Search Results

Search found 8037 results on 322 pages for 'hardware hacking'.

Page 198/322 | < Previous Page | 194 195 196 197 198 199 200 201 202 203 204 205  | Next Page >

• Problem with Lenovo x200s Wifi under Ubutu Karmic

  - by oneself

  Hi, I have just gotten my Lenovo X200s laptop, and I am install Ubuntu 9.10 Karmic on it. The installation went through without a hitch, but I can't get my wifi to work. lspci | grep Network Produces the following results: 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10) The weird part is that when I turn the wifi hardware stitch on and off on the side of the laptop, I get the following printed in /var/log messages: Dec 30 23:24:48 temp-laptop kernel: [ 213.432302] usb 4-2: USB disconnect, address 2 Dec 30 23:24:52 temp-laptop kernel: [ 217.276310] usb 4-2: new full speed USB device using uhci_hcd and address 3 Dec 30 23:24:52 temp-laptop kernel: [ 217.441759] usb 4-2: configuration #1 chosen from 1 choice Does Ubuntu think my wifi card is a USB device? Am I missing some driver? What can I do to fix this? Please, help!

  Read the article

• Wake network adapter from deep sleep mode

  - by BeatMe

  I recently buyed a new Mainboard (Asrock ALiveXFire) and got some trouble with the network adapter. After switching my Windows 7 x64 in energey saving mode and returning from it, my network adapter couldn't be found. After some googling I found out, that apparently my network adapter has been put in a deep sleep mode and didn't reactivate. Their solution was to switch the PC off, take out the RAM and the CMOS battery for some time. After that, the adapter should be powered on again, but that didn't happen for me. I waited several hours before turning my PC on again, but that didn't help. Formatting and reinstalling didn't help either. The network adapter is not found in the hardware manager and reinstalling the drivers didn't help. I have the newest BIOS installed on the mainboard. I literally don't know what to try next. I'm thinking of returning my board, but I would like to avoid the hassle.

  Read the article

• Sizing a Virtual Server

  - by vdubs

  I would like to replace four aging physical servers with one virtual server. What is the best way to insure the VM server is sized correctly? The requirements of the apps that will be running on the four servers are APPLICATION SERVERS - QTY 3 - These will run the application layer for the web server, Business Objects Business Intelligence app, and various other small client server apps. The three most heavy hitting apps each have the following server requirements. So, if I bought three physical servers, this would be the requirements for each of them Processor - Dual 2.83 GHZ (or faster) Ram - 4 GB Raid 5 - 50-100GB usable space NIC - 1 GB Web Server - this will run one asp.net e-business app that will talk to our dedicated SQL server and the three app servers above. The E-Business software has these requirements for the web server Processor - Quad 2.83 GHZ (or faster) Ram - 8 GB Raid 5 - 50-100GB usable space NIC - 1 GB What is the best tool to determine what I need from a hardware standpoing in a virtual server? I am planning on using VMWare.

  Read the article

• best filesystem for an aws s3 like service

  - by gucki

  Hi! I need to build a fault tolerant, highly available key/value storage (no posix, only same functionaluty as S3) using cheap existing hardware. The storage should be able to handle several billions of items. The maximum size of items is around 1GB, most are only several KB. What's the best software/ filesystem for this task? I already had a brief look at mogilefs, mongodb (grid-fs) & glusterfs but I'm not really sure which is stable & fault tolerant enough. The simpler the setup and later expansion the better :). Corin

  Read the article

• Apache port forwarding with ZTE ZXV10 W300 router (provider specific firmware)

  - by dannote

  I'm trying to configure port forwarding for Apache 2.2 installed on Windows XP SP3 with ZTE ZXV10 W300 router. The computer has a static IP 192.168.1.2. Port forwarding is configured as following: Enable true Name Apache Protocol TCP (also tried TCP and UPD) WAN Host Start IP Address empty WAN Host End IP Address empty WAN Connection stream WAN Start Port 8080 WAN End Port 8080 LAN Host IP Address 192.168.1.2 LAN Host Start Port 8080 LAN Host End Port 8080 Port 8080 is open for both TCP and UPD in Windows Brandmauer. Apache configuration: Listen 192.168.1.2:8080 Router Firmware: Hardware Version V1.0.01 Software Version V8.0.02T03_CFA Boot Loader Version V1.1.2 The provider is COMSTAR. I'm not sure but it's said they flash routers with modified firmware. I have also tried to set up Bitcomet port forwarding on port 13514 and failed.

  Read the article

• Probability of failure with larger number of network elements

  - by MikeKulls

  I'm having a discussion with a work colleague. I'm saying that a network with 100 elements will have pretty much 10 times as many failures as a network with 10 elements, ie a tech will need to replace faulty hardware 10 times more often. He suggests that the failure rate doesn't go up in a linear fashion and the failure rate will be significantly less than 10x, in fact only slightly more failures. This is not the probability of an outage etc, we are just talking in relation to the amount of parts that a tech would need to swap out in a given time frame.

  Read the article

• MySQL-5.5.10 - Lost connection to MySQL server during query (Both Web Clients and MySQL Slaves)

  - by kwiksand

  We've just upgraded our existing MySQL5.1 DB servers to newer (much better) hardware with MySQL 5.5, and things have been going mostly smoothly for almost 6 weeks. Just the last few days, I've noticed a few errors, such as: From a MySQL Slave: [ERROR] Error reading packet from server: Lost connection to MySQL server during query ( server_errno=2013) Or From Apache/Other: Lost connection to MySQL server at 'reading initial communication packet', system error: 110 At one point this evening, many webnodes reported this error for a three minute period (many such reports as this was in a busy period). However, the issues don't appear to correspond with any times of extreme load. For all intents and purposes, the connection/thread load on MySQL is at a normal rate (between about 10 and 40 connected threads), and Web load has been a LOT higher at times over the last few weeks. Could there bee other reasons for these connection errors, that I'm not seeing?

  Read the article

• What are the "software" requirements for a 3D video?

  - by Diogo Rocha

  Today, looking for the technical explanations about MPEG4, I saw that it can implement the VRML rendering for a 3D video. This makes me wondering about the "software" requirements to make or to see a 3D video. I mean, assuming that I have all the "hardware" requirements(3D monitor, VGA, 3D-camera, etc), what should I need to make and see 3D videos looking over the "software" side? Must I need to make it on MPEG4 instead MPEG1 or MPEG2 because of the VRML support? May I need a specifc 3D codec to open and see 3D videos?? Until today, I believed that a 3D video was just a regular/ordinary video composed of 2 "overlapping layers". PS: This is the first time I'm researching about technical explanations/references about MPEG standards and 3D videos, any help or basic explanations will help.

  Read the article

• Flexible virtualization infrastructure Design with libvirt

  - by Lessfoe

  I'm going to install a CentOS6 Server with Virtualization ( libvirtd ) capabilities on a DELL Server with Hardware RAID5 of around 6T of disk space ( It has 4x2T disks in a PERC700 RAID Controller ). I'm going then to install some guests which requires few resources except one that needs 500GB of disk space, 8/16GB of RAM and good performances. I was thinking about file images for guests storage but I'm not sure about the 500GB VM what needs good performances so that an LVM device could be better. So my question is what would be the best layout concerning: RAID setup ( RAID5, RAID1 + 1 disk for OS only. ) disk partitioning ( using the entire disk/ leave free space for future use and extending it with LVM ) guests storage management ( LVM devices or file images ( considering the 500GB VM that is performance demanding ) or mixed ) Where to put guests storage? /var/lib/libvirt/images or maybe in a custom dir separated from system /home/VMs Thanks in advance for any hint.

  Read the article

• Disabling a touchpad in Windows

  - by Shamaoke

  I want to permanently disable a touchpad in Windows running on my laptop, since firstly, I use a mouse, and secondly, when I work, I often touch it accidentally what causes definite inconviniences. I tried the following approaches to disable it but with no result: Turned it off through BIOS — there's no such function there; Turned it off through the touchpad configuration utility — there's no such function there; Turned it off through the device manager — the disable button is inactive; Turned it off through a hotkey (Fn + F1 in my case) — the hotkey doesn't work; Uninstalled the proprietary driver — Windows automatically downloaded the standard driver; Uninstalled the standard driver and turned off the automatic driver download function (Win + R ? "systempropertiesadvanced" ? Hardware ? Device Installation Settings) — all the same, Windows downloaded and installed the driver. How can I disable a touchpad? Windows 7; the Alps touchpad.

  Read the article

• Macbook pro asks me to "Service Battery"

  - by Uwe Honekamp

  A couple of weeks ago I checked the battery and at that point in time (after 160 load cycles) it still had a capacity of 5000 mAh. Today, my 2006 macbook pro tells me via the battery menu to "Service Battery". According to Coconut Battery the current capacity is only 1590 mAh. The corresponding help text suggests contacting an Apple Authorized Service Provider (AASP) to have the computer checked. Before I decide to throw money at the AASP I'd like to understand what the AASP could possibly do to eliminate the problem. Isn't it more likely that the battery simply broke at 160 cycles and needs to be replaced? Are there any means by software or firmware to influence battery behavior? Of course, the computer hardware might be broken but how could this result in the described effect? And yes, I'm currently trying a calibration cycle but I have some doubts that it will save the day.

  Read the article

• Unlocking AMD Phenom II X2 550 Black Edition cores - what are the risks?

  - by Vilx-

  I've got the above mentioned CPU and a GigaByte GA-MA790XT-UD4P motherboard, which should be capable of unlocking the extra two cores - if I'm lucky and they're not faulty. The Internet is full of instructions on how to do that. What I don't have is spare money to buy new hardware if I brick something. What are the risks when attempting to do this? Is it completely safe, or can I be left with an expensive pile of junk? What should I keep in mind when doing so? Bigger cooler maybe (I'm running with the default box cooler)? Should I lower the frequencies too? I've never done any OC before.

  Read the article

• sound volume increase beyond 100% whenever possible on linux

  - by fakedrake

  Some audio output from files or streams is too low. It is obvious that hardware is able to play the same sounds but louder but because of the data it just plays it at some low level even at 100% volume. Vlc can generally increase the volume of a file up to 200%. Is there a way to do the same thing VLC does system-wide and if possible for an arbitrary v percentage value. If there is no application that does this, where should i look into for libs to do it myself or what code should i modify(eg code in the alsamixer) thank you

  Read the article

• "broken" windows xp after disc replacement

  - by epeleg

  Windows xp pro OEM was installed on my machine, Disk was failing so I cloned it to a new disk (larger one). Now windows said that the hardware has changed significantly and I need to re-activate, and I would gladly do (got the product number on a sticker on the machine) - only that for running the activation process I need to be logged-in, but when I try to login it just automatically logs me out again :( I know my credentials are O.K. because I can connect to the machine remotely and also use sysinternals tools such as PsExec or PSList etc. on it from a remote machine by specifying user and pasword. Login via safemode does not work any differently then in normal mode... I tried to run rundll32.exe syssetup,SetupOobeBnk (as suggested in several places on the net) using PsExec but it did not seem to help... Is there any way out of this evil circle? [ can't log in because not activated - cant activate because not logged in ]

  Read the article

• OpenVZ multiple networks on CTs

  - by picca

  I have Hardware Node (HN) which has 2 physical interfaces (eth0, eth1). I'm playing with OpenVZ and want to let my containers (CTs) have access to both of those interfaces. I'm using basic configuration - venet. CTs are fine to access eth0 (public interface). But I can't get CTs to get access to eth1 (private network). I tried: # on HN vzctl set 101 --ipadd 192.168.1.101 --save vzctl enter 101 ping 192.168.1.2 # no response here ifconfig # on CT returns lo (127.0.0.1), venet0 (127.0.0.1), venet0:0 (95.168.xxx.xxx), venet0:1 (192.168.1.101) I believe that the main problem is that all packets flows through eth0 on HN (figured out using tcpdump). So the problem might be in routes on HN. Or is my logic here all wrong? I just need access to both interfaces (networks) on HN from CTs. Nothing complicated.

  Read the article

• Windows SBS 2011 DNS Role (service) failing & needing restarting

  - by HaydnWVN

  Have a Windows SBS 2011 with Exchange that is handling all DNS for the network. Since getting a 3rd party (Hardware & Support) to setup a recieving FTP service and restricting Exchanges memory useage for another 3rd party product (Stock software) the local network seems to periodically 'lose the internet connection'. Delving deeper I found that the DNS service is somehow failing/stopping without the actual service on the server reporting such (nothing in event logs). A simple restart of the 'DNS Role' on the server solves the problem. The manager onsite reports that he has to do this most days in the afternoon - yet not at the same time and other days it works fine without a restart being required. I'm unable (lacking sufficient SBS2011 knowledge) to diagnose this further, ideally I would like the DNS Role to report (and log) the failure, then automatically restart itself.

  Read the article

• Classic ASP on large memory server

  - by Steve Evans

  I have a client with a large ASP app that apparently is fairly memory intensive. I’m helping them migrate to new hardware they have running Win2k8 R2. They have 4 physical servers with 32gb of RAM each. I’m making the assumption that ASP apps run as a x32 process. So I see that we have two options: On the application pool enable web gardens. Use the physical servers as VM hosts and split the box into say 4 web servers each. Any thoughts on which path will provide us better performance? I’m just not really sure how ASP will handle a machine with lots of memory, and I’m worried it won’t really be able to address the memory well. (you can ignore all the obvious stuff like increased maintenance of 16 web servers vs 4, or the flexibility virtualization gets us over physical servers, etc)

  Read the article

• Digital Blue Digital Movie Creator 3.0 driver

  - by user27977

  I'm having a complete 'mare of a time trying to use my schools Digital Blue cameras. We've got the model 3 ones, but can't find the driver disc and using the Windows Hardware Installation Wizard gets me no where! Can you help me to find the driver? When I've used it at my old school it had a piece of software called the Digital Movie Creator, which I've heard you can use to make stop-motion films, which is what I want to do! This is what it looks like http://www.amazon.co.uk/Digital-Movie-Creator-1GB-Card/dp/B000LP30LA/ref=sr_1_2?ie=UTF8&s=software&qid=1265928833&sr=1-2

  Read the article

• Links to detailed instructions on building a DIY NAS

  - by Kaushik Gopal

  I'm looking for good links with detailed instructions on how to build a DIY NAS (Network Access Storage). I'm planning on doing it cheap (old PC config + open source software). I did a fair bit of searching and found these links (so please suggest others). Ubuntu Setting up a Home NAS DIY NAS Smackdown How to Configure an $80 File Server in 45 Minutes FreeNAS Build a NAS Device With an Old PC and Free Software Build Your Own NAS Device While these links are great they delve more on the hardware side. I'm looking for more instructions in the software side.

  Read the article

• unable to install new versions of linux on my PC

  - by iamrohitbanga

  I have an MSI-RC410 motherboard with onboard ATI Radeon XPress 200 series Graphics card. I have used OpenSuse-11.0 on my PC for over an year. but when I tried to upgrade to OpenSuse-11.1, I managed to install it only to find that several features were missing. for example /dev/cdrom was missing. Also install DVD of Fedora 11 did not work. I have also tried Ubuntu-9.10 live cd. When I boot from the CD i get the initramfs command prompt. Still able to install old versions of these OSs. What is the reason for this behavior? Does it have to do anything with the new version of the linux kernel not being compatible with my hardware? What should i do to install new versions of Linux?

  Read the article

• Windows XP loses drive letter for existing partition on disk

  - by Kev

  Hi, apologies if this has already been asked - I couldn't spot anything exactly the same. I'm looking for help on the fact that Windows XP has suddenly decided to stop assigning a drive letter to the second partition on my laptop's disk. I haven't added or changed hardware and I keep everything pretty clean in terms of software installed. I've partitioned the disk into a system partition on C: and a user partition on d: but lately, when booting or coming out of hibernation or sometime from stand-by, Windows will lose it's d: mapping. If I notice and remap it from MMC, everything will be perfectly happy and will keep going. Any help on this will be greatly appreciated. Cheers, Kev

  Read the article

• Cannot import video from a DV camcorder over FireWire

  - by qbeuek

  I have a JVC GR-D320 miniDV camcorder that has a FireWire interface. I recently upgraded to Windows 7 RTM (64 bit, fresh installation). When I connect my camcorder through FireWire, I can see it in Device Manager without any warnings or problems, but I cannot capture videos from my miniDV tapes. After connecting, AutoPlay displays "Import Video could not find a compatible digital video device. Verify that the digital video device is properly connected and turned on." When using Windows Live Photo Gallery after selecting the import option, my camera is not listed. The camera used to work perfectly on the same hardware before upgrading to Windows 7 RTM 64 bit (it used to work fine on Windows XP SP3 32 bit). Googleing revealed that people had the exact same problems in Vista, but no solution was provided. Any help?

  Read the article

• Ultra Low Latency Linux Distribution or Kernel

  - by Zanler

  I'd like to know if there are any linux distributions that are focused on low latency networking. The area I'm working in is algorithmic trading, and extremely low latency comms between machines is a must. The current h/w we're using is 10g ethernet, we're looking into things like infiniband RDMA and Voltaire VMA I've googled around, and have only been able to find tidbtits of kernel patches, command line options and hardware suggestions. I'm looking for a complete solution, specially built kernel, kernel bypass features, essentially all the goodies rolled up into one package - does such a thing even exist? I ask as a lot of this stuff seems to be a black art, people keep secret what they know works etc.

  Read the article

• Ultra Low Latency Linux Distribution or Kernel

  - by Zanlor

  I'd like to know if there are any linux distributions that are focused on low latency networking. The area I'm working in is algorithmic trading, and extremely low latency comms between machines is a must. The current h/w we're using is 10g ethernet, we're looking into things like infiniband RDMA and Voltaire VMA I've googled around, and have only been able to find tidbtits of kernel patches, command line options and hardware suggestions. I'm looking for a complete solution, specially built kernel, kernel bypass features, essentially all the goodies rolled up into one package - does such a thing even exist? I ask as a lot of this stuff seems to be a black art, people keep secret what they know works etc.

  Read the article

• Resize NTFS System Partition on Perc 6/i RAID

  - by Cipher42

  I've inherited a Dell server that is running out of space on C:. I'd like to quickly and painlessly resize the C drive with partitioning software. However, the RAID card is causing me some troubles. I've resized plenty of desktops in my time, but never a server with hardware RAID. Can anyone recommend software that is GUARANTEED to work with the Dell PERC 6/i? Hopefully someone has resized the system partition with this RAID card before! :) Of course, proper backups are available but I'd be more comfortable with a tried and true solution to save the headache of the restore.... Thanks in advance!

  Read the article

< Previous Page | 194 195 196 197 198 199 200 201 202 203 204 205  | Next Page >