Search Results

Search found 11531 results on 462 pages for 'cpu cache'.

Page 197/462 | < Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >

• How do I resolve BSOD: PAGE_FAULT_IN_NONPAGED_AREA?

  - by Burnzy

  I have been trouble shooting this for a few days and cannot fix this anyhow. Computer specifications Mobo: ASUS Sabertooth X58 LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard CPU: Intel(R) Core(TM) i7 CPU 920 (Bloomfield) @ 2.67 ( no OC ) RAM: 6144MB RAM GPU: 2x NVIDIA GeForce GTS 250 1Go in SLI (sli is not enabled anyway at the moment anyway) Drives: OCZ RevoDrive OCZSSDPX-1RVD0120 PCI-E x4 120GB PCI Express MLC Internal SSD [RAID-0]. (I know this could potentilly cause trouble but I had the BSOD before using this drive) Seagate Barracuda 7200.11 ST31500341AS 1.5TB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive - Bare Drive Click here for a log of a crash I just had. Click here for a log of a crash I had 30 minutes later, note that it's another driver. Some info Occurence: It seems pretty random so far, haven't noticed any kind of pattern I tried: Windows memory diagnostic (went smoothly at 1066mhz) As I said, it was still happening on my HDD, so when I bought the revodrive I install a new OS on there and still got the error, I believed it happened and I had no drivers installed at that point (not 100% sure) Change the following registry value to 1 (true): HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SessionManager \MemoryManagement\ClearPageFileAtShutdown Tried to lower even more ram clock Made sure ram timing was set to recommended by manufacturer Verified if motherboard was in good physical condition (yes and its brand new) There is one thing to note, when I got the new motherboard, I installed the new drivers WITHOUT formatting and the I removed the motherboard drivers that I could remove from the control panel (pretty much the first things that have been installed). Could this cause an issue even ON THE OTHER drive (revodrive). Hopefully someone can help me, I am getting tired of this, spending so much money and cannot get this to work correctly. If you need any other information let me know, thank you!

  Read the article

• Idle state detection for server

  - by odinmillion

  Windows OS has a service that detects idle state. Details: Task Idle Conditions The computer is considered idle if all the processors and all the disks were idle for more than 90% of the past 15 minutes and if there is no keyboard or mouse input during this period of time. When the Task Scheduler service detects that the computer is idle, the service only waits for user input to mark the end of the idle state. It is very useful for usual PCs that have keyboard amd mouse. We can use standard task scheduler to start some process like defrag when PC in idle state and stop when PC isn't in idle state. But what should we use when we using a standalone server without keyboard and mouse? Server sometimes receives commands by TCP/IP and starts CPU and HDD activity. But sometimes CPU and HDD activity at zero level. I would like to use this periods of time to start defrag or another process. But this started at "idle" state processes should be terminated when another commands will appear. So, standard idle state conditions cant help me because we have not got user input to stop idle state. I need more customizable idle state detector. Automatically started processes shouldn't influence to idle state, but PC should go away from idle state when another process will apperar. What should I use? Maybe exists some advansed task scheduler? Or I should write some useful utility on C#? I hope that it is a standard task and all useful utilities already compiled :)

  Read the article

• Using smartctl to get vendor specific Attributes from ssd drive behind a SmartArray P410 controller

  - by Lairsdragon

  Recently I have deployed some HP server with SSD's behind a SmartArray P410 controller. While not official supported from HP the server work well sofar. Now I like to get wear level info's, error statistics etc from the drive. While the SA P410 supports a passthru of the SMART Command to a single drive in the array the output I was not able to the the interesting things from the drive. In this case especially the value the Wear level indicator is from interest for me (Attr.ID 233), but this is ony present if the drive is directly attanched to a SATA Controller. smartctl on directly connected ssd: # smartctl -A /dev/sda smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 5 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 3 Spin_Up_Time 0x0000 100 000 000 Old_age Offline In_the_past 0 4 Start_Stop_Count 0x0000 100 000 000 Old_age Offline In_the_past 0 5 Reallocated_Sector_Ct 0x0002 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0002 100 100 000 Old_age Always - 8561 12 Power_Cycle_Count 0x0002 100 100 000 Old_age Always - 55 192 Power-Off_Retract_Count 0x0002 100 100 000 Old_age Always - 29 232 Unknown_Attribute 0x0003 100 100 010 Pre-fail Always - 0 233 Unknown_Attribute 0x0002 088 088 000 Old_age Always - 0 225 Load_Cycle_Count 0x0000 198 198 000 Old_age Offline - 508509 226 Load-in_Time 0x0002 255 000 000 Old_age Always In_the_past 0 227 Torq-amp_Count 0x0002 000 000 000 Old_age Always FAILING_NOW 0 228 Power-off_Retract_Count 0x0002 000 000 000 Old_age Always FAILING_NOW 0 smartctl on P410 connected ssd: # ./smartctl -A -d cciss,0 /dev/cciss/c1d0 smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net (Right, it is complety empty) smartctl on P410 connected hdd: # ./smartctl -A -d cciss,0 /dev/cciss/c0d0 smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net Current Drive Temperature: 27 C Drive Trip Temperature: 68 C Vendor (Seagate) cache information Blocks sent to initiator = 1871654030 Blocks received from initiator = 1360012929 Blocks read from cache and sent to initiator = 2178203797 Number of read and write commands whose size <= segment size = 46052239 Number of read and write commands whose size > segment size = 0 Vendor (Seagate/Hitachi) factory information number of hours powered up = 3363.25 number of minutes until next internal SMART test = 12 Do I hunt here a bug, or is this a limitation of the p410 SMART cmd Passthru?

  Read the article

• Flash alternative for iBook Mac?

  - by Hunter Dolan

  I have a old Apple iBook G4 that I decided to hook up to my main TV. I like the setup because I can surf the internet on my TV now. The only thing that I can't seem to do is watch Flash videos. Apparently Flash Player 10 doesn't play nice with the iBook's graphics card's GPU, leaving all the graphics processing to the CPU which is a disaster. Others suggested downgrading to Flash Player 9, I did that, and youtube worked fine, but Hulu (The main reason I wanted to hook it up to the TV in the first place) did not. Anyone know of a Flash alternative or a Flash 10 fix for the iBook? Or even a Hulu client that doesn't require Flash. Here are my iBook's Specs Model Name: iBook G4 <br> Model Identifier: PowerBook6,5 <br> Processor Name: PowerPC G4 (1.2) <br> Processor Speed: 1.2 GHz <br> Number Of CPUs: 1 <br> L2 Cache (per CPU): 512 KB <br> Memory: 512 MB <br> Bus Speed: 133 MHz <br> Boot ROM Version: 4.8.7f1 <br> Mac OS X Version: 10.5.8 <br> PS: Don't tell me that I need to buy a new computer. I know that I would have better results with a new computer but I don't want to buy a new computer just for Hulu.

  Read the article

• Amazon EC2 Reserved Instances: "Heavy Utilization" clarification

  - by gravyface

  Should be another easy one here, but I need clarification on what they define as "heavy utilization" for Reserved Instance types. From their Website: Heavy Utilization RIs – Heavy Utilization RIs offer the most absolute savings of any Reserved Instance type. They’re most appropriate for steady-state workloads where you’re willing to commit to always running these instances in exchange for our lowest hourly usage fee. With this RI, you pay a little higher upfront payment than Medium Utilization RIs, a significantly lower hourly usage fee, and you’re charged that lower hourly rate for every hour in the Reserved Instance term you purchase. Using Heavy Utilization RIs, you can save up to 41% for a 1-year term and 58% for a 3-year term vs. running On-Demand Instances. If you’re trying to find a break-even utilization, you’re economically advantaged using Heavy Utilization RIs (vs. On-Demand Instances) if you plan to use your instance more than 43% of a 1-year term or 79% of a 3-year term. I'm assuming that, if I'm planning on running a 24/7 Web Server, then regardless of how many resources I consume (bandwidth, cpu cycles, memory), I would want to go with a Heavy Utilization Reserved Instance? This one Web Server in particular will likely barely budge the cpu, but it needs to be up and running 24/7. Not 100% on what they're defining as "heavy".

  Read the article

• Is 30 calls / second a lot for one IIS server?

  - by Lieven Cardoen

  We have a RIA application that 300 clients concurrently use in an intranet environment. Together they make 30 calls / second to IIS (asp.net) (actually it's 60 but calls are loadbalanced over two IIS servers). Half of the calls is getting an asset (Caching Profile is used so most of the time cache is hit), the other half is saving data to a sql server. Retrieving an asset is done with a aspx page. Saving the data happens via WebORB, asp.net and Sql Server. So some processing is needed by WebORB (amf decoding, GZIP, ...). We also use Spring.NET, and some of the container objects have a request scope (not a lot). IIS servers -- Virtual machines, 4 CPU, 2 gb RAM. They are based on Windows 2008 x64 SP2 Enterprise Edition. Sql Server 2008 is used. Apparently CPU of both IIS serers is constantly around 60-70%. Now, my question, is the load of 60-70% acceptable and how could we possible bring that down to less % (maybe using only one IIS server)? + Is 2 gb RAM enough? Assets can be up to 20mb, but on average, they are about 30kb. (the load of 60-70% is achieved with assets around 30kb). The data that gets saved with weborb is very small (2kb) and is just one object.

  Read the article

• I get a Segmentation fault when doing apt-get util-linux

  - by Adam

  I've found that a lot of upgrade commands and Apache on my system are failing with Segmentation faults. I don't know if this is the main one, but a lot of packages depend on util-linux: root@myUbuntuHardyHeronServer:~# apt-get install util-linux Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be upgraded: util-linux 1 upgraded, 0 newly installed, 0 to remove and 72 not upgraded. 20 not fully installed or removed. Need to get 0B/441kB of archives. After this operation, 0B of additional disk space will be used. (Reading database ... 20547 files and directories currently installed.) Preparing to replace util-linux 2.13.1-5ubuntu2 (using .../util-linux_2.13.1-5ub untu3.1_i386.deb) ... Unpacking replacement util-linux ... Segmentation fault dpkg: warning - old post-removal script returned error exit status 139 dpkg - trying script from the new package instead ... Segmentation fault dpkg: error processing /var/cache/apt/archives/util-linux_2.13.1-5ubuntu3.1_i386 .deb (--unpack): subprocess new post-removal script returned error exit status 139 Segmentation fault dpkg: error while cleaning up: subprocess post-removal script returned error exit status 139 Errors were encountered while processing: /var/cache/apt/archives/util-linux_2.13.1-5ubuntu3.1_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• Dell Inspiron 1564 overheating but fan not switching on, how to diagnose?

  - by Smugrik

  I've got a Dell Inspiron 1564 laptop that is about one and a half years old. Since about a week, the laptop started to overheat, causing it to switch off unexpectedly... The cpu fan is working erratically, it can start to spin for a while, doing its job and cooling down the cpu before it stops, but then the temperature goes up, and the fan doesn't reacts, once the temperature reaches a critical point (over 85 celsius, checked with speedfan...), the laptop switches off... I already cleaned the vents and fan from dust, to no avail, and it was actually quite clean anyway. Drivers and bios are up-to-date, no crapware was ever installed on this machine. I don't know how to diagnose the problem, could it be the temperature sensors that sends wrong information, so the fan doesn't reacts? but then I believe the computer wouldn't detect the overheat and stop... Is there a way I can pin point the problem? Maybe some low-level diagnostic tools to check functionality of sensors and fans??? The warranty is already over so any suggestion would be welcome. Thanks!!

  Read the article

• Poor Write Performance in VM inside Proxmox PVE 2.0

  - by sorsenne

  I am running a PVE 2.0 on a decent Hardware (2 SATA HDDs as RAID1, 12GB RAM, i7 CPU) but the I/O Performance is very poor inside the VM (Ubuntu 11.10 Server). The very same VM was copied to another Server running simply Ubuntu Server with KVM and had better I/O Perf. this is how the HDD is shown in the Guest: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata1.00: ATA-8: ST3000DM001-9YN166, CC49, max UDMA/133 ata1.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST3000DM001-9YN1 CC49 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) sd 0:0:0:0: [sda] 4096-byte physical blocks sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA I tested with DD: $ dd bs=1M count=128 if=/dev/zero of=test conv=fdatasync 128+0 records in 128+0 records out 134217728 bytes (134 MB) copied, 19.2222 s, 7.0 MB/s on the Host, this same Test will result with 156 MB/s in average. PS: I am using VirtIO and see no error in dmesg.

  Read the article

• Apache 403 after configuring varnish

  - by w0rldart

  I just don't know where else to look and what else to do. I keep getting a 403 error on all my vhosts after setting varnish 3.0 Apacher log: [error] [client 127.0.0.1] client denied by server configuration: /etc/apache2/htdocs Headers: http://domain.com/ GET / HTTP/1.1 Host: domain.com User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:16.0) Gecko/20100101 Firefox/16.0 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-US,en;q=0.5 Accept-Encoding: gzip, deflate DNT: 1 Connection: keep-alive Cookie: __utma=106762181.277908140.1348005089.1354040972.1354058508.6; __utmz=106762181.1348005089.1.1.utmcsr=OTHERDOMAIN.com|utmccn=(referral)|utmcmd=referral|utmcct=/galerias/cocinas Cache-Control: max-age=0 HTTP/1.1 403 Forbidden Vary: Accept-Encoding Content-Encoding: gzip Content-Type: text/html; charset=iso-8859-1 X-Cacheable: YES Content-Length: 223 Accept-Ranges: bytes Date: Sat, 01 Dec 2012 20:35:14 GMT X-Varnish: 1030961813 1030961811 Age: 26 Via: 1.1 varnish Connection: keep-alive X-Cache: HIT ---------------------------------------------------------- /etc/default/varnish: DAEMON_OPTS="-a ip.ip.ip.ip:80 \ -T localhost:6082 \ -f /etc/varnish/main.domain.vcl \ -S /etc/varnish/secret \ -s file,/var/lib/varnish/$INSTANCE/varnish_storage.bin,1G" #-s malloc,256m" My vcl file: http://pastebin.com/axJ57kD8 So, any ideas what I could be missing? Update Just so you know, ports: NameVirtualHost *:8000 Listen 8000 and <VirtualHost 205.13.12.12:8000>

  Read the article

• How do I troubleshoot a slow hard drive?

  - by Bruce Connor

  My computer is suffering of slow-downs and I'm not surprised (it's around 6 years old). Here's what I've verified: They are not very frequent (only a couple of times a day). When they happen a single application will hang for 10-60 seconds, while the rest don't hang but also get slow. Even as it is happening, the CPU usage stays low. It happens to applications (such as text editor, firefox, skype). It never happens to some applications (such as games) which I use for hours under heavy CPU load. Also of note: The Graphics card and PSU are new (around a year). Though I have a decent amount of software installed right now, this was happening even right after I reinstalled Windows. This HDD has been through many partinioning schemes, and a few heavy operations (such as moving around 200GB of data). Because of the above, I am already 70% sure the problem is with the hard drive. Before I replace it, however, I want to rule out other less likely possibilities (such as RAM, software, or PSU). I don't have the money to replace the entire box right now, but I can easily replace one of the components. I've read several questions (such as this one) which give general guidance on troubleshooting an unknown issue, that is not what I'm looking for here. My main question is: What tests or benchmarks can I run to verify I have a problematic hard drive? I don't need to solve this problem, I am content with just making sure it's the hard drive. I could borrow a newer hard drive from a friend and see if it gets better. A positive result would rule out all other components, but it wouldn't rule out a software issue (since this new hard drive won't have any of the software I use daily). Running on Windows/Linux.

  Read the article

• Different nginx rules based on referrer

  - by juana

  I'm using WordPress with WP Super Cache. I want visitors who come from Google (That inlcudes all country specific referrers like google.co.in, google.co.uk and etc.) to see uncached contents. There are my nginx rules which are not working the way I want: server { server_name website.com; location / { root /var/www/html/website.com; index index.php; if ($http_referer ~* (www.google.com|www.google.co) ) { rewrite . /index.php break; } if (-f $request_filename) { break; } set $supercache_file ''; set $supercache_uri $request_uri; if ($request_method = POST) { set $supercache_uri ''; } if ($query_string) { set $supercache_uri ''; } if ($http_cookie ~* "comment_author_|wordpress|wp-postpass_" ) { set $supercache_uri ''; } if ($supercache_uri ~ ^(.+)$) { set $supercache_file /wp-content/cache/supercache/$http_host/$1index.html; } if (-f $document_root$supercache_file) { rewrite ^(.*)$ $supercache_file break; } if (!-e $request_filename) { rewrite . /index.php last; } } location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /var/www/html/website.com$fastcgi_script_name; include fastcgi_params; } } What should I do to achieve my goal?

  Read the article

• Pentium 4 Willamette vs. Faster Celeron Northwood [closed]

  - by Synetech inc.

  Which is the preferable of the following two processors? Intel® Pentium® 4 Processor 1.70 GHz, 256K Cache, 400 MHz FSB Willamette Intel® Celeron® Processor 2.40 GHz, 128K Cache, 400 MHz FSB Northwood Details: A few months ago my motherboard died, so I bought a used computer that had a 2.4GHz Celeron. My old system had a 1.7GHz Pentium 4, so now I’m trying to decide which CPU to use. Obviously a P4 is preferable over a Celeron, but the Celeron is (significantly?) faster than the P4. I’m wondering if the faster Celeron might be better for certain tasks (ie, stronger but dumber is better at some things than smarter but weaker). I tried Googling for some reviews and comparisons for graphs to get a clear depiction of which is better overall, but found nothing that helped. (I did manage to find one page that indicates (apparently by poll, not benchmark) that the Celeron is better.) So which CPU should I use? Does anyone know of some graphs that I can use to compare the two? The system is a general-purpose machine for word-processing, Internet, and casual games (not Crysis, but not Solitaire either). It will be running Windows XP. The board is a 478 with 400MHz FSB.

  Read the article

• How small (spec wise) can a virtual machine be and still boot up and run some sort of OS?

  - by IllvilJa

  One of the advantages with virtual machines is that you can be very flexible with their sizes. If the host system permits it, you can have a very large virtual machine with a lot of virtual RAM and disk. Also, you can decide to go the other way around, to give the virtual machine a very modest amount of RAM and disk and then choose and configure the OS appropriately. The question is, how small virtual machines have people managed to setup (and get to both boot up and to run)? Virtual machines doing something usuful is preferable, even if I know "useful" in this context is awfully subjective, but laboratory-cases with a configuration stripped beyond common sense could be intresting as well, just to see what people manage to boot and run. Quite open ended question and quite academic, but think of it: an extremely small VM (which still does something useful) takes very little memory and disk and can be quite quickly saved to and restored from disk. If it's also gentle on CPU resources, one might consider having a huge number of such VMs up and running on a host. (Imagine a VM running just an old Commodore 64 or Commodore Amiga in it. Ok, way wrong CPU architecture for modern Virtualization software running on a x86-based PC but still an interesting thought. You could have quite a few such small VMs running on a modern PC.)

  Read the article

• 1GB cached memory - Do I need more RAM?

  - by Martin

  The server runs well but I wonder if I should get more RAM. I only have a few MB of "free" memory and 1.2GB of "cached" memory: free: total used free shared buffers cached Mem: 3945 3893 51 0 28 1216 -/+ buffers/cache: 2648 1296 Swap: 3895 857 3038 I learned that cached memory is used while it's free and not. Is the cached value an indicator for the need of more RAM? cat /proc/meminfo 1 day after flushing the cache: MemTotal: 4040048 kB MemFree: 32844 kB Buffers: 18956 kB Cached: 1249092 kB SwapCached: 161576 kB Active: 3611328 kB Inactive: 189104 kB SwapTotal: 3989496 kB SwapFree: 2894200 kB Dirty: 20520 kB Writeback: 0 kB AnonPages: 2523496 kB Mapped: 217744 kB Slab: 70940 kB SReclaimable: 36756 kB SUnreclaim: 34184 kB PageTables: 99648 kB NFS_Unstable: 0 kB Bounce: 0 kB CommitLimit: 6009520 kB Committed_AS: 6401716 kB VmallocTotal: 34359738367 kB VmallocUsed: 18852 kB VmallocChunk: 34359719439 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB top: top - 17:20:10 up 112 days, 3:06, 1 user, load average: 1.01, 1.62, 1.48 Tasks: 208 total, 1 running, 207 sleeping, 0 stopped, 0 zombie Cpu(s): 0.6%us, 0.6%sy, 0.0%ni, 97.5%id, 1.3%wa, 0.0%hi, 0.1%si, 0.0%st Mem: 4040048k total, 3953108k used, 86940k free, 16348k buffers Swap: 3989496k total, 1095712k used, 2893784k free, 1235436k cached

  Read the article

• Getting the most out of a Mac mini as a media center

  - by celebritarian

  Hello! I own an old Mac mini from 2006 (maybe early 2007). It's got an Intel Core Solo 32-bits CPU and 512 MB RAM. 160 GB HDD. The GPU is an integrated chip… Currently, my Mini is sitting under my LCD TV (720p). It's plugged in via a DVI to HDMI cable. It's currently running Leopard. And unfortunately, Snow Leopard can't be installed on a device with less than 1 GB of RAM… So, my Mac mini isn't exactly powerful. Also, it's slow and Mac OS X is not a pleasant experience on my Mini right now. It feels slow and heavy. I want to use my Mac mini as a media center/player. I want to be able to play video files in 720p (H.264, Matroska/MOV files). So basically, playing high-def videos is all I want to do with my Mini. What OS should I install? Stick to OS X? Optimize for video playback? Or should I install another OS — like Win XP, Ubuntu or any other Linux dist? Then, will my Mini be able to play 720p videos smoothly, even though the CPU and GPU aren't that powerful and with the limit of 512 MB of RAM? Appreciate all help. Thanks in advance!

  Read the article

• Upgrade Debian to unstable on VirtualBox: udev problem

  - by Ken

  I'm running Debian stable on VirtualBox on Windows Vista 64-bit Ultimate. It's been running great, but I needed some newer packages, so I put sid in my sources.list to upgrade to unstable (as I've done a dozen times on various Linux boxes over the years). When I upgraded, something went screwy and it asked me to run apt-get -f install to fix them, which gave this: (Reading database ... 77846 files and directories currently installed.) Preparing to replace udev 0.125-7+lenny3 (using .../archives/udev_151-3_amd64.deb) ... Since release 150, udev requires that support for the CONFIG_SYSFS_DEPRECATED feature is disabled in the running kernel. Please upgrade your kernel before or while upgrading udev. AT YOUR OWN RISK, you can force the installation of this version of udev WHICH DOES NOT WORK WITH YOUR RUNNING KERNEL AND WILL BREAK YOUR SYSTEM AT THE NEXT REBOOT by creating the /etc/udev/kernel-upgrade file. There is always a safer way to upgrade, do not try this unless you understand what you are doing! dpkg: error processing /var/cache/apt/archives/udev_151-3_amd64.deb (--unpack): subprocess new pre-installation script returned error exit status 1 insserv: warning: current start runlevel(s) (2 3 4 5) of script `vboxadd-x11' overwrites defaults (empty). insserv: warning: current stop runlevel(s) (0 1 6) of script `vboxadd-x11' overwrites defaults (empty). insserv: warning: current start runlevel(s) (2 3 4 5) of script `vboxadd-x11' overwrites defaults (empty). insserv: warning: current stop runlevel(s) (0 1 6) of script `vboxadd-x11' overwrites defaults (empty). Errors were encountered while processing: /var/cache/apt/archives/udev_151-3_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) I have the VirtualBox extensions installed, and it looks like the udev install doesn't know what to make of them. But I don't know exactly where/how they're installed (I just ran the VBoxLinuxAdditions-amd64.run script, basically), so I don't know how to disable them. Any ideas? Thanks!

  Read the article

• Nginx + uWSGI + Django performance stuck on 100rq/s

  - by dancio

  I have configured Nginx with uWSGI and Django on CentOS 6 x64 (3.06GHz i3 540, 4GB), which should easily handle 2500 rq/s but when I run ab test ( ab -n 1000 -c 100 ) performance stops at 92 - 100 rq/s. Nginx: user nginx; worker_processes 2; events { worker_connections 2048; use epoll; } uWSGI: Emperor /usr/sbin/uwsgi --master --no-orphans --pythonpath /var/python --emperor /var/python/*/uwsgi.ini [uwsgi] socket = 127.0.0.2:3031 master = true processes = 5 env = DJANGO_SETTINGS_MODULE=x.settings env = HTTPS=on module = django.core.handlers.wsgi:WSGIHandler() disable-logging = true catch-exceptions = false post-buffering = 8192 harakiri = 30 harakiri-verbose = true vacuum = true listen = 500 optimize = 2 sysclt changes: # Increase TCP max buffer size setable using setsockopt() net.ipv4.tcp_rmem = 4096 87380 8388608 net.ipv4.tcp_wmem = 4096 87380 8388608 net.core.rmem_max = 8388608 net.core.wmem_max = 8388608 net.core.netdev_max_backlog = 5000 net.ipv4.tcp_max_syn_backlog = 5000 net.ipv4.tcp_window_scaling = 1 net.core.somaxconn = 2048 # Avoid a smurf attack net.ipv4.icmp_echo_ignore_broadcasts = 1 # Optimization for port usefor LBs # Increase system file descriptor limit fs.file-max = 65535 I did sysctl -p to enable changes. Idle server info: top - 13:34:58 up 102 days, 18:35, 1 user, load average: 0.00, 0.00, 0.00 Tasks: 118 total, 1 running, 117 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 3983068k total, 2125088k used, 1857980k free, 262528k buffers Swap: 2104504k total, 0k used, 2104504k free, 606996k cached free -m total used free shared buffers cached Mem: 3889 2075 1814 0 256 592 -/+ buffers/cache: 1226 2663 Swap: 2055 0 2055 **During the test:** top - 13:45:21 up 102 days, 18:46, 1 user, load average: 3.73, 1.51, 0.58 Tasks: 122 total, 8 running, 114 sleeping, 0 stopped, 0 zombie Cpu(s): 93.5%us, 5.2%sy, 0.0%ni, 0.2%id, 0.0%wa, 0.1%hi, 1.1%si, 0.0%st Mem: 3983068k total, 2127564k used, 1855504k free, 262580k buffers Swap: 2104504k total, 0k used, 2104504k free, 608760k cached free -m total used free shared buffers cached Mem: 3889 2125 1763 0 256 595 -/+ buffers/cache: 1274 2615 Swap: 2055 0 2055 iotop 30141 be/4 nginx 0.00 B/s 7.78 K/s 0.00 % 0.00 % nginx: wo~er process Where is the bottleneck ? Or what am I doing wrong ?

  Read the article

• Find out which task is generating a lot of context switches on linux

  - by Gaks

  According to vmstat, my Linux server (2xCore2 Duo 2.5 GHz) is constantly doing around 20k context switches per second. # vmstat 3 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 2 0 7292 249472 82340 2291972 0 0 0 0 0 0 7 13 79 0 0 0 7292 251808 82344 2291968 0 0 0 184 24 20090 1 1 99 0 0 0 7292 251876 82344 2291968 0 0 0 83 17 20157 1 0 99 0 0 0 7292 251876 82344 2291968 0 0 0 73 12 20116 1 0 99 0 ... but uptime shows small load: load average: 0.01, 0.02, 0.01 and top doesn't show any process with high %CPU usage. How do I find out what exactly is generating those context switches? Which process/thread? I tried to analyze pidstat output: # pidstat -w 10 1 12:39:13 PID cswch/s nvcswch/s Command 12:39:23 1 0.20 0.00 init 12:39:23 4 0.20 0.00 ksoftirqd/0 12:39:23 7 1.60 0.00 events/0 12:39:23 8 1.50 0.00 events/1 12:39:23 89 0.50 0.00 kblockd/0 12:39:23 90 0.30 0.00 kblockd/1 12:39:23 995 0.40 0.00 kirqd 12:39:23 997 0.60 0.00 kjournald 12:39:23 1146 0.20 0.00 svscan 12:39:23 2162 5.00 0.00 kjournald 12:39:23 2526 0.20 2.00 postgres 12:39:23 2530 1.00 0.30 postgres 12:39:23 2534 5.00 3.20 postgres 12:39:23 2536 1.40 1.70 postgres 12:39:23 12061 10.59 0.90 postgres 12:39:23 14442 1.50 2.20 postgres 12:39:23 15416 0.20 0.00 monitor 12:39:23 17289 0.10 0.00 syslogd 12:39:23 21776 0.40 0.30 postgres 12:39:23 23638 0.10 0.00 screen 12:39:23 25153 1.00 0.00 sshd 12:39:23 25185 86.61 0.00 daemon1 12:39:23 25190 12.19 35.86 postgres 12:39:23 25295 2.00 0.00 screen 12:39:23 25743 9.99 0.00 daemon2 12:39:23 25747 1.10 3.00 postgres 12:39:23 26968 5.09 0.80 postgres 12:39:23 26969 5.00 0.00 postgres 12:39:23 26970 1.10 0.20 postgres 12:39:23 26971 17.98 1.80 postgres 12:39:23 27607 0.90 0.40 postgres 12:39:23 29338 4.30 0.00 screen 12:39:23 31247 4.10 23.58 postgres 12:39:23 31249 82.92 34.77 postgres 12:39:23 31484 0.20 0.00 pdflush 12:39:23 32097 0.10 0.00 pidstat Looks like some postgresql tasks are doing 10 context swiches per second, but it doesn't all sum up to 20k anyway. Any idea how to dig a little deeper for an answer?

  Read the article

• Overclock Failed

  - by John

  This morning when I tried to turn on my computer, the monitor would not display anything. The computer is on, but no UI on the monitor and no beep. I turned off the computer and turn it back on again. This time, the computer was on for about 2 seconds and automatically turned itself off for about 2 second and automatically turned itself back on. This happened two times without the monitor displaying any UI. On the third try, the computer did the same thing but when it turned itself back on, the monitor displayed this: American Megatrends Asus P8P67 Le ACPI bios Revision 1011 CPU Intel Core i5 2500K CPU @ 3.30GHz Speed: 3300MHz Total Memory 4096 MB (DDR3-1333) USB Devices Total: 0 Drive, 1 Keyboard, 1 Mouse, 2 Hubs Detected ATA/ATAPI Deivces SATA6G_2 Hitachi HDs821010CLA 332 SATA3G_1 Corsair force 3 SSD SATA3G_2 HL-DT-ST DB-RE UH12CS28 Overclocking Failed! Please enter setup to reconfigure your system. Press F1 to Run Setup. After I pressed F1, it went into the Asus EF1 Bios Utility. I couldn't do anything in there so I just exited. After which, the computer auto turned off and on again and I was able to use the PC like regular. This has never happened to this computer before and the day before, nothing seemed wrong, just regular use and some gaming.

  Read the article

• How to eliminate the downtime when a dynamic IP address changes?

  - by xenon

  We currently have a number of client computers linked up to a database server (MS SQL 2008) for replication. The database server recognises the computers based on their Windows hostname. We are using dynamic IP addresses at this time because we tend to change the computers’ hardware quite frequently, and so the MAC address may be different. Unless static IP has a good way for us to manage frequent changing of MAC addresses, we are keeping it to dynamic IP. The problem with dynamic IP addresses, however, is that when a client fetches an new IP from the DHCP, ie, there is a change in the IP address, there is going to have a downtime for the hostname to reflect the new IP address, the client’s DNS cache of the hostname to reload, and also the server’s DNS cache to reload to see the new IP from the hostname. All of these have different timings and the delay can be really bad at times. Restarting the computer doesn't work all the time too. The clients are on Windows 7. How can I eliminate the amount of downtime required when there is a change in IP in the case of dynamic IP addresses?

  Read the article

• How Do I Secure WordPress Blogs Against Elemento_pcx Exploit?

  - by Volomike

  I have a client who has several WordPress 2.9.2 blogs that he hosts. They are getting a deface kind of hack with the Elemento_pcx exploit somehow. It drops these files in the root folder of the blog: -rw-r--r-- 1 userx userx 1459 Apr 16 04:25 default.htm -rw-r--r-- 1 userx userx 1459 Apr 16 04:25 default.php -rw-r--r-- 1 userx userx 1459 Apr 16 04:25 index.asp -rw-r--r-- 1 userx userx 1459 Apr 16 04:25 index.aspx -rw-r--r-- 1 userx userx 1459 Apr 16 04:25 index.htm -rw-r--r-- 1 userx userx 1459 Apr 16 04:25 index.html -rwxr-xr-x 1 userx userx 1459 Apr 16 04:25 index.php* It overwrites index.php. A keyword inside each file is "Elemento_pcx". It shows a white fist with a black background and the phrase "HACKED" in bold letters above it. We cannot determine how it gets in to do what it does. The wp-admin password isn't hard, but it's also not very easy either. I'll change it up a little to show you what the password sort of looks like: wviking10. Do you think it's using an engine to crack the password? If so, how come our server logs aren't flooded with wp-admin requests as it runs down a random password list? The wp-content folder has no changes inside it, but is run as chmod 777 because wp-cache required it. Also, the wp-content/cache folder is run as chmod 777 too.

  Read the article

• cPanel web servers mounting home partition to a NAS or SAN

  - by Scott

  I currently have 2 cPanel web servers that are little 1RU dual cpu quad core xeons. They have a lot of resources for processing and handling web requests, and never exceed more than 10% cpu usage. They also have plenty of RAM. The problem is though that they both have RAID 1 160Gb SAS hard disk drives in them that are 75% full, and growing by the day. I didnt think that the amount of disk usage would be so high, but due to the nature of the sites hosted, this has become an issue. The easy fix would be just to upgrade the hard drives to something bigger (probably not of the SAS variety), but I am thinking of keeping the current machines as "processing servers" and buying a central "storage server" with about 12TB of storage. The /home/ partition on each of the 1RU servers would be mounted to a NAS or SAN point on this central storage server. My questions are: - Has anyone got a cPanel setup where they mount /home/ to a NAS or SAN elsewhere? If so, can you provide details as to what you did and how it went :) - Any recommendations on networking? Is gigabit ethernet enough? Is TCP/IP going to be a noticable performance problem? Anyone used a TOE key? - Anyone benchmarked or had any performance issues with SAN over NAS? Any help greatly appreciated. Scott

  Read the article

• Running Windows Update inside Windowx XP Mode

  - by Noam Gal

  I am working on a Win 7 Ultimate machine, and was using XP for some development tasks (for compatibility checks). Everything worked like a charm on the XP, including updates. Two days ago I had to switch computer (mainly a new motherboard/cpu), and I had just stuck my old HD inside the newer case. Win 7 worked like a charm - installed all the new drivers, identified everything automatically, no sweat. The trouble started when I tried running my old XP mode - it won't launch, complaining about the cpu change. I figured it's not a big deal, and I deleted the VM, and re-ran XP mode. It told me it can't find it, and offered to create a new one, just what I wanted. I had finished setting up the new XP mode VM, and it seems to work just fine. Got it to use the host network adapter, so I can surf from "inside". But I can't get Windows Update to run. Whenever I click on the "Custom" button on the WU site, after a short while, I get the [Error number: 0x80072EFD] page. I tried several solution from around the web for it (clearing some cache and restarting the wuauserv, even a microsoft fix-it run), but still nothing seems to work. Anyone here has any new tip for me? Thanks.

  Read the article

• java.lang.OutOfMemoryError: unable to create new native thread

  - by Brad

  I consistently get this exception when trying to run my Junit tests on my mac: java.lang.OutOfMemoryError: unable to create new native thread at java.lang.Thread.start0(Native Method) at java.lang.Thread.start(Thread.java:658) at java.util.concurrent.ThreadPoolExecutor.addIfUnderMaximumPoolSize(ThreadPoolExecutor.java:727) at java.util.concurrent.ThreadPoolExecutor.execute(ThreadPoolExecutor.java:657) at java.util.concurrent.AbstractExecutorService.submit(AbstractExecutorService.java:92) at com.google.appengine.tools.development.ApiProxyLocalImpl$PrivilegedApiAction.run(ApiProxyLocalImpl.java:197) at com.google.appengine.tools.development.ApiProxyLocalImpl$PrivilegedApiAction.run(ApiProxyLocalImpl.java:184) at java.security.AccessController.doPrivileged(Native Method) at com.google.appengine.tools.development.ApiProxyLocalImpl.doAsyncCall(ApiProxyLocalImpl.java:172) at com.google.appengine.tools.development.ApiProxyLocalImpl.makeAsyncCall(ApiProxyLocalImpl.java:138) The same set of unit tests pass perfectly fine on ubuntu and windows. Some information about my system resources on the mac: $ ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited file size (blocks, -f) unlimited max locked memory (kbytes, -l) unlimited max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 1 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 266 virtual memory (kbytes, -v) unlimited $ java -version java version "1.6.0_24" Java(TM) SE Runtime Environment (build 1.6.0_24-b07-334-10M3326) Java HotSpot(TM) 64-Bit Server VM (build 19.1-b02-334, mixed mode) The reason I dont think this is an application issue is because the same tests pass in different environments. I have tried setting heap to 1024m, 512m and setting the stack to 64k and 128k (and each of these combinations) with no luck. My open files was originally 256 and I have bumped this to 1024. I have been googling around for a bit and all posts say to decrease heap size and increase stack size but that doesnt seem to help. Anyone have anymore ideas? EDIT: Here are is some environment information on my ubuntu box: $ ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 20 file size (blocks, -f) unlimited pending signals (-i) 16382 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) unlimited virtual memory (kbytes, -v) unlimited file locks (-x) unlimited $ java -version java version "1.6.0_24" Java(TM) SE Runtime Environment (build 1.6.0_24-b07) Java HotSpot(TM) 64-Bit Server VM (build 19.1-b02, mixed mode)

  Read the article

< Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >