Search Results

Search found 11229 results on 450 pages for 'quirks mode'.

Page 196/450 | < Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >

• Gaming with ATI open-source drivers

  - by user7174

  I have recently bought humble bundle 2 ( http://www.humblebundle.com/ ). Is there a way to run Braid using ATI's open-source drivers? The game always crashes. When do get it to start in windowed mode once i go to the first level it will crash. I am using the lastest version of Braid (ST3C ignored) When I use the proprietary drivers Braid works flawlessly and World of Goo performance is increased. However there is terrible screen tearing with the ATI propritary drivers. So my question is: How do I play Braid if I want to use the proprietary drivers?

  Read the article

• Power Management - Sleep / Wake up Server when accessed

  - by KP65

  I have a headless HP Proliant Microserver with ubuntu installed. This machine has samba shares on it serving media and I usually rdp or ssh into it. Now my issue is I want the machine to go into sleep mode(so the state is saved from ram to the harddrive) and it will seem like it is turned off after an hour of idling. If there is any attempt to access the samba share through LAN I would like it to wake up. Now my motherboard supports this function, can anyone point me in the right direction for achieving this easily? Thanks

  Read the article

• WinXp display driver incorrect to boot iso ubuntu 12.04

  - by user285829

  I have Windows Xp on a HP Pavilion w/AMD Athlon 64 processor 3300+. I have downloaded Ubuntu 12.04 iso desktop. When trying to run Ubuntu, I get a line that says "sis 630 buss not detected. It continues and makes a blue screen, then says low graphics mode only and has a white screen. The HP has display adaptor sis 760, driver= 6.14.10.3671, 4/20/2005. I'm not familiar with ubuntu because I've never got it started as yet. Can the Ubuntu install process be changed to accept my sis 760 driver? I'm trying to make a Live CD(dvd) to run Ubuntu.

  Read the article

• How do I remove only some values of a URL parameter in Google Analytics?

  - by Iain Hallam

  I'm using Google Analytics on a DokuWiki site, which uses a URL parameter to decide what to do with the current page: /page is equivalent to: /page?do=show 1) I want to see some of these "modes", but mostly I'd like them counted as viewing the bare page URL itself. The following are the only ones I want to see separately: /page?do=login /page?do=backlinks /page?do=revisions /page?do=subscribe How do I collapse the unwanted modes to the page itself (/page)? 2) Some modes do something that should really not have a page attached, such as: /page1?do=sitemap /page2?do=sitemap How do I get these to show up without the page part (/?do=sitemap)? 3) What do I do with the search mode? Can I remove the page part from this too, and still find out which page people used the search function on? /page?do=search&id=query+text

  Read the article

• Hibernation is still missing from menu in 13.10 after enabling via polkit. How to enable?

  - by LiveWireBT

  I know that since 12.04, we need to add a policykit rule to enable hibernation (see question How to enable hibernation? and the Official Documentation). I can successfully bring my laptop into hibernation mode with sudo pm-hibernate or sudo s2disk, so the rule is in place and works, but the hibernation entry is still missing in the menu. I can tell from looking through the source of the indicator-session package (but not understanding the whole code) that there is still a hibernation menu entry in the code and it should be displayed when the system is capable of hibernating. Please calm down if you're enraged by this. This is very unlikely to be a conspiracy, but rather a bug/regression on a deeper level, which can happen when you move code around or replace it. Question: What needs to be done in 13.10 to properly tell indicator-session that the system can hibernate? Possible duplicate: Hibernation still not available - No activity, because saucy was in development at that time, so out of scope for AskUbuntu. Related bug report: https://bugs.launchpad.net/ubuntu/+source/indicator-session/+bug/1232814

  Read the article

• Weird issue with iptables redirection

  - by skypemesm

  I am trying to redirect all incoming traffic on UDP port 5060 to port 56790, and all outgoing traffic from 5060 to the port 56789. I used these iptables rules: iptables -t nat -I PREROUTING -p udp ! -s localhost --dport 5060 -j REDIRECT --to-port 56790 iptables -t nat -I OUTPUT -p udp ! -s localhost --sport 5060 -j REDIRECT --to-port 56789 I listen on both ports using RAW SOCKETS after setting the interface to PROMISCUOUS mode using ioctl. I see packets ONLY on 56789 i.e.SENDING side, and I do not see any packets on 56790, while wireshark shows that many packets are delivered to port 5060. Why would this happen? Any ideas? Do you think it's a problem with iptables rules or something to do with raw sockets? [This is ubuntu 10.04 and iptables v1.4.4]

  Read the article

• after upgrade from 10.04 to 10.10, no keyboard, cannot login

  - by avar

  Hello, just did upgrade from kubuntu 10.04 to 10.10.. after all done and reboot, when the login box shows up, my keyboard and laptop pad ( mouse ) dosn't work, (plugged in the usb mouse, it works sometimes) but never keyboard. i went to recovery , the boot hung up when it says : [ 17.704053] EXT4-fs (sda9): mounted filesystem with ordered data mode Begin: Running /scripts/local-bottom ... Done. Done. Begin: Running /scripts/init-bottom ... Done. stuck here. nothing works except ctrl+alt+del i tried booting from livecd and update-grub, also tried booting manually from grub command line, everytime it stuck at lines above .. so it's not grub problem . how to solve this ? if it is important, i have ATI mobility radeon HD 5470 card .

  Read the article

• La place de marché des Google Apps se dote de 16 nouveaux services en ligne, pour les entreprises et

  La place de marché des Google Apps se dote de 16 nouveaux services en ligne, des outils variés pour les entreprise et les administrateurs Le Google Apps Marketplace, lancé le 10 mars dernier à destination des entreprises, vient de se voir crédité de 16 nouveaux services en ligne, s'appliquant à des domaines aussi divers que le collaboratif ou bien le montage vidéo. Certaines de ses nouveautés sont payantes, les autres sont gratuites. Toutes sont proposées par des éditeurs tiers. Les administrations trouveront leur bonheur parmi ces outils divers et variés, dont voici un petit tour d'horizon : - Applane CRM : solution de gestion de la relation client en mode hébergé accessible depuis Google Universal Na...

  Read the article

• How do I get to the maintenace shell?

  - by Narida

  I'm asking this because initially, my problem was this (power failure during installation, so I typed the following instructions in the maintenance shell: sudo mount -o remount,rw / sudo dpkg --configure a sudo mount -o remount,ro / sudo sync sudo reboot The first three lines worked, afterwards, my computer (a Dell Inspiron 530) got stalled for several hours, so I unplugged it. When I turned it on, the log in screen appeared, and after I try to write my password, it leads me back to the log screen. I must note that when I typed the first three lines during the maintenance shell mode, it said that the errors which were encountered during processing were: initscripts bluez gnome-bluetooth So, what do I have to do in order to get back to the maintenance shell so I can type code again? And, what code do I have to write in order to restore my computer? Thank you for your attention.

  Read the article

• .htaccess 301 Redirect for wildcard subdomains

  - by Steve

  I run Wordpress in Network mode, which means I can have multiple websites running off one installation of Wordpress. Each website runs as a subdomain. Wordpress handles this using .htaccess, and a wildcard subdomain pointing to the location of Wordpress, so there are no actual subdomains created in cPanel; just a wildcard subdomain in cPanel, ad Wordpress handles the rest. I want to 301 redirect http://one.example.com/portfolio to http://two.example.com/portfolio. If I only have 1 .htaccess file in the web root of example.com, how do I achieve this?

  Read the article

• XRegExp Regular Expression Library for JavaScript

  - by Jan Goyvaerts

  XRegExp is an open source JavaScript library. It extends JavaScript’s regex syntax with features such as free-spacing, named capture, mode modifiers, and Unicode categories, blocks, and scripts. It also provides its own test(), exec(), forEach(), replace(), and split() methods that eliminate most cross-browser inconstencies and bugs. Anyone using non-trivial regexes in their JavaScript code should seriously consider using XRegExp. Last month’s update of the Regular-Expressions.info website added full coverage of XRegExp to the regex tutorial and regex reference sections. But the tools & languages section was missing the XRegExp page, resulting in broken links in the tutorial and reference sections. This page has now been added.

  Read the article

• XBMC using a lot of CPU when fullscreen

  - by hafichuk

  I'm just starting to try out XBMC (from the ubuntu repo) and noticed that it's using a lot of CPU when running fullscreen, even when I'm not playing a movie. There's a definite lag even on the home page with the scrolling footer. I've toggled the option to use it in windowed mode and it seems to be a lot more responsive. The footer lag seems to be gone. Does anyone know why this is happening? I would have thought that running fullscreen would have used less resources.

  Read the article

• Shader Model 3.0 not available

  - by Romy

  I have Acer 4745G with ATI HD 5650 1GB VRAM. After I installed the COD Black Ops trough Wine Playonlinux and successfully installed, and I play the game and then appear message "Shader Model 3.0 not available". I have installed ATI driver 11.8 when I trying this game. And then I'm trying to install the driver from menu "System Administration Additional Driver, it doesn't work. I cannot log in, in the screen appear only the text for log in. And then I uninstall it trough recovery mode. And then I download ATI driver 11.11 from official ATI/AMD website, and then I restart my computer and my screen appearing only text again. I'm using Ubuntu (Ultimate Edition) 11.04. How to overcome this problem?

  Read the article

• Wireless problems on HP

  - by Sat93

  I'm not able to enable Wireless using the hardware switch on my HP ProBook4430s. Because of this the Enable Wireless option is greyd out and I cannot enable it. The greyd out option can be seen in the screenshot below. The results of iwconfig for my system are as follows, lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off eth0 no wireless extensions. Also I tried to do the following, sudo ifconfig wlan0 up but I got an error as below, SIOCSIFFLAGS: Operation not possible due to RF-kill Also the result of sudo rfkill list all for my system is as follows, 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no 2: hp-bluetooth: Bluetooth Soft blocked: no Hard blocked: no 3: hci0: Bluetooth Soft blocked: no Hard blocked: no How do I fix this problem? Thanku!

  Read the article

• Can't install ATI proprietary drivers in 12.10. Unity is Missing

  - by EApubs

  I have a laptop with ATI Radeon 6770M HD Hybrid graphics card. In Ubuntu 12.04, I installed the fglrx driver through "additional drivers" and it worked. (I can even switch GPUs). But in the new Ubuntu 12.10, after installing, Unity won't load. Only the mouse and the wallpaper. If I initialize the settings sudo aticonfig --initial then after rebooting it gives a warning saying I'm in low graphics mode! How to fix this? PS : Earlier i used software source to install the drivers. But when using the terminal, I got this warning : update-alternatives: warning: forcing reinstallation of alternative /usr/lib/fglrx/ld.so.conf because link group x86_64-linux-gnu_gl_conf is broken Update : Filed a bug report in launchpad : https://bugs.launchpad.net/fglrx/+bug/1068661

  Read the article

• HP dv2700 series, Wifi not working in Ubuntu 12.10, Wifi Button always disabled

  - by Chicoscience

  I have a HP dv2745se laptop. I always had Ubuntu with the Native Windows Vista and Wifi worked fine. Suddenly my Ubuntu wouldn't load anymore, I tried fixing it for a week and eventually I formatted its partition and just installed Ubuntu 12.10 This laptop has a Wifi switch that works fine in Vista disabling / enabling the wireless connection. HP Wireless Assistant in Windows say Wireless is on. However, whenever I log in Ubuntu the Wifi button is always orange (disabled) and Wireless never works. I had this problem once when I had Ubuntu 12.04 and I fixed it by verifying in Windows that the Wireless Assistant showed the Wireless LAN in "On" mode. However, the same does not work now. I've seen some possible solutions that involve updating the firmware with apt-get. There comes my 2nd problem, my network adapter card is not working and thus I have no internet at all. Any suggestions? Thanks!

  Read the article

• Is it possible to have my desktop loaded before login?

  - by Dims

  I am connecting to the system with Putty (this is Windows SSH client) then running some service in interactive personal mode. For example this is a script to run freeswitch: dims@nebulla:~$ cat freeswitch.sh #!/bin/sh cd ~/bin/freeswitch/bin gnome-terminal -e ./freeswitch & I.e. it is installed in user directory. Also DISPLAY is set to :0 The problem is that I can't use this script until login once. Script responds with dims@nebulla:~$ ./freeswitch.sh dims@nebulla:~$ No protocol specified Failed to parse arguments: Cannot open display: After login, I can do "Switch user" and see login screen but script will be able to run since desktop exists. My question is: is it possible to "preload" my desktop, so that initial situation was as if I loogged in and the went to switch user?

  Read the article

• How to setup a wifi ap hotspot with ipv6 support?

  - by keyman

  How to setup a wifi ap (access point mode) hotspot, with IPv6 support? I've set up a hotspot according to the guide to wifi ap hotspot setup and it works fine. But via the hotspot I failed to visit IPv6 websites. How can I setup a hotspot able to share Ipv6 Internet access? Thanks! Further: Actually I've tried to setup IPv6 forwarding and masquerading. First enabling IPv6 forwarding: echo 1 | sudo tee net/ipv6/conf/default/forwarding Then I tried to execute: sudo ip6tables -t nat -A POSTROUTING -s 2001:db8:0:1::/64 -o eth0 -j MASQUERADE But it gave me an error: ip6tables v1.4.12: Couldn't load target `MASQUERADE':No such file or directory I searched through the Internet but I get confused. So I'm here for help. Thanks!

  Read the article

• How to fix slow wireless with Intel 4965 AGN? [closed]

  - by mikewhatever

  Possible Duplicate: Slow wireless with an Intel 4965 We run Ubuntu 12.04, 32bit, with the current kernel 3.2.27-generic on an MSI EX700. I've already added the 11n_disable=1 tweek, without whcih, wireless has been unusable. Now, it works OK, but speedtest shows: Windows XP - down 11.68mbps, up 2.07mbps Ubuntu 12.04 - down 2.06mbps up 2.0mbps We've disabled ipv6, tried static and dinamic IPs, tried both swcrypto=0 and swcrypto=1 options, none of whcih made any difference. The problem may be the symptom of high packet loss. For example, here's the output of iwconfig after booting and testing the speeds: wlan0 IEEE 802.11abg ESSID:"amu" Mode:Managed Frequency:2.462 GHz Access Point: 00:78:9E:FA:32:C8 Bit Rate=54 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=58/70 Signal level=-52 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:11 Invalid misc:3627 Missed beacon:0 I've posted a help request before with lots of technical info and outputs.

  Read the article

• Only one resolution available in Xorg.conf

  - by Kévin Guilbeault

  I recently upgraded to Ubuntu 12.10 and when I try to change my resolution in NVIDIA X server settings, I only get the native one (1600x900). When I had 12.04 installed, all resolutions were available in the drop down list. My goal is to have twinview working again. I used to set my two screens to twinview and clones, using my HDTV resolution (1360x768) which was previously available in 12.04 for my laptop screen too. In 12.10, I tried to install all of the NVIDIA drivers available except the nouveau driver. I tried to add a new mode using Xrandr --newmode / --addmode, but it didn't work; it coudn't detect my output. I'd like to know if this is a known bug and if there's something to do with that. Thanks!

  Read the article

• How to grub-install ignore specific drive/partition

  - by gsedej

  Is it possible to use grub-install or update-grub to just search on specific disk/partition? (or ignore specific)? I installed Ubuntu 12.04 on my hard drive, but i wished to do some testing on it without harming current installation, so I "rsynced" root partition (the only) to the USB partition (ext4). I did fix /etc/fstab on USB partition. The problem is that when I do grub-install /dev/sdb (usb) GRUB seems to confuse when UUIDs. Whatever I chose in GRUB it always boot from disk. In grub in edit mode I see that in two "UUID" lines are not the same. If I retype UUID from "first" to second "line" it boots from USB (as I wish). Is there any other way than fixing /boot/grub/grub.cfg each time? EDIT: the GRUB generated good when I booted from USB and grub-install from there, but question is still if it's possible ignore drives

  Read the article

• Opinion : les frameworks Web sont-ils une mauvaise idée ? Partagez-vous l'avis de ce développeur PHP ?

  Opinion : les framework web sont-ils synonymes du mal ? J'ai récemment remarqué que personne n'a pris de recul sur les frameworks dédiés au langage PHP. Ils sont utilisés partout, ils sont devenus critères numéro un dans les recrutements de projets, ils sont l'équivalent d'une mode, etc. Bref, le framework est devenu le crucifix du développeur web. Mais un framework, est-ce vraiment que du bien? Non. En rassemblant une certaine quantité d'information trouvée sur quelques débats à propos de ceux-ci, j'ai décidé d'exprimer mon opinion sur l'utilisation d'un framework. Je trouve qu'un framework peut s'avérer être au sens propre le synonyme du mal. Avons-nous des statistiques sur l'utilisation des framewor...

  Read the article

• Resuming from hibernation shows a fuzzy "static" screen

  - by Ross

  When I resume from hibernation in Ubuntu 10.10 the screen shows static, very similar to what you see on an analogue TV that hasn't been tuned properly. This also occurs on boot from shut down, but only for a moment after the Plymouth boot screen. The static lasts for at least 5 minutes. An odd thing that happens is that the mouse pointer, as a lighter square of static, becomes visible and you can move it around. Attempting to change into a terminal (i.e. Ctrl+Alt+F1) doesn't seem to work (and I'm not sure if that can be done from the login screen). Resuming from suspend has different issues - vertical lines appearing for a second before appearing to be in terminal mode (blinking cursor) and then going to the lock screen. I'm running Ubuntu 10.10 on a Dell Studio 15 with ATI graphics, however I'm not using the proprietary drivers as I had issues with dual-screen support, so it's the generic X.org drivers being used.

  Read the article

• GlassFish 4.0 Virtualization Progress - VirtualBox

  - by alexismp

  Wouldn't it be nice if you could spawn GlassFish instances as VirtualBox virtual machines? Well now with early versions of GlassFish 4.0 you can! This page on the GlassFish Wiki documents the steps to get this to work. It walks you through the various VirtualBox (network and services) and GlassFish configuration steps including the creation of VDI templates (typically JeOS images) to finally create a virtual machine on the fly, as part of the typical GlassFish deployment process. The more general virtualization support in GlassFish is discussed in this other Wiki page. Earlier demonstrations of GlassFish.next prototypes or early milestone builds showed support for KVM, "laptop mode" and OVM as well as community involvement from Serli, speaking of which this slide-deck is a good summary of what we're trying to achieve in the GlassFish 4.0 IMS (IaaS Management Service).

  Read the article

• Problems with NAT Adapater since upgrade to Ubuntu 12.10

  - by jjesse

  I was running Ubuntu 12.04 w/ VirtualBox installed. I was using the NAT interface to connect to everything. Basically running VBOX for testing some things and a Windows VM for Netflix.. Was back to working in my VMs today and noticed that I was unable to connect to the internet. In the VM settings I'm using the NAT adapter, however I noticed there is no NAT adapter in the Network Settings under Preferences in VBOX. Not quite sure what happened but wonder what is going on? I noticed there are some posts about changes DNSMASQ and configuring a bridge mode, but this worked out of the box under 12.04 and since the upgrade this no longers work. Need some help please

  Read the article

< Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >