Search Results

Search found 10878 results on 436 pages for 'changed'.

Page 196/436 | < Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >

• Why can't I mount this partition?

  - by Mahmoud20070

  I have two hard disks (80 Giga ide and 500 Giga sata) and i installed Ubuntu 11.10 in hard disk 80 giga and give for him 20 gigabyte after that he saw all partition in two hard drivers until one I see it's health in gparted magic and he can see it but can't check it and this photo the problem is on partition sdb5 and I use this command to mount it from terminal and took me this although that this partition working very well in windows and Ubuntu could mount it before please give me any solution unless format or anything well delete my data because it's very important Before when I checked /dev/sdb5, it had errors - now all program didn't appear any errors unless fdisk -l All of my hard disks can be mounted except Partition D or /dev/sdb5. What can I do? I have tried to mount the partition with many different programs like Gparted, KDE Partition Manager, ntfs-3g from the terminal, and the mount command. All of them said something to the effect of: fuse: mount failed: Device or resource busy ...or... one or more block devices are holding /dev/sdb5 I installed Ubuntu 11.10 again today to see if anything had changed. The partition works fine under Windows.

  Read the article

• A new mission statement for my school's algorithms class

  - by Eric Fode

  The teacher at Eastern Washington University that is now teaching the algorithms course is new to eastern and as a result the course has changed drastically mostly in the right direction. That being said I feel that the class could use a more specific, and industry oriented (since that is where most students will go, though suggestions for an academia oriented class are also welcome) direction, having only worked in industry for 2 years I would like the community's (a wider and much more collectively experienced and in the end plausibly more credible) opinion on the quality of this as a statement for the purpose an algorithms class, and if I am completely off target your suggestion for the purpose of a required Jr. level Algorithms class that is standalone (so no other classes focusing specifically on algorithms are required). The statement is as follows: The purpose of the algorithms class is to do three things: Primarily, to teach how to learn, do basic analysis, and implement a given algorithm found outside of the class. Secondly, to teach the student how to model a problem in their mind so that they can find a an existing algorithm or have a direction to start the development of a new algorithm. Third, to overview a variety of algorithms that exist and to deeply understand and analyze one algorithm in each of the basic algorithmic design strategies: Divide and Conquer, Reduce and Conquer, Transform and Conquer, Greedy, Brute Force, Iterative Improvement and Dynamic Programming. The Question in short is: do you agree with this statement of the purpose of an algorithms course, so that it would be useful in the real world, if not what would you suggest?

  Read the article

• using Moniker.com's nameservers

  - by user7519

  I have a VPS with A2Hosting for which i need to upgrade the OS. However, they've changed their VPS packages and forced me to order a new one. I went with an "unmanaged" package and have only just realised that they do not provide any DNS service at all, not even nameservers. Support tells me that "since your domain is not hosted with us, but with Moniker, you would not be able to use these nameservers. Your domain registrar should have a set of default nameservers that you can use, then create a A record to point to" my IP address. Moniker does provide for using their nameservers but i'm confused about which "pre-defined zone configuration" to use. They are: Domain Parking Domain Parking with Email Forwarding URL and Email Forwarding URL Forwarding URL Forwarding & CoolHandle Email I just want to use their nameserver and then create A & MX records pointing to the VPS. What do they mean by forwarding? I get the feeling it's a service that i don't want. Or, is it that i need to have a pre-defined zone only temporarily, and THEN set the A & MX? Which of these should i choose.

  Read the article

• Help Creating a Google Analytics Funnel for Check out process

  - by Drew

  have a funnel question. I am currently working on tracking (through GA) guest and logged in member activity once they get to my sites shopping cart. But need help with setting up funnels. Specifically to see; Total sales Logged in member total sales List item Guest member sales The urls associated to the check out proces are: Logged in members /cart (arriving to checkout) /checkout (checking out as a logged in member) /checkout/confirmation (thank you - confirmed sale) Guest members - /cart (arriving to checkout) - /checkout-guest (checking out as a guest) - /checkout/confirmation (thanks you - confirmed sale) I've tested the funnels set up for the above with 9 transactions. But the end maths doesn't seem to line up. Total sales funnel shows 9 completed transactions when only tracking these to urls: - /cart - /checkout/confirmation Which is great - cause it's working Logged in member sales show a total of 9 completed transactions based on each step of the logged in url steps (above) being tracked in a funnel. Not good because this number should be 3. Guest check out funnel (see guest steps above) shows 9 as well. What the?!?!?!? The results I am looking for should reflect the following - total sales = 9, logged in members = 3, guest members = 6 Is there any way to set these urls up so that the funnels report the correct results - or do I need to changed the urls and provide logged in members and guest stand alone purchase confirmation pages (this would mean I can not track total sales which combine results from both streams)? Any knowledge in this area is welcome. Thanks.

  Read the article

• New York Alt.NET Dinner

  - by Liam McLennan

  While I was in the New York area Stephen Bohlen graciously organised an Alt.NET dinner. I left Rockville Centre on the 17:15 train, thinking I had plenty of time to get to Toloache Mexican Bistro on W 50th St. However, when I changed at Penn Station I took the service downtown, instead of uptown. I corrected that mistake and made it to 51st St, but then ended up in completely the wrong place because I did not understand the street numbering system. For future reference I now have the following rules for NYC navigation: Uptown means North, Downtown means South Streets run East-West, Avenues North-South Street number are symmetrical on the 5th Avenue axis. That is, street numbers increase from zero both east and west of 5th Av. Having gotten totally confused I called Steve, who helped me find the restaurant. I still had my luggage, which we stowed in a corner. Over some descent Mexican food we had some great discussions about Alt.NET, the 2010 conference, and other things of interest to Alt.NET folks. Thanks to Steve for organising and to all the guys who turned up.

  Read the article

• Managing the Domino Effect (with Tutor Publisher Reports)

  - by [email protected]

  When an organization upgrades their business application or improves a process, it triggers changes that will reverberate throughout an organization, like a falling row of dominoes standing on end. A tangible and repeatable way to communicate change is with updated process documentation. But how do organizations get their arms around all the documents that are impacted by an application upgrade or process improvement? A small change in one place will trigger subsequent changes in other areas. A simple domino chain of questions can go like this. What screens have changed? Do the new screens change the process in place? In what procedural documents are the screens referenced? Who uses the screens and must be notified of the changes? What other documents are affected? Will the change affect current company policy? Tutor Publisher compiles focused, easy to read impact analysis reports of your process documentation library that answer these tough questions. Tutor reports make it easy to quickly target the information and documents that require updating. In turn, the updated documents are used to communicate the change. The Tutor writing methodology and Publisher reports provide organizations the means to confidently keep documentation in sync with the way the business runs. Start managing the domino effect in your organization. Get a grip on it here!

  Read the article

• how to retrieve img alt text with jquery or javascript? [on hold]

  - by kate

  Which is the code with which we can retreive alternative text of image: It is a Cataloge with clothes. Dressers, Shirts, Skirts e.t.c. in front page of a site. The featured images of the categories can be changed manually from someone. I did a check and it is asking me to give alt text. I did it to some images with alt="". But to the cataloge I cannot do it. the code is below: {{ 'option_selection.js' | shopify_asset_url | script_tag }} {{ 'api.jquery.js' | shopify_asset_url | script_tag }} {% if template contains 'customers' %} {{ 'shopify_common.js' | shopify_asset_url | script_tag }} {{ 'customer_area.js' | shopify_asset_url | script_tag }} {% endif %} {% if settings.display_slideshow %}{{ 'jquery.slider.js' | asset_url | script_tag }}{% endif %} {% if settings.include_masonry %}{{ 'jquery.masonry.js' | asset_url | script_tag }}{% endif %} {% if settings.enable_product_image_zoom %}{{ 'jquery.zoom.js' | asset_url | script_tag }}{% endif %} {{ 'fancy.js' | asset_url | script_tag }} {{ 'shop.js' | asset_url | script_tag }} Shopify.money_format = '{{ shop.money_format }}'; {% if template contains "product" %} jQuery(document).ready(function($){ {% if product.variants.size 1 or product.options.size 1 %} new Shopify.OptionSelectors("product-select", { product: {{ product | json }}, onVariantSelected: selectCallback }); {% assign found_one_in_stock = false %} {% for variant in product.variants %} {% if variant.available and found_one_in_stock == false %} {% assign found_one_in_stock = true %} {% for option in product.options %} $('#product-select-option-' + {{ forloop.index0 }}).val({{ variant.options[forloop.index0] | json }}).trigger('change'); {% endfor %} {% endif %} {% endfor %} {% endif %} }); $(function() { $( "#tabs" ).tabs(); });

  Read the article

• OpenGL profiling with AMD PerfStudio 2

  - by Aurus

  I'm rendering just a really small amount of polygons for my UI but however I still tried to increase the FPS. In the end I removed redundant calls which increased the FPS. I really don't want to lose FPS for nothing so I keep looking for more improvements. The first thing I noticed is the "huge" time where no calls are made before SwapBuffer (the black one). Well I know that OpenGL works asynchronous so SwapBuffer has to wait until everything is done. But shouldn't PerfStudio mark this time also as black ? Correct me If I am wrong. The second thing I noticed is that some glUniform2f calls just take longer (the brown ones). I mean they should all upload 2floats to the GPU how can the time be so different from call to call. The program isn't even changed or something like that. I also tried to look at other programs like gDebugger or CodeXL but they often crashed and they show less statistics (only # of calls or redundant calls etc.) EDIT: I also realized that the draw calls also have different durations, which was obvious for me but sometimes drawing more vertices is faster than drawing less vertices.

  Read the article

• Too much I/O in the morning ?

  - by steveh99999

  Interesting little improvement on a SQL 2005 system I encountered recently….. Some background - this system had a fairly ‘traditional OLTP’ workload ie  heavily used during day – till around 9pm, then had a batch window for several hours, then not much activity in the early hours of the day, until normal workload resumed the following morning. Using perfmon, I noticed that every morning, we would see a big spike in SQL Server I/O when the application started to be used... As it was 2005 I decided to look at what tables were in cache before and after the overnight batch processing ran… ( using DMV equivalent of dbcc memusage that I posted earlier). Here’s what I saw :-     So, contents of data cache split fairly evenly between my 'important/heavily used' tables.   After this:- some application batch processing,backups, DBCC checks and reindexes were run.  A fairly standard batch I'd suggest. Cache contents then looked like this :- Hmmmm – most of cache is now being used by a table I’ve described as ‘unimportant’. Why ? Well, that table was the last to be reindexed…. purely due to luck, as  the reindexing stored procedure performing a loop in alphabetical order through all application tables...  When the application starts to be used again – all this ‘unimportant’ data has to be replaced in cache by data that is heavily used… So, we changed the overnight reindex scripts –  the most heavily accessed tables are now the last to be reindexed. Obvious really, but we did see a significant reduction in early-morning I/O after changing the order of our reindexing.  

  Read the article

• Calculating a child Position, Rotation and Scale values?

  - by Sergio Plascencia

  I am making my own game editor(just for fun) anyway I have problem that I had several days trying to resolve but I have been unsuccessful. Here goes... I have an object "A": Position: (3,3,3), Rotation: (45,10,0), Scale(1,2,2.5) And an object "B": Position: (1,1,1), Rotation: (10,34,18), Scale(1.5,2,1) I now make a parent/child relationship. "B" is a child of "A": A |--B When I do the relationship I need to re-calculate the Child("B") Position, Rotation and Scale such that it maintains its current position, rotation and scale(Location in world). So for child position "B" it would now be (-2, -2, -2) since now "A" it is center and (-2, -2, -2) will keep the object in its same position. I think I got the Position and scale figure out, but rotation I cant. So I was trying to figure out what to do and what I did is opened Unity and run the same example and I did noticed that when making an abject a child object the child object did not moved at all but had its Position, Rotation and Scale values changed(Related to the parent). For example: Unity (Parent Object "A"): Position: (0,0,0) Rotation: (45,10,0) Scale: (1,1,1) Unity (Child Object "B"): Position: (0,0,0) Rotation: (0,0,0) Scale: (1,1,1) When making it a parent child relation("B" is a child of "A") the child object("B") in its Rotation values now has: X: -44.13605 Y: -14.00195 Z: 9.851074 If I plug the same values to my editor(To the child "B" rotation X, Y, Z values) the object does not move at all. So I basically need to know how did Unity arrive at those rotation values for the child(What are the calculations?). If you can help and put all the equations for the Position, Rotation or Scale then I can double check I am doing it correctly but with the Rotation I really need help. Thanks!

  Read the article

• How do I install Postgres Graphical Installer?

  - by Tusar Das

  I am a newbie in using Ubuntu (more precisely never used linux except the production deployment ). Now I choose to hold a grip on the system and intalled a latest 11.10 Ubuntu in my 32 bit Intel** desktop. In this machine **I have a 'administrator' user 'tusar'. I want to install the PostgreSQL graphical version so downloaded this file postgresql-8.4.9-1-linux.bin from here Now If run the file with ./filename command (refuses if I am not root), it opens up the graphical interface and completes the installation (creates user postgres and ask for password, wont complete if I dont give valid password). I checked with /etc/inint.d/postgresql-8.4 status , that postgres is running. But the problem is I am unable to open the GUI (I installed it in /opt/Postgresql ), its telling permission denied even if I am logged in as 'tusar'. Then I tried using the su postgres command and it directly changed the user without password. Now if I run the psql , createdb , its prompting me to install the postgres-client-package but this utilies are already installed and I can view them in my /opt/Postgresql/8.4/bin folder. I can run query through my JDBC utility programs but unable to use neither terminal nor the graphical interface (although I can see pgAdmin3 is there ). Urgent help needed. I have used this guide for the installation.

  Read the article

• Ubuntu doesn't boot after adding a bootflag to the Windows partition

  - by Nils

  I have Ubuntu 10.10 installed on one (physical) hd and on the other one Windows. On both drives grub is installed to boot both operating systems. When I wanted to install SP1 for Win 7 I had to add a bootable flag to the partition from which Windows boots, otherwise the installation of SP1 does not work. I did so by booting into Ubuntu and using gparted to add this flag. After doing so the update for SP1 worked without any problems. When trying to boot back into Ubuntu grub complained that it couldn't find the kernel anymore! I tried to boot into a Ubuntu minimal cd and to restore grub using chroot, update-grub and grub-install which didn't work. I still had the problem that it was Unable to boot Ubuntu putting me in some minimal system called initramfs. It seems however that the uuid of the partitions changed. I guess this happened when I added the bootflag to the windows disk. Next thing I tried was to tell grub not to use the uuid for loading the kernel by uncommenting something in /etc/default/grub. Then I got the kernel booting but it suddenly stops (I guess when it is trying to mount the root file system) saying that the concerning uuid does not exist putting me into initramfs again. The strange thing is that there I coulnd't even manage to mount the root partition using /dev/sdb1 (on which it is in my case). I would be glad if there is a way to restore the system again without having to reinstall it.

  Read the article

• Problem with sound driver

  - by JiminP

  I had problem that sound had lag in Flash. (Other than that, there was no problem.) On the internet, I found that installing OSS4 might help me. So I installed OSS4, but there was some problems (no sound on Flash, and couldn't use function key on the laptop - which is quite annoying), so I try to remove OSS4 and re-installing sound modules. After some mess-up, the whole sound was gone. I used Ubuntu for a year, but I don't know how to use the terminal well (All I know is basic commands like sudo, ls, or apt-get).. Now I'm trying to recover by following instructions at this page, but I have some problems... :( When I try to follow instructions: sudo aplay -l finds no sound drivers. find /lib/modules/'uname -r' | grep snd (backtick changed to ' due to code markup) returns nothing. When I try to do sudo apt-get install linux-restricted-modules-'uname -r' linux-generic, it says that it can't find linux-restricted-modules-3.0.0-13-generic package. lspci -v | grep -A7 -i "audio" returns this, which doesn't contain anything about the name of the driver. Writing sudo modprobe sn and pressing tab twice only returns sudo modprobe sn9c102. sudo aptitude --purge reinstall linux-sound-base alsa-base alsa-utils linux-image-'uname -r' linux-ubuntu-modules-'uname -r' libasound2 returns this, and didn't change non of above. sudo apt-get install linux-alsa-driver-modules-$(uname -r) fails because it can't find the package linux-alsa-driver-modules-3.0.0-13-generic. Compiling ALSA driver doesn't work. When I try to make, it says that /lib/modules/3.0.0-13-generic/build/include/linux/modversions.h doesn't exist. I'm using Ubuntu 11.10. Can anyone help me? I can re-install Ubuntu, but I don't want to....

  Read the article

• Order in which passphrase is asked for encrypted volumes

  - by Lars Kotthoff

  I have installed 12.10 on a machine with two disks. The root partition is on one disk, the swap partition on the other. Both disks are encrypted and I have added the corresponding entries to /etc/crypttab. During boot, it asks for the passphrase for the disk with the root filesystem. Then it continues booting and gets to the login screen before I get a chance to enter the passphrase for the other disk. After logging in, I verified that it was actually waiting for me to enter the passphrase for that second partition (askpass process is running). But at that point, I have no way of entering the passphrase anymore. The manpage for crypttab suggests that the order in which the volumes are specified matters, so I changed it to have the swap disk first. I updated the initramfs and grub afterwards, but it didn't make any difference. How can I specify the order in which the encrypted partitions are unlocked? I'm looking for a solution that either asks for the swap passphrase first or tells the system to wait until all encrypted partitions are unlocked before displaying the login screen.

  Read the article

• using a wiki for requirements

  - by apollodude217

  Hi, I'm looking into ways of improving requirements management. Currently, we have a Word document published on a Web site. Unfortunately, we cannot (to my knowledge) look at changes from one revision to the next. I would greatly prefer to be able to do so, much like with a wiki or VCS (or both, like the wiki's on bitbucket!). Also, each document describes changes devs are expected to meet by a given deadline. There is no collection of accumulated app features documented anywhere, so it's sometimes hard to distinguish between a bug and a (poorly-designed) feature when trying to make quick fixes to legacy apps. So I had an idea I wanted to get feedback on. What about: Using a wiki so that we can track who changed what when (mostly to even see if any edits were made since the last time one looked). Having one, say, wiki page per product rather than one per deadline, keeping up with all features of the product rather than the changes that should be implemented. This way, I can look at a particular revision of the page to see what the app should do at a given point in time, and I can look at changes to the page since the last release for the requirements to be implemented by the next deadline. Waddayathink?

  Read the article

• Can I host a website on a different address from the webmail?

  - by Andrew

  I have what is to me an unusual situation. I have a client for whom I have built a website which I will be hosting, they have been using their domain name for their email addresses for a long period before I came along so moving their email account to my host would be problematic and building the website with their current host would also be problematic because their host is very restrictive. So to fix this I altered the A record in their existing control panel to point the domain name to my server. As a result I can see the pages that I have created at their domain and they can still access their existing webmail. However, it appears that they are now experiencing problems receiving email so I can only assume my solution was incorrect. What is the correct way to point their domain at my website but keep their webmail with the existing host? EDIT: 25/5/2012 - My client has finally responded to me after changing the MX record on their existing C-Panel. Email to their email address were being bounced back with the error 'no such recipient', so I set up the same email address in the new C-Panel and changed the MX record there to 'Remote mail exchanger' which has stopped the emails bouncing but has apparently lost them in cyperspace! Unfortunately I can't add a new record because this would require a fully qualified domain name and their domain name is of course pointed at our server!

  Read the article

• Silverstripe: How can I disable comments?

  - by SamIAm

  My client site is built in Silverstripe, there is a news page, and it allows people to leave comments. Unfortunately we've got loads of spam emails. I'm new to this, is there any way we can disable the comment field by default? How do I do it? Alternatively is there easy way for me to install a spam protection? Update - Because this is someone else's code, I just realised that they have some sort of spam protection already, so we are trying to disable comments now. I have manage to set no comment as default by changing file BlogEntry.php static $defaults = array( "ProvideComments" => true, 'ShowInMenus' => false ); to static $defaults = array( "ProvideComments" => false, //changed 'ShowInMenus' => false ); Am I on the right track to disable comments by default? Also how can I stop on the news page showing xxx comments link? eg Test Posted by Admin on 21 June 2011 | 3 Comments Tags: P This is a test.... 3 comments | Read the full post

  Read the article

• The effects of Agile Programming can alter the five desirable properties of modeling tools and techniques

  The effects of Agile Programming can alter the five desirable properties of modeling tools and techniques as documented by Pfleeger. The agile methodology does promote human understanding and communication through the use of short iterative software development life cycles which forces stakeholders to review the project and adjust the project for any requirement changes.  Due to the consistent evaluations of a project and requirements, process are continually being refined, upgraded, and compared against other alternatives to ensure the best design delivered to the client. Due to the short repetitive development cycles, increased time is devoted to process management due to the fact that requirements and designs could be constantly changing. This requires additional forecasting, monitoring, and planning for each iteration. Because things can change so rapidly, automated guidance in performing process must be updated for each iteration because the environment and the available reusable process could change. In addition, the original guidance and suggestions for the project also need to be updated to account for these changes as well.   In essence the automation of process execution is supported by the agile methodology because during every iteration all processes must be tested, evaluated to ensure process integrity and compliance with the customer’s requirements. I do not think the agile approach diminishes modeling, in fact I think it increases the modeling because before the start of every development cycle, modeling must be checked for accuracy based on the changed requirements. So in essence the reduced time spent initially designing the models is in fact gained as the project completes every iteration of the project.

  Read the article

• Ubuntu boot problem/unity failure

  - by Kenny

  So here I am sitting in a big pile of muck...over the last 2 days things have just been going from bad to worse with version of Ubuntu 12.10. So 2 days ago I was fiddling around with kismet and airmon-ng. I had added a bunch of libraries, I remember adding GTK+, Glib, Pango, etc. After restarting the other day my desktop opened fine but my background was changed to the default and none of my files on the desktop were visible and the top bar and side bar were not visible or functioning. The window managers were still working. I then tried reinstalling my nvidia drivers to see if that would change anything, it did not. Then after doing some searching online I found something that suggested I try deleting the file "libgtk-3.so.0". I deleted this and tried to restart the computer. Upon restart, I was greeted by a black screen with some writing saying something about -starting clamAV [OK] -problem with Apache Server could not verify correct...something... - checking battery state [ok]. After it gets to battery state it just stops and sits there indefinitely. So to sum, I cannot login to ubuntu because it just sits at this black screeen. If anyone has any idea as to what is going on and how to fix it please let me know. Thanks!

  Read the article

• I'm stuck on User Defined Session destop environment

  - by Dan

  I just installed Ubuntu for the first time dual boot so I get to choose Ubuntu or windows. I then changed the setting where is doesn't ask for my password when booting up. I then installed Edubuntu desktop package. I then hit system and logged out that way i could be at the loggin screen that also lets you select the desktop environment. Edubuntu was not there but User defined session was so i clicked that thinking that might be Edubuntu and logged in. Now im totally stuck. Only walpaper on the screen as i realize now that is normal for user defined session but there is no log out button to change desktop environments now and since I set it to not ask for password at boot up there is no option to change it at start up. If i hit ctrl+alt+del it only lets you shutdown, restart, suspend, or hybernate.... no logg out. I have hit every key on the keybourd hoping something will pop up. I thought this must be a simple noob mistake that there must be endless artiles about this so did searches on google and forums and was shocked to find nothing about this. My next step unless someone can help is to uninstall and reinstall.

  Read the article

• why is glVertexAttribDivisor crashing?

  - by 2am

  I am trying to render some trees with instancing. This is rather weird, but before sleeping yesterday night, I checked the code, and it was in a running state, when I got up this morning, it is crashing when I am calling glVertexAttribDivisor I haven't changed any code since yesterday. Here is how I am sending data to GPU for instancing. glGenBuffers(1, &iVBO); glBindBuffer(GL_ARRAY_BUFFER, iVBO); glBufferData(GL_ARRAY_BUFFER, (ml_instance->i_positions.size()*sizeof(glm::vec4)) , NULL, GL_STATIC_DRAW); glBufferSubData(GL_ARRAY_BUFFER, 0, (ml_instance->i_positions.size()*sizeof(glm::vec4)), &ml_instance->i_positions[0]); And then in vertex specification-- glBindBuffer(GL_ARRAY_BUFFER, iVBO); glVertexAttribPointer(i_positions, 4, GL_FLOAT, GL_FALSE, 0, 0); glEnableVertexAttribArray(i_positions); glVertexAttribDivisor(i_positions,1); // **THIS IS WHERE THE PROGRAM CRASHES** glDrawElementsInstanced(GL_TRIANGLES, indices.size(), GL_UNSIGNED_INT, 0,TREES_INSTANCE_COUNT); I have checked ml_instance->i_positions, it has all the data that needs to render. I have checked the value of i_positions in vertex shader, it is the same as whatever I have defined there. I am little out of ideas here, everything looks pretty much fine. What am I missing?

  Read the article

• SSIS Send Mail Task and ForceExecutionValue Error

  - by Kevin Shyr

  I tried to use the "ForcedExecutionValue" on several Send Mail Tasks and log the execution into a ExecValueVariable so that at the end of the package I can log into a table to say whether the data check is successful or not (by determine whether an email was sent out) I set up a Boolean variable that is accessible at the package level, then set up my Send Mail Task as the screenshot below with Boolean as my ForcedExecutionValueType.  When I run the package, I got the error described below. Just to make sure this is not another issue of SSIS having with Boolean type ( you also can't set variable value from xp_cmdshell of type Boolean), I used variables of types String, Int32, DateTime with the corresponding ForcedExecutionValueType.  The only way to get around this error, was to set my variable to type Object, but then when you try to get the value out later, the Object is null. I didn't spend enough time on this to see whether it's really a bug in SSIS or not, or is this just how Send Mail Task works.  Just want to log the error and will circle back on this later to narrow down the issue some more.  In the meantime, please share if you have run into the same problem.  The current workaround is to attach a script task at the end. Also, need to note 2 existing limitation: Data check needs to be done serially because every check needs to be inner join to a master table.  The master table has all the data in a single XML column and hence need to be retrieved with XQuery (a fundamental design flaw that needs to be changed) The next iteration will be to change this design into a FOR loop and pull out the checking query from a table somewhere with all the info needed for email task, but is being put to the back of the priority. Error Message: Error: 0xC001F009 at CountCheckBetweenODSAndCleanSchema: The type of the value being assigned to variable "User::WasErrorEmailEverSent" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object. Error: 0xC0019001 at Send Mail Task on count mismatch: The wrapper was unable to set the value of the variable specified in the ExecutionValueVariable property.   Screenshot of my Send Mail Task setup:

  Read the article

• Google ranking, page crawl

  - by Nawaf Mubarak

  please don't mind me for asking this newbie question about Google ranking. I know that in order to get ranked the page has to be crawled by Google bots, I have had a page example of which I will get a better understanding of how the system works with Google. I have made a page on my website last month, it got indexed pretty quickly, then I found that it's in Google's page 15 on my keyword as a start, next day it made it to page 13, then after a week it was jumping back and forth in page 17/18 up to 20. Now a month passed by, when and it isn't listed in any position of that 'keyword' sometimes I will find it in page 30, but later I won't find it anywhere, keep happening this way these days. Even if it isn't listed in any page for my keyword if I do a search for "site:thepageadress" it will be listed which means I'm not penalized and my page is there for google to see, but it isn't in the search result for my keyword. But when I write "site:thepage_adress" and I hit "search tools" option and click on "Past day" or "past week" it isn't listed, it is only listed when I click on "Past month" which I think means that Google indexed the page, looked at it once when I published it, and never looked at it again, is this a fair statement? So two questions that comes to mind here. 1- Should Google keep looking at a page even if I haven't changed any info for it? and is this an indication for me that my page is doing fine? or is it normal that Google see's it once and thats it? 2- Why and how to fix the fact that my page keeps jumping back and forth in the ranking result for keyword, and sometimes it isn't even listed, what does that mean? Sorry for the long msg, I hope to god that somebody help me with this. Thank you!

  Read the article

• MySQL Connector/Net 6.8.1 beta has been released

  - by Roberto Garcia

  Dear MySQL users, MySQL Connector/Net 6.8.1, a new version of the all-managed .NET driver for MySQL has been released. This is a beta release for 6.8.x and it's not recommended for production environments. It is appropriate for use with MySQL server versions 5.0-5.6 It is now available in source and binary form from http://dev.mysql.com/downloads/connector/net/#downloads and mirror sites (note that not all mirror sites may be up to date at this point-if you can't find this version on some mirror, please try again later or choose another download site.) The 6.8.1 version of MySQL Connector/Net has support for Entity Framework 6.0 and includes: - Changed EF migration history table to use a single column as primary key.- Removed installer validation when MySql for Visual Studio is installed.- Added idempotent script for Entity Framework 6 migrations.- Fix for WI #824, Connector/NET writes wrong version for binding redirects.- Fix for WI #825, Connector/NET 6.8.1 writes wrong namespace for binding redirects. The release is available to download at http://dev.mysql.com/downloads/connector/net/#downloads Documentation ------------------------------------- You can view current Connector/Net documentation at http://dev.mysql.com/doc/refman/5.6/en/connector-net.html You can find our team blog at http://blogs.oracle.com/MySQLOnWindows You can also post questions on our forums at http://forums.mysql.com/ Enjoy and thanks for the support! Connector/NET Team

  Read the article

• Refactoring and Open / Closed principle

  - by Giorgio

  I have recently being reading a web site about clean code development (I do not put a link here because it is not in English). One of the principles advertised by this site is the Open Closed Principle: each software component should be open for extension and closed for modification. E.g., when we have implemented and tested a class, we should only modify it to fix bugs or to add new functionality (e.g. new methods that do not influence the existing ones). The existing functionality and implementation should not be changed. I normally apply this principle by defining an interface I and a corresponding implementation class A. When class A has become stable (implemented and tested), I normally do not modify it too much (possibly, not at all), i.e. If new requirements arrive (e.g. performance, or a totally new implementation of the interface) that require big changes to the code, I write a new implementation B, and keep using A as long as B is not mature. When B is mature, all that is needed is to change how I is instantiated. If the new requirements suggest a change to the interface as well, I define a new interface I' and a new implementation A'. So I, A are frozen and remain the implementation for the production system as long as I' and A' are not stable enough to replace them. So, in view of these observation, I was a bit surprised that the web page then suggested the use of complex refactorings, "... because it is not possible to write code directly in its final form." Isn't there a contradiction / conflict between enforcing the Open / Closed Principle and suggesting the use of complex refactorings as a best practice? Or the idea here is that one can use complex refactorings during the development of a class A, but when that class has been tested successfully it should be frozen?

  Read the article

< Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >