Search Results

Search found 17130 results on 686 pages for 'computer lab'.

Page 197/686 | < Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >

  • my multi boot can't boot to XP 'resumeobject' is missing

    - by GwenKillerby
    In my multi boot set up, booting to vista and 7 goes fine, but when I try to boot to XP, i get an error Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: 1. Insert your Windows installation disc and restart your computer. 2. Choose your language settings, and then click "Next." 3. Click "Repair your computer." If you do not have this disc, contact your system administrator or computer manufacturer for assistance. File: \NTLDR Status: 0xc000000e Info: The selected entry could not be loaded because the application is missing or corrupt. See below. Clearly the resumeobject seems to be missing in the XP entry ("Real Mode Boot sector"), only I don't know how to restore it. Vista is on **C:**, Win7 is on **F:** (as is the bootmgr ??? ) and WinXP is on **E:** What I've tried: [1] I've used about 5 windows discs, that is the Recovery Consoles from real XP install CD's and 3 virtual Recovery Consoles. All failed. The real CD's work ONE time, but won't let me finish, I only got as far as [b]fixboot E:[/b] Then they shut the laptop down, I kid you not. On a next startup, all 5 CD's ask me for some Admin password that I've never added! [2] I have VisualBCD and EasyBCD, but the most obvious things I tried there didn't solve the problem. So know I don't exactly know what to do with them. [3] I CAN boot into XP with the FIX NTLDR workaround of http://milescomer.com/tinyempire.com/notes/ntldrismissing.htm, but it doesn't fix it permanently QUESTION: How do I fix it permanently? bcdedit /enum output: Windows Boot Manager -------------------- identifier {bootmgr} device partition=F: path \bootmgr description Windows Boot Manager locale en-US default {current} displayorder {current} {812e27a9-27b7-11e4-8fb4-dfa8174ae8dc} {812e27ac-27b7-11e4-8fb4-dfa8174ae8dc} timeout 30 resume No Windows Boot Loader ------------------- identifier {current} device partition=C: path \Windows\system32\winload.exe description Vista locale nl-NL osdevice partition=C: systemroot \Windows resumeobject {73d8b5bc-2764-11e4-b181-806e6f6e6963} Windows Boot Loader ------------------- identifier {812e27a9-27b7-11e4-8fb4-dfa8174ae8dc} device partition=F: path \Windows\system32\winload.exe description Daisy Etta locale en-US osdevice partition=F: systemroot \Windows resumeobject {b8c234a4-27b0-11e4-b8b3-806e6f6e6963} Real-mode Boot Sector --------------------- identifier {812e27ac-27b7-11e4-8fb4-dfa8174ae8dc} device partition=E: path \NTLDR description XP Thank you.

    Read the article

  • SMPS stops when I plug in a SATA drive?

    - by claws
    Hello, Part 1: my first question is all the 4 wire power connectors (intended for hardisks/dvd drives not mother board) are same. Right? I've been using all of them same and I had no problem for years. Yesterday I borrowed a SATA disk from my friend and connected it my computer using Sata Power adaptor (4 wire) and when I switched on the computer. There were fumes coming out of the connector. I immediately turned it off (in just one second). I tested the voltages in the 4 wire power connector of my SMPS: They were 5.3v & 12.2V. I couldn't measure the current. But my SMPTS label reads: DC Output: 3.3v (25A) +5v (32A) -5v (0.3A) +12V (17A) -12V (0.8A) And the SATA hardisk label reads Input: +5v (0.72A) +12V (0.52A) I'm shocked! I never noticed this. Does the "sata power adaptor" scale down the current to required? If it doesn't, I've been connecting same way for years. I never had any problem. This is the first time I'm encountering it. Part 2: I wanted to return the drive to my friend. He has two hard disks, SATA & PATA. Its the SATA that I borrowed. When he usually switches on. The CPU fan starts & then stops for a sec and starts again and continues working. That was the earlier situation. I don't know why it stops & starts? Well, Now when I connect this SATA disk and switch ON the computer. CPU fan starts (just for an instant, not even a 0.5 sec) and stops. It doesn't start again, I mean the power from SMPS has stopped. But if I disconnect this SATA disk. It works fine. What seems to be the problem? I've no idea about why there were fumes or why his SMPS starts & stops giving power? What is its relation with the SATA disk connection?

    Read the article

  • Stress test speed on a gateway?

    - by TheLQ
    I'm interested in stress testing my gateway server but am lost on how. Most of the stress testing applications I've seen only see how much load an app like Apache can handle, but not this. Essentially I want to send as many packets I can into this box with one computer on one card and see how many come out the other in another computer just to get an idea of what kind of load this can handle. I'm also interested how Snort will perform. I'm not really sure how to do this though. What tools could you recommend that could do this?

    Read the article

  • Synergy: server refused client

    - by Tom
    I am trying to get Synergy up and running from a new Windows 7 computer, to an XP computer. The Synergy installations seemed to go fine. I configured each to start on start-up, which they seem to, but the client won't connect. I get repeated: "server refused client with our name" messages in the log output. The Synergy FAQ says to "Add the client to the server's configuration file." But I can't seem to find an instruction set on how to do this. I've looked and looked, but I'm lost...

    Read the article

  • Router stopping my python server

    - by drfrev
    This was originally posted in stackoverflow.com but it was suggested I move it here after it was realized it wasn't my code that was wrong. So my problem, very simply, is that I cannot get my computers that are connected to my router to communicate. example: If I ping a wireless computer I get no responce and the Request times out If I ping a computer wired to the modem directly it works fine. When I ping I use the local ip for each case. *if it helps my original post is here: http://stackoverflow.com/questions/12593024/python-cannot-go-over-internet-network/12593361#12593361 And some screen shots of different things are here: http://imgur.com/a/jUZ4G#3 thank you, any help is greatly appreciated. NOTE I am heading off to bed now, so I will respond around 6:00 AM EST if anyone posts some help

    Read the article

  • allow SSH to bypass VPN on OSX mavericks, openvpn, pf

    - by zycho42
    My home computer connects to the internet through an OpenVPN connection. However, I would like to be able to connect to my home computer from outside over ssh. Ssh is set up and working, but when I connect to the vpn ssh is only accessible from inside my home network. I figure what's going wrong is my router forwards incoming ssh connections to my mac, but then my mac replies over the vpn, so the connection from outside times out. I've got pf set up for a couple of other things, but I can't figure out how to let the ssh replies bypass the vpn using pf. I've come across other solutions that use ip tables, routing tables and rules, but I can't figure out how to set that up on mavericks. I've been searching for this for a while now but I haven't found a working solution. Any help would be greatly appreciated!

    Read the article

  • How to install Web Deployment Agent

    - by Jerry
    I am trying to setup the TFS automated deploys. But I keep getting the following error message when running the deploy. It appears that I have a service called "Web Management Service", but the error message says that I need "We Deploy Agent Service". I tried installing Web Deploy 2.0, but the server said that I already had this installed. What can I do to fix this problem? Error Code: ERROR_DESTINATION_NOT_REACHABLE Could not connect to the destination computer ("myServer"). On the destination computer, make sure that Web Deploy is installed and that the required process ("Web Deployment Agent Service") is started. --Update-- Looks like the Web Deployment agent is not installed by default. I had to re-install MSDeploy, select Change or Custom, then add the Web Deploy Agent service. Now the deploy works correctly.

    Read the article

  • Deleting windows.edb and unchecking Indexing service lead to hard drive file records swapping

    - by linni
    I followed the instructions listed here:http://www.mydigitallife.info/2007/09/18/turn-off-and-disable-search-indexing-service-in-windows-xp/ to free up space on hard drive by deleting the windows.edb indexing file... I also stopped windows search service as mentioned in the comments following the article. In addition to unchecking the "Allow Indexing Service to index this disk for fast file searching" check box on the properties dialog for the C:\ drive, I did the same for two usb connected hard drives (J:\ and I:\ ). I'm not sure why I did that, thought it might shrink the windows.edb file so I wouldn't have to delete it (which sounded a bit risky in my ears at the time). The file of course didn't shrink so I ended up deleting it and freeing up over 3 GB of space, yeehaw. However, as soon as I had done this I could not access the usb connected hard drives anymore. The error I got was "I:\photos is not accessible" "The file or directory is corrupted and unreadable" when I tried to open the photos directory on I:\ Here is where I enter the twilight zone... I try disconnecting I:\ usb hard drive. But XP shows me that instead J:\ drive has disconnected and I:\ is still there. So I disconnect both drives and restart the computer. I then connect one drive, but it lists up the contents of the other drive on root level. I tried connecting the drives vice versa and the same thing happens. I try taking one of the hard drives to another computer and when I connect it there it lists up not its own contents but the contents of the other hard drive and gives the same error as above when I try and access any of the folders (even folders on the root that have the same name as folders on the other drive (e.g. J:\photos and I:\photos)??? And no, this is not a me mixing up my drive letters. Computer Manager - Disk management shows the same result as explorer: The drive size is correct (one is 500GB, the other is 640GB) but the drive name is of the opposite drive, as long as the contents. Also, one drive was full of data and the other almost empty but they incorrectly show their free space status of the other drive. Somehow the usb drives seem to have switched file tables, file records, boot records or something, extremely weird! Even weirder, if I try and create a text file or folder on this drive, it works fine, accessing them, saving, whatever, all good, but accessing any other data on the drive gives me an error. Does anyone have a clue what is going on and more importantly, how I can restore the correct folder listings to access my family photos ??? cheers, linni

    Read the article

  • In Windows 7 Home Premium, is it possible to grant a user account the "log on as a service" right and if so, how?

    - by Ryan Johnson
    The title says it all. I need to have the ability for a local user account to log on as a service on a computer running Windows 7 Home Premium. In Windows 7 Ultimate, this is accomplished by going to Control Panel - Administrative Tools - Local Security Policy and adding the user to the "Log on as a service" policy. In Home Premium, there is no Local Security Policy in the Control Panel. Is there another way to add the use to that policy (i.e. registry setting) or is my only recourse to upgrade the computer to Windows 7 Professional? Thanks in Advance, Ryan

    Read the article

  • How to stop S.M.A.R.T check running for external hard drive

    - by gotqn
    I am using Windows 7 and I have enabled my "S.M.A.R.T" check, too. I have bought an external 1 TB USB hard drive. When it is connected with my computer, it delays my machine initial start with about 4-5 minutes. I was very confused at the begging, then disable the "S.M.A.R.T" check and see that the computer runs normally after restart. So, here is what I want to know: Why the check is turn for the external disk? Is there a way to use the "S.M.A.R.T" check only for my main hard drive? Why it takes 4 to 5 minutes more, as my both hard drives - internal/external are 1 TB?

    Read the article

  • RDP and New Accounts

    - by leeand00
    I created a new user account on the domain and added them to the Remote Desktop Users group. I could login just fine locally, but when I logged in remotely I was basically told that I could not login from there using that user. I could login just fine as the administrator or anybody else other than that new account. So I researched it a bit more and found that my setting looked like this on the local machine: So I changed it to Allow connections only from computers running Remote Desktop with Network Level Authentication (NLA). Now when I tried this down at my office I connected with RDP just fine on another computer. But low and behold when I got home and simply try to connect to the machine, I get the message: There has to be some kind of in between setting, or additional setting that I need to change on the user that allows me to connect directly via remote desktop over the VPN. At the moment I can connect by connecting to another computer on the network and then RDPing from there into my machine, but this is not ideal.

    Read the article

  • External microphone not working

    - by haireefairee
    gnome-volume-control does not recognise external hardware. My headphones work nonetheless, but an external microphone does not. External microphones used to work, but at times were temperamental - I would have to login or logout with or without microphone plugged in. I am running Ubuntu 10.04 LTS (Lucid Lynx) on an mSi U100 wind notebook with one Intel soundcard and trying to use a jack microphone which has worked previously. USB microphones have also been problematic. I have done the basics: Installed upgrades. Checked nothing is muted. Looked for the device on gnome-volume-control. Tried using a different microphone that works on a friends computer. Tested my microphone works when using a different computer. Checked my soundcard can be seen (cat /proc/asound/cards). I have done more complicated things: I have tried playing around with settings in alsamixer. Nothing is muted. I can adjust "mic" and "internal mic" regardless of whether an external microphone is plugged in. I have the choice of input source from "mic", "front mic", "line" and "CD". I've played around changing this and it hasn't helped. I only have one CAPTURE option. In gnome-sound-recorder I have the choice of line, microphone 1 and microphone 2. I have played around changing this option. None of these pick up sound from the external microphone. Microphone 2 is the microphone on my laptop which is bad quality. In gnome-sound-recorder I have the choice of different profiles, and changing this has not helped either. I have looked at gstreamer-properties but none of that seemed helpful. I don't know if there a way to check if these external devices are being picked up. I would like to make an external microphone work. Please help!

    Read the article

  • Tunneling traffic through two VPN hops/tunnels.

    - by Roberto Sebestyen
    I am a web developer, and I find myself often working from home. But when I do, I am forced to Remote Desktop to the Office desktop computer and work from there. The reason is because the application I am working on needs to connect to servers at a Data Center via a VPN from the Office Desktop. HomeDesktop (Win7) --- PVN --- OfficeDesktop(WinXP) --- VPN --- Data Center What I would really like to do is, I would like to find a way to be using my Home desktop developing on that, and whenever my computer tries to access servers on the Data Center, I would like to tunnel that traffic through the two VPN tunnels separating me and the Data Center. I have admin privileges on both Office Desktop and Home Desktop, but I do not have any admin privileges in the Data Center. So what kind of tunneling solution could I use here? Is it even possible?

    Read the article

  • Can't access a local site site on LAN

    - by Dilawar
    I have lighttpd setup on a machine (say ip is 10.107.105.13) with following details. inet addr : 10.107.105.13 Bcast : 10.107.111.255 Mask : 255.255.240.0 I can access my site on this computer by using firefox http://localhost/index.html. Now I am trying to access this site from another computer with following details inet addr : 10.14.42.7 Bcast : 10.14.42.255 Mask : 255.255.255.0 But it says 'access denied'. nmap 10.107.105.13 gives the following output. PORT STATE SERVICE 22/tcp open ssh 80/tcp open http 1234/tcp open hotline 3306/tcp open mysql 9418/tcp open git Following is the output of iptables -L -n -v on 10.107.105.13 141 11207 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 FORWARD and OUTPUT section empty. What is wrong with all this?

    Read the article

  • Windows 8 Pro Remote Desktop issue

    - by Mike C.
    I have a weird issue here. I'm running Windows 8 Pro. The client computer is also running Windows 8 Pro. Remote Desktop works when I'm in the same network. I tried connecting using my external IP Address and my DynDNS account, neither works. I disabled Windows Firewall and setup DMZ for my computer on the router, still can't get remote desktop to work. I verified www.canyouseeme.org, port 3389 is open, which is obvious since I'm running DMZ! My ISP, Bell Canada (modem/router: Sagemcom F@st 2864), blocks port 80 and 25, but I don't need those for RDP, do I? The funny thing is RDP rejects the connection instantaneously for my IP or DynDNS while it takes a while for another address. Thank you, Michael

    Read the article

  • GPO refresh error - Policy Refresh has not completed in the expected time. Exiting...

    - by Albert Widjaja
    Hi All, I'm having problem with my GPO changes, that I'd like to force to my terminal server users here's what I've done: I've made some necessary changes in one of the Domain Controllers to disable the GPO which applies to my Terminal Server user OU and then I go to the Terminal Server mstsc /admin console to perform the GPo refresh by using /force parameter, however I got this error instead: C:\Documents and Settings\Adminisratorgpupdate /force Refreshing Policy... User Policy Refresh has not completed in the expected time. Exiting... User Policy Refresh has completed. Computer Policy Refresh has not completed in the expected time. Exiting... Computer Policy Refresh has completed. but then the changes still got no effect yet as I logged in to the terminal server ? is there any way of how to make it in effect immediately please ? Thanks

    Read the article

  • "the user profile service failed the logon"

    - by crazybmanp
    "the user profile service failed the logon" i had gotten this error when trying to login last night. i looked it up online and found that this was caused by an error (that is still unfound, apparently) that is causing windows to mark profiles as backup, and that the best way to fix this error is to do a system restore from the repair your computer special boot option. what i would like to know is if there someone happens to know the cause of this error, as i would not like it to happen again. Computer specifications OS: Windows 7 hard-disk check completely clean "repair startup" scan and fix: clean, no problems virus scans with kaspersky: clean (while not the usual information for specifications, i felt this info was more important for this case, any other information can be asked for.

    Read the article

  • GRUB2 prompt instead of BURG boot screen after mistake during BURG installation

    - by Tomas Lycken
    I just installed BURG, but during the installation I made a mistake: after the package was installed, I got to some command-line based GUI for configuration, where I forgot to mark my (only) hard disk as the boot device before I hit OK. I tried to reinstall (apt-get purge burg && apt-get autoremove followed by apt-get install burg) but I wasn't able to get to the same screen again (I didn't find the GUI). When I now start my computer, I am taken to a GRUB2 prompt and no BURG (or GRUB2) boot menu is shown. Since I don't know any GRUB commands and I am helpless. How do I reinstall GRUB/BURG correctly? Update: I rebooted my computer, and got a BURG prompt (which appears to be the same thing as a GRUB prompt, but if there's a difference I wouldn't know it...). I have booted from a Live USB, but I don't know what to do next. The text above has been updated to reflect this new situation - for the original text, please see the previous versions of this post. (No answers were posted when this was edited...)

    Read the article

  • how to i lock a Harddrive to a certain drive letter

    - by Memor-X
    i have an external hard drive that i have set to Drive F which on it contains some programs that i have shortcuts on the desktop how i have a second external hard drive which i store my music on which is auto assigned to Drive E, due to someone thinking that Australians love to have f** wings on power plugs for hard drives while power boards have each socket close together i can have both of these hard drives set at the same time my music hard drive i normally only plug up when i sync music to my ipod but on occasion when i unplug my music hard drive and plug my old one back in or at times when i turn on my computer with the music hard drive in, turn off my computer and turn it back on with my old hard drive it's drive letter gets switched to E i get annoyed having to always go into disk management and change the drive letter back to F when this happens so i am wondering if I can lock my hard drive to always be F, if anything else tries to be F it can fail for all i care If there is a batch file i can use that'll go though all the steps of Disk Management to change a drive's letter, that way i can set it up in the startup folder

    Read the article

  • Restore Default OSX Home Folder Icons

    - by Cerales
    I want to keep folders such as Pictures and Documents in my home folder in sync between computers; at the moment, I'm using Dropbox to do this. On Computer A I added a symlink to the folders in my home directory to the Dropbox folder. On Computer B I deleted the existing Pictures and Documents folders and replaced them with symlinks to the folders in the Dropbox folder. This works very well, except that in Finder I don't see the nice little icons that Lion has by default for folders of a particular kind. Is there any way to restore these?

    Read the article

  • What are Web runtime environments and programming languages

    - by Bradly Spicer
    I've been looking into the details behind these two different categories: Web runtime environments Web application programming languages I believe I have the correct information and have phrased it correctly but I am unsure. I have been searching for a while but only find snippets of information or what I can see as useless information (I could be wrong). Here are my descriptions so far: Web runtime environments - A Run-time environment implements part of the core behaviour of any computer language and allows it to be modified via an API or embedded domain-specific language. A web runtime environment is similar except it uses web based languages such as Java-script which utilises the core behaviour a computer language. Another example of a Run-time environment web language is JsLibs which is a standable JavaScript development runtime environment for using JavaScript as a general all round scripting language. JavaScript is often used to create responsive interfaces which improve the user experience and provide dynamic functionality without having to wait for the server to react and direct to another page. Web application programming languages - A web application program language is something that mimics a traditional desktop application within a web page. For example, using PHP you can create forms and tables which use a database similar to that of Microsoft Excel. Some of the other languages for web application programming are: Ajax Perl Ruby Here are some of the resources used: http://en.wikipedia.org/wiki/Web_application_development http://code.google.com/p/jslibs/ I would like some confirmation that the descriptions I have created are correct as I am still slightly unsure as to whether I have hit the nail on the head.

    Read the article

  • Web browser being selective about the sites that it will visit.

    - by Andrew Doran
    I've been trying to help my father-in-law with this problem but haven't been able to get anywhere. Since the weekend the web browsers on his computer (Chrome and Internet Explorer on Windows XP) will only let him get to certain sites - for example, he is able to conduct his online banking but he cannot visit www.bbc.co.uk, www.amazon.co.uk or www.ancestry.com. There is another computer in the house that goes via the same router and this can connect to both, which suggests it is his machine. I tried running a tracert to www.bbc.co.uk and managed to get through, but the web browser hangs with a message that it is waiting for a response. I tried using the WinSockFix tool in case it was anything to do with a recent registry change but that didn't work either. He can't think of anything that he recently did on his machine to cause the problem. Can anyone help?

    Read the article

  • How to boot windows 8 in a dual boot along with windows 7?

    - by GoldDove
    I have installed a WIndows 8 evaluation about a week ago. Usually, it asks me every time I turn on my computer whether to boot into windows 8 or windows 7. The default was windows 8 after 30 seconds. I changed that just yesterday to be default windows 7 after 5 seconds. And after I changed the setting, I went ahead and went into windows 8 and did my work. Today, when I turned on my computer, it is failing to ask me which one to boot it in. It simply boots directly into Windows 7. Is there any reason for this? Can I no longer boot into Windows 8?

    Read the article

  • Windows 7 license - move from 32bit to 64bit with OEM key with Lenovo

    - by MrChrister
    http://superuser.com/questions/73327/can-i-use-a-windows-7-professional-32-bit-oem-licence-to-install-the-64-bit-versi This questions asks it generically, but does anybody know specifically about Lenovo outlet computers? I want to buy an outlet computer with Windows 7 Home Premium 32, but I would rather have Windows Home Premium 64. Can I use the license I am getting with the outlet laptop to do a clean install of the 64bit version. I know I can't upgrade, I want to do this first thing out of the box when I get the computer. It seems like it is possible, according to the answer.microsoft.com the key will work for 64bit or 32bit.

    Read the article

  • Bitlocker-to-go on fixed drive

    - by Unsigned
    Scenario Two drives are connected to a computer. One via a SATA-to-USB interface, the other directly via a SATA-to-eSATA cable. The drive on USB appears as a removable drive, the drive on eSATA appears as a fixed drive. Both use NTFS. The USB drive offers Bitlocker-To-Go, the eSATA drive only offers BitLocker. Question It is my understanding that drives encrypted with BitLocker-To-Go include an app to allow Windows XP read-only access to the volume. Is this the only difference, and is there a way to use Bitlocker-To-Go on the eSATA drive? Update Another difference is found here: The recovery key is required when a BitLocker-protected fixed data drive configured for automatic unlocking is moved to another computer.[1] Assuming that does not apply to removable drives.

    Read the article

< Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >