMA webcast moderated by Ron Clark, editor of LOMA's Resource Magazine. The web cast, which featured speakers from Oracle Insurance and Capgemini, focused on how insurers can competitively drive high performance by: Replacing a legacy policy administration system with a modern, flexible platform Optimizing IT and operations costs, creating consistent processes and eliminating resource redundancies Selecting the right partner with the best blend of technology, operational, and consulting capabilities to achieve market leadership Understanding the value of outsourcing closed block operations Learn more by clicking here to access this free, one-hour recorded webcast. Helen Pitts, is senior product marketing manager for Oracle Insurance's life and annuities solutions.

  Read the article

• Java EE 6 Pocket Guide from O'Reilly - Now Available in Paperback and Kindle Edition

  - by arungupta

  Hot off the press ... Java EE 6 Pocket Guide from 'OReilly Media is now available in Paperback and Kindle Edition. Here are the book details: Release Date: Sep 21, 2012 Language: English Pages: 208 Print ISBN: 978-1-4493-3668-4 | ISBN 10:1-4493-3668-X Ebook ISBN:978-1-4493-3667-7 | ISBN 10:1-4493-3667-1 The book provides a comprehensive summary of the Java EE 6 platform. Main features of different technologies from the platform are explained and accompanied by tons of samples. A chapter is dedicated to Managed Beans, Servlets, Java Persistence API, Enterprise JavaBeans, Contexts and Dependency Injection, JavaServer Faces, SOAP-Based Web Services, RESTful Web Services, Java Message Service, and Bean Validation in that format. Many thanks to Markus Eisele, John Yeary, and Bert Ertman for reviewing and providing valuable comments. This book was not possible without their extensive feedback! This book was mostly written by compiling my blogs, material from 2-day workshops, and several hands-on workshops around the world. The interactions with users of different technologies and whiteboard discussions with different specification leads helped me understand the technology better. Many thanks to them for helping me be a better user! The long international flights during my travel around the world proved extremely useful for authoring the content. No phone, no email, no IM, food served on the table, power outlet = a perfect recipe for authoring ;-) Markus wrote a detailed review of the book. He was one of the manuscript reviewers of the book as well and provided valuable guidance. Some excerpts from his blog: It covers the basics you need to know of Java EE 6 and gives good examples of all relevant parts. ... This is a pocket guide which is comprehensively written. I could follow all examples and it was a good read overall. No complicated constructs and clear writing. ... GO GET IT! It is the only book you probably will need about Java EE 6! It is comprehensive, wonderfully written and covers everything you need in your daily work. It is not a complete reference but provides a great shortcut to the things you need to know. To me it is a good beginners guide and also works as a companion for advanced users. Here is the first tweet feedback ... Jeff West was super prompt to place the first pre-order of my book, pretty much the hour it was announced. Thank you Jeff! @mike_neck posted the very first tweet about the book, thanks for that! The book is now available in Paperback and Kindle Edition from the following websites: O'Reilly Media (Ebook, Print & Ebook, Print) Amazon.com (Kindle Edition and Paperback) Barnes and Noble Overstock (1% off Amazon) Buy.com Booktopia.com Tower Books Angus & Robertson Shopping.com Here is how I can use your help: Help spread the word about the book If you bought a Paperback or downloaded Kindle Edition, then post your review here. If you have not bought, then you can buy it at amazon.com and multiple other websites mentioned above. If you are coming to JavaOne, you'll have an opportunity to get a free copy at O'Reilly's booth on Monday (October 1) from 2-3pm. And you can always buy it from the JavaOne Bookstore. I hope you enjoy reading it and learn something new from it or hone your existing skills. As always, looking forward to your feedback!

  Read the article

• The Value of SOA Specialization - Fujitsu

  - by Jürgen Kress

  Thanks for the nice ink The Value of Specialization In my last post  I talked about Fujitsu's achievement in obtaining SOA and other specializations, but I have heard murmurings from other partners about what just is the value? I think Oracle have to do more to advertise the benefits to customers, we need to see customers asking for specialization for it to really work, but Oracle have made great promises about only recommending those partners who are specialized. For us there was another benefit. Oracle was sponsoring the 3rd Annual SOA Symposium in Berlin and invited us as their first specialized partner to take part. There is a great blog about the symposium on the SOA community blog site. This is real commitment from Oracle and we have other marketing opportunities being worked on with Jürgen. This does generate leads so my message to other Oracle Partners is, you need to do this, it is worthwhile.   Fujitsu - First SOA Specialized Partner Globally Just before Oracle Open World I found out that Fujitsu had achieved the first SOA Specialization globally. I think most partners know what the requirements are for Specialization and that in itself is challenging but the bureaucracy around the actual submission is an exercise in tenacity. I won’t go into that now; I have had my dig at Oracle this month, but enough to say the process could be improved. As a platinum partner we needed 5 specializations and we decided to go for SOA first. The reasoning behind this is that our Oracle Practice is known for being applications centric. We have always had an excellent technical capability but no one ever talked about that, it was just part and parcel of an implementation. However today we have just as many bids that are technology lead as there is applications lead, so it seemed a good plan to work on the areas we were not known for. We appointed a capability lead to be responsible for putting the team through the training and testing and Rosemary (Kell) was excellent, she ensured that everyone was on track and that it wasn’t just getting put into the ‘to do list’. In Fujitsu everyone in the Oracle Practice has an objective to achieve the competency tests in their area, so achieving the 2 pre sales, 2 sales and 1 support was no problem at all. We actually had 22 with the support capability proficiency.  The implementation specialist exams are much harder, more like OCP in the database area. We had help from the Oracle SOA Community; Jürgen Kress who runs this in EMEA is really motivational. At the time we started SOA was a beta exam which means you do not get the results immediately but again we put forward more than we needed. Manjit Chopra, Sukhraj Sahota, Emely Patra, Ian Scorrer and Sunny Sidhu all took the exam and eventually got the results they wanted they had passed. Congratulations. Here is Jurgen expalining why specialization is important. After the tests came the submissions where you need to include deals and experience, this was my bit, and persuading Oracle we really deserved the specialization. Finally we got the news we had been awarded the specialization, and a few days later that we were first globally. I am very proud. However there is no rest for the wicked and we plodded on to make the 5 specializations needed for Platinum and now we are working on the new Diamond status and I think SOA will be one of our 5 ‘super specializations’. This is a global Fujitsu initiative and I work closely with my colleague in Germany Jessika Weiss. It was nice to be able to have a press release about this and a comment from Judson Althoff  head of Oracle Alliances. For more information on SOA Specialization and the SOA Partner Community please feel free to register at www.oracle.com/goto/emea/soa (OPN account required) Blog Twitter LinkedIn Mix Forum Wiki Website Technorati Tags: SOA,SOA Community,OPN,Oracle,Fujitsu,Debra Lilley,Jürgen Kress,Specialization,SOA Specialization

  Read the article

• Tap Into Tier 1 ERP

  - by Christine Randle

  By: Larry Simcox, Senior Director, Accelerate Corporate Programs     Your customers aren’t satisfied with so-so customer service. Your employees aren’t happy with below average salaries.   So why would you settle for second-rate or tier 2 ERP?   A recent report from Nucleus Research found that usability improvements and rapid implementation tools are simplifying deployments, putting tier 1 enterprise applications well within reach for midsize companies. So how can your business tap into the power of tier 1 ERP? And what are the best ways to manage a deployment?   The Reputation of ERP Implementations Overhauling internal operations and implementing ERP can be a challenging endeavor for organizations of all sizes. Midsize companies often shy away from enterprise-class ERP, fearing complexity, limited resources and perceived challenging deployments. Many forward thinking executives experienced ERP implementations in the late 90s and early 2000s and embrace a strategy to grow their business by investing in a foundation for innovation and growth via ERP modernization projects.   In recent years there has been a strong consumerization of IT with enterprise applications and their delivery methods evolving to become more user-friendly.  Today, usability improvements and modern implementation tools have made top-tier ERP solutions more accessible for growing companies. Nucleus found that because enterprise-class software can now be rapidly deployed, the payback is quicker, the risks are lower, the software is less disruptive and overall, companies can differentiate themselves from their competitors and achieve more success with the advantages these types of systems deliver.   Tapping into the power of tier 1 ERP can be made much easier with Oracle Accelerate solutions. Created by Oracle's expert partners and reviewed by Oracle, Oracle Accelerate solutions are simple to deploy, industry-specific, packaged solutions that provide a fast time to benefit, which means getting the right solution in place quickly, inexpensively with a controlled scope and predictable returns.   How are growing midsize companies successfully deploying tier 1 ERP? According to Nucleus Research, companies can increase success in their tier 1 ERP deployments by limiting customization, planning a rapid go-live, bettering communication across departments, and considering different delivery options. Oracle Accelerate solutions incorporate industry best practices and encourage rapid deployments. And even more, Nucleus found customers deploying tier 1 ERP with Oracle that had used Oracle Business Accelerators, Oracle’s rapid implementation tools, reduced the time to deploy Oracle E-Business Suite by at least 50 percent.   Industrial manufacturer L.H. Dottie is one company that needed ERP with enhanced capabilities to support its growth and streamline business processes. Using out-of-the-box configuration of Oracle E-Business Suite modules (provided by Oracle Business Accelerators and delivered by Oracle Partner C3 Business Solutions), L.H. Dottie was able to speed its implementation and went live in just six and a half months. With tier 1 ERP, the company was able to grow and do its business better, automating a variety of processes, accelerating product delivery and gaining powerful data analysis capabilities that helped drive its business into further regions. See more details about their ERP implementation here.   Tier 1 enterprise-class applications have proven to boost the success of Oracle’s midsize customers. As Nucleus Research iterates, companies poised for growth or seeking to compete against larger competitors absolutely can tap into the power of tier 1 ERP and position themselves as enterprise-class through leveraging Oracle Accelerate solutions.   You can learn more here about The Evolving Business Case for Tier - 1 ERP in Midsize Companies in our exclusive webcast with Nucleus.   ###  

  Read the article

• Partner outreach on the Oracle Fusion Applications user experience begins

  - by mvaughan

  by Misha Vaughan, Architect, Applications User Experience I have been asked the question repeatedly since about December of last year: “What is the Applications User Experience group doing about partner outreach?”  My answer, at the time, was: “We are thinking about it.”  My colleagues and I were really thinking about the content or tools that the Applications UX group should be developing. What would be valuable to our partners? What will actually help grow their applications business, and fits within the applications user experience charter?In the video above, you’ll hear Jeremy Ashley, vice president of the Applications User Experience team, talk about two fundamental initiatives that our group is working on now that speaks straight to partners.  Special thanks to Joel Borellis, Kelley Greenly, and Steve Hoodmaker for helping to make this video happen so flawlessly. Steve was responsible for pulling together a day of Oracle Fusion Applications-oriented content, including David Bowin, Director, Fusion Applications Strategy, on some of the basic benefits of Oracle Fusion Applications.  Joel Borellis, Group Vice President, Partner Enablement, and David Bowin in the Oracle Studios.Nigel King, Vice President Applications Functional Architecture, was also on the list, talking about co-existence opportunities with Oracle Fusion Applications.Me and Nigel King, just before his interview with Joel. Fusion Applications User Experience 101: Basic education  Oracle has invested an enormous amount of intellectual and developmental effort in the Oracle Fusion Applications user experience. Find out more about that at the Oracle Partner Network Fusion Learning Center (Oracle ID required). What you’ll learn will help you uncover how, exactly, Oracle made Fusion General Ledger “sexy,” and that’s a direct quote from Oracle Ace Director Debra Lilley, of Fujitsu. In addition, select Applications User Experience staff members, as well as our own Fusion User Experience Advocates,  can provide a briefing to our partners on Oracle’s investment in the Oracle Fusion Applications user experience. Looking forward: Taking the best of the Fusion Applications UX to your customersBeyond a basic orientation to one of the key differentiators for Oracle Fusion Applications, we are also working on partner-oriented training.A question we are often getting right now is: “How do I help customers build applications that look like Fusion?” We also hear: “How do I help customers build applications that take advantage of the next-generation design work done in Fusion?”Our answer to this is training and a tool – our user experience design patterns – these are a set of user experience best-practices. Design patterns are re-usable, usability-tested, user experience components that make creating Fusion Applications-like experiences straightforward.  It means partners can leverage Oracle’s investment, but also gain an advantage by not wasting time solving a problem we’ve already solved. Their developers can focus on helping customers tackle the harder development challenges. Ultan O’Broin, an Apps UX team member,  and I are working with Kevin Li and Chris Venezia of the Oracle Platform Technology Services team, as well as Grant Ronald in Oracle ADF, to bring you some of the best “how-to” UX training, customized for your local area. Our first workshop will be in EMEA. Stay tuned for an assessment and feedback from the event.

  Read the article

• maintaining a growing, diverse codebase with continuous integration

  - by Nate

  I am in need of some help with philosophy and design of a continuous integration setup. Our current CI setup uses buildbot. When I started out designing it, I inherited (well, not strictly, as I was involved in its design a year earlier) a bespoke CI builder that was tailored to run the entire build at once, overnight. After a while, we decided that this was insufficient, and started exploring different CI frameworks, eventually choosing buildbot. One of my goals in transitioning to buildbot (besides getting to enjoy all the whiz-bang extras) was to overcome some of the inadequacies of our bespoke nightly builder. Humor me for a moment, and let me explain what I have inherited. The codebase for my company is almost 150 unique c++ Windows applications, each of which has dependencies on one or more of a dozen internal libraries (and many on 3rd party libraries as well). Some of these libraries are interdependent, and have depending applications that (while they have nothing to do with each other) have to be built with the same build of that library. Half of these applications and libraries are considered "legacy" and unportable, and must be built with several distinct configurations of the IBM compiler (for which I have written unique subclasses of Compile), and the other half are built with visual studio. The code for each compiler is stored in two separate Visual SourceSafe repositories (which I am simply handling using a bunch of ShellCommands, as there is no support for VSS). Our original nightly builder simply took down the source for everything, and built stuff in a certain order. There was no way to build only a single application, or pick a revision, or to group things. It would launched virtual machines to build a number of the applications. It wasn't very robust, it wasn't distributable. It wasn't terribly extensible. I wanted to be able to overcame all of these limitations in buildbot. The way I did this originally was to create entries for each of the applications we wanted to build (all 150ish of them), then create triggered schedulers that could build various applications as groups, and then subsume those groups under an overall nightly build scheduler. These could run on dedicated slaves (no more virtual machine chicanery), and if I wanted I could simply add new slaves. Now, if we want to do a full build out of schedule, it's one click, but we can also build just one application should we so desire. There are four weaknesses of this approach, however. One is our source tree's complex web of dependencies. In order to simplify config maintenace, all builders are generated from a large dictionary. The dependencies are retrieved and built in a not-terribly robust fashion (namely, keying off of certain things in my build-target dictionary). The second is that each build has between 15 and 21 build steps, which is hard to browse and look at in the web interface, and since there are around 150 columns, takes forever to load (think from 30 seconds to multiple minutes). Thirdly, we no longer have autodiscovery of build targets (although, as much as one of my coworkers harps on me about this, I don't see what it got us in the first place). Finally, aformentioned coworker likes to constantly bring up the fact that we can no longer perform a full build on our local machine (though I never saw what that got us, either, considering that it took three times as long as the distributed build; I think he is just paranoically phobic of ever breaking the build). Now, moving to new development, we are starting to use g++ and subversion (not porting the old repository, mind you - just for the new stuff). Also, we are starting to do more unit testing ("more" might give the wrong picture... it's more like any), and integration testing (using python). I'm having a hard time figuring out how to fit these into my existing configuration. So, where have I gone wrong philosophically here? How can I best proceed forward (with buildbot - it's the only piece of the puzzle I have license to work on) so that my configuration is actually maintainable? How do I address some of my design's weaknesses? What really works in terms of CI strategies for large, (possibly over-)complex codebases?

  Read the article

• RC of Entity Framework 4.1 (which includes EF Code First)

  - by ScottGu

  Last week the data team shipped the Release Candidate of Entity Framework 4.1.  You can learn more about it and download it here. EF 4.1 includes the new “EF Code First” option that I’ve blogged about several times in the past.  EF Code First provides a really elegant and clean way to work with data, and enables you to do so without requiring a designer or XML mapping file.  Below are links to some tutorials I’ve written in the past about it: Code First Development with Entity Framework 4.x EF Code First: Custom Database Schema Mapping Using EF Code First with an Existing Database The above tutorials were written against the CTP4 release of EF Code First (and so some APIs might be a little different) – but the concepts and scenarios outlined in them are the same as with the RC. Go Live License Last week’s EF 4.1 RC ships with a “go live” license that enables you to use it in production environments.  The final release of EF 4.1 will ship within the next 4 weeks and will be 100% API compatible with the RC release. Improvements with the RC The RC includes several improvements and enhancements.  The EF team has a good blog post summarizing the RC changes.  Scott Hanselman also has a nice video interview with the data team that talks more about the release. One of my favorite improvements introduced with last week’s RC is its support for medium trust security.  This enables you to use EF 4.1 (and code-first) within low-cost ASP.NET shared hosting web environments – without requiring a hoster to install anything to use it. EF 4.1 also now supports validation with not only code-first scenarios, but also model-first and database-first workflows.  Upgrading from previous releases The RC does include a few API tweaks and changes from the prior CTP builds.  Read the release notes that come with the release to get a more detailed listing of the changes. John Papa also has an excellent Upgrading to EF 4.1 RC blog post that describes the steps he took when upgrading a large project he wrote with the previous CTP5 release.  The work to upgrade is pretty straight forward and easy – use his write-up as a guide on how to quickly update projects of your own. NuGet Package Rename One of the changes that the data team made between the CTP5 and RC releases was to rename the NuGet package name from “EFCodeFirst” to “EntityFramework”. They decided to make this change since the EF 4.1 release now includes several additions above and beyond just code first. If you already have installed the “EFCodeFirst” NuGet package, you’ll want to uninstall it and then install the new “EntityFramework” NuGet package.  John Papa’s blog post details the exact steps on how to do this (it only takes ~20 seconds to do this). More EF Tutorials Julie Lerman has created some nice whitepapers and tutorials for MSDN that show using the new EF4 and EF 4.1 feature set. Click here to find links to read and watch them. Summary I’m really excited about the EF 4.1 release that will be shipping next month.  It significantly improves the Entity Framework, and makes it even easier and cleaner to work with data inside of .NET.  You can take advantage of it within all ASP.NET projects (including both Web Forms and MVC), within client projects using Windows Forms and WPF, and within other project types like WCF, Console and Services.  You can use NuGet to easily install it within all of them. Hope this helps, Scott P.S. I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

  Read the article

• NetBeans PHP Community Council

  - by Tomas Mysik

  Hi all, today we would like to inform all of you that now you have a chance to improve NetBeans via NetBeans PHP Community Council. The author of this activity is Timur Poperecinii and he would like to tell you a few words about it. Hello passionate technical people, First of all let me introduce myself: my name is Timur, I’m a developer from Moldova (that little country between Romania and Ukraine), I develop mostly in .NET and JQuery, but I love to learn more, not being an expert I am familiar with Java (Struts2, Play), PHP (Symfony2), Ruby (Rails), Sencha Touch 2 and other technologies. I was “introduced” in PHP recently by a client of mine who requested to make the work specifically in PHP. Let me tell you a little story about my experience with open source and IDEs: when I was studying in university in 2007 I think, I did a simple little application in PHP and thought “Damn, if only there was a good IDE for PHP so I could relax and no having to remember all the function names”, then when I searched on internet pretty much everyone was using Vim or Emacs on Linux, but it had no autocomplete anyway, just syntax highlighting. I remember using some tool like Notepad++ I think. Nowadays everything changed, we have highlighting and autocomplete for about all standard things in PHP in many IDEs. I use NetBeans for PHP, and I really am happy with the experience I have there with standard PHP code, but for frameworks I still think there is lots of room for improvements. For example we have some Symfony 2 and Twig support. But I’d love to see more of that coming, for example I’m a big fan of file templates, where the main goal is to not waste time on writing over and over again something that can be generated, and it counts even more when you don’t have a lot of autocomplete. So what I thought, “Hey I know Java a little, and NetBeans has plugins, so may be it worth trying to do a file templates plugin”, and so I did, you can find details about my Unified Udevi Symfony2 Plugin for NetBeans 7.2 on my blog. It wasn’t hard, and it even was fun! Give back to open source Now think a little, NetBeans is an open source project and PHP support is just a part of it, so the resources are pretty limited in this area. But we as a community that uses this product, want to have the best possible experience with PHP and frameworks(!!!). So why don’t we GIVE BACK TO OPENSOURCE ? Imagine an IDE that can do all the things you wanted + it is free. Now how far is NetBeans from that point? I guess not so far – you might miss a little niche thing that you use on a daily basis, but then the question appears why don’t you make it happen on your own? NetBeans PHP Community Council What I proposed is to create a NetBeans PHP Community Council that will be formed of people willing to change something, willing to create plugins for their own needs and for the needs of the community, test the plugins created by them too, and basically evolve NetBeans in direction they want to reach. I already talked with the NetBeans PHP team. They are only happy to help this Council, with technical advises, opening some APIs we might need to have access to, and other things. One important thing to mention is that this Council is a Community project, so though we’ll have direct discussions with NetBeans PHP Dev team, NetBeans is not the leading force here, it is the community. You can see more details about the goals and structure I proposed at NetBeans PHP Community Council wiki page. We use this mail list: [email protected] for discussions and topics related to the Council. How can I join To join the NetBeans PHP Community Council please send an email to [email protected] with the subject of the mail starting with [Council New Member]. You can subscribe to this mail list here:http://netbeans.org/projects/php/lists. in your mail please indicate your location, age and experience both in Java and PHP. I need these data to assign you to a team. A response will be send to you with your next assignment and some people to contact. I really hope that you’ll make a step forward and try to make your everyday use of NetBeans even more fun.

  Read the article

• Pull Request Changes, Multi-Selection in Advanced View, and Advertisement Changes

  [Do you tweet? Follow us on Twitter @matthawley and @adacole_msft] We deployed a new version of the CodePlex website today. Pull Request Changes In this release, we have begun to re-focus on Pull Requests to ensure a productive experience between the project users and developers. We feel we made significant progress in this area for this release and look forward to using your feedback to drive future iterations. One of the biggest hurdles people have indicated is the inability to see what a pull request includes without pulling the source down from a Mercurial client. With today’s changes, any user has the ability to view a pull request, the changesets / changes included, and perform an inline diff of the file. When a pull request is made, the CodePlex website will query for all outgoing changes from the fork to the main repository for a point-in-time comparison. Because of this point-in-time comparison… All existing pull requests created prior to this release will not have changesets associated with them. If new commits are pushed to the fork while a pull request is active, they will not appear associated with the pull request. The pull request will need to be re-submitted for them to appear. Once a pull request is created, you can “View the Pull Request” which takes you to a page that looks like As you may notice, we now display a lot more detailed information regarding that pull request including who it was requested by and when, the associated changesets, the description, who it’s assigned to (we’ll come back to this) and the listing of summarized file changes. What you’ll also notice, is that each modified file has the ability to view a diff of all changes made. When you click “(view diff)” for a file, an inline diff experience appears. This new experience allows you to quickly navigate through all of the modified files as well as viewing the various change blocks for each file. You’ll also notice as you browse through each file’s changes, we update the URL to include the file path so you can quickly send a direct link to a pull request’s file. Clicking “(close diff)” will bring you back to the original pull request view. View this pull request live on WikiPlex. Pull Request Review Assignment Another new feature we added for pull requests is the ability for project members to assign pull requests for review. Any project member has the ability to assign (and re-assign if needed) a pull request to a project member. Once the assignment has been made, that project member will be notified via email of the assignment. Once they complete the review of the pull request, they can either accept or deny it similarly to the previous process. Multi-Selection in Advanced View Filters One of the more recent requests we have heard from users is the ability multi-select advanced view filters for work items. We are happy to announce this is now possible. Simply control-click the multiple options for each filter item and your work item query will be refined as such. Should you happen to unselect all options for a given filter, it will automatically reset to the default option for that filter. Furthermore, the “Direct Link” URL will be updated to include the multi-selected options for each filter. Note: The “Direct Link” feature was released in our previous deployment, just never written about. It allows you to capture the current state of your query and send it to other individuals. Advertisement Changes Very recently, the advertiser (The Lounge) we partnered to provide advertising revenue for projects, or donated to charity, was acquired by Lake Quincy Media. There has been no change in the advertising platform offering, and all projects have been converted over to using the new infrastructure. Project owners should note the new contact information for getting paid. The CodePlex team values your feedback, and is frequently monitoring Twitter, our Discussions and Issue Tracker for new features or problems. If you’ve not visited the Issue Tracker recently, please take a few moments to log an idea or vote for the features you would most like to see implemented on CodePlex.

  Read the article

• Use Case Actors - Primary versus Secondary

  - by Dave Burke

  The Unified Modeling Language (UML1) defines an Actor (from UseCases) as: An actor specifies a role played by a user or any other system that interacts with the subject. In Alistair Cockburn’s book “Writing Effective Use Cases” (2) Actors are further defined as follows: Primary Actor: The primary actor of a use case is the stakeholder that calls on the system to deliver one of its services. It has a goal with respect to the system – one that can be satisfied by its operation. The primary actor is often, but not always, the actor who triggers the use case. Supporting Actors: A supporting actor in a use case in an external actor that provides a service to the system under design. It might be a high-speed printer, a web service, or humans that have to do some research and get back to us. In a 2006 article (3) Cockburn refined the definitions slightly to read: Primary Actors: The Actor(s) using the system to achieve a goal. The Use Case documents the interactions between the system and the actors to achieve the goal of the primary actor. Secondary Actors: Actors that the system needs assistance from to achieve the primary actor’s goal. Finally, the Oracle Unified Method (OUM) concurs with the UML definition of Actors, along with Cockburn’s refinement, but OUM also includes the following: Secondary actors may or may not have goals that they expect to be satisfied by the use case, the primary actor always has a goal, and the use case exists to satisfy the primary actor. Now that we are on the same “page”, let’s consider two examples: A bank loan officer wants to review a loan application from a customer, and part of the process involves a real-time credit rating check. Use Case Name: Review Loan Application Primary Actor: Loan Officer Secondary Actors: Credit Rating System A Human Resources manager wants to change the job code of an employee, and as part of the process, automatically notify several other departments within the company of the change. Use Case Name: Maintain Job Code Primary Actor: Human Resources Manager Secondary Actors: None The first example is quite straight forward; we need to define the Secondary Actor because without the “Credit Rating System” we cannot successfully complete the Use Case. In other words, the goal of the Primary Actor is to successfully complete the Loan Application, but they need the explicit “help” of the Secondary Actor (Credit Rating System) to achieve this goal. The second example is where people sometimes get confused. Within OUM we would not include the “other departments” as Secondary Actors and therefore not include them on the Use Case diagram for the following reasons: The other departments are not required for the successful completion of the Use Case We are not expecting any response from the other departments (at least within the bounds of the Use Case under discussion) Having said that, within the detail of the Use Case Specification Main Success Scenario, we would include something like: “The system sends a notification to the related department heads (ref. Business Rule BR101)” Now let’s consider one final example. A Procurement Manager wants to place a “bid” for some goods using an On-Line Trading Community (B2B version of eBay) Use Case Name: Create Bid Primary Actor: Procurement Manager Secondary Actors: On-Line Trading Community You might wonder why the Trading Community is listed as a Secondary Actor, i.e. if all we are going to do is place a bid for a specific quantity of goods at a given price and send that off to the Trading Community, then why would the Trading Community need to “assist” in that Use Case? Well, once again, it comes back to the “User Experience” and how we want to optimize that when we think about our Use Case, and ultimately, when the developer comes to assembling some code. In this final example, the Procurement Manager cannot successfully complete the “Create Bid” Use Case until they receive an affirmative confirmation back from the Trading Community that the Bid has been accepted. Therefore, the Trading Community must become a Secondary Actor and be referenced both on the Use Case diagram and Use Case Specification. Any astute readers who are wondering about the “single sitting” rule will have to wait for a follow-up Blog entry to find out how that consideration can be factored in!!! Happy Use Case writing! (1) OMG Unified Modeling LanguageTM (OMG UML), Superstructure Version 2.4.1 (2) Cockburn, A, 2000, Writing Effective Use Case, Addison-Wesley Professional; Edition 1 (3) Cockburn, A, 2006 “Use Case fundamentals” viewed 20th March 2012, http://alistair.cockburn.us/Use+case+fundamentals

  Read the article

< Previous Page | 189 190 191 192 193 194 195 196 197 198 199 200  | Next Page >